Debian Codegraph @

config/eicon-2

raw
1 # $Id$
2 #
3 # prototype config file for the Eicon Diva ISDN Modem
4 #
5
6 #
7 # CONFIG: CLASS2:Eicon*-*-*
8 #
9 # BEGIN-SERVER
10 # END-SERVER
11 #
12
13 ModemType: Class2
14 ModemRate: 19200 # on boards supporting V.34-fax,
15 # this may need to be 57600
16 ModemFlowControl: rtscts
17 ModemNoFlowCmd: AT&K0
18 ModemSoftFlowCmd: AT&K4
19 ModemHardFlowCmd: AT&K3
20
21 #
22 # Make sure the modem gives us Caller*ID in a legible way.
23 #
24 ModemResetCmds: AT#CID=14
25
26 #
27 # Eicon recommends initializing with AT+iQ=a1 where "1" is
28 # the controller number. This command binds the tty to that
29 # controller and bypasses the "channel pool" approach.
30 #
31 #ModemResetCmds: AT#CID=14+iQ=a1
32
33 #
34 # These should match the modem responses for DID and Caller*ID.
35 #
36 CallIDPattern: "DAD: "
37 CallIDPattern: "CID: "
38
39 Class2APQueryCmd: none
40 Class2SPLCmd: none
41 Class2TBCCmd: none
42 Class2PHCTOCmd: none
43
44 #
45 # As Eicon's "Class 2" is a cross-breed and abomination between
46 # Class 2.0, 2.1, and old-style 2 it may require some testing
47 # to see if ECM type 2.0 or 2 is used and whether or not hexadecimal
48 # is presented in the +FDCC response.
49 #
50 #Class2ECMType: 2.0 # follows Class 2.0 spec, not Class 2
51 Class2ECMType: 2
52 #
53 Class2UseHex: true
54 #Class2UseHex: false