| 1 |
What: /sys/bus/i2c/devices/.../bd9571mwv-regulator.*.auto/backup_mode |
| 2 |
Date: Jul 2018 |
| 3 |
KernelVersion: 4.19 |
| 4 |
Contact: Geert Uytterhoeven <[email protected]> |
| 5 |
Description: Read/write the current state of DDR Backup Mode, which controls |
| 6 |
if DDR power rails will be kept powered during system suspend. |
| 7 |
("on"/"1" = enabled, "off"/"0" = disabled). |
| 8 |
Two types of power switches (or control signals) can be used: |
| 9 |
|
| 10 |
A. With a momentary power switch (or pulse signal), DDR |
| 11 |
Backup Mode is enabled by default when available, as the |
| 12 |
PMIC will be configured only during system suspend. |
| 13 |
B. With a toggle power switch (or level signal), the |
| 14 |
following steps must be followed exactly: |
| 15 |
|
| 16 |
1. Configure PMIC for backup mode, to change the role of |
| 17 |
the accessory power switch from a power switch to a |
| 18 |
wake-up switch, |
| 19 |
2. Switch accessory power switch off, to prepare for |
| 20 |
system suspend, which is a manual step not controlled |
| 21 |
by software, |
| 22 |
3. Suspend system, |
| 23 |
4. Switch accessory power switch on, to resume the |
| 24 |
system. |
| 25 |
|
| 26 |
DDR Backup Mode must be explicitly enabled by the user, |
| 27 |
to invoke step 1. |
| 28 |
|
| 29 |
See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml. |
| 30 |
Users: User space applications for embedded boards equipped with a |
| 31 |
BD9571MWV PMIC. |