| 1 |
What: /sys/class/accel/accel<n>/device/armcp_kernel_ver |
| 2 |
Date: Jan 2019 |
| 3 |
KernelVersion: 5.1 |
| 4 |
Contact: [email protected] |
| 5 |
Description: Version of the Linux kernel running on the device's CPU. |
| 6 |
Will be DEPRECATED in Linux kernel version 5.10, and be |
| 7 |
replaced with cpucp_kernel_ver |
| 8 |
|
| 9 |
What: /sys/class/accel/accel<n>/device/armcp_ver |
| 10 |
Date: Jan 2019 |
| 11 |
KernelVersion: 5.1 |
| 12 |
Contact: [email protected] |
| 13 |
Description: Version of the application running on the device's CPU |
| 14 |
Will be DEPRECATED in Linux kernel version 5.10, and be |
| 15 |
replaced with cpucp_ver |
| 16 |
|
| 17 |
What: /sys/class/accel/accel<n>/device/clk_max_freq_mhz |
| 18 |
Date: Jun 2019 |
| 19 |
KernelVersion: 5.7 |
| 20 |
Contact: [email protected] |
| 21 |
Description: Allows the user to set the maximum clock frequency, in MHz. |
| 22 |
The device clock might be set to lower value than the maximum. |
| 23 |
The user should read the clk_cur_freq_mhz to see the actual |
| 24 |
frequency value of the device clock. This property is valid |
| 25 |
only for the Gaudi ASIC family |
| 26 |
|
| 27 |
What: /sys/class/accel/accel<n>/device/clk_cur_freq_mhz |
| 28 |
Date: Jun 2019 |
| 29 |
KernelVersion: 5.7 |
| 30 |
Contact: [email protected] |
| 31 |
Description: Displays the current frequency, in MHz, of the device clock. |
| 32 |
This property is valid only for the Gaudi ASIC family |
| 33 |
|
| 34 |
What: /sys/class/accel/accel<n>/device/cpld_ver |
| 35 |
Date: Jan 2019 |
| 36 |
KernelVersion: 5.1 |
| 37 |
Contact: [email protected] |
| 38 |
Description: Version of the Device's CPLD F/W |
| 39 |
|
| 40 |
What: /sys/class/accel/accel<n>/device/cpucp_kernel_ver |
| 41 |
Date: Oct 2020 |
| 42 |
KernelVersion: 5.10 |
| 43 |
Contact: [email protected] |
| 44 |
Description: Version of the Linux kernel running on the device's CPU |
| 45 |
|
| 46 |
What: /sys/class/accel/accel<n>/device/cpucp_ver |
| 47 |
Date: Oct 2020 |
| 48 |
KernelVersion: 5.10 |
| 49 |
Contact: [email protected] |
| 50 |
Description: Version of the application running on the device's CPU |
| 51 |
|
| 52 |
What: /sys/class/accel/accel<n>/device/device_type |
| 53 |
Date: Jan 2019 |
| 54 |
KernelVersion: 5.1 |
| 55 |
Contact: [email protected] |
| 56 |
Description: Displays the code name of the device according to its type. |
| 57 |
The supported values are: "GOYA" |
| 58 |
|
| 59 |
What: /sys/class/accel/accel<n>/device/eeprom |
| 60 |
Date: Jan 2019 |
| 61 |
KernelVersion: 5.1 |
| 62 |
Contact: [email protected] |
| 63 |
Description: A binary file attribute that contains the contents of the |
| 64 |
on-board EEPROM |
| 65 |
|
| 66 |
What: /sys/class/accel/accel<n>/device/fuse_ver |
| 67 |
Date: Jan 2019 |
| 68 |
KernelVersion: 5.1 |
| 69 |
Contact: [email protected] |
| 70 |
Description: Displays the device's version from the eFuse |
| 71 |
|
| 72 |
What: /sys/class/accel/accel<n>/device/fw_os_ver |
| 73 |
Date: Dec 2021 |
| 74 |
KernelVersion: 5.18 |
| 75 |
Contact: [email protected] |
| 76 |
Description: Version of the firmware OS running on the device's CPU |
| 77 |
|
| 78 |
What: /sys/class/accel/accel<n>/device/hard_reset |
| 79 |
Date: Jan 2019 |
| 80 |
KernelVersion: 5.1 |
| 81 |
Contact: [email protected] |
| 82 |
Description: Interface to trigger a hard-reset operation for the device. |
| 83 |
Hard-reset will reset ALL internal components of the device |
| 84 |
except for the PCI interface and the internal PLLs |
| 85 |
|
| 86 |
What: /sys/class/accel/accel<n>/device/hard_reset_cnt |
| 87 |
Date: Jan 2019 |
| 88 |
KernelVersion: 5.1 |
| 89 |
Contact: [email protected] |
| 90 |
Description: Displays how many times the device have undergone a hard-reset |
| 91 |
operation since the driver was loaded |
| 92 |
|
| 93 |
What: /sys/class/accel/accel<n>/device/high_pll |
| 94 |
Date: Jan 2019 |
| 95 |
KernelVersion: 5.1 |
| 96 |
Contact: [email protected] |
| 97 |
Description: Allows the user to set the maximum clock frequency for MME, TPC |
| 98 |
and IC when the power management profile is set to "automatic". |
| 99 |
This property is valid only for the Goya ASIC family |
| 100 |
|
| 101 |
What: /sys/class/accel/accel<n>/device/ic_clk |
| 102 |
Date: Jan 2019 |
| 103 |
KernelVersion: 5.1 |
| 104 |
Contact: [email protected] |
| 105 |
Description: Allows the user to set the maximum clock frequency, in Hz, of |
| 106 |
the Interconnect fabric. Writes to this parameter affect the |
| 107 |
device only when the power management profile is set to "manual" |
| 108 |
mode. The device IC clock might be set to lower value than the |
| 109 |
maximum. The user should read the ic_clk_curr to see the actual |
| 110 |
frequency value of the IC. This property is valid only for the |
| 111 |
Goya ASIC family |
| 112 |
|
| 113 |
What: /sys/class/accel/accel<n>/device/ic_clk_curr |
| 114 |
Date: Jan 2019 |
| 115 |
KernelVersion: 5.1 |
| 116 |
Contact: [email protected] |
| 117 |
Description: Displays the current clock frequency, in Hz, of the Interconnect |
| 118 |
fabric. This property is valid only for the Goya ASIC family |
| 119 |
|
| 120 |
What: /sys/class/accel/accel<n>/device/infineon_ver |
| 121 |
Date: Jan 2019 |
| 122 |
KernelVersion: 5.1 |
| 123 |
Contact: [email protected] |
| 124 |
Description: Version of the Device's power supply F/W code. Relevant only to GOYA and GAUDI |
| 125 |
|
| 126 |
What: /sys/class/accel/accel<n>/device/max_power |
| 127 |
Date: Jan 2019 |
| 128 |
KernelVersion: 5.1 |
| 129 |
Contact: [email protected] |
| 130 |
Description: Allows the user to set the maximum power consumption of the |
| 131 |
device in milliwatts. |
| 132 |
|
| 133 |
What: /sys/class/accel/accel<n>/device/mme_clk |
| 134 |
Date: Jan 2019 |
| 135 |
KernelVersion: 5.1 |
| 136 |
Contact: [email protected] |
| 137 |
Description: Allows the user to set the maximum clock frequency, in Hz, of |
| 138 |
the MME compute engine. Writes to this parameter affect the |
| 139 |
device only when the power management profile is set to "manual" |
| 140 |
mode. The device MME clock might be set to lower value than the |
| 141 |
maximum. The user should read the mme_clk_curr to see the actual |
| 142 |
frequency value of the MME. This property is valid only for the |
| 143 |
Goya ASIC family |
| 144 |
|
| 145 |
What: /sys/class/accel/accel<n>/device/mme_clk_curr |
| 146 |
Date: Jan 2019 |
| 147 |
KernelVersion: 5.1 |
| 148 |
Contact: [email protected] |
| 149 |
Description: Displays the current clock frequency, in Hz, of the MME compute |
| 150 |
engine. This property is valid only for the Goya ASIC family |
| 151 |
|
| 152 |
What: /sys/class/accel/accel<n>/device/module_id |
| 153 |
Date: Nov 2023 |
| 154 |
KernelVersion: not yet upstreamed |
| 155 |
Contact: [email protected] |
| 156 |
Description: Displays the device's module id |
| 157 |
|
| 158 |
What: /sys/class/accel/accel<n>/device/parent_device |
| 159 |
Date: Nov 2023 |
| 160 |
KernelVersion: 6.8 |
| 161 |
Contact: [email protected] |
| 162 |
Description: Displays the name of the parent device of the accel device |
| 163 |
|
| 164 |
What: /sys/class/accel/accel<n>/device/pci_addr |
| 165 |
Date: Jan 2019 |
| 166 |
KernelVersion: 5.1 |
| 167 |
Contact: [email protected] |
| 168 |
Description: Displays the PCI address of the device. This is needed so the |
| 169 |
user would be able to open a device based on its PCI address |
| 170 |
|
| 171 |
What: /sys/class/accel/accel<n>/device/pm_mng_profile |
| 172 |
Date: Jan 2019 |
| 173 |
KernelVersion: 5.1 |
| 174 |
Contact: [email protected] |
| 175 |
Description: Power management profile. Values are "auto", "manual". In "auto" |
| 176 |
mode, the driver will set the maximum clock frequency to a high |
| 177 |
value when a user-space process opens the device's file (unless |
| 178 |
it was already opened by another process). The driver will set |
| 179 |
the max clock frequency to a low value when there are no user |
| 180 |
processes that are opened on the device's file. In "manual" |
| 181 |
mode, the user sets the maximum clock frequency by writing to |
| 182 |
ic_clk, mme_clk and tpc_clk. This property is valid only for |
| 183 |
the Goya ASIC family |
| 184 |
|
| 185 |
What: /sys/class/accel/accel<n>/device/preboot_btl_ver |
| 186 |
Date: Jan 2019 |
| 187 |
KernelVersion: 5.1 |
| 188 |
Contact: [email protected] |
| 189 |
Description: Version of the device's preboot F/W code |
| 190 |
|
| 191 |
What: /sys/class/accel/accel<n>/device/security_enabled |
| 192 |
Date: Oct 2022 |
| 193 |
KernelVersion: 6.1 |
| 194 |
Contact: [email protected] |
| 195 |
Description: Displays the device's security status |
| 196 |
|
| 197 |
What: /sys/class/accel/accel<n>/device/soft_reset |
| 198 |
Date: Jan 2019 |
| 199 |
KernelVersion: 5.1 |
| 200 |
Contact: [email protected] |
| 201 |
Description: Interface to trigger a soft-reset operation for the device. |
| 202 |
Soft-reset will reset only the compute and DMA engines of the |
| 203 |
device |
| 204 |
|
| 205 |
What: /sys/class/accel/accel<n>/device/soft_reset_cnt |
| 206 |
Date: Jan 2019 |
| 207 |
KernelVersion: 5.1 |
| 208 |
Contact: [email protected] |
| 209 |
Description: Displays how many times the device have undergone a soft-reset |
| 210 |
operation since the driver was loaded |
| 211 |
|
| 212 |
What: /sys/class/accel/accel<n>/device/status |
| 213 |
Date: Jan 2019 |
| 214 |
KernelVersion: 5.1 |
| 215 |
Contact: [email protected] |
| 216 |
Description: Status of the card: |
| 217 |
|
| 218 |
* "operational" - Device is available for work. |
| 219 |
* "in reset" - Device is going through reset, will be |
| 220 |
available shortly. |
| 221 |
* "disabled" - Device is not usable. |
| 222 |
* "needs reset" - Device is not usable until a hard reset |
| 223 |
is initiated. |
| 224 |
* "in device creation" - Device is not available yet, as it |
| 225 |
is still initializing. |
| 226 |
* "in reset after device release" - Device is going through |
| 227 |
a compute-reset which is executed after a device release |
| 228 |
(relevant for Gaudi2 only). |
| 229 |
|
| 230 |
What: /sys/class/accel/accel<n>/device/thermal_ver |
| 231 |
Date: Jan 2019 |
| 232 |
KernelVersion: 5.1 |
| 233 |
Contact: [email protected] |
| 234 |
Description: Version of the Device's thermal daemon |
| 235 |
|
| 236 |
What: /sys/class/accel/accel<n>/device/tpc_clk |
| 237 |
Date: Jan 2019 |
| 238 |
KernelVersion: 5.1 |
| 239 |
Contact: [email protected] |
| 240 |
Description: Allows the user to set the maximum clock frequency, in Hz, of |
| 241 |
the TPC compute engines. Writes to this parameter affect the |
| 242 |
device only when the power management profile is set to "manual" |
| 243 |
mode. The device TPC clock might be set to lower value than the |
| 244 |
maximum. The user should read the tpc_clk_curr to see the actual |
| 245 |
frequency value of the TPC. This property is valid only for |
| 246 |
Goya ASIC family |
| 247 |
|
| 248 |
What: /sys/class/accel/accel<n>/device/tpc_clk_curr |
| 249 |
Date: Jan 2019 |
| 250 |
KernelVersion: 5.1 |
| 251 |
Contact: [email protected] |
| 252 |
Description: Displays the current clock frequency, in Hz, of the TPC compute |
| 253 |
engines. This property is valid only for the Goya ASIC family |
| 254 |
|
| 255 |
What: /sys/class/accel/accel<n>/device/uboot_ver |
| 256 |
Date: Jan 2019 |
| 257 |
KernelVersion: 5.1 |
| 258 |
Contact: [email protected] |
| 259 |
Description: Version of the u-boot running on the device's CPU |
| 260 |
|
| 261 |
What: /sys/class/accel/accel<n>/device/vrm_ver |
| 262 |
Date: Jan 2022 |
| 263 |
KernelVersion: 5.17 |
| 264 |
Contact: [email protected] |
| 265 |
Description: Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI |