| 1 |
What: /sys/bus/coresight/devices/<tpda-name>/trig_async_enable |
| 2 |
Date: December 2025 |
| 3 |
KernelVersion: 6.20 |
| 4 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 5 |
Description: |
| 6 |
(RW) Enable/disable cross trigger synchronization sequence interface. |
| 7 |
|
| 8 |
What: /sys/bus/coresight/devices/<tpda-name>/trig_flag_ts_enable |
| 9 |
Date: December 2025 |
| 10 |
KernelVersion: 6.20 |
| 11 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 12 |
Description: |
| 13 |
(RW) Enable/disable cross trigger FLAG packet request interface. |
| 14 |
|
| 15 |
What: /sys/bus/coresight/devices/<tpda-name>/trig_freq_enable |
| 16 |
Date: December 2025 |
| 17 |
KernelVersion: 6.20 |
| 18 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 19 |
Description: |
| 20 |
(RW) Enable/disable cross trigger FREQ packet request interface. |
| 21 |
|
| 22 |
What: /sys/bus/coresight/devices/<tpda-name>/freq_ts_enable |
| 23 |
Date: December 2025 |
| 24 |
KernelVersion: 6.20 |
| 25 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 26 |
Description: |
| 27 |
(RW) Enable/disable the timestamp for all FREQ packets. |
| 28 |
|
| 29 |
What: /sys/bus/coresight/devices/<tpda-name>/cmbchan_mode |
| 30 |
Date: December 2025 |
| 31 |
KernelVersion: 6.20 |
| 32 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 33 |
Description: |
| 34 |
(RW) Configure the CMB/MCMB channel mode for all enabled ports. |
| 35 |
Value 0 means raw channel mapping mode. Value 1 means channel pair marking mode. |
| 36 |
|
| 37 |
What: /sys/bus/coresight/devices/<tpda-name>/global_flush_req |
| 38 |
Date: December 2025 |
| 39 |
KernelVersion: 6.20 |
| 40 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 41 |
Description: |
| 42 |
(RW) Set global (all ports) flush request bit. The bit remains set until a |
| 43 |
global flush request sequence completes. |
| 44 |
|
| 45 |
What: /sys/bus/coresight/devices/<tpda-name>/syncr_mode |
| 46 |
Date: December 2025 |
| 47 |
KernelVersion: 6.20 |
| 48 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 49 |
Description: |
| 50 |
(RW) Set mode the of the syncr counter. |
| 51 |
mode 0 - COUNT[11:0] value represents the approximate number of bytes moved between two ASYNC packet requests |
| 52 |
mode 1 - the bits COUNT[11:7] are used as a power of 2. for example, we could insert an async packet every 8K |
| 53 |
data by writing a value 13 to the COUNT[11:7] field. |
| 54 |
|
| 55 |
What: /sys/bus/coresight/devices/<tpda-name>/syncr_count |
| 56 |
Date: December 2025 |
| 57 |
KernelVersion: 6.20 |
| 58 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 59 |
Description: |
| 60 |
(RW) Set value the of the syncr counter. |
| 61 |
Range: 0-4095 |
| 62 |
|
| 63 |
What: /sys/bus/coresight/devices/<tpda-name>/port_flush_req |
| 64 |
Date: December 2025 |
| 65 |
KernelVersion: 6.20 |
| 66 |
Contact: Jinlong Mao <[email protected]>, Tao Zhang <[email protected]>, Jie Gan <[email protected]> |
| 67 |
Description: |
| 68 |
(RW) Configure the bit i to requests a flush operation of port i on the TPDA. |
| 69 |
The requested bit(s) remain set until the flush request completes. |