| 1 |
/* |
| 2 |
* This file is subject to the terms and conditions of the GNU General Public |
| 3 |
* License. See the file "COPYING" in the main directory of this archive |
| 4 |
* for more details. |
| 5 |
* |
| 6 |
* SNI specific PCI support for RM200/RM300. |
| 7 |
* |
| 8 |
* Copyright (C) 1997 - 2000, 2003 Ralf Baechle <[email protected]> |
| 9 |
*/ |
| 10 |
#include <linux/kernel.h> |
| 11 |
#include <linux/pci.h> |
| 12 |
#include <linux/types.h> |
| 13 |
#include <asm/sni.h> |
| 14 |
|
| 15 |
/* |
| 16 |
* It seems that on the RM200 only lower 3 bits of the 5 bit PCI device |
| 17 |
* address are decoded. We therefore manually have to reject attempts at |
| 18 |
* reading outside this range. Being on the paranoid side we only do this |
| 19 |
* test for bus 0 and hope forwarding and decoding work properly for any |
| 20 |
* subordinated busses. |
| 21 |
* |
| 22 |
* ASIC PCI only supports type 1 config cycles. |
| 23 |
*/ |
| 24 |
static int set_config_address(unsigned int busno, unsigned int devfn, int reg) |
| 25 |
{ |
| 26 |
if ((devfn > 255) || (reg > 255)) |
| 27 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 28 |
|
| 29 |
if (busno == 0 && devfn >= PCI_DEVFN(8, 0)) |
| 30 |
return PCIBIOS_DEVICE_NOT_FOUND; |
| 31 |
|
| 32 |
*(volatile u32 *)PCIMT_CONFIG_ADDRESS = |
| 33 |
((busno & 0xff) << 16) | |
| 34 |
((devfn & 0xff) << 8) | |
| 35 |
(reg & 0xfc); |
| 36 |
|
| 37 |
return PCIBIOS_SUCCESSFUL; |
| 38 |
} |
| 39 |
|
| 40 |
static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg, |
| 41 |
int size, u32 * val) |
| 42 |
{ |
| 43 |
int res; |
| 44 |
|
| 45 |
if ((res = set_config_address(bus->number, devfn, reg))) |
| 46 |
return res; |
| 47 |
|
| 48 |
switch (size) { |
| 49 |
case 1: |
| 50 |
*val = inb(PCIMT_CONFIG_DATA + (reg & 3)); |
| 51 |
break; |
| 52 |
case 2: |
| 53 |
*val = inw(PCIMT_CONFIG_DATA + (reg & 2)); |
| 54 |
break; |
| 55 |
case 4: |
| 56 |
*val = inl(PCIMT_CONFIG_DATA); |
| 57 |
break; |
| 58 |
} |
| 59 |
|
| 60 |
return 0; |
| 61 |
} |
| 62 |
|
| 63 |
static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg, |
| 64 |
int size, u32 val) |
| 65 |
{ |
| 66 |
int res; |
| 67 |
|
| 68 |
if ((res = set_config_address(bus->number, devfn, reg))) |
| 69 |
return res; |
| 70 |
|
| 71 |
switch (size) { |
| 72 |
case 1: |
| 73 |
outb(val, PCIMT_CONFIG_DATA + (reg & 3)); |
| 74 |
break; |
| 75 |
case 2: |
| 76 |
outw(val, PCIMT_CONFIG_DATA + (reg & 2)); |
| 77 |
break; |
| 78 |
case 4: |
| 79 |
outl(val, PCIMT_CONFIG_DATA); |
| 80 |
break; |
| 81 |
} |
| 82 |
|
| 83 |
return 0; |
| 84 |
} |
| 85 |
|
| 86 |
struct pci_ops sni_pcimt_ops = { |
| 87 |
.read = pcimt_read, |
| 88 |
.write = pcimt_write, |
| 89 |
}; |
| 90 |
|
| 91 |
static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int reg) |
| 92 |
{ |
| 93 |
if ((devfn > 255) || (reg > 255) || (busno > 255)) |
| 94 |
return PCIBIOS_BAD_REGISTER_NUMBER; |
| 95 |
|
| 96 |
outl((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8); |
| 97 |
return PCIBIOS_SUCCESSFUL; |
| 98 |
} |
| 99 |
|
| 100 |
static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg, |
| 101 |
int size, u32 * val) |
| 102 |
{ |
| 103 |
int res; |
| 104 |
|
| 105 |
/* |
| 106 |
* on bus 0 we need to check, whether there is a device answering |
| 107 |
* for the devfn by doing a config write and checking the result. If |
| 108 |
* we don't do it, we will get a data bus error |
| 109 |
*/ |
| 110 |
if (bus->number == 0) { |
| 111 |
pcit_set_config_address(0, 0, 0x68); |
| 112 |
outl(inl(0xcfc) | 0xc0000000, 0xcfc); |
| 113 |
if ((res = pcit_set_config_address(0, devfn, 0))) |
| 114 |
return res; |
| 115 |
outl(0xffffffff, 0xcfc); |
| 116 |
pcit_set_config_address(0, 0, 0x68); |
| 117 |
if (inl(0xcfc) & 0x100000) |
| 118 |
return PCIBIOS_DEVICE_NOT_FOUND; |
| 119 |
} |
| 120 |
if ((res = pcit_set_config_address(bus->number, devfn, reg))) |
| 121 |
return res; |
| 122 |
|
| 123 |
switch (size) { |
| 124 |
case 1: |
| 125 |
*val = inb(PCIMT_CONFIG_DATA + (reg & 3)); |
| 126 |
break; |
| 127 |
case 2: |
| 128 |
*val = inw(PCIMT_CONFIG_DATA + (reg & 2)); |
| 129 |
break; |
| 130 |
case 4: |
| 131 |
*val = inl(PCIMT_CONFIG_DATA); |
| 132 |
break; |
| 133 |
} |
| 134 |
return 0; |
| 135 |
} |
| 136 |
|
| 137 |
static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg, |
| 138 |
int size, u32 val) |
| 139 |
{ |
| 140 |
int res; |
| 141 |
|
| 142 |
if ((res = pcit_set_config_address(bus->number, devfn, reg))) |
| 143 |
return res; |
| 144 |
|
| 145 |
switch (size) { |
| 146 |
case 1: |
| 147 |
outb(val, PCIMT_CONFIG_DATA + (reg & 3)); |
| 148 |
break; |
| 149 |
case 2: |
| 150 |
outw(val, PCIMT_CONFIG_DATA + (reg & 2)); |
| 151 |
break; |
| 152 |
case 4: |
| 153 |
outl(val, PCIMT_CONFIG_DATA); |
| 154 |
break; |
| 155 |
} |
| 156 |
|
| 157 |
return 0; |
| 158 |
} |
| 159 |
|
| 160 |
|
| 161 |
struct pci_ops sni_pcit_ops = { |
| 162 |
.read = pcit_read, |
| 163 |
.write = pcit_write, |
| 164 |
}; |