| 1 |
/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices |
| 2 |
* |
| 3 |
* Author : Liu Junliang <[email protected]> |
| 4 |
* |
| 5 |
* This file is licensed under the terms of the GNU General Public License |
| 6 |
* version 2. This program is licensed "as is" without any warranty of any |
| 7 |
* kind, whether express or implied. |
| 8 |
*/ |
| 9 |
|
| 10 |
#ifndef _SR9800_H |
| 11 |
#define _SR9800_H |
| 12 |
|
| 13 |
/* SR9800 spec. command table on Linux Platform */ |
| 14 |
|
| 15 |
/* command : Software Station Management Control Reg */ |
| 16 |
#define SR_CMD_SET_SW_MII 0x06 |
| 17 |
/* command : PHY Read Reg */ |
| 18 |
#define SR_CMD_READ_MII_REG 0x07 |
| 19 |
/* command : PHY Write Reg */ |
| 20 |
#define SR_CMD_WRITE_MII_REG 0x08 |
| 21 |
/* command : Hardware Station Management Control Reg */ |
| 22 |
#define SR_CMD_SET_HW_MII 0x0a |
| 23 |
/* command : SROM Read Reg */ |
| 24 |
#define SR_CMD_READ_EEPROM 0x0b |
| 25 |
/* command : SROM Write Reg */ |
| 26 |
#define SR_CMD_WRITE_EEPROM 0x0c |
| 27 |
/* command : SROM Write Enable Reg */ |
| 28 |
#define SR_CMD_WRITE_ENABLE 0x0d |
| 29 |
/* command : SROM Write Disable Reg */ |
| 30 |
#define SR_CMD_WRITE_DISABLE 0x0e |
| 31 |
/* command : RX Control Read Reg */ |
| 32 |
#define SR_CMD_READ_RX_CTL 0x0f |
| 33 |
#define SR_RX_CTL_PRO (1 << 0) |
| 34 |
#define SR_RX_CTL_AMALL (1 << 1) |
| 35 |
#define SR_RX_CTL_SEP (1 << 2) |
| 36 |
#define SR_RX_CTL_AB (1 << 3) |
| 37 |
#define SR_RX_CTL_AM (1 << 4) |
| 38 |
#define SR_RX_CTL_AP (1 << 5) |
| 39 |
#define SR_RX_CTL_ARP (1 << 6) |
| 40 |
#define SR_RX_CTL_SO (1 << 7) |
| 41 |
#define SR_RX_CTL_RH1M (1 << 8) |
| 42 |
#define SR_RX_CTL_RH2M (1 << 9) |
| 43 |
#define SR_RX_CTL_RH3M (1 << 10) |
| 44 |
/* command : RX Control Write Reg */ |
| 45 |
#define SR_CMD_WRITE_RX_CTL 0x10 |
| 46 |
/* command : IPG0/IPG1/IPG2 Control Read Reg */ |
| 47 |
#define SR_CMD_READ_IPG012 0x11 |
| 48 |
/* command : IPG0/IPG1/IPG2 Control Write Reg */ |
| 49 |
#define SR_CMD_WRITE_IPG012 0x12 |
| 50 |
/* command : Node ID Read Reg */ |
| 51 |
#define SR_CMD_READ_NODE_ID 0x13 |
| 52 |
/* command : Node ID Write Reg */ |
| 53 |
#define SR_CMD_WRITE_NODE_ID 0x14 |
| 54 |
/* command : Multicast Filter Array Read Reg */ |
| 55 |
#define SR_CMD_READ_MULTI_FILTER 0x15 |
| 56 |
/* command : Multicast Filter Array Write Reg */ |
| 57 |
#define SR_CMD_WRITE_MULTI_FILTER 0x16 |
| 58 |
/* command : Eth/HomePNA PHY Address Reg */ |
| 59 |
#define SR_CMD_READ_PHY_ID 0x19 |
| 60 |
/* command : Medium Status Read Reg */ |
| 61 |
#define SR_CMD_READ_MEDIUM_STATUS 0x1a |
| 62 |
#define SR_MONITOR_LINK (1 << 1) |
| 63 |
#define SR_MONITOR_MAGIC (1 << 2) |
| 64 |
#define SR_MONITOR_HSFS (1 << 4) |
| 65 |
/* command : Medium Status Write Reg */ |
| 66 |
#define SR_CMD_WRITE_MEDIUM_MODE 0x1b |
| 67 |
#define SR_MEDIUM_GM (1 << 0) |
| 68 |
#define SR_MEDIUM_FD (1 << 1) |
| 69 |
#define SR_MEDIUM_AC (1 << 2) |
| 70 |
#define SR_MEDIUM_ENCK (1 << 3) |
| 71 |
#define SR_MEDIUM_RFC (1 << 4) |
| 72 |
#define SR_MEDIUM_TFC (1 << 5) |
| 73 |
#define SR_MEDIUM_JFE (1 << 6) |
| 74 |
#define SR_MEDIUM_PF (1 << 7) |
| 75 |
#define SR_MEDIUM_RE (1 << 8) |
| 76 |
#define SR_MEDIUM_PS (1 << 9) |
| 77 |
#define SR_MEDIUM_RSV (1 << 10) |
| 78 |
#define SR_MEDIUM_SBP (1 << 11) |
| 79 |
#define SR_MEDIUM_SM (1 << 12) |
| 80 |
/* command : Monitor Mode Status Read Reg */ |
| 81 |
#define SR_CMD_READ_MONITOR_MODE 0x1c |
| 82 |
/* command : Monitor Mode Status Write Reg */ |
| 83 |
#define SR_CMD_WRITE_MONITOR_MODE 0x1d |
| 84 |
/* command : GPIO Status Read Reg */ |
| 85 |
#define SR_CMD_READ_GPIOS 0x1e |
| 86 |
#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */ |
| 87 |
#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */ |
| 88 |
#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */ |
| 89 |
#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */ |
| 90 |
#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */ |
| 91 |
#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */ |
| 92 |
#define SR_GPIO_RESERVED (1 << 6) /* Reserved */ |
| 93 |
#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */ |
| 94 |
/* command : GPIO Status Write Reg */ |
| 95 |
#define SR_CMD_WRITE_GPIOS 0x1f |
| 96 |
/* command : Eth PHY Power and Reset Control Reg */ |
| 97 |
#define SR_CMD_SW_RESET 0x20 |
| 98 |
#define SR_SWRESET_CLEAR 0x00 |
| 99 |
#define SR_SWRESET_RR (1 << 0) |
| 100 |
#define SR_SWRESET_RT (1 << 1) |
| 101 |
#define SR_SWRESET_PRTE (1 << 2) |
| 102 |
#define SR_SWRESET_PRL (1 << 3) |
| 103 |
#define SR_SWRESET_BZ (1 << 4) |
| 104 |
#define SR_SWRESET_IPRL (1 << 5) |
| 105 |
#define SR_SWRESET_IPPD (1 << 6) |
| 106 |
/* command : Software Interface Selection Status Read Reg */ |
| 107 |
#define SR_CMD_SW_PHY_STATUS 0x21 |
| 108 |
/* command : Software Interface Selection Status Write Reg */ |
| 109 |
#define SR_CMD_SW_PHY_SELECT 0x22 |
| 110 |
/* command : BULK in Buffer Size Reg */ |
| 111 |
#define SR_CMD_BULKIN_SIZE 0x2A |
| 112 |
/* command : LED_MUX Control Reg */ |
| 113 |
#define SR_CMD_LED_MUX 0x70 |
| 114 |
#define SR_LED_MUX_TX_ACTIVE (1 << 0) |
| 115 |
#define SR_LED_MUX_RX_ACTIVE (1 << 1) |
| 116 |
#define SR_LED_MUX_COLLISION (1 << 2) |
| 117 |
#define SR_LED_MUX_DUP_COL (1 << 3) |
| 118 |
#define SR_LED_MUX_DUP (1 << 4) |
| 119 |
#define SR_LED_MUX_SPEED (1 << 5) |
| 120 |
#define SR_LED_MUX_LINK_ACTIVE (1 << 6) |
| 121 |
#define SR_LED_MUX_LINK (1 << 7) |
| 122 |
|
| 123 |
/* Register Access Flags */ |
| 124 |
#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) |
| 125 |
#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) |
| 126 |
|
| 127 |
/* Multicast Filter Array size & Max Number */ |
| 128 |
#define SR_MCAST_FILTER_SIZE 8 |
| 129 |
#define SR_MAX_MCAST 64 |
| 130 |
|
| 131 |
/* IPG0/1/2 Default Value */ |
| 132 |
#define SR9800_IPG0_DEFAULT 0x15 |
| 133 |
#define SR9800_IPG1_DEFAULT 0x0c |
| 134 |
#define SR9800_IPG2_DEFAULT 0x12 |
| 135 |
|
| 136 |
/* Medium Status Default Mode */ |
| 137 |
#define SR9800_MEDIUM_DEFAULT \ |
| 138 |
(SR_MEDIUM_FD | SR_MEDIUM_RFC | \ |
| 139 |
SR_MEDIUM_TFC | SR_MEDIUM_PS | \ |
| 140 |
SR_MEDIUM_AC | SR_MEDIUM_RE) |
| 141 |
|
| 142 |
/* RX Control Default Setting */ |
| 143 |
#define SR_DEFAULT_RX_CTL \ |
| 144 |
(SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M) |
| 145 |
|
| 146 |
/* EEPROM Magic Number & EEPROM Size */ |
| 147 |
#define SR_EEPROM_MAGIC 0xdeadbeef |
| 148 |
#define SR9800_EEPROM_LEN 0xff |
| 149 |
|
| 150 |
/* SR9800 Driver Name and Flags */ |
| 151 |
#define DRIVER_NAME "CoreChips" |
| 152 |
#define DRIVER_FLAG \ |
| 153 |
(FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET) |
| 154 |
|
| 155 |
/* SR9800 BULKIN Buffer Size */ |
| 156 |
#define SR9800_MAX_BULKIN_2K 0 |
| 157 |
#define SR9800_MAX_BULKIN_4K 1 |
| 158 |
#define SR9800_MAX_BULKIN_6K 2 |
| 159 |
#define SR9800_MAX_BULKIN_8K 3 |
| 160 |
#define SR9800_MAX_BULKIN_16K 4 |
| 161 |
#define SR9800_MAX_BULKIN_20K 5 |
| 162 |
#define SR9800_MAX_BULKIN_24K 6 |
| 163 |
#define SR9800_MAX_BULKIN_32K 7 |
| 164 |
|
| 165 |
static const struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = { |
| 166 |
/* 2k */ |
| 167 |
{2048, 0x8000, 0x8001}, |
| 168 |
/* 4k */ |
| 169 |
{4096, 0x8100, 0x8147}, |
| 170 |
/* 6k */ |
| 171 |
{6144, 0x8200, 0x81EB}, |
| 172 |
/* 8k */ |
| 173 |
{8192, 0x8300, 0x83D7}, |
| 174 |
/* 16 */ |
| 175 |
{16384, 0x8400, 0x851E}, |
| 176 |
/* 20k */ |
| 177 |
{20480, 0x8500, 0x8666}, |
| 178 |
/* 24k */ |
| 179 |
{24576, 0x8600, 0x87AE}, |
| 180 |
/* 32k */ |
| 181 |
{32768, 0x8700, 0x8A3D}, |
| 182 |
}; |
| 183 |
|
| 184 |
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ |
| 185 |
struct sr_data { |
| 186 |
u8 multi_filter[SR_MCAST_FILTER_SIZE]; |
| 187 |
u8 mac_addr[ETH_ALEN]; |
| 188 |
u8 phymode; |
| 189 |
u8 ledmode; |
| 190 |
u8 eeprom_len; |
| 191 |
}; |
| 192 |
|
| 193 |
struct sr9800_int_data { |
| 194 |
__le16 res1; |
| 195 |
u8 link; |
| 196 |
__le16 res2; |
| 197 |
u8 status; |
| 198 |
__le16 res3; |
| 199 |
} __packed; |
| 200 |
|
| 201 |
#endif /* _SR9800_H */ |