Debian Codegraph @

eyes17/html/acdc-separating.html

raw
1 <p>The objective of this experiment is to show that a signal could be a combination of AC and DC.
2 The AC part can be separated using a capacitor, since it blocks DC. We will use a 0 to 5V square wave
3 as input. It is a combination of 2.5 volt DC and 2.5 volt DC</p>
4 <h2 id="schematic">Schematic</h2>
5 <hr>
6 <p><img src="images/acdc-separating.png" alt=""></p>
7 <h2 id="instructions">Instructions</h2>
8 <hr>
9 <ul>
10 <li>The output of SQ1 changes between 0 and 5 volts, as shown by the output A1.</li>
11 <li>That means it has an average of 2.5 volts, that is the DC part</li>
12 <li>After passing through a capacitor the voltage changes from -2.5 to +2.5 volts, the AC part.</li>
13 <li>The DC part is blocked by the capacitor.</li>
14 <li>You need to connect a 100kOhm resistor from A2 to ground to remove the DC properly.</li>
15 </ul>