Debian Codegraph @

texmf-dist/fonts/source/public/sansmathfonts/ssmsam10.mf

raw
1 % AMS-style Sans Serif Math Symbols A 10 pt
2 % Based on msam10.mf by the American Mathematical Society
3 % and on fonts by Donald Knuth
4 % By Ariel Barton, 2013/4/12
5 if unknown sansfontbase: input sansfontbase fi
6
7 font_identifier:="SSMSAM"; font_size 10pt#;
8
9 u#:=20/36pt#; % cmssi10 % unit width
10 width_adj#:=15/36pt#; % cmssi10 % width adjustment for certain characters
11 serif_fit#:=-7/36pt#; % cmssi10 % extra sidebar near lowercase serifs
12 cap_serif_fit#:=-10/36pt#; % cmssi10 % extra sidebar near uppercase serifs
13 letter_fit#:=0pt#; % cmssi10 % extra space added to all sidebars
14
15 body_height#:=270/36pt#; % cmssi10 % height of tallest characters
16 asc_height#:=250/36pt#; % cmssi10 % height of lowercase ascenders
17 cap_height#:=250/36pt#; % cmssi10 % height of caps
18 fig_height#:=236/36pt#; % cmssi10 % height of numerals
19 x_height#:=160/36pt#; % cmssi10 % height of lowercase without ascenders
20 math_axis#:=90/36pt#; % cmssi10 % axis of symmetry for math symbols
21 bar_height#:=79/36pt#; % cmssi10 % height of crossbar in lowercase e
22 comma_depth#:=45/36pt#; % cmssi10 % depth of comma below baseline
23 desc_depth#:=70/36pt#; % cmssi10 % depth of lowercase descenders
24
25 crisp#:=0pt#; % msam10 % diameter of serif corners
26 tiny#:=0pt#; % cmssi10 % diameter of rounded corners
27 fine#:=0pt#; % cmssi10 % diameter of sharply rounded corners
28 thin_join#:=17/36pt#; % cmssi10 % width of extrafine details
29 hair#:=28/36pt#; % cmssi10 % lowercase hairline breadth
30 stem#:=28/36pt#; % cmssi10 % lowercase stem breadth
31 curve#:=28/36pt#; % cmssi10 % lowercase curve breadth
32 ess#:=28/36pt#; % cmssi10 % breadth in middle of lowercase s
33 flare#:=25/36pt#; % cmssi10 % diameter of bulbs or breadth of terminals
34 dot_size#:=30/36pt#; % cmssi10 % diameter of dots
35 cap_hair#:=28/36pt#; % cmssi10 % uppercase hairline breadth
36 cap_stem#:=32/36pt#; % cmssi10 % uppercase stem breadth
37 cap_curve#:=32/36pt#; % cmssi10 % uppercase curve breadth
38 cap_ess#:=32/36pt#; % cmssi10 % breadth in middle of uppercase s
39 rule_thickness#:=14.4/36pt#; % cmssi10 % thickness of lines in math symbols
40
41 dish#:=0pt#; % cmssi10 % amount erased at top or bottom of serifs
42 bracket#:=0pt#; % cmssi10 % vertical distance from serif base to tangent
43 jut#:=0pt#; % cmssi10 % protrusion of lowercase serifs
44 cap_jut#:=0pt#; % cmssi10 % protrusion of uppercase serifs
45 beak_jut#:=0pt#; % cmssi10 % horizontal protrusion of beak serifs
46 beak#:=0.5/36pt#; % cmssi10 % vertical protrusion of beak serifs
47 vair#:=22/36pt#; % cmssi10 % vertical diameter of hairlines
48 notch_cut#:=18/36pt#; % cmssi10 % maximum breadth above or below notches
49 bar#:=21/36pt#; % cmssi10 % lowercase bar thickness
50 slab#:=23/36pt#; % cmssi10 % serif and arm thickness
51 cap_bar#:=22/36pt#; % cmssi10 % uppercase bar thickness
52 cap_band#:=20/36pt#; % cmssi10 % uppercase thickness above/below lobes
53 cap_notch_cut#:=25/36pt#; % cmssi10 % max breadth above/below uppercase notches
54 serif_drop#:=2/36pt#; % cmssi10 % vertical drop of sloped serifs
55 stem_corr#:=1/36pt#; % cmssi10 % for small refinements of stem breadth
56 vair_corr#:=1/36pt#; % cmssi10 % for small refinements of hairline height
57 apex_corr#:=5/36pt#; % cmssi10 % extra width at diagonal junctions
58
59 o#:=8/36pt#; % cmssi10 % amount of overshoot for curves
60 apex_o#:=0pt#; % cmssi10 % amount of overshoot for diagonal junctions
61
62 slant:=0; % msam10 % tilt ratio $(\Delta x/\Delta y)$
63 fudge:=0.96; % cmssi10 % factor applied to weights of heavy characters
64 math_spread:=0; % cmssi10 % extra openness of math symbols
65 superness:=0.7071; % cmssi10 % parameter for superellipses
66 superpull:=0.05; % cmssi10 % extra openness inside bowls
67 beak_darkness:=0; % cmssi10 % fraction of triangle inside beak serifs
68 ligs:=2; % cmmi10 % level of ligatures to be included
69
70 square_dots:=true; % cmssi10 % should dots be square?
71 hefty:=true; % cmssi10 % should we try hard not to be overweight?
72 serifs:=false; % cmssi10 % should serifs and bulbs be attached?
73 monospace:=false; % cmssi10 % should all characters have the same width?
74 variant_g:=false; % cmssi10 % should an italic-style g be used?
75 low_asterisk:=false; % cmssi10 % should the asterisk be centered at the axis?
76 math_fitting:=true; % cmmi10 % should math-mode spacing be used?
77
78 bigdw#:=5/36pt#; % cmmi10% Adjusted dw for unusually wide strokes
79
80 % the following font parameters are explained in {\sl The \TeX book}, Appendix G
81 subs:=7/10; % subscripts to 10pt will normally be in 7pt type
82 rth#:=.4pt#; % assume that rules will come from cmex10
83 fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
84 math_axis#+3.51rth#+54/36pt#+subs*desc_depth#, % num1
85 math_axis#+1.51rth#+30/36pt#, % num2
86 math_axis#+1.51rth#+48/36pt#, % num3
87 -(math_axis#-3.51rth#-subs*fig_height#-124/36pt#), % denom1
88 -(math_axis#-1.51rth#-subs*fig_height#-30/36pt#), % denom2
89 8.99pt#-subs*asc_height#, % sup1
90 8.49pt#-subs*asc_height#, % sup2
91 104/36pt#, % sup3
92 54/36pt#, % sub1
93 -(8.49pt#-2subs*asc_height#-3.1rth#), % sub2
94 subs*asc_height#-36/36pt#, % sup_drop
95 18/36pt#, % sub_drop
96 23.9pt#, % delim1
97 10.1pt#, % delim2
98 math_axis#; % axis_height
99
100 %% include these parameters to shrink R and S so they
101 %% fit inside a circle
102 %
103 lower.u#:=16/36pt#; % eczi1000 % unit width
104 lower.width_adj#:=11.25/36pt#; % eczi1000 % width adjustment for certain characters
105 lower.cap_serif_fit#:=-8/36pt#; % eczi1000 % extra sidebar near uppercase serifs
106 lower.letter_fit#:=2/36pt#; % eczi1000 % extra space added to all sidebars
107
108 lower.body_height#:=200/36pt#; % eczi1000 % height of tallest characters
109 lower.cap_height#:=188/36pt#; % eczi1000 % height of caps
110 lower.x_height#:=119.7/36pt#; % eczi1000 % height of lowercase without ascenders
111 lower.bar_height#:=59/36pt#; % eczi1000 % height of crossbar in lowercase e
112 lower.comma_depth#:=33.42/36pt#;% eczi1000 % depth of comma below baseline
113
114 lower.flare#:=18.93/36pt#; % eczi1000 % diameter of bulbs or breadth of terminals
115 lower.cap_hair#:=23.16/36pt#; % eczi1000 % uppercase hairline breadth
116 lower.stem#:=23.51/36pt#; % eczi1000 % lowercase stem breadth
117 lower.cap_stem#:=26/36pt#; % eczi1000 % uppercase stem breadth
118 lower.cap_curve#:=26.8/36pt#; % eczi1000 % uppercase curve breadth
119 lower.cap_ess#:=25.59/36pt#; % eczi1000 % breadth in middle of uppercase s
120
121 lower.cap_jut#:=0pt#; % eczi1000 % protrusion of uppercase serifs
122 lower.beak_jut#:=0pt#; % eczi1000 % horizontal protrusion of beak serifs
123 lower.beak#:=0.37/36pt#; % eczi1000 % vertical protrusion of beak serifs
124 lower.slab#:=19.02/36pt#; % eczi1000 % serif and arm thickness
125 lower.cap_bar#:=18.2/36pt#; % eczi1000 % uppercase bar thickness
126 lower.cap_band#:=16.54/36pt#; % eczi1000 % uppercase thickness above/below lobes
127 lower.cap_notch_cut#:=25/36pt#; % eczi1000 % max breadth above/below uppercase notches
128
129 lower.o#:=5/36pt#; % eczi1000 % amount of overshoot for curves
130 lower.apex_o#:=0pt#; % eczi1000 % amount of overshoot for diagonal junctions
131
132 lower.fudge:=0.96; % eczi1000 % factor applied to weights of heavy characters
133
134
135 generate sans-amsya % switch to the driver file