| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Ralink RT288x SoC PCI register definitions |
| 4 |
* |
| 5 |
* Copyright (C) 2009 John Crispin <[email protected]> |
| 6 |
* Copyright (C) 2009 Gabor Juhos <[email protected]> |
| 7 |
* |
| 8 |
* Parts of this file are based on Ralink's 2.6.21 BSP |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/delay.h> |
| 12 |
#include <linux/types.h> |
| 13 |
#include <linux/pci.h> |
| 14 |
#include <linux/io.h> |
| 15 |
#include <linux/init.h> |
| 16 |
#include <linux/mod_devicetable.h> |
| 17 |
#include <linux/platform_device.h> |
| 18 |
|
| 19 |
#include <asm/mach-ralink/rt288x.h> |
| 20 |
|
| 21 |
#define RT2880_PCI_BASE 0x00440000 |
| 22 |
#define RT288X_CPU_IRQ_PCI 4 |
| 23 |
|
| 24 |
#define RT2880_PCI_MEM_BASE 0x20000000 |
| 25 |
#define RT2880_PCI_MEM_SIZE 0x10000000 |
| 26 |
#define RT2880_PCI_IO_BASE 0x00460000 |
| 27 |
#define RT2880_PCI_IO_SIZE 0x00010000 |
| 28 |
|
| 29 |
#define RT2880_PCI_REG_PCICFG_ADDR 0x00 |
| 30 |
#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c |
| 31 |
#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10 |
| 32 |
#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18 |
| 33 |
#define RT2880_PCI_REG_CONFIG_ADDR 0x20 |
| 34 |
#define RT2880_PCI_REG_CONFIG_DATA 0x24 |
| 35 |
#define RT2880_PCI_REG_MEMBASE 0x28 |
| 36 |
#define RT2880_PCI_REG_IOBASE 0x2c |
| 37 |
#define RT2880_PCI_REG_ID 0x30 |
| 38 |
#define RT2880_PCI_REG_CLASS 0x34 |
| 39 |
#define RT2880_PCI_REG_SUBID 0x38 |
| 40 |
#define RT2880_PCI_REG_ARBCTL 0x80 |
| 41 |
|
| 42 |
static void __iomem *rt2880_pci_base; |
| 43 |
|
| 44 |
static u32 rt2880_pci_reg_read(u32 reg) |
| 45 |
{ |
| 46 |
return readl(rt2880_pci_base + reg); |
| 47 |
} |
| 48 |
|
| 49 |
static void rt2880_pci_reg_write(u32 val, u32 reg) |
| 50 |
{ |
| 51 |
writel(val, rt2880_pci_base + reg); |
| 52 |
} |
| 53 |
|
| 54 |
static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot, |
| 55 |
unsigned int func, unsigned int where) |
| 56 |
{ |
| 57 |
return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | |
| 58 |
0x80000000); |
| 59 |
} |
| 60 |
|
| 61 |
static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn, |
| 62 |
int where, int size, u32 *val) |
| 63 |
{ |
| 64 |
u32 address; |
| 65 |
u32 data; |
| 66 |
|
| 67 |
address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), |
| 68 |
PCI_FUNC(devfn), where); |
| 69 |
|
| 70 |
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); |
| 71 |
data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); |
| 72 |
|
| 73 |
switch (size) { |
| 74 |
case 1: |
| 75 |
*val = (data >> ((where & 3) << 3)) & 0xff; |
| 76 |
break; |
| 77 |
case 2: |
| 78 |
*val = (data >> ((where & 3) << 3)) & 0xffff; |
| 79 |
break; |
| 80 |
case 4: |
| 81 |
*val = data; |
| 82 |
break; |
| 83 |
} |
| 84 |
|
| 85 |
return PCIBIOS_SUCCESSFUL; |
| 86 |
} |
| 87 |
|
| 88 |
static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn, |
| 89 |
int where, int size, u32 val) |
| 90 |
{ |
| 91 |
u32 address; |
| 92 |
u32 data; |
| 93 |
|
| 94 |
address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), |
| 95 |
PCI_FUNC(devfn), where); |
| 96 |
|
| 97 |
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); |
| 98 |
data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); |
| 99 |
|
| 100 |
switch (size) { |
| 101 |
case 1: |
| 102 |
data = (data & ~(0xff << ((where & 3) << 3))) | |
| 103 |
(val << ((where & 3) << 3)); |
| 104 |
break; |
| 105 |
case 2: |
| 106 |
data = (data & ~(0xffff << ((where & 3) << 3))) | |
| 107 |
(val << ((where & 3) << 3)); |
| 108 |
break; |
| 109 |
case 4: |
| 110 |
data = val; |
| 111 |
break; |
| 112 |
} |
| 113 |
|
| 114 |
rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA); |
| 115 |
|
| 116 |
return PCIBIOS_SUCCESSFUL; |
| 117 |
} |
| 118 |
|
| 119 |
static struct pci_ops rt2880_pci_ops = { |
| 120 |
.read = rt2880_pci_config_read, |
| 121 |
.write = rt2880_pci_config_write, |
| 122 |
}; |
| 123 |
|
| 124 |
static struct resource rt2880_pci_mem_resource = { |
| 125 |
.name = "PCI MEM space", |
| 126 |
.start = RT2880_PCI_MEM_BASE, |
| 127 |
.end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1, |
| 128 |
.flags = IORESOURCE_MEM, |
| 129 |
}; |
| 130 |
|
| 131 |
static struct resource rt2880_pci_io_resource = { |
| 132 |
.name = "PCI IO space", |
| 133 |
.start = RT2880_PCI_IO_BASE, |
| 134 |
.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1, |
| 135 |
.flags = IORESOURCE_IO, |
| 136 |
}; |
| 137 |
|
| 138 |
static struct pci_controller rt2880_pci_controller = { |
| 139 |
.pci_ops = &rt2880_pci_ops, |
| 140 |
.mem_resource = &rt2880_pci_mem_resource, |
| 141 |
.io_resource = &rt2880_pci_io_resource, |
| 142 |
}; |
| 143 |
|
| 144 |
static inline u32 rt2880_pci_read_u32(unsigned long reg) |
| 145 |
{ |
| 146 |
u32 address; |
| 147 |
u32 ret; |
| 148 |
|
| 149 |
address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); |
| 150 |
|
| 151 |
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); |
| 152 |
ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); |
| 153 |
|
| 154 |
return ret; |
| 155 |
} |
| 156 |
|
| 157 |
static inline void rt2880_pci_write_u32(unsigned long reg, u32 val) |
| 158 |
{ |
| 159 |
u32 address; |
| 160 |
|
| 161 |
address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); |
| 162 |
|
| 163 |
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); |
| 164 |
rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA); |
| 165 |
} |
| 166 |
|
| 167 |
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| 168 |
{ |
| 169 |
int irq = -1; |
| 170 |
|
| 171 |
if (dev->bus->number != 0) |
| 172 |
return irq; |
| 173 |
|
| 174 |
switch (PCI_SLOT(dev->devfn)) { |
| 175 |
case 0x00: |
| 176 |
break; |
| 177 |
case 0x11: |
| 178 |
irq = RT288X_CPU_IRQ_PCI; |
| 179 |
break; |
| 180 |
default: |
| 181 |
pr_err("%s:%s[%d] trying to alloc unknown pci irq\n", |
| 182 |
__FILE__, __func__, __LINE__); |
| 183 |
BUG(); |
| 184 |
break; |
| 185 |
} |
| 186 |
|
| 187 |
return irq; |
| 188 |
} |
| 189 |
|
| 190 |
static int rt288x_pci_probe(struct platform_device *pdev) |
| 191 |
{ |
| 192 |
void __iomem *io_map_base; |
| 193 |
|
| 194 |
rt2880_pci_base = ioremap(RT2880_PCI_BASE, PAGE_SIZE); |
| 195 |
|
| 196 |
io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE); |
| 197 |
rt2880_pci_controller.io_map_base = (unsigned long) io_map_base; |
| 198 |
set_io_port_base((unsigned long) io_map_base); |
| 199 |
|
| 200 |
ioport_resource.start = RT2880_PCI_IO_BASE; |
| 201 |
ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1; |
| 202 |
|
| 203 |
rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR); |
| 204 |
udelay(1); |
| 205 |
|
| 206 |
rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL); |
| 207 |
rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR); |
| 208 |
rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE); |
| 209 |
rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE); |
| 210 |
rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR); |
| 211 |
rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID); |
| 212 |
rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS); |
| 213 |
rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID); |
| 214 |
rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR); |
| 215 |
|
| 216 |
rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); |
| 217 |
(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); |
| 218 |
|
| 219 |
rt2880_pci_controller.of_node = pdev->dev.of_node; |
| 220 |
|
| 221 |
register_pci_controller(&rt2880_pci_controller); |
| 222 |
return 0; |
| 223 |
} |
| 224 |
|
| 225 |
int pcibios_plat_dev_init(struct pci_dev *dev) |
| 226 |
{ |
| 227 |
static bool slot0_init; |
| 228 |
|
| 229 |
/* |
| 230 |
* Nobody seems to initialize slot 0, but this platform requires it, so |
| 231 |
* do it once when some other slot is being enabled. The PCI subsystem |
| 232 |
* should configure other slots properly, so no need to do anything |
| 233 |
* special for those. |
| 234 |
*/ |
| 235 |
if (!slot0_init && dev->bus->number == 0) { |
| 236 |
u16 cmd; |
| 237 |
u32 bar0; |
| 238 |
|
| 239 |
slot0_init = true; |
| 240 |
|
| 241 |
pci_bus_write_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0, |
| 242 |
0x08000000); |
| 243 |
pci_bus_read_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0, |
| 244 |
&bar0); |
| 245 |
|
| 246 |
pci_bus_read_config_word(dev->bus, 0, PCI_COMMAND, &cmd); |
| 247 |
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; |
| 248 |
pci_bus_write_config_word(dev->bus, 0, PCI_COMMAND, cmd); |
| 249 |
} |
| 250 |
|
| 251 |
return 0; |
| 252 |
} |
| 253 |
|
| 254 |
static const struct of_device_id rt288x_pci_match[] = { |
| 255 |
{ .compatible = "ralink,rt288x-pci" }, |
| 256 |
{}, |
| 257 |
}; |
| 258 |
|
| 259 |
static struct platform_driver rt288x_pci_driver = { |
| 260 |
.probe = rt288x_pci_probe, |
| 261 |
.driver = { |
| 262 |
.name = "rt288x-pci", |
| 263 |
.of_match_table = rt288x_pci_match, |
| 264 |
}, |
| 265 |
}; |
| 266 |
|
| 267 |
static int __init pcibios_init(void) |
| 268 |
{ |
| 269 |
int ret = platform_driver_register(&rt288x_pci_driver); |
| 270 |
|
| 271 |
if (ret) |
| 272 |
pr_info("rt288x-pci: Error registering platform driver!"); |
| 273 |
|
| 274 |
return ret; |
| 275 |
} |
| 276 |
|
| 277 |
arch_initcall(pcibios_init); |