Debian Codegraph @

config/thermofloor/heatitz8.xml

raw
1 <Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
2 <!-- Please refer to https://github.com/OpenZWave/open-zwave/wiki/Adding-Devices for instructions -->
3 <MetaData>
4 <MetaDataItem name="Name">Heatit Z-Push Button 8</MetaDataItem>
5 <MetaDataItem name="Description">The remote control is a Z-Wave device that can both control other Z-Wave devices and activate scenes in Gateways. Although it is controlling other devices, the device cannot act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be added into a Z-Wave network.</MetaDataItem>
6 <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/XXXX:XXXX:XXXX</MetaDataItem>
7 <MetaDataItem name="ProductPage">https://www.heatit.com/z-wave/heatit-z-push-button-8/</MetaDataItem>
8 <MetaDataItem name="ProductSupport">https://www.heatit.com/z-wave/heatit-z-push-button-8/</MetaDataItem>
9 <MetaDataItem name="ProductPic">images/thermofloor/Heatit-Z-Push-button-8-white.png</MetaDataItem>
10 <MetaDataItem name="ProductManual">https://www.thermo-floor.no/media/multicase/documents/_tfasdokumentasjon/heatit%20controls/heatit%20z-push%20button/manual_heatit_z-push_button_8_fw_1.26_ver2019-a_eng.pdf</MetaDataItem>
11 <MetaDataItem name="WakeupDescription">short press any button</MetaDataItem>
12 <MetaDataItem name="InclusionDescription">set controller in inclusion mode press and hold down group 2 keys for 3 seconds</MetaDataItem>
13 <MetaDataItem name="ExclusionDescription">set controller in exclusion mode press and hold down group 2 keys for 3 seconds</MetaDataItem>
14 <MetaDataItem name="ResetDescription">press and hold down group 2 keys for more than 10 seconds use only if controller is unavailable</MetaDataItem>
15 <MetaDataItem id="0xa305" name="ZWProductPage" type="0x0300">https://products.z-wavealliance.org/products/3595</MetaDataItem>
16 <MetaDataItem id="0xa305" name="FrequencyName" type="0x0300">CEPT</MetaDataItem>
17 <MetaDataItem id="0xa305" name="Identifier" type="0x0300">45 125 81 (white) 45 126 81 (black)</MetaDataItem>
18 <ChangeLog>
19 <Entry author="Jonathan Mos [email protected]" date="03 January 2020" revision="1">Made config from manual and zwave alliance</Entry>
20 <Entry author="Pål Kristensen - [email protected]" date="18 January 2021" revision="2">Removed auto include controller to Association Groups</Entry>
21 </ChangeLog>
22 </MetaData>
23 <!-- Configuration Command Class - All Configuration Parameters should be entered into the section below -->
24 <CommandClass id="112">
25
26 <!-- Here is a Byte/Int/Short Value Sample -->
27 <Value genre="config" index="1" label="Factory reset" max="21930" min="21930" type="int" units="" value="0" write_only="true">
28 <Help>
29 Set to 21930 to factory reset the device.
30 </Help>
31 </Value>
32 </CommandClass>
33 <!-- The Association Group Information -->
34 <CommandClass id="133">
35 <Associations num_groups="5">
36 <Group index="1" label="LifeLine" max_associations="5"/>
37 <Group index="2" label="Launch 1" max_associations="5"/>
38 <Group index="3" label="Launch 2" max_associations="5"/>
39 <Group index="4" label="Launch 3" max_associations="5"/>
40 <Group index="5" label="Launch 4" max_associations="5"/>
41 </Associations>
42 </CommandClass>
43 </Product>