Debian Codegraph @

Documentation/ABI/testing/sysfs-bus-iio-isl29501

raw
1 What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain
2 What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain_bias
3 KernelVersion: 4.18
4 Contact: [email protected]
5 Description:
6 This sensor has an automatic gain control (agc) loop
7 which sets the analog signal levels at an optimum
8 level by controlling programmable gain amplifiers. The
9 criteria for optimal gain is determined by the sensor.
10
11 Return the actual gain value as an integer in [0; 65536]
12 range when read from.
13
14 The agc gain read when measuring crosstalk shall be
15 written into in_proximity0_agc_gain_bias.
16
17 What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_a
18 What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_b
19 What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_a
20 What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_b
21 KernelVersion: 4.18
22 Contact: [email protected]
23 Description:
24 The sensor is able to perform correction of distance
25 measurements due to changing temperature and ambient
26 light conditions. It can be programmed to correct for
27 a second order error polynomial.
28
29 Phase data has to be collected when temperature and
30 ambient light are modulated independently.
31
32 Then a least squares curve fit to a second order
33 polynomial has to be generated from the data. The
34 resultant curves have the form ax^2 + bx + c.
35
36 From those two curves, a and b coefficients shall be
37 stored in in_proximity0_calib_phase_temp_a and
38 in_proximity0_calib_phase_temp_b for temperature and
39 in in_proximity0_calib_phase_light_a and
40 in_proximity0_calib_phase_light_b for ambient light.
41
42 Those values must be integer in [0; 8355840] range.
43
44 Finally, the c constant is set by the sensor
45 internally.
46
47 The value stored in sensor is displayed when read from.