Debian Codegraph @

doc/locale/ja/LC_MESSAGES/news/12.po

raw
1 # -*- po -*-
2 # Japanese translations for 1.2.4 package.
3 # Copyright (C) 2009-2011, Brazil, Inc
4 # This file is distributed under the same license as the groonga package.
5 # Kouhei Sutou <[email protected]>, 2011.
6 #
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: 1.2.4\n"
10 "Report-Msgid-Bugs-To: \n"
11 "PO-Revision-Date: 2023-07-24 13:19+0900\n"
12 "Language-Team: Japanese\n"
13 "Language: ja\n"
14 "MIME-Version: 1.0\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17 "Plural-Forms: nplurals=1; plural=0;\n"
18
19 msgid "1"
20 msgstr ""
21
22 msgid "2"
23 msgstr ""
24
25 msgid "4"
26 msgstr ""
27
28 msgid "``Groonga``"
29 msgstr ""
30
31 msgid "``Groonga`` and ``Mroonga``"
32 msgstr "``Groonga`` かつ ``Mroonga``"
33
34 msgid "``Groonga`` and ``Mroonga`` and ``PGroonga``"
35 msgstr "``Groonga`` かつ ``Mroonga`` かつ ``PGroonga``"
36
37 msgid "``Groonga`` and ``PGroonga``"
38 msgstr "``Groonga`` かつ ``PGroonga``"
39
40 msgid "``Mroonga``"
41 msgstr ""
42
43 msgid "``Mroonga`` and ``PGroonga``"
44 msgstr "``Mroonga`` かつ ``PGroonga``"
45
46 msgid "``PGroonga``"
47 msgstr ""
48
49 msgid "number of occurrence"
50 msgstr "登場回数"
51
52 msgid "tag"
53 msgstr "タグ"
54
55 msgid "News - 12 series"
56 msgstr "お知らせ - 12系"
57
58 msgid "Release 12.1.2 - 2023-01-29"
59 msgstr "12.1.2リリース - 2023-01-29"
60
61 msgid "Improvements"
62 msgstr "改良"
63
64 msgid "[httpd] Updated bundled nginx to 1.23.3."
65 msgstr "[httpd] バンドルしているnginxのバージョンを1.23.3に更新しました。"
66
67 msgid "Release 12.1.1 - 2023-01-06"
68 msgstr "12.1.1リリース - 2023-01-06"
69
70 msgid "[:doc:`/reference/commands/select`][:ref:`select-drilldowns-label-key-vector-expansions-power-set`] Vector's power set is now able to aggregate with the drilldowns."
71 msgstr "[:doc:`/reference/commands/select`][:ref:`select-drilldowns-label-key-vector-expansions-power-set`] ドリルダウンでベクターのべき集合を集計できるようになりました。"
72
73 msgid "A new option ``key_vector_expansion`` is added to drilldowns. Currently, ``NONE`` or ``POWER_SET`` can be specified for ``key_vector_expansion``."
74 msgstr "ドリルダウンに 新しいオプション ``key_vector_expansion`` を追加しました。 ``key_vector_expansion`` は、ドリルダウン対象のキーがベクターのときに、キーの展開方法を指定します。 現状は、``key_vector_expansion`` には ``NONE`` または ``POWER_SET`` が指定できます。"
75
76 msgid "Specifying ``POWER_SET`` to ``key_vector_expansion`` allows to aggregate for power set case. This method of aggregation is useful to aggregate total number of individual and combination tag occurrence at once."
77 msgstr "``key_vector_expansion`` に ``POWER_SET`` を指定することで、べき集合での集計ができるようになります。 この集計方法は、例えばタグの出現回数と、タグの組み合わせの出現回数を一度に集計したい場合に便利です。"
78
79 msgid "Following example is to see aggregating total number of individual and combination occurrence for following 3 tags, ``Groonga``, ``Mroonga``, and ``PGroonga``."
80 msgstr "以下は、 ``Groonga`` 、 ``Mroonga`` 、 ``PGroonga`` という3つのタグに対して、これらのタグの出現回数と、 これらの組み合わせの出現回数を集計するケースを考えます。"
81
82 msgid "Sample case:"
83 msgstr "実行例:"
84
85 msgid "This result shows following."
86 msgstr "この集計結果から、以下のことがわかります。"
87
88 msgid "This feature is complex. For more information, please refer to :ref:`select-drilldowns-label-key-vector-expansions-power-set`."
89 msgstr "複雑な機能なので、 :ref:`select-drilldowns-label-key-vector-expansions-power-set` も合わせて参照してください。"
90
91 msgid "[:doc:`/reference/commands/select`] Specific element of vector column is now able to be search target."
92 msgstr "[:doc:`/reference/commands/select`] ベクターカラムの特定の要素のみを対象に検索できるようになりました。"
93
94 msgid "It allows specific elements of vector column to be search targets that specifying the specific elements to ``match_columns`` with index number."
95 msgstr "``match_columns`` にベクターカラムの特定の要素をインデックス番号で指定することで、ベクターカラムの特定の要素のみを対象に検索できるようになりました。"
96
97 msgid "Following is a sample case."
98 msgstr "以下はこの機能の例です。"
99
100 msgid "``--match_columns \"contents[1]\"`` specifies only 2nd vector elements of ``contents`` as the search target. In this sample, ``[\"I like Groonga\", \"Use Groonga with Ruby\"]`` is shown in the results because ``Ruby`` is in 2nd element ``Use Groonga with Ruby``. However, ``[\"I like Ruby\", \"Use Groonga\"]`` is not shown in results because ``Ruby`` is not in 2nd element ``Use Groonga``."
101 msgstr "``--match_columns \"contents[1]\"`` とすることで、 ``contents`` ベクターの第2要素のみを ``--query`` の対象にしています。この例では、 ``[\"I like Groonga\", \"Use Groonga with Ruby\"]`` は第2要素 ``Use Groonga with Ruby`` に ``Ruby`` を含むのでヒットしていますが、 ``[\"I like Ruby\", \"Use Groonga\"]`` は第2要素 ``Use Groonga`` に ``Ruby`` を含まないのでヒットしていません。"
102
103 msgid "[:doc:`/reference/commands/load`] Added support for ``YYYY-MM-DD`` time format."
104 msgstr "[:doc:`/reference/commands/load`] ``YYYY-MM-DD`` 形式をサポートしました。"
105
106 msgid "``YYYY-MM-DD`` is a general time format. Supporting this time format made ``load`` more useful."
107 msgstr "``YYYY-MM-DD`` は一般的な時間形式です。この形式をサポートしたことで、 ``load`` がより使いやすくなりました。"
108
109 msgid "The time of the loaded value is set to ``00:00:00`` on the local time."
110 msgstr "ロードされた値の時間部分は、現地時間の ``00:00:00`` になります。"
111
112 msgid "Fixes"
113 msgstr "修正"
114
115 msgid "[:doc:`/reference/commands/select`] Fix a bug displaying a wrong label in ``drilldown`` results when ``command_version`` is ``3``. [groonga-dev,05005][Reported by Atsushi Shinoda]"
116 msgstr "[:doc:`/reference/commands/select`] ``command_version`` が ``3`` のとき、 ``drilldown`` の結果のラベルが不正になる問題を修正しました。 [groonga-dev,05005][篠田さんの報告]"
117
118 msgid "``ctor``, displaying right after ``drilldowns`` as result of ``select``, should be ``tag1`` in correct case. In this sample, ``ctor`` is shown instead of ``tag1``. However, what kind of value to be shown is unknown."
119 msgstr "``select`` の実行結果の ``drilldowns`` 直後の ``ctor`` は、本来 ``tag1`` であるべきです。 この例では ``tag1`` ではなく ``ctor`` という値になっていますが、どのような値になるかは不定です。"
120
121 msgid "[:doc:`/reference/normalizers/normalizer_table`] Fix a bug for Groonga to crush with specific definition setting in ``NormalizerTable``. [GitHub:pgroonga/pgroonga#279][Reported by i10a]"
122 msgstr "[:doc:`/reference/normalizers/normalizer_table`] 特定の定義が ``NormalizerTable`` に存在する場合、Groongaがクラッシュすることがある問題を修正しました。 [GitHub:pgroonga/pgroonga#279][i10aさんの報告]"
123
124 msgid "Following case as sample."
125 msgstr "以下の例を考えます。"
126
127 msgid "This bug is reported to occur when condition meet following 1., 2., and 3.."
128 msgstr "この問題は、以下の1.、2.、3.の条件を満たした時に発生します。"
129
130 msgid "Keys are normalized in the target table."
131 msgstr "対象となるテーブルのキーがノーマライズされる"
132
133 msgid "In this sample, it meets condition specifying ``--normalizer NormalizerNFKC130`` in ``Normalizations``. Original keys, ``Ⅰ`` , ``Ⅱ`` ,and ``Ⅲ``, are normalized each into ``i``, ``ii``, ``iii`` with ``NormalizerNFKC130``."
134 msgstr "この例では、 ``Normalizations`` に ``--normalizer NormalizerNFKC130`` が指定されているので、この条件を満たしています。``Ⅰ`` 、 ``Ⅱ`` 、 ``Ⅲ`` はそれぞれ ``NormalizerNFKC130`` によって ``i`` 、 ``ii`` 、 ``iii`` にノーマライズされます。"
135
136 msgid "Same characters in the normalized key are included in the other normalized key."
137 msgstr "ノーマライズされた文字列に他のノーマライズされた文字列が含まれている"
138
139 msgid "In this sample, it meets condition because normalized key ``iii`` includes the characters ``ii`` and ``i``, same with other normalized keys which are original key ``Ⅱ`` and ``Ⅰ``."
140 msgstr "上記のノーマライズ後の値を考えると、 ``iii`` が ``ii`` と ``i`` を含んでいるため、条件を満たしています。``ii`` は ``i`` それぞれノーマライズ前の ``Ⅱ`` と ``Ⅰ`` に対応します。"
141
142 msgid "Same characters of 2nd condition are used multiple times."
143 msgstr "2.の文字列を複数使用する"
144
145 msgid "In this sample, it meets condition because normalized key ``iiii``, original key ``ⅡⅡ`` with ``NormalizerNFKC130``, is considered as same with normalized key for ``Ⅲ`` and ``Ⅰ`` with ``NormalizerNFKC130``."
146 msgstr "``normaize`` の対象である ``ⅡⅡ`` は ``NormalizerNFKC130`` によって ``iiii`` にノーマライズされます。 この値に対して、 ``Normalizations`` の ``NormalizerNFKC130`` によるノーマライズ後の値が一致条件として使用されてノーマライズされます。"
147
148 msgid "Normalizing ``iiii`` with ``Normalizations`` takes following steps and it meets the condition."
149 msgstr "したがって、 ``iiii`` を ``Normalizations`` でノーマライズしようとするときには、以下の順番でノーマライズされるため、この条件を満たしています。"
150
151 msgid "First ``iii`` ( applied for ``Ⅲ`` )"
152 msgstr "最初の ``iii`` ( ``Ⅲ`` に対応)"
153
154 msgid "``ii`` or ``i`` are not used at first because :doc:`/reference/normalizers/normalizer_table` works with the Longest-Common-Prefix search."
155 msgstr ":doc:`/reference/normalizers/normalizer_table` は最長共通接頭辞探索を行うため、 最初は ``ii`` や ``i`` ではなく ``iii`` が使用されます。"
156
157 msgid "Last ``i`` ( applied for ``Ⅰ`` )"
158 msgstr "残りの ``i`` ( ``Ⅰ`` に対応)"
159
160 msgid "Thanks"
161 msgstr "感謝"
162
163 msgid "i10a"
164 msgstr "i10aさん"
165
166 msgid "Atsushi Shinoda"
167 msgstr "篠田さん"
168
169 msgid "Release 12.1.0 - 2022-11-29"
170 msgstr "12.1.0リリース - 2022-11-29"
171
172 msgid "[:doc:`/reference/commands/load`] Added support for slow log output of ``load``."
173 msgstr "[:doc:`/reference/commands/load`] ``load`` のスローログの出力に対応しました。"
174
175 msgid "This feature is for Groonga's performance tuning. For example, you can use this feature to detect records that are taking time longer than average when ``load`` is slow."
176 msgstr "この機能は、Groongaのパフォーマンスチューニングに使用します。例えば、 ``load`` が遅いときに、この機能を使うことで平均よりも時間がかかっているレコードを検出できます。"
177
178 msgid "Slow log output would be enabled with specifying ``GRN SLOWLOG THRESHOLD`` as the Environment variable."
179 msgstr "環境変数 ``GRN_SLOW_LOG_THRESHOLD`` を指定することで、スローログの出力が有効になります。"
180
181 msgid "Here is about specifying ``GRN_SLOW_LOG_THRESHOLD``."
182 msgstr "``GRN_SLOW_LOG_THRESHOLD`` については以下のとおりです。"
183
184 msgid "``GRN_SLOW_LOG_THRESHOLD`` requires specifying time in seconds as a threshold. The time of the threshold can shorter than a second with specifying decimal number."
185 msgstr "``GRN_SLOW_LOG_THRESHOLD`` にはしきい値となる時間を秒単位で指定します。小数を指定することで、1秒よりも短い時間も指定できます。"
186
187 msgid "A log with debug level would be output if the processing time takes longer than specified time with ``GRN_SLOW_LOG_THRESHOLD``."
188 msgstr "``GRN_SLOW_LOG_THRESHOLD`` で指定された時間よりも時間がかかっている処理がある場合、デバッグレベルのログが出力されます。"
189
190 msgid "Setting for log level would be controlled with :option:`log-level <groonga --log-level>` or :doc:`/reference/commands/log_level`."
191 msgstr "ログレベルの設定は :option:`log-level <groonga --log-level>` オプションまたは :doc:`/reference/commands/log_level` コマンドで変更可能です。"
192
193 msgid "What value to specify ``GRN_SLOW_LOG_THRESHOLD`` would depend on its environment and checking purpose. For an example, we can use following setting to check which records are taking longer time for ``load``. For this, we specify the value based on necesarry time per 1 record calculated with total number and time of ``load``."
194 msgstr "``GRN_SLOW_LOG_THRESHOLD`` にどのような値を指定すべきかは環境や調べたい内容に依存します。例えば、 ``load`` の件数と所要時間から、1レコードあたりの所要時間を求め、その値を指定することが考えられます。こうすることで、平均よりも ``load`` に時間がかかっているレコードを調べることができます。"
195
196 msgid "Necessary time to process `load` would be checked in :ref:`query-log`."
197 msgstr "``load`` の所要時間は :ref:`query-log` から確認することができます。"
198
199 msgid "In this example, the time would be as following;"
200 msgstr "この例では、所要時間は以下のようになっています。"
201
202 msgid "Number of records: 100000"
203 msgstr "レコード数: 100000件"
204
205 msgid "Time to process: 2 minutes 13 seconds = 133 seconds ( Based on Time stamp for beginning ``load`` : 16:43:27 and time stamp for end of ``load`` ( ``rc=0`` ): 16:43:40 )"
206 msgstr "所要時間: 2分13秒 = 133秒 ( ``load`` の開始時間 16:43:27 と ``load`` の終了時間( ``rc=0`` )16:43:40 に基づいています。 )"
207
208 msgid "Time to process 1 record: 0.00133 seconds (133 divided with 100000)"
209 msgstr "1行あたりの所要時間: 0.00133 秒"
210
211 msgid "Therefore, we specify ``0.00133`` as a threshold in ``GRN_SLOW_LOG_THRESHOLD`` to check which records are taking longer time for ``load``."
212 msgstr "したがって、どのレコードが時間がかかっているのか調べるためには、 ``GRN_SLOW_LOG_THRESHOLD`` に ``0.00133`` を指定します。"
213
214 msgid "Note: Enabling slow log may cause following bad effects."
215 msgstr "スローログを有効化すると以下の悪影響があることに注意してください。"
216
217 msgid "Performance degradation"
218 msgstr "パフォーマンスの悪化"
219
220 msgid "Larger log size"
221 msgstr "ログサイズの肥大化"
222
223 msgid "Thus, the slow log is recommended to be enabled only necessary occasion."
224 msgstr "そのため、必要な場合にのみこのスローログを有効にすることを推奨します。"
225
226 msgid "[:doc:`/reference/api`] Added new API ``grn_is_reference_count_enable()``."
227 msgstr "[:doc:`/reference/api`] 新しいAPI ``grn_is_reference_count_enable()`` を追加しました。"
228
229 msgid "This new API would return boolean weather reference count mode is enabled or not."
230 msgstr "参照カウントモードが有効になっているかどうかの真偽値を返却します。"
231
232 msgid "[:doc:`/reference/api`] Added new API ``grn_set_reference_count_enable(bool enable)``."
233 msgstr "[:doc:`/reference/api`] 新しいAPI ``grn_set_reference_count_enable(bool enable)`` を追加しました。"
234
235 msgid "This new API would enable or disable reference count mode."
236 msgstr "参照カウントモードの有効/無効を切り替えます。"
237
238 msgid "For secure usage, this API can't switch reference count mode if there are multiple open database."
239 msgstr "安全のため、複数のテーブルを開いている場合は参照カウントモードを切り替えません。"
240
241 msgid "[:doc:`/reference/api`] Added new API ``grn_is_back_trace_enable()``."
242 msgstr "[:doc:`/reference/api`] 新しいAPI ``grn_is_back_trace_enable()`` を追加しました。"
243
244 msgid "This new API would return boolean weather logging back trace is enabled or not."
245 msgstr "バックトレースの出力が有効になっているかどうかの真偽値を返却します。"
246
247 msgid "[:doc:`/reference/api`] Added new API ``grn_set_back_trace_enable(bool enable)``."
248 msgstr "[:doc:`/reference/api`] 新しいAPI ``grn_set_back_trace_enable(bool enable)`` を追加しました。"
249
250 msgid "This new API would enable or disable logging back trace."
251 msgstr "バックトレース(back trace)の出力の有効/無効を切り替えます。"
252
253 msgid "In some environments, Groonga crashes when logging back trace, logging back trace should be disabled in such envoronments."
254 msgstr "バックトレースの出力時にクラッシュする環境があるため、その環境では無効化します。"
255
256 msgid "[:doc:`/reference/commands/status`] Added new items: ``back_trace`` and ``/reference_count``."
257 msgstr "[:doc:`/reference/commands/status`] 新しい項目 ``back_trace`` と ``/reference_count`` を追加しました。"
258
259 msgid "``/reference_count`` indicates weather logging back trace is enabled or not as boolean."
260 msgstr "``back_trace`` はバックトレースの出力が有効になっているかどうかを真偽値で返却します。"
261
262 msgid "``back_trace`` indicates weather logging back trace is enabled or not as boolean."
263 msgstr "``/reference_count`` は参照カウントモードが有効になっているかどうかを真偽値で返却します。"
264
265 msgid "[:doc:`/reference/commands/select`][:doc:`/reference/columns/vector`] Fixed a bug displaying integer in the results when a weight vector column specifies `WEIGHT FLOAT32`."
266 msgstr "[:doc:`/reference/commands/select`][:doc:`/reference/columns/vector`] 重み付きベクターカラムで ``WEIGHT_FLOAT32`` を指定したとき、結果が整数で表示されていた問題を修正しました。"
267
268 msgid "This bug was only appeared in use of a weight vector column without reference type. A reference type weight vector column does not have this bug."
269 msgstr "参照型の重み付きベクターカラムにはこの問題はなく、参照型ではない重み付きベクターカラムにだけこの問題がありました。"
270
271 msgid "The bug only affected on the final result display even though internal processes was in floating-point number."
272 msgstr "内部的な処理は浮動小数点数で行われていましたが、最終的な結果の表示が整数になっていました。"
273
274 msgid "An example for this bug as follows;"
275 msgstr "以下は、この問題の例です。"
276
277 msgid "``tags`` column is a ``ShortText`` type weight vector column, sample of non-reference type weight vector column."
278 msgstr "``tags`` カラムが ``ShortText`` 型の重み付きベクターカラム、つまり参照型でない重み付きベクターカラムです。"
279
280 msgid "The results in this sample, the value 2 and 1 are returned as below, evne though the correct value should be 2.8 and 1.2."
281 msgstr "この例の ``select`` の結果の以下の部分は、それぞれ2.8、1.2であるべきですが、2、1と誤った結果が返却されていました。"
282
283 msgid "Applying this fix, the results would be returned as follows;"
284 msgstr "この修正により、以下のように正しい結果が返却されるようになりました。"
285
286 msgid "Release 12.0.9 - 2022-10-28"
287 msgstr "12.0.9リリース - 2022-10-28"
288
289 msgid "[:doc:`/install/almalinux`] Added support for AlmaLinux 9."
290 msgstr "[:doc:`/install/almalinux`] AlmaLinux 9 向けのパッケージをサポートしました。"
291
292 msgid "We had added this support at :ref:`release-12-0-8` but haven't announced it."
293 msgstr ":ref:`release-12-0-8` でサポートしていましたが、アナウンスしていませんでした。"
294
295 msgid "[:doc:`/reference/functions/escalate`] Added a document for the ``escalate()`` function."
296 msgstr "[:doc:`/reference/functions/escalate`] ``escalate()`` 関数のドキュメントを追加しました。"
297
298 msgid "[:doc:`/reference/normalizers`] Added ``NormalizerHTML``. (Experimental)"
299 msgstr "[:doc:`/reference/normalizers`] ``NormalizerHTML`` を追加しました。(実験的)"
300
301 msgid "``NormalizerHTML`` is a normalizer for HTML."
302 msgstr "``NormalizerHTML`` はHTML用のノーマライザーです。"
303
304 msgid "Currently ``NormalizerHTML`` supports removing tags like ``<span>`` or ``</span>`` and expanding character references like ``&amp;`` or ``&#38;``."
305 msgstr "現在 ``NormalizerHTML`` は ``<span>`` や ``</span>`` といったタグの削除と、``&amp;`` や ``&#38;`` といった文字参照の展開を行います。"
306
307 msgid "Here are sample queries for ``NormalizerHTML``."
308 msgstr "以下は ``NormalizerHTML`` の例です。"
309
310 msgid "In this sample ``<span>`` and ``</span>`` are removed, and ``&amp;`` and ``&#38;`` are expanded to ``&``."
311 msgstr "この例では、 ``<span>`` と ``</span>`` は削除され、 ``&amp;`` と ``&#38;`` は ``&`` に展開されています。"
312
313 msgid "We can specify whether removing the tags with the ``remove_tag`` option. (The default value of the ``remove_tag`` option is ``true``.)"
314 msgstr "タグを削除するかどうかは ``remove_tag`` オプションで指定できます。(``remove_tag`` オプションのデフォルト値は ``true`` です。)"
315
316 msgid "In this sample, ``<span>`` and ``</span>`` are not removed."
317 msgstr "この例では、 ``<span>`` と ``</span>`` は削除されていません。"
318
319 msgid "We can specify whether expanding the character references with the ``expand_character_reference`` option. (The default value of the ``expand_character_reference`` option is ``true``.)"
320 msgstr "文字参照を展開するかどうかは ``expand_character_reference`` オプションで指定できます。(``expand_character_reference`` オプションのデフォルト値は ``true`` です。)"
321
322 msgid "In this sample, ``&amp;`` and ``&#38;`` are not expanded."
323 msgstr "この例では、 ``&amp;`` と ``&#38;`` は展開されていません。"
324
325 msgid "[httpd] Updated bundled nginx to 1.23.2."
326 msgstr "[httpd] バンドルしているnginxのバージョンを1.23.2に更新しました。"
327
328 msgid "Contains security fixes of CVE-2022-41741 and CVE-2022-41742. Please refer to https://nginx.org/en/CHANGES about these security fixes."
329 msgstr "CVE-2022-41741とCVE-2022-41742のセキュリティの修正が含まれています。これらのセキュリティーの修正の詳細については、https://nginx.org/en/CHANGES を参照してください。"
330
331 msgid "Suppressed logging a lot of same messages when no memory is available."
332 msgstr "メモリーが不足した際に、同じログが大量に出力されないように変更しました。"
333
334 msgid "Groonga could log a lot of ``mmap failed!!!!`` when no memory is available. We improved to log the above message as less duplicates as possible."
335 msgstr "メモリーが不足した際に、 ``mmap failed!!!!`` というメッセージが大量にログが記載されることがありました。このメッセージを可能な限り重複してログ出力されないように改良しました。"
336
337 msgid "[:doc:`/reference/commands/select`] Fixed a bug that Groonga could crash or return incorrect results when specifying :ref:`select-n-workers`."
338 msgstr "[:doc:`/reference/commands/select`] :ref:`select-n-workers` を指定したとき、Groongaがクラッシュしたり、誤った結果を返すことがある問題を修正しました。"
339
340 msgid "This bug had occurred when using :ref:`select-n-workers` with a value greater than ``1`` and ``drilldowns[{LABEL}].filter`` at the same time."
341 msgstr "この問題は、 :ref:`select-n-workers` に ``1`` より大きい値を指定し、かつ同時に ``drilldowns[{LABEL}].filter`` を使用している場合に発生していました。"
342
343 msgid "The reason why this bug occurred was because Groonga referenced incorrect values (objects) when performing internal parallel processing. So if the condition above was satisfied, Groonga sometimes crashed or returned incorrect results depending on the timing of the parallel processing."
344 msgstr "この問題は内部的な並列処理の際に、誤った値(オブジェクト)を参照していたことが原因で発生していました。そのため、上記の条件が満たされたとき、内部的に並列処理のタイミングによって、Groongaがクラッシュしたり誤った値を返すことがありました。"
345
346 msgid "Release 12.0.8 - 2022-10-03"
347 msgstr "12.0.8リリース - 2022-10-03"
348
349 msgid "Changed specification of the ``escalate()`` function (Experimental) to make it easier to use."
350 msgstr "``escalate()`` 関数(実験的)の仕様を使いやすいように変更しました。"
351
352 msgid "We changed to not use results out of ``escalate()``."
353 msgstr "``escalate()`` の外部の結果セットを使用しないように変更しました。"
354
355 msgid "In the previous specification, users had to guess how many results would be passed to ``escalate()`` to determine the first threshold, which was incovenient."
356 msgstr "前回の仕様では、ユーザーはどのくらいの結果が ``escalate()`` に渡されるのか推測して最初のしきい値を決める必要があり、不便でした。"
357
358 msgid "Here is a example for the previous ``escalate()``."
359 msgstr "以下は前回の ``escalate()`` の例です。"
360
361 msgid "``CONDITION1`` was executed when the results of ``number_column > 10`` was less or equal to ``THRESHOLD_1`` . Users had to guess how many results would they get from ``number_column > 10`` to determine ``THRESHOLD_1``."
362 msgstr "``CONDITION1`` は ``number_column > 10`` の結果が ``THRESHOLD_1`` 以下の時に実行されます。ユーザーは ``THRESHOLD_1`` を決めるのに ``number_column > 10`` がどのくらいの結果を返すのか推測する必要がありました。"
363
364 msgid "From this release, the users don't need to guess how many results will they get from ``number_column > 10``, making it easier to set the thresholds."
365 msgstr "今回のリリースから、ユーザーが ``number_column > 10`` がどのくらいの結果を返すのか推測する必要がなくなり、使いやすくなりました。"
366
367 msgid "With this change, the syntax of ``escalate()`` changed as follow."
368 msgstr "この変更により、 ``escalate()`` の構文が以下の通り変更されています。"
369
370 msgid "The previous syntax"
371 msgstr "前回の構文"
372
373 msgid "The new syntax"
374 msgstr "新しい構文"
375
376 msgid "Here are details of the syntax changes."
377 msgstr "以下は構文の変更の詳細です。"
378
379 msgid "Don't require the threshold for the first condition."
380 msgstr "最初の条件のためのしきい値は不要となりました。"
381
382 msgid "Don't allow empty arguments call. The first condition is required."
383 msgstr "引数の指定を必須としました。最初の条件が必須となります。"
384
385 msgid "Always execute the first condition."
386 msgstr "最初の引数を常に実行します。"
387
388 msgid "This function is experimental. These behaviors may be changed in the future."
389 msgstr "この関数は実験的な関数です。将来的にこれらの動作は変更になる可能性があります。"
390
391 msgid "[:doc:`/install/cmake`] Added a document about how to build Groonga with CMake."
392 msgstr "[:doc:`/install/cmake`] CMakeを使ってビルドする方法を追加しました。"
393
394 msgid "[:doc:`/install/others`] Added descriptions about how to enable/disable Apache Arrow support when building with GNU Autotools."
395 msgstr "[:doc:`/install/others`] GNU Autotoolsを使ってビルドする場合に、Apache Arrowの機能を有効化/無効化する方法について追加しました。"
396
397 msgid "[:doc:`/reference/commands/select`] Added a document about :ref:`select-drilldowns-label-table`."
398 msgstr "[:doc:`/reference/commands/select`] :ref:`select-drilldowns-label-table` のドキュメントを追加しました。"
399
400 msgid "[:doc:`/contribution/documentation/i18n`] Updated the translation procedure."
401 msgstr "[:doc:`/contribution/documentation/i18n`] 翻訳方法を更新しました。"
402
403 msgid "Fixed a bug that Groonga could return incorrect results when we use :doc:`/reference/normalizers/normalizer_table` and it contains a non-idempotent (results can be changed when executed repeatedly) definition."
404 msgstr ":doc:`/reference/normalizers/normalizer_table` で冪等でない(繰り返し実行すると結果が変わることがある)定義をした時に、Groongaが誤った結果を返すことがある問題を修正しました。"
405
406 msgid "This was caused by that we normalized a search value multiple times: after the value was input and after the value was tokenized."
407 msgstr "これは、検索する値について、値を受け取った後と、トークナイズした後の二回ノーマライズしていたことが原因です。"
408
409 msgid "Groonga tokenizes and normalizes the data to be registered using the tokenizer and normalizer set in the index table when adding a record. The search value is also tokenized and normalized using the tokenizer and normalizer set in the index table, and then the search value and the index are matched. If the search value is the same as the data registered in the index, it will be in the same state as stored in the index because both use the same tokenizer and normalizer."
410 msgstr "Groongaはレコードを追加する時に、インデックス用のテーブルに設定したトークナイザーとノーマライザーを使って、登録するデータをトークナイズしてからノーマライズしています。検索する値についても、インデックス用のテーブルに設定したトークナイザーとノーマライザーを使って、トークナイズしてからノーマライズして、その後インデックスと照合します。両者は同じトークナイザーとノーマライザーを使うので、検索する値がインデックスに登録したデータと同じであれば、インデックスに格納されている状態と同じ状態になります。"
411
412 msgid "However, Groonga had normalized extra only search keywords."
413 msgstr "しかし、いままでGroongaは検索する値だけを余分にノーマライズしていました。"
414
415 msgid "Built-in normalizers like :doc:`/reference/normalizers/normalizer_auto` did't cause this bug because they are idempotent (results aren't changed if they are executed repeatedly). On the other hand, :doc:`/reference/normalizers/normalizer_table` allows the users specify their own normalization definitions, so they can specify non-idempotent (results can be changed when executed repeatedly) definitions."
416 msgstr ":doc:`/reference/normalizers/normalizer_auto` といった組み込みのノーマライザーは冪等である(繰り返し実行しても結果が変わらない)ため、この問題は発生しません。一方で、 :doc:`/reference/normalizers/normalizer_table` はユーザー自身がノーマライザーの定義をすることができます。そのため、冪等でない(繰り返し実行すると結果が変わることがある)定義をすることができました。"
417
418 msgid "If there were non-idempotent definitions in :doc:`/reference/normalizers/normalizer_table`, the indexed data and the search value did not match in some cases because the search value was normalized extra."
419 msgstr ":doc:`/reference/normalizers/normalizer_table` に冪等でない定義が存在する場合、検索する値のみが余分にノーマライズされることで、インデックスに登録したデータと検索する値が一致しない場合がありました。"
420
421 msgid "In such cases, the data that should hit was not hit or the data that should not hit was hit."
422 msgstr "そのような場合、ヒットするはずのデータがヒットしなかったり、ヒットしないはずのデータがヒットしたりしていました。"
423
424 msgid "Here is a example."
425 msgstr "以下はこの問題の例です。"
426
427 msgid "The expected result of ``select Memos --query content:@a`` is ``a``, but Groonga returned ``c`` as a result. This was because we normalized the input ``a`` to ``b`` by definitions of ``ColumnNormalizations``, and after that, we normalized the normalized ``b`` again and it was normalized to ``c``. As a result, the input ``a`` was converted to ``c`` and matched to ``{\"content\":\"c\"}`` of the ``Memos`` table."
428 msgstr "``select Memos --query content:@a`` の結果の期待値は ``a`` ですが、Groongaは ``c`` を返していました。これは、入力された ``a`` が ``ColumnNormalizations`` の定義にしたがって ``b`` にノーマライズされ、その後、 ノーマライズされた ``b`` を更に ``c`` にノーマライズしていたためです。結果的に、入力された ``a`` は ``c`` に変換され、 ``Memos`` テーブルの ``{\"content\":\"c\"}`` にマッチしていました。"
429
430 msgid "Release 12.0.7 - 2022-08-29"
431 msgstr "12.0.7リリース - 2022-08-29"
432
433 msgid "Added a new function ``escalate()``. (experimental)"
434 msgstr "新しい関数 ``escalate()`` を追加しました。(実験的)"
435
436 msgid "The ``escalate()`` function is similar to the existing match escalation ( :doc:`/spec/search` ). We can use this function for any conditions. (The existing match escalation is just for one full text search by invert index.)"
437 msgstr "``escalate()`` 関数は既存のマッチエスカレーション( :doc:`/spec/search` )と似ています。この関数は、全ての条件で使えます。(既存のマッチエスカレーションは、一つの転置インデックスによる全文検索で使えます。)"
438
439 msgid "The ``escalate()`` function is useful when we want to limit the number of results of a search. Even if we use ``--limit``, we can limit the number of results of a search. However, ``--limit`` is evaluated after evaluating all conditions in our query. The ``escalate()`` function finish the evaluation of conditions at that point when the result set has greater than ``THRESHOLD`` records. In other words, The ``escalate()`` function may reduce the number of evaluating conditions."
440 msgstr "``escalate()`` 関数は検索結果の数を制限したい時に便利です。検索結果の数の制限は、 ``--limit`` でもできますが、 ``--limit`` は全ての条件を評価した後に評価されます。``escalate()`` 関数は結果セットが ``THRESHOLD`` より多くのレコードを持っていたら、その時点で評価を終了します。つまり、 ``escalate()`` 関数は条件の評価の数を減らせる可能性があります。"
441
442 msgid "The syntax of the ``escalate()`` function as below::"
443 msgstr "``escalate()`` の構文は以下の通りです。"
444
445 msgid "``THRESHOLD_N`` is a positive number such as 0 and 29. ``CONDITION_N`` is a string that uses :doc:`/reference/grn_expr/script_syntax` such as ``number_column > 29``."
446 msgstr "``THRESHOLD_N`` は、0や29のような正の数です。 ``CONDITION_N`` は ``number_column > 29`` のような :doc:`/reference/grn_expr/script_syntax` を使った文字列です。"
447
448 msgid "If the current result set has less than or equal to ``THRESHOLD_1`` records, the corresponding ``CONDITION_1`` is executed. Similarly, if the next result set has less than or equal to ``THRESHOLD_2`` records, the corresponding ``CONDITION_2`` is executed. If the next result set has greater than ``THRESHOLD_3`` records, the ``escalate()`` function is finished."
449 msgstr "現在の結果セットのレコード数が ``THRESHOLD_1`` 以下の場合、 ``CONDITION_1`` が実行されます。同様に、 ``CONDITION_1`` 評価後の結果セットのレコード数が ``THRESHOLD_2`` 以下の場合、 ``CONDITION_2`` が実行されます。 ``CONDITION_2`` 評価後の結果セットのレコード数が ``THRESHOLD_3`` より大きい場合、 ``escalate()`` は終了します。"
450
451 msgid "If all ``CONDITION`` s are executed, ``escalate(THRESHOLD_1, CONDITION_1, ..., THRESHOLD_N, CONDITION_N)`` is same as ``CONDITION_1 || ... || CONDITION_N``."
452 msgstr "全ての ``CONDITION`` が実行された場合、 ``escalate(THRESHOLD_1, CONDITION_1, ..., THRESHOLD_N, CONDITION_N)`` は ``CONDITION_1 || ... || CONDITION_N`` と同じです。"
453
454 msgid "The ``escalate()`` function can be worked with logical operators such as ``&&`` and ``&!`` ::"
455 msgstr "``escalate()`` 関数は、 ``&&`` and ``&!`` のような論理演算子と一緒に使えます。::"
456
457 msgid "They are same as ``number_column > 10 && (CONDITION_1 || ... || CONDITION_N)`` and ``number_column > 10 &! (CONDITION_1 || ... || CONDITION_N)`` ."
458 msgstr "これらは、 ``number_column > 10 && (CONDITION_1 || ... || CONDITION_N)`` と ``number_column > 10 &! (CONDITION_1 || ... || CONDITION_N)`` と同じです。"
459
460 msgid "However, these behaviors may be changed because they may not be useful."
461 msgstr "しかし、これらの挙動は使いにくいため変更される可能性があります。"
462
463 msgid "[httpd] Updated bundled nginx to 1.23.1."
464 msgstr "[httpd] バンドルしているnginxのバージョンを1.23.1に更新しました。"
465
466 msgid "[:doc:`/reference/commands/select`] Add a document for the ``--n_workers`` option."
467 msgstr "[:doc:`/reference/commands/select`] ``--n_workers`` オプションのドキュメントを追加しました。"
468
469 msgid "Fixed a bug Groonga's response may be slow when we execute the ``request_cancel`` while executing a OR search."
470 msgstr "OR検索実行中に ``request_cancel`` を実行した場合、Groongaの応答が遅くなることがある問題を修正しました。"
471
472 msgid "When the number of results of the OR search is many and a query has many OR conditions, Groonga may response slow with the \"request_cancel\" command."
473 msgstr "OR検索の結果が多い場合や多くのOR条件をもつクエリー場合に、 \"request_cancel\" コマンドが原因でGroongaのレスポンスが遅くなることがあります。"
474
475 msgid "Release 12.0.6 - 2022-08-04"
476 msgstr "12.0.6リリース - 2022-08-04"
477
478 msgid "Added new Munin plugins for groonga-delta."
479 msgstr "groonga-delta用の新しいMuninプラグインを追加しました。"
480
481 msgid "We can monitoring the following items by plugins for groonga-delta."
482 msgstr "このプラグインによって、以下の項目を監視できます。"
483
484 msgid "Whether ``groonga-delta-import`` can import or not ``.grn`` file on local storage."
485 msgstr "``groonga-delta-import`` がローカルのストレージ上の ``.grn`` ファイルをインポートできているかどうか。"
486
487 msgid "Whether ``groonga-delta-import`` can import or not difference data of MySQL."
488 msgstr "``groonga-delta-import`` がMySQLの差分データをインポートできているかどうか。"
489
490 msgid "Whether ``groonga-delta-apply`` can apply imported data or not."
491 msgstr "``groonga-delta-apply`` がインポートしたデータを適用できているかどうか。"
492
493 msgid "The total size of applying data."
494 msgstr "適用したデータの総サイズ。"
495
496 msgid "[:doc:`/reference/commands/column_copy`] Added support for weight vector."
497 msgstr "[:doc:`/reference/commands/column_copy`] 重み付きベクターをサポートしました。"
498
499 msgid "We can copy the value of weight vector by ``column_copy`` as below."
500 msgstr "以下のように、重み付きベクターの値を ``column_copy`` でコピーできます。"
501
502 msgid "[:doc:`/install/ubuntu`] Dropped support for Ubuntu 21.10 (Impish Indri)."
503 msgstr "[:doc:`/install/ubuntu`] Ubuntu 21.10 (Impish Indri) のサポートをやめました。"
504
505 msgid "Because Ubuntu 21.10 reached EOL in July 2022."
506 msgstr "Ubuntu 21.10 は、2022年7月でEOLとなったためです。"
507
508 msgid "[:doc:`/install/debian`] Dropped Debian 10 (buster) support."
509 msgstr "[:doc:`/install/debian`] Debian 10 (buster) のサポートをやめました。"
510
511 msgid "Because Debian 10 reaches EOL in August 2022."
512 msgstr "Debian 10 は、2022年8月でEOLとなるためです。"
513
514 msgid "Fixed a bug that Groonga may crash when we execute drilldown in a parallel by ``n_workers`` option."
515 msgstr "``n_workers`` オプションを使ってドリルダウンを並行して実行したときにGroongaがクラッシュすることがある問題を修正しました。"
516
517 msgid "[:doc:`/reference/commands/select`] Fixed a bug that the syntax error occurred when we specify a very long expression in ``--filter``."
518 msgstr "[:doc:`/reference/commands/select`] ``--filter`` に非常に長い式を指定するとシンタックスエラーになる問題を修正しました。"
519
520 msgid "Because the max stack size for the expression of ``--filter`` was 100 until now."
521 msgstr "今まで ``--filter`` 用のスタックサイズを100にしていたため発生していました。"
522
523 msgid "Release 12.0.5 - 2022-06-29"
524 msgstr "12.0.5リリース - 2022-06-29"
525
526 msgid "[:doc:`/reference/commands/select`] Improved a little bit of performance for prefix search by search escalation."
527 msgstr "[:doc:`/reference/commands/select`] 検索エスカレーションによる前方一致検索のパフォーマンスを少し改善しました。"
528
529 msgid "[:doc:`/reference/commands/select`] Added support for specifying a reference vector column with weight in ``drilldowns[LABEL]._key``. [GitHub#1366][Patched by naoa]"
530 msgstr "[:doc:`/reference/commands/select`] ``drilldowns[LABEL]._key`` に重み付き参照ベクターカラムを指定できるようになりました。 [GitHub#1366][naoaさんがパッチ提供]"
531
532 msgid "If we specified a reference vector column with weight in drilldown's key, Groonga had returned incorrect results until now."
533 msgstr "今までは、ドリルダウンのキーに重み付き参照ベクターカラムを指定すると、Groongaが誤った結果を返していました。"
534
535 msgid "For example, the following tag search had returned incorrect results until now."
536 msgstr "例えば、以下のタグ検索は、今まで誤った結果を返していました。"
537
538 msgid "The above query returns correct results as below since this release."
539 msgstr "今回のリリースから上記のクエリーは、以下のように正しい結果を返します。"
540
541 msgid "[:doc:`/reference/commands/select`] Added support for doing drilldown with a reference vector with weight even if we use ``query`` or ``filter``, or ``post_filter``. [GitHub#1367][Patched by naoa]"
542 msgstr "[:doc:`/reference/commands/select`] ``query`` や ``filter`` や ``post_filter`` を使っていても、ドリルダウンのキーに重み付き参照ベクターカラムを指定できるようになりました。 [GitHub#1367][naoaさんがパッチ提供]"
543
544 msgid "If we specified a reference vector column with weight in drilldown's key when we use ``query`` or ``filter``, or ``post_filter``, Groonga had returned incorrect results or errors until now."
545 msgstr "今までは、 ``query`` や ``filter`` や ``post_filter`` を使っているときに、ドリルダウンのキーに重み付き参照ベクターカラムを指定するとGroongaは誤った結果、またはエラーを返していました。"
546
547 msgid "For example, the following query had been erred until now."
548 msgstr "例えば、今まで以下のクエリーはエラーを返していました。"
549
550 msgid "Known Issues"
551 msgstr "既知の問題"
552
553 msgid "Currently, Groonga has a bug that there is possible that data is corrupt when we execute many additions, delete, and update data to vector column."
554 msgstr "現在Groongaには、ベクターカラムに対してデータを大量に追加、削除、更新した際にデータが破損することがある問題があります。"
555
556 msgid "``*<`` and ``*>`` only valid when we use ``query()`` the right side of filter condition. If we specify as below, ``*<`` and ``*>`` work as ``&&``."
557 msgstr "``*<`` と ``*>`` は、filter条件の右辺に ``query()`` を使う時のみ有効です。もし、以下のように指定した場合、 ``*<`` と ``*>`` は ``&&`` として機能します。"
558
559 msgid "``'content @ \"Groonga\" *< content @ \"Mroonga\"'``"
560 msgstr ""
561
562 msgid "Groonga may not return records that should match caused by ``GRN_II_CURSOR_SET_MIN_ENABLE``."
563 msgstr "``GRN_II_CURSOR_SET_MIN_ENABLE`` が原因でマッチするはずのレコードを返さないことがあります。"
564
565 msgid "naoa"
566 msgstr "naoaさん"
567
568 msgid "Release 12.0.4 - 2022-06-06"
569 msgstr "12.0.4リリース - 2022-06-06"
570
571 msgid "[:doc:`/install/ubuntu`] Added support for Ubuntu 22.04 (Jammy Jellyfish)."
572 msgstr "[:doc:`/install/ubuntu`] Ubuntu 22.04 (Jammy Jellyfish)をサポートしました。"
573
574 msgid "We don't provide `groonga-benchmark`."
575 msgstr "`groonga-benchmark` の提供をやめました。"
576
577 msgid "Because nobody will not use it and we can't maintain it."
578 msgstr "誰も使用しておらず、メンテナンスもできないためです。"
579
580 msgid "[:doc:`/reference/commands/status`] Added a new item ``memory_map_size``."
581 msgstr "[:doc:`/reference/commands/status`] 新しい項目 ``memory_map_size`` を追加しました。"
582
583 msgid "We can get the total memory map size in bytes of Groonga with ``status`` command."
584 msgstr "``status`` コマンドを使うことで、Groongaのメモリーマップサイズの合計を取得できます。"
585
586 msgid "For example, in Windows, if Groonga uses up physical memory and swap area, Groonga can't more mapping memory than that. Therefore, we can control properly memory map size by monitoring this value even if the environment does have not enough memory."
587 msgstr "例えば、Windowsでは、Mroogaが物理メモリーとスワップ領域を使い果たした場合、それ以上メモリーをマップすることができません。そのため、この値を監視することで、メモリーが十分でない環境でもメモリーマップサイズを適切にコントロールできます。"
588
589 msgid "Fixed a bug Groonga's response may be slow when we execute ``request_cancel`` while executing a search."
590 msgstr "検索実行中に ``request_cancel`` を実行した時Groongaの応答が遅くなることがある問題を修正しました。"
591
592 msgid "Especially, when the number of records of the search target is many, Groonga's response may be very slow."
593 msgstr "特に、検索対象のレコード数が多い時に、Groongaの応答がとても遅くなることがあります。"
594
595 msgid "Fixed a bug that string list can't be casted to int32 vector."
596 msgstr "文字列リストをint32のベクターにキャストできない問題を修正しました。"
597
598 msgid "For example, the following cast had failed."
599 msgstr "例えば、以下のキャストは失敗していました。"
600
601 msgid "[\"10\", \"100\"] -> [10, 100]"
602 msgstr ""
603
604 msgid "This bug only occurs when we specify ``apache-arrow`` into ``input_type`` as the argument of ``load``. This bug occurs in Groonga 12.0.2 or later."
605 msgstr "この問題は、 ``load`` の引数として、 ``input_type`` に ``apache-arrow`` を指定したときのみ発生します。 この問題は、Groonga 12.0.2以降で発生します。"
606
607 msgid "Fixed a bug that Groonga Munin Plugins do not work on AlmaLinux 8 and CentOS 7."
608 msgstr "GroongaのMuninプラグインがAlmaLinux 8 とCentOS 7上で動作しない問題を修正しました。"
609
610 msgid "Release 12.0.3 - 2022-04-29"
611 msgstr "12.0.3リリース - 2022-04-29"
612
613 msgid "[:doc:`/reference/commands/logical_count`] Improved memory usage while ``logical_count`` executed."
614 msgstr "[:doc:`/reference/commands/logical_count`] ``logical_count`` 実行中のメモリー使用量を改善しました。"
615
616 msgid "Up to now, Groonga had been keeping objects(objects are tables and columns and indexes, and so on) and temporary tables that were allocated while ``logical_count`` executed until the execution of ``logical_count`` finished."
617 msgstr "いままで、Groongaは ``logical_count`` 実行中に確保したオブジェクト(オブジェクトとは、テーブルやカラム、インデックスなどです。)と一時テーブルを ``logical_count`` の実行完了まで保持し続けていました。"
618
619 msgid "Groonga reduces reference immediately after processing a shard by this feature. Therefore, Groonga can release memory while ``logical_count`` executed. The usage of memory of Groonga may reduce because of these reasons."
620 msgstr "この機能によって、Groongaは、1つのシャードを処理した後すぐに参照を減らします。そのため、Groongaは、 ``logical_count`` の実行中にメモリーを解放できるようになり、Groongaのメモリー使用量を削減できることがあります。"
621
622 msgid "This improvement is only valid for the reference count mode. We can valid the reference count mode by setting ``GRN_ENABLE_REFERENCE_COUNT=yes``."
623 msgstr "この機能は参照カウントモードのときのみ有効です。``GRN_ENABLE_REFERENCE_COUNT=yes`` と設定することで、参照カウントモードを有効にできます。"
624
625 msgid "In addition, Groonga releases temporary tables dynamically while ``logical_count`` is executed by this feature. Therefore, the usage of memory of Groonga reduces. This improvement is valid even if we don't set the reference count mode."
626 msgstr "加えて、Groongaは、この機能によって ``logical_count`` 実行中に一時テーブルを動的に解放します。そのため、Groongaのメモリー使用量を削減できます。この改善は、参照カウントモードが有効でなくても効果があります。"
627
628 msgid "[:doc:`/reference/commands/dump`] Added support for ``MISSING_IGNORE/MISSING_NIL``."
629 msgstr "[:doc:`/reference/commands/dump`] ``MISSING_IGNORE/MISSING_NIL`` をサポートしました。"
630
631 msgid "If columns had ``MISSING_IGNORE/MISSING_NIL``, the dump of these columns had failed until now. ``dump`` command supports these columns since this release."
632 msgstr "``MISSING_IGNORE/MISSING_NIL`` を持つカラムがある場合、これらのカラムのダンプに失敗していました。このリリースから、 ``dump`` コマンドはこれらのカラムをサポートしました。"
633
634 msgid "[:doc:`/reference/functions/snippet`],[:doc:`/reference/functions/snippet_html`] Added support for text vector as input. [groonga-dev,04956][Reported by shinonon]"
635 msgstr "[:doc:`/reference/functions/snippet`],[:doc:`/reference/functions/snippet_html`] 入力としてベクターをサポートしました。[groonga-dev,04956][Reported by shinonon]"
636
637 msgid "For example, we can extract snippets of target text around search keywords against vector in JSON data as below."
638 msgstr "例えば、以下のようにJSONデータ内のベクターに対して検索キーワードの周辺テキストを抽出できます。"
639
640 msgid "Until now, if we specified ``snippet*`` like ``--output_columns 'snippet_html(contents[1])``, we could extract snippets of target text around search keywords against the vector as below. However, we didn't know which we should output elements. Because we didn't know which element was hit on search."
641 msgstr "今までも、 ``--output_columns 'snippet_html(contents[1])'`` のように ``snippet*`` を指定することで以下のようにベクターに対して検索キーワードの周辺テキストを抽出できますが、この方法ではどの要素を出力すればよいかわかりません。どの要素が検索にヒットしたかわからないためです。"
642
643 msgid "[``vector_join``] Added a new function ``vector_join()``.[groonga-dev,04956][Reported by shinonon]"
644 msgstr "[``vector_join``] 新しい関数 ``vector_join()`` を追加しました。 [groonga-dev,04956][shinononさんの報告]"
645
646 msgid "This function can concatenate each elements. We can specify delimiter in the second argument in this function."
647 msgstr "この関数は各要素を結合します。この関数の第二引数で区切り文字を指定できます。"
648
649 msgid "For example, we could execute ``snippet()`` and ``snippet_html()`` against vector that concatenate each elements as below."
650 msgstr "例えば、以下のようにベクターに対して ``snippet()`` や ``snippet_html()`` を実行できます。"
651
652 msgid "[:doc:`/reference/indexing`] Ignore too large a token like online index construction. [GitHub:pgroonga/pgroonga#209][Reported by Zhanzhao (Deo) Liang]"
653 msgstr "[:doc:`/reference/indexing`] 動的インデックス構築のようにとても大きなトークンを無視するようにしました。 [GitHub:pgroonga/pgroonga#209][Zhanzhao (Deo) Liangさんの報告]"
654
655 msgid "Groonga doesn't occur error, but Groonga ignores too large a token when we execute static index construction. However, Groonga output warning in this case."
656 msgstr "Groongaはエラーを発生しなくなり、静的インデックス構築を実行する時に大きなトークンを無視し警告を出力します。"
657
658 msgid "Fixed a bug that we may be not able to add a key to a table of patricia trie."
659 msgstr "パトリシアトライのテーブルにキーを追加できなくなることがある問題を修正しました。"
660
661 msgid "This bug occurs in the following conditon."
662 msgstr "この問題は、以下の条件で発生します。"
663
664 msgid "If a table of patricia trie already has a key."
665 msgstr "パトリシアトライのテーブルにすでにキーがある場合。"
666
667 msgid "If the additional key is 4096 bytes."
668 msgstr "4096バイトのキーを追加する場合。"
669
670 msgid "shinonon"
671 msgstr "shinononさん"
672
673 msgid "Zhanzhao (Deo) Liang"
674 msgstr "Zhanzhao (Deo) Liangさん"
675
676 msgid "Release 12.0.2 - 2022-03-29"
677 msgstr "12.0.2リリース - 2022-03-29"
678
679 msgid "[:doc:`/reference/commands/logical_range_filter`] Added support for reducing reference immediately after processing a shard."
680 msgstr "[:doc:`/reference/commands/logical_range_filter`] シャードを処理した直後に参照を減らすようにしました。"
681
682 msgid "Groonga had reduced reference all shards when the finish of ``logical_range_filter`` until now. Groonga reduces reference immediately after processing a shard by this feature. The usage of memory may reduce while ``logical_range_filter`` executes by this feature."
683 msgstr "今までGroongaは、 ``logical_range_filter`` 終了時にすべてのシャードの参照を減らしていました。この機能によって、Groongaは、シャードを処理した後すぐに参照を減らします。この機能によって、 ``logical_range_filter`` 実行中のメモリー使用量を削減できることがあります。"
684
685 msgid "This feature is only valid for the reference count mode. We can valid the reference count mode by setting ``GRN_ENABLE_REFERENCE_COUNT=yes``."
686 msgstr "この機能は参照カウントモードのときのみ有効です。``GRN_ENABLE_REFERENCE_COUNT=yes`` と設定することで、参照カウントモードを有効にできます。"
687
688 msgid "Normally, Groonga keep objects(tables and column and index, and so on) that Groonga opened even once on memory. However, if we open many objects, Groonga uses much memory. In the reference count mode release objects that are not referenced anywhere from memory. The usage of memory of Groonga may reduce by this."
689 msgstr "通常、Groongaは一度でも開いたオブジェクト(テーブル、カラム、インデックスなど)をメモリ上に保持し続けますが、たくさんのオブジェクトを開いた場合、Groongaはたくさんのメモリーを使用します。参照カウントモードでは、どこからも参照されてないオブジェクトをメモリーから開放します。これにより、Groongaのメモリー使用量が減ることがあります。"
690
691 msgid "We increased the stability of the feature of recovering on crashes."
692 msgstr "クラッシュリカバリー機能の安定性が向上しました。"
693
694 msgid "This feature is experimental and it is disabled by default. Therefore, the following improvements are no influence on ordinary users."
695 msgstr "この機能は実験的で、デフォルトで無効です。したがって、以下の改良は。一般的なユーザーには影響ありません。"
696
697 msgid "We fixed a bug that the index was broken when Groonga crashed."
698 msgstr "Groongaがクラッシュしたときにインデックスが破損する問題を修正しました。"
699
700 msgid "We fixed a bug that might remain a lock."
701 msgstr "ロックが残留する問題を修正しました。"
702
703 msgid "We fixed a bug that Groonga crashed while it was recovering the crash."
704 msgstr "クラッシュリカバリー中にGroongaがクラッシュする問題を修正しました。"
705
706 msgid "Improved performance for mmap if anonymous mmap available.[GitHub:MariaDB/server#1999][Suggested by David CARLIER]"
707 msgstr "無名マッピングが利用可能な時のmmapのパフォーマンスを向上しました。[GitHub:MariaDB/server#1999][David CARLIERさんの提案]"
708
709 msgid "The performance of Groonga is improved a bit by this improvement."
710 msgstr "この改善によって、Groongaのパフォーマンスが少し向上します。"
711
712 msgid "[:doc:`/reference/indexing`] Added support for the static index construction against the following types of columns."
713 msgstr "[:doc:`/reference/indexing`] 以下のタイプのカラムで静的インデックス構築をサポートしました。"
714
715 msgid "The non-reference vector column with weight"
716 msgstr "非参照重み付きベクターカラム"
717
718 msgid "The reference vector column with weight"
719 msgstr "参照重み付きベクターカラム"
720
721 msgid "The reference scalar column"
722 msgstr "参照スカラーカラム"
723
724 msgid "These columns have not supported the static index construction until now. Therefore, the time of making the index has longed even if we set the index against these columns after we loaded data into them. By this improvement, the time of making the index is short in this case."
725 msgstr "これらのカラムは、いままで、静的インデックス構築をサポートしていませんでした。そのため、これらのカラムにデータをロードしたあとに、インデックスを構築しても、インデックスの構築時間が長くなっていました。この改良によって、このケースでインデックス構築時間が短くなります。"
726
727 msgid "[:doc:`/reference/commands/column_create`] Added new flags ``MISSING_*`` and ``INVALID_*``."
728 msgstr "[:doc:`/reference/commands/column_create`] 新しいフラグ ``MISSING_*`` と ``INVALID_*`` を追加しました。"
729
730 msgid "We added the following new flags for ``column_create``."
731 msgstr "``column_create`` に以下の新しいフラグを追加しました。"
732
733 msgid "``MISSING_ADD``"
734 msgstr ""
735
736 msgid "``MISSING_IGNORE``"
737 msgstr ""
738
739 msgid "``MISSING_NIL``"
740 msgstr ""
741
742 msgid "``INVALID_ERROR``"
743 msgstr ""
744
745 msgid "``INVALID_WARN``"
746 msgstr ""
747
748 msgid "``INVALID_IGNORE``"
749 msgstr ""
750
751 msgid "Normally, if the data column is a reference data column and the nonexistent key is specified, a new record for the nonexistent key is newly created automatically."
752 msgstr "通常、データカラムが参照データカラムで存在しないキーを指定された場合、自動的に存在しないキーを作成し、新しいレコードを作ります。"
753
754 msgid "The behavior that Groonga adds the key automatically into the column of reference destination is useful in the search like tag search. Because Groonga adds data automatically when we load data."
755 msgstr "このGroongaが参照先のカラムにキーを自動的に追加する挙動は、タグ検索のような検索で便利です。Groongaがロード時に自動的にデータを追加してくれるためです。"
756
757 msgid "However, this behavior is inconvenient if we need the other data except for the key. Because a record that only has the key exists."
758 msgstr "しかしながら、この挙動は、キー以外の値が必要な場合に不便です。キーしか存在しないレコードがあるためです。"
759
760 msgid "We can change this behavior by using flags that are added in this release."
761 msgstr "このリリースで追加したフラグを使ってこの挙動を変更できます。"
762
763 msgid "``MISSING_ADD``: This is the default value. This is the same behavior as the current."
764 msgstr "``MISSING_ADD``: デフォルト値です。現在と同じ挙動になります。 "
765
766 msgid "If the data column is a reference data column and the nonexistent key is specified, a new record for the nonexistent key is newly created automatically."
767 msgstr "データカラムが参照データカラムで、存在しないキーを指定された場合、自動的にキーを作成し、新しいレコードを追加します。"
768
769 msgid "``MISSING_IGNORE``:"
770 msgstr ""
771
772 msgid "If the data column is a reference data column and the nonexistent key is specified, the nonexistent key is ignored. If the reference data column is a scalar column, the value is ``GRN_ID_NIL``. If the reference data column is a vector column, the element is just ignored as below ::"
773 msgstr "データカラムが参照データカラムで、存在しないキーを指定された場合、存在しないキーを無視します。参照データカラムがスカラーカラムの場合、値は ``GRN_ID_NIL`` になります。参照データカラムがベクターカラムの場合、以下のようにその要素のみを無視します。 ::"
774
775 msgid "``MISSING_NIL``:"
776 msgstr ""
777
778 msgid "If the data column is a reference data column and the nonexistent key is specified, the nonexistent key in a scalar column and a vector column is treated as ``GRN_ID_NIL`` ::"
779 msgstr "データカラムが参照データカラムで、存在しないキーを指定された場合、スカラーカラムとベクターカラムは存在しないキーを``GRN_ID_NIL`` として扱います。 ::"
780
781 msgid "``INVALID_ERROR``: This is the default value. This is the same behavior as the current except an error response of a vector column case."
782 msgstr "``INVALID_ERROR``: デフォルト値です。 ベクターカラムのエラー応答を除いて、現在と同じ挙動になります。"
783
784 msgid "If we set the invalid value (e.g.: ``XXX`` for ``UInt8`` scalar column), the set operation is treated as an error. If the data column is a scalar column, ``load`` reports an error in log and response. If the data column is a vector column, ``load`` reports an error in log but doesn't report an error in response. This is an incompatible change."
785 msgstr "無効な値を設定した場合(e.g.: ``XXX`` for ``UInt8`` scalar column)、設定操作をエラーとして扱います。データカラムがスカラーカラムの場合、 ``load`` は応答とログにエラーを報告します。データカラムがベクターカラムの場合、 ``load`` はログにエラーを報告しますが、応答にエラーを報告しません。これは非互換の変更です。"
786
787 msgid "``INVALID_WARN``:"
788 msgstr ""
789
790 msgid "If we set the invalid value (e.g.: ``XXX`` for ``UInt8`` scalar column), a warning message is logged and the set operation is ignored. If the target data column is a reference vector data column, ``MISSING_IGNORE`` and ``MISSING_NIL`` are used to determine the behavior."
791 msgstr "無効な値を設定した場合(e.g.: ``XXX`` for ``UInt8`` scalar column)、警告メッセージをログに記録し、設定操作を無視します。対象のデータカラムが参照ベクターカラムの場合、``MISSING_IGNORE`` と ``MISSING_NIL`` を使って挙動を決定します。"
792
793 msgid "``INVALID_IGNORE``:"
794 msgstr ""
795
796 msgid "If we set the invalid value (e.g.: ``XXX`` for ``UInt8`` scalar column), the set operation is ignored. If the target data column is a reference vector data column, ``MISSING_IGNORE`` and ``MISSING_NIL`` are used to determine the behavior."
797 msgstr "無効な値を設定した場合(e.g.: ``XXX`` for ``UInt8`` scalar column)、設定操作を無視します。対象のデータカラムが参照ベクターカラムの場合、``MISSING_IGNORE`` と ``MISSING_NIL`` を使って挙動を決定します。"
798
799 msgid "[:doc:`/reference/commands/dump`][:doc:`/reference/commands/column_list`] Added support for ``MISSING_*`` and ``INVALID_*`` flags."
800 msgstr "[:doc:`/reference/commands/dump`][:doc:`/reference/commands/column_list`] ``MISSING_*`` と ``INVALID_*`` フラグをサポートしました。"
801
802 msgid "These commands doesn't show ``MISSING_ADD`` and ``INVALID_ERROR`` flags to keep backward compatibility. Because these flags show the default behavior."
803 msgstr "これらのコマンドは、後方互換性を維持するため、 ``MISSING_ADD`` と ``INVALID_ERROR`` フラグを表示しません。これらのフラグはデフォルトの挙動を表すためです。"
804
805 msgid "[:doc:`/reference/commands/schema`] Added support for ``MISSING_*`` and ``INVALID_*`` flags."
806 msgstr "[:doc:`/reference/commands/schema`] ``MISSING_*`` と ``INVALID_*`` フラグをサポートしました。"
807
808 msgid "``MISSING_AND`` and ``INVALID_ERROR`` flags aren't shown in ``flags`` to keep backward compatibility. However, new ``missing`` and ``invalid`` keys are added to each column."
809 msgstr "後方互換性を維持するため、 ``MISSING_AND`` と ``INVALID_ERROR`` フラグを ``flag`` に表示しませんがそれぞれのカラムに、新しく ``missing`` と ``invalid`` キーが追加されます。"
810
811 msgid "We provided the package of Amazon Linux 2."
812 msgstr "Amazon Linux 2向けのパッケージを提供するようにしました。"
813
814 msgid "[Windows] Dropped support for building with Visual Studio 2017."
815 msgstr "[Windows] Visual Studio 2017 でのビルドをやめました。"
816
817 msgid "Because we could not use windows-2016 image on GitHub Actions."
818 msgstr "GitHub Actionsで windows-2016 のイメージが使えなくなったためです。"
819
820 msgid "David CARLIER"
821 msgstr "David CARLIERさん"
822
823 msgid "Release 12.0.1 - 2022-02-28"
824 msgstr "12.0.1リリース - 2022-02-28"
825
826 msgid "[:doc:`/reference/commands/query_expand`] Added a support for synonym group."
827 msgstr "[:doc:`/reference/commands/query_expand`] 同義語グループをサポートしました。"
828
829 msgid "Until now, We had to each defined a keyword and synonyms of the keyword as below when we use the synonym search."
830 msgstr "同義語検索をする場合、今までは、以下のようにキーワードとその同義語をそれぞれ定義していました。"
831
832 msgid "In the above case, if we search ``mroonga``, Groonga search ``mroonga OR tritonn OR \"groonga mysql\"`` as we intended. However, if we search ``tritonn``, Groonga search only ``tritonn``. If we want to search ``tritonn OR mroonga OR \"groonga mysql\"`` even if we search ``tritonn``, we need had added a definition as below."
833 msgstr "上記のケースでは、``mroonga`` を検索した場合、 Groongaは、意図通り、 ``mroonga OR tritonn OR \"groonga mysql\" を検索しますが、``tritonn`` を検索した場合は、 Groongaは、 ``tritonn`` のみを検索します。``tritonn`` を検索した場合でも、``tritonn OR mroonga OR \"groonga mysql\"`` と検索した場合、以下のように定義を追加する必要がありました。"
834
835 msgid "In many cases, if we expand ``mroonga`` to ``mroonga OR tritonn OR \"groonga mysql\"``, we feel we want to expand ``tritonn`` and ``\"groonga mysql\"`` to ``mroonga OR tritonn OR \"groonga mysql\"``. However, until now, we had needed additional definitions in such a case. Therefore, if target keywords for synonyms are many, we are troublesome to define synonyms. Because we need to define many similar definitions."
836 msgstr "多くのケースでは、 ``mroonga`` を ``mroonga OR tritonn OR \"groonga mysql\"`` と展開した場合、 ``tritonn`` や ``\"groonga mysql\"`` も ``mroonga OR tritonn OR \"groonga mysql\"`` と展開して欲しくなりますが、今までは、そのようなケースでは定義を追加する必要がありました。したがって、対象のキーワードに同義語がたくさんあると、同じような定義をたくさん定義する必要があるため、同義語の定義が煩雑でした。"
837
838 msgid "In addition, when we remove synonyms, we are troublesome because we need to execute remove against many records."
839 msgstr "加えて、同義語を削除する際も、多くのレコードを削除する必要があるので面倒でした。"
840
841 msgid "We can make a group by deciding on a representative synonym record since this release. For example, the all following keywords are the \"mroonga\" group."
842 msgstr "今回のリリースから同義語の代表値を決めることで一つのグループを作れるようになりました。例えば、以下のすべてのキーワードは、 \"mroonga\" グループです。"
843
844 msgid "In this case, ``mroonga`` is expanded to ``mroonga OR tritonn OR \"groonga mysql\"``. In addition, ``tritonn`` and ``\"groonga mysql\"`` are also expanded to ``mroonga OR tritonn OR \"groonga mysql\"``."
845 msgstr "このケースでは、 ``mroonga`` は ``mroonga OR tritonn OR \"groonga mysql\"`` と展開されます。また、 ``tritonn`` や ``\"groonga mysql\"`` も ``mroonga OR tritonn OR \"groonga mysql\"`` と展開されます。"
846
847 msgid "When we want to remove synonyms, we execute just remove against a target record. For example, if we want to remove ``\"groonga mysql\"`` from synonyms, we just remove ``{\"_key\": \"groonga mysql\": \"representative\": \"mroonga\"}``."
848 msgstr "同義語を削除する際も、対象のレコードを削除するだけです。例えば、同義語から ``\"groonga mysql\"`` を削除する場合は、 ``{\"_key\": \"groonga mysql\": \"representative\": \"mroonga\"}`` を削除するだけです。"
849
850 msgid "[:doc:`/reference/commands/query_expand`] Added a support for text vector and index."
851 msgstr "[:doc:`/reference/commands/query_expand`] 同義語グループにベクターを使えるようにしました。"
852
853 msgid "We can use text vector in a synonym group as below."
854 msgstr "以下のように、同義語グループにベクターを使えます。"
855
856 msgid "Added support for disabling a backtrace by the environment variable."
857 msgstr "環境変数によって、バックトレースを無効にできるようにしました。"
858
859 msgid "We can disable output a backtrace by using ``GRN_BACK_TRACE_ENABLE``. If we set ``GRN_BACK_TRACE_ENABLE=no``, Groonga doesn't output a backtrace."
860 msgstr "``GRN_BACK_TRACE_ENABLE`` を使うことで、バックトレースの出力を無効にできます。``GRN_BACK_TRACE_ENABLE=no`` と設定すると、Groongaはバックトレースを出力しません。"
861
862 msgid "Groonga output backtrace to a stack area. Therefore, Groonga may crash because Groonga uses up stack area depending on the OS. In such cases, we can avoid crashes by using ``GRN_BACK_TRACE_ENABLE=no``."
863 msgstr "Groongaはバックトレースをスタック領域に保持します。したがって、OSによっては、Groongaがスタック領域を使い切ってしまいクラッシュする可能性があります。``GRN_BACK_TRACE_ENABLE=no`` を使うことで、このようなケースを避けることができます。"
864
865 msgid "[:doc:`/reference/commands/select`] Improved performance for ``--slices``."
866 msgstr "[:doc:`/reference/commands/select`] ``--slices`` のパフォーマンスを改善しました。"
867
868 msgid "[Windows] Added support for Visual Studio 2022."
869 msgstr "[Windows] VisualStudio 2022 をサポートしました。"
870
871 msgid "[:doc:`/reference/commands/select`] Added support for specifing max intervals for each elements in near search."
872 msgstr "[:doc:`/reference/commands/select`] 近傍検索でそれぞれの要素ごとの距離を指定できるようになりました。"
873
874 msgid "For example, we can specify max intervals for each phrase in a near phrase search. We make documentation for this feature in the future. Therefore, we will make more details later."
875 msgstr "例えば、近傍フレーズ検索なら、フレーズごとに最大距離を指定できます。この機能は今後ドキュメント化されます。そのため、機能の詳細は後日、共有します。"
876
877 msgid "[:doc:`/reference/executables/groonga-server-http`] We could use ``groonga-server-http`` even if Groonga of RPM packages."
878 msgstr "[:doc:`/reference/executables/groonga-server-http`] RPMパッケージのGroongaであっても、 ``groonga-server-http`` を使えるようにしました。"
879
880 msgid "[Windows] Fixed a crash bug when Groonga output backtrace."
881 msgstr "[Windows] Groongaがバックトレースを出力時にクラッシュする問題を修正しました。"
882
883 msgid "Release 12.0.0 - 2022-02-09"
884 msgstr "12.0.0リリース - 2022-02-09"
885
886 msgid "This is a major version up! But It keeps backward compatibility. We can upgrade to 12.0.0 without rebuilding database."
887 msgstr "メジャーバージョンアップです! メジャーバージョンアップですが、互換性は壊れていないので、データベースを再構築することなく12.0.0へアップグレードできます。"
888
889 msgid "First of all, we introduce the Summary of changes from Groonga 11.0.0 to 11.1.3. Then, we introduce the main changes in 12.0.0."
890 msgstr "まずはじめに Groonga 11.0.0 から 11.1.3 までの変更点を紹介します。次に、12.0.0の主な変更点を紹介します。"
891
892 msgid "Summary of changes from Groonga 11.0.0 to 11.1.3"
893 msgstr "Groonga 11.0.0 から 11.1.3 までの主な変更点"
894
895 msgid "New Features and Improvements"
896 msgstr "新規機能と改良"
897
898 msgid "[:doc:`/reference/functions/snippet`] Added support for using the keyword of 32 or more."
899 msgstr "[:doc:`/reference/functions/snippet`] 32個以上のキーワードを使えるようにしました。"
900
901 msgid "We could not specify the keyword of 32 or more with snippet until now. However, we can specify the keyword of 32 or more by this improvement."
902 msgstr "いままで、 ``snippet`` は32個以上のキーワードを指定できませんでしたが、この改良によって、32個以上のキーワードを指定できます。"
903
904 msgid "We don't specify the keyword of 32 or more with snippet in normal use. However, if the keyword increments automatically by using such as ``query_expand``, the number of target keywords may be 32 or more."
905 msgstr "通常の使用では、 ``snippet`` に32以上のキーワードは指定しませんが、 ``query_expand`` などを使うことによって自動的にキーワードが増加したときに対象のキーワードが32以上になることがあります。"
906
907 msgid "In this case, Groonga occurs an error until now. However, Groonga doesn't occur an error by this improvement."
908 msgstr "今までは、このようなケースでは、Groongaはエラーになっていましたが、この改良によって、エラーが発生しなくなります。"
909
910 msgid "See :ref:`release 11.1.3 <release-11-1-3>` for details."
911 msgstr "詳細は、 :ref:`release 11.1.3 <release-11-1-3>` を参照してください。"
912
913 msgid "[:doc:`/reference/normalizers/normalizer_nfkc130`] Added a new option ``remove_symbol``."
914 msgstr "[:doc:`/reference/normalizers/normalizer_nfkc130`] 新しいオプション ``remove_symbol`` を追加しました。"
915
916 msgid "This option removes symbols (e.g. #, !, “, &, %, …) from the string that the target of normalizing. For example, this option useful when we prevent orthographical variants such as a title of song and name of artist, and a name of store."
917 msgstr "このオプションは、正規化対象の文字列から記号(例えば #, !, \", &, % 等)を削除します。例えば、歌のタイトルやアーティスト名、お店の名前等の表記ゆれの防止に使えます。"
918
919 msgid "[:doc:`/reference/commands/load`] Added support for ISO 8601 time format."
920 msgstr "[:doc:`/reference/commands/load`] ISO 8601 形式をサポートしました。"
921
922 msgid "ISO 8601 format is the format generally. Therefore ``load`` becomes easy to use by Groonga support the more standard format."
923 msgstr "ISO 8601形式は一般的なフォーマットです。より一般的な形式をサポートしたことによって ``load`` の使い勝手が良くなりました。"
924
925 msgid "See :ref:`release 11.1.0 <release-11-1-0>` for details."
926 msgstr "詳細は、 :ref:`release 11.1.0 <release-11-1-0>` を参照してください。"
927
928 msgid "[:doc:`/reference/functions/snippet`] Added a new option ``delimiter_regexp`` for detecting snippet delimiter with regular expression."
929 msgstr "[:doc:`/reference/functions/snippet`] 正規表現を使ってスニペットの区切り文字を見つける新しいオプション ``delimiter_regexp`` を追加しました。"
930
931 msgid "This feature is useful in that we want to show by the sentence the result of the search."
932 msgstr "この機能は検索結果を文で表示したい時に便利です。"
933
934 msgid ":doc:`/reference/functions/snippet` extracts text around search keywords. We call the text that is extracted by :doc:`/reference/functions/snippet` snippet."
935 msgstr ":doc:`/reference/functions/snippet` は、検索キーワードの周辺のテキストを抽出します。 :doc:`/reference/functions/snippet` で抽出したテキストをスニペットと呼びます。"
936
937 msgid "Normally, :doc:`/reference/functions/snippet` () returns the text of 200 bytes around search keywords. However, :doc:`/reference/functions/snippet` () gives no thought to a delimiter of sentences. The snippet may be composed of multi sentences."
938 msgstr "通常、 :doc:`/reference/functions/snippet` は、検索キーワードの周辺の200byteのテキストを返しますが、 :doc:`/reference/functions/snippet` は、センテンスの区切りを考慮しません。スニペットは、複数のセンテンスで構成されることがあります。"
939
940 msgid "``delimiter_regexp`` option is useful if we want to only extract the text of the same sentence as search keywords. For example, we can use ``\\.\\s*`` to extract only text in the target sentence. Note that you need to escape ``\\`` in string."
941 msgstr "``delimiter_regexp`` オプションは、検索キーワードと同じセンテンスのテキストのみを抽出したいときに便利です。例えば、 ``\\.\\s*`` を使って対象のセンテンス内のテキストのみを抽出できます。文字列は、 ``\\`` でエスケープする必要があることに注意してください。"
942
943 msgid "See :ref:`release 11.0.9 <release-11-0-9>` for details."
944 msgstr "詳細は、 :ref:`release 11.0.9 <release-11-0-9>` を参照してください。"
945
946 msgid "[:doc:`/reference/commands/cache_limit`] Groonga remove query cache when we execute ``cache_limit 0``."
947 msgstr "[:doc:`/reference/commands/cache_limit`] ``cache_limit 0`` を実行したときにクエリーキャッシュを削除するようにしました。"
948
949 msgid "Groonga stores query cache to internally table. The maximum total size of keys of this table is 4GiB. Because this table is hash table. Therefore, If we execute many huge queries, Groonga may be unable to store query cache, because the maximum total size of keys may be over 4GiB. In such cases, We can clear the table for query cache by using ``cache_limit 0``, and Groonga can store query cache"
950 msgstr "Groongaは内部的なテーブルにクエリーキャッシュを保存しています。このテーブルは、ハッシュテーブルなので、トータルのキーサイズは最大で4GiBです。そのため、もし多くの巨大なクエリーを実行した場合、トータルのキーサイズの最大値4GiBを超え、Groongaがクエリーをキャッシュできない可能性があります。このようなケースで、 ``cache_limit 0`` を実行することで、クエリーキャッシュ用のテーブルをクリアーし、Groongaがクエリーキャッシュを保存できるようにします。"
951
952 msgid "We needed to restart Groonga to resolve this problem until now. However, We can resolve this problem if we just execute ``cache_limit 0`` by this improvement."
953 msgstr "今まではこの問題を解消するには、Groongaを再起動する必要がありましたが、この改良によって、 ``cache_limit 0`` を実行するだけで問題を解消できます。"
954
955 msgid "See :ref:`release 11.0.6 <release-11-0-6>` for details."
956 msgstr "詳細は、 :ref:`release 11.0.6 <release-11-0-6>` を参照してください。"
957
958 msgid "[:doc:`/reference/functions/between`] Added support for optimizing the order of evaluation of a conditional expression."
959 msgstr "[:doc:`/reference/functions/between`] ``between()`` で、条件式の評価順序の最適化をサポートしました。"
960
961 msgid "We can use the optimization of the order of evaluation of a conditional expression in ``between()`` by setting ``GRN_EXPR_OPTIMIZE=yes``. This optimization is effective with respect if ``between()`` narrow down records enough or ``between()`` can't narrow down few records."
962 msgstr "``GRN_EXPR_OPTIMIZE=yes`` を設定することで、 ``between()`` で条件式の評価順序の最適化を使えます。この最適化は、 ``between()`` で十分にレコードを絞り込めるか、 ``between()`` でほとんどレコードを絞り込めない時に効果があります。"
963
964 msgid "[:doc:`/reference/log`] Added support for outputting to stdout and stderr."
965 msgstr "[:doc:`/reference/log`] 標準出力、標準エラー出力への出力をサポートしました。"
966
967 msgid "This feature is useful when we execute Groonga on Docker. Docker has the feature that records stdout and stderr in standard. Therefore, we don't need to login into the environment of Docker to get Groonga's log."
968 msgstr "この機能はDocker上でGroongaを実行する際に有用です。Dockerは標準で標準出力と標準エラー出力を記録する機能を持っています。したがって、Groongaのログを取得するために、Dockerの環境にログインする必要がなくなります。"
969
970 msgid "See :ref:`release 11.0.4 <release-11-0-4>` for details."
971 msgstr "詳細は、 :ref:`release 11.0.4 <release-11-0-4>` を参照してください。"
972
973 msgid "[:doc:`/reference/functions/query`] Added support for ignoring ``TokenFilterStem`` and ``TokenFilterStopWord`` by the query."
974 msgstr "[:doc:`/reference/functions/query`] クエリー毎に ``TokenFilterStem`` と ``TokenFilterStopWord`` を無効にできるようになりました。"
975
976 msgid "We are able to search without ``TokenFilterStem`` and ``TokenFilterStopWord`` in only a specific query."
977 msgstr "特定のクエリーでのみ ``TokenFilterStem`` と ``TokenFilterStopWord`` を無効にして検索できるようになりました。"
978
979 msgid "This feature is useful when we want to search for the same words exactly as a search keyword. Normally, Groonga gets better results with enable stemming and stopwords excepting. However, if we want to search words the same as a keyword of search exactly, These features are needless."
980 msgstr "この機能は、検索キーワードと正確に同じ語を検索したい時に便利です。通常、ステミングやストップワードの除去を有効にしたほうが良い結果を得られますが、検索キーワードと正確に同じ語を検索したい場合は、これらの機能は不要です。"
981
982 msgid "Until now, If we want to search words the same as a keyword of search exactly, We needed to make the index of the exclusive use. By this improvement, we can search words the same as a keyword of search exactly without making the index of the exclusive use."
983 msgstr "今までは、検索キーワードと正確に同じ語を検索したい場合は、専用のインデックスを作る必要がありましたが、この改良によって、専用のインデックスを作らずに検索キーワードと正確に同じ語を検索できます。"
984
985 msgid "See :ref:`release 11.0.3 <release-11-0-3>` for details."
986 msgstr "詳細は、 :ref:`release 11.0.3 <release-11-0-3>` を参照してください。"
987
988 msgid "[:doc:`/reference/functions/string_slice`] Added a new function ``string_slice()``."
989 msgstr "[:doc:`/reference/functions/string_slice`] 新しい関数 ``string_slice`` を追加しました。"
990
991 msgid "``string_slice()`` extracts a substring of a string of search results by position or regular expression. This function is useful if we want to edit search results."
992 msgstr "``string_slice()`` は、検索結果の文字列から文字の位置や正規表現を使って、部分文字列を抽出します。この機能は、検索結果を編集したい時に便利です。"
993
994 msgid "For example, this feature is useful in that we exclude tags from search results."
995 msgstr "例えば、この機能は、検索結果からタグを除去するのに使えます。"
996
997 msgid "[:doc:`/reference/functions/query_parallel_or`] Added a new function for processing queries in parallel."
998 msgstr "[:doc:`/reference/functions/query_parallel_or`] クエリーを並行して実行できる新しい関数を追加しました。"
999
1000 msgid "``query_parallel_or`` is similar to query but ``query_parallel_or`` processes query that has multiple OR conditions in parallel. We can increase in speed of the execution of many OR conditions by using this function."
1001 msgstr "``query_parallel_or`` は query と似ていますが、 ``query_parallel_or`` は複数の OR 条件を並列に処理します。この機能を使うことで、大量のOR条件の実行速度を向上できます。"
1002
1003 msgid "However, ``query_parallel_or`` alone uses multiple CPUs. Therefore, queries that are executing at the same time as the query that executes ``query_parallel_or`` may be slow."
1004 msgstr "ただ、 ``query_parallel_or`` だけで複数のCPUを使います。したがって、 ``query_parallel_or`` と同時に実行しているクエリーは速度が低下する可能性があります。"
1005
1006 msgid "[:doc:`/reference/token_filters`] Added support for multiple token filters with options."
1007 msgstr "[:doc:`/reference/token_filters`] オプションをつけた複数のトークンフィルターを使えるようにしました。 "
1008
1009 msgid "We can use multiple token filters with options as the following example."
1010 msgstr "以下の例のように、オプション付きのトークンフィルターを複数使うことができます。"
1011
1012 msgid "[:doc:`/reference/commands/select`] Added support for ``--post_filter`` and ``--slices[].post_filter``."
1013 msgstr "[:doc:`/reference/commands/select`] ``--post_filter`` と ``--slices[].post_filter`` をサポートしました。"
1014
1015 msgid "We can filter again after we execute ``--filter`` by using ``--post_filter`` and ``--slices[].post_filter``. The difference between ``--post_filter`` and ``--slices[].post_filter`` is response format."
1016 msgstr "``--post_filter`` と ``--slices[].post_filter`` を使うことで、 ``--filter`` 実行後に再度フィルタリングすることができます。``--post_filter`` と ``--slices[].post_filter`` の違いは応答フォーマットです。"
1017
1018 msgid "The response format of ``--post_filter`` same as the response of ``--filter``. The response format of ``--slices[].post_filter`` show the result of before and after ``--slices[].post_filter`` executed."
1019 msgstr "``--post_filter`` の応答フォーマットは、 ``--filter`` と同じです。``--slices[].post_filter`` の応答フォーマットは ``--slices[].post_filter`` の実行前後の結果を出力します。"
1020
1021 msgid "Note that if we use ``--slices[].post_filter``, the format of the response is different from the normal ``select`` 's response."
1022 msgstr "``--slices[].post_filter`` の応答フォーマットは、通常の ``select`` の応答と異なることに注意してください。"
1023
1024 msgid "Fixed a bug that the version up of Groonga failed Because the version up of arrow-libs on which Groonga depends."
1025 msgstr "Groongaが依存している arrow-libs がバージョンアップしたことによって、Groongaのバージョンアップが失敗する問題を修正しました。"
1026
1027 msgid "However, if arrow-libs update a major version, this problem reproduces. In this case, we will handle that by rebuilding the Groonga package."
1028 msgstr "ただし、 arrow-libs がメジャーバージョンアップした場合は、この問題は再発します。その場合は、Groongaパッケージを再構築して対応する予定です。"
1029
1030 msgid "This bug only occurs AlmaLinux 8 and CentOS 7."
1031 msgstr ""
1032
1033 msgid "[Windows] Fixed a resource leak when Groonga fail open a new file caused by out of memory."
1034 msgstr "[Windows] メモリー不足によって、新しくファイルのオープンに失敗した時にリソースリークする問題を修正しました。"
1035
1036 msgid "Fixed a bug that Groonga may not have returned a result of a search query if we sent many search queries when tokenizer, normalizer, or token_filters that support options were used."
1037 msgstr "オプションをサポートしているトークナイザーやノーマライザー、トークンフィルターが使われている際、多くの検索クエリーを送信するとGroongaが応答を返さなくなることがある問題を修正しました。"
1038
1039 msgid "Fixed a bug that there is possible that index is corrupt when Groonga executes many additions, delete, and update information in it."
1040 msgstr "インデックス内のデータを大量に追加、削除、更新した際にインデックスが破損することがある問題を修正しました。"
1041
1042 msgid "This bug occurs when we only execute many delete information from index. However, it doesn’t occur when we only execute many additions information into index."
1043 msgstr "この問題は、インデックス内のデータを大量に削除しただけでも発生します。ただ、インデックスにデータを追加しただけでは発生しません。"
1044
1045 msgid "See :ref:`release 11.0.0 <release-11-0-0>` for details."
1046 msgstr "詳細は、 :ref:`release 11.0.0 <release-11-0-0>` を参照してください。"
1047
1048 msgid "Newly supported OSes"
1049 msgstr "新しくサポートしたOS"
1050
1051 msgid "[:doc:`/install/almalinux`] Added support for AlmaLinux 8."
1052 msgstr "[:doc:`/install/almalinux`] AlmaLinux 8 向けのパッケージをサポートしました。"
1053
1054 msgid "[:doc:`/install/almalinux`] Added support for AlmaLinux 8 for ARM64."
1055 msgstr "[:doc:`/install/almalinux`] ARM64版 AlmaLinux 8 向けのパッケージをサポートしました。"
1056
1057 msgid "[:doc:`/install/debian`] Added support for Debian 11 (Bullseye)."
1058 msgstr "[:doc:`/install/debian`] Debian 11 (Bullseye) をサポートしました。"
1059
1060 msgid "[:doc:`/install/debian`] Added support for Debian 11 (Bullseye) for ARM64 and Debian 10 (buster) for ARM64."
1061 msgstr "[:doc:`/install/debian`] ARM64版 Debian 11 (Bullseye) と ARM64版 Debian 10 (buster) をサポートしました。"
1062
1063 msgid "[:doc:`/install/ubuntu`] Added support for Ubuntu 21.10 (Impish Indri)."
1064 msgstr "[:doc:`/install/ubuntu`] Ubuntu 21.10 (Impish Indri)をサポートしました。"
1065
1066 msgid "Dropped support OSes"
1067 msgstr "サポートをやめたOS"
1068
1069 msgid "[:doc:`/install/centos`] Dropped support for CentOS 8."
1070 msgstr "[:doc:`/install/centos`] CentOS 8のサポートをやめました。"
1071
1072 msgid "[:doc:`/install/ubuntu`] Dropped support for Ubuntu 21.04 (Hirsute Hippo)."
1073 msgstr "[:doc:`/install/ubuntu`] Ubuntu 21.04 (Hirsute Hippo)のサポートをやめました。"
1074
1075 msgid "[:doc:`/install/ubuntu`] Dropped support for Ubuntu 20.10 (Groovy Gorilla)."
1076 msgstr "[:doc:`/install/ubuntu`] Ubuntu 20.10 (Groovy Gorilla)のサポートをやめました。"
1077
1078 msgid "[:doc:`/install/ubuntu`] Dropped support for Ubuntu 16.04 LTS (Xenial Xerus)."
1079 msgstr "[:doc:`/install/ubuntu`] Ubuntu 16.04 LTS (Xenial Xerus)のサポートをやめました。"
1080
1081 msgid "[:doc:`/install/windows`] Dropped support for the following packages of Windows version that we had cross-compiled by using MinGW on Linux."
1082 msgstr "[:doc:`/install/windows`] Linux上のMinGWを使ってクロスコンパイルしていた以下のWindows向けパッケージの提供をやめました。"
1083
1084 msgid "groonga-x.x.x-x86.exe"
1085 msgstr ""
1086
1087 msgid "groonga-x.x.x-x86.zip"
1088 msgstr ""
1089
1090 msgid "groonga-x.x.x-x64.exe"
1091 msgstr ""
1092
1093 msgid "Anthony M. Cook"
1094 msgstr "Anthony M. Cookさん"
1095
1096 msgid "MASUDA Kazuhiro"
1097 msgstr "MASUDA Kazuhiroさん"
1098
1099 msgid "poti"
1100 msgstr "potiさん"
1101
1102 msgid "Takashi Hashida"
1103 msgstr "Takashi Hashidaさん"
1104
1105 msgid "higchi"
1106 msgstr "higchiさん"
1107
1108 msgid "wi24rd"
1109 msgstr "wi24rdさん"
1110
1111 msgid "Josep Sanz"
1112 msgstr "Josep Sanzさん"
1113
1114 msgid "Keitaro YOSHIMURA"
1115 msgstr "Keitaro YOSHIMURAさん"
1116
1117 msgid "shibanao4870"
1118 msgstr "shibanao4870さん"
1119
1120 msgid "The main changes in 12.0.0 are as follows."
1121 msgstr "12.0.0 の主な変更点は以下の通りです。"
1122
1123 msgid "[:doc:`/reference/functions/sub_filter`] Added a new option ``pre_filter_threshold``."
1124 msgstr "[:doc:`/reference/functions/sub_filter`] 新しいオプション ``pre_filter_threshold`` を追加しました。"
1125
1126 msgid "We can change the value of ``GRN_SUB_FILTER_PRE_FILTER_THRESHOLD`` by this option. If the number of records is less than ``GRN_SUB_FILTER_PRE_FILTER_THRESHOLD`` when Groonga executes ``sub_filter``, Groonga execute ``sub_filter`` against records that have been already narrowed down."
1127 msgstr "このオプションで、 ``GRN_SUB_FILTER_PRE_FILTER_THRESHOLD`` の値を変更できます。Groongaが ``sub_filter`` 実行時に レコード数が ``GRN_SUB_FILTER_PRE_FILTER_THRESHOLD`` 以下だった場合、Groongaは既に絞り込んだレコードに対して ``sub_filter`` を実行します。"
1128
1129 msgid "We can use -1 to always use this optimization."
1130 msgstr "-1にすると、常にこの最適化を有効にできます。"
1131
1132 msgid "[index_column_have_source_record] Added a new function ``index_column_have_source_record()``."
1133 msgstr "[index_column_have_source_record] 新しい関数 ``index_column_have_source_record()`` を追加しました。"
1134
1135 msgid "We can confirm whether a token that is existing in the index is included in any of the records that are registered in Groonga or not."
1136 msgstr "インデックスに存在するトークンがGroongaに登録されているいずれかのレコードに含まれているかどうかを確認できます。"
1137
1138 msgid "Groonga does not remove a token even if the token become never used from records in Groonga by updating records. Therefore, for example, when we use the feature of autocomplete, Groonga may return a token that is not included in any of the records as candidates for search words. However, we can become that we don't return the needless token by using this function."
1139 msgstr "Groongaは、レコードの更新によってどのレコードからも使われていないトークンがあっても、それを削除しません。したがって、例えば、オートコンプリート機能を使っていると、検索候補としてどのレコードにも含まれていないトークンを返す可能性がありますが、この関数をつかうことで、不要なトークンを返さないようにできます。"
1140
1141 msgid "Because this function can detect a token that is not included in any of the records."
1142 msgstr "この関数は、トークンがどのレコードにも含まれていないことを検出できるからです。"
1143
1144 msgid "[:doc:`/reference/normalizers/normalizer_nfkc130`] Added a new option ``strip``"
1145 msgstr "[:doc:`/reference/normalizers/normalizer_nfkc130`] 新しいオプション ``strip`` を追加しました。"
1146
1147 msgid "This option removes spaces from the start and the end as below."
1148 msgstr "このオプションは、先頭と末尾から空白を削除します。"
1149
1150 msgid "[:doc:`/reference/commands/select`] Added new arguments ``drilldown_max_n_target_records`` and ``drilldown[${LABEL}].max_n_target_records``."
1151 msgstr "[:doc:`/reference/commands/select`] 新しい引数 ``drilldown_max_n_target_records`` と ``drilldown[${LABEL}].max_n_target_records`` を追加しました。"
1152
1153 msgid "We can specify the max number of records of the drilldown target table (filtered result) to use drilldown. If the number of filtered result is larger than the specified value, some records in filtered result aren't used for drilldown. The default value of this arguments are ``-1``. If these arguments are set ``-1``, Groonga uses all records for drilldown."
1154 msgstr "ドリルダウン対象のテーブル(フィルター結果)の中のうち最大で何レコードをドリルダウンに使うかを指定します。もし、フィルター結果のレコード数が指定した値より大きかったらフィルターした結果内のいくつかのレコードはドリルダウンには使われません。これらの引数のデフォルト値は、 ``-1`` です。これらの引数に ``-1`` がセットされた場合、Groongaは全てのレコードをドリルダウンに使います。"
1155
1156 msgid "This argument is useful when filtered result may be very large. Because a drilldown against large filtered result may be slow. We can limit the max number of records to be used for drilldown by this feature."
1157 msgstr "この機能はフィルター結果が非常に大きくなるかもしれない場合に有用です。大きなフィルター結果に対するドリルダウンは遅くなることがあるためです。この機能を使うことでドリルダウンに使うレコード数を制限できます。"
1158
1159 msgid "Here is an example to limit the max number of records to be used for drilldown. The last 2 records, ``{\\\"_id\\\": 4, \\\"tag\\\": \\\"Senna\\\"}`` and ``{\\\"_id\\\": 5, \\\"tag\\\": \\\"Senna\\\"}``, aren't used."
1160 msgstr "以下はドリルダウンに使う最大レコード数を制限する例です。最後の2レコード( ``{\"_id\": 4, \"tag\": \"Senna\"}`` と ``{\"_id\": 5, \"tag\": \"Senna\"}`` )は使われていません。"
1161
1162 msgid "[httpd] Updated bundled nginx to 1.21.6."
1163 msgstr "[httpd] バンドルしているnginxのバージョンを1.21.6に更新しました。"