| 1 |
<Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave"> |
| 2 |
<!-- Please refer to https://github.com/OpenZWave/open-zwave/wiki/Adding-Devices for instructions --> |
| 3 |
<MetaData> |
| 4 |
<MetaDataItem name="Name">Heatit Z-Push Button 4</MetaDataItem> |
| 5 |
<MetaDataItem name="Description">The remote control is a Z-Wave device that can both control other Z-Wave devices and activate scenes in Gateways. Although it is controlling other devices, the device cannot act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be added into a Z-Wave network.</MetaDataItem> |
| 6 |
<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/XXXX:XXXX:XXXX</MetaDataItem> |
| 7 |
<MetaDataItem name="ProductPage">https://www.heatit.com/z-wave/heatit-z-push-button-4/</MetaDataItem> |
| 8 |
<MetaDataItem name="ProductSupport">https://www.heatit.com/z-wave/heatit-z-push-button-4/</MetaDataItem> |
| 9 |
<MetaDataItem name="ProductPic">images/thermofloor/Heatit-Z-Push-button-8-white.png</MetaDataItem> |
| 10 |
<MetaDataItem name="ProductManual">https://www.thermo-floor.no/media/multicase/documents/_tfasdokumentasjon/heatit%20controls/heatit%20z-push%20button/manual_heatit%20z-push_button%204%20_fw%201.26_ver2019-a_eng.pdf</MetaDataItem> |
| 11 |
<MetaDataItem name="WakeupDescription">short press any button</MetaDataItem> |
| 12 |
<MetaDataItem name="InclusionDescription">set controller in inclusion mode press and hold down group 2 keys for 3 seconds</MetaDataItem> |
| 13 |
<MetaDataItem name="ExclusionDescription">set controller in exclusion mode press and hold down group 2 keys for 3 seconds</MetaDataItem> |
| 14 |
<MetaDataItem name="ResetDescription">press and hold down group 2 keys for more than 10 seconds use only if controller is unavailable</MetaDataItem> |
| 15 |
<MetaDataItem id="0xa306" name="ZWProductPage" type="0x0300">https://products.z-wavealliance.org/products/3595</MetaDataItem> |
| 16 |
<MetaDataItem id="0xa306" name="FrequencyName" type="0x0300">CEPT</MetaDataItem> |
| 17 |
<MetaDataItem id="0xa306" name="Identifier" type="0x0300">45 126 82 (white) 45 126 83 (black)</MetaDataItem> |
| 18 |
<ChangeLog> |
| 19 |
<Entry author="Jonas Sauge" date="26 August 2020" revision="1">add Heatit Z-Push Button 4</Entry> |
| 20 |
<Entry author="Pål Kristensen - [email protected]" date="18 January 2021" revision="2">Fixed Association Groups</Entry> |
| 21 |
</ChangeLog> |
| 22 |
</MetaData> |
| 23 |
<!-- Configuration Command Class - All Configuration Parameters should be entered into the section below --> |
| 24 |
<CommandClass id="112"> |
| 25 |
|
| 26 |
<!-- Here is a Byte/Int/Short Value Sample --> |
| 27 |
<Value genre="config" index="1" label="Factory reset" max="21930" min="21930" type="int" units="" value="0" write_only="true"> |
| 28 |
<Help> |
| 29 |
Set to 21930 to factory reset the device. |
| 30 |
</Help> |
| 31 |
</Value> |
| 32 |
</CommandClass> |
| 33 |
<!-- The Association Group Information --> |
| 34 |
<CommandClass id="133"> |
| 35 |
<Associations num_groups="3"> |
| 36 |
<Group index="1" label="LifeLine" max_associations="5"/> |
| 37 |
<Group index="2" label="Launch 1" max_associations="5"/> |
| 38 |
<Group index="3" label="Launch 2" max_associations="5"/> |
| 39 |
</Associations> |
| 40 |
</CommandClass> |
| 41 |
</Product> |