Debian Codegraph @

doc/locale/ja/LC_MESSAGES/news/10.po

raw
1 # -*- po -*-
2 # Japanese translations for 1.2.4 package.
3 # Copyright (C) 2009-2011, Brazil, Inc
4 # This file is distributed under the same license as the groonga package.
5 # Kouhei Sutou <[email protected]>, 2011.
6 #
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: 1.2.4\n"
10 "Report-Msgid-Bugs-To: \n"
11 "PO-Revision-Date: 2023-07-24 12:44+0900\n"
12 "Language-Team: Japanese\n"
13 "Language: ja\n"
14 "MIME-Version: 1.0\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17 "Plural-Forms: nplurals=1; plural=0;\n"
18
19 msgid "News - 10 series"
20 msgstr "お知らせ - 10系"
21
22 msgid "Release 10.1.1 - 2021-01-25"
23 msgstr "10.1.1リリース - 2021-01-25"
24
25 msgid "Improvements"
26 msgstr "改良"
27
28 msgid "[:doc:`/reference/commands/select`] Added support for outputting UInt64 value in Apache Arrow format."
29 msgstr "[:doc:`/reference/commands/select`] Apache Arrow形式でUInt64の値の出力をサポートしました。"
30
31 msgid "[:doc:`/reference/commands/select`] Added support for outputting a number of hits in Apache Arrow format as below."
32 msgstr "[:doc:`/reference/commands/select`] Apache Arrow形式で以下のようにヒット数の出力をサポートしました。"
33
34 msgid "[:doc:`/reference/functions/query`] Added support for optimization of \"order by estimated size\"."
35 msgstr "[:doc:`/reference/functions/query`] \"order by estimated size\" の最適化をサポートしました。"
36
37 msgid "Normally, we can search at high speed when we first execute a condition which number of hits is a little."
38 msgstr "通常、ヒット数の少ない条件から最初に実行すると、高速に検索できます。"
39
40 msgid "The \"B (There are few) && A (There are many)\" faster than \"A (There are many) && B (There are few)\"."
41 msgstr "\"A (ヒット数が多い) && B (ヒット数が少ない)\" より \"B (ヒット数が少ない) && A (ヒット数が多い)\" 方が高速です。"
42
43 msgid "This is a known optimization. However we need reorder conditions by ourselves."
44 msgstr "これは、よく知られた最適化ですが、自分で条件を並び替える必要があります。"
45
46 msgid "Groonga executes this reorder automatically by using optimization of \"order by estimated size\"."
47 msgstr "Groongaは、 \"order by estimated size\" の最適化を使うことで、自動的にこの並び替えを実行します。"
48
49 msgid "This optimization is valid by ``GRN_ORDER_BY_ESTIMATED_SIZE_ENABLE=yes``."
50 msgstr "この最適化は、 ``GRN_ORDER_BY_ESTIMATED_SIZE_ENABLE=yes`` で有効になります。"
51
52 msgid "[:doc:`/reference/functions/between`] Improved performance by the following improvements."
53 msgstr "[:doc:`/reference/functions/between`] 以下の改良で、パフォーマンスを改善しました。"
54
55 msgid "Improved the accuracy of a decision whether the ``between()`` use sequential search or not."
56 msgstr "``between()`` でシーケンシャルサーチを使うかどうかの判断の精度を改善しました。"
57
58 msgid "Improved that we set a result of ``between()`` into a result set in bulk."
59 msgstr "``between()`` の結果を結果セットに一度にセットするよう改善しました。"
60
61 msgid "[:doc:`/reference/commands/select`] Improved performance for a prefix search."
62 msgstr "[:doc:`/reference/commands/select`] 前方一致検索のパフォーマンスを改善しました。"
63
64 msgid "For example, the performance of the following prefix search by using \"*\" improved."
65 msgstr "例えば、以下のような \"*\" を使った前方一致検索のパフォーマンスが向上します。"
66
67 msgid "[:doc:`/reference/tokenizers`][TokenMecab] Improved performance for parallel construction fo token column. [GitHub#1158][Patched by naoa]"
68 msgstr "[:doc:`/reference/tokenizers`][TokenMecab] トークンカラムを並列で構築する際のパフォーマンスを改善しました。 [GitHub#1158][naoaさんがパッチ提供]"
69
70 msgid "Fixes"
71 msgstr "修正"
72
73 msgid "[:doc:`/reference/functions/sub_filter`] Fixed a bug that ``sub_filter`` doesn't work in ``slices[].filter``."
74 msgstr "[:doc:`/reference/functions/sub_filter`] ``slices[].filter`` 内で ``sub_filter`` が動作しない問題を修正しました。"
75
76 msgid "For example, the result of ``sub_filter`` was 0 records by the following query by this bug."
77 msgstr "例えば、以下のクエリーでは、この問題によって、 ``sub_filter`` の結果は0件になります。"
78
79 msgid "Fixed a bug that it is possible that we can't add data and Groonga crash when we repeat much addition of data and deletion of data against a hash table."
80 msgstr "ハッシュテーブルに対して、繰り返し大量のデータを追加、削除すると、Groongaがクラッシュしたり、データの追加ができなくなる可能性がある問題を修正しました。"
81
82 msgid "Thanks"
83 msgstr "感謝"
84
85 msgid "naoa"
86 msgstr "naoaさん"
87
88 msgid "Release 10.1.0 - 2020-12-29"
89 msgstr "10.1.0リリース - 2020-12-29"
90
91 msgid "[:doc:`/reference/functions/highlight_html`] Added support for removing leading full width spaces from highlight target. [PGroonga#GitHub#155][Reported by Hung Nguyen V]"
92 msgstr "[:doc:`/reference/functions/highlight_html`] 全角スペースをハイライト対処から除外しました。[PGroonga#GitHub#155][Hung Nguyen Vさんが報告]"
93
94 msgid "Until now, leading full width spaces had also included in the target of highlight as below."
95 msgstr "今までは、以下のように先頭の全角スペースも含めてハイライト対象としていました。"
96
97 msgid "However, this is needless as the target of highlight. Therefore, in this release, ``highlight_html()`` removes leading full width spaces."
98 msgstr "しかし、この全角スペースはハイライト対象としては不要です。そのため、このリリースから ``highlight_html()`` は先頭の全角スペースを削除します。"
99
100 msgid "[:doc:`/reference/commands/status`] Added a new item ``features``."
101 msgstr "[:doc:`/reference/commands/status`] 新しい項目 ``features`` を追加しました。"
102
103 msgid "We can display which Groonga's features are enabled as below."
104 msgstr "以下のように、Groongaのどの機能が有効なのかを表示できます。"
105
106 msgid "[:doc:`/reference/commands/status`] Added a new item ``apache_arrow``."
107 msgstr "[:doc:`/reference/commands/status`] 新しい項目 ``apache_arrow`` を追加しました。"
108
109 msgid "We can display Apache Arrow version that Groonga use as below."
110 msgstr "以下のようにGroongaが使うApache Arrowのバージョンを表示できます。"
111
112 msgid "This item only display when Apache Arrow is valid in Groonga."
113 msgstr "この項目は、Apache Arrowが有効な場合にのみ表示されます。"
114
115 msgid "[:doc:`/reference/window_function`] Added support for processing all tables at once even if target tables straddle a shard. (experimental)"
116 msgstr "[:doc:`/reference/window_function`] 対象のテーブルがシャードをまたいでいる場合でも、全てのテーブルを一度に処理するようにしました。(実験的) "
117
118 msgid "If the target tables straddle a shard, the window function had processed each shard until now."
119 msgstr "今まで、対象のテーブルがシャードをまたいでいた場合、ウインドウ関数はシャード毎に処理をしていました。"
120
121 msgid "Therefore, if we used multiple group keys in windows functions, the value of the group keys from the second had to be one kind of value."
122 msgstr "そのため、複数のグループキーを使う場合、2番目以降のグループキーの値は1種類でなければなりませんでした。"
123
124 msgid "However, we can use multiple kind of values for it as below by this improvement."
125 msgstr "この改良によって、以下のように複数の種類の値を2番目以降のグループキーで使用できるようになります。"
126
127 msgid "This feature requires Apache Arrow 3.0.0 that is not released yet."
128 msgstr "この機能には、まだリリースされていない、Apache Arrow 3.0.0が必要です。"
129
130 msgid "Added support for sequential search against reference column."
131 msgstr "参照カラムに対する検索でシーケンシャルサーチをサポートしました。"
132
133 msgid "This feature is only used if an index search will match many records and the current result set is enough small."
134 msgstr "この機能は、インデックス検索でたくさんのレコードがマッチした場合、かつ結果セットが十分小さい場合にのみ使われます。"
135
136 msgid "Because the sequential search is faster than the index search in the above case."
137 msgstr "上記のケースでは、インデックス検索よりもシーケンシャルサーチの方が速いためです。"
138
139 msgid "It is invalid by default."
140 msgstr "この機能はデフォルトでは無効です。"
141
142 msgid "It is valid if we set ``GRN_II_SELECT_TOO_MANY_INDEX_MATCH_RATIO_REFERENCE`` environment variable."
143 msgstr "この機能は、環境変数 ``GRN_II_SELECT_TOO_MANY_INDEX_MATCH_RATIO_REFERENCE`` を設定することで有効になります。"
144
145 msgid "``GRN_II_SELECT_TOO_MANY_INDEX_MATCH_RATIO_REFERENCE`` environment variable is a threshold to switch the sequential search from the index search."
146 msgstr "環境変数 ``GRN_II_SELECT_TOO_MANY_INDEX_MATCH_RATIO_REFERENCE`` はインデックス検索からシーケンシャルサーチに切り替えるためのしきい値です。"
147
148 msgid "For example, if we set ``GRN_II_SELECT_TOO_MANY_INDEX_MATCH_RATIO_REFERENCE=0.7`` as below, if the number of records for the result set less than 70 % of total records, a search is executed by a sequential search."
149 msgstr "例えば、以下のように ``GRN_II_SELECT_TOO_MANY_INDEX_MATCH_RATIO_REFERENCE=0.7`` とセットした場合、結果セットのレコード数が、総レコード数の70%以下の場合にシーケンシャルサーチで検索します。"
150
151 msgid "[tokenizers] Added support for the token column into ``TokenDocumentVectorTFIDF`` and ``TokenDocumentVectorBM25``."
152 msgstr "[tokenizers] ``TokenDocumentVectorTFIDF`` と ``TokenDocumentVectorBM25`` でトークンカラムをサポートしました。"
153
154 msgid "If there is the token column that has the same source as the index column, these tokenizer use the token id of the token column."
155 msgstr "インデックスカラムと同じソースを持つトークンカラムがある場合、これらのトークナイザーは、トークンカラムのトークンIDを使います。"
156
157 msgid "The token column has already had data that has already finished tokenize."
158 msgstr "トークンカラムは、既にトークナイズ済みのデータを持っています。"
159
160 msgid "Therefore, these tokenizer are improved performance by using a token column."
161 msgstr "そのため、トークンカラムを使うことによって、これらのトークナイザーのパフォーマンスが改善されます。"
162
163 msgid "For example, we can use this feature by making a token column named ``content_tokens`` as below."
164 msgstr "例えば、以下のように、 ``content_tokens`` というトークンカラムを作ることで、この機能を使えます。"
165
166 msgid "``TokenDocumentVectorTFIDF`` and ``TokenDocumentVectorBM25`` give a weight against each tokens."
167 msgstr "``TokenDocumentVectorTFIDF`` と ``TokenDocumentVectorBM25`` は、各トークンに対して重みをつけます。 "
168
169 msgid "``TokenDocumentVectorTFIDF`` calculate a weight for token by using TF-IDF."
170 msgstr "``TokenDocumentVectorTFIDF`` は、TF-IDFを使ってトークンの重みを計算します。"
171
172 msgid "Please refer to https://radimrehurek.com/gensim/models/tfidfmodel.html about TF-IDF."
173 msgstr "TF-IDFについては、 https://radimrehurek.com/gensim/models/tfidfmodel.html を参照してください。"
174
175 msgid "``TokenDocumentVectorBM25`` calculate a weight for token by using Okapi BM25."
176 msgstr "``TokenDocumentVectorBM25`` は、Okapi BM25を使ってトークンの重みを計算します。"
177
178 msgid "Please refer to https://en.wikipedia.org/wiki/Okapi_BM25 about Okapi BM25."
179 msgstr "Okapi BM25については、 https://en.wikipedia.org/wiki/Okapi_BM25 を参照してください。"
180
181 msgid "Improved performance when below case."
182 msgstr "以下のケースのパフォーマンスを改善しました。"
183
184 msgid "``(column @ \"value\") && (column @ \"value\")``"
185 msgstr ""
186
187 msgid "[:doc:`/install/ubuntu`] Added support for Ubuntu 20.10 (Groovy Gorilla)."
188 msgstr "[:doc:`/install/ubuntu`] Ubuntu 20.10 (Groovy Gorilla)をサポートしました。"
189
190 msgid "[:doc:`/install/debian`] Dropped stretch support."
191 msgstr "[:doc:`/install/debian`] stretchのサポートをやめました。"
192
193 msgid "It reached EOL."
194 msgstr "EOLになったためです。"
195
196 msgid "[:doc:`/install/centos`] Dropped CentOS 6."
197 msgstr "[:doc:`/install/centos`] CentOS 6のサポートをやめました。"
198
199 msgid "[httpd] Updated bundled nginx to 1.19.6."
200 msgstr "[httpd] バンドルしているnginxのバージョンを1.19.6に更新しました。"
201
202 msgid "Fixed a bug that Groonga crash when we use multiple keys drilldown and use multiple accessor as below. [GitHub#1153][Patched by naoa]"
203 msgstr "以下のように、複数のドリルダウンのキーと複数のアクセサーを使用した時にGroongaがクラッシュする問題を修正しました。[GitHub#1153][naoaさんがパッチ提供]"
204
205 msgid "Fixed a bug that the near phrase search did not match when the same phrase occurs multiple times as below."
206 msgstr "以下のように、同じフレーズが複数回出現すると、近傍フレーズ検索がマッチしない問題を修正しました。"
207
208 msgid "Hung Nguyen V"
209 msgstr "Hung Nguyen Vさん"
210
211 msgid "timgates42 [Provided the patch at GitHub#1155]"
212 msgstr "timgates42さん [GitHub#1155にてパッチ提供]"
213
214 msgid "Release 10.0.9 - 2020-12-01"
215 msgstr "10.0.9リリース - 2020-12-01"
216
217 msgid "Improved performance when we specified ``-1`` to ``limit``."
218 msgstr "``limit`` に ``-1`` を指定した時のパフォーマンスを改善しました。"
219
220 msgid "[:doc:`/reference/commands/reference_acquire`] Added a new option ``--auto_release_count``."
221 msgstr "[:doc:`/reference/commands/reference_acquire`] 新しいオプション ``--auto_release_count`` を追加しました。"
222
223 msgid "Groonga reduces a reference count automatically when a request reaching the number of value that is specified in ``--auto_release_count``."
224 msgstr "Groongaは、リクエストが ``--auto_release_count`` で指定された値に到達した時に自動的に参照カウントを減らします。"
225
226 msgid "For example, the acquired reference of ``Users`` is released automatically after the second ``status`` is processed as below."
227 msgstr "例えば、以下のように、取得した ``User`` の参照は、2番目の ``status`` が処理された後に自動的に解放されます。"
228
229 msgid "We can prevent a leak of the release of acquired reference by this option."
230 msgstr "このオプションで、取得した参照の解放漏れを防げます。"
231
232 msgid "Modify behavior when Groonga evaluated empty ``vector`` and ``uvector``."
233 msgstr "Groongaが空の ``vector`` や ``uvector`` を評価した時の動作を変更しました。"
234
235 msgid "Empty ``vector`` and ``uvector`` are evaluated to ``false`` in command version 3."
236 msgstr "空の ``vector`` と ``uvector`` はcommand version 3では、 ``false`` と評価されます。"
237
238 msgid "This behavior is valid for only command version 3."
239 msgstr "この挙動はcommand version 3でのみ有効です。"
240
241 msgid "Note that the different behavior until now."
242 msgstr "今までとは挙動が異なることに注意してください。"
243
244 msgid "[:doc:`/reference/normalizers`] Added a new Normalizer ``NormalizerNFKC130`` based on Unicode NFKC (Normalization Form Compatibility Composition) for Unicode 13.0."
245 msgstr "[:doc:`/reference/normalizers`] Unicode 13.0 の NFKC(Normalization Form Compatibility Composition)をベースにしたノーマライザー ``NormalizerNFKC130`` を追加しました。"
246
247 msgid "[:doc:`/reference/token_filters`] Added a new TokenFilter ``TokenFilterNFKC130`` based on Unicode NFKC (Normalization Form Compatibility Composition) for Unicode 13.0."
248 msgstr "[:doc:`/reference/token_filters`] Unicode 13.0 の NFKC(Normalization Form Compatibility Composition)をベースにしたトークンフィルター ``TokenFilterNFKC130`` を追加しました。"
249
250 msgid "[:doc:`/reference/commands/select`] Improved performance for ``\"_score = column - X\"``."
251 msgstr "[:doc:`/reference/commands/select`] ``\"_score = column - X\"`` のパフォーマンスを改善しました。"
252
253 msgid "[:doc:`/reference/commands/reference_acquire`] Improved that ``--reference_acquire`` doesn't get unnecessary reference of index column when we specify the ``--recursive dependent`` option."
254 msgstr "[:doc:`/reference/commands/reference_acquire`] ``--recursive dependent`` オプションを指定した時に必要のないインデックスカラムへの参照を取得しないように改善しました。"
255
256 msgid "From this release, the targets of ``--recursive dependent`` are only the target table's key and the index column that is set to data column."
257 msgstr "今回のリリースから、 ``--recursive dependent`` の対象は、対象のテーブルのキーあるいはデータカラムに設定してあるインデックスカラムです。"
258
259 msgid "[:doc:`/reference/commands/select`] Add support for ordered near phrase search."
260 msgstr "[:doc:`/reference/commands/select`] 順序限定の近傍フレーズ検索をサポートしました。"
261
262 msgid "Until now, the near phrase search have only looked for records that the distance of between specified phrases near."
263 msgstr "今までの近傍フレーズ検索は、指定したフレーズ間の距離が近いレコードのみを探していました。"
264
265 msgid "This feature look for satisfy the following conditions records."
266 msgstr "この機能は、以下の条件を満たすレコードを探します。"
267
268 msgid "If the distance of between specified phrases is near."
269 msgstr "指定したフレーズ間の距離が近い場合。"
270
271 msgid "If the specified phrases are in line with specified order."
272 msgstr "指定したフレーズが指定した順序で並んでいる場合。"
273
274 msgid "This feature use ``*ONP`` as an operator. (Note that the operator isn't ``*NP``.)"
275 msgstr "この機能は、 ``*ONP`` を演算子として使います。(``*NP`` 演算子ではないことに注意してください。)"
276
277 msgid "``$`` is handled as itself in the query syntax. Note that it isn't a special character in the query syntax."
278 msgstr "``$`` はクエリー構文では、 ``$`` そのものとして扱います。クエリー構文では、 ``$`` は特殊文字ではないことに注意してください。"
279
280 msgid "If we use script syntax, this feature use as below."
281 msgstr "スクリプト構文の場合、この機能は以下のように使用します。"
282
283 msgid "If we use query syntax, this feature use as below."
284 msgstr "クエリー構文の場合、この機能は以下のように使用します。"
285
286 msgid "[httpd] Updated bundled nginx to 1.19.5."
287 msgstr "[httpd] バンドルしているnginxのバージョンを1.19.5に更新しました。"
288
289 msgid "[:doc:`/reference/executables/groonga-server-http`] Fixed that Groonga HTTP server finished without waiting all woker threads finished completely."
290 msgstr "[:doc:`/reference/executables/groonga-server-http`] Groonga HTTP server が全てのワーカースレッドの完全な終了を待たずに終了していた問題を修正しました。"
291
292 msgid "Until now, Groonga HTTP server had started the process of finish after worker threads finished itself process. However, worker threads may not finish completely at this timing. Therefore, Groonga HTTP server may crashed according to timing. Because Groonga HTTP server may free area of memory that worker threads are using them yet."
293 msgstr "今まで、Groonga HTTP server は、ワーカースレッドの処理が終了した後から、自身の終了処理を開始していました。しかし、このタイミングでは、ワーカースレッドは完全に終了していないことがあります。そのため、タイミングによってはGroonga HTTP serverがクラッシュすることがあります。Groonga HTTP server がワーカースレッドがまだ使用している領域を解放することがあるためです。"
294
295 msgid "Release 10.0.8 - 2020-10-29"
296 msgstr "10.0.8リリース - 2020-10-29"
297
298 msgid "[:doc:`/reference/commands/select`] Added support for large drilldown keys."
299 msgstr "[:doc:`/reference/commands/select`] 大きいサイズのドリルダウンのキーを使えるようになりました。"
300
301 msgid "The maximum on the key size of Groonga's tables are 4KiB. However, if we specify multiple keys in drilldown, the size of drilldown keys may be larger than 4KiB."
302 msgstr "Groongaのテーブルのキーサイズの最大は4KiBですが、複数のドリルダウンのキーを指定している場合、ドリルダウンのキーのサイズが4KiBを超える場合があります。"
303
304 msgid "For example, if the total size for ``tag`` key and ``n_like`` key is lager than 4KiB in the following case, the drilldown had failed."
305 msgstr "例えば、以下のケースで、 ``tag`` キーと ``n_like`` キーのトータルサイズが4KiB以上だった場合、ドリルダウンは失敗します。"
306
307 msgid "Because the drilldown packs specifying all keys for drilldown. So, if each the size of drilldown key is large, the size of the packed drilldown keys is larger than 4KiB."
308 msgstr "ドリルダウンは指定されている全てのキーを連結しているためです。そのため、ドリルダウンのキーそれぞれが大きい場合は、ドリルダウンのキーを連結したサイズが4KiB以上になります。"
309
310 msgid "This feature requires `xxHash <https://github.com/Cyan4973/xxHash>`_ ."
311 msgstr "この機能には、 `xxHash <https://github.com/Cyan4973/xxHash>`_ が必要です。"
312
313 msgid "However, if we install Groonga from package, we can use this feature without doing anything special. Because Groonga's package already include `xxHash <https://github.com/Cyan4973/xxHash>`_ ."
314 msgstr "ただ、Groongaをパッケージからインストールしている場合は、特に何もしなくてもこの機能を使えます。Groongaのパッケージには、すでに `xxHash <https://github.com/Cyan4973/xxHash>`_ が含まれているためです。"
315
316 msgid "[:doc:`/reference/commands/select`] Added support for handling as the same dynamic column even if columns refer to different tables."
317 msgstr "[:doc:`/reference/commands/select`] 異なるテーブルを参照しているカラムを同じ動的カラムで扱えるようにしました。"
318
319 msgid "We can't have handled the same dynamic column if columns refer to different tables until now. Because the type of columns is different."
320 msgstr "従来、異なるテーブルを参照しているカラムは、同一の動的カラムでは扱えませんでした。カラムの型が異なるためです。"
321
322 msgid "However, from this version, we can handle the same dynamic column even if columns refer to different tables by casting to built-in types as below."
323 msgstr "今回のバージョンから、以下のように異なるテーブルを参照しているカラムであってもビルトインの型にキャストすることで同じ動的カラムで扱うことができます。"
324
325 msgid "We have needed to set ``Store_A`` or ``Store_B`` in the ``type`` of ``customers`` column until now."
326 msgstr "今までは、 ``Store_A`` または ``Store_B`` を ``customers`` カラムの ``type`` に設定する必要がありました。"
327
328 msgid "The type of ``customers_A`` column cast to ``ShortText`` in the above example."
329 msgstr "上記の例では、 ``customers_A`` カラムの型は、 ``ShortText`` にキャストします。"
330
331 msgid "By this, we can also set the value of ``customers_B`` in the value of ``customers`` column. Because both the key of ``customers_A`` and ``customers_B`` are ``ShortText`` type."
332 msgstr "``customers_A`` のキーも ``customers_B`` のキーも ``ShortText`` 型であるため、これで ``customers`` カラムの値に ``customers_B`` の値も設定できます。"
333
334 msgid "[:doc:`/reference/commands/select`] Improved performance when the number of records for search result are huge."
335 msgstr "[:doc:`/reference/commands/select`] 検索結果のレコード数が非常に多い場合のパフォーマンスを改善しました。"
336
337 msgid "This optimization works when below cases."
338 msgstr "この最適化は、以下のケースで効果があります。"
339
340 msgid "``--filter 'column <= \"value\"'`` or ``--filter 'column >= \"value\"'``"
341 msgstr ""
342
343 msgid "``--filter 'column == \"value\"'``"
344 msgstr ""
345
346 msgid "``--filter 'between(...)'`` or ``--filter 'between(_key, ...)'``"
347 msgstr "``--filter 'between(...)'`` または ``--filter 'between(_key, ...)'``"
348
349 msgid "``--filter 'sub_filter(reference_column, ...)'``"
350 msgstr ""
351
352 msgid "Comparing against ``_key`` such as ``--filter '_key > \"value\"'``."
353 msgstr "``--filter '_key > \"value\"'`` のような ``_key`` に対する比較"
354
355 msgid "``--filter 'geo_in_circle(...)'``"
356 msgstr ""
357
358 msgid "Updated bundled LZ4 to 1.9.2 from 1.8.2."
359 msgstr "バンドルしているLZ4を1.8.2から1.9.2に更新しました。"
360
361 msgid "Added support xxHash 0.8"
362 msgstr "xxHash 0.8 をサポートしました。"
363
364 msgid "[httpd] Updated bundled nginx to 1.19.4."
365 msgstr "[httpd] バンドルしているnginxのバージョンを1.19.4に更新しました。"
366
367 msgid "Fixed the following bugs related the browser based administration tool. [GitHub#1139][Reported by sutamin]"
368 msgstr "ブラウザーベースの管理ツール関連の問題を修正しました。 [GitHub#1139][sutaminさんの報告]"
369
370 msgid "The problem that Groonga's logo had not been displayed."
371 msgstr "Groongaのロゴが表示されない問題。"
372
373 msgid "The problem that the throughput chart had not been displayed on the index page for Japanese."
374 msgstr "日本語のインデックスページにスループットグラフが表示されない問題。"
375
376 msgid "[:doc:`/reference/functions/between`] Fixed a bug that ``between(_key, ...)`` is always evaluated by sequential search."
377 msgstr "[:doc:`/reference/functions/between`] ``between(_key, ...)`` が常にシーケンシャルサーチで評価される問題を修正しました。"
378
379 msgid "sutamin"
380 msgstr "sutaminさん"
381
382 msgid "Release 10.0.7 - 2020-09-29"
383 msgstr "10.0.7リリース - 2020-09-29"
384
385 msgid "[highlight], [:doc:`/reference/functions/highlight_full`] Added support for normalizer options."
386 msgstr "[highlight], [:doc:`/reference/functions/highlight_full`] ノーマライザーにオプションを指定できるようになりました。"
387
388 msgid "[:doc:`/reference/command/return_code`] Added a new return code ``GRN_CONNECTION_RESET`` for resetting connection."
389 msgstr "[:doc:`/reference/command/return_code`] 新しいリターンコード ``GRN_CONNECTION_RESET`` を追加しました。"
390
391 msgid "it is returned when an existing connection was forcibly close by the remote host."
392 msgstr "このリターンコードは、リモートホストから強制的に接続を切断されたときに返されます。"
393
394 msgid "Dropped Ubuntu 19.10 (Eoan Ermine)."
395 msgstr "Ubuntu 19.10(Eoan Ermine)のサポートをやめました。"
396
397 msgid "Because this version has been EOL."
398 msgstr "このバージョンはEOLになっているためです。"
399
400 msgid "[httpd] Updated bundled nginx to 1.19.2."
401 msgstr "[httpd] バンドルしているnginxのバージョンを1.19.2に更新しました。"
402
403 msgid "[:doc:`/reference/executables/grndb`] Added support for detecting duplicate keys."
404 msgstr "[:doc:`/reference/executables/grndb`] キーの重複を検出できるようになりました。"
405
406 msgid "``grndb check`` is also able to detect duplicate keys since this release."
407 msgstr "今回のリリースから、 ``grndb check`` でキーの重複も検出できるようになりました。"
408
409 msgid "This check valid except a table of ``TABLE_NO_KEY``."
410 msgstr "このチェックは、 ``TABLE_NO_KEY`` のテーブル以外で有効です。"
411
412 msgid "If the table that was detected duplicate keys by ``grndb check`` has only index columns, we can recover by ``grndb recover``."
413 msgstr "``grndb check`` で重複が検出されたテーブルにインデックスカラムしかない場合は、 ``grndb recover`` で復旧できます。"
414
415 msgid "[:doc:`/reference/commands/table_create`], [:doc:`/reference/commands/column_create`] Added a new option ``--path``"
416 msgstr "[:doc:`/reference/commands/table_create`], [:doc:`/reference/commands/column_create`] 新しいオプション ``--path`` を追加しました。"
417
418 msgid "We can store specified a table or a column to any path using this option."
419 msgstr "このオプションによって指定したテーブルまたは、カラムを任意のパスに格納できます。"
420
421 msgid "This option is useful if we want to store a table or a column that we often use to fast storage (e.g. SSD) and store them that we don't often use to slow storage (e.g. HDD)."
422 msgstr "このオプションは、高速なストレージ(SSDなど)によく使うテーブルやカラムを格納し、低速なストレージ(HDDなど)にあまり使わないテーブルやカラムを格納したいときに有用です。"
423
424 msgid "We can specify both relative path and absolute path in this option."
425 msgstr "このオプションは、相対パス、絶対パスの両方が指定できます。"
426
427 msgid "If we specify relative path in this option, the path is resolved the path of ``groonga`` process as the origin."
428 msgstr "相対パスを指定した場合は、 ``groonga`` プロセスのパスを起点に指定したパスが解決されます。"
429
430 msgid "However, if we specify ``--path``, the result of ``dump`` command includes ``--path`` informations."
431 msgstr "``--path`` を指定した場合、 ``dump`` コマンドの結果に ``--path`` の情報が含まれます。"
432
433 msgid "Therefore, if we specify ``--path``, we can't restore to host in different enviroment."
434 msgstr "したがって、 ``--path`` を指定した場合、 異なる環境のホストではリストアできなくなります。"
435
436 msgid "Because the directory configuration and the location of ``groonga`` process in different by each enviroment."
437 msgstr "これは、ディレクトリ構成や ``groonga`` プロセスの場所が環境ごとに異なるためです。"
438
439 msgid "If we don't want include ``--path`` informations to a dump, we need specify ``--dump_paths no`` in ``dump`` command."
440 msgstr "``--path`` の情報を ``dump`` に含みたくない場合は、 ``dump`` コマンド実行時に ``--dump_paths no`` を指定する必要があります。"
441
442 msgid "[:doc:`/reference/commands/dump`] Added a new option ``--dump_paths``."
443 msgstr "[:doc:`/reference/commands/dump`] 新しいオプション ``--dump_paths`` を追加しました。"
444
445 msgid "``--dump_paths`` option control whether ``--path`` is dumped or not."
446 msgstr "``--dump_paths`` オプションは、 ``--path`` をダンプするかどうかを制御します。"
447
448 msgid "The default value of it is ``yes``."
449 msgstr "デフォルト値は ``yes`` です。"
450
451 msgid "If we specify ``--path`` when we create tables or columns and we don't want include ``--path`` informations to a dump, we specify ``no`` into ``--dump_paths`` when we execute ``dump`` command."
452 msgstr "もし、テーブルやカラム作成時に ``--path`` を指定していて、 ``--path`` の情報を ``dump`` に含みたくない場合は、 ``dump`` コマンド実行時に ``--dump_paths`` に ``no`` を指定してください。"
453
454 msgid "[functions] Added a new function ``string_toknize()``."
455 msgstr "新しい関数 ``string_toknize()`` を追加しました。"
456
457 msgid "It tokenizes the column value that is specified in the second argument with the tokenizer that is specified in the first argument."
458 msgstr "この関数は、第二引数に指定されたカラムの値を、第一引数に指定されたトークナイザーでトークナイズします。"
459
460 msgid "[tokenizers] Added a new tokenizer ``TokenDocumentVectorTFIDF`` (experimental)."
461 msgstr "[tokenizers] 新しいトークナイザー ``TokenDocumentVectorTFIDF`` を追加しました。(実験的) "
462
463 msgid "It generates automatically document vector by TF-IDF."
464 msgstr "このトークナイザーは、TF-IDFで文書ベクトルを自動で生成します。"
465
466 msgid "[tokenizers] Added a new tokenizer ``TokenDocumentVectorBM25`` (experimental)."
467 msgstr "[tokenizers] 新しいトークナイザー ``TokenDocumentVectorBM25`` を追加しました。(実験的) "
468
469 msgid "It generates automatically document vector by BM25."
470 msgstr "このトークナイザーは、BM25で文書ベクトルを自動で生成します。"
471
472 msgid "[:doc:`/reference/commands/select`] Added support for near search in same sentence."
473 msgstr "[:doc:`/reference/commands/select`] 同一センテンス内での、フレーズ近傍検索をサポートしました。"
474
475 msgid "[:doc:`/reference/commands/load`] Fixed a bug that ``load`` didn't a return response when we executed it against 257 columns."
476 msgstr "[:doc:`/reference/commands/load`] 257個のカラムに対して ``load`` を実行すると ``load`` の応答が返らなくなる問題を修正しました。"
477
478 msgid "This bug may occur from 10.0.4 or later."
479 msgstr "この問題は、10.0.4以降で発生する可能性があります。"
480
481 msgid "This bug only occur when we load data by using ``[a, b, c, ...]`` format."
482 msgstr "この問題は、 ``[a, b, c, ...]`` の形式でデータをロードした時にのみ発生します。"
483
484 msgid "If we load data by using ``[{...}]``, this bug doesn't occur."
485 msgstr "``[{...}]`` を使ってデータをロードした場合は発生しません。"
486
487 msgid "[MessagePack] Fixed a bug that float32 value wasn't unpacked correctly."
488 msgstr "[MessagePack] float32の値を正しくアンパックできない問題を修正しました。"
489
490 msgid "Fixed the following bugs related multi column index."
491 msgstr "マルチカラムインデックス関連の問題を修正しました。"
492
493 msgid "``_score`` may be broken with full text search."
494 msgstr "``_score`` の値が壊れることがあります。"
495
496 msgid "The records that couldn't hit might hit."
497 msgstr "ヒットしないはずのレコードがヒットすることがあります。"
498
499 msgid "Please refer to the following URL for the details about occurrence conditioning of this bug."
500 msgstr "この問題の発生条件については、以下のURLを参照してください。"
501
502 msgid "https://groonga.org/en/blog/2020/09/29/groonga-10.0.7.html#multi-column-index"
503 msgstr "https://groonga.org/ja/blog/2020/09/29/groonga-10.0.7.html#multi-column-index"
504
505 msgid "Release 10.0.6 - 2020-08-29"
506 msgstr "10.0.6リリース - 2020-08-29"
507
508 msgid "[:doc:`/reference/commands/logical_range_filter`] Improved search plan for large data."
509 msgstr "[:doc:`/reference/commands/logical_range_filter`] 大きなデータの検索プランを改善しました。"
510
511 msgid "Normally, ``logical_range_filter`` is faster than ``logical_select``. However, it had been slower than ``logical_select`` in the below case."
512 msgstr "通常、 ``logical_range_filter`` は ``logical_select`` より高速ですが、以下のケースでは、 ``logical_select`` より遅くなっていました。"
513
514 msgid "If Groonga can't get the number of required records easily, it has the feature that switches index search from sequential search. (Normally, ``logical_range_filter`` uses a sequential search when records of search target are many.)"
515 msgstr "``logical_range_filter`` には要求されたレコード数をなかなか見つけられない場合にシーケンシャル検索からインデックス検索に切り替える機能があります。( ``logical_range_filter`` は通常、検索対象のレコード数が多い場合は、シーケンシャル検索を使います。)"
516
517 msgid "The search process for it is almost the same as ``logical_select`` if the above switching occurred. So, ``logical_range_filter`` is severalfold slower than ``logical_select`` in the above case if the search target is large data. Because ``logical_range_filter`` executes sort after the search."
518 msgstr "上記の切り替えが発生した場合は、 ``logical_select`` と検索処理がほぼ同じになります。そのため、大きなデータを対象とした検索では、上記のケースで、 ``logical_range_filter`` は、 ``logical_select`` の数倍遅くなります。なぜなら、 ``logical_range_filter`` は検索後にソートを実行するためです。"
519
520 msgid "If we search for large data, Groonga easily use sequential search than until now since this release."
521 msgstr "今回のリリースから、大きなデータを検索する場合に、今までよりシーケンシャル検索が採用されやすくしました。"
522
523 msgid "Therefore, ``logical_range_filter`` will improve performance. Because the case of the search process almost the same as ``logical_select`` decreases."
524 msgstr "これによって、 ``logical_select`` と同等の処理になるケースが減少し ``logical_range_filter`` のパフォーマンスが改善します。"
525
526 msgid "[httpd] Updated bundled nginx to 1.19.1."
527 msgstr "[httpd] バンドルしているnginxのバージョンを1.19.1に更新しました。"
528
529 msgid "Modify how to install into Debian GNU/Linux."
530 msgstr "Debian GNU/Linux へのインストール方法を変更しました。"
531
532 msgid "We modify to use ``groonga-apt-source`` instead of ``groonga-archive-keyring``. Because the ``lintian`` command recommends using ``apt-source`` if a package that it puts files under the ``/etc/apt/sources.lists.d/``."
533 msgstr "``groonga-archive-keyring`` の代わりに ``groonga-apt-source`` を使うように変更しました。 ``lintian`` コマンドが ``/etc/apt/sources.lists.d/`` 配下にファイルを置くパッケージは ``apt-source`` を使うよう推奨しているためです。"
534
535 msgid "The ``lintian`` command is the command which checks for many common packaging errors."
536 msgstr "``lintian`` コマンドはパッケージングに共通のエラーをチェックするためのコマンドです。"
537
538 msgid "Please also refer to the following URL for the details about installation procedures."
539 msgstr "インストール方法についての詳細は、以下のURLも参照してください。"
540
541 msgid "https://groonga.org/docs/install/debian.html"
542 msgstr "https://groonga.org/ja/docs/install/debian.html"
543
544 msgid "[:doc:`/reference/commands/logical_select`] Added a support for ``highlight_html`` and ``highlight_full`` ."
545 msgstr "[:doc:`/reference/commands/logical_select`] ``highlight_html`` と ``highlight_full`` をサポートしました。"
546
547 #
548 msgid "Added support for recycling the IDs of records that are deleted when an array without value space delete.[GitHub#mroonga/mroonga#327][Reported by gaeeyo]"
549 msgstr "値を持たない配列を削除した時、そのレコードのIDを再利用するようにしました。[GitHub#mroonga/mroonga#327][gaeeyoさんの報告]"
550
551 msgid "If an array that doesn't have value space is deleted, deleted IDs are never recycled."
552 msgstr "値を持たない配列を削除した場合、削除されたIDは再利用されません。"
553
554 msgid "Groonga had used large storage space by large ID. Because it uses large storage space by itself."
555 msgstr "Groongaは大きなIDがあることによって、多くのストレージを使用します。大きなIDはそれだけで、多くのストレージを使うためです。"
556
557 msgid "For example, large ID is caused after many adds and deletes like Mroonga's ``mroonga_operations``"
558 msgstr "大きなIDは、例えば、Mroongaの ``mroonga_operations`` のように多くの追加と削除によって発生します。"
559
560 msgid "[:doc:`/reference/commands/select`] Improved performance of full-text-search without index."
561 msgstr "[:doc:`/reference/commands/select`] インデックスを設定していない全文検索のパフォーマンスを改善しました。"
562
563 msgid "[:doc:`/reference/function`] Improved performance for calling of function that all arguments a variable reference or literal."
564 msgstr "[:doc:`/reference/function`] 全ての引数が他のテーブルへの参照か、リテラルである関数のパフォーマンスを改善しました。"
565
566 msgid "[:doc:`/reference/indexing`] Improved performance of offline index construction by using token column. [GitHub#1126][Patched by naoa]"
567 msgstr "[:doc:`/reference/indexing`] トークンカラムを使った静的インデックス構築のパフォーマンスを改善しました。 [GitHub#1126][naoaさんがパッチ提供]"
568
569 msgid "Improved performance for ``\"_score = func(...)\"``."
570 msgstr "``\"_score = func(...)\"`` のパフォーマンスを改善しました。"
571
572 msgid "The performance when the ``_score`` value calculate by using only function like ``\"_score = func(...)\"`` improved."
573 msgstr "``_score`` の値が ``\"_score = func(...)\"`` のように関数によってのみ算出される場合のパフォーマンスを改善しました。"
574
575 msgid "Fixed a bug that garbage may be included in response after response send error."
576 msgstr "応答送信のエラーが発生した後の応答にゴミが含まれることがある問題を修正しました。"
577
578 msgid "It may occur if a client didn't read all responses and closed the connection."
579 msgstr "これは、クライアントが全ての応答を読み込まずにコネクションがクローズされた場合に発生することがあります。"
580
581 msgid "gaeeyo"
582 msgstr "gaeeyoさん"
583
584 msgid "Release 10.0.5 - 2020-07-30"
585 msgstr "10.0.5リリース - 2020-07-30"
586
587 msgid "[:doc:`/reference/commands/select`] Added support for storing reference in table that we specify with ``--load_table``."
588 msgstr "[:doc:`/reference/commands/select`] ``-load_table`` で指定したテーブルに参照を格納できるようにしました。"
589
590 msgid "``--load_table`` is a feature that stores search results to the table in a prepared."
591 msgstr "``--load-table`` は予め用意したテーブルに検索結果を格納する機能です。"
592
593 msgid "If the searches are executed multiple times, we can cache the search results by storing them to this table."
594 msgstr "複数回検索が実行される場合、このテーブルに結果を格納することで、検索結果をキャッシュできます。"
595
596 msgid "We can shorten the search times that the search after the first time by using this table."
597 msgstr "このテーブルを使うことで、初回以降の検索時間を短縮できます。"
598
599 msgid "We can store a reference to other tables into the key of this table as below since this release."
600 msgstr "今回のリリース以降で、以下のようにこのテーブルに別のテーブルへの参照を格納できます。"
601
602 msgid "We can make a smaller size of this table. Because we only store references without store column values."
603 msgstr "カラムの値を格納せず、参照のみを格納するため、このテーブルのサイズを小さくすることができます。"
604
605 msgid "If we search against this table, we can search by using indexes for reference destination."
606 msgstr "このテーブルに対して検索する場合、参照先のテーブルのインデックスを使って検索できます。"
607
608 msgid "[:doc:`/reference/commands/select`] Improved sort performance on below cases."
609 msgstr "[:doc:`/reference/commands/select`] 以下のケースのソートのパフォーマンスを改善しました。"
610
611 msgid "When many sort keys need ID resolution."
612 msgstr "多くのソートキーがID解決をする場合。"
613
614 msgid "For example, the following expression needs ID resolution."
615 msgstr "例えば、以下の式はIDを解決する必要があります。"
616
617 msgid "``--filter true --sort_keys column``"
618 msgstr ""
619
620 msgid "For example, the following expression doesn't need ID resolution. Because the ``_score`` pseudo column exists in the result table not the source table."
621 msgstr "例えば、以下の式はIDを解決する必要がありません。 擬似カラム ``_score`` は、結果テーブルに存在しており、ソーステーブルには存在しないためIDを解決する必要がありません。"
622
623 msgid "``--filter true --sort_keys _score``"
624 msgstr ""
625
626 msgid "When a sort target table has a key."
627 msgstr "ソート対象のテーブルがキーを持っている場合。"
628
629 msgid "Therefore, ``TABLE_NO_KEY`` isn't supported this improvement."
630 msgstr "したがって、 ``TABLE_NO_KEY`` はこの改善をサポートしていません。"
631
632 msgid "[:doc:`/reference/commands/select`] Improved performance a bit on below cases."
633 msgstr "[:doc:`/reference/commands/select`] 以下のケースのパフォーマンスを少し改善しました。"
634
635 msgid "A case of searching for many records matches."
636 msgstr "沢山のレコードがマッチする検索をしているケース。"
637
638 msgid "A case of drilldown for many records."
639 msgstr "沢山のレコードに対してドリルダウンするケース。"
640
641 msgid "[aggregator] Added support for score accessor for target. [GitHub#1120][Patched by naoa]"
642 msgstr "[aggregator] score アクセサーをサポートしました。[GitHub#1120][naoaさんのパッチ提供]"
643
644 msgid "For example, we can ``_score`` subject to ``aggregator_*`` as below."
645 msgstr "例えば、 以下のように ``_score`` を ``aggregator_*`` の対象にできます。"
646
647 msgid "[:doc:`/reference/indexing`] Improved performance of offline index construction on VC++ version."
648 msgstr "[:doc:`/reference/indexing`] VC++版の静的インデックス構築のパフォーマンスを改善しました。"
649
650 msgid "[:doc:`/reference/commands/select`] Use ``null`` instead ``NaN``, ``Infinity``, and ``-Infinity`` when Groonga outputs result for JSON format."
651 msgstr "[:doc:`/reference/commands/select`] JSON形式で出力する際に ``NaN`` や ``Infinity`` 、 ``-Infinity`` の代わりに ``null`` を出力するようにしました。"
652
653 msgid "Because JSON doesn't support them."
654 msgstr "これらの値はJSONではサポートされていないためです。"
655
656 msgid "[:doc:`/reference/commands/select`] Add support fot aggregating standard deviation value."
657 msgstr "[:doc:`/reference/commands/select`] 標準偏差の集計をサポートしました。"
658
659 msgid "For example, we can calculate a standard deviation for every group as below."
660 msgstr "例えば、以下のようにグループごとの標準偏差を計算できます。"
661
662 msgid "We can also calculate sample standard deviation to specifing ``aggregate_sd(target, {\"unbiased\": true})``."
663 msgstr "``aggregate_sd(target, {\"unbiased\": true})`` と指定することで、不偏標準偏差も計算できます。"
664
665 msgid "[Windows] Dropped Visual Studio 2013 support."
666 msgstr "[Windows] Visual Studio 2013のサポートをやめました。"
667
668 msgid "[:doc:`/reference/executables/groonga-server-http`] Fixed a bug that a request can't halt even if we execute ``shutdown?mode=immediate`` when the response was halted by error occurrence."
669 msgstr "[:doc:`/reference/executables/groonga-server-http`] 応答がエラーで中断された時に、 ``shutdown?immediate`` を実行しても、リクエストが中断しない問題を修正しました。"
670
671 msgid "Fixed a crash bug when an error occurs while a request."
672 msgstr "リクエスト中にエラーが発生した時にクラッシュする問題を修正しました。"
673
674 msgid "It only occurs when we use Apache Arrow Format."
675 msgstr "これは、Apache Arrow形式を使っている時にのみ発生します。"
676
677 msgid "Groonga crashes when we send request to Groonga again after the previous request was halted by error occurrence."
678 msgstr "前のリクエストがエラーによって中断された後に再度Groongaへリクエストを送信した時にGroongaがクラッシュします。"
679
680 msgid "[:doc:`/reference/functions/between`] Fixed a crash bug when temporary table is used."
681 msgstr "[:doc:`/reference/functions/between`] 一時テーブルを使用した時にクラッシュする問題を修正しました。"
682
683 msgid "For example, if we specify a dynamic column in the first argument for ``between``, Groonga had crashed."
684 msgstr "例えば、 ``between`` の第一引数に動的カラムを指定すると、Groongaがクラッシュしていました。"
685
686 msgid "Fixed a bug that procedure created by plugin is freed unexpectedly."
687 msgstr "プラグインで作成したプロシージャーが予期せず解放される問題を修正しました。"
688
689 msgid "It's only occurred in reference count mode."
690 msgstr "参照カウントモードでのみ発生します。"
691
692 msgid "It's not occurred if we don't use ``plugin_register``."
693 msgstr "``plugin_register`` を使っていない場合は、発生しません。"
694
695 msgid "It's not occurred in the process that executes ``plugin_register``."
696 msgstr "``plugin_register`` を実行したプロセスでは発生しません。"
697
698 msgid "It's occurred in the process that doesn't execute ``plugin_register``."
699 msgstr "``plugin_register`` を実行していないプロセスで発生します。"
700
701 msgid "Fixed a bug that normalization error occurred while static index construction by ``token_column``. [GitHub#1122][Reported by naoa]"
702 msgstr "``token_column`` を使った静的インデックス構築中に正規化エラーが発生する問題を修正しました。[GitHub#1122][naoaさんの報告]"
703
704 msgid "Release 10.0.4 - 2020-06-29"
705 msgstr "10.0.4リリース - 2020-06-29"
706
707 msgid "[:doc:`/reference/tables`] Added support for registering 400M records into a hash table."
708 msgstr "[:doc:`/reference/tables`] ハッシュテーブルで4億件のレコードの登録をサポートしました。"
709
710 msgid "[:doc:`/reference/commands/select`] Improve scorer performance when the ``_score`` doesn't get recursively values."
711 msgstr "[:doc:`/reference/commands/select`] ``_score`` が再帰的に値を取得しない時のパフォーマンスを改善しました。"
712
713 msgid "Groonga get recursively value of ``_score`` when search result is search target."
714 msgstr "Groongaは、検索結果が検索対象の時に、 ``_score`` の値を再帰的に取得します。"
715
716 msgid "For example, the search targets of ``slices`` are search result. Therefore, if we use ``slice`` in a query, this improvement doesn't ineffective."
717 msgstr "例えば、 ``slices`` は検索結果が検索対象です。したがって、 ``slices`` を使っているクエリーでは、この改善は効果がありません。"
718
719 msgid "[:doc:`/reference/log`] Improved that we output drilldown keys in query-log."
720 msgstr "[:doc:`/reference/log`] ドリルダウンのキーをクエリーログに出力するようにしました。"
721
722 msgid "[:doc:`/reference/commands/reference_acquire`], [:doc:`/reference/commands/reference_release`] Added new commands for reference count mode."
723 msgstr "[:doc:`/reference/commands/reference_acquire`], [:doc:`/reference/commands/reference_release`] 参照カウントモード用に新しいコマンドを追加しました。"
724
725 msgid "If we need to call multiple ``load`` in a short time, auto close by the reference count mode will degrade performance."
726 msgstr "短い間隔で複数の ``load`` を呼び出す必要がある場合、参照カウントモードによる自動クローズによってパフォーマンスが低下します。"
727
728 msgid "We can avoid the performance degrading by calling ``/reference_acquire`` before multiple ``load`` and calling ``/reference_release`` after multiple ``load``. Between ``/reference_acquire`` and ``/reference_release``, auto close is disabled."
729 msgstr "複数の ``load`` の前に ``/reference_acquire`` を呼び、 複数の ``load`` の後に ``/reference_release`` を呼ぶことで、このパフォーマンスの低下を避けることができます。``/reference_acquire`` と ``/reference_release`` の間は自動クローズは無効になります。"
730
731 msgid "Because ``/reference_acquire`` acquires a reference of target objects."
732 msgstr "``/reference_acquire`` が、対象のオブジェクトの参照を取得するためです。"
733
734 msgid "We can must call ``/reference_release`` after you finish performance impact operations."
735 msgstr "パフォーマンスに影響のある操作が完了したら、 ``/reference_release`` を呼ぶ必要があります。"
736
737 msgid "If we don't call ``/reference_release``, the reference count mode doesn't work."
738 msgstr "``/reference_release`` を呼ばない場合、参照カウントモードは機能しません。"
739
740 msgid "[:doc:`/reference/commands/select`] Added support for aggregating multiple groups on one time ``drilldown``."
741 msgstr "[:doc:`/reference/commands/select`] 一度の ``drilldown`` で複数グループの集計をサポートしました。"
742
743 msgid "We came to be able to calculate sum or arithmetic mean every different multiple groups on one time ``drilldown`` as below."
744 msgstr "以下のように、一回の ``drilldown`` で異なるグループ毎に和と算術平均を計算できるようになりました。"
745
746 msgid "[:doc:`/reference/executables/groonga`] Added support for ``--pid-path`` in standalone mode."
747 msgstr "[:doc:`/reference/executables/groonga`] スタンドアローンモードで、 ``--pid-path`` をサポートしました。"
748
749 msgid "Because ``--pid-path`` had been ignored in standalone mode in before version."
750 msgstr "以前のバージョンのスタンドアローンモードでは、 ``--pid-path`` は無視されていました。"
751
752 msgid "[:doc:`/reference/commands/io_flush`] Added support for reference count mode."
753 msgstr "[:doc:`/reference/commands/io_flush`] 参照カウントモードに対応しました。"
754
755 msgid "[:doc:`/reference/commands/logical_range_filter`], [:doc:`/reference/commands/logical_count`] Added support for reference count mode."
756 msgstr "[:doc:`/reference/commands/logical_range_filter`],[:doc:`/reference/commands/logical_count`] 参照カウントモードに対応しました。"
757
758 msgid "[:doc:`/reference/executables/groonga-server-http`] We didn't add header after the last chunk."
759 msgstr "[:doc:`/reference/executables/groonga-server-http`] 最後のチャンクの後にヘッダーをつけないようにしました。"
760
761 msgid "Because there is a possibility to exist that the HTTP client ignores header after the last chunk."
762 msgstr "最後のチャンクの後のヘッダーを無視するHTTPクライアントが存在する可能性があるためです。"
763
764 msgid "[vector_slice] Added support for a vector that has the value of the ``Float32`` type. [GitHub#1112 patched by naoa]"
765 msgstr "[vector_slice] ``Float32`` 型のベクターをサポートしました。 [GitHub#1106 naoaさんがパッチ提供]"
766
767 msgid "Added support for parallel offline index construction using token column."
768 msgstr "トークンカラムを使った、並列静的インデックス構築をサポートしました。"
769
770 msgid "We came to be able to construct an offline index on parallel threads from data that are tokenized in advance."
771 msgstr "予めトークナイズされたデータから複数スレッドで静的インデックスの構築ができるようになりました。"
772
773 msgid "We can tune parameters of parallel offline construction by the following environment variables"
774 msgstr "以下の環境変数で、並列静的インデックス構築のパラメータを調整できます。"
775
776 msgid "``GRN_TOKEN_COLUMN_PARALLEL_CHUNK_SIZE`` : We specify how many records are processed per thread."
777 msgstr "``GRN_TOKEN_COLUMN_PARALLEL_CHUNK_SIZE`` : スレッド毎にどのくらいのレコードを処理するかを指定します。"
778
779 msgid "The default value is ``1024`` records."
780 msgstr "デフォルト値は ``1024`` レコードです。"
781
782 msgid "``GRN_TOKEN_COLUMN_PARALLEL_TABLE_SIZE_THRESHOLD`` : We specify how many source records are required for parallel offline construction."
783 msgstr "``GRN_TOKEN_COLUMN_PARALLEL_TABLE_SIZE_THRESHOLD`` : どのくらいのソースレコードで並列化するかを指定します。"
784
785 msgid "The default value is ``102400`` records."
786 msgstr "デフォルト値は ``102400`` レコードです。"
787
788 msgid "[:doc:`/reference/commands/select`] Improved performance for ``load_table`` on the reference count mode."
789 msgstr "[:doc:`/reference/commands/select`] 参照カウントモード時の ``load_table`` のパフォーマンスを改善しました。"
790
791 msgid "Fixed a bug that the database of Groonga was broken when we search by using the dynamic columns that don't specify a ``--filter`` and stridden over shard."
792 msgstr "シャードをまたいでいて、かつ ``--filter`` を指定していない動的カラムを使って検索すると、Gronngaのデータベースが破損する問題を修正しました。"
793
794 msgid "Fixed a bug that ``Float32`` type had not displayed on a result of ``schema`` command."
795 msgstr "``schema`` コマンドの結果に ``Float32`` 型が表示されなかった問題を修正しました。"
796
797 msgid "Fixed a bug that we count in surplus to ``_nsubrecs`` when the reference ``uvector`` hasn't element."
798 msgstr "参照 ``uvector`` が要素を持っていないとき、 ``_nsubrecs`` を余分にカウントする問題を修正しました。"
799
800 msgid "Release 10.0.3 - 2020-05-29"
801 msgstr "10.0.3リリース - 2020-05-29"
802
803 msgid "We came to be able to construct an inverted index from data that are tokenized in advance."
804 msgstr "予めトークナイズされたデータから転置インデックスを構築できるようになりました。"
805
806 msgid "The construct of an index is speeded up from this."
807 msgstr "これにより、インデックスの構築が高速化します。"
808
809 msgid "We need to prepare token column to use this improvement."
810 msgstr "この改善を使うには、トークンカラムを準備する必要があります。"
811
812 msgid "token column is an auto generated value column like an index column."
813 msgstr "トークンカラムは、インデックスカラムのように自動で値が生成されます。"
814
815 msgid "token column value is generated from source column value by tokenizing the source column value."
816 msgstr "トークンカラムの値はソースカラムの値をトークナイズすることで生成されます。"
817
818 msgid "We can create a token column by setting the source column as below."
819 msgstr "トークンカラムは以下のようにソースカラムを設定することで作成できます。"
820
821 msgid "[:doc:`/reference/commands/select`] We came to be able to specify a ``vector`` for the argument of a function."
822 msgstr "[:doc:`/reference/commands/select`] 関数の引数に ``vector`` を指定できるようになりました。"
823
824 msgid "For example, ``flags`` options of ``query`` can describe by a ``vector`` as below."
825 msgstr "例えば、 ``query`` の ``flags`` オプションを ``vector`` を使って以下のように記述できます。"
826
827 msgid "[:doc:`/reference/commands/select`] Added a new stage ``result_set`` for dynamic columns."
828 msgstr "[:doc:`/reference/commands/select`] 動的カラムに新しいステージ ``result_set`` を追加しました。"
829
830 msgid "This stage generates a column into a result set table. Therefore, it is not generated if ``query`` or ``filter`` doesn't exist"
831 msgstr "このステージは、結果セットのテーブルにカラムを作ります。したがって、 ``query`` か ``filter`` が存在しない場合は作られません。"
832
833 msgid "Because if ``query`` or ``filter`` doesn't exist, Groonga doesn't make a result set table."
834 msgstr "``query`` や ``filter`` が存在しない場合は、結果セットのテーブルが作られないためです。"
835
836 msgid "We can't use ``_value`` for the stage. The ``result_set`` stage is for storing value by ``score_column``."
837 msgstr "このステージでは ``_value`` は使用できません。 ``result_set`` ステージの値は ``score_column`` に格納されます。"
838
839 msgid "[vector_slice] Added support for weight vector that has weight of ``Float32`` type. [GitHub#1106 patched by naoa]"
840 msgstr "[vector_slice] 重み付きベクターの重みに ``Float32`` 型が使えるようになりました。 [GitHub#1106 naoaさんがパッチ提供]"
841
842 msgid "[:doc:`/reference/commands/select`] Added support for ``filtered`` stage and ``output`` stage of dynamic columns on drilldowns. [GitHub#1101 patched by naoa][GitHub#1100 patched by naoa]"
843 msgstr "[:doc:`/reference/commands/select`] drilldownsの動的カラムのステージに ``filtered`` と ``output`` を追加しました。 [GitHub#1101 naoaさんがパッチ提供][GitHub#1100 naoaさんがパッチ提供]"
844
845 msgid "We can use ``filtered`` and ``output`` stage of dynamic columns on drilldowns as with ``drilldowns[Label].stage filtered`` and ``drilldowns[Label].stage output``."
846 msgstr "``drilldowns[Label].stage filtered`` や ``drilldowns[Label].stage output`` のように drilldowns の動的カラムのステージに ``filtered`` と ``output`` を使えます。"
847
848 msgid "[:doc:`/reference/commands/select`] Added support for ``Float`` type value in aggregating on drilldown."
849 msgstr "[:doc:`/reference/commands/select`] ドリルダウンでの集計に ``Float`` 型の値をサポートしました。"
850
851 msgid "We can aggregate max value, min value, and sum value for ``Float`` type value using ``MAX``, ``MIN``, and ``SUM``."
852 msgstr "``MAX``、``MIN``、``SUM`` を使って ``Float`` 型の値の最大値、最小値、合計値を集計できます。"
853
854 msgid "[:doc:`/reference/functions/query`] [:doc:`/reference/functions/geo_in_rectangle`] [:doc:`/reference/functions/geo_in_circle`] Added a new option ``score_column`` for ``query()``, ``geo_in_rectangle()``, and ``geo_in_circle()``."
855 msgstr "[:doc:`/reference/functions/query`] [:doc:`/reference/functions/geo_in_rectangle`] [:doc:`/reference/functions/geo_in_circle`] ``query()`` と ``geo_in_rectangle()`` と ``geo_in_circle()`` に新しいオプション ``score_column`` を追加しました。"
856
857 msgid "We can store a score value by condition using ``score_column``."
858 msgstr "``score_column`` を使うことで条件毎にスコアの値を格納できます。"
859
860 msgid "Normally, Groonga calculate a score by adding scores of all conditions. However, we sometimes want to get a score value by condition."
861 msgstr "通常、Groongaは、全ての条件のスコアーを加算してスコアーを計算しますが、条件毎にスコアーの値を取得したいこともあります。"
862
863 msgid "For example, if we want to only use how near central coordinate as score as below, we use ``score_column``."
864 msgstr "例えば以下のように、中心座標にどれだけ近いかをスコアーとして使いたい場合に ``score_column`` が使えます。"
865
866 msgid "The sort by ``_score`` is meaningless in the above example. Because the value of ``_score`` is all ``1`` by ``category == \"Tower\"``. However, we can sort distance from central coordinate using ``score_column``."
867 msgstr "上記の例では、 ``_score`` によるソートは意味をなしません。 ``category == \"Tower\"`` によって、 ``_score`` の値は全て ``1`` になるためです。しかし、 ``socre_column`` を使うことで、中心座標からの距離でソートできます。"
868
869 msgid "[Windows] Groonga came to be able to output backtrace when it occurs error even if it doesn't crash."
870 msgstr "[Windows] クラッシュしていないくてもエラー時にはバックトレースが出力されるようになりました。"
871
872 msgid "[Windows] Dropped support for old Windows."
873 msgstr "[Windows] 古いWindowsのサポートをやめました。"
874
875 msgid "Groonga for Windows come to require Windows 8 (Windows Server 2012) or later from 10.0.3."
876 msgstr "10.0.3から、Windows 8 (Windows Server 2012) 以降を要求します。"
877
878 msgid "[:doc:`/reference/commands/select`] Improved sort performance when sort keys were mixed referable sort keys and the other sort keys."
879 msgstr "[:doc:`/reference/commands/select`] 参照可能なソートキーとそうでないソートキーが混在しているときのソートパフォーマンスを改善しました。"
880
881 msgid "We improved sort performance if mixed referable sort keys and the other and there are referable keys two or more."
882 msgstr "参照可能なソートキーとそうでないソートキーが混在していて、参照可能なキーが2つ以上あるときのソートパフォーマンスを改善しました。"
883
884 msgid "Referable sort keys are sort keys that except below them."
885 msgstr "参照可能なソートキーとは以下のソートキー以外のことです。"
886
887 msgid "Compressed columns"
888 msgstr "圧縮されたカラム"
889
890 msgid "``_value`` against the result of drilldown that is specified multiple values to the key of drilldown."
891 msgstr "ドリルダウンのキーに複数の値が指定されているドリルダウンの値を格納する ``_value``"
892
893 msgid "``_key`` against patricia trie table that has not the key of ``ShortText`` type."
894 msgstr "``ShortText`` 型のキーを持たないパトリシアトライテーブルの ``_key``"
895
896 msgid "``_score``"
897 msgstr ""
898
899 msgid "The more sort keys that except string, a decrease in the usage of memory for sort."
900 msgstr "文字列以外のソートキーが多いほど、ソートに使用するメモリ使用量が少なくなります。"
901
902 msgid "[:doc:`/reference/commands/select`] Improved sort performance when sort keys are all referable keys case."
903 msgstr "[:doc:`/reference/commands/select`] 全てのソートキーが参照可能なキーの時のソートのパフォーマンスを改善しました。"
904
905 msgid "[:doc:`/reference/commands/select`] Improve scorer performance as a ``_socre = column1*X + column2*Y + ...`` case."
906 msgstr "[:doc:`/reference/commands/select`] ``_socre = column1*X + column2*Y + ...`` の場合のスコアラーのパフォーマンスを改善しました。"
907
908 msgid "This optimization effective when there are many ``+`` or ``*`` in ``_score``."
909 msgstr "この最適化は、 ``_score`` 内に多くの ``+`` または ``*`` がある場合に効きます。"
910
911 msgid "At the moment, it has only effective against ``+`` and ``*``."
912 msgstr "現状、 ``+`` と ``*`` に対してのみ効果があります。"
913
914 msgid "[:doc:`/reference/commands/select`] Added support for phrase near search."
915 msgstr "[:doc:`/reference/commands/select`] フレーズ近傍検索をサポートしました。"
916
917 msgid "We can search phrase by phrase by a near search."
918 msgstr "フレーズ単位で近傍検索できます。"
919
920 msgid "Query syntax for near phrase search is ``*NP\"Phrase1 phrase2 ...\"``."
921 msgstr "フレーズ近傍検索のクエリー構文は、 ``*NP\"Phrase1 phrase2 ...\"`` です。"
922
923 msgid "Script syntax for near phrase search is ``column *NP \"phrase1 phrase2 ...\"``."
924 msgstr "フレーズ近傍検索のスクリプト構文は、 ``column *NP \"phrase1 phrase2 ...\"`` です。"
925
926 msgid "If the search target phrase includes space, we can search for it by surrounding it with ``\"`` as below."
927 msgstr "検索対象のフレーズにスペースを含む場合、 以下のようにフレーズを ``\"`` で囲うことで検索できます。"
928
929 msgid "[:doc:`/reference/columns/vector`] Added support for ``float32`` weight vector."
930 msgstr "[:doc:`/reference/columns/vector`] 重み付きベクターの重みに ``float32`` 型を追加しました。"
931
932 msgid "We can store weight as ``float32`` instead of ``uint32``."
933 msgstr "``uint32`` の代わりに ``float32`` として重みを格納できます。"
934
935 msgid "We need to add ``WEIGHT_FLOAT32`` flag when execute ``column_create`` to use this feature."
936 msgstr "この機能を使うには、 ``column_create`` 実行時に ``WEIGHT_FLOAT32`` フラグを追加する必要があります。"
937
938 msgid "However, ``WEIGHT_FLOAT32`` flag isn't available with ``COLUMN_INDEX`` flag for now."
939 msgstr "今の所、 ``WEIGHT_FLOAT32`` フラグは、 ``COLUMN_INDEX`` フラグと併用できません。"
940
941 msgid "Added following APIs"
942 msgstr "以下のAPIを公開しました。"
943
944 msgid "Added ``grn_obj_is_xxx`` functions. For more information as below."
945 msgstr "``grn_obj_is_xxx`` 関数を追加しました。詳細は以下の通りです。"
946
947 msgid "``grn_obj_is_weight_vector(grn_ctx *ctx, grn_obj *obj)``"
948 msgstr ""
949
950 msgid "It returns as a ``bool`` whether the object is a weight vector."
951 msgstr "重み付きベクターかどうかを ``bool`` として返します。"
952
953 msgid "``grn_obj_is_uvector(grn_ctx *ctx, grn_obj *obj)``"
954 msgstr ""
955
956 msgid "It returns as a ``bool`` whether the object is a ``uvector``."
957 msgstr "``uvector`` かどうかを ``bool`` として返します。"
958
959 msgid "``uvector`` is a ``vector`` that size of elements for ``vector`` are fixed."
960 msgstr "``uvector`` とは、要素のサイズが固定の ``vector`` です。"
961
962 msgid "``grn_obj_is_weight_uvector(grn_ctx *ctx, grn_obj *obj)``"
963 msgstr ""
964
965 msgid "It returns as a ``bool`` whether the object is a weight uvector."
966 msgstr "重み付きuvectorかどうかを ``bool`` として返します。"
967
968 msgid "Added ``grn_type_id_size(grn_ctx *ctx, grn_id id)``."
969 msgstr "``grn_type_id_size(grn_ctx *ctx, grn_id id)`` を追加しました。"
970
971 msgid "It returns the size of Groonga data type as a ``size_t``."
972 msgstr "Groongaのデータ型のサイズを ``size_t`` として返します。"
973
974 msgid "Added ``grn_selector_data_get_xxx`` functions. For more information as below."
975 msgstr "``grn_selector_data_get_xxx`` を追加しました。詳細は以下の通りです。"
976
977 msgid "These functions return selector related data."
978 msgstr "これらの関数はセレクター関連のデータを返します。"
979
980 msgid "These functions are supposed to call in selector. If they are called except in selector, they return ``NULL``."
981 msgstr "これらの関数はセレクターの中で呼び出すことを想定しています。セレクター以外の場所で呼び出された場合は、 ``NULL`` を返します。"
982
983 msgid "``grn_selector_data_get(grn_ctx *ctx)``"
984 msgstr ""
985
986 msgid "It returns all information that relating calling selector as ``grn_selector_data *`` structure."
987 msgstr "セレクター呼び出しに関する全ての情報を ``grn_selector_data *`` 構造体として返します。"
988
989 msgid "``grn_selector_data_get_selector(grn_ctx *ctx, grn_selector_data *data)``"
990 msgstr ""
991
992 msgid "It returns selector itself as ``grn_obj *``."
993 msgstr "セレクター自身を ``grn_obj *`` として返します。"
994
995 msgid "``grn_selector_data_get_expr(grn_ctx *ctx, grn_selector_data *data)``"
996 msgstr ""
997
998 msgid "It returns selector is used ``--filter`` condition and ``--query`` condition as ``grn_obj *``."
999 msgstr "セレクターに使用されている、 ``--filter`` 条件や ``--query`` 条件を ``grn_obj *`` として返します。"
1000
1001 msgid "``grn_selector_data_get_table(grn_ctx *ctx, grn_selector_data *data)``"
1002 msgstr ""
1003
1004 msgid "It returns target table as ``grn_obj *``"
1005 msgstr "検索対象のテーブルを ``grn_obj *`` として返します。"
1006
1007 msgid "``grn_selector_data_get_index(grn_ctx *ctx, grn_selector_data *data)``"
1008 msgstr ""
1009
1010 msgid "It returns index is used by selector as ``grn_obj *``."
1011 msgstr "セレクターに使われているインデックスを ``grn_obj *`` として返します。"
1012
1013 msgid "``grn_selector_data_get_args(grn_ctx *ctx, grn_selector_data *data, size_t *n_args)``"
1014 msgstr ""
1015
1016 msgid "It returns arguments of function that called selector as ``grn_obj **``."
1017 msgstr "セレクターが呼び出した関数の引数を ``grn_obj *`` として返します。"
1018
1019 msgid "``grn_selector_data_get_result_set(grn_ctx *ctx, grn_selector_data *data)``"
1020 msgstr ""
1021
1022 msgid "It returns result table as ``grn_obj *``."
1023 msgstr "結果テーブルを ``grn_obj *`` として返します。"
1024
1025 msgid "``grn_selector_data_get_op(grn_ctx *ctx, grn_selector_data *data)``"
1026 msgstr ""
1027
1028 msgid "It returns how to perform the set operation on existing result set as ``grn_operator``."
1029 msgstr "既存の結果セットに対してどう集合演算したかを ``grn_operator`` として返します。"
1030
1031 msgid "Added ``grn_plugin_proc_xxx`` functions. For more information as below."
1032 msgstr "``grn_plugin_proc_xxx`` 関数を追加しました。詳細は以下の通りです。"
1033
1034 msgid "``grn_plugin_proc_get_value_operator(grn_ctx *ctx, grn_obj *value, grn_operator default_operator, const char *context)``"
1035 msgstr ""
1036
1037 msgid "It returns the operator of a query as a ``grn_operator``."
1038 msgstr "クエリーオペレーターを ``grn_operator`` として返します。"
1039
1040 msgid "For example, ``&&`` is returned as a ``GRN_OP_AND``."
1041 msgstr "例えば、 ``&&`` は ``GRN_OP_ANDP`` として返されます。"
1042
1043 msgid "``grn_plugin_proc_get_value_bool(grn_ctx *ctx, grn_obj *value, bool default_value, const char *tag)``"
1044 msgstr ""
1045
1046 msgid "It returns the value that is specified ``true`` or ``false`` like ``with_transposition`` argument of the below function as a ``bool`` (``bool`` is the data type of C language)."
1047 msgstr "以下の関数の引数 ``with_transposition`` のように ``true`` または ``false`` が指定される値を ``bool`` として返します。( ``bool`` はC言語のデータ型です。)"
1048
1049 msgid "Added ``grn_proc_options_xxx`` functions. For more information as below."
1050 msgstr "``grn_proc_options_xxx`` 関数を追加しました。詳細は以下の通りです。"
1051
1052 msgid "``query()`` only uses them for now."
1053 msgstr "これらは、 ``query()`` でのみ使えます。"
1054
1055 msgid "``grn_proc_options_parsev(grn_ctx *ctx, grn_obj *options, const char *tag, const char *name, va_list args)``"
1056 msgstr "``grn_proc_options_parsev(grn_ctx *ctx, grn_obj *options, const char *tag, const char *name, va_list args)`` を追加しました。"
1057
1058 msgid "This function execute parse options."
1059 msgstr "オプションのパースを実行します。"
1060
1061 msgid "We had to implement parsing to options ourselves until now, however, we can parse them by just call this function from this version."
1062 msgstr "今までは、オプションのパースを自分で実装しなければなりませんでしたが、この関数を呼び出すだけでオプションをパースできます。"
1063
1064 msgid "``grn_proc_options_parse(grn_ctx *ctx, grn_obj *options, const char *tag, const char *name, ...)``"
1065 msgstr ""
1066
1067 msgid "It calls ``grn_proc_options_parsev()``. Therefore, features of this function same ``grn_proc_options_parsev()``."
1068 msgstr "``grn_proc_option_parsev()`` を呼び出します。したがって、この関数の機能は、 ``grn_proc_options_parsev()`` と同じです。"
1069
1070 msgid "It only differs in the interface compare with ``grn_proc_options_parsev()``."
1071 msgstr "``grn_proc_options_parsev()`` とは、インターフェースだけが異なります。"
1072
1073 msgid "Added ``grn_text_printfv(grn_ctx *ctx, grn_obj *bulk, const char *format, va_list args)``"
1074 msgstr "``grn_text_printfv(grn_ctx *ctx, grn_obj *bulk, const char *format, va_list args)`` を追加しました。"
1075
1076 msgid "``grn_text_vprintf`` is deprecated from 10.0.3. We use ``grn_text_printfv`` instead."
1077 msgstr "``grn_text_vprintf`` は10.0.3から非推奨になりました。 代わりに ``grn_text_printfv`` を使ってください。"
1078
1079 msgid "Added ``grn_type_id_is_float_family(grn_ctx *ctx, grn_id id)``."
1080 msgstr "``grn_type_id_is_float_family(grn_ctx *ctx, grn_id id)`` を追加しました。"
1081
1082 msgid "It returns whether ``grn_type_id`` is ``GRN_DB_FLOAT32`` or ``GRN_DB_FLOAT`` or not as a ``bool``."
1083 msgstr "``grn_type_id`` が ``GRN_DB_FLOAT32`` または ``GRN_DB_FLOAT`` かどうかを ``bool`` として返します。"
1084
1085 msgid "Added ``grn_dat_cursor_get_max_n_records(grn_ctx *ctx, grn_dat_cursor *c)``."
1086 msgstr "``grn_dat_cursor_get_max_n_records(grn_ctx *ctx, grn_dat_cursor *c)`` を追加しました。"
1087
1088 msgid "It returns the number of max records the cursor can have as a ``size_t``. (This API is for the DAT table)"
1089 msgstr "カーソルが保持できるレコード数の最大値を ``size_t`` として返します。(このAPIはDATテーブル用です。)"
1090
1091 msgid "Added ``grn_table_cursor_get_max_n_records(grn_ctx *ctx, grn_table_cursor *cursor)``."
1092 msgstr "``grn_table_cursor_get_max_n_records(grn_ctx *ctx, grn_table_cursor *cursor)`` を追加しました。"
1093
1094 msgid "It returns the number of max records the cursor can have as a ``size_t``."
1095 msgstr "カーソルが保持できるレコード数の最大値を返します。"
1096
1097 msgid "It can use against all table type (``TABLE_NO_KEY``, ``TABLE_HASH_KEY``, ``TABLE_DAT_KEY``, and ``TABLE_PAT_KEY``)."
1098 msgstr "全ての種類(``TABLE_NO_KEY``, ``TABLE_HASH_KEY``, ``TABLE_DAT_KEY``, ``TABLE_PAT_KEY``)のテーブルで使えます。"
1099
1100 msgid "Added ``grn_result_set_add_xxx`` functions. For more information as below."
1101 msgstr "``grn_result_set_add_xxx`` を追加しました。詳細は以下の通りです。"
1102
1103 msgid "``grn_result_set_add_record(grn_ctx *ctx, grn_hash *result_set, grn_posting *posting, grn_operator op)``"
1104 msgstr ""
1105
1106 msgid "It adds a record into the table of result sets."
1107 msgstr "結果セットのテーブルにレコードを追加します。"
1108
1109 msgid "``grn_ii_posting_add_float`` is deprecated from 10.0.3. We use ``grn_rset_add_records()`` instead."
1110 msgstr "``grn_ii_posting_add_float`` は10.0.3から非推奨になりました。代わりに ``grn_rset_add_records()`` を使ってください。"
1111
1112 msgid "``grn_result_set_add_table(grn_ctx *ctx, grn_hash *result_set, grn_obj *table, double score, grn_operator op)``"
1113 msgstr ""
1114
1115 msgid "It adds a table into the result sets."
1116 msgstr "結果セットにテーブルを追加します。"
1117
1118 msgid "``grn_result_set_add_table_cursor(grn_ctx *ctx, grn_hash *result_set, grn_table_cursor *cursor, double score, grn_operator op)``"
1119 msgstr ""
1120
1121 msgid "It adds records that a table cursor has into the result sets."
1122 msgstr "結果セットにカーソル内のレコードを追加します。"
1123
1124 msgid "Added ``grn_vector_copy(grn_ctx *ctx, grn_obj *src, grn_obj *dest)``."
1125 msgstr "``grn_vector_copy(grn_ctx *ctx, grn_obj *src, grn_obj *dest)`` を追加しました。"
1126
1127 msgid "It copies a ``vector`` object. It returns whether success copy a ``vector`` object."
1128 msgstr "``vector`` オブジェトをコピーします。 ``vector`` オブジェクトのコピーに成功したかどうかを返します。"
1129
1130 msgid "Added ``grn_obj_have_source(grn_ctx *ctx, grn_obj *obj)``."
1131 msgstr "``grn_obj_have_source(grn_ctx *ctx, grn_obj *obj)`` を追加しました。"
1132
1133 msgid "It returns whether the column has a source column as a ``bool``."
1134 msgstr "ソースカラムを持つカラムかどうかを ``bool`` として返します。"
1135
1136 msgid "Added ``grn_obj_is_token_column(grn_ctx *ctx, grn_obj *obj)``."
1137 msgstr "``grn_obj_is_token_column(grn_ctx *ctx, grn_obj *obj)`` を追加しました。"
1138
1139 msgid "It returns whether the column is a token column as a ``bool``."
1140 msgstr "トークンカラムかどうかを ``bool`` として返します。"
1141
1142 msgid "Added ``grn_hash_add_table_cursor(grn_ctx *ctx, grn_hash *hash, grn_table_cursor *cursor, double score)``."
1143 msgstr "``grn_hash_add_table_cursor(grn_ctx *ctx, grn_hash *hash, grn_table_cursor *cursor, double score)`` を追加しました。"
1144
1145 msgid "It's for bulk result set insert. It's faster than inserting records by ``grn_ii_posting_add()``."
1146 msgstr "結果セットを一括して挿入するための関数です。 ``grn_ii_posting_add()`` を使ってレコードを挿入するより高速です。"
1147
1148 msgid "Fixed a crash bug if the modules (tokenizers, normalizers, and token filters) are used at the same time from multiple threads."
1149 msgstr "複数のスレッドから、同時にモジュール(トークナイザー、ノーマライザー、トークンフィルター)が使われた場合にクラッシュする問題を修正しました。"
1150
1151 msgid "Fixed precision of ``Float32`` value when it outputted."
1152 msgstr "``Float32`` の値を表示する際の精度を修正しました。"
1153
1154 msgid "The precision of it changes to 8-digit to 7-digit from 10.0.3."
1155 msgstr "10.0.3から ``Float32`` の値の精度は、 8桁から7桁になります。"
1156
1157 msgid "Fixed a bug that Groonga used the wrong cache when the query that just the parameters of dynamic column different was executed. [GitHub#1102 patched by naoa]"
1158 msgstr "動的カラムのパラメーターだけが違うクエリーが実行された時にGroongaが誤ったキャッシュを使用していた問題を修正しました。 [GitHub#1102 naoaさんがパッチ提供]"
1159
1160 msgid "Release 10.0.2 - 2020-04-29"
1161 msgstr "10.0.2リリース - 2020-04-29"
1162
1163 msgid "Added support for ``uvector`` for ``time_classify_*`` functions. [GitHub#1089][Patched by naoa]"
1164 msgstr "``time_classify_*`` 関数が ``uvector`` に対応しました。 [GitHub#1089][naoaさんがパッチ提供]"
1165
1166 msgid "``uvector`` is a vector that size of elements for vector are fixed."
1167 msgstr "``uvector`` とは、要素のサイズが固定のベクターです。"
1168
1169 msgid "For example, a vector that has values of Time type as elements is a ``uvector``."
1170 msgstr "例えば、Time型の要素を格納しているベクターは ``uvector`` です。"
1171
1172 msgid "Improve sort performance if sort key that can't refer value with zero-copy is mixed."
1173 msgstr "ゼロコピーで値を参照できないソートキーが混在しているケースでソートのパフォーマンスを改善しました。"
1174
1175 msgid "Some sort key (e.g. ``_score``) values can't be referred with zero-copy."
1176 msgstr "いくつかのソートキー(例えば、 ``_score`` 等)の値はゼロコピーで値を参照できません。"
1177
1178 msgid "If there is at least one sort key that can't be referable is included, all sort keys are copied before."
1179 msgstr "これらの値が一つでも含まれる場合、以前は全てのソートキーの値をコピーしていました。"
1180
1181 msgid "With this change, we just copy sort keys that can't be referred. Referable sort keys are just referred without a copy."
1182 msgstr "今回の変更から、参照できないソートキーの値だけコピーし、参照可能なソートキーの値はコピーせずに参照するようにしました。"
1183
1184 msgid "However, this change may have performance regression when all sort keys are referable."
1185 msgstr "ただ、この変更で全てのソートキーの値が参照可能なケースでパフォーマンスが落ちる可能性があります。"
1186
1187 msgid "Added support for loading weight vector as a JSON string."
1188 msgstr "重み付きベクターをJSON文字列としてロードできるようにしました。"
1189
1190 msgid "We can load weight vector as a JSON string as below example."
1191 msgstr "以下の例のように、重み付きベクターをJSON文字列としてロードできます。"
1192
1193 msgid "Added support for ``Float32`` type."
1194 msgstr "``Float32`` 型をサポートしました。"
1195
1196 msgid "Groonga already has a ``Float`` type. However, it is double precision floating point number. Therefore if we only use single precision floating point number, it is not efficient."
1197 msgstr "Groongaは既に ``Float`` 型を持っていますが、これは、倍精度浮動小数点数です。したがって、単精度浮動小数点数のみを使う場合は、効率が悪いです。"
1198
1199 msgid "We can select more suitable type by adding a ``Float32`` type."
1200 msgstr "``Float32`` 型を追加することで、より適切な型を選択できるようになりました。"
1201
1202 msgid "``grn_obj_unref(grn_ctx *ctx, grn_obj *obj)``"
1203 msgstr ""
1204
1205 msgid "This API is only used on the reference count mode (The reference count mode is a state of ``GRN_ENABLE_REFERENCE_COUNT=yes``.)."
1206 msgstr "このAPIは参照カウントモードのときのみ使用します。(参照カウントモードとは、 ``GRN_ENABLE_REFERENCE_COUNT=yes`` の状態のことです。)"
1207
1208 msgid "It calls ``grn_obj_unlink()`` only on the reference count mode. It doesn't do anything except when the reference count mode."
1209 msgstr "このAPIは、参照カウントモードの時のみ ``grn_obj_unlink()`` を呼び出します。参照カウントモード以外の時は、何もしません。"
1210
1211 msgid "We useful it when we need only call ``grn_obj_unlink()`` on the reference count mode."
1212 msgstr "参照カウントモードの時のみ ``grn_obj_unlink()`` を呼び出す必要がある時に便利です。"
1213
1214 msgid "Because as the following example, we don't write condition that whether the reference count mode or not."
1215 msgstr "以下の例のように、参照カウントモードかどうかの条件を書かなくて良くなるためです。"
1216
1217 msgid "The example if we don't use ``grn_obj_unref()``."
1218 msgstr "``grn_obj_unref()`` を使用しない場合の例です。"
1219
1220 msgid "The example if we use ``grn_obj_unref()``."
1221 msgstr "``grn_obj_ubref()`` を使用する場合の例です。"
1222
1223 msgid "``grn_get_version_major(void)``"
1224 msgstr ""
1225
1226 msgid "``grn_get_version_minor(void)``"
1227 msgstr ""
1228
1229 msgid "``grn_get_version_micro(void)``"
1230 msgstr " ``grn_get_version_micro(void)`` "
1231
1232 msgid "They return Groonga's major, minor, and micro version numbers as a ``uint32_t``."
1233 msgstr "``uint32_t`` としてGroongaのメジャー、マイナー、マイクロバージョンを返します。"
1234
1235 msgid "``grn_posting_get_record_id(grn_ctx *ctx, grn_posting *posting)``"
1236 msgstr ""
1237
1238 msgid "``grn_posting_get_section_id(grn_ctx *ctx, grn_posting *posting)``"
1239 msgstr ""
1240
1241 msgid "``grn_posting_get_position(grn_ctx *ctx, grn_posting *posting)``"
1242 msgstr ""
1243
1244 msgid "``grn_posting_get_tf(grn_ctx *ctx, grn_posting *posting)``"
1245 msgstr ""
1246
1247 msgid "``grn_posting_get_weight(grn_ctx *ctx, grn_posting *posting)``"
1248 msgstr ""
1249
1250 msgid "``grn_posting_get_weight_float(grn_ctx *ctx, grn_posting *posting)``"
1251 msgstr ""
1252
1253 msgid "``grn_posting_get_rest(grn_ctx *ctx, grn_posting *posting)``"
1254 msgstr ""
1255
1256 msgid "They return information on the posting list."
1257 msgstr "これらは、ポスティングリストの情報を返します。"
1258
1259 msgid "These APIs return value as a ``uint32_t`` except ``grn_posting_get_weight_float``."
1260 msgstr "これらのAPIは、 ``grn_posting_get_weight_float`` 以外は、 ``uint32_t`` として値を返します。"
1261
1262 msgid "``grn_posting_get_weight_float`` returns value as a ``float``."
1263 msgstr "``grn_posting_get_weight_float`` は ``float`` として値を返します。"
1264
1265 msgid "Section id is the internal representation of the column name."
1266 msgstr "セクションIDとはカラム名の内部表現です。"
1267
1268 msgid "If column name store in posting list as a string, it is a large amount of information and it use waste capacity."
1269 msgstr "カラム名を文字列としてポスティングリストに格納すると、情報量が多くなり無駄な容量を使います。"
1270
1271 msgid "Therefore, Groonga compresses the amount of information and use storage capacity is small by storing column name in the posting list as a number called section id."
1272 msgstr "したがって、カラム名をセクションIDという数値としてポスティングリストに格納することで、情報量を圧縮し使用する容量を少なくしています。"
1273
1274 msgid "``tf`` of ``grn_posting_get_tf`` is Term Frequency score."
1275 msgstr "``grn_posting_get_tf`` の ``tf`` とは、単語の出現頻度です。"
1276
1277 msgid "It returns weight of token as a ``float``."
1278 msgstr "トークンの重みを ``float`` として返します。"
1279
1280 msgid "We suggest using this API when we get a weight of token after this."
1281 msgstr "今後はトークンの重みを取得する際はこのAPIを使用することをおすすめします。"
1282
1283 msgid "Because we modify the internal representation of the weight from ``uint32_t`` to ``float`` in the near future."
1284 msgstr "近い将来、重みは内部的に ``uint32_t`` から ``float`` に変更するためです。"
1285
1286 msgid "Fixed a bug that Groonga for 32bit on GNU/Linux may crash."
1287 msgstr "32bit GUN/Linux等でGroongaがクラッシュすることがある問題を修正しました。"
1288
1289 msgid "Fixed a bug that unrelated column value may be cleared. [GtiHub#1087][Reported by sutamin]"
1290 msgstr "関係のないカラムの値をクリアーしてしまう問題を修正しました。 [GitHub#1087][sutaminさんの報告]"
1291
1292 msgid "Fixed a memory leak when we dumped records with ``dump`` command."
1293 msgstr "``dump`` コマンドでレコードをダンプした時にメモリリークする問題を修正しました。"
1294
1295 msgid "Fixed a memory leak when we specified invalid value into ``output_columns``."
1296 msgstr "``output_columns`` に無効な値を指定した時にメモリリークする問題を修正しました。"
1297
1298 msgid "Fixed a memory leak when we executed ``snippet`` function."
1299 msgstr "``snippet`` 関数を実行する時にメモリリークする問題を修正しました。"
1300
1301 msgid "Fixed a memory leak when we filled the below conditions."
1302 msgstr "以下の条件を満たした時にメモリリークする問題を修正しました。"
1303
1304 msgid "If we used dynamic columns on the ``initial`` stage."
1305 msgstr "``initial`` ステージで動的カラムを使用した場合。"
1306
1307 msgid "If we used ``slices`` argument with ``select`` command."
1308 msgstr "``select`` コマンドの引数 ``slices`` を使用した場合。"
1309
1310 msgid "Fixed a memory leak when we deleted tables with ``logical_table_remove``."
1311 msgstr "``logical_table_remove`` でテーブルを削除した際にメモリリークする問題を修正しました。"
1312
1313 msgid "Fixed a memory leak when we use the reference count mode."
1314 msgstr "参照カウントモードを使用した時にメモリリークする問題を修正しました。"
1315
1316 msgid "The reference count mode is a ``GRN_ENABLE_REFERENCE_COUNT=yes`` state."
1317 msgstr "参照カウントモードとは、 ``GRN_ENABLE_REFERENCE_COUNT=yes`` の状態のことです。"
1318
1319 msgid "This mode is experimental. Performance may degrade by this mode."
1320 msgstr "この機能は実験的です。パフォーマンスが低下することがあります。"
1321
1322 msgid "Fixed a bug that Groonga too much unlink ``_key`` accessor when we load data for apache arrow format."
1323 msgstr "Apache Arrow形式でデータをロードした際に ``_key`` アクセサーを解放しすぎる問題を修正しました。"
1324
1325 msgid "Release 10.0.1 - 2020-03-30"
1326 msgstr "10.0.1リリース - 2020-03-30"
1327
1328 msgid "We have been released Groonga 10.0.1. Because Ubuntu and Windows(VC++ version) package in Groonga 10.0.0 were mistaken."
1329 msgstr "Groonga 10.0.0 のUbuntuとWindows(VC++版)のパッケージに誤りがあったため Groonga 10.0.1 をリリースしました。"
1330
1331 msgid "If we have already used Groonga 10.0.0 for CentOS, Debian, Windows(MinGW version), no problem with continued use it."
1332 msgstr "既にCentOS、Debian、Windows(MinGW版)のGroonga 10.0.0を使用している方は、そのまま使っていただいて問題ありません。"
1333
1334 msgid "Added a missing runtime(vcruntime140_1.dll) in package for Windows VC++ version."
1335 msgstr "Windows(VC++版)のパッケージに不足していたランタイム(vcruntime140_1.dll)を追加しました。"
1336
1337 msgid "Release 10.0.0 - 2020-03-29"
1338 msgstr "10.0.0リリース - 2020-03-29"
1339
1340 msgid "[httpd] Updated bundled nginx to 1.17.9."
1341 msgstr "[httpd] バンドルしているnginxのバージョンを1.17.9に更新しました。"
1342
1343 msgid "[httpd] Added support for specifying output type as an extension."
1344 msgstr "[httpd] 出力形式を拡張子として指定できるようにしました。"
1345
1346 msgid "For example, we can write ``load.json`` instead of ``load?output_type=json``."
1347 msgstr "例えば、 ``load?output_type=json`` の代わりに ``load.json`` と書けます。"
1348
1349 msgid "[:doc:`/reference/log`] Outputted a path of opened or closed file into a log of dump level on Linux."
1350 msgstr "[:doc:`/reference/log`] Linuxのdumpレベルのログにオープンしたファイルとクローズしたファイルのパスを出力するようにしました。"
1351
1352 msgid "[:doc:`/reference/log`] Outputted a path of closed file into a log of debug level on Windows."
1353 msgstr "[:doc:`/reference/log`] Windowsのdebugレベルのログにオープンしたファイルとクローズしたファイルのパスを出力するようにしました。"
1354
1355 msgid "Added following API and macros"
1356 msgstr "以下のAPIとマクロを追加しました。"
1357
1358 msgid "``grn_timeval_from_double(grn_ctx, double)``"
1359 msgstr ""
1360
1361 msgid "This API converts ``double`` type to ``grn_timeval`` type."
1362 msgstr "このAPIは、 ``double`` 型を ``grn_timeval`` 型に変換します。"
1363
1364 msgid "It returns value of ``grn_timeval`` type."
1365 msgstr "``grn_timeval`` 型の値を返します。"
1366
1367 msgid "``GRN_TIMEVAL_TO_NSEC(timeval)``"
1368 msgstr ""
1369
1370 msgid "This macro converts value of ``grn_timeval`` type to nanosecond as the value of ``uint64_t`` type."
1371 msgstr "このマクロは、 ``grn_timeval`` 型の値を ``uint64_t`` 型の値としてナノ秒に変換します。"
1372
1373 msgid "``GRN_TIME_USEC_TO_SEC(usec)``"
1374 msgstr ""
1375
1376 msgid "This macro converts microsecond to second."
1377 msgstr "このマクロは、ミリ秒を秒に変換します。"
1378
1379 msgid "Deprecated the following macro."
1380 msgstr "以下のマクロを非推奨にしました。"
1381
1382 msgid "``GRN_OBJ_FORMAT_FIN(grn_ctx, grn_obj_format)``"
1383 msgstr ""
1384
1385 msgid "We ``grn_obj_format_fin(grn_ctx, grn_obj_format)`` use instead since 10.0.0."
1386 msgstr "10.0.0から代わりに ``grn_obj_format_fin(grn_ctx, grn_obj_format)`` を使ってください。"
1387
1388 msgid "[:doc:`/reference/commands/logical_range_filter`],[:doc:`/reference/commands/dump`] Added support for stream output."
1389 msgstr "[:doc:`/reference/commands/logical_range_filter`],[:doc:`/reference/commands/dump`] ストリーム出力に対応しました。"
1390
1391 msgid "This feature requires ``command_version 3`` or later. The header content is outputted after the body content."
1392 msgstr "この機能は ``command_version 3`` 以降で使えます。headerがbodyの後に出力されます。"
1393
1394 msgid "Currently, this feature support only ``dump`` and ``logical_range_filter``."
1395 msgstr "現在、この機能をサポートしているのは、 ``dump`` と ``logical_range_filter`` のみです。"
1396
1397 msgid "``logical_range_filter`` always returns the output as a stream on ``command_version 3`` or later."
1398 msgstr "``logical_range_filter`` は、 ``command_version 3`` 以降では、常に出力がstreamとして返ります。"
1399
1400 msgid "This feature has the following limitations."
1401 msgstr "この機能は以下の制限があります。"
1402
1403 msgid "-1 is only allowed for negative ``limit``"
1404 msgstr "``limit`` に指定できる負の値は -1 のみです。"
1405
1406 msgid "MessagePack output isn't supported"
1407 msgstr "MessagePack形式の出力はサポートしていません。"
1408
1409 msgid "We a little changed the response contents of JSON by this modify."
1410 msgstr "この変更で、JSONの応答内容を少し変更しています。"
1411
1412 msgid "The key order differs from before versions as below."
1413 msgstr "以下のように以前のバージョンとは、キーの順序が異なっています。"
1414
1415 msgid "The key order in before versions."
1416 msgstr "以前のバージョンのキーの順序"
1417
1418 msgid "The key order in this version(10.0.0)."
1419 msgstr "本バージョン(10.0.0)のキーの順序"
1420
1421 msgid "Disabled caches of ``dump`` and ``logical_range_filter`` when they execute on ``command_version 3``."
1422 msgstr "``dump`` と ``logical_range_filter`` を ``command_version 3`` で実行した時はキャッシュが効きません。"
1423
1424 msgid "Because of ``dump`` and ``logical_range_filter`` on ``command_version 3`` returns stream since 10.0.0, Groonga can not cache the whole response."
1425 msgstr "10.0.0から ``dump`` と ``logical_range_filter`` は ``command_version 3`` の時にストリームで応答を返すので、応答全体をキャッシュできないためです。"
1426
1427 msgid "[:doc:`/reference/commands/logical_range_filter`] Added support for outputting response as Apache Arrow format."
1428 msgstr "[:doc:`/reference/commands/logical_range_filter`] Apache Arrow形式での応答をサポートしました。"
1429
1430 msgid "Supported data type as below."
1431 msgstr "以下のデータ型をサポートしています。"
1432
1433 msgid "``UInt8``"
1434 msgstr ""
1435
1436 msgid "``Int8``"
1437 msgstr ""
1438
1439 msgid "``UInt16``"
1440 msgstr ""
1441
1442 msgid "``Int16``"
1443 msgstr ""
1444
1445 msgid "``UInt32``"
1446 msgstr ""
1447
1448 msgid "``Int32``"
1449 msgstr ""
1450
1451 msgid "``UInt64``"
1452 msgstr ""
1453
1454 msgid "``Int64``"
1455 msgstr ""
1456
1457 msgid "``Time``"
1458 msgstr ""
1459
1460 msgid "``ShortText``"
1461 msgstr ""
1462
1463 msgid "``Text``"
1464 msgstr ""
1465
1466 msgid "``LongText``"
1467 msgstr ""
1468
1469 msgid "``Vector`` of ``Int32``"
1470 msgstr ""
1471
1472 msgid "``Reference vector``"
1473 msgstr ""
1474
1475 msgid "Supported Ubuntu 20.04 (Focal Fossa)."
1476 msgstr "Ubuntu 20.04 (Focal Fossa)をサポートしました。"
1477
1478 msgid "Dropped Ubuntu 19.04 (Disco Dingo)."
1479 msgstr "Ubuntu 19.04 (Disco Dingo)のサポートをやめました。"