| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved. |
| 4 |
* Author: Maciej W. Rozycki <[email protected]> |
| 5 |
* Copyright (C) 2018 Maciej W. Rozycki |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/dma-mapping.h> |
| 9 |
#include <linux/pci.h> |
| 10 |
|
| 11 |
/* |
| 12 |
* Set the BCM1250, etc. PCI host bridge's TRDY timeout |
| 13 |
* to the finite max. |
| 14 |
*/ |
| 15 |
static void quirk_sb1250_pci(struct pci_dev *dev) |
| 16 |
{ |
| 17 |
pci_write_config_byte(dev, 0x40, 0xff); |
| 18 |
} |
| 19 |
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, |
| 20 |
quirk_sb1250_pci); |
| 21 |
|
| 22 |
/* |
| 23 |
* The BCM1250, etc. PCI host bridge does not support DAC on its 32-bit |
| 24 |
* bus, so we set the bus's DMA limit accordingly. However the HT link |
| 25 |
* down the artificial PCI-HT bridge supports 40-bit addressing and the |
| 26 |
* SP1011 HT-PCI bridge downstream supports both DAC and a 64-bit bus |
| 27 |
* width, so we record the PCI-HT bridge's secondary and subordinate bus |
| 28 |
* numbers and do not set the limit for devices present in the inclusive |
| 29 |
* range of those. |
| 30 |
*/ |
| 31 |
struct sb1250_bus_dma_limit_exclude { |
| 32 |
bool set; |
| 33 |
unsigned char start; |
| 34 |
unsigned char end; |
| 35 |
}; |
| 36 |
|
| 37 |
static int sb1250_bus_dma_limit(struct pci_dev *dev, void *data) |
| 38 |
{ |
| 39 |
struct sb1250_bus_dma_limit_exclude *exclude = data; |
| 40 |
bool exclude_this; |
| 41 |
bool ht_bridge; |
| 42 |
|
| 43 |
exclude_this = exclude->set && (dev->bus->number >= exclude->start && |
| 44 |
dev->bus->number <= exclude->end); |
| 45 |
ht_bridge = !exclude->set && (dev->vendor == PCI_VENDOR_ID_SIBYTE && |
| 46 |
dev->device == PCI_DEVICE_ID_BCM1250_HT); |
| 47 |
|
| 48 |
if (exclude_this) { |
| 49 |
dev_dbg(&dev->dev, "not disabling DAC for device"); |
| 50 |
} else if (ht_bridge) { |
| 51 |
exclude->start = dev->subordinate->number; |
| 52 |
exclude->end = pci_bus_max_busnr(dev->subordinate); |
| 53 |
exclude->set = true; |
| 54 |
dev_dbg(&dev->dev, "not disabling DAC for [bus %02x-%02x]", |
| 55 |
exclude->start, exclude->end); |
| 56 |
} else { |
| 57 |
dev_dbg(&dev->dev, "disabling DAC for device"); |
| 58 |
dev->dev.bus_dma_limit = DMA_BIT_MASK(32); |
| 59 |
} |
| 60 |
|
| 61 |
return 0; |
| 62 |
} |
| 63 |
|
| 64 |
static void quirk_sb1250_pci_dac(struct pci_dev *dev) |
| 65 |
{ |
| 66 |
struct sb1250_bus_dma_limit_exclude exclude = { .set = false }; |
| 67 |
|
| 68 |
pci_walk_bus(dev->bus, sb1250_bus_dma_limit, &exclude); |
| 69 |
} |
| 70 |
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, |
| 71 |
quirk_sb1250_pci_dac); |
| 72 |
|
| 73 |
/* |
| 74 |
* The BCM1250, etc. PCI/HT bridge reports as a host bridge. |
| 75 |
*/ |
| 76 |
static void quirk_sb1250_ht(struct pci_dev *dev) |
| 77 |
{ |
| 78 |
dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; |
| 79 |
} |
| 80 |
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT, |
| 81 |
quirk_sb1250_ht); |
| 82 |
|
| 83 |
/* |
| 84 |
* Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max. |
| 85 |
*/ |
| 86 |
static void quirk_sp1011(struct pci_dev *dev) |
| 87 |
{ |
| 88 |
pci_write_config_byte(dev, 0x64, 0xff); |
| 89 |
} |
| 90 |
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIPACKETS, PCI_DEVICE_ID_SP1011, |
| 91 |
quirk_sp1011); |