Debian Codegraph @

Documentation/ABI/testing/sysfs-platform-mellanox-pmc

raw
1 HID Driver Description
2 MLNXBFD0 mlxbf-pmc Performance counters (BlueField-1)
3 MLNXBFD1 mlxbf-pmc Performance counters (BlueField-2)
4 MLNXBFD2 mlxbf-pmc Performance counters (BlueField-3)
5
6 What: /sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event_list
7 Date: Dec 2020
8 KernelVersion: 5.10
9 Contact: "Shravan Kumar Ramani <[email protected]>"
10 Description:
11 List of events supported by the counters in the specific block.
12 It is used to extract the event number or ID associated with
13 each event.
14
15 What: /sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event<N>
16 Date: Dec 2020
17 KernelVersion: 5.10
18 Contact: "Shravan Kumar Ramani <[email protected]>"
19 Description:
20 Event monitored by corresponding counter. This is used to
21 program or read back the event that should be or is currently
22 being monitored by counter<N>.
23
24 What: /sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/counter<N>
25 Date: Dec 2020
26 KernelVersion: 5.10
27 Contact: "Shravan Kumar Ramani <[email protected]>"
28 Description:
29 Counter value of the event being monitored. This is used to
30 read the counter value of the event which was programmed using
31 event<N>. This is also used to clear or reset the counter value
32 by writing 0 to the counter sysfs.
33
34 What: /sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/enable
35 Date: Dec 2020
36 KernelVersion: 5.10
37 Contact: "Shravan Kumar Ramani <[email protected]>"
38 Description:
39 Start or stop counters. This is used to start the counters
40 for monitoring the programmed events and also to stop the
41 counters after the desired duration. Writing value 1 will
42 start all the counters in the block, and writing 0 will
43 stop all the counters together.
44
45 What: /sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/<reg>
46 Date: Dec 2020
47 KernelVersion: 5.10
48 Contact: "Shravan Kumar Ramani <[email protected]>"
49 Description:
50 Value of register. This is used to read or reset the registers
51 where various performance statistics are counted for each block.
52 Writing 0 to the sysfs will clear the counter, writing any other
53 value is not allowed.
54
55 What: /sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/count_clock
56 Date: Mar 2025
57 KernelVersion: 6.14
58 Contact: "Shravan Kumar Ramani <[email protected]>"
59 Description:
60 Use a counter for counting cycles. This is used to repurpose/dedicate
61 any of the counters in the block to counting cycles. Each counter is
62 represented by a bit (bit 0 for counter0, bit1 for counter1 and so on)
63 and setting the corresponding bit will reserve that specific counter
64 for counting cycles and override the event<N> setting.