Debian Codegraph @

translations/qtxmlpatterns_ko.ts

raw
1 <?xml version="1.0" encoding="utf-8"?>
2 <!DOCTYPE TS>
3 <TS version="2.1" language="ko">
4 <context>
5 <name>QQuickXmlListModel</name>
6 <message>
7 <source>&quot;%1&quot; duplicates a previous role name and will be disabled.</source>
8 <translation>&quot;%1&quot;에서 이전에 선언된 역할을 재정의하므로 비활성화되었습니다.</translation>
9 </message>
10 <message>
11 <source>invalid query: &quot;%1&quot;</source>
12 <translation>잘못된 질의: &quot;%1&quot;</translation>
13 </message>
14 </context>
15 <context>
16 <name>QQuickXmlListModelRole</name>
17 <message>
18 <source>An XmlRole query must not start with &apos;/&apos;</source>
19 <translation>XmlRole 질의는 &apos;/&apos;로 시작할 수 없음</translation>
20 </message>
21 </context>
22 <context>
23 <name>QQuickXmlRoleList</name>
24 <message>
25 <source>An XmlListModel query must start with &apos;/&apos; or &quot;//&quot;</source>
26 <translation>XmlListModel 질의는 &apos;/&apos; 또는 &quot;//&quot;로 시작해야 함</translation>
27 </message>
28 </context>
29 <context>
30 <name>QXmlPatternistCLI</name>
31 <message>
32 <source>Warning in %1, at line %2, column %3: %4</source>
33 <translation>%1의 %2번째 줄 %3번째 글자에서 경고 발생: %4</translation>
34 </message>
35 <message>
36 <source>Warning in %1: %2</source>
37 <translation>%1에서 경고 발생: %2</translation>
38 </message>
39 <message>
40 <source>Unknown location</source>
41 <translation>알 수 없는 위치</translation>
42 </message>
43 <message>
44 <source>Error %1 in %2, at line %3, column %4: %5</source>
45 <translation>%2의 %3번째 줄 %4번째 글자에서 오류 %1 발생: %5</translation>
46 </message>
47 <message>
48 <source>Error %1 in %2: %3</source>
49 <translation>%2에서 오류 %1 발생: %3</translation>
50 </message>
51 </context>
52 <context>
53 <name>QtXmlPatterns</name>
54 <message>
55 <source>An %1-attribute with value %2 has already been declared.</source>
56 <translation>값이 %2인 %1 속성이 이미 선언되었습니다.</translation>
57 </message>
58 <message>
59 <source>An %1-attribute must have a valid %2 as value, which %3 isn&apos;t.</source>
60 <translation>%1 속성의 값으로 올바른 %2 값이 와야 하지만 %3은(는) 올바른 값이 아닙니다.</translation>
61 </message>
62 <message>
63 <source>%1 is an unsupported encoding.</source>
64 <translation>%1 인코딩은 지원하지 않습니다.</translation>
65 </message>
66 <message>
67 <source>%1 contains octets which are disallowed in the requested encoding %2.</source>
68 <translation>%1은(는) 요청한 인코딩 %2에서 사용할 수 없는 바이트 배열을 포함합니다.</translation>
69 </message>
70 <message>
71 <source>The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character.</source>
72 <translation>%3 인코딩을 사용하며 %2에 있는 코드포인트 %1은(는) 올바르지 않은 XML 문자입니다.</translation>
73 </message>
74 <message>
75 <source>Network timeout.</source>
76 <translation>네트워크 시간 초과됨.</translation>
77 </message>
78 <message>
79 <source>Element %1 can&apos;t be serialized because it appears outside the document element.</source>
80 <translation>원소 %1이(가) 문서 밖에 나오므로 시리얼화할 수 없습니다.</translation>
81 </message>
82 <message>
83 <source>Attribute %1 can&apos;t be serialized because it appears at the top level.</source>
84 <translation>속성 %1이(가) 최상위 단계에 나타나므로 시리얼화할 수 없습니다.</translation>
85 </message>
86 <message>
87 <source>Year %1 is invalid because it begins with %2.</source>
88 <translation>%1년은 %2(으)로 시작하므로 올바르지 않습니다.</translation>
89 </message>
90 <message>
91 <source>Day %1 is outside the range %2..%3.</source>
92 <translation>날짜 %1은(는) %2..%3 범위 밖에 있습니다.</translation>
93 </message>
94 <message>
95 <source>Month %1 is outside the range %2..%3.</source>
96 <translation>달 %1은(는) 범위 %2..%3 밖에 있습니다.</translation>
97 </message>
98 <message>
99 <source>Overflow: Can&apos;t represent date %1.</source>
100 <translation>넘침: 날짜 %1을(를) 표시할 수 없습니다.</translation>
101 </message>
102 <message>
103 <source>Day %1 is invalid for month %2.</source>
104 <translation>%2월에는 %1일이 없습니다.</translation>
105 </message>
106 <message>
107 <source>Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; </source>
108 <translation>24시간제 시간 24:%1:%2.%3이(가) 올바르지 않습니다. 시간은 24이나 분, 초, 밀리초가 모두 0 이상입니다; </translation>
109 </message>
110 <message>
111 <source>Time %1:%2:%3.%4 is invalid.</source>
112 <translation>시간 %1:%2:%3.%4이(가) 올바르지 않습니다.</translation>
113 </message>
114 <message>
115 <source>Overflow: Date can&apos;t be represented.</source>
116 <translation>넘침: 날짜를 표시할 수 없습니다.</translation>
117 </message>
118 <message>
119 <source>At least one component must be present.</source>
120 <translation>최소한 하나의 구성 요소가 필요합니다.</translation>
121 </message>
122 <message>
123 <source>At least one time component must appear after the %1-delimiter.</source>
124 <translation>구분자 %1 이후에 최소 하나의 시간 구성 요소가 나와야 합니다.</translation>
125 </message>
126 <message>
127 <source>No operand in an integer division, %1, can be %2.</source>
128 <translation>정수 나눗셈의 두 연산자 %1 모두 %2일 수 없습니다.</translation>
129 </message>
130 <message>
131 <source>The first operand in an integer division, %1, cannot be infinity (%2).</source>
132 <translation>정수 나눗셈의 첫번째 연산자 %1은(는) 무한대일 수 없습니다(%2).</translation>
133 </message>
134 <message>
135 <source>The second operand in a division, %1, cannot be zero (%2).</source>
136 <translation>나눗셈의 두번째 연산자 %1은(는) 0일 수 없습니다(%2).</translation>
137 </message>
138 <message>
139 <source>%1 is not a valid value of type %2.</source>
140 <translation>%1은(는) 올바른 %2 형식의 값이 아닙니다.</translation>
141 </message>
142 <message>
143 <source>When casting to %1 from %2, the source value cannot be %3.</source>
144 <translation>%1에서 %2(으)로 변환할 때 원본 값이 %3일 수 없습니다.</translation>
145 </message>
146 <message>
147 <source>Integer division (%1) by zero (%2) is undefined.</source>
148 <translation>0(%2)으로 나누는 정수 나눗셈(%1)은 정의되지 않았습니다.</translation>
149 </message>
150 <message>
151 <source>Division (%1) by zero (%2) is undefined.</source>
152 <translation>0(%2)으로 나누는 나눗셈(%1)은 정의되지 않았습니다.</translation>
153 </message>
154 <message>
155 <source>Modulus division (%1) by zero (%2) is undefined.</source>
156 <translation>0(%2)으로 나눈 나머지(%1)는 정의되지 않았습니다.</translation>
157 </message>
158 <message>
159 <source>Dividing a value of type %1 by %2 (not-a-number) is not allowed.</source>
160 <translation>%1 형식의 값을 %2(숫자가 아님)(으)로 나누는 것은 허용되지 않습니다.</translation>
161 </message>
162 <message>
163 <source>Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed.</source>
164 <translation>%1 형식의 값을 %2나 %3(+0/-0)(으)로 나누는 것은 허용되지 않습니다.</translation>
165 </message>
166 <message>
167 <source>Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed.</source>
168 <translation>%1 형식의 값을 %2나 %3(양이나 음의 무한대)(으)로 곱하는 것은 허용되지 않습니다.</translation>
169 </message>
170 <message>
171 <source>A value of type %1 cannot have an Effective Boolean Value.</source>
172 <translation>%1 형식의 값은 유효한 참/거짓을 가질 수 없습니다.</translation>
173 </message>
174 <message>
175 <source>Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values.</source>
176 <translation>유효한 참/거짓 값은 두 개 이상의 원자적인 값을 포함하는 배열과 함께 계산될 수 없습니다.</translation>
177 </message>
178 <message>
179 <source>Value %1 of type %2 exceeds maximum (%3).</source>
180 <translation>%2 형식의 값 %1이(가) 최댓값 %3보다 큽니다.</translation>
181 </message>
182 <message>
183 <source>Value %1 of type %2 is below minimum (%3).</source>
184 <translation>%2 형식의 값 %1이(가) 최솟값 %3보다 작습니다.</translation>
185 </message>
186 <message>
187 <source>A value of type %1 must contain an even number of digits. The value %2 does not.</source>
188 <translation>%1 형식의 값은 짝수 자리수만 포함할 수 있으나, 값 %2은(는) 그렇지 않습니다.</translation>
189 </message>
190 <message>
191 <source>%1 is not valid as a value of type %2.</source>
192 <translation>%1은(는) 올바른 %2 형식의 값이 아닙니다.</translation>
193 </message>
194 <message>
195 <source>Ambiguous rule match.</source>
196 <translation>모호한 규칙 일치.</translation>
197 </message>
198 <message>
199 <source>Operator %1 cannot be used on type %2.</source>
200 <translation>연산자 %1은(는) 형식 %2에 사용할 수 없습니다.</translation>
201 </message>
202 <message>
203 <source>Operator %1 cannot be used on atomic values of type %2 and %3.</source>
204 <translation>연산자 %1은(는) %2, %3 형식의 원자적인 값에 사용할 수 없습니다.</translation>
205 </message>
206 <message>
207 <source>The namespace URI in the name for a computed attribute cannot be %1.</source>
208 <translation>계산된 속성 이름의 네임스페이스 URL는 %1일 수 없습니다.</translation>
209 </message>
210 <message>
211 <source>The name for a computed attribute cannot have the namespace URI %1 with the local name %2.</source>
212 <translation>계산된 속성 이름의 네임스페이스 URL는 %1, 로컬 이름은 %2일 수 없습니다.</translation>
213 </message>
214 <message>
215 <source>Type error in cast, expected %1, received %2.</source>
216 <translation>변환 중 형식 오류, %1을(를) 예상했지만 %2을(를) 받음.</translation>
217 </message>
218 <message>
219 <source>When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed.</source>
220 <translation>%1 및 파생 형식으로 변환하려면 원본 값은 같은 형식이거나 문자열 리터럴이어야 합니다. %2 형식은 허용되지 않습니다.</translation>
221 </message>
222 <message>
223 <source>No casting is possible with %1 as the target type.</source>
224 <translation>%1 형식으로 변환할 수 없습니다.</translation>
225 </message>
226 <message>
227 <source>It is not possible to cast from %1 to %2.</source>
228 <translation>형식 %1에서 %2(으)로 변환할 수 없습니다.</translation>
229 </message>
230 <message>
231 <source>Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated.</source>
232 <translation>%1은(는) 추상 형식으로 인스턴스를 생성할 수 없어서 변환할 수 없습니다.</translation>
233 </message>
234 <message>
235 <source>It&apos;s not possible to cast the value %1 of type %2 to %3</source>
236 <translation>%2 형식의 값 %1을(를) %3(으)로 변환할 수 없음</translation>
237 </message>
238 <message>
239 <source>Failure when casting from %1 to %2: %3</source>
240 <translation>%1을(를) %2(으)로 변환하는 중 오류 발생: %3</translation>
241 </message>
242 <message>
243 <source>A comment cannot contain %1</source>
244 <translation>주석에는 %1을(를) 포함할 수 없음</translation>
245 </message>
246 <message>
247 <source>A comment cannot end with a %1.</source>
248 <translation>주석은 %1(으)로 끝날 수 없습니다.</translation>
249 </message>
250 <message>
251 <source>No comparisons can be done involving the type %1.</source>
252 <translation>형식 %1의 값은 비교할 수 없습니다.</translation>
253 </message>
254 <message>
255 <source>Operator %1 is not available between atomic values of type %2 and %3.</source>
256 <translation>형식 %2, %3인 원자적 값에서 연산자 %1을(를) 사용할 수 없습니다.</translation>
257 </message>
258 <message>
259 <source>In a namespace constructor, the value for a namespace cannot be an empty string.</source>
260 <translation>네임스페이스 생성자에서 네임스페이스의 값은 빈 문자열일 수 없습니다.</translation>
261 </message>
262 <message>
263 <source>The prefix must be a valid %1, which %2 is not.</source>
264 <translation>접두사는 올바른 %1이어야 하지만, %2은(는) 그렇지 않습니다.</translation>
265 </message>
266 <message>
267 <source>The prefix %1 cannot be bound.</source>
268 <translation>접두사 %1이(가) 바인딩될 수 없습니다.</translation>
269 </message>
270 <message>
271 <source>Only the prefix %1 can be bound to %2 and vice versa.</source>
272 <translation>접두사 %1만 %2에 바인딩할 수 있으며, 그 역도 마찬가지입니다.</translation>
273 </message>
274 <message>
275 <source>An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place.</source>
276 <translation>속성 노드는 문서 노드의 자식이 될 수 없습니다. 따라서 속성 %1의 위치가 잘못되었습니다.</translation>
277 </message>
278 <message>
279 <source>Circularity detected</source>
280 <translation>재귀 감지됨</translation>
281 </message>
282 <message>
283 <source>A library module cannot be evaluated directly. It must be imported from a main module.</source>
284 <translation>라이브러리 모듈은 직접적으로 실행될 수 없으며, 주 모듈에서 가져와야 합니다.</translation>
285 </message>
286 <message>
287 <source>No template by name %1 exists.</source>
288 <translation>이름이 %1인 템플릿이 없습니다.</translation>
289 </message>
290 <message>
291 <source>A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type.</source>
292 <translation>%1 형식의 값은 술어가 될 수 없습니다. 술어는 숫자 형식이나 유효한 참/거짓 형식의 값을 가져야 합니다.</translation>
293 </message>
294 <message>
295 <source>A positional predicate must evaluate to a single numeric value.</source>
296 <translation>위치가 정해진 술어는 유일한 숫자 값으로 해석되어야 합니다.</translation>
297 </message>
298 <message>
299 <source>The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid.</source>
300 <translation>처리 과정의 대상 이름은 %1을(를) 모두 대문자나 소문자로 써야 하므로, %2은(는) 올바르지 않습니다.</translation>
301 </message>
302 <message>
303 <source>%1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3.</source>
304 <translation>%1은(는) 올바른 처리 방법 대상 이름이 아닙니다. %3와(과) 같은 %2 값이어야 합니다.</translation>
305 </message>
306 <message>
307 <source>The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two.</source>
308 <translation>경로의 마지막 단계는 노드나 원자적 값만 포함할 수 있으며, 둘을 같이 사용할 수 없습니다.</translation>
309 </message>
310 <message>
311 <source>The data of a processing instruction cannot contain the string %1</source>
312 <translation>처리 과정의 데이터는 문자열 %1을(를) 포함할 수 없습니다</translation>
313 </message>
314 <message>
315 <source>No namespace binding exists for the prefix %1</source>
316 <translation>접두사 %1의 네임스페이스 바인딩이 존재하지 않습니다</translation>
317 </message>
318 <message>
319 <source>No namespace binding exists for the prefix %1 in %2</source>
320 <translation>%2의 접두사 %1의 네임스페이스 바인딩이 존재하지 않습니다</translation>
321 </message>
322 <message>
323 <source>%1 is an invalid %2</source>
324 <translation>%1은(는) 올바르지 않은 %2입니다</translation>
325 </message>
326 <message>
327 <source>The parameter %1 is passed, but no corresponding %2 exists.</source>
328 <translation>인자 %1이(가) 전달되었으나 대응하는 %2이(가) 없습니다.</translation>
329 </message>
330 <message>
331 <source>The parameter %1 is required, but no corresponding %2 is supplied.</source>
332 <translation>인자 %1이(가) 필요하나, 해당하는 %2이(가) 없습니다.</translation>
333 </message>
334 <message numerus="yes">
335 <source>%1 takes at most %n argument(s). %2 is therefore invalid.</source>
336 <translation>
337 <numerusform>%1은(는) 최대 %n개의 인자를 받아들이므로, %2은(는) 올바르지 않습니다.</numerusform>
338 </translation>
339 </message>
340 <message numerus="yes">
341 <source>%1 requires at least %n argument(s). %2 is therefore invalid.</source>
342 <translation>
343 <numerusform>%1은(는) 최소 %n개의 인자를 받아들이므로, %2은(는) 올바르지 않습니다.</numerusform>
344 </translation>
345 </message>
346 <message>
347 <source>The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration.</source>
348 <translation>%1의 첫 번째 인자는 %2 형식일 수 없습니다. 숫자나 xs:yearMonthDuration, xs:dayTimeDuration 형식이어야 합니다.</translation>
349 </message>
350 <message>
351 <source>The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
352 <translation>%1의 첫 번째 인자는 %2 형식일 수 없습니다. %3, %4, %5 형식이어야 합니다.</translation>
353 </message>
354 <message>
355 <source>The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
356 <translation>%1의 두 번째 인자는 %2 형식일 수 없습니다. %3, %4, %5 형식이어야 합니다.</translation>
357 </message>
358 <message>
359 <source>%1 is not a valid XML 1.0 character.</source>
360 <translation>%1은(는) 올바르지 않은 XML 1.0 글자입니다.</translation>
361 </message>
362 <message>
363 <source>The first argument to %1 cannot be of type %2.</source>
364 <translation>%1의 첫 번째 인자의 형식이 %2일 수 없습니다.</translation>
365 </message>
366 <message>
367 <source>The root node of the second argument to function %1 must be a document node. %2 is not a document node.</source>
368 <translation>함수 %1의 두 번째 인자의 루트 노드는 문서 노드여야 합니다. %2은(는) 문서 노드가 아닙니다.</translation>
369 </message>
370 <message>
371 <source>If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same.</source>
372 <translation>두 값이 모두 지역 오프셋을 가지고 있다면 같아야 합니다. %1와(과) %2은(는) 같지 않습니다.</translation>
373 </message>
374 <message>
375 <source>%1 was called.</source>
376 <translation>%1이(가) 호출되었습니다.</translation>
377 </message>
378 <message>
379 <source>%1 must be followed by %2 or %3, not at the end of the replacement string.</source>
380 <translation>%1은(는) %2(이)나 %3 뒤에 와야 하며, 바꿀 문자열 뒤에 올 수 없습니다.</translation>
381 </message>
382 <message>
383 <source>In the replacement string, %1 must be followed by at least one digit when not escaped.</source>
384 <translation>바꿀 문자열이 이스케이핑되지 않았다면 %1 뒤에 숫자가 최소 하나는 와야 합니다.</translation>
385 </message>
386 <message>
387 <source>In the replacement string, %1 can only be used to escape itself or %2, not %3</source>
388 <translation>바꿀 문자열에서 %1은(는) 자기 자신이나 %2을(를) 이스케이핑하는 데 사용해야 하며, %3에는 사용할 수 없습니다</translation>
389 </message>
390 <message>
391 <source>%1 matches newline characters</source>
392 <translation>%1은(는) 새 줄 문자에 일치합니다</translation>
393 </message>
394 <message>
395 <source>%1 and %2 match the start and end of a line.</source>
396 <translation>%1와(과) %2은(는) 각각 줄의 시작과 끝에 일치합니다.</translation>
397 </message>
398 <message>
399 <source>Matches are case insensitive</source>
400 <translation>대소문자를 구분하여 일치시킵니다</translation>
401 </message>
402 <message>
403 <source>Whitespace characters are removed, except when they appear in character classes</source>
404 <translation>문자 클래스에 나타나지 않으면 공백 문자는 삭제됩니다</translation>
405 </message>
406 <message>
407 <source>%1 is an invalid regular expression pattern: %2</source>
408 <translation>%1은(는) 올바른 정규 표현식 패턴이 아닙니다: %2</translation>
409 </message>
410 <message>
411 <source>%1 is an invalid flag for regular expressions. Valid flags are:</source>
412 <translation>%1은(는) 올바르지 않은 정규 표현식 플래그입니다. 올바른 플래그는 다음과 같습니다:</translation>
413 </message>
414 <message>
415 <source>If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified.</source>
416 <translation>첫 번째 인자가 빈 시퀀스나 빈 문자열(네임스페이스 없음)인 경우, 접두사를 지정할 수 없습니다. 접두사 %1이(가) 지정되었습니다.</translation>
417 </message>
418 <message>
419 <source>It will not be possible to retrieve %1.</source>
420 <translation>%1을(를) 가져올 수 없습니다.</translation>
421 </message>
422 <message>
423 <source>The default collection is undefined</source>
424 <translation>기본 조건이 정의되지 않았음</translation>
425 </message>
426 <message>
427 <source>%1 cannot be retrieved</source>
428 <translation>%1을(를) 가져올 수 없음</translation>
429 </message>
430 <message>
431 <source>The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization).</source>
432 <translation>정규화 형식 %1은(는) 지원하지 않습니다. 지원하는 형식은 %2, %3, %4, %5이며, 빈 문자열을 입력하면 정규화하지 않습니다.</translation>
433 </message>
434 <message>
435 <source>A zone offset must be in the range %1..%2 inclusive. %3 is out of range.</source>
436 <translation>시간대 오프셋은 %1..%2 범위 안에 있어야 하며 이 두 값을 포함합니다. %3은(는) 범위를 벗어났습니다.</translation>
437 </message>
438 <message>
439 <source>%1 is not a whole number of minutes.</source>
440 <translation>%1은(는) 올바른 분 숫자가 아닙니다.</translation>
441 </message>
442 <message>
443 <source>The URI cannot have a fragment</source>
444 <translation>URI에는 조각이 올 수 없음</translation>
445 </message>
446 <message>
447 <source>Required cardinality is %1; got cardinality %2.</source>
448 <translation>필요한 농도는 %1이지만, %2이(가) 지정되었습니다.</translation>
449 </message>
450 <message>
451 <source>The item %1 did not match the required type %2.</source>
452 <translation>항목 %1은(는) 필요한 형식 %2과(와) 일치하지 않습니다.</translation>
453 </message>
454 <message>
455 <source>Attribute %1 cannot appear on the element %2. Only the standard attributes can appear.</source>
456 <translation>원소 %2에 속성 %1을(를) 사용할 수 없습니다. 표준 속성만 사용할 수 있습니다.</translation>
457 </message>
458 <message>
459 <source>Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes.</source>
460 <translation>원소 %2에 속성 %1을(를) 사용할 수 없습니다. 속성 %3 및 표준 속성만 사용할 수 있습니다.</translation>
461 </message>
462 <message>
463 <source>Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes.</source>
464 <translation>원소 %2에 속성 %1을(를) 사용할 수 없습니다. 속성 %3, %4 및 표준 속성을 사용할 수 있습니다.</translation>
465 </message>
466 <message>
467 <source>Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes.</source>
468 <translation>원소 %2에 속성 %1을(를) 사용할 수 없습니다. 속성 %3 및 표준 속성을 사용할 수 있습니다.</translation>
469 </message>
470 <message>
471 <source>XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is.</source>
472 <translation>XSL-T 원소의 XSL-T 속성은 %1을(를) 포함한 XSL-T 네임스페이스가 아닌 null 네임스페이스에 있어야 합니다.</translation>
473 </message>
474 <message>
475 <source>The attribute %1 must appear on element %2.</source>
476 <translation>원소 %2에는 속성 %1을(를) 반드시 정의해야 합니다.</translation>
477 </message>
478 <message>
479 <source>The element with local name %1 does not exist in XSL-T.</source>
480 <translation>로컬 이름이 %1인 원소가 XSL-T에 존재하지 않습니다.</translation>
481 </message>
482 <message>
483 <source>The variable %1 is unused</source>
484 <translation>변수 %1이(가) 사용되지 않습니다</translation>
485 </message>
486 <message>
487 <source>W3C XML Schema identity constraint selector</source>
488 <translation>W3C XML 스키마 아이덴티티 제약 조건 선택자</translation>
489 </message>
490 <message>
491 <source>W3C XML Schema identity constraint field</source>
492 <translation>W3C XML 스키마 아이덴티티 제약 조건 필드</translation>
493 </message>
494 <message>
495 <source>A construct was encountered which is disallowed in the current language(%1).</source>
496 <translation>현재 언어(%1)에 사용할 수 없는 생성자가 있습니다.</translation>
497 </message>
498 <message>
499 <source>%1 is an unknown schema type.</source>
500 <translation>%1은(는) 알 수 없는 스키마 형식입니다.</translation>
501 </message>
502 <message>
503 <source>A template with name %1 has already been declared.</source>
504 <translation>이름이 %1인 템플릿이 이미 선언되었습니다.</translation>
505 </message>
506 <message>
507 <source>%1 is not a valid numeric literal.</source>
508 <translation>%1은(는) 올바른 숫자 리터럴이 아닙니다.</translation>
509 </message>
510 <message>
511 <source>Only one %1 declaration can occur in the query prolog.</source>
512 <translation>질의 선두부에는 %1 선언이 하나만 올 수 있습니다.</translation>
513 </message>
514 <message>
515 <source>The initialization of variable %1 depends on itself</source>
516 <translation>변수 %1의 초기화 과정이 자기 자신에게 의존함</translation>
517 </message>
518 <message>
519 <source>No variable with name %1 exists</source>
520 <translation>이름이 %1인 변수가 없음</translation>
521 </message>
522 <message>
523 <source>Version %1 is not supported. The supported XQuery version is 1.0.</source>
524 <translation>버전 %1은(는) 지원하지 않습니다. 지원하는 XQuery 버전은 1.0입니다.</translation>
525 </message>
526 <message>
527 <source>The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2.</source>
528 <translation>%1 인코딩은 올바르지 않습니다. 라틴 알파벳만 포함해야 하며, 공백이 들어가지 않아야 하며, 정규 표현식 %2와(과) 일치해야 합니다.</translation>
529 </message>
530 <message>
531 <source>No function with signature %1 is available</source>
532 <translation>선언이 %1인 함수가 없습니다</translation>
533 </message>
534 <message>
535 <source>A default namespace declaration must occur before function, variable, and option declarations.</source>
536 <translation>기본 네임스페이스 선언은 함수, 변수, 옵션 선언 이전에 와야 합니다.</translation>
537 </message>
538 <message>
539 <source>Namespace declarations must occur before function, variable, and option declarations.</source>
540 <translation>네임스페이스 선언은 함수, 변수, 옵션 선언 이전에 와야 합니다.</translation>
541 </message>
542 <message>
543 <source>Module imports must occur before function, variable, and option declarations.</source>
544 <translation>모듈 가져오기는 함수, 변수, 옵션 선언 이전에 와야 합니다.</translation>
545 </message>
546 <message>
547 <source>The keyword %1 cannot occur with any other mode name.</source>
548 <translation>키워드 %1은(는) 다른 모드 이름과 같이 사용할 수 없습니다.</translation>
549 </message>
550 <message>
551 <source>The value of attribute %1 must be of type %2, which %3 isn&apos;t.</source>
552 <translation>속성 %1의 값은 %2 형식이어야 하지만, %3은(는) 그렇지 않습니다.</translation>
553 </message>
554 <message>
555 <source>It is not possible to redeclare prefix %1.</source>
556 <translation>접두사 %1을(를) 다시 선언할 수 없습니다.</translation>
557 </message>
558 <message>
559 <source>The prefix %1 can not be bound. By default, it is already bound to the namespace %2.</source>
560 <translation>접두사 %1을(를) 바인딩할 수 없습니다. 기본값으로 네임스페이스 %2에 바인딩되어 있습니다.</translation>
561 </message>
562 <message>
563 <source>Prefix %1 is already declared in the prolog.</source>
564 <translation>접두사 %1이(가) 선두부에 이미 선언되어 있습니다.</translation>
565 </message>
566 <message>
567 <source>The name of an option must have a prefix. There is no default namespace for options.</source>
568 <translation>옵션의 이름은 접두사를 포함해야 합니다. 옵션에는 기본 네임스페이스가 없습니다.</translation>
569 </message>
570 <message>
571 <source>The Schema Import feature is not supported, and therefore %1 declarations cannot occur.</source>
572 <translation>스키마 가져오기 기능은 지원하지 않으며, %1 선언이 올 수 없습니다.</translation>
573 </message>
574 <message>
575 <source>The target namespace of a %1 cannot be empty.</source>
576 <translation>%1의 대상 네임스페이스가 비어 있으면 안 됩니다.</translation>
577 </message>
578 <message>
579 <source>The module import feature is not supported</source>
580 <translation>모듈 가져오기 기능은 지원하지 않습니다</translation>
581 </message>
582 <message>
583 <source>A variable with name %1 has already been declared.</source>
584 <translation>이름이 %1인 변수가 이미 선언되었습니다.</translation>
585 </message>
586 <message>
587 <source>No value is available for the external variable with name %1.</source>
588 <translation>이름이 %1인 외부 변수의 사용할 수 있는 값이 없습니다.</translation>
589 </message>
590 <message>
591 <source>A stylesheet function must have a prefixed name.</source>
592 <translation>스타일시트 함수는 접두사가 있는 이름을 가져야 합니다.</translation>
593 </message>
594 <message>
595 <source>The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this)</source>
596 <translation>사용자 정의 함수의 네임스페이스는 비어 있을 수 없습니다. (이러한 경우에 사용할 수 있는 미리 정의된 접두사 %1을(를) 사용하십시오)</translation>
597 </message>
598 <message>
599 <source>The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases.</source>
600 <translation>네임스페이스 %1은(는) 예약되어 있으므로 사용자 정의 함수에서 사용할 수 없습니다. 이러한 경우에 사용할 수 있는 미리 정의된 접두사 %2을(를) 사용하십시오.</translation>
601 </message>
602 <message>
603 <source>The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2</source>
604 <translation>라이브러리 모듈에 있는 사용자 정의 함수의 네임스페이스는 모듈의 네임스페이스와 같아야 합니다. 즉 %2이(가) 아니라 %1이어야 합니다</translation>
605 </message>
606 <message>
607 <source>A function already exists with the signature %1.</source>
608 <translation>선언이 %1인 함수가 이미 존재합니다.</translation>
609 </message>
610 <message>
611 <source>No external functions are supported. All supported functions can be used directly, without first declaring them as external</source>
612 <translation>외부 함수는 지원하지 않습니다. 모든 지원하는 함수는 external로 선언하지 않고 바로 사용할 수 있습니다</translation>
613 </message>
614 <message>
615 <source>An argument with name %1 has already been declared. Every argument name must be unique.</source>
616 <translation>이름이 %1인 인자가 이미 선언되었습니다. 모든 인자의 이름은 달라야 합니다.</translation>
617 </message>
618 <message>
619 <source>When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal.</source>
620 <translation>함수 %1이(가) 패턴 안쪽에서 일치하는 데 사용되는 경우에는 인자 형식이 변수 참조나 문자열 리터럴이어야 합니다.</translation>
621 </message>
622 <message>
623 <source>In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching.</source>
624 <translation>XSL-T 패턴에서 함수 %1을(를) 일치하는 데 사용하려면 첫 번째 인자는 문자열 리터럴이어야 합니다.</translation>
625 </message>
626 <message>
627 <source>In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching.</source>
628 <translation>XSL-T 패턴에서 함수 %1을(를) 일치하는 데 사용하려면 첫 번째 인자 형식이 변수 참조나 문자열 리터럴이어야 합니다.</translation>
629 </message>
630 <message>
631 <source>In an XSL-T pattern, function %1 cannot have a third argument.</source>
632 <translation>XSL-T 패턴에서 함수 %1에는 세 번째 인자가 올 수 없습니다.</translation>
633 </message>
634 <message>
635 <source>In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching.</source>
636 <translation>XSL-T 패턴에서 일치하는 데에는 함수 %1, %2만 사용할 수 있으며, %3은(는) 사용할 수 없습니다.</translation>
637 </message>
638 <message>
639 <source>In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can.</source>
640 <translation>XSL-T 패턴에서 축 %2, %3만 사용할 수 있으며, %1은(는) 사용할 수 없습니다.</translation>
641 </message>
642 <message>
643 <source>%1 is an invalid template mode name.</source>
644 <translation>%1은(는) 잘못된 템플릿 모드 이름입니다.</translation>
645 </message>
646 <message>
647 <source>The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide.</source>
648 <translation>for 표현식에서 사용되는 바운딩된 변수의 이름은 위치 변수의 이름과 달라야 합니다. 따라서 두 변수 %1이(가) 충돌합니다.</translation>
649 </message>
650 <message>
651 <source>The Schema Validation Feature is not supported. Hence, %1-expressions may not be used.</source>
652 <translation>스키마 검사 기능은 지원하지 않습니다. 따라서 %1 표현식은 사용할 수 없습니다.</translation>
653 </message>
654 <message>
655 <source>None of the pragma expressions are supported. Therefore, a fallback expression must be present</source>
656 <translation>pragma 표현식은 지원하지 않습니다. 따라서 폴백 표현식이 필요합니다</translation>
657 </message>
658 <message>
659 <source>Each name of a template parameter must be unique; %1 is duplicated.</source>
660 <translation>템플릿 인자의 이름은 중복되지 않아야 하므로 같은 이름 %1이(가) 충돌합니다.</translation>
661 </message>
662 <message>
663 <source>The %1-axis is unsupported in XQuery</source>
664 <translation>XQuery에서 %1 축은 지원하지 않음</translation>
665 </message>
666 <message>
667 <source>No function with name %1 is available.</source>
668 <translation>이름이 %1인 함수를 사용할 수 없습니다.</translation>
669 </message>
670 <message>
671 <source>The namespace URI cannot be the empty string when binding to a prefix, %1.</source>
672 <translation>접두사 %1에 바인딩될 때 네임스페이스 URI는 빈 문자열일 수 없습니다.</translation>
673 </message>
674 <message>
675 <source>%1 is an invalid namespace URI.</source>
676 <translation>%1은(는) 잘못된 네임스페이스 URI입니다.</translation>
677 </message>
678 <message>
679 <source>It is not possible to bind to the prefix %1</source>
680 <translation>접두사 %1에 바인딩할 수 없습니다</translation>
681 </message>
682 <message>
683 <source>Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
684 <translation>네임스페이스 %1은(는) %2에만 바인딩할 수 있습니다(미리 선언해야 합니다).</translation>
685 </message>
686 <message>
687 <source>Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
688 <translation>접두사 %1은(는) %2에만 바인딩할 수 있습니다(미리 선언해야 합니다).</translation>
689 </message>
690 <message>
691 <source>Two namespace declaration attributes have the same name: %1.</source>
692 <translation>두 네임스페이스 선언 속성의 이름이 중복됩니다: %1.</translation>
693 </message>
694 <message>
695 <source>The namespace URI must be a constant and cannot use enclosed expressions.</source>
696 <translation>네임스페이스 URI는 상수여야 하며 내장된 표현식을 사용할 수 없습니다.</translation>
697 </message>
698 <message>
699 <source>An attribute with name %1 has already appeared on this element.</source>
700 <translation>이름이 %1인 속성이 이 원소에 이미 나타났습니다.</translation>
701 </message>
702 <message>
703 <source>A direct element constructor is not well-formed. %1 is ended with %2.</source>
704 <translation>직접 원소 생성자의 형식이 올바르지 않습니다. %1이(가) %2(으)로 끝납니다.</translation>
705 </message>
706 <message>
707 <source>The name %1 does not refer to any schema type.</source>
708 <translation>이름 %1은(는) 어떠한 스키마 형식도 참조하지 않습니다.</translation>
709 </message>
710 <message>
711 <source>%1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works.</source>
712 <translation>%1은(는) 복합 형식입니다. 복합 형식으로 캐스팅은 불가능하지만, %2와(과) 같은 원자적 형식으로의 캐스팅은 가능합니다.</translation>
713 </message>
714 <message>
715 <source>%1 is not an atomic type. Casting is only possible to atomic types.</source>
716 <translation>%1은(는) 원자적 형식이 아닙니다. 원자적 형식으로만 변환할 수 있습니다.</translation>
717 </message>
718 <message>
719 <source>%1 is not a valid name for a processing-instruction.</source>
720 <translation>%1은(는) 올바른 처리 방법 이름이 아닙니다.</translation>
721 </message>
722 <message>
723 <source>%1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported.</source>
724 <translation>%1은(는) 범위 내에 있는 속성 선언에 존재하지 않습니다. 스키마 가져오기 기능은 지원하지 않습니다.</translation>
725 </message>
726 <message>
727 <source>The name of an extension expression must be in a namespace.</source>
728 <translation>확장 표현식의 이름은 네임스페이스 안에 있어야 합니다.</translation>
729 </message>
730 <message>
731 <source>Element %1 is not allowed at this location.</source>
732 <translation>이 위치에 원소 %1이(가) 올 수 없습니다.</translation>
733 </message>
734 <message>
735 <source>Text nodes are not allowed at this location.</source>
736 <translation>이 위치에 텍스트 노드가 올 수 없습니다.</translation>
737 </message>
738 <message>
739 <source>Parse error: %1</source>
740 <translation>처리 오류: %1</translation>
741 </message>
742 <message>
743 <source>The value of the XSL-T version attribute must be a value of type %1, which %2 isn&apos;t.</source>
744 <translation>XSL-T 버전 속성의 값은 %1 형식이어야 하며, %2은(는) 이 형식이 아닙니다.</translation>
745 </message>
746 <message>
747 <source>Running an XSL-T 1.0 stylesheet with a 2.0 processor.</source>
748 <translation>XSL-T 1.0 스타일시트를 2.0 프로세서로 실행하고 있습니다.</translation>
749 </message>
750 <message>
751 <source>Unknown XSL-T attribute %1.</source>
752 <translation>알 수 없는 XSL-T 속성 %1.</translation>
753 </message>
754 <message>
755 <source>Attribute %1 and %2 are mutually exclusive.</source>
756 <translation>속성 %1와(과) %2은(는) 상호 배제적입니다.</translation>
757 </message>
758 <message>
759 <source>In a simplified stylesheet module, attribute %1 must be present.</source>
760 <translation>간단한 스타일시트 모듈에서 속성 %1은(는) 반드시 존재해야 합니다.</translation>
761 </message>
762 <message>
763 <source>If element %1 has no attribute %2, it cannot have attribute %3 or %4.</source>
764 <translation>원소 %1에 속성 %2이(가) 없으면, 속성 %3 또는 %4을(를) 가질 수 없습니다.</translation>
765 </message>
766 <message>
767 <source>Element %1 must have at least one of the attributes %2 or %3.</source>
768 <translation>원소 %1에는 %2, %3 중 최소한 하나의 속성이 있어야 합니다.</translation>
769 </message>
770 <message>
771 <source>At least one mode must be specified in the %1-attribute on element %2.</source>
772 <translation>원소 %2의 %1 속성에는 최소한 하나의 모드가 지정되어야 합니다.</translation>
773 </message>
774 <message>
775 <source>Element %1 must come last.</source>
776 <translation>원소 %1은(는) 맨 마지막에 와야 합니다.</translation>
777 </message>
778 <message>
779 <source>At least one %1-element must occur before %2.</source>
780 <translation>최소한 하나의 %1 원소가 %2 이전에 와야 합니다.</translation>
781 </message>
782 <message>
783 <source>Only one %1-element can appear.</source>
784 <translation>%1 원소는 최대 하나만 올 수 있습니다.</translation>
785 </message>
786 <message>
787 <source>At least one %1-element must occur inside %2.</source>
788 <translation>%2 안에 최소한 하나의 %1 원소가 와야 합니다.</translation>
789 </message>
790 <message>
791 <source>When attribute %1 is present on %2, a sequence constructor cannot be used.</source>
792 <translation>속성 %1이(가) %2에 존재하면 시퀀스 생성자를 사용할 수 없습니다.</translation>
793 </message>
794 <message>
795 <source>Element %1 must have either a %2-attribute or a sequence constructor.</source>
796 <translation>원소 %1은(는) %2 속성이나 시퀀스 생성자 중 하나를 가져야 합니다.</translation>
797 </message>
798 <message>
799 <source>When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor.</source>
800 <translation>인자가 필요한 경우에는 %1 속성이나 시퀀스 생성자를 통해서 기본값을 지정할 수 없습니다.</translation>
801 </message>
802 <message>
803 <source>Element %1 cannot have children.</source>
804 <translation>원소 %1은(는) 자식을 가질 수 없습니다.</translation>
805 </message>
806 <message>
807 <source>Element %1 cannot have a sequence constructor.</source>
808 <translation>원소 %1은(는) 시퀀스 생성자를 가질 수 없습니다.</translation>
809 </message>
810 <message>
811 <source>The attribute %1 cannot appear on %2, when it is a child of %3.</source>
812 <translation>속성 %1은(는) %3의 자식일 때 %2에 나타날 수 없습니다.</translation>
813 </message>
814 <message>
815 <source>A parameter in a function cannot be declared to be a tunnel.</source>
816 <translation>함수의 인자는 터널로 선언될 수 없습니다.</translation>
817 </message>
818 <message>
819 <source>This processor is not Schema-aware and therefore %1 cannot be used.</source>
820 <translation>이 프로세서는 스키마를 인지하지 못하므로 %1을(를) 사용할 수 없습니다.</translation>
821 </message>
822 <message>
823 <source>Top level stylesheet elements must be in a non-null namespace, which %1 isn&apos;t.</source>
824 <translation>최상위 스타일시트 원소는 비어 있지 않은 네임스페이스에 있어야 하지만 %1은(는) 그렇지 않습니다.</translation>
825 </message>
826 <message>
827 <source>The value for attribute %1 on element %2 must either be %3 or %4, not %5.</source>
828 <translation>원소 %2의 속성 %1의 값은 %3, %4여야 하며, %5이(가) 올 수 없습니다.</translation>
829 </message>
830 <message>
831 <source>Attribute %1 cannot have the value %2.</source>
832 <translation>속성 %1은(는) 값 %2을(를) 가질 수 없습니다.</translation>
833 </message>
834 <message>
835 <source>The attribute %1 can only appear on the first %2 element.</source>
836 <translation>속성 %1은(는) 첫 %2 원소에만 올 수 있습니다.</translation>
837 </message>
838 <message>
839 <source>At least one %1 element must appear as child of %2.</source>
840 <translation>%2 원소의 자식으로 최소한 하나의 %1 원소가 와야 합니다.</translation>
841 </message>
842 <message>
843 <source>Empty particle cannot be derived from non-empty particle.</source>
844 <translation>비어 있지 않은 입자에서 비어 있는 입자가 파생될 수 없습니다.</translation>
845 </message>
846 <message>
847 <source>Derived particle is missing element %1.</source>
848 <translation>파생된 입자에 %1 원소가 없습니다.</translation>
849 </message>
850 <message>
851 <source>Derived element %1 is missing value constraint as defined in base particle.</source>
852 <translation>파생된 원소 %1에는 기본 입자에 선언되어 있는 값 제약 조건이 없습니다.</translation>
853 </message>
854 <message>
855 <source>Derived element %1 has weaker value constraint than base particle.</source>
856 <translation>파생된 원소 %1은(는) 기본 입자보다 약한 값 제약 조건을 가지고 있습니다.</translation>
857 </message>
858 <message>
859 <source>Fixed value constraint of element %1 differs from value constraint in base particle.</source>
860 <translation>원소 %1의 고정 값 제약 조건은 부모 입자의 값 제약 조건과 다릅니다.</translation>
861 </message>
862 <message>
863 <source>Derived element %1 cannot be nillable as base element is not nillable.</source>
864 <translation>기본 원소에 nil 값이 올 수 없으므로 파생된 원소 %1에도 nil 값이 올 수 없습니다.</translation>
865 </message>
866 <message>
867 <source>Block constraints of derived element %1 must not be more weaker than in the base element.</source>
868 <translation>파생된 원소 %1의 블럭 제약 조건은 기본 원소의 제약 조건보다 약할 수 없습니다.</translation>
869 </message>
870 <message>
871 <source>Simple type of derived element %1 cannot be validly derived from base element.</source>
872 <translation>파생된 원소 %1의 간단한 형식은 기본 원소에서 올바르게 파생될 수 없습니다.</translation>
873 </message>
874 <message>
875 <source>Complex type of derived element %1 cannot be validly derived from base element.</source>
876 <translation>파생된 원소 %1의 복합 형식은 기본 원소에서 올바르게 파생될 수 없습니다.</translation>
877 </message>
878 <message>
879 <source>Element %1 is missing in derived particle.</source>
880 <translation>원소 %1이(가) 파생된 입자에 없습니다.</translation>
881 </message>
882 <message>
883 <source>Element %1 does not match namespace constraint of wildcard in base particle.</source>
884 <translation>원소 %1은(는) 기본 입자의 와일드카드 네임스페이스 제약 조건과 일치하지 않습니다.</translation>
885 </message>
886 <message>
887 <source>Wildcard in derived particle is not a valid subset of wildcard in base particle.</source>
888 <translation>파생 입자의 와일드카드는 기본 입자의 와일드카드의 올바른 부분 집합이 아닙니다.</translation>
889 </message>
890 <message>
891 <source>processContent of wildcard in derived particle is weaker than wildcard in base particle.</source>
892 <translation>파생 입자의 와일드카드의 processContent는 기본 입자의 와일드카드보다 약합니다.</translation>
893 </message>
894 <message>
895 <source>Derived particle allows content that is not allowed in the base particle.</source>
896 <translation>기본 입자에서 허용하지 않는 내용이 파생 입자에 올 수 있습니다.</translation>
897 </message>
898 <message>
899 <source>%1 has inheritance loop in its base type %2.</source>
900 <translation>%1의 부모 형식 %2에서 상속 루프가 발견되었습니다.</translation>
901 </message>
902 <message>
903 <source>Circular inheritance of base type %1.</source>
904 <translation>기본 형식 %1의 순환 상속입니다.</translation>
905 </message>
906 <message>
907 <source>Circular inheritance of union %1.</source>
908 <translation>공용체 %1의 순환 상속입니다.</translation>
909 </message>
910 <message>
911 <source>%1 is not allowed to derive from %2 by restriction as the latter defines it as final.</source>
912 <translation>%1은(는) %2에서 final로 선언되었기 때문에 제한으로 분기될 수 없습니다.</translation>
913 </message>
914 <message>
915 <source>%1 is not allowed to derive from %2 by extension as the latter defines it as final.</source>
916 <translation>%1은(는) %2에서 final로 선언되었기 때문에 확장으로 분기될 수 없습니다.</translation>
917 </message>
918 <message>
919 <source>Base type of simple type %1 cannot be complex type %2.</source>
920 <translation>간단한 형식 %1의 기본 형식은 복합 형식 %2일 수 없습니다.</translation>
921 </message>
922 <message>
923 <source>Simple type %1 cannot have direct base type %2.</source>
924 <translation>간단한 형식 %1은(는) 직접적인 기본 형식 %2을(를) 가질 수 없습니다.</translation>
925 </message>
926 <message>
927 <source>Simple type %1 is not allowed to have base type %2.</source>
928 <translation>간단한 형식 %1에는 기본 형식 %2가 올 수 없습니다.</translation>
929 </message>
930 <message>
931 <source>Simple type %1 can only have simple atomic type as base type.</source>
932 <translation>간단한 형식 %1은(는) 간단한 원자적 형식만을 기본 형식으로 가질 수 있습니다.</translation>
933 </message>
934 <message>
935 <source>Simple type %1 cannot derive from %2 as the latter defines restriction as final.</source>
936 <translation>형식 %2이(가) final로 선언되었으므로, 간단한 형식 %1은(는) 여기에서 파생될 수 없습니다.</translation>
937 </message>
938 <message>
939 <source>Variety of item type of %1 must be either atomic or union.</source>
940 <translation>%1 형식의 항목의 파생형은 원자적이거나 공용체여야 합니다.</translation>
941 </message>
942 <message>
943 <source>Variety of member types of %1 must be atomic or union.</source>
944 <translation>%1 형식의 항목의 파생형은 원자적이거나 공용체여야 합니다.</translation>
945 </message>
946 <message>
947 <source>%1 is not allowed to derive from %2 by list as the latter defines it as final.</source>
948 <translation>%1은(는) %2에서 final로 선언되었기 때문에 목록으로 분기될 수 없습니다.</translation>
949 </message>
950 <message>
951 <source>Simple type %1 is only allowed to have %2 facet.</source>
952 <translation>간단한 형식 %1은(는) %2 패싯만 포함할 수 있습니다.</translation>
953 </message>
954 <message>
955 <source>Base type of simple type %1 must have variety of type list.</source>
956 <translation>간단한 형식 %1의 기본 형식은 파생형 목록을 가져야 합니다.</translation>
957 </message>
958 <message>
959 <source>Base type of simple type %1 has defined derivation by restriction as final.</source>
960 <translation>간단한 형식 %1의 기본 형식이 final로 선언되어 있어서 파생이 제한되어 있습니다.</translation>
961 </message>
962 <message>
963 <source>Item type of base type does not match item type of %1.</source>
964 <translation>기본 형식의 항목 형식이 %1의 항목 형식과 일치하지 않습니다.</translation>
965 </message>
966 <message>
967 <source>Simple type %1 contains not allowed facet type %2.</source>
968 <translation>간단한 형식 %1에 허용되지 않는 패싯 형식 %2이(가) 존재합니다.</translation>
969 </message>
970 <message>
971 <source>%1 is not allowed to derive from %2 by union as the latter defines it as final.</source>
972 <translation>%1은(는) %2에서 final로 선언되었기 때문에 공용체로 분기될 수 없습니다.</translation>
973 </message>
974 <message>
975 <source>%1 is not allowed to have any facets.</source>
976 <translation>%1에는 패싯을 추가할 수 없습니다.</translation>
977 </message>
978 <message>
979 <source>Base type %1 of simple type %2 must have variety of union.</source>
980 <translation>간단한 형식 %2의 기본 형식 %1에는 공용체의 파생형이 있어야 합니다.</translation>
981 </message>
982 <message>
983 <source>Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute.</source>
984 <translation>간단한 형식 %2의 기본 형식 %1에는 %3 속성에 제한을 걸 수 없습니다.</translation>
985 </message>
986 <message>
987 <source>Member type %1 cannot be derived from member type %2 of %3&apos;s base type %4.</source>
988 <translation>%3의 기본 형식 %4의 형식 %2 멤버 형식에서 멤버 형식 %1을(를) 파생할 수 없습니다.</translation>
989 </message>
990 <message>
991 <source>Derivation method of %1 must be extension because the base type %2 is a simple type.</source>
992 <translation>기본 형식 %2이(가) 간단한 형식이므로 %1의 파생 방식은 확장이어야 합니다.</translation>
993 </message>
994 <message>
995 <source>Complex type %1 has duplicated element %2 in its content model.</source>
996 <translation>복합 형식 %1의 내용 모델에 중복된 원소 %2이(가) 있습니다.</translation>
997 </message>
998 <message>
999 <source>Complex type %1 has non-deterministic content.</source>
1000 <translation>복합 형식 %1에 비 결정적 내용이 있습니다.</translation>
1001 </message>
1002 <message>
1003 <source>Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3.</source>
1004 <translation>복합 형식 %1의 속성이 기본 형식 %2의 속성의 올바른 확장이 아닙니다: %3.</translation>
1005 </message>
1006 <message>
1007 <source>Content model of complex type %1 is not a valid extension of content model of %2.</source>
1008 <translation>복합 형식 %1의 내용 모델이 %2의 내용 모델의 올바른 확장이 아닙니다.</translation>
1009 </message>
1010 <message>
1011 <source>Complex type %1 must have simple content.</source>
1012 <translation>복합 형식 %1에는 간단한 내용이 있어야 합니다.</translation>
1013 </message>
1014 <message>
1015 <source>Complex type %1 must have the same simple type as its base class %2.</source>
1016 <translation>복합 형식 %1은(는) 기본 클래스 %2와(과) 같은 간단한 형식이 필요합니다.</translation>
1017 </message>
1018 <message>
1019 <source>Complex type %1 cannot be derived from base type %2%3.</source>
1020 <translation>복합 형식 %1은(는) 기본 형식 %2%3에서 파생될 수 없습니다.</translation>
1021 </message>
1022 <message>
1023 <source>Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3.</source>
1024 <translation>복합 형식 %1의 속성에 기본 형식 %2의 속성에서 온 올바른 제한이 없음: %3.</translation>
1025 </message>
1026 <message>
1027 <source>Complex type %1 with simple content cannot be derived from complex base type %2.</source>
1028 <translation>간단한 내용이 있는 복합 형식 %1은(는) 복합 기본 형식 %2에서 파생될 수 없습니다.</translation>
1029 </message>
1030 <message>
1031 <source>Item type of simple type %1 cannot be a complex type.</source>
1032 <translation>간단한 형식 %1의 항목 형식은 복합 형식이 될 수 없습니다.</translation>
1033 </message>
1034 <message>
1035 <source>Member type of simple type %1 cannot be a complex type.</source>
1036 <translation>간단한 형식 %1의 구성원 형식은 복합 형식이 될 수 없습니다.</translation>
1037 </message>
1038 <message>
1039 <source>%1 is not allowed to have a member type with the same name as itself.</source>
1040 <translation>%1에는 자기 자신을 종류로 갖는 구성 요소를 추가할 수 없습니다.</translation>
1041 </message>
1042 <message>
1043 <source>%1 facet collides with %2 facet.</source>
1044 <translation>%1와(과) %2 패싯이 충돌합니다.</translation>
1045 </message>
1046 <message>
1047 <source>%1 facet must have the same value as %2 facet of base type.</source>
1048 <translation>%1 패싯은 기본 형식의 패싯 %2와(과) 같은 값을 가져야 합니다.</translation>
1049 </message>
1050 <message>
1051 <source>%1 facet must be equal or greater than %2 facet of base type.</source>
1052 <translation>%1 패싯은 기본 형식의 %2 패싯의 값보다 크거나 같아야 합니다.</translation>
1053 </message>
1054 <message>
1055 <source>%1 facet must be less than or equal to %2 facet of base type.</source>
1056 <translation>%1 패싯은 기본 형식의 %2 패싯의 값보다 작거나 같아야 합니다.</translation>
1057 </message>
1058 <message>
1059 <source>%1 facet contains invalid regular expression</source>
1060 <translation>%1 패싯에 잘못된 정규 표현식이 있음</translation>
1061 </message>
1062 <message>
1063 <source>Unknown notation %1 used in %2 facet.</source>
1064 <translation>%2 패싯에 알 수 없는 표기법 %1이(가) 사용되었습니다.</translation>
1065 </message>
1066 <message>
1067 <source>%1 facet contains invalid value %2: %3.</source>
1068 <translation>%1 패싯에 잘못된 값 %2이(가) 포함됨: %3.</translation>
1069 </message>
1070 <message>
1071 <source>%1 facet cannot be %2 or %3 if %4 facet of base type is %5.</source>
1072 <translation>%1 패싯은 기본 형식의 %4 패싯이 %5 형식일 때 %2, %3일 수 없습니다.</translation>
1073 </message>
1074 <message>
1075 <source>%1 facet cannot be %2 if %3 facet of base type is %4.</source>
1076 <translation>%1 패싯은 기본 형식의 %3 패싯이 %4 형식일 때 %2일 수 없습니다.</translation>
1077 </message>
1078 <message>
1079 <source>%1 facet must be less than or equal to %2 facet.</source>
1080 <translation>%1 패싯은 %2 패싯보다 작거나 같아야 합니다.</translation>
1081 </message>
1082 <message>
1083 <source>%1 facet must be less than %2 facet of base type.</source>
1084 <translation>%1 패싯은 기본 형식의 %2 패싯보다 작아야 합니다.</translation>
1085 </message>
1086 <message>
1087 <source>%1 facet and %2 facet cannot appear together.</source>
1088 <translation>%1 패싯과 %2 패싯은 같이 등장할 수 없습니다.</translation>
1089 </message>
1090 <message>
1091 <source>%1 facet must be greater than %2 facet of base type.</source>
1092 <translation>%1 패싯은 기본 형식의 %2 패싯보다 커야 합니다.</translation>
1093 </message>
1094 <message>
1095 <source>%1 facet must be less than %2 facet.</source>
1096 <translation>%1 패싯은 %2 패싯보다 작아야 합니다.</translation>
1097 </message>
1098 <message>
1099 <source>%1 facet must be greater than or equal to %2 facet of base type.</source>
1100 <translation>%1 패싯은 기본 형식의 %2 패싯보다 크거나 같아야 합니다.</translation>
1101 </message>
1102 <message>
1103 <source>Simple type contains not allowed facet %1.</source>
1104 <translation>간단한 형식에는 패싯 %1이(가) 올 수 없습니다.</translation>
1105 </message>
1106 <message>
1107 <source>%1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list.</source>
1108 <translation>목록에서 파생된 경우 %1, %2, %3, %4, %5, %6 패싯은 허용되지 않습니다.</translation>
1109 </message>
1110 <message>
1111 <source>Only %1 and %2 facets are allowed when derived by union.</source>
1112 <translation>공용체에서 파생되었을 때에는 %1, %2 패싯만 사용할 수 있습니다.</translation>
1113 </message>
1114 <message>
1115 <source>%1 contains %2 facet with invalid data: %3.</source>
1116 <translation>%1에 잘못된 데이터가 들어 있는 %2 패싯이 있음: %3.</translation>
1117 </message>
1118 <message>
1119 <source>Attribute group %1 contains attribute %2 twice.</source>
1120 <translation>속성 그룹 %1에 속성 %2이(가) 두 번 들어 있습니다.</translation>
1121 </message>
1122 <message>
1123 <source>Attribute group %1 contains two different attributes that both have types derived from %2.</source>
1124 <translation>속성 그룹 %1에 %2에서 파생된 형식을 포함하는 두 개의 서로 다른 속성이 있습니다.</translation>
1125 </message>
1126 <message>
1127 <source>Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3.</source>
1128 <translation>속성 그룹 %1에 값 제약 조건이 있지만 %3 형식에서 파생된 형식을 갖는 %2 속성이 있습니다.</translation>
1129 </message>
1130 <message>
1131 <source>Complex type %1 contains attribute %2 twice.</source>
1132 <translation>복합 형식 %1에 속성 %2이(가) 두 번 들어 있습니다.</translation>
1133 </message>
1134 <message>
1135 <source>Complex type %1 contains two different attributes that both have types derived from %2.</source>
1136 <translation>복합 형식 %1에 %2에서 파생된 형식을 포함하는 두 개의 서로 다른 속성이 있습니다.</translation>
1137 </message>
1138 <message>
1139 <source>Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3.</source>
1140 <translation>복합 형식 %1에 값 제약 조건이 있지만 %3 형식에서 파생된 형식을 갖는 %2 속성이 있습니다.</translation>
1141 </message>
1142 <message>
1143 <source>Element %1 is not allowed to have a value constraint if its base type is complex.</source>
1144 <translation>기본 형식이 complex인 경우 원소 %1은(는) 값 제약 조건을 가질 수 없습니다.</translation>
1145 </message>
1146 <message>
1147 <source>Element %1 is not allowed to have a value constraint if its type is derived from %2.</source>
1148 <translation>형식이 %2에서 파생된 경우 원소 %1은(는) 값 제약 조건을 가질 수 없습니다.</translation>
1149 </message>
1150 <message>
1151 <source>Value constraint of element %1 is not of elements type: %2.</source>
1152 <translation>원소 %1의 값 제약 조건이 elements 형식이 아님: %2.</translation>
1153 </message>
1154 <message>
1155 <source>Element %1 is not allowed to have substitution group affiliation as it is no global element.</source>
1156 <translation>원소 %1은(는) 전역 원소가 아니므로 대체 그룹 친화성을 가질 수 없습니다.</translation>
1157 </message>
1158 <message>
1159 <source>Type of element %1 cannot be derived from type of substitution group affiliation.</source>
1160 <translation>원소 %1의 형식은 대체 그룹 친화력의 형식에서 파생될 수 없습니다.</translation>
1161 </message>
1162 <message>
1163 <source>Value constraint of attribute %1 is not of attributes type: %2.</source>
1164 <translation>속성 %1의 값 제약이 attributes 형식이 아님: %2.</translation>
1165 </message>
1166 <message>
1167 <source>Attribute %1 has value constraint but has type derived from %2.</source>
1168 <translation>속성 %1에는 값 제약이 있지만 %2 형식에서 파생된 형식을 가지고 있습니다.</translation>
1169 </message>
1170 <message>
1171 <source>%1 attribute in derived complex type must be %2 like in base type.</source>
1172 <translation>파생된 복합체 형식의 %1 속성은 기본 형식처럼 %2 형식의 값을 가져야 합니다.</translation>
1173 </message>
1174 <message>
1175 <source>Attribute %1 in derived complex type must have %2 value constraint like in base type.</source>
1176 <translation>파생된 복합 형식의 속성 %1은(는) 기본 형식처럼 값 제약 %2을(를) 가져야 합니다.</translation>
1177 </message>
1178 <message>
1179 <source>Attribute %1 in derived complex type must have the same %2 value constraint like in base type.</source>
1180 <translation>파생된 복합 형식의 속성 %1은(는) 기본 형식과 같은 값 제약 %2을(를) 가져야 합니다.</translation>
1181 </message>
1182 <message>
1183 <source>Attribute %1 in derived complex type must have %2 value constraint.</source>
1184 <translation>파생된 복합체 형식의 %1 속성은 %2 형식의 값 제약을 가져야 합니다.</translation>
1185 </message>
1186 <message>
1187 <source>processContent of base wildcard must be weaker than derived wildcard.</source>
1188 <translation>기본 와일드카드의 processContent는 파생 와일드카드보다 약해야 합니다.</translation>
1189 </message>
1190 <message>
1191 <source>Element %1 exists twice with different types.</source>
1192 <translation>서로 다른 형식의 원소 %1이(가) 존재합니다.</translation>
1193 </message>
1194 <message>
1195 <source>Particle contains non-deterministic wildcards.</source>
1196 <translation>입자에 비 결정적인 와일드카드가 존재합니다.</translation>
1197 </message>
1198 <message>
1199 <source>Base attribute %1 is required but derived attribute is not.</source>
1200 <translation>기본 속성 %1이(가) 필요하지만 파생 속성은 필요하지 않습니다.</translation>
1201 </message>
1202 <message>
1203 <source>Type of derived attribute %1 cannot be validly derived from type of base attribute.</source>
1204 <translation>파생 속성 %1의 형식이 기본 속성의 형식에서 올바르게 파생될 수 없습니다.</translation>
1205 </message>
1206 <message>
1207 <source>Value constraint of derived attribute %1 does not match value constraint of base attribute.</source>
1208 <translation>파생 속성 %1의 값 제약이 기본 속성의 값 제약과 일치하지 않습니다.</translation>
1209 </message>
1210 <message>
1211 <source>Derived attribute %1 does not exist in the base definition.</source>
1212 <translation>파생 속성 %1이(가) 기본 정의에 없습니다.</translation>
1213 </message>
1214 <message>
1215 <source>Derived attribute %1 does not match the wildcard in the base definition.</source>
1216 <translation>파생 속성 %1이(가) 기본 속성의 와일드카드와 일치하지 않습니다.</translation>
1217 </message>
1218 <message>
1219 <source>Base attribute %1 is required but missing in derived definition.</source>
1220 <translation>기본 속성 %1이(가) 필요하지만 파생 정의에 없습니다.</translation>
1221 </message>
1222 <message>
1223 <source>Derived definition contains an %1 element that does not exists in the base definition</source>
1224 <translation>파생 정의에서 기본 정의에 없는 %1 원소를 포함합니다</translation>
1225 </message>
1226 <message>
1227 <source>Derived wildcard is not a subset of the base wildcard.</source>
1228 <translation>파생 와일드카드가 기본 와일드카드의 부분 집합이 아닙니다.</translation>
1229 </message>
1230 <message>
1231 <source>%1 of derived wildcard is not a valid restriction of %2 of base wildcard</source>
1232 <translation>파생 와일드카드의 %1은(는) 기본 와일드카드의 %2의 올바른 제약 조건이 아닙니다</translation>
1233 </message>
1234 <message>
1235 <source>Attribute %1 from base type is missing in derived type.</source>
1236 <translation>기본 형식의 속성 %1이(가) 파생 형식에 없습니다.</translation>
1237 </message>
1238 <message>
1239 <source>Type of derived attribute %1 differs from type of base attribute.</source>
1240 <translation>파생 속성 %1의 형식이 기본 속성과 다릅니다.</translation>
1241 </message>
1242 <message>
1243 <source>Base definition contains an %1 element that is missing in the derived definition</source>
1244 <translation>파생 정의에 없는 %1 원소가 기본 정의에 포함되어 있습니다</translation>
1245 </message>
1246 <message>
1247 <source>Can not process unknown element %1, expected elements are: %2.</source>
1248 <translation>알 수 없는 원소 %1을(를) 처리할 수 없습니다. 예상하는 원소는 다음과 같습니다: %2.</translation>
1249 </message>
1250 <message>
1251 <source>Element %1 is not allowed in this scope, possible elements are: %2.</source>
1252 <translation>원소 %1은(는) 이 범위에 올 수 없습니다. 가능한 원소는 다음과 같습니다: %2.</translation>
1253 </message>
1254 <message>
1255 <source>Child element is missing in that scope, possible child elements are: %1.</source>
1256 <translation>그 범위에 자식 원소가 없습니다. 가능한 자식 원소는 다음과 같습니다: %1.</translation>
1257 </message>
1258 <message>
1259 <source>Document is not a XML schema.</source>
1260 <translation>문서가 XML 스키마가 아닙니다.</translation>
1261 </message>
1262 <message>
1263 <source>%1 attribute of %2 element contains invalid content: {%3} is not a value of type %4.</source>
1264 <translation>%2 원소의 %1 속성에 올바르지 않은 내용이 있음: {%3}은(는) %4 형식의 값이 아님.</translation>
1265 </message>
1266 <message>
1267 <source>%1 attribute of %2 element contains invalid content: {%3}.</source>
1268 <translation>%2 원소의 %1 속성에 올바르지 않은 내용이 있음: {%3}.</translation>
1269 </message>
1270 <message>
1271 <source>Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema.</source>
1272 <translation>포함된 스키마의 대상 네임스페이스 %1은(는) 포함하는 스키마에 정의된 대상 네임스페이스 %2와(과) 다릅니다.</translation>
1273 </message>
1274 <message>
1275 <source>Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema.</source>
1276 <translation>가져온 스키마의 대상 네임스페이스 %1은(는) 가져온 스키마에 정의된 대상 네임스페이스 %2와(과) 다릅니다.</translation>
1277 </message>
1278 <message>
1279 <source>%1 element is not allowed to have the same %2 attribute value as the target namespace %3.</source>
1280 <translation>원소 %1의 속성 %2의 값으로는 대상 네임스페이스 %3와(과) 같은 값이 올 수 없습니다.</translation>
1281 </message>
1282 <message>
1283 <source>%1 element without %2 attribute is not allowed inside schema without target namespace.</source>
1284 <translation>대상 네임스페이스가 없는 스키마에는 %2 속성이 없는 %1 원소가 올 수 없습니다.</translation>
1285 </message>
1286 <message>
1287 <source>%1 element is not allowed inside %2 element if %3 attribute is present.</source>
1288 <translation>%3 속성이 존재하면 %2 원소 안에 %1 원소가 올 수 없습니다.</translation>
1289 </message>
1290 <message>
1291 <source>%1 element has neither %2 attribute nor %3 child element.</source>
1292 <translation>%1 원소에 %2 속성이나 %3 자식 원소가 없습니다.</translation>
1293 </message>
1294 <message>
1295 <source>%1 element with %2 child element must not have a %3 attribute.</source>
1296 <translation>%2 자식 원소가 있는 %1 원소에는 %3 속성이 존재할 수 없습니다.</translation>
1297 </message>
1298 <message>
1299 <source>%1 attribute of %2 element must be %3 or %4.</source>
1300 <translation>%2 원소의 %1 속성은 %3(이)나 %4여야 합니다.</translation>
1301 </message>
1302 <message>
1303 <source>%1 attribute of %2 element must have a value of %3.</source>
1304 <translation>%2 원소의 %1 속성은 %3 형식의 값을 가져야 합니다.</translation>
1305 </message>
1306 <message>
1307 <source>%1 attribute of %2 element must have a value of %3 or %4.</source>
1308 <translation>%2 원소의 %1 속성은 값 %3(이)나 %4이(가) 있어야 합니다.</translation>
1309 </message>
1310 <message>
1311 <source>%1 element must not have %2 and %3 attribute together.</source>
1312 <translation>%1 원소는 %2, %3 속성 둘 다를 가질 수 없습니다.</translation>
1313 </message>
1314 <message>
1315 <source>Content of %1 attribute of %2 element must not be from namespace %3.</source>
1316 <translation>%2 원소의 %1 속성의 내용은 %3 네임스페이스에서 올 수 없습니다.</translation>
1317 </message>
1318 <message>
1319 <source>%1 attribute of %2 element must not be %3.</source>
1320 <translation>%2 원소의 %1 속성은 %3일 수 없습니다.</translation>
1321 </message>
1322 <message>
1323 <source>%1 attribute of %2 element must have the value %3 because the %4 attribute is set.</source>
1324 <translation>%4 속성이 설정되어 있으므로 %2 원소의 %1 속성 값으로는 %3이(가) 지정되어야 합니다.</translation>
1325 </message>
1326 <message>
1327 <source>Specifying use=&apos;prohibited&apos; inside an attribute group has no effect.</source>
1328 <translation>속성 그룹 안에서 use=&apos;prohibited&apos;를 사용하여도 효과가 없습니다.</translation>
1329 </message>
1330 <message>
1331 <source>%1 element must have either %2 or %3 attribute.</source>
1332 <translation>%1 원소는 %2, %3 중 하나의 속성만 가져야 합니다.</translation>
1333 </message>
1334 <message>
1335 <source>%1 element must have either %2 attribute or %3 or %4 as child element.</source>
1336 <translation>%1 원소는 %2 속성이나 자식 원소로 %3, %4을(를) 가져야 합니다.</translation>
1337 </message>
1338 <message>
1339 <source>%1 element requires either %2 or %3 attribute.</source>
1340 <translation>%1 원소에는 %2, %3 중 하나의 속성이 필요합니다.</translation>
1341 </message>
1342 <message>
1343 <source>Text or entity references not allowed inside %1 element</source>
1344 <translation>%1 원소 안에 텍스트나 엔티티 참조를 사용할 수 없음</translation>
1345 </message>
1346 <message>
1347 <source>%1 attribute of %2 element must contain %3, %4 or a list of URIs.</source>
1348 <translation>%2 원소의 %1 속성에는 %3, %4, 또는 URI 목록이 포함되어야 합니다.</translation>
1349 </message>
1350 <message>
1351 <source>%1 element is not allowed in this context.</source>
1352 <translation>이 콘텍스트에는 %1 원소가 허용되지 않습니다.</translation>
1353 </message>
1354 <message>
1355 <source>%1 attribute of %2 element has larger value than %3 attribute.</source>
1356 <translation>%2 원소의 %1 속성이 %3 속성보다 큰 값을 가지고 있습니다.</translation>
1357 </message>
1358 <message>
1359 <source>Prefix of qualified name %1 is not defined.</source>
1360 <translation>접두사나 완전한 이름 %1이(가) 정의되지 않았습니다.</translation>
1361 </message>
1362 <message>
1363 <source>%1 attribute of %2 element must either contain %3 or the other values.</source>
1364 <translation>%2 원소의 %1 속성에는 %3(이)나 다른 값이 포함되어야 합니다.</translation>
1365 </message>
1366 <message>
1367 <source>Component with ID %1 has been defined previously.</source>
1368 <translation>ID가 %1인 구성 요소가 이미 정의되었습니다.</translation>
1369 </message>
1370 <message>
1371 <source>Element %1 already defined.</source>
1372 <translation>원소 %1이(가) 이미 정의되었습니다.</translation>
1373 </message>
1374 <message>
1375 <source>Attribute %1 already defined.</source>
1376 <translation>속성 %1이(가) 이미 정의되었습니다.</translation>
1377 </message>
1378 <message>
1379 <source>Type %1 already defined.</source>
1380 <translation>형식 %1이(가) 이미 정의되었습니다.</translation>
1381 </message>
1382 <message>
1383 <source>Attribute group %1 already defined.</source>
1384 <translation>속성 그룹 %1이(가) 이미 정의되었습니다.</translation>
1385 </message>
1386 <message>
1387 <source>Element group %1 already defined.</source>
1388 <translation>원소 그룹 %1이(가) 이미 정의되었습니다.</translation>
1389 </message>
1390 <message>
1391 <source>Notation %1 already defined.</source>
1392 <translation>표기법 %1이(가) 이미 정의되었습니다.</translation>
1393 </message>
1394 <message>
1395 <source>Identity constraint %1 already defined.</source>
1396 <translation>아이덴티티 제약 조건 %1이(가) 이미 정의되었습니다.</translation>
1397 </message>
1398 <message>
1399 <source>Duplicated facets in simple type %1.</source>
1400 <translation>간단한 형식 %1에 중복된 패싯이 있습니다.</translation>
1401 </message>
1402 <message>
1403 <source>%1 references unknown %2 or %3 element %4.</source>
1404 <translation>%1에서 알 수 없는 %2 또는 %3 원소 %4을(를) 참조합니다.</translation>
1405 </message>
1406 <message>
1407 <source>%1 references identity constraint %2 that is no %3 or %4 element.</source>
1408 <translation>%1에서 %3, %4 원소가 없는 아이덴티티 제약 조건 %2을(를) 참조합니다.</translation>
1409 </message>
1410 <message>
1411 <source>%1 has a different number of fields from the identity constraint %2 that it references.</source>
1412 <translation>%1에서 참조하는 아이덴티티 제약 조건 %2와(과) 필드 개수가 다릅니다.</translation>
1413 </message>
1414 <message>
1415 <source>Base type %1 of %2 element cannot be resolved.</source>
1416 <translation>%2 원소의 기본 형식 %1을(를) 해석할 수 없습니다.</translation>
1417 </message>
1418 <message>
1419 <source>Item type %1 of %2 element cannot be resolved.</source>
1420 <translation>%2 원소의 항목 형식 %1을(를) 해석할 수 없습니다.</translation>
1421 </message>
1422 <message>
1423 <source>Member type %1 of %2 element cannot be resolved.</source>
1424 <translation>%2 원소의 구성 요소 형식 %1을(를) 해석할 수 없습니다.</translation>
1425 </message>
1426 <message>
1427 <source>Type %1 of %2 element cannot be resolved.</source>
1428 <translation>%2 원소의 형식 %1을(를) 해석할 수 없습니다.</translation>
1429 </message>
1430 <message>
1431 <source>Base type %1 of complex type cannot be resolved.</source>
1432 <translation>복합 형식 %1의 기본 형식을 해석할 수 없습니다.</translation>
1433 </message>
1434 <message>
1435 <source>%1 cannot have complex base type that has a %2.</source>
1436 <translation>%1에는 %2을(를) 포함하는 복합 기본 형식을 추가할 수 없음.</translation>
1437 </message>
1438 <message>
1439 <source>Content model of complex type %1 contains %2 element so it cannot be derived by extension from a non-empty type.</source>
1440 <translation>복합 형식 %1의 내용 모델은 %2 원소를 포함하므로 비어 있지 않은 형식의 확장으로 파생될 수 없습니다.</translation>
1441 </message>
1442 <message>
1443 <source>Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model.</source>
1444 <translation>복합 형식 %1은(는) %2의 내용 모델에 %3 원소를 포함하므로 여기에서 확장으로 파생될 수 없습니다.</translation>
1445 </message>
1446 <message>
1447 <source>Type of %1 element must be a simple type, %2 is not.</source>
1448 <translation>%1 원소의 형식은 간단한 형식이어야 하며, %2은(는) 그렇지 않습니다.</translation>
1449 </message>
1450 <message>
1451 <source>Substitution group %1 of %2 element cannot be resolved.</source>
1452 <translation>%2의 대체 그룹 %1을(를) 해석할 수 없습니다.</translation>
1453 </message>
1454 <message>
1455 <source>Substitution group %1 has circular definition.</source>
1456 <translation>대체 그룹 %1에 순환 정의가 있습니다.</translation>
1457 </message>
1458 <message>
1459 <source>Duplicated element names %1 in %2 element.</source>
1460 <translation>%2 원소에 중복된 원소 이름 %1이(가) 있습니다.</translation>
1461 </message>
1462 <message>
1463 <source>Reference %1 of %2 element cannot be resolved.</source>
1464 <translation>%2 원소의 참조 %1을(를) 해석할 수 없습니다.</translation>
1465 </message>
1466 <message>
1467 <source>Circular group reference for %1.</source>
1468 <translation>%1의 순환 그룹 참조가 발견되었습니다.</translation>
1469 </message>
1470 <message>
1471 <source>%1 element is not allowed in this scope</source>
1472 <translation>이 범위에 %1 원소가 올 수 없습니다</translation>
1473 </message>
1474 <message>
1475 <source>%1 element cannot have %2 attribute with value other than %3.</source>
1476 <translation>%1 원소의 %2 속성 값은 %3이어야 합니다.</translation>
1477 </message>
1478 <message>
1479 <source>%1 element cannot have %2 attribute with value other than %3 or %4.</source>
1480 <translation>%1 원소의 %2 속성 값은 %3(이)나 %4여야 합니다.</translation>
1481 </message>
1482 <message>
1483 <source>%1 or %2 attribute of reference %3 does not match with the attribute declaration %4.</source>
1484 <translation>참조 %3의 속성 %1이나 %2이(가) 속성 선언 %4와(과) 일치하지 않습니다.</translation>
1485 </message>
1486 <message>
1487 <source>Attribute group %1 has circular reference.</source>
1488 <translation>속성 그룹 %1에 순환 참조가 있습니다.</translation>
1489 </message>
1490 <message>
1491 <source>%1 attribute in %2 must have %3 use like in base type %4.</source>
1492 <translation>%2의 %1 속성은 기본 형식 %4처럼 %3을(를) 사용하여야 합니다.</translation>
1493 </message>
1494 <message>
1495 <source>Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2.</source>
1496 <translation>%1의 속성 와일드카드는 기본 형식 %2의 속성 와일드카드의 올바른 제한이 아닙니다.</translation>
1497 </message>
1498 <message>
1499 <source>%1 has attribute wildcard but its base type %2 has not.</source>
1500 <translation>%1에는 속성 와일드카드가 있지만 기본 형식 %2에는 없습니다.</translation>
1501 </message>
1502 <message>
1503 <source>Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible.</source>
1504 <translation>%1 형식의 속성 와일드카드와 기본 형식 %2의 속성 와일드카드의 공용체는 표현할 수 없습니다.</translation>
1505 </message>
1506 <message>
1507 <source>Enumeration facet contains invalid content: {%1} is not a value of type %2.</source>
1508 <translation>Enumeration 패싯에 올바르지 않은 내용이 있습니다: {%1}은(는) %2 형식의 값이 아닙니다.</translation>
1509 </message>
1510 <message>
1511 <source>Namespace prefix of qualified name %1 is not defined.</source>
1512 <translation>완전한 이름 %1을(를) 사용하는 네임스페이스 접두사가 선언되지 않았습니다.</translation>
1513 </message>
1514 <message>
1515 <source>%1 element %2 is not a valid restriction of the %3 element it redefines: %4.</source>
1516 <translation>%1 원소 %2은(는) 재정의하는 %3 원소의 올바른 제약 조건이 아닙니다: %4.</translation>
1517 </message>
1518 <message>
1519 <source>%1 is not valid according to %2.</source>
1520 <translation>%2에 의하면 %1은(는) 올바르지 않습니다.</translation>
1521 </message>
1522 <message>
1523 <source>String content does not match the length facet.</source>
1524 <translation>문자열 내용이 length 패싯과 일치하지 않습니다.</translation>
1525 </message>
1526 <message>
1527 <source>String content does not match the minLength facet.</source>
1528 <translation>문자열 내용이 minLength 패싯과 일치하지 않습니다.</translation>
1529 </message>
1530 <message>
1531 <source>String content does not match the maxLength facet.</source>
1532 <translation>문자열 내용이 maxLength 패싯과 일치하지 않습니다.</translation>
1533 </message>
1534 <message>
1535 <source>String content does not match pattern facet.</source>
1536 <translation>문자열 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1537 </message>
1538 <message>
1539 <source>String content is not listed in the enumeration facet.</source>
1540 <translation>문자열 내용이 enumeration 패싯과 일치하지 않습니다.</translation>
1541 </message>
1542 <message>
1543 <source>Signed integer content does not match the maxInclusive facet.</source>
1544 <translation>부호 있는 정수 내용이 maxInclusive 패싯과 일치하지 않습니다.</translation>
1545 </message>
1546 <message>
1547 <source>Signed integer content does not match the maxExclusive facet.</source>
1548 <translation>부호 있는 정수 내용이 maxExclusive 패싯과 일치하지 않습니다.</translation>
1549 </message>
1550 <message>
1551 <source>Signed integer content does not match the minInclusive facet.</source>
1552 <translation>부호 있는 정수 내용이 minInclusive 패싯과 일치하지 않습니다.</translation>
1553 </message>
1554 <message>
1555 <source>Signed integer content does not match the minExclusive facet.</source>
1556 <translation>부호 있는 정수 내용이 minExclusive 패싯과 일치하지 않습니다.</translation>
1557 </message>
1558 <message>
1559 <source>Signed integer content is not listed in the enumeration facet.</source>
1560 <translation>부호 있는 정수 내용이 enumeration 패싯에 없습니다.</translation>
1561 </message>
1562 <message>
1563 <source>Signed integer content does not match pattern facet.</source>
1564 <translation>부호 있는 정수 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1565 </message>
1566 <message>
1567 <source>Signed integer content does not match in the totalDigits facet.</source>
1568 <translation>부호 있는 정수 내용이 totalDigits 패싯과 일치하지 않습니다.</translation>
1569 </message>
1570 <message>
1571 <source>Unsigned integer content does not match the maxInclusive facet.</source>
1572 <translation>부호 없는 정수 내용이 maxInclusive 패싯과 일치하지 않습니다.</translation>
1573 </message>
1574 <message>
1575 <source>Unsigned integer content does not match the maxExclusive facet.</source>
1576 <translation>부호 없는 정수 내용이 maxExclusive 패싯과 일치하지 않습니다.</translation>
1577 </message>
1578 <message>
1579 <source>Unsigned integer content does not match the minInclusive facet.</source>
1580 <translation>부호 없는 정수 내용이 minInclusive 패싯과 일치하지 않습니다.</translation>
1581 </message>
1582 <message>
1583 <source>Unsigned integer content does not match the minExclusive facet.</source>
1584 <translation>부호 없는 정수 내용이 minExclusive 패싯과 일치하지 않습니다.</translation>
1585 </message>
1586 <message>
1587 <source>Unsigned integer content is not listed in the enumeration facet.</source>
1588 <translation>부호 없는 정수 내용이 enumeration 패싯에 없습니다.</translation>
1589 </message>
1590 <message>
1591 <source>Unsigned integer content does not match pattern facet.</source>
1592 <translation>부호 없는 정수 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1593 </message>
1594 <message>
1595 <source>Unsigned integer content does not match in the totalDigits facet.</source>
1596 <translation>부호 없는 정수 내용이 totalDigits 패싯과 일치하지 않습니다.</translation>
1597 </message>
1598 <message>
1599 <source>Double content does not match the maxInclusive facet.</source>
1600 <translation>실수 내용이 maxLength 패싯과 일치하지 않습니다.</translation>
1601 </message>
1602 <message>
1603 <source>Double content does not match the maxExclusive facet.</source>
1604 <translation>실수 내용이 maxExclusive 패싯과 일치하지 않습니다.</translation>
1605 </message>
1606 <message>
1607 <source>Double content does not match the minInclusive facet.</source>
1608 <translation>실수 내용이 minInclusive 패싯과 일치하지 않습니다.</translation>
1609 </message>
1610 <message>
1611 <source>Double content does not match the minExclusive facet.</source>
1612 <translation>실수 내용이 minExclusive 패싯과 일치하지 않습니다.</translation>
1613 </message>
1614 <message>
1615 <source>Double content is not listed in the enumeration facet.</source>
1616 <translation>실수 내용이 enumeration 패싯과 일치하지 않습니다.</translation>
1617 </message>
1618 <message>
1619 <source>Double content does not match pattern facet.</source>
1620 <translation>실수 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1621 </message>
1622 <message>
1623 <source>Decimal content does not match in the fractionDigits facet.</source>
1624 <translation>십진수 내용이 fractionDigits 패싯과 일치하지 않습니다.</translation>
1625 </message>
1626 <message>
1627 <source>Decimal content does not match in the totalDigits facet.</source>
1628 <translation>십진수 내용이 totalDigits 패싯과 일치하지 않습니다.</translation>
1629 </message>
1630 <message>
1631 <source>Date time content does not match the maxInclusive facet.</source>
1632 <translation>날짜 및 시간 내용이 maxInclusive 패싯과 일치하지 않습니다.</translation>
1633 </message>
1634 <message>
1635 <source>Date time content does not match the maxExclusive facet.</source>
1636 <translation>날짜 및 시간 내용이 maxExclusive 패싯과 일치하지 않습니다.</translation>
1637 </message>
1638 <message>
1639 <source>Date time content does not match the minInclusive facet.</source>
1640 <translation>날짜 및 시간 내용이 minInclusive 패싯과 일치하지 않습니다.</translation>
1641 </message>
1642 <message>
1643 <source>Date time content does not match the minExclusive facet.</source>
1644 <translation>날짜 및 시간 내용이 minExclusive 패싯과 일치하지 않습니다.</translation>
1645 </message>
1646 <message>
1647 <source>Date time content is not listed in the enumeration facet.</source>
1648 <translation>날짜 및 시간 내용이 enumeration 패싯에 없습니다.</translation>
1649 </message>
1650 <message>
1651 <source>Date time content does not match pattern facet.</source>
1652 <translation>날짜 및 시간 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1653 </message>
1654 <message>
1655 <source>Duration content does not match the maxInclusive facet.</source>
1656 <translation>지속 시간 내용이 maxInclusive 패싯과 일치하지 않습니다.</translation>
1657 </message>
1658 <message>
1659 <source>Duration content does not match the maxExclusive facet.</source>
1660 <translation>지속 시간 내용이 maxExclusive 패싯과 일치하지 않습니다.</translation>
1661 </message>
1662 <message>
1663 <source>Duration content does not match the minInclusive facet.</source>
1664 <translation>지속 시간 내용이 minInclusive 패싯과 일치하지 않습니다.</translation>
1665 </message>
1666 <message>
1667 <source>Duration content does not match the minExclusive facet.</source>
1668 <translation>지속 시간 내용이 minExclusive 패싯과 일치하지 않습니다.</translation>
1669 </message>
1670 <message>
1671 <source>Duration content is not listed in the enumeration facet.</source>
1672 <translation>지속 시간 내용이 enumeration 패싯에 없습니다.</translation>
1673 </message>
1674 <message>
1675 <source>Duration content does not match pattern facet.</source>
1676 <translation>지속 시간 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1677 </message>
1678 <message>
1679 <source>Boolean content does not match pattern facet.</source>
1680 <translation>참/거짓 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1681 </message>
1682 <message>
1683 <source>Binary content does not match the length facet.</source>
1684 <translation>참/거짓 내용이 length 패싯과 일치하지 않습니다.</translation>
1685 </message>
1686 <message>
1687 <source>Binary content does not match the minLength facet.</source>
1688 <translation>참/거짓 내용이 minLength 패싯과 일치하지 않습니다.</translation>
1689 </message>
1690 <message>
1691 <source>Binary content does not match the maxLength facet.</source>
1692 <translation>참/거짓 내용이 maxLength 패싯과 일치하지 않습니다.</translation>
1693 </message>
1694 <message>
1695 <source>Binary content is not listed in the enumeration facet.</source>
1696 <translation>참/거짓 내용이 enumeration 패싯에 없습니다.</translation>
1697 </message>
1698 <message>
1699 <source>Invalid QName content: %1.</source>
1700 <translation>잘못된 QName 내용: %1.</translation>
1701 </message>
1702 <message>
1703 <source>QName content is not listed in the enumeration facet.</source>
1704 <translation>QName 내용이 enumeration 패싯에 없습니다.</translation>
1705 </message>
1706 <message>
1707 <source>QName content does not match pattern facet.</source>
1708 <translation>QName 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1709 </message>
1710 <message>
1711 <source>Notation content is not listed in the enumeration facet.</source>
1712 <translation>Notation 내용이 enumeration 패싯에 없습니다.</translation>
1713 </message>
1714 <message>
1715 <source>List content does not match length facet.</source>
1716 <translation>목록 내용이 length 패싯과 일치하지 않습니다.</translation>
1717 </message>
1718 <message>
1719 <source>List content does not match minLength facet.</source>
1720 <translation>목록 내용이 minLength 패싯과 일치하지 않습니다.</translation>
1721 </message>
1722 <message>
1723 <source>List content does not match maxLength facet.</source>
1724 <translation>목록 내용이 maxLength 패싯과 일치하지 않습니다.</translation>
1725 </message>
1726 <message>
1727 <source>List content is not listed in the enumeration facet.</source>
1728 <translation>목록 내용이 enumeration 패싯에 없습니다.</translation>
1729 </message>
1730 <message>
1731 <source>List content does not match pattern facet.</source>
1732 <translation>목록 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1733 </message>
1734 <message>
1735 <source>Union content is not listed in the enumeration facet.</source>
1736 <translation>공용체 내용이 enumeration 패싯에 없습니다.</translation>
1737 </message>
1738 <message>
1739 <source>Union content does not match pattern facet.</source>
1740 <translation>공용체 내용이 pattern 패싯과 일치하지 않습니다.</translation>
1741 </message>
1742 <message>
1743 <source>Data of type %1 are not allowed to be empty.</source>
1744 <translation>%1 형식 데이터는 비어 있으면 안 됩니다.</translation>
1745 </message>
1746 <message>
1747 <source>Element %1 is missing child element.</source>
1748 <translation>원소 %1에 자식 원소가 없습니다.</translation>
1749 </message>
1750 <message>
1751 <source>There is one IDREF value with no corresponding ID: %1.</source>
1752 <translation>대응하는 ID가 없는 IDREF 값이 있습니다: %1.</translation>
1753 </message>
1754 <message>
1755 <source>Loaded schema file is invalid.</source>
1756 <translation>불러온 스키마 파일이 올바르지 않습니다.</translation>
1757 </message>
1758 <message>
1759 <source>%1 contains invalid data.</source>
1760 <translation>%1에 올바르지 않은 데이터가 있습니다.</translation>
1761 </message>
1762 <message>
1763 <source>xsi:schemaLocation namespace %1 has already appeared earlier in the instance document.</source>
1764 <translation>xsi:schemaLocation 네임스페이스 %1이(가) 인스턴스 문서의 더 위에 존재합니다.</translation>
1765 </message>
1766 <message>
1767 <source>xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute.</source>
1768 <translation>xsi:noNamespaceSchemaLocation은 첫 no-namespace 원소나 속성 다음에 나올 수 없습니다.</translation>
1769 </message>
1770 <message>
1771 <source>No schema defined for validation.</source>
1772 <translation>검증할 스키마가 정의되지 않았습니다.</translation>
1773 </message>
1774 <message>
1775 <source>No definition for element %1 available.</source>
1776 <translation>원소 %1의 정의를 사용할 수 없습니다.</translation>
1777 </message>
1778 <message>
1779 <source>Specified type %1 is not known to the schema.</source>
1780 <translation>스키마에 지정한 형식 %1이(가) 정의되어 있지 않습니다.</translation>
1781 </message>
1782 <message>
1783 <source>Element %1 is not defined in this scope.</source>
1784 <translation>원소 %1은(는) 이 범위에 정의되지 않았습니다.</translation>
1785 </message>
1786 <message>
1787 <source>Declaration for element %1 does not exist.</source>
1788 <translation>원소 %1의 선언이 존재하지 않습니다.</translation>
1789 </message>
1790 <message>
1791 <source>Element %1 contains invalid content.</source>
1792 <translation>원소 %1에 올바르지 않은 내용이 있습니다.</translation>
1793 </message>
1794 <message>
1795 <source>Element %1 is declared as abstract.</source>
1796 <translation>원소 %1이 추상 원소로 선언되었습니다.</translation>
1797 </message>
1798 <message>
1799 <source>Element %1 is not nillable.</source>
1800 <translation>원소 %1에 nil 값을 대입할 수 없습니다.</translation>
1801 </message>
1802 <message>
1803 <source>Attribute %1 contains invalid data: %2</source>
1804 <translation>속성 %1에 잘못된 데이터가 있음: %2</translation>
1805 </message>
1806 <message>
1807 <source>Element contains content although it is nillable.</source>
1808 <translation>원소에 nil 값을 할당할 수 있지만 내용이 들어 있습니다.</translation>
1809 </message>
1810 <message>
1811 <source>Fixed value constraint not allowed if element is nillable.</source>
1812 <translation>원소에 nil 값을 대입할 수 있으면 고정된 값 제약 조건을 사용할 수 없습니다.</translation>
1813 </message>
1814 <message>
1815 <source>Specified type %1 is not validly substitutable with element type %2.</source>
1816 <translation>지정한 형식 %1은(는) %2 형식의 원소로 올바르게 대체할 수 없습니다.</translation>
1817 </message>
1818 <message>
1819 <source>Complex type %1 is not allowed to be abstract.</source>
1820 <translation>복합 형식 %1은(는) 추상으로 선언할 수 없습니다.</translation>
1821 </message>
1822 <message>
1823 <source>Element %1 contains not allowed attributes.</source>
1824 <translation>원소 %1에 허용되지 않은 속성이 포함되어 있습니다.</translation>
1825 </message>
1826 <message>
1827 <source>Element %1 contains not allowed child element.</source>
1828 <translation>원소 %1에 허용되지 않은 자식 원소가 포함되어 있습니다.</translation>
1829 </message>
1830 <message>
1831 <source>Content of element %1 does not match its type definition: %2.</source>
1832 <translation>원소 %1의 내용은 형식 선언과 일치하지 않습니다: %2.</translation>
1833 </message>
1834 <message>
1835 <source>Content of element %1 does not match defined value constraint.</source>
1836 <translation>원소 %1의 내용은 정의된 값 제약 조건과 일치하지 않습니다.</translation>
1837 </message>
1838 <message>
1839 <source>Element %1 contains not allowed child content.</source>
1840 <translation>원소 %1에 허용되지 않은 자식 내용이 포함되어 있습니다.</translation>
1841 </message>
1842 <message>
1843 <source>Element %1 contains not allowed text content.</source>
1844 <translation>원소 %1에 허용되지 않은 텍스트 내용이 포함되어 있습니다.</translation>
1845 </message>
1846 <message>
1847 <source>Element %1 cannot contain other elements, as it has a fixed content.</source>
1848 <translation>원소 %1의 내용은 고정되어 있으므로 다른 원소를 포함할 수 없습니다.</translation>
1849 </message>
1850 <message>
1851 <source>Element %1 is missing required attribute %2.</source>
1852 <translation>원소 %1에 필요한 속성 %2이(가) 없습니다.</translation>
1853 </message>
1854 <message>
1855 <source>Attribute %1 does not match the attribute wildcard.</source>
1856 <translation>속성 %1이(가) 속성 와일드카드와 일치하지 않습니다.</translation>
1857 </message>
1858 <message>
1859 <source>Declaration for attribute %1 does not exist.</source>
1860 <translation>속성 %1 선언이 존재하지 않습니다.</translation>
1861 </message>
1862 <message>
1863 <source>Element %1 contains two attributes of type %2.</source>
1864 <translation>원소 %1은(는) 형식이 %2인 속성을 두 개 포함하고 있습니다.</translation>
1865 </message>
1866 <message>
1867 <source>Attribute %1 contains invalid content.</source>
1868 <translation>속성 %1에 잘못된 데이터가 있습니다.</translation>
1869 </message>
1870 <message>
1871 <source>Element %1 contains unknown attribute %2.</source>
1872 <translation>원소 %1에 알 수 없는 속성 %2이(가) 포함되어 있습니다.</translation>
1873 </message>
1874 <message>
1875 <source>Content of attribute %1 does not match its type definition: %2.</source>
1876 <translation>속성 %1의 내용과 형식 정의가 일치하지 않습니다: %2.</translation>
1877 </message>
1878 <message>
1879 <source>Content of attribute %1 does not match defined value constraint.</source>
1880 <translation>속성 %1의 내용이 정의된 값 제약 조건과 일치하지 않습니다.</translation>
1881 </message>
1882 <message>
1883 <source>Non-unique value found for constraint %1.</source>
1884 <translation>제약 조건 %1에 중복되는 값이 있습니다.</translation>
1885 </message>
1886 <message>
1887 <source>Key constraint %1 contains absent fields.</source>
1888 <translation>키 제약 조건 %1에 비어 있는 필드가 있습니다.</translation>
1889 </message>
1890 <message>
1891 <source>Key constraint %1 contains references nillable element %2.</source>
1892 <translation>키 제약 조건 %1에서 nil 값이 올 수 있는 원소 %2을(를) 참조합니다.</translation>
1893 </message>
1894 <message>
1895 <source>No referenced value found for key reference %1.</source>
1896 <translation>키 참조 %1에 대한 참조되는 값을 찾을 수 없습니다.</translation>
1897 </message>
1898 <message>
1899 <source>More than one value found for field %1.</source>
1900 <translation>필드 %1에 하나 이상의 값이 있습니다.</translation>
1901 </message>
1902 <message>
1903 <source>Field %1 has no simple type.</source>
1904 <translation>필드 %1에 간단한 형식이 없습니다.</translation>
1905 </message>
1906 <message>
1907 <source>Field %1 is missing its simple type.</source>
1908 <translation>필드 %1에 간단한 형식이 없습니다.</translation>
1909 </message>
1910 <message>
1911 <source>ID value &apos;%1&apos; is not unique.</source>
1912 <translation>ID 값 &apos;%1&apos;이(가) 유일하지 않습니다.</translation>
1913 </message>
1914 <message>
1915 <source>&apos;%1&apos; attribute contains invalid QName content: %2.</source>
1916 <translation>속성 &apos;%1&apos;에 올바르지 않은 QName 내용이 있음: %2.</translation>
1917 </message>
1918 <message>
1919 <source>empty</source>
1920 <translation>비어 있음</translation>
1921 </message>
1922 <message>
1923 <source>zero or one</source>
1924 <translation>0이나 1</translation>
1925 </message>
1926 <message>
1927 <source>exactly one</source>
1928 <translation>정확히 1</translation>
1929 </message>
1930 <message>
1931 <source>one or more</source>
1932 <translation>1 이상</translation>
1933 </message>
1934 <message>
1935 <source>zero or more</source>
1936 <translation>0 이상</translation>
1937 </message>
1938 <message>
1939 <source>Required type is %1, but %2 was found.</source>
1940 <translation>요청한 형식은 %1(이)나 %2이(가) 요청되었습니다.</translation>
1941 </message>
1942 <message>
1943 <source>Promoting %1 to %2 may cause loss of precision.</source>
1944 <translation>%1을(를) %2(으)로 변환하면 정밀도를 잃어버릴 수 있습니다.</translation>
1945 </message>
1946 <message>
1947 <source>The focus is undefined.</source>
1948 <translation>초점이 정의되지 않았습니다.</translation>
1949 </message>
1950 <message>
1951 <source>It&apos;s not possible to add attributes after any other kind of node.</source>
1952 <translation>노드 뒤에 속성을 추가할 수 없습니다.</translation>
1953 </message>
1954 <message>
1955 <source>An attribute by name %1 has already been created.</source>
1956 <translation>이름이 %1인 속성이 이미 생성되었습니다.</translation>
1957 </message>
1958 <message>
1959 <source>Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.</source>
1960 <translation>유니코드 코드 포인트 순 정렬만 지원합니다(%1). %2은(는) 지원하지 않습니다.</translation>
1961 </message>
1962 </context>
1963 </TS>