| 1 |
/* |
| 2 |
* This file is subject to the terms and conditions of the GNU General Public |
| 3 |
* License. See the file "COPYING" in the main directory of this archive |
| 4 |
* for more details. |
| 5 |
* |
| 6 |
* Copyright (C) 2008 Maxime Bizon <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <linux/types.h> |
| 10 |
#include <linux/pci.h> |
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/init.h> |
| 13 |
#include <linux/delay.h> |
| 14 |
#include <linux/clk.h> |
| 15 |
#include <asm/bootinfo.h> |
| 16 |
|
| 17 |
#include <bcm63xx_reset.h> |
| 18 |
|
| 19 |
#include "pci-bcm63xx.h" |
| 20 |
|
| 21 |
/* |
| 22 |
* Allow PCI to be disabled at runtime depending on board nvram |
| 23 |
* configuration |
| 24 |
*/ |
| 25 |
int bcm63xx_pci_enabled; |
| 26 |
|
| 27 |
static struct resource bcm_pci_mem_resource = { |
| 28 |
.name = "bcm63xx PCI memory space", |
| 29 |
.start = BCM_PCI_MEM_BASE_PA, |
| 30 |
.end = BCM_PCI_MEM_END_PA, |
| 31 |
.flags = IORESOURCE_MEM |
| 32 |
}; |
| 33 |
|
| 34 |
static struct resource bcm_pci_io_resource = { |
| 35 |
.name = "bcm63xx PCI IO space", |
| 36 |
.start = BCM_PCI_IO_BASE_PA, |
| 37 |
#ifdef CONFIG_CARDBUS |
| 38 |
.end = BCM_PCI_IO_HALF_PA, |
| 39 |
#else |
| 40 |
.end = BCM_PCI_IO_END_PA, |
| 41 |
#endif |
| 42 |
.flags = IORESOURCE_IO |
| 43 |
}; |
| 44 |
|
| 45 |
struct pci_controller bcm63xx_controller = { |
| 46 |
.pci_ops = &bcm63xx_pci_ops, |
| 47 |
.io_resource = &bcm_pci_io_resource, |
| 48 |
.mem_resource = &bcm_pci_mem_resource, |
| 49 |
}; |
| 50 |
|
| 51 |
/* |
| 52 |
* We handle cardbus via a fake Cardbus bridge, memory and io spaces |
| 53 |
* have to be clearly separated from PCI one since we have different |
| 54 |
* memory decoder. |
| 55 |
*/ |
| 56 |
#ifdef CONFIG_CARDBUS |
| 57 |
static struct resource bcm_cb_mem_resource = { |
| 58 |
.name = "bcm63xx Cardbus memory space", |
| 59 |
.start = BCM_CB_MEM_BASE_PA, |
| 60 |
.end = BCM_CB_MEM_END_PA, |
| 61 |
.flags = IORESOURCE_MEM |
| 62 |
}; |
| 63 |
|
| 64 |
static struct resource bcm_cb_io_resource = { |
| 65 |
.name = "bcm63xx Cardbus IO space", |
| 66 |
.start = BCM_PCI_IO_HALF_PA + 1, |
| 67 |
.end = BCM_PCI_IO_END_PA, |
| 68 |
.flags = IORESOURCE_IO |
| 69 |
}; |
| 70 |
|
| 71 |
struct pci_controller bcm63xx_cb_controller = { |
| 72 |
.pci_ops = &bcm63xx_cb_ops, |
| 73 |
.io_resource = &bcm_cb_io_resource, |
| 74 |
.mem_resource = &bcm_cb_mem_resource, |
| 75 |
}; |
| 76 |
#endif |
| 77 |
|
| 78 |
static struct resource bcm_pcie_mem_resource = { |
| 79 |
.name = "bcm63xx PCIe memory space", |
| 80 |
.start = BCM_PCIE_MEM_BASE_PA, |
| 81 |
.end = BCM_PCIE_MEM_END_PA, |
| 82 |
.flags = IORESOURCE_MEM, |
| 83 |
}; |
| 84 |
|
| 85 |
static struct resource bcm_pcie_io_resource = { |
| 86 |
.name = "bcm63xx PCIe IO space", |
| 87 |
.start = 0, |
| 88 |
.end = 0, |
| 89 |
.flags = 0, |
| 90 |
}; |
| 91 |
|
| 92 |
struct pci_controller bcm63xx_pcie_controller = { |
| 93 |
.pci_ops = &bcm63xx_pcie_ops, |
| 94 |
.io_resource = &bcm_pcie_io_resource, |
| 95 |
.mem_resource = &bcm_pcie_mem_resource, |
| 96 |
}; |
| 97 |
|
| 98 |
static u32 bcm63xx_int_cfg_readl(u32 reg) |
| 99 |
{ |
| 100 |
u32 tmp; |
| 101 |
|
| 102 |
tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; |
| 103 |
tmp |= MPI_PCICFGCTL_WRITEEN_MASK; |
| 104 |
bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); |
| 105 |
iob(); |
| 106 |
return bcm_mpi_readl(MPI_PCICFGDATA_REG); |
| 107 |
} |
| 108 |
|
| 109 |
static void bcm63xx_int_cfg_writel(u32 val, u32 reg) |
| 110 |
{ |
| 111 |
u32 tmp; |
| 112 |
|
| 113 |
tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; |
| 114 |
tmp |= MPI_PCICFGCTL_WRITEEN_MASK; |
| 115 |
bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); |
| 116 |
bcm_mpi_writel(val, MPI_PCICFGDATA_REG); |
| 117 |
} |
| 118 |
|
| 119 |
void __iomem *pci_iospace_start; |
| 120 |
|
| 121 |
static void __init bcm63xx_reset_pcie(void) |
| 122 |
{ |
| 123 |
u32 val; |
| 124 |
u32 reg; |
| 125 |
|
| 126 |
/* enable SERDES */ |
| 127 |
if (BCMCPU_IS_6328()) |
| 128 |
reg = MISC_SERDES_CTRL_6328_REG; |
| 129 |
else |
| 130 |
reg = MISC_SERDES_CTRL_6362_REG; |
| 131 |
|
| 132 |
val = bcm_misc_readl(reg); |
| 133 |
val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN; |
| 134 |
bcm_misc_writel(val, reg); |
| 135 |
|
| 136 |
/* reset the PCIe core */ |
| 137 |
bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1); |
| 138 |
bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1); |
| 139 |
mdelay(10); |
| 140 |
|
| 141 |
bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0); |
| 142 |
mdelay(10); |
| 143 |
|
| 144 |
bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0); |
| 145 |
mdelay(200); |
| 146 |
} |
| 147 |
|
| 148 |
static struct clk *pcie_clk; |
| 149 |
|
| 150 |
static int __init bcm63xx_register_pcie(void) |
| 151 |
{ |
| 152 |
u32 val; |
| 153 |
|
| 154 |
/* enable clock */ |
| 155 |
pcie_clk = clk_get(NULL, "pcie"); |
| 156 |
if (IS_ERR_OR_NULL(pcie_clk)) |
| 157 |
return -ENODEV; |
| 158 |
|
| 159 |
clk_prepare_enable(pcie_clk); |
| 160 |
|
| 161 |
bcm63xx_reset_pcie(); |
| 162 |
|
| 163 |
/* configure the PCIe bridge */ |
| 164 |
val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG); |
| 165 |
val |= OPT1_RD_BE_OPT_EN; |
| 166 |
val |= OPT1_RD_REPLY_BE_FIX_EN; |
| 167 |
val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN; |
| 168 |
val |= OPT1_L1_INT_STATUS_MASK_POL; |
| 169 |
bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG); |
| 170 |
|
| 171 |
/* setup the interrupts */ |
| 172 |
val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG); |
| 173 |
val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D; |
| 174 |
bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG); |
| 175 |
|
| 176 |
val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG); |
| 177 |
/* enable credit checking and error checking */ |
| 178 |
val |= OPT2_TX_CREDIT_CHK_EN; |
| 179 |
val |= OPT2_UBUS_UR_DECODE_DIS; |
| 180 |
|
| 181 |
/* set device bus/func for the pcie device */ |
| 182 |
val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT); |
| 183 |
val |= OPT2_CFG_TYPE1_BD_SEL; |
| 184 |
bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG); |
| 185 |
|
| 186 |
/* setup class code as bridge */ |
| 187 |
val = bcm_pcie_readl(PCIE_IDVAL3_REG); |
| 188 |
val &= ~IDVAL3_CLASS_CODE_MASK; |
| 189 |
val |= PCI_CLASS_BRIDGE_PCI_NORMAL; |
| 190 |
bcm_pcie_writel(val, PCIE_IDVAL3_REG); |
| 191 |
|
| 192 |
/* disable bar1 size */ |
| 193 |
val = bcm_pcie_readl(PCIE_CONFIG2_REG); |
| 194 |
val &= ~CONFIG2_BAR1_SIZE_MASK; |
| 195 |
bcm_pcie_writel(val, PCIE_CONFIG2_REG); |
| 196 |
|
| 197 |
/* set bar0 to little endian */ |
| 198 |
val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT; |
| 199 |
val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT; |
| 200 |
val |= BASEMASK_REMAP_EN; |
| 201 |
bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG); |
| 202 |
|
| 203 |
val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT; |
| 204 |
bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG); |
| 205 |
|
| 206 |
register_pci_controller(&bcm63xx_pcie_controller); |
| 207 |
|
| 208 |
return 0; |
| 209 |
} |
| 210 |
|
| 211 |
static int __init bcm63xx_register_pci(void) |
| 212 |
{ |
| 213 |
unsigned int mem_size; |
| 214 |
u32 val; |
| 215 |
/* |
| 216 |
* configuration access are done through IO space, remap 4 |
| 217 |
* first bytes to access it from CPU. |
| 218 |
* |
| 219 |
* this means that no io access from CPU should happen while |
| 220 |
* we do a configuration cycle, but there's no way we can add |
| 221 |
* a spinlock for each io access, so this is currently kind of |
| 222 |
* broken on SMP. |
| 223 |
*/ |
| 224 |
pci_iospace_start = ioremap(BCM_PCI_IO_BASE_PA, 4); |
| 225 |
if (!pci_iospace_start) |
| 226 |
return -ENOMEM; |
| 227 |
|
| 228 |
/* setup local bus to PCI access (PCI memory) */ |
| 229 |
val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; |
| 230 |
bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); |
| 231 |
bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); |
| 232 |
bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); |
| 233 |
|
| 234 |
/* set Cardbus IDSEL (type 0 cfg access on primary bus for |
| 235 |
* this IDSEL will be done on Cardbus instead) */ |
| 236 |
val = bcm_pcmcia_readl(PCMCIA_C1_REG); |
| 237 |
val &= ~PCMCIA_C1_CBIDSEL_MASK; |
| 238 |
val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); |
| 239 |
bcm_pcmcia_writel(val, PCMCIA_C1_REG); |
| 240 |
|
| 241 |
#ifdef CONFIG_CARDBUS |
| 242 |
/* setup local bus to PCI access (Cardbus memory) */ |
| 243 |
val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK; |
| 244 |
bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG); |
| 245 |
bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG); |
| 246 |
val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK; |
| 247 |
bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG); |
| 248 |
#else |
| 249 |
/* disable second access windows */ |
| 250 |
bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); |
| 251 |
#endif |
| 252 |
|
| 253 |
/* setup local bus to PCI access (IO memory), we have only 1 |
| 254 |
* IO window for both PCI and cardbus, but it cannot handle |
| 255 |
* both at the same time, assume standard PCI for now, if |
| 256 |
* cardbus card has IO zone, PCI fixup will change window to |
| 257 |
* cardbus */ |
| 258 |
val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; |
| 259 |
bcm_mpi_writel(val, MPI_L2PIOBASE_REG); |
| 260 |
bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); |
| 261 |
bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); |
| 262 |
|
| 263 |
/* enable PCI related GPIO pins */ |
| 264 |
bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); |
| 265 |
|
| 266 |
/* setup PCI to local bus access, used by PCI device to target |
| 267 |
* local RAM while bus mastering */ |
| 268 |
bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); |
| 269 |
if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) |
| 270 |
val = MPI_SP0_REMAP_ENABLE_MASK; |
| 271 |
else |
| 272 |
val = 0; |
| 273 |
bcm_mpi_writel(val, MPI_SP0_REMAP_REG); |
| 274 |
|
| 275 |
bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); |
| 276 |
bcm_mpi_writel(0, MPI_SP1_REMAP_REG); |
| 277 |
|
| 278 |
mem_size = bcm63xx_get_memory_size(); |
| 279 |
|
| 280 |
/* 6348 before rev b0 exposes only 16 MB of RAM memory through |
| 281 |
* PCI, throw a warning if we have more memory */ |
| 282 |
if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { |
| 283 |
if (mem_size > (16 * 1024 * 1024)) |
| 284 |
printk(KERN_WARNING "bcm63xx: this CPU " |
| 285 |
"revision cannot handle more than 16MB " |
| 286 |
"of RAM for PCI bus mastering\n"); |
| 287 |
} else { |
| 288 |
/* setup sp0 range to local RAM size */ |
| 289 |
bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); |
| 290 |
bcm_mpi_writel(0, MPI_SP1_RANGE_REG); |
| 291 |
} |
| 292 |
|
| 293 |
/* change host bridge retry counter to infinite number of |
| 294 |
* retry, needed for some broadcom wifi cards with Silicon |
| 295 |
* Backplane bus where access to srom seems very slow */ |
| 296 |
val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); |
| 297 |
val &= ~REG_TIMER_RETRY_MASK; |
| 298 |
bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); |
| 299 |
|
| 300 |
/* enable memory decoder and bus mastering */ |
| 301 |
val = bcm63xx_int_cfg_readl(PCI_COMMAND); |
| 302 |
val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| 303 |
bcm63xx_int_cfg_writel(val, PCI_COMMAND); |
| 304 |
|
| 305 |
/* enable read prefetching & disable byte swapping for bus |
| 306 |
* mastering transfers */ |
| 307 |
val = bcm_mpi_readl(MPI_PCIMODESEL_REG); |
| 308 |
val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; |
| 309 |
val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; |
| 310 |
val &= ~MPI_PCIMODESEL_PREFETCH_MASK; |
| 311 |
val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); |
| 312 |
bcm_mpi_writel(val, MPI_PCIMODESEL_REG); |
| 313 |
|
| 314 |
/* enable pci interrupt */ |
| 315 |
val = bcm_mpi_readl(MPI_LOCINT_REG); |
| 316 |
val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); |
| 317 |
bcm_mpi_writel(val, MPI_LOCINT_REG); |
| 318 |
|
| 319 |
register_pci_controller(&bcm63xx_controller); |
| 320 |
|
| 321 |
#ifdef CONFIG_CARDBUS |
| 322 |
register_pci_controller(&bcm63xx_cb_controller); |
| 323 |
#endif |
| 324 |
|
| 325 |
/* mark memory space used for IO mapping as reserved */ |
| 326 |
request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, |
| 327 |
"bcm63xx PCI IO space"); |
| 328 |
return 0; |
| 329 |
} |
| 330 |
|
| 331 |
|
| 332 |
static int __init bcm63xx_pci_init(void) |
| 333 |
{ |
| 334 |
if (!bcm63xx_pci_enabled) |
| 335 |
return -ENODEV; |
| 336 |
|
| 337 |
switch (bcm63xx_get_cpu_id()) { |
| 338 |
case BCM6328_CPU_ID: |
| 339 |
case BCM6362_CPU_ID: |
| 340 |
return bcm63xx_register_pcie(); |
| 341 |
case BCM3368_CPU_ID: |
| 342 |
case BCM6348_CPU_ID: |
| 343 |
case BCM6358_CPU_ID: |
| 344 |
case BCM6368_CPU_ID: |
| 345 |
return bcm63xx_register_pci(); |
| 346 |
default: |
| 347 |
return -ENODEV; |
| 348 |
} |
| 349 |
} |
| 350 |
|
| 351 |
arch_initcall(bcm63xx_pci_init); |