Debian Codegraph @

config/cirrus

raw
1 # $Id$
2 #
3 # HylaFAX Facsimile Software
4 #
5 # Copyright (c) 1990-1996 Sam Leffler
6 # Copyright (c) 1991-1996 Silicon Graphics, Inc.
7 # HylaFAX is a trademark of Silicon Graphics, Inc.
8 #
9 # Permission to use, copy, modify, distribute, and sell this software and
10 # its documentation for any purpose is hereby granted without fee, provided
11 # that (i) the above copyright notices and this permission notice appear in
12 # all copies of the software and related documentation, and (ii) the names of
13 # Sam Leffler and Silicon Graphics may not be used in any advertising or
14 # publicity relating to the software without the specific, prior written
15 # permission of Sam Leffler and Silicon Graphics.
16 #
17 # THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
18 # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
19 # WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
20 #
21 # IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
22 # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
23 # OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
24 # WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
25 # LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
26 # OF THIS SOFTWARE.
27 #
28
29 #
30 # Configuration for modems based on the Cirrus Logic Chipset
31 # (such as the builtin modem that comes with a WinBook XP).
32 #
33 # This configuration file sets up the modem for
34 # 57.6 w/ hardware flow control.
35 #
36 # CONFIG:CLASS1:1.02:.*:.*: Manufacturer="Cirrus Logic" Model="CL-MD1414AT/EC"
37 # CONFIG:CLASS1:1.0:CL-MD34*:.*: Manufacturer="Cirrus Logic" Model="CL-MD34xx"
38 # CONFIG:CLASS1:1.0:CL-MD56*:.*: Manufacturer="Cirrus Logic" Model="CL-MD56xx"
39 # CONFIG:CLASS1:.*:MD56xx:.*: Manufacturer="Intel/Ambient/Cirrus Logic" Model="CL-MD56xx"
40 #
41 # BEGIN-SERVER
42 # END-SERVER
43 #
44 # Modem-related stuff: should reflect modem command interface
45 # and hardware connection/cabling (e.g. flow control).
46 #
47 ModemType: Class1 # use this to supply a hint
48 ModemRate: 57600 # rate for DCE-DTE communication
49 ModemFlowControl: rtscts # RTS/CTS flow control assumed
50 #
51 ModemSoftFlowCmd: AT\Q1 # set desired flow control method
52 ModemHardFlowCmd: AT\Q3 # set desired flow control method
53 ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
54 ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
55 ModemDialCmd: ATDT%s
56 #
57 # Happy days! This modem has proper support for querying
58 # the model, manufacturer, and firmware revision!
59 #
60 ModemMfrQueryCmd: AT+FMFR?
61 ModemModelQueryCmd: AT+FMDL?
62 ModemRevQueryCmd: AT+FREV?
63
64 Class1PPMWaitCmd: "<delay\0727>" # \072 == : to avoid awk problem
65 Class1TCFWaitCmd: "<delay\0727>"
66 Class1EOPWaitCmd: "<delay\0729>"
67 Class1SwitchingCmd: "<delay\0727>" # assumption: +FRS not supported