| 1 |
What: /sys/class/leds/<led>/als_channel |
| 2 |
Date: May 2012 |
| 3 |
KernelVersion: 3.5 |
| 4 |
Contact: Johan Hovold <[email protected]> |
| 5 |
Description: |
| 6 |
Set the ALS output channel to use as input in |
| 7 |
ALS-current-control mode (1, 2), where: |
| 8 |
|
| 9 |
== ============ |
| 10 |
1 out_current1 |
| 11 |
2 out_current2 |
| 12 |
== ============ |
| 13 |
|
| 14 |
What: /sys/class/leds/<led>/als_en |
| 15 |
Date: May 2012 |
| 16 |
KernelVersion: 3.5 |
| 17 |
Contact: Johan Hovold <[email protected]> |
| 18 |
Description: |
| 19 |
Enable ALS-current-control mode (0, 1). |
| 20 |
|
| 21 |
What: /sys/class/leds/<led>/falltime |
| 22 |
What: /sys/class/leds/<led>/risetime |
| 23 |
Date: April 2012 |
| 24 |
KernelVersion: 3.5 |
| 25 |
Contact: Johan Hovold <[email protected]> |
| 26 |
Description: |
| 27 |
Set the pattern generator fall and rise times (0..7), where: |
| 28 |
|
| 29 |
== ======= |
| 30 |
0 2048 us |
| 31 |
1 262 ms |
| 32 |
2 524 ms |
| 33 |
3 1.049 s |
| 34 |
4 2.097 s |
| 35 |
5 4.194 s |
| 36 |
6 8.389 s |
| 37 |
7 16.78 s |
| 38 |
== ======= |
| 39 |
|
| 40 |
What: /sys/class/leds/<led>/id |
| 41 |
Date: April 2012 |
| 42 |
KernelVersion: 3.5 |
| 43 |
Contact: Johan Hovold <[email protected]> |
| 44 |
Description: |
| 45 |
Get the id of this led (0..3). |
| 46 |
|
| 47 |
What: /sys/class/leds/<led>/linear |
| 48 |
Date: April 2012 |
| 49 |
KernelVersion: 3.5 |
| 50 |
Contact: Johan Hovold <[email protected]> |
| 51 |
Description: |
| 52 |
Set the brightness-mapping mode (0, 1), where: |
| 53 |
|
| 54 |
== ================ |
| 55 |
0 exponential mode |
| 56 |
1 linear mode |
| 57 |
== ================ |
| 58 |
|
| 59 |
What: /sys/class/leds/<led>/pwm |
| 60 |
Date: April 2012 |
| 61 |
KernelVersion: 3.5 |
| 62 |
Contact: Johan Hovold <[email protected]> |
| 63 |
Description: |
| 64 |
Set the PWM-input control mask (5 bits), where: |
| 65 |
|
| 66 |
===== =========================== |
| 67 |
bit 5 PWM-input enabled in Zone 4 |
| 68 |
bit 4 PWM-input enabled in Zone 3 |
| 69 |
bit 3 PWM-input enabled in Zone 2 |
| 70 |
bit 2 PWM-input enabled in Zone 1 |
| 71 |
bit 1 PWM-input enabled in Zone 0 |
| 72 |
bit 0 PWM-input enabled |
| 73 |
===== =========================== |