| 1 |
<Product Revision="9" xmlns="https://github.com/OpenZWave/open-zwave"> |
| 2 |
<MetaData> |
| 3 |
<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/019B:0001:0001</MetaDataItem> |
| 4 |
<MetaDataItem name="ProductPic">images/thermofloor/heatit021.png</MetaDataItem> |
| 5 |
<MetaDataItem id="0001" name="ZWProductPage" type="0001">https://products.z-wavealliance.org/products/1234/</MetaDataItem> |
| 6 |
<MetaDataItem id="0201" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/1182/</MetaDataItem> |
| 7 |
<MetaDataItem name="Description">Heatit Z-Wave is an electronic thermostat for mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that |
| 8 |
can be connected to Home Automation systems like Fibaro, Sensio, Vera, Zipato and others. |
| 9 |
The display will show the actual room temperature. By pressing the buttons, the display will show the set value. |
| 10 |
Heatit Z-Wave is equipped with a single-pole switch. |
| 11 |
The thermostat can handle loads up to 16A/3600Wat 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors. |
| 12 |
|
| 13 |
FUNCTIONS |
| 14 |
• Room sensor |
| 15 |
• Floor sensor |
| 16 |
• Temperature limiter |
| 17 |
• Power regulator |
| 18 |
• Z-Wave chip 500 series |
| 19 |
• Week program/setback temperature via gateway |
| 20 |
• Setback mode |
| 21 |
• 7-segment LCD-screen |
| 22 |
• Can be used in connection with diff erent NTC-sensors |
| 23 |
• Lock mode/child lock |
| 24 |
• Backlight |
| 25 |
• Calibration |
| 26 |
• 8 scenarios |
| 27 |
CONNECTION CLAMPS |
| 28 |
Use 1,5 mm² or 2,5 mm² cables according to power need. |
| 29 |
TECHNICAL DATA |
| 30 |
Rated voltage: 230V 50/60Hz |
| 31 |
Max. load: 3600W |
| 32 |
Max. current: 16A |
| 33 |
Power consumption: 1,5W |
| 34 |
Protection class: IP21 |
| 35 |
Min/Max installation temp: -20°C to 40°C |
| 36 |
Min/Max operating temp: 5°C to 40°C |
| 37 |
Temperature intervals: Floor sensor 5°C to 40°C |
| 38 |
Room sensor 5°C to 40°C |
| 39 |
Hysteresis: 0,5°C |
| 40 |
Sensor values: 0°C 29,1 kOhm |
| 41 |
10°C 18,6 kOhm |
| 42 |
15°C 15,1 kOhm |
| 43 |
20°C 12,2 kOhm |
| 44 |
25°C 10,0 kOhm |
| 45 |
Switch: Single-pole</MetaDataItem> |
| 46 |
<MetaDataItem name="ExclusionDescription">INCLUSION/EXCLUSION |
| 47 |
To include the thermostat to your home automation gateway, press Center (confirm) for 10 seconds. |
| 48 |
The display will show OFF. Press Right (down) 4 times till you see Con in the display. |
| 49 |
Now start add device in your home automation software. Start inclusion mode by pressing Center (confirm) for approximately |
| 50 |
2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If inclusion |
| 51 |
fails, Err (error) will appear. |
| 52 |
Leave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings.</MetaDataItem> |
| 53 |
<MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&filename=Manuals/1234/Manual_Multireg Z-Wave_Ver2015-A.pdf</MetaDataItem> |
| 54 |
<MetaDataItem id="0001" name="FrequencyName" type="0001">CEPT (Europe)</MetaDataItem> |
| 55 |
<MetaDataItem id="0201" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem> |
| 56 |
<MetaDataItem name="Name">Heatit Z-Wave</MetaDataItem> |
| 57 |
<MetaDataItem id="0001" name="Identifier" type="0001">TF021</MetaDataItem> |
| 58 |
<MetaDataItem id="0201" name="Identifier" type="0003">TF021</MetaDataItem> |
| 59 |
<MetaDataItem name="ResetDescription">FACTORY RESET - RES |
| 60 |
By pressing buttons Left and Center (up and confirm) for 20 seconds, the thermostat will perform a complete factory reset. |
| 61 |
NB! Please use this procedure only when the primary controller is missing or otherwise inoperable.</MetaDataItem> |
| 62 |
<MetaDataItem name="InclusionDescription">INCLUSION/EXCLUSION |
| 63 |
To include the thermostat to your home automation gateway, press Center (confirm) for 10 seconds. |
| 64 |
The display will show OFF. Press Right (down) 4 times till you see Con in the display. |
| 65 |
Now start add device in your home automation software. Start inclusion mode by pressing Center (confirm) for approximately |
| 66 |
2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If inclusion |
| 67 |
fails, Err (error) will appear. |
| 68 |
Leave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings.</MetaDataItem> |
| 69 |
<MetaDataItem name="WakeupDescription">If Er2 appears in the display, touch any button to restart the display.</MetaDataItem> |
| 70 |
<ChangeLog> |
| 71 |
<Entry author="Justin Hammond - [email protected]" date="08 May 2019" revision="7">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1182/xml</Entry> |
| 72 |
<Entry author="Justin Hammond - [email protected]" date="08 May 2019" revision="8">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1234/xml</Entry> |
| 73 |
<Entry author="Gunnar Skjold - [email protected]" date="15 Nov 2020" revision="9">Assigned this config to TF016 as well - https://products.z-wavealliance.org/products/1182/xml</Entry> |
| 74 |
</ChangeLog> |
| 75 |
</MetaData> |
| 76 |
<CommandClass id="64"> |
| 77 |
<Value genre="user" index="0" instance="1" label="Mode" max="0" min="0" read_only="false" size="1" type="list" units="" value="0" write_only="false"> |
| 78 |
<Item label="Off" value="0"/> |
| 79 |
<Item label="Heat (Default)" value="1"/> |
| 80 |
<Item label="Cool" value="2"/> |
| 81 |
<Item label="Energy Heat" value="11"/> |
| 82 |
</Value> |
| 83 |
<SupportedModes> |
| 84 |
<Mode index="0" label="Off"/> |
| 85 |
<Mode index="1" label="Heat"/> |
| 86 |
<Mode index="2" label="Cool"/> |
| 87 |
<Mode index="11" label="Energy Heat"/> |
| 88 |
</SupportedModes> |
| 89 |
<Compatibility/> |
| 90 |
</CommandClass> |
| 91 |
<CommandClass id="67"> |
| 92 |
<Instance index="1"/> |
| 93 |
<Value genre="user" index="1" instance="1" label="Heating" max="40" min="5" read_only="false" type="decimal" units="C" value="20" write_only="false"/> |
| 94 |
<Value genre="user" index="2" instance="1" label="Cooling" max="40" min="5" read_only="false" type="decimal" units="C" value="21" write_only="false"/> |
| 95 |
<Value genre="user" index="11" instance="1" label="Energy Heat" max="40" min="5" read_only="false" type="decimal" units="C" value="16" write_only="false"/> |
| 96 |
<Compatibility> |
| 97 |
<Base>0</Base> |
| 98 |
<CreateVars>true</CreateVars> |
| 99 |
</Compatibility> |
| 100 |
</CommandClass> |
| 101 |
<CommandClass id="112"> |
| 102 |
<Value genre="config" index="1" label="Operation mode" size="1" type="list" value="1"> |
| 103 |
<Item label="Off" value="0"/> |
| 104 |
<Item label="Heat" value="1"/> |
| 105 |
<Item label="Cool" value="2"/> |
| 106 |
<Item label="Energy save heat" value="11"/> |
| 107 |
</Value> |
| 108 |
<Value genre="config" index="2" label="Temperature sensor" size="1" type="list" value="1"> |
| 109 |
<Item label="F - Floor mode" value="0"/> |
| 110 |
<Item label="A - Room temperature mode" value="1"/> |
| 111 |
<Item label="AF - Room mode w/floor limitations" value="2"/> |
| 112 |
<Item label="A2 - Room temperature mode" value="3"/> |
| 113 |
<Item label="P - Power regulator" value="4"/> |
| 114 |
<Item label="FP - Floor mode with minimum power limitation" value="5"/> |
| 115 |
</Value> |
| 116 |
<Value genre="config" index="3" label="Floor sensor type" size="1" type="list" value="0"> |
| 117 |
<Item label="10k ntc" value="0"/> |
| 118 |
<Item label="12k ntc" value="1"/> |
| 119 |
<Item label="15k ntc" value="2"/> |
| 120 |
<Item label="22k ntc" value="3"/> |
| 121 |
<Item label="33k ntc" value="4"/> |
| 122 |
<Item label="47k ntc" value="5"/> |
| 123 |
</Value> |
| 124 |
<Value genre="config" index="4" label="DIFF l. Temperature control Hysteresis" max="30" min="3" size="2" type="short" value="5"> |
| 125 |
<Help>3-30 (0.3C - 3.0C)</Help> |
| 126 |
</Value> |
| 127 |
<Value genre="config" index="5" label="FLo: Floor min limit" max="400" min="50" size="2" type="short" value="50"> |
| 128 |
<Help>50-400 (5.0C - 40.0C)</Help> |
| 129 |
</Value> |
| 130 |
<Value genre="config" index="6" label="FHi: Floor max limit" max="400" min="50" size="2" type="short" value="400"> |
| 131 |
<Help>50-400 (5.0C - 40.0C)</Help> |
| 132 |
</Value> |
| 133 |
<Value genre="config" index="7" label="ALo: Air min limit" max="400" min="50" size="2" type="short" value="50"> |
| 134 |
<Help>50-400 (5.0C - 40.0C)</Help> |
| 135 |
</Value> |
| 136 |
<Value genre="config" index="8" label="AHi: Air max limit" max="400" min="50" size="2" type="short" value="400"> |
| 137 |
<Help>50-400 (5.0C - 40.0C)</Help> |
| 138 |
</Value> |
| 139 |
<Value genre="config" index="9" label="PLo: Min temperature in Power Reg Mode" max="9" min="0" size="1" type="byte" value="0"> |
| 140 |
<Help>0-9. Min temperature in Power Regulator Mode (setting 2. Temperature sensor - P)</Help> |
| 141 |
</Value> |
| 142 |
<Value genre="config" index="10" instance="1" label="CO mode setpoint" max="400" min="50" size="2" type="short" value="210"> |
| 143 |
<Help>50-400 (5.0C - 40.0C)</Help> |
| 144 |
</Value> |
| 145 |
<Value genre="config" index="11" instance="1" label="ECO mode setpoint" max="400" min="50" size="2" type="short" value="180"> |
| 146 |
<Help>50-400 (5.0C - 40.0C)</Help> |
| 147 |
</Value> |
| 148 |
<Value genre="config" index="12" label="P setting" max="10" min="0" size="2" type="short" value="2"> |
| 149 |
<Help>0-10</Help> |
| 150 |
</Value> |
| 151 |
<Value genre="config" index="13" instance="1" label="COOL setpoint" max="400" min="50" size="2" type="short" value="180"> |
| 152 |
<Help> |
| 153 |
Only if cooling is enabled. |
| 154 |
50-400 (5.0C - 40.0C) |
| 155 |
</Help> |
| 156 |
</Value> |
| 157 |
<Compatibility/> |
| 158 |
</CommandClass> |
| 159 |
<CommandClass id="133"> |
| 160 |
<Associations num_groups="2"> |
| 161 |
<Group index="1" label="Lifeline" max_associations="1"/> |
| 162 |
<Group index="2" label="On/Off control" max_associations="8"/> |
| 163 |
</Associations> |
| 164 |
<Compatibility/> |
| 165 |
</CommandClass> |
| 166 |
</Product> |