| 1 |
<?xml version="1.0"?> |
| 2 |
<!-- |
| 3 |
Heatit Z-Water |
| 4 |
https://products.z-wavealliance.org/products/3102 |
| 5 |
--> |
| 6 |
<Product xmlns="https://github.com/OpenZWave/open-zwave" Revision="3"> |
| 7 |
<MetaData> |
| 8 |
<MetaDataItem name="ProductPic">images/thermofloor/heatit20a.png</MetaDataItem> |
| 9 |
<MetaDataItem id="020a" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/3102/</MetaDataItem> |
| 10 |
<MetaDataItem name="InclusionDescription">Adding the device: |
| 11 |
When the primary controller is set to add/remove modus press the ”INCLUSION” button once on the device</MetaDataItem> |
| 12 |
<MetaDataItem id="020a" name="Identifier" type="0003">Z-Water</MetaDataItem> |
| 13 |
<MetaDataItem name="Description">Heatit Z-Water is equipped with 10 relay outputs and 4 analog inputs, and a Z-Wave radio for interfacing to the wireless |
| 14 |
Z-Wave network. |
| 15 |
The regulator can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. |
| 16 |
Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several |
| 17 |
purposes, e.g. on/off control of light, control of valve actuators for an underfloor heating system, or control of other home |
| 18 |
automation systems. |
| 19 |
Heatit Z-Water inputs are analog inputs for interfacing simple temperature sensors; NTC, PT1000, etc. |
| 20 |
It is possible to configure the level and the indication of the status indicator LED in the front of the Heatit Z-Water |
| 21 |
regulator.</MetaDataItem> |
| 22 |
<MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&filename=Manuals/3102/Manual_Heatit_Z-Water_analog%20inputs_FW%202.1_Ver2019-A_ENG.pdf</MetaDataItem> |
| 23 |
<MetaDataItem name="ExclusionDescription">Removing the device: When the primary controller is set to add/remove modus press the ”INCLUSION” button once on the device</MetaDataItem> |
| 24 |
<MetaDataItem id="020a" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem> |
| 25 |
<MetaDataItem name="ResetDescription">By pressing buttons Right and Center (down and confirm) for 20 seconds, the thermostat will perform a complete factory reset. |
| 26 |
NB! Please use this procedure only when the primary controller/ gateway is missing or otherwise inoperable.</MetaDataItem> |
| 27 |
<MetaDataItem name="Name">Heatit Z-Water</MetaDataItem> |
| 28 |
<ChangeLog> |
| 29 |
<Entry author="Espen Throndsen - [email protected]" date="21 Oct 2019" revision="1">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/3102/xml</Entry> |
| 30 |
<Entry author="Lars Tobias Skjong-Børsting - [email protected]" date="28 Jun 2020" revision="2">Added ProductPic</Entry> |
| 31 |
<Entry author="Lars Tobias Skjong-Børsting - [email protected]" date="12 Jul 2020" revision="3">Fixed errors</Entry> |
| 32 |
</ChangeLog> |
| 33 |
</MetaData> |
| 34 |
<CommandClass id="112"> |
| 35 |
<Value genre="config" index="1" label="status LED" size="1" type="list" value="1"> |
| 36 |
<Help>Set LED mode</Help> |
| 37 |
<Item label="LED turned off" value="0"/> |
| 38 |
<Item label="LED turned on.(default)" value="1"/> |
| 39 |
<Item label="2 LED flashing at 1 second intervals (½ Hz)" value="2"/> |
| 40 |
<Item label="3 LED flashing at ½ second interval (1 Hz)" value="3"/> |
| 41 |
</Value> |
| 42 |
<Value genre="config" index="2" instance="1" label="Specifies the brightness level of the LED when it is on.(0-100) Default is 50" size="1" type="byte" value="50"> |
| 43 |
<Help>Set Brightnes</Help> |
| 44 |
</Value> |
| 45 |
<Value genre="config" index="3" instance="1" label="Thermistor type connected to input 1" size="1" type="list" value="0"> |
| 46 |
<Help>This parameter decides which kind of thermistor that is connected to the input.</Help> |
| 47 |
<Item label="0 No thermistor, input is disabled" value="0"/> |
| 48 |
<Item label="1 10K NTC. (PART NUMBER: TT02-10KC3-93D-3000R-TPH). (Default)" value="1"/> |
| 49 |
</Value> |
| 50 |
<Value genre="config" index="4" instance="1" label="Thermistor type connected to input 2" size="1" type="list" value="0"> |
| 51 |
<Help>This parameter decides which kind of thermistor that is connected to the input.</Help> |
| 52 |
<Item label="0 No thermistor, input is disabled" value="0"/> |
| 53 |
<Item label="1 10K NTC. (PART NUMBER: TT02-10KC3-93D-3000R-TPH). (Default)" value="1"/> |
| 54 |
</Value> |
| 55 |
<Value genre="config" index="5" instance="1" label="Thermistor type connected to input 3" size="1" type="list" value="0"> |
| 56 |
<Help>This parameter decides which kind of thermistor that is connected to the input.</Help> |
| 57 |
<Item label="0 No thermistor, input is disabled" value="0"/> |
| 58 |
<Item label="1 10K NTC. (PART NUMBER: TT02-10KC3-93D-3000R-TPH). (Default)" value="1"/> |
| 59 |
</Value> |
| 60 |
<Value genre="config" index="6" instance="1" label="Thermistor type connected to input 4" size="1" type="list" value="0"> |
| 61 |
<Help>This parameter decides which kind of thermistor that is connected to the input.</Help> |
| 62 |
<Item label="0 No thermistor, input is disabled" value="0"/> |
| 63 |
<Item label="1 10K NTC. (PART NUMBER: TT02-10KC3-93D-3000R-TPH). (Default)" value="1"/> |
| 64 |
</Value> |
| 65 |
<Value genre="config" index="7" instance="1" label="Input 1 calibration" size="1" type="byte" max="255" min="0" value="0"> |
| 66 |
<Help>-40 - 40 (-4.0C - 4.0C) Default is 0 (0.0C) To set a negative value, use 255 and subtract the desired value.</Help> |
| 67 |
</Value> |
| 68 |
<Value genre="config" index="8" instance="1" label="Input 2 calibration" size="1" type="byte" max="255" min="0" value="0"> |
| 69 |
<Help>-40 - 40 (-4.0C - 4.0C) Default is 0 (0.0C) To set a negative value, use 255 and subtract the desired value.</Help> |
| 70 |
</Value> |
| 71 |
<Value genre="config" index="9" instance="1" label="Input 3 calibration" size="1" type="byte" max="255" min="0" value="0"> |
| 72 |
<Help>-40 - 40 (-4.0C - 4.0C) Default is 0 (0.0C) To set a negative value, use 255 and subtract the desired value.</Help> |
| 73 |
</Value> |
| 74 |
<Value genre="config" index="10" instance="1" label="Input 4 calibration" size="1" type="byte" max="255" min="0" value="0"> |
| 75 |
<Help>-40 - 40 (-4.0C - 4.0C) Default is 0 (0.0C) To set a negative value, use 255 and subtract the desired value.</Help> |
| 76 |
</Value> |
| 77 |
<Value genre="config" index="11" instance="1" label="Input 1 Temperature report interval" max="8640" min="0" size="2" type="short" value="60"> |
| 78 |
<Help> |
| 79 |
0 (Report disabled) |
| 80 |
Multiply with 10 seconds, 10 seconds – 24 hours. Default is 6 (60 seconds).</Help> |
| 81 |
</Value> |
| 82 |
<Value genre="config" index="12" instance="1" label="Input 2 Temperature report interval" max="8640" min="0" size="2" type="short" value="60"> |
| 83 |
<Help> |
| 84 |
0 (Report disabled) |
| 85 |
Multiply with 10 seconds, 10 seconds – 24 hours. Default is 6 (60 seconds).</Help> |
| 86 |
</Value> |
| 87 |
<Value genre="config" index="13" instance="1" label="Input 3 Temperature report interval" max="8640" min="0" size="2" type="short" value="60"> |
| 88 |
<Help> |
| 89 |
0 (Report disabled) |
| 90 |
Multiply with 10 seconds, 10 seconds – 24 hours. Default is 6 (60 seconds).</Help> |
| 91 |
</Value> |
| 92 |
<Value genre="config" index="14" instance="1" label="Input 4 Temperature report interval" max="8640" min="0" size="2" type="short" value="60"> |
| 93 |
<Help> |
| 94 |
0 (Report disabled) |
| 95 |
Multiply with 10 seconds, 10 seconds – 24 hours. Default is 6 (60 seconds).</Help> |
| 96 |
</Value> |
| 97 |
<Compatibility/> |
| 98 |
</CommandClass> |
| 99 |
<CommandClass id="133"> |
| 100 |
<Associations num_groups="5"> |
| 101 |
<Group index="1" label="Lifeline. - Reset notification - Basic Report On / Off - Multilevel Sensor Report" max_associations="5"/> |
| 102 |
<Group index="2" label="Sends Multilevel Sensor Reports for input 1" max_associations="5"/> |
| 103 |
<Group index="3" label="Sends Multilevel Sensor Reports for input 2" max_associations="5"/> |
| 104 |
<Group index="4" label="Sends Multilevel Sensor Reports for input 3" max_associations="5"/> |
| 105 |
<Group index="5" label="Sends Multilevel Sensor Reports for input 4" max_associations="5"/> |
| 106 |
</Associations> |
| 107 |
<Compatibility/> |
| 108 |
</CommandClass> |
| 109 |
<!-- COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V2--> |
| 110 |
<CommandClass id="142"> |
| 111 |
<Compatibility> |
| 112 |
<ForceInstances>true</ForceInstances> |
| 113 |
</Compatibility> |
| 114 |
</CommandClass> |
| 115 |
<!--COMMAND_CLASS_MULTI_CHANNEL_V2 Map endpoints to instances --> |
| 116 |
<CommandClass id="96"> |
| 117 |
<Compatibility> |
| 118 |
<MapRootToEndpoint>true</MapRootToEndpoint> |
| 119 |
</Compatibility> |
| 120 |
</CommandClass> |
| 121 |
</Product> |