| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2001,2002,2005 Broadcom Corporation |
| 4 |
* Copyright (C) 2004 by Ralf Baechle ([email protected]) |
| 5 |
*/ |
| 6 |
|
| 7 |
/* |
| 8 |
* BCM1480/1455-specific HT support (looking like PCI) |
| 9 |
* |
| 10 |
* This module provides the glue between Linux's PCI subsystem |
| 11 |
* and the hardware. We basically provide glue for accessing |
| 12 |
* configuration space, and set up the translation for I/O |
| 13 |
* space accesses. |
| 14 |
* |
| 15 |
* To access configuration space, we use ioremap. In the 32-bit |
| 16 |
* kernel, this consumes either 4 or 8 page table pages, and 16MB of |
| 17 |
* kernel mapped memory. Hopefully neither of these should be a huge |
| 18 |
* problem. |
| 19 |
* |
| 20 |
*/ |
| 21 |
#include <linux/types.h> |
| 22 |
#include <linux/pci.h> |
| 23 |
#include <linux/kernel.h> |
| 24 |
#include <linux/init.h> |
| 25 |
#include <linux/mm.h> |
| 26 |
#include <linux/console.h> |
| 27 |
#include <linux/tty.h> |
| 28 |
|
| 29 |
#include <asm/sibyte/bcm1480_regs.h> |
| 30 |
#include <asm/sibyte/bcm1480_scd.h> |
| 31 |
#include <asm/sibyte/board.h> |
| 32 |
#include <asm/io.h> |
| 33 |
|
| 34 |
/* |
| 35 |
* Macros for calculating offsets into config space given a device |
| 36 |
* structure or dev/fun/reg |
| 37 |
*/ |
| 38 |
#define CFGOFFSET(bus, devfn, where) (((bus)<<16)+((devfn)<<8)+(where)) |
| 39 |
#define CFGADDR(bus, devfn, where) CFGOFFSET((bus)->number, (devfn), where) |
| 40 |
|
| 41 |
static void *ht_cfg_space; |
| 42 |
|
| 43 |
#define PCI_BUS_ENABLED 1 |
| 44 |
#define PCI_DEVICE_MODE 2 |
| 45 |
|
| 46 |
static int bcm1480ht_bus_status; |
| 47 |
|
| 48 |
#define PCI_BRIDGE_DEVICE 0 |
| 49 |
#define HT_BRIDGE_DEVICE 1 |
| 50 |
|
| 51 |
/* |
| 52 |
* HT's level-sensitive interrupts require EOI, which is generated |
| 53 |
* through a 4MB memory-mapped region |
| 54 |
*/ |
| 55 |
unsigned long ht_eoi_space; |
| 56 |
|
| 57 |
/* |
| 58 |
* Read/write 32-bit values in config space. |
| 59 |
*/ |
| 60 |
static inline u32 READCFG32(u32 addr) |
| 61 |
{ |
| 62 |
return *(u32 *)(ht_cfg_space + (addr&~3)); |
| 63 |
} |
| 64 |
|
| 65 |
static inline void WRITECFG32(u32 addr, u32 data) |
| 66 |
{ |
| 67 |
*(u32 *)(ht_cfg_space + (addr & ~3)) = data; |
| 68 |
} |
| 69 |
|
| 70 |
/* |
| 71 |
* Some checks before doing config cycles: |
| 72 |
* In PCI Device Mode, hide everything on bus 0 except the LDT host |
| 73 |
* bridge. Otherwise, access is controlled by bridge MasterEn bits. |
| 74 |
*/ |
| 75 |
static int bcm1480ht_can_access(struct pci_bus *bus, int devfn) |
| 76 |
{ |
| 77 |
u32 devno; |
| 78 |
|
| 79 |
if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE))) |
| 80 |
return 0; |
| 81 |
|
| 82 |
if (bus->number == 0) { |
| 83 |
devno = PCI_SLOT(devfn); |
| 84 |
if (bcm1480ht_bus_status & PCI_DEVICE_MODE) |
| 85 |
return 0; |
| 86 |
} |
| 87 |
return 1; |
| 88 |
} |
| 89 |
|
| 90 |
/* |
| 91 |
* Read/write access functions for various sizes of values |
| 92 |
* in config space. Return all 1's for disallowed accesses |
| 93 |
* for a kludgy but adequate simulation of master aborts. |
| 94 |
*/ |
| 95 |
|
| 96 |
static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn, |
| 97 |
int where, int size, u32 * val) |
| 98 |
{ |
| 99 |
u32 data = 0; |
| 100 |
|
| 101 |
if ((size == 2) && (where & 1)) |
| 102 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 103 |
else if ((size == 4) && (where & 3)) |
| 104 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 105 |
|
| 106 |
if (bcm1480ht_can_access(bus, devfn)) |
| 107 |
data = READCFG32(CFGADDR(bus, devfn, where)); |
| 108 |
else |
| 109 |
data = 0xFFFFFFFF; |
| 110 |
|
| 111 |
if (size == 1) |
| 112 |
*val = (data >> ((where & 3) << 3)) & 0xff; |
| 113 |
else if (size == 2) |
| 114 |
*val = (data >> ((where & 3) << 3)) & 0xffff; |
| 115 |
else |
| 116 |
*val = data; |
| 117 |
|
| 118 |
return PCIBIOS_SUCCESSFUL; |
| 119 |
} |
| 120 |
|
| 121 |
static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn, |
| 122 |
int where, int size, u32 val) |
| 123 |
{ |
| 124 |
u32 cfgaddr = CFGADDR(bus, devfn, where); |
| 125 |
u32 data = 0; |
| 126 |
|
| 127 |
if ((size == 2) && (where & 1)) |
| 128 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 129 |
else if ((size == 4) && (where & 3)) |
| 130 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 131 |
|
| 132 |
if (!bcm1480ht_can_access(bus, devfn)) |
| 133 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 134 |
|
| 135 |
data = READCFG32(cfgaddr); |
| 136 |
|
| 137 |
if (size == 1) |
| 138 |
data = (data & ~(0xff << ((where & 3) << 3))) | |
| 139 |
(val << ((where & 3) << 3)); |
| 140 |
else if (size == 2) |
| 141 |
data = (data & ~(0xffff << ((where & 3) << 3))) | |
| 142 |
(val << ((where & 3) << 3)); |
| 143 |
else |
| 144 |
data = val; |
| 145 |
|
| 146 |
WRITECFG32(cfgaddr, data); |
| 147 |
|
| 148 |
return PCIBIOS_SUCCESSFUL; |
| 149 |
} |
| 150 |
|
| 151 |
static int bcm1480ht_pcibios_get_busno(void) |
| 152 |
{ |
| 153 |
return 0; |
| 154 |
} |
| 155 |
|
| 156 |
struct pci_ops bcm1480ht_pci_ops = { |
| 157 |
.read = bcm1480ht_pcibios_read, |
| 158 |
.write = bcm1480ht_pcibios_write, |
| 159 |
}; |
| 160 |
|
| 161 |
static struct resource bcm1480ht_mem_resource = { |
| 162 |
.name = "BCM1480 HT MEM", |
| 163 |
.start = A_BCM1480_PHYS_HT_MEM_MATCH_BYTES, |
| 164 |
.end = A_BCM1480_PHYS_HT_MEM_MATCH_BYTES + 0x1fffffffUL, |
| 165 |
.flags = IORESOURCE_MEM, |
| 166 |
}; |
| 167 |
|
| 168 |
static struct resource bcm1480ht_io_resource = { |
| 169 |
.name = "BCM1480 HT I/O", |
| 170 |
.start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, |
| 171 |
.end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL, |
| 172 |
.flags = IORESOURCE_IO, |
| 173 |
}; |
| 174 |
|
| 175 |
struct pci_controller bcm1480ht_controller = { |
| 176 |
.pci_ops = &bcm1480ht_pci_ops, |
| 177 |
.mem_resource = &bcm1480ht_mem_resource, |
| 178 |
.io_resource = &bcm1480ht_io_resource, |
| 179 |
.index = 1, |
| 180 |
.get_busno = bcm1480ht_pcibios_get_busno, |
| 181 |
.io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, |
| 182 |
}; |
| 183 |
|
| 184 |
static int __init bcm1480ht_pcibios_init(void) |
| 185 |
{ |
| 186 |
ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024); |
| 187 |
|
| 188 |
/* CFE doesn't always init all HT paths, so we always scan */ |
| 189 |
bcm1480ht_bus_status |= PCI_BUS_ENABLED; |
| 190 |
|
| 191 |
ht_eoi_space = (unsigned long) |
| 192 |
ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES, |
| 193 |
4 * 1024 * 1024); |
| 194 |
bcm1480ht_controller.io_map_base = (unsigned long) |
| 195 |
ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536); |
| 196 |
bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset; |
| 197 |
|
| 198 |
register_pci_controller(&bcm1480ht_controller); |
| 199 |
|
| 200 |
return 0; |
| 201 |
} |
| 202 |
|
| 203 |
arch_initcall(bcm1480ht_pcibios_init); |