Debian Codegraph @

eyes17/html/scope.html

raw
1 <html>
2 <head>
3 <meta content="text/html; charset=windows-1252" http-equiv="content-type">
4 </head>
5 <body><font face="Times" size="2"> </font>
6 <ul>
7 <li><a href="https://www.youtube.com/channel/UCIHUjpPn9wf1aHElqLn1RJQ">Link
8 to Youtube videos</a><br>
9 <font color="black" face="verdana" size="2"> </font></li>
10 <li><font color="black" face="verdana" size="2">
11 <p>The Oscilloscope program mainly functions as a four channel
12 oscilloscope, with inputs A1, A2,A3 and MIC. </p>
13 </font></li>
14 <li><font color="black" face="verdana" size="2">
15 <p>Adjust the x-axis limit of the graph, using the Timebase Slider,
16 generally to view several cycles of the waveform.</p>
17 </font></li>
18 <li><font color="black" face="verdana" size="2">
19 <p>If the waveform is not stable, select the proper trigger source. If
20 needed adjust the Trigger level.</p>
21 </font></li>
22 <li><font color="black" face="verdana" size="2">
23 <p>The traces can be saved to a file, in text format. It is possible
24 to take the Fourier transform and view the frequency spectrum of the
25 input waveform.</p>
26 </font></li>
27 <li><font color="black" face="verdana" size="2">
28 <p>The oscilloscope program also has control/monitor widgets on the
29 right side panel to access most of the ExpEYES features.</p>
30 </font></li>
31 <li><font color="black" face="verdana" size="2">
32 <p>The inputs A1, A2, A3 and the resistance connected to SEN are
33 measured and displayed every second. But these readings are
34 meaningless when AC inputs are connected. </p>
35 </font></li>
36 <li><font color="black" face="verdana" size="2">
37 <p>For sinusoidal AC inputs, enable the Check-Button in front of the
38 channel widget to view the Peak voltage and frequency.</p>
39 </font></li>
40 <li><font color="black" face="verdana" size="2">The ExpEYES Input/Output
41 terminals are briefly described below.<br>
42 </font></li>
43 </ul>
44 <ul>
45 </ul>
46 <font color="black" face="verdana" size="2">
47 <p><img src="images/scope-outputs.png" alt=""> <br>
48 Output Terminals</p>
49 <ul>
50 <li><strong>CCS:</strong> 1.1mA Constant Current Source. On/Off using
51 Check-Button Enable CCS.</li>
52 <li><strong>PV1:</strong> Progrmmable Voltage, +/5 volts range. Can be
53 set using the Slider or Text-Entry widget</li>
54 <li><strong>PV2:</strong> Similar to PV1, but ranges from -3.3V to +3.3V</li>
55 <li><strong>SQ1:</strong> Square Wave Generator, swings from 0 to 5V.
56 Frequency can be set from 1Hz to 5kHz</li>
57 <li><strong>SQ2:</strong> Same as SQ1, but available as an option of WG.
58 is used</li>
59 <li><strong>OD1:</strong> Digital Output, voltage can be set to 0 or 5
60 volts</li>
61 <li><strong>WG:</strong> Waveform Generator. Frequency from 1Hz to 5kHz.
62 Amplitude can be set to 3V, 1V or 80mV. Can be set to Sine, Triangular
63 or Square. In Square mode the output is on SQ2, with 0 to 5V swing.</li>
64 <li><strong>-WG:</strong> Inverted output of WG</li>
65 </ul>
66 <p><img src="images/scope-inputs.png" alt=""> <br>
67 Input Terminals</p>
68 <ul>
69 <li><strong>IN1:</strong> Input for measuring Capacitance. Push-Button
70 provided for measurement.</li>
71 <li><strong>IN2:</strong> Input for measuring frequency of digital
72 signals, swinging between 0 and (3 to 5) volts. Push-Button provided
73 for measurement.</li>
74 <li><strong>SEN:</strong> Input for measuring resistance. This point is
75 internally connected to 3.3 volts via a 5.1k resistor</li>
76 <li><strong>A1:</strong> Voltage measurement point, functions as
77 voltmeter and oscilloscope. Maximum Input range +/-16 volts, range is
78 selectable from pull down menu. AC/DC mode selection by slider switch
79 on the box.</li>
80 <li><strong>A2:</strong> Same as A1, but no AC coupled mode</li>
81 <li><strong>A3:</strong> Voltage measurement in +/-3.3 volt range. Small
82 signals can be amplified by connecting a resistance from Rg to Ground</li>
83 <li><strong>MIC:</strong> Condenser microphone input, output appears as
84 the fourth channel of the oscilloscope</li>
85 <li><strong>Rg:</strong> Gain resistor for A3. Gain = 1 + Rext/10000.
86 For example connecting a 1k resistor gives a gain of 11</li>
87 </ul>
88 <p><br>
89 </p>
90 <ul>
91 </ul>
92 </font>
93 </body>
94 </html>