Debian Codegraph @

texmf-dist/fonts/source/public/sansmathfonts/ssmsam9.mf

raw
1 % AMS-style Sans Serif Math Symbols A 9 pt
2 % Based on msam9.mf by the American Mathematical Society
3 % and on fonts by Donald Knuth
4 % By Ariel Barton, 2013/4/12
5 if unknown sansfontbase: input sansfontbase fi
6
7 font_identifier:="SSMSAM"; font_size 9pt#;
8
9 u#:=18.5/36pt#; % cmssi9 % unit width
10 width_adj#:=13/36pt#; % cmssi9 % width adjustment for certain characters
11 serif_fit#:=-6.5/36pt#; % cmssi9 % extra sidebar near lowercase serifs
12 cap_serif_fit#:=-9/36pt#; % cmssi9 % extra sidebar near uppercase serifs
13 letter_fit#:=0pt#; % cmssi9 % extra space added to all sidebars
14
15 body_height#:=243/36pt#; % cmssi9 % height of tallest characters
16 asc_height#:=225/36pt#; % cmssi9 % height of lowercase ascenders
17 cap_height#:=225/36pt#; % cmssi9 % height of caps
18 fig_height#:=212/36pt#; % cmssi9 % height of numerals
19 x_height#:=144/36pt#; % cmssi9 % height of lowercase without ascenders
20 math_axis#:=81/36pt#; % cmssi9 % axis of symmetry for math symbols
21 bar_height#:=71/36pt#; % cmssi9 % height of crossbar in lowercase e
22 comma_depth#:=41/36pt#; % cmssi9 % depth of comma below baseline
23 desc_depth#:=63/36pt#; % cmssi9 % depth of lowercase descenders
24
25 crisp#:=0pt#; % msam10 % diameter of serif corners
26 tiny#:=0pt#; % cmssi9 % diameter of rounded corners
27 fine#:=0pt#; % cmssi9 % diameter of sharply rounded corners
28 thin_join#:=16/36pt#; % cmssi9 % width of extrafine details
29 hair#:=27/36pt#; % cmssi9 % lowercase hairline breadth
30 stem#:=27/36pt#; % cmssi9 % lowercase stem breadth
31 curve#:=27/36pt#; % cmssi9 % lowercase curve breadth
32 ess#:=27/36pt#; % cmssi9 % breadth in middle of lowercase s
33 flare#:=24/36pt#; % cmssi9 % diameter of bulbs or breadth of terminals
34 dot_size#:=28/36pt#; % cmssi9 % diameter of dots
35 cap_hair#:=27/36pt#; % cmssi9 % uppercase hairline breadth
36 cap_stem#:=31/36pt#; % cmssi9 % uppercase stem breadth
37 cap_curve#:=31/36pt#; % cmssi9 % uppercase curve breadth
38 cap_ess#:=31/36pt#; % cmssi9 % breadth in middle of uppercase s
39 rule_thickness#:=13.68/36pt#; % cmssi9 % thickness of lines in math symbols
40
41 dish#:=0pt#; % cmssi9 % amount erased at top or bottom of serifs
42 bracket#:=0pt#; % cmssi9 % vertical distance from serif base to tangent
43 jut#:=0pt#; % cmssi9 % protrusion of lowercase serifs
44 cap_jut#:=0pt#; % cmssi9 % protrusion of uppercase serifs
45 beak_jut#:=0pt#; % cmssi9 % horizontal protrusion of beak serifs
46 beak#:=0.5/36pt#; % cmssi9 % vertical protrusion of beak serifs
47 vair#:=21/36pt#; % cmssi9 % vertical diameter of hairlines
48 notch_cut#:=17/36pt#; % cmssi9 % maximum breadth above or below notches
49 bar#:=20/36pt#; % cmssi9 % lowercase bar thickness
50 slab#:=22/36pt#; % cmssi9 % serif and arm thickness
51 cap_bar#:=21/36pt#; % cmssi9 % uppercase bar thickness
52 cap_band#:=19/36pt#; % cmssi9 % uppercase thickness above/below lobes
53 cap_notch_cut#:=24/36pt#; % cmssi9 % max breadth above/below uppercase notches
54 serif_drop#:=2/36pt#; % cmssi9 % vertical drop of sloped serifs
55 stem_corr#:=1/36pt#; % cmssi9 % for small refinements of stem breadth
56 vair_corr#:=1/36pt#; % cmssi9 % for small refinements of hairline height
57 apex_corr#:=4.5/36pt#; % cmssi9 % extra width at diagonal junctions
58
59 o#:=7/36pt#; % cmssi9 % amount of overshoot for curves
60 apex_o#:=0pt#; % cmssi9 % amount of overshoot for diagonal junctions
61
62 slant:=0; % msam10 % tilt ratio $(\Delta x/\Delta y)$
63 fudge:=0.95; % cmssi9 % factor applied to weights of heavy characters
64 math_spread:=0.2; % cmssi9 % extra openness of math symbols
65 superness:=0.7071; % cmssi9 % parameter for superellipses
66 superpull:=0.05; % cmssi9 % extra openness inside bowls
67 beak_darkness:=0; % cmssi9 % fraction of triangle inside beak serifs
68 ligs:=2; % cmmi9 % level of ligatures to be included
69
70 square_dots:=true; % cmssi9 % should dots be square?
71 hefty:=true; % cmssi9 % should we try hard not to be overweight?
72 serifs:=false; % cmssi9 % should serifs and bulbs be attached?
73 monospace:=false; % cmssi9 % should all characters have the same width?
74 variant_g:=false; % cmssi9 % should an italic-style g be used?
75 low_asterisk:=false; % cmssi9 % should the asterisk be centered at the axis?
76 math_fitting:=true; % cmmi9 % should math-mode spacing be used?
77
78 bigdw#:=4/36pt#; % cmmi9% Adjusted dw for unusually wide strokes
79
80 % the following font parameters are explained in {\sl The \TeX book}, Appendix G
81 subs:=6/9; % subscripts to 9pt will normally be in 6pt type
82 rth#:=.4pt#; % assume that rules will come from cmex10
83 fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
84 math_axis#+3.51rth#+36/36pt#+subs*desc_depth#, % num1
85 math_axis#+1.51rth#+30/36pt#, % num2
86 math_axis#+1.51rth#+43/36pt#, % num3
87 -(math_axis#-3.51rth#-subs*fig_height#-111/36pt#), % denom1
88 -(math_axis#-1.51rth#-subs*fig_height#-30/36pt#), % denom2
89 8.49pt#-subs*asc_height#, % sup1
90 7.99pt#-subs*asc_height#, % sup2
91 93/36pt#, % sup3
92 36/36pt#, % sub1
93 -(7.99pt#-2subs*asc_height#-3.1rth#), % sub2
94 subs*asc_height#-36/36pt#, % sup_drop
95 18/36pt#, % sub_drop
96 23.9pt#, % delim1
97 9.1pt#, % delim2
98 math_axis#; % axis_height
99
100 %% include these parameters to shrink R and S so they
101 %% fit inside a circle
102 %
103 lower.u#:=14.5/36pt#; % eczi0900 % unit width
104 lower.width_adj#:=9.75/36pt#; % eczi0900 % width adjustment for certain characters
105 lower.cap_serif_fit#:=-7.04/36pt#;% eczi0900 % extra sidebar near uppercase serifs
106 lower.letter_fit#:=2/36pt#; % eczi0900 % extra space added to all sidebars
107
108 lower.body_height#:=173/36pt#; % eczi0900 % height of tallest characters
109 lower.cap_height#:=163/36pt#; % eczi0900 % height of caps
110 lower.x_height#:=103.7/36pt#; % eczi0900 % height of lowercase without ascenders
111 lower.bar_height#:=51/36pt#; % eczi0900 % height of crossbar in lowercase e
112 lower.comma_depth#:=29.28/36pt#;% eczi0900 % depth of comma below baseline
113
114 lower.flare#:=17.6/36pt#; % eczi0900 % diameter of bulbs or breadth of terminals
115 lower.cap_hair#:=21.86/36pt#; % eczi0900 % uppercase hairline breadth
116 lower.stem#:=22.49/36pt#; % eczi0900 % lowercase stem breadth
117 lower.cap_stem#:=24.58/36pt#; % eczi0900 % uppercase stem breadth
118 lower.cap_curve#:=25.36/36pt#; % eczi0900 % uppercase curve breadth
119 lower.cap_ess#:=24/36pt#; % eczi0900 % breadth in middle of uppercase s
120
121 lower.cap_jut#:=0pt#; % eczi0900 % protrusion of uppercase serifs
122 lower.beak_jut#:=0pt#; % eczi0900 % horizontal protrusion of beak serifs
123 lower.beak#:=0.36/36pt#; % eczi0900 % vertical protrusion of beak serifs
124 lower.slab#:=17.82/36pt#; % eczi0900 % serif and arm thickness
125 lower.cap_bar#:=17/36pt#; % eczi0900 % uppercase bar thickness
126 lower.cap_band#:=15.39/36pt#; % eczi0900 % uppercase thickness above/below lobes
127 lower.cap_notch_cut#:=24/36pt#; % eczi0900 % max breadth above/below uppercase notches
128
129 lower.o#:=4/36pt#; % eczi0900 % amount of overshoot for curves
130 lower.apex_o#:=0pt#; % eczi0900 % amount of overshoot for diagonal junctions
131
132 lower.fudge:=0.95; % eczi0900 % factor applied to weights of heavy characters
133
134
135 generate sans-amsya % switch to the driver file