| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Alchemy PCI host mode support. |
| 4 |
* |
| 5 |
* Copyright 2001-2003, 2007-2008 MontaVista Software Inc. |
| 6 |
* Author: MontaVista Software, Inc. <[email protected]> |
| 7 |
* |
| 8 |
* Support for all devices (greater than 16) added by David Gathright. |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/clk.h> |
| 12 |
#include <linux/export.h> |
| 13 |
#include <linux/types.h> |
| 14 |
#include <linux/pci.h> |
| 15 |
#include <linux/platform_device.h> |
| 16 |
#include <linux/kernel.h> |
| 17 |
#include <linux/init.h> |
| 18 |
#include <linux/syscore_ops.h> |
| 19 |
#include <linux/vmalloc.h> |
| 20 |
#include <linux/dma-map-ops.h> /* for dma_default_coherent */ |
| 21 |
|
| 22 |
#include <asm/mach-au1x00/au1000.h> |
| 23 |
#include <asm/tlbmisc.h> |
| 24 |
|
| 25 |
#ifdef CONFIG_PCI_DEBUG |
| 26 |
#define DBG(x...) printk(KERN_DEBUG x) |
| 27 |
#else |
| 28 |
#define DBG(x...) do {} while (0) |
| 29 |
#endif |
| 30 |
|
| 31 |
#define PCI_ACCESS_READ 0 |
| 32 |
#define PCI_ACCESS_WRITE 1 |
| 33 |
|
| 34 |
struct alchemy_pci_context { |
| 35 |
struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ |
| 36 |
void __iomem *regs; /* ctrl base */ |
| 37 |
/* tools for wired entry for config space access */ |
| 38 |
unsigned long last_elo0; |
| 39 |
unsigned long last_elo1; |
| 40 |
int wired_entry; |
| 41 |
struct vm_struct *pci_cfg_vm; |
| 42 |
|
| 43 |
unsigned long pm[12]; |
| 44 |
|
| 45 |
int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); |
| 46 |
int (*board_pci_idsel)(unsigned int devsel, int assert); |
| 47 |
}; |
| 48 |
|
| 49 |
/* for syscore_ops. There's only one PCI controller on Alchemy chips, so this |
| 50 |
* should suffice for now. |
| 51 |
*/ |
| 52 |
static struct alchemy_pci_context *__alchemy_pci_ctx; |
| 53 |
|
| 54 |
|
| 55 |
/* IO/MEM resources for PCI. Keep the memres in sync with fixup_bigphys_addr |
| 56 |
* in arch/mips/alchemy/common/setup.c |
| 57 |
*/ |
| 58 |
static struct resource alchemy_pci_def_memres = { |
| 59 |
.start = ALCHEMY_PCI_MEMWIN_START, |
| 60 |
.end = ALCHEMY_PCI_MEMWIN_END, |
| 61 |
.name = "PCI memory space", |
| 62 |
.flags = IORESOURCE_MEM |
| 63 |
}; |
| 64 |
|
| 65 |
static struct resource alchemy_pci_def_iores = { |
| 66 |
.start = ALCHEMY_PCI_IOWIN_START, |
| 67 |
.end = ALCHEMY_PCI_IOWIN_END, |
| 68 |
.name = "PCI IO space", |
| 69 |
.flags = IORESOURCE_IO |
| 70 |
}; |
| 71 |
|
| 72 |
static void mod_wired_entry(int entry, unsigned long entrylo0, |
| 73 |
unsigned long entrylo1, unsigned long entryhi, |
| 74 |
unsigned long pagemask) |
| 75 |
{ |
| 76 |
unsigned long old_pagemask; |
| 77 |
unsigned long old_ctx; |
| 78 |
|
| 79 |
/* Save old context and create impossible VPN2 value */ |
| 80 |
old_ctx = read_c0_entryhi() & MIPS_ENTRYHI_ASID; |
| 81 |
old_pagemask = read_c0_pagemask(); |
| 82 |
write_c0_index(entry); |
| 83 |
write_c0_pagemask(pagemask); |
| 84 |
write_c0_entryhi(entryhi); |
| 85 |
write_c0_entrylo0(entrylo0); |
| 86 |
write_c0_entrylo1(entrylo1); |
| 87 |
tlb_write_indexed(); |
| 88 |
write_c0_entryhi(old_ctx); |
| 89 |
write_c0_pagemask(old_pagemask); |
| 90 |
} |
| 91 |
|
| 92 |
static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx) |
| 93 |
{ |
| 94 |
ctx->wired_entry = read_c0_wired(); |
| 95 |
add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); |
| 96 |
ctx->last_elo0 = ctx->last_elo1 = ~0; |
| 97 |
} |
| 98 |
|
| 99 |
static int config_access(unsigned char access_type, struct pci_bus *bus, |
| 100 |
unsigned int dev_fn, unsigned char where, u32 *data) |
| 101 |
{ |
| 102 |
struct alchemy_pci_context *ctx = bus->sysdata; |
| 103 |
unsigned int device = PCI_SLOT(dev_fn); |
| 104 |
unsigned int function = PCI_FUNC(dev_fn); |
| 105 |
unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r; |
| 106 |
int error = PCIBIOS_SUCCESSFUL; |
| 107 |
|
| 108 |
if (device > 19) { |
| 109 |
*data = 0xffffffff; |
| 110 |
return -1; |
| 111 |
} |
| 112 |
|
| 113 |
local_irq_save(flags); |
| 114 |
r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff; |
| 115 |
r |= PCI_STATCMD_STATUS(0x2000); |
| 116 |
__raw_writel(r, ctx->regs + PCI_REG_STATCMD); |
| 117 |
wmb(); |
| 118 |
|
| 119 |
/* Allow board vendors to implement their own off-chip IDSEL. |
| 120 |
* If it doesn't succeed, may as well bail out at this point. |
| 121 |
*/ |
| 122 |
if (ctx->board_pci_idsel(device, 1) == 0) { |
| 123 |
*data = 0xffffffff; |
| 124 |
local_irq_restore(flags); |
| 125 |
return -1; |
| 126 |
} |
| 127 |
|
| 128 |
/* Setup the config window */ |
| 129 |
if (bus->number == 0) |
| 130 |
cfg_base = (1 << device) << 11; |
| 131 |
else |
| 132 |
cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); |
| 133 |
|
| 134 |
/* Setup the lower bits of the 36-bit address */ |
| 135 |
offset = (function << 8) | (where & ~0x3); |
| 136 |
/* Pick up any address that falls below the page mask */ |
| 137 |
offset |= cfg_base & ~PAGE_MASK; |
| 138 |
|
| 139 |
/* Page boundary */ |
| 140 |
cfg_base = cfg_base & PAGE_MASK; |
| 141 |
|
| 142 |
/* To improve performance, if the current device is the same as |
| 143 |
* the last device accessed, we don't touch the TLB. |
| 144 |
*/ |
| 145 |
entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; |
| 146 |
entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; |
| 147 |
if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) { |
| 148 |
mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1, |
| 149 |
(unsigned long)ctx->pci_cfg_vm->addr, PM_4K); |
| 150 |
ctx->last_elo0 = entryLo0; |
| 151 |
ctx->last_elo1 = entryLo1; |
| 152 |
} |
| 153 |
|
| 154 |
if (access_type == PCI_ACCESS_WRITE) |
| 155 |
__raw_writel(*data, ctx->pci_cfg_vm->addr + offset); |
| 156 |
else |
| 157 |
*data = __raw_readl(ctx->pci_cfg_vm->addr + offset); |
| 158 |
wmb(); |
| 159 |
|
| 160 |
DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n", |
| 161 |
access_type, bus->number, device, where, *data, offset); |
| 162 |
|
| 163 |
/* check for errors, master abort */ |
| 164 |
status = __raw_readl(ctx->regs + PCI_REG_STATCMD); |
| 165 |
if (status & (1 << 29)) { |
| 166 |
*data = 0xffffffff; |
| 167 |
error = -1; |
| 168 |
DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n", |
| 169 |
access_type, bus->number, device); |
| 170 |
} else if ((status >> 28) & 0xf) { |
| 171 |
DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", |
| 172 |
device, (status >> 28) & 0xf); |
| 173 |
|
| 174 |
/* clear errors */ |
| 175 |
__raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD); |
| 176 |
|
| 177 |
*data = 0xffffffff; |
| 178 |
error = -1; |
| 179 |
} |
| 180 |
|
| 181 |
/* Take away the IDSEL. */ |
| 182 |
(void)ctx->board_pci_idsel(device, 0); |
| 183 |
|
| 184 |
local_irq_restore(flags); |
| 185 |
return error; |
| 186 |
} |
| 187 |
|
| 188 |
static int read_config_byte(struct pci_bus *bus, unsigned int devfn, |
| 189 |
int where, u8 *val) |
| 190 |
{ |
| 191 |
u32 data; |
| 192 |
int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); |
| 193 |
|
| 194 |
if (where & 1) |
| 195 |
data >>= 8; |
| 196 |
if (where & 2) |
| 197 |
data >>= 16; |
| 198 |
*val = data & 0xff; |
| 199 |
return ret; |
| 200 |
} |
| 201 |
|
| 202 |
static int read_config_word(struct pci_bus *bus, unsigned int devfn, |
| 203 |
int where, u16 *val) |
| 204 |
{ |
| 205 |
u32 data; |
| 206 |
int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); |
| 207 |
|
| 208 |
if (where & 2) |
| 209 |
data >>= 16; |
| 210 |
*val = data & 0xffff; |
| 211 |
return ret; |
| 212 |
} |
| 213 |
|
| 214 |
static int read_config_dword(struct pci_bus *bus, unsigned int devfn, |
| 215 |
int where, u32 *val) |
| 216 |
{ |
| 217 |
return config_access(PCI_ACCESS_READ, bus, devfn, where, val); |
| 218 |
} |
| 219 |
|
| 220 |
static int write_config_byte(struct pci_bus *bus, unsigned int devfn, |
| 221 |
int where, u8 val) |
| 222 |
{ |
| 223 |
u32 data = 0; |
| 224 |
|
| 225 |
if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) |
| 226 |
return -1; |
| 227 |
|
| 228 |
data = (data & ~(0xff << ((where & 3) << 3))) | |
| 229 |
(val << ((where & 3) << 3)); |
| 230 |
|
| 231 |
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) |
| 232 |
return -1; |
| 233 |
|
| 234 |
return PCIBIOS_SUCCESSFUL; |
| 235 |
} |
| 236 |
|
| 237 |
static int write_config_word(struct pci_bus *bus, unsigned int devfn, |
| 238 |
int where, u16 val) |
| 239 |
{ |
| 240 |
u32 data = 0; |
| 241 |
|
| 242 |
if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) |
| 243 |
return -1; |
| 244 |
|
| 245 |
data = (data & ~(0xffff << ((where & 3) << 3))) | |
| 246 |
(val << ((where & 3) << 3)); |
| 247 |
|
| 248 |
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) |
| 249 |
return -1; |
| 250 |
|
| 251 |
return PCIBIOS_SUCCESSFUL; |
| 252 |
} |
| 253 |
|
| 254 |
static int write_config_dword(struct pci_bus *bus, unsigned int devfn, |
| 255 |
int where, u32 val) |
| 256 |
{ |
| 257 |
return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val); |
| 258 |
} |
| 259 |
|
| 260 |
static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn, |
| 261 |
int where, int size, u32 *val) |
| 262 |
{ |
| 263 |
switch (size) { |
| 264 |
case 1: { |
| 265 |
u8 _val; |
| 266 |
int rc = read_config_byte(bus, devfn, where, &_val); |
| 267 |
|
| 268 |
*val = _val; |
| 269 |
return rc; |
| 270 |
} |
| 271 |
case 2: { |
| 272 |
u16 _val; |
| 273 |
int rc = read_config_word(bus, devfn, where, &_val); |
| 274 |
|
| 275 |
*val = _val; |
| 276 |
return rc; |
| 277 |
} |
| 278 |
default: |
| 279 |
return read_config_dword(bus, devfn, where, val); |
| 280 |
} |
| 281 |
} |
| 282 |
|
| 283 |
static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn, |
| 284 |
int where, int size, u32 val) |
| 285 |
{ |
| 286 |
switch (size) { |
| 287 |
case 1: |
| 288 |
return write_config_byte(bus, devfn, where, (u8) val); |
| 289 |
case 2: |
| 290 |
return write_config_word(bus, devfn, where, (u16) val); |
| 291 |
default: |
| 292 |
return write_config_dword(bus, devfn, where, val); |
| 293 |
} |
| 294 |
} |
| 295 |
|
| 296 |
static struct pci_ops alchemy_pci_ops = { |
| 297 |
.read = alchemy_pci_read, |
| 298 |
.write = alchemy_pci_write, |
| 299 |
}; |
| 300 |
|
| 301 |
static int alchemy_pci_def_idsel(unsigned int devsel, int assert) |
| 302 |
{ |
| 303 |
return 1; /* success */ |
| 304 |
} |
| 305 |
|
| 306 |
/* save PCI controller register contents. */ |
| 307 |
static int alchemy_pci_suspend(void *data) |
| 308 |
{ |
| 309 |
struct alchemy_pci_context *ctx = __alchemy_pci_ctx; |
| 310 |
if (!ctx) |
| 311 |
return 0; |
| 312 |
|
| 313 |
ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); |
| 314 |
ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; |
| 315 |
ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); |
| 316 |
ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); |
| 317 |
ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); |
| 318 |
ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); |
| 319 |
ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); |
| 320 |
ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); |
| 321 |
ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); |
| 322 |
ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); |
| 323 |
ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); |
| 324 |
ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); |
| 325 |
|
| 326 |
return 0; |
| 327 |
} |
| 328 |
|
| 329 |
static void alchemy_pci_resume(void *data) |
| 330 |
{ |
| 331 |
struct alchemy_pci_context *ctx = __alchemy_pci_ctx; |
| 332 |
if (!ctx) |
| 333 |
return; |
| 334 |
|
| 335 |
__raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); |
| 336 |
__raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); |
| 337 |
__raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); |
| 338 |
__raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); |
| 339 |
__raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); |
| 340 |
__raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); |
| 341 |
__raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); |
| 342 |
__raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); |
| 343 |
__raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); |
| 344 |
__raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); |
| 345 |
__raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); |
| 346 |
wmb(); |
| 347 |
__raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); |
| 348 |
wmb(); |
| 349 |
|
| 350 |
/* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired |
| 351 |
* on resume, making it necessary to recreate it as soon as possible. |
| 352 |
*/ |
| 353 |
ctx->wired_entry = 8191; /* impossibly high value */ |
| 354 |
alchemy_pci_wired_entry(ctx); /* install it */ |
| 355 |
} |
| 356 |
|
| 357 |
static const struct syscore_ops alchemy_pci_syscore_ops = { |
| 358 |
.suspend = alchemy_pci_suspend, |
| 359 |
.resume = alchemy_pci_resume, |
| 360 |
}; |
| 361 |
|
| 362 |
static struct syscore alchemy_pci_syscore = { |
| 363 |
.ops = &alchemy_pci_syscore_ops, |
| 364 |
}; |
| 365 |
|
| 366 |
static int alchemy_pci_probe(struct platform_device *pdev) |
| 367 |
{ |
| 368 |
struct alchemy_pci_platdata *pd = pdev->dev.platform_data; |
| 369 |
struct alchemy_pci_context *ctx; |
| 370 |
void __iomem *virt_io; |
| 371 |
unsigned long val; |
| 372 |
struct resource *r; |
| 373 |
struct clk *c; |
| 374 |
int ret; |
| 375 |
|
| 376 |
/* need at least PCI IRQ mapping table */ |
| 377 |
if (!pd) { |
| 378 |
dev_err(&pdev->dev, "need platform data for PCI setup\n"); |
| 379 |
ret = -ENODEV; |
| 380 |
goto out; |
| 381 |
} |
| 382 |
|
| 383 |
ctx = kzalloc_obj(*ctx); |
| 384 |
if (!ctx) { |
| 385 |
dev_err(&pdev->dev, "no memory for pcictl context\n"); |
| 386 |
ret = -ENOMEM; |
| 387 |
goto out; |
| 388 |
} |
| 389 |
|
| 390 |
r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 391 |
if (!r) { |
| 392 |
dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); |
| 393 |
ret = -ENODEV; |
| 394 |
goto out1; |
| 395 |
} |
| 396 |
|
| 397 |
if (!request_mem_region(r->start, resource_size(r), pdev->name)) { |
| 398 |
dev_err(&pdev->dev, "cannot claim pci regs\n"); |
| 399 |
ret = -ENODEV; |
| 400 |
goto out1; |
| 401 |
} |
| 402 |
|
| 403 |
c = clk_get(&pdev->dev, "pci_clko"); |
| 404 |
if (IS_ERR(c)) { |
| 405 |
dev_err(&pdev->dev, "unable to find PCI clock\n"); |
| 406 |
ret = PTR_ERR(c); |
| 407 |
goto out2; |
| 408 |
} |
| 409 |
|
| 410 |
ret = clk_prepare_enable(c); |
| 411 |
if (ret) { |
| 412 |
dev_err(&pdev->dev, "cannot enable PCI clock\n"); |
| 413 |
goto out6; |
| 414 |
} |
| 415 |
|
| 416 |
ctx->regs = ioremap(r->start, resource_size(r)); |
| 417 |
if (!ctx->regs) { |
| 418 |
dev_err(&pdev->dev, "cannot map pci regs\n"); |
| 419 |
ret = -ENODEV; |
| 420 |
goto out5; |
| 421 |
} |
| 422 |
|
| 423 |
/* map parts of the PCI IO area */ |
| 424 |
/* REVISIT: if this changes with a newer variant (doubt it) make this |
| 425 |
* a platform resource. |
| 426 |
*/ |
| 427 |
virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000); |
| 428 |
if (!virt_io) { |
| 429 |
dev_err(&pdev->dev, "cannot remap pci io space\n"); |
| 430 |
ret = -ENODEV; |
| 431 |
goto out3; |
| 432 |
} |
| 433 |
ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io; |
| 434 |
|
| 435 |
/* Au1500 revisions older than AD have borked coherent PCI */ |
| 436 |
if (alchemy_get_cputype() == ALCHEMY_CPU_AU1500 && |
| 437 |
read_c0_prid() < 0x01030202 && !dma_default_coherent) { |
| 438 |
val = __raw_readl(ctx->regs + PCI_REG_CONFIG); |
| 439 |
val |= PCI_CONFIG_NC; |
| 440 |
__raw_writel(val, ctx->regs + PCI_REG_CONFIG); |
| 441 |
wmb(); |
| 442 |
dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n"); |
| 443 |
} |
| 444 |
|
| 445 |
if (pd->board_map_irq) |
| 446 |
ctx->board_map_irq = pd->board_map_irq; |
| 447 |
|
| 448 |
if (pd->board_pci_idsel) |
| 449 |
ctx->board_pci_idsel = pd->board_pci_idsel; |
| 450 |
else |
| 451 |
ctx->board_pci_idsel = alchemy_pci_def_idsel; |
| 452 |
|
| 453 |
/* fill in relevant pci_controller members */ |
| 454 |
ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops; |
| 455 |
ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres; |
| 456 |
ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores; |
| 457 |
|
| 458 |
/* we can't ioremap the entire pci config space because it's too large, |
| 459 |
* nor can we dynamically ioremap it because some drivers use the |
| 460 |
* PCI config routines from within atomic context and that becomes a |
| 461 |
* problem in get_vm_area(). Instead we use one wired TLB entry to |
| 462 |
* handle all config accesses for all busses. |
| 463 |
*/ |
| 464 |
ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); |
| 465 |
if (!ctx->pci_cfg_vm) { |
| 466 |
dev_err(&pdev->dev, "unable to get vm area\n"); |
| 467 |
ret = -ENOMEM; |
| 468 |
goto out4; |
| 469 |
} |
| 470 |
ctx->wired_entry = 8191; /* impossibly high value */ |
| 471 |
alchemy_pci_wired_entry(ctx); /* install it */ |
| 472 |
|
| 473 |
set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base); |
| 474 |
|
| 475 |
/* board may want to modify bits in the config register, do it now */ |
| 476 |
val = __raw_readl(ctx->regs + PCI_REG_CONFIG); |
| 477 |
val &= ~pd->pci_cfg_clr; |
| 478 |
val |= pd->pci_cfg_set; |
| 479 |
val &= ~PCI_CONFIG_PD; /* clear disable bit */ |
| 480 |
__raw_writel(val, ctx->regs + PCI_REG_CONFIG); |
| 481 |
wmb(); |
| 482 |
|
| 483 |
__alchemy_pci_ctx = ctx; |
| 484 |
platform_set_drvdata(pdev, ctx); |
| 485 |
register_syscore(&alchemy_pci_syscore); |
| 486 |
register_pci_controller(&ctx->alchemy_pci_ctrl); |
| 487 |
|
| 488 |
dev_info(&pdev->dev, "PCI controller at %ld MHz\n", |
| 489 |
clk_get_rate(c) / 1000000); |
| 490 |
|
| 491 |
return 0; |
| 492 |
|
| 493 |
out4: |
| 494 |
iounmap(virt_io); |
| 495 |
out3: |
| 496 |
iounmap(ctx->regs); |
| 497 |
out5: |
| 498 |
clk_disable_unprepare(c); |
| 499 |
out6: |
| 500 |
clk_put(c); |
| 501 |
out2: |
| 502 |
release_mem_region(r->start, resource_size(r)); |
| 503 |
out1: |
| 504 |
kfree(ctx); |
| 505 |
out: |
| 506 |
return ret; |
| 507 |
} |
| 508 |
|
| 509 |
static struct platform_driver alchemy_pcictl_driver = { |
| 510 |
.probe = alchemy_pci_probe, |
| 511 |
.driver = { |
| 512 |
.name = "alchemy-pci", |
| 513 |
}, |
| 514 |
}; |
| 515 |
|
| 516 |
static int __init alchemy_pci_init(void) |
| 517 |
{ |
| 518 |
/* Au1500/Au1550 have PCI */ |
| 519 |
switch (alchemy_get_cputype()) { |
| 520 |
case ALCHEMY_CPU_AU1500: |
| 521 |
case ALCHEMY_CPU_AU1550: |
| 522 |
return platform_driver_register(&alchemy_pcictl_driver); |
| 523 |
} |
| 524 |
return 0; |
| 525 |
} |
| 526 |
arch_initcall(alchemy_pci_init); |
| 527 |
|
| 528 |
|
| 529 |
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| 530 |
{ |
| 531 |
struct alchemy_pci_context *ctx = dev->sysdata; |
| 532 |
if (ctx && ctx->board_map_irq) |
| 533 |
return ctx->board_map_irq(dev, slot, pin); |
| 534 |
return -1; |
| 535 |
} |
| 536 |
|
| 537 |
int pcibios_plat_dev_init(struct pci_dev *dev) |
| 538 |
{ |
| 539 |
return 0; |
| 540 |
} |