| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2004 ICT CAS |
| 4 |
* Author: Li xiaoyu, ICT CAS |
| 5 |
* [email protected] |
| 6 |
* |
| 7 |
* Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology |
| 8 |
* Author: Fuxin Zhang, [email protected] |
| 9 |
*/ |
| 10 |
#include <linux/init.h> |
| 11 |
#include <linux/pci.h> |
| 12 |
|
| 13 |
#include <loongson.h> |
| 14 |
|
| 15 |
/* South bridge slot number is set by the pci probe process */ |
| 16 |
static u8 sb_slot = 5; |
| 17 |
|
| 18 |
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| 19 |
{ |
| 20 |
int irq = 0; |
| 21 |
|
| 22 |
if (slot == sb_slot) { |
| 23 |
switch (PCI_FUNC(dev->devfn)) { |
| 24 |
case 2: |
| 25 |
irq = 10; |
| 26 |
break; |
| 27 |
case 3: |
| 28 |
irq = 11; |
| 29 |
break; |
| 30 |
case 5: |
| 31 |
irq = 9; |
| 32 |
break; |
| 33 |
} |
| 34 |
} else { |
| 35 |
irq = LOONGSON_IRQ_BASE + 25 + pin; |
| 36 |
} |
| 37 |
return irq; |
| 38 |
|
| 39 |
} |
| 40 |
|
| 41 |
/* Do platform specific device initialization at pci_enable_device() time */ |
| 42 |
int pcibios_plat_dev_init(struct pci_dev *dev) |
| 43 |
{ |
| 44 |
return 0; |
| 45 |
} |
| 46 |
|
| 47 |
static void loongson2e_nec_fixup(struct pci_dev *pdev) |
| 48 |
{ |
| 49 |
unsigned int val; |
| 50 |
|
| 51 |
/* Configures port 1, 2, 3, 4 to be validate*/ |
| 52 |
pci_read_config_dword(pdev, 0xe0, &val); |
| 53 |
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); |
| 54 |
|
| 55 |
/* System clock is 48-MHz Oscillator. */ |
| 56 |
pci_write_config_dword(pdev, 0xe4, 1 << 5); |
| 57 |
} |
| 58 |
|
| 59 |
static void loongson2e_686b_func0_fixup(struct pci_dev *pdev) |
| 60 |
{ |
| 61 |
unsigned char c; |
| 62 |
|
| 63 |
sb_slot = PCI_SLOT(pdev->devfn); |
| 64 |
|
| 65 |
printk(KERN_INFO "via686b fix: ISA bridge\n"); |
| 66 |
|
| 67 |
/* Enable I/O Recovery time */ |
| 68 |
pci_write_config_byte(pdev, 0x40, 0x08); |
| 69 |
|
| 70 |
/* Enable ISA refresh */ |
| 71 |
pci_write_config_byte(pdev, 0x41, 0x01); |
| 72 |
|
| 73 |
/* disable ISA line buffer */ |
| 74 |
pci_write_config_byte(pdev, 0x45, 0x00); |
| 75 |
|
| 76 |
/* Gate INTR, and flush line buffer */ |
| 77 |
pci_write_config_byte(pdev, 0x46, 0xe0); |
| 78 |
|
| 79 |
/* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */ |
| 80 |
/* pci_write_config_byte(pdev, 0x47, 0x20); */ |
| 81 |
|
| 82 |
/* |
| 83 |
* enable PCI Delay Transaction, Enable EISA ports 4D0/4D1. |
| 84 |
* enable time-out timer |
| 85 |
*/ |
| 86 |
pci_write_config_byte(pdev, 0x47, 0xe6); |
| 87 |
|
| 88 |
/* |
| 89 |
* enable level trigger on pci irqs: 9,10,11,13 |
| 90 |
* important! without this PCI interrupts won't work |
| 91 |
*/ |
| 92 |
outb(0x2e, 0x4d1); |
| 93 |
|
| 94 |
/* 512 K PCI Decode */ |
| 95 |
pci_write_config_byte(pdev, 0x48, 0x01); |
| 96 |
|
| 97 |
/* Wait for PGNT before grant to ISA Master/DMA */ |
| 98 |
pci_write_config_byte(pdev, 0x4a, 0x84); |
| 99 |
|
| 100 |
/* |
| 101 |
* Plug'n'Play |
| 102 |
* |
| 103 |
* Parallel DRQ 3, Floppy DRQ 2 (default) |
| 104 |
*/ |
| 105 |
pci_write_config_byte(pdev, 0x50, 0x0e); |
| 106 |
|
| 107 |
/* |
| 108 |
* IRQ Routing for Floppy and Parallel port |
| 109 |
* |
| 110 |
* IRQ 6 for floppy, IRQ 7 for parallel port |
| 111 |
*/ |
| 112 |
pci_write_config_byte(pdev, 0x51, 0x76); |
| 113 |
|
| 114 |
/* IRQ Routing for serial ports (take IRQ 3 and 4) */ |
| 115 |
pci_write_config_byte(pdev, 0x52, 0x34); |
| 116 |
|
| 117 |
/* All IRQ's level triggered. */ |
| 118 |
pci_write_config_byte(pdev, 0x54, 0x00); |
| 119 |
|
| 120 |
/* route PIRQA-D irq */ |
| 121 |
pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */ |
| 122 |
pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */ |
| 123 |
/* 3-0, PIRQB */ |
| 124 |
pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */ |
| 125 |
|
| 126 |
/* enable function 5/6, audio/modem */ |
| 127 |
pci_read_config_byte(pdev, 0x85, &c); |
| 128 |
c &= ~(0x3 << 2); |
| 129 |
pci_write_config_byte(pdev, 0x85, c); |
| 130 |
|
| 131 |
printk(KERN_INFO"via686b fix: ISA bridge done\n"); |
| 132 |
} |
| 133 |
|
| 134 |
static void loongson2e_686b_func1_fixup(struct pci_dev *pdev) |
| 135 |
{ |
| 136 |
printk(KERN_INFO"via686b fix: IDE\n"); |
| 137 |
|
| 138 |
/* Modify IDE controller setup */ |
| 139 |
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48); |
| 140 |
pci_write_config_byte(pdev, PCI_COMMAND, |
| 141 |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| 142 |
PCI_COMMAND_MASTER); |
| 143 |
pci_write_config_byte(pdev, 0x40, 0x0b); |
| 144 |
/* legacy mode */ |
| 145 |
pci_write_config_byte(pdev, 0x42, 0x09); |
| 146 |
|
| 147 |
#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */ |
| 148 |
/* disable read prefetch/write post buffers */ |
| 149 |
pci_write_config_byte(pdev, 0x41, 0x02); |
| 150 |
|
| 151 |
/* use 3/4 as fifo thresh hold */ |
| 152 |
pci_write_config_byte(pdev, 0x43, 0x0a); |
| 153 |
pci_write_config_byte(pdev, 0x44, 0x00); |
| 154 |
|
| 155 |
pci_write_config_byte(pdev, 0x45, 0x00); |
| 156 |
#else |
| 157 |
pci_write_config_byte(pdev, 0x41, 0xc2); |
| 158 |
pci_write_config_byte(pdev, 0x43, 0x35); |
| 159 |
pci_write_config_byte(pdev, 0x44, 0x1c); |
| 160 |
|
| 161 |
pci_write_config_byte(pdev, 0x45, 0x10); |
| 162 |
#endif |
| 163 |
|
| 164 |
printk(KERN_INFO"via686b fix: IDE done\n"); |
| 165 |
} |
| 166 |
|
| 167 |
static void loongson2e_686b_func2_fixup(struct pci_dev *pdev) |
| 168 |
{ |
| 169 |
/* irq routing */ |
| 170 |
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); |
| 171 |
} |
| 172 |
|
| 173 |
static void loongson2e_686b_func3_fixup(struct pci_dev *pdev) |
| 174 |
{ |
| 175 |
/* irq routing */ |
| 176 |
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); |
| 177 |
} |
| 178 |
|
| 179 |
static void loongson2e_686b_func5_fixup(struct pci_dev *pdev) |
| 180 |
{ |
| 181 |
unsigned int val; |
| 182 |
unsigned char c; |
| 183 |
|
| 184 |
/* enable IO */ |
| 185 |
pci_write_config_byte(pdev, PCI_COMMAND, |
| 186 |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| 187 |
PCI_COMMAND_MASTER); |
| 188 |
pci_read_config_dword(pdev, 0x4, &val); |
| 189 |
pci_write_config_dword(pdev, 0x4, val | 1); |
| 190 |
|
| 191 |
/* route ac97 IRQ */ |
| 192 |
pci_write_config_byte(pdev, 0x3c, 9); |
| 193 |
|
| 194 |
pci_read_config_byte(pdev, 0x8, &c); |
| 195 |
|
| 196 |
/* link control: enable link & SGD PCM output */ |
| 197 |
pci_write_config_byte(pdev, 0x41, 0xcc); |
| 198 |
|
| 199 |
/* disable game port, FM, midi, sb, enable write to reg2c-2f */ |
| 200 |
pci_write_config_byte(pdev, 0x42, 0x20); |
| 201 |
|
| 202 |
/* we are using Avance logic codec */ |
| 203 |
pci_write_config_word(pdev, 0x2c, 0x1005); |
| 204 |
pci_write_config_word(pdev, 0x2e, 0x4710); |
| 205 |
pci_read_config_dword(pdev, 0x2c, &val); |
| 206 |
|
| 207 |
pci_write_config_byte(pdev, 0x42, 0x0); |
| 208 |
} |
| 209 |
|
| 210 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, |
| 211 |
loongson2e_686b_func0_fixup); |
| 212 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, |
| 213 |
loongson2e_686b_func1_fixup); |
| 214 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, |
| 215 |
loongson2e_686b_func2_fixup); |
| 216 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, |
| 217 |
loongson2e_686b_func3_fixup); |
| 218 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, |
| 219 |
loongson2e_686b_func5_fixup); |
| 220 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, |
| 221 |
loongson2e_nec_fixup); |