| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Host Side support for RNDIS Networking Links |
| 4 |
* Copyright (C) 2005 by David Brownell |
| 5 |
*/ |
| 6 |
#include <linux/module.h> |
| 7 |
#include <linux/netdevice.h> |
| 8 |
#include <linux/etherdevice.h> |
| 9 |
#include <linux/ethtool.h> |
| 10 |
#include <linux/workqueue.h> |
| 11 |
#include <linux/slab.h> |
| 12 |
#include <linux/mii.h> |
| 13 |
#include <linux/usb.h> |
| 14 |
#include <linux/usb/cdc.h> |
| 15 |
#include <linux/usb/usbnet.h> |
| 16 |
#include <linux/usb/rndis_host.h> |
| 17 |
|
| 18 |
|
| 19 |
/* |
| 20 |
* RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of |
| 21 |
* course ACM was intended for modems, not Ethernet links! USB's standard |
| 22 |
* for Ethernet links is "CDC Ethernet", which is significantly simpler. |
| 23 |
* |
| 24 |
* NOTE that Microsoft's "RNDIS 1.0" specification is incomplete. Issues |
| 25 |
* include: |
| 26 |
* - Power management in particular relies on information that's scattered |
| 27 |
* through other documentation, and which is incomplete or incorrect even |
| 28 |
* there. |
| 29 |
* - There are various undocumented protocol requirements, such as the |
| 30 |
* need to send unused garbage in control-OUT messages. |
| 31 |
* - In some cases, MS-Windows will emit undocumented requests; this |
| 32 |
* matters more to peripheral implementations than host ones. |
| 33 |
* |
| 34 |
* Moreover there's a no-open-specs variant of RNDIS called "ActiveSync". |
| 35 |
* |
| 36 |
* For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in |
| 37 |
* favor of such non-proprietary alternatives as CDC Ethernet or the newer (and |
| 38 |
* currently rare) "Ethernet Emulation Model" (EEM). |
| 39 |
*/ |
| 40 |
|
| 41 |
/* |
| 42 |
* RNDIS notifications from device: command completion; "reverse" |
| 43 |
* keepalives; etc |
| 44 |
*/ |
| 45 |
void rndis_status(struct usbnet *dev, struct urb *urb) |
| 46 |
{ |
| 47 |
netdev_dbg(dev->net, "rndis status urb, len %d stat %d\n", |
| 48 |
urb->actual_length, urb->status); |
| 49 |
// FIXME for keepalives, respond immediately (asynchronously) |
| 50 |
// if not an RNDIS status, do like cdc_status(dev,urb) does |
| 51 |
} |
| 52 |
EXPORT_SYMBOL_GPL(rndis_status); |
| 53 |
|
| 54 |
/* |
| 55 |
* RNDIS indicate messages. |
| 56 |
*/ |
| 57 |
static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg, |
| 58 |
int buflen) |
| 59 |
{ |
| 60 |
struct cdc_state *info = (void *)&dev->data; |
| 61 |
struct device *udev = &info->control->dev; |
| 62 |
|
| 63 |
if (dev->driver_info->indication) { |
| 64 |
dev->driver_info->indication(dev, msg, buflen); |
| 65 |
} else { |
| 66 |
u32 status = le32_to_cpu(msg->status); |
| 67 |
|
| 68 |
switch (status) { |
| 69 |
case RNDIS_STATUS_MEDIA_CONNECT: |
| 70 |
dev_info(udev, "rndis media connect\n"); |
| 71 |
break; |
| 72 |
case RNDIS_STATUS_MEDIA_DISCONNECT: |
| 73 |
dev_info(udev, "rndis media disconnect\n"); |
| 74 |
break; |
| 75 |
default: |
| 76 |
dev_info(udev, "rndis indication: 0x%08x\n", status); |
| 77 |
} |
| 78 |
} |
| 79 |
} |
| 80 |
|
| 81 |
/* |
| 82 |
* RPC done RNDIS-style. Caller guarantees: |
| 83 |
* - message is properly byteswapped |
| 84 |
* - there's no other request pending |
| 85 |
* - buf can hold up to 1KB response (required by RNDIS spec) |
| 86 |
* On return, the first few entries are already byteswapped. |
| 87 |
* |
| 88 |
* Call context is likely probe(), before interface name is known, |
| 89 |
* which is why we won't try to use it in the diagnostics. |
| 90 |
*/ |
| 91 |
int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen) |
| 92 |
{ |
| 93 |
struct cdc_state *info = (void *) &dev->data; |
| 94 |
struct usb_cdc_notification notification; |
| 95 |
int master_ifnum; |
| 96 |
int retval; |
| 97 |
int partial; |
| 98 |
unsigned count; |
| 99 |
u32 xid = 0, msg_len, request_id, msg_type, rsp, |
| 100 |
status; |
| 101 |
|
| 102 |
/* REVISIT when this gets called from contexts other than probe() or |
| 103 |
* disconnect(): either serialize, or dispatch responses on xid |
| 104 |
*/ |
| 105 |
|
| 106 |
msg_type = le32_to_cpu(buf->msg_type); |
| 107 |
|
| 108 |
/* Issue the request; xid is unique, don't bother byteswapping it */ |
| 109 |
if (likely(msg_type != RNDIS_MSG_HALT && msg_type != RNDIS_MSG_RESET)) { |
| 110 |
xid = dev->xid++; |
| 111 |
if (!xid) |
| 112 |
xid = dev->xid++; |
| 113 |
buf->request_id = (__force __le32) xid; |
| 114 |
} |
| 115 |
master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber; |
| 116 |
retval = usb_control_msg(dev->udev, |
| 117 |
usb_sndctrlpipe(dev->udev, 0), |
| 118 |
USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| 119 |
USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 120 |
0, master_ifnum, |
| 121 |
buf, le32_to_cpu(buf->msg_len), |
| 122 |
RNDIS_CONTROL_TIMEOUT_MS); |
| 123 |
if (unlikely(retval < 0 || xid == 0)) |
| 124 |
return retval; |
| 125 |
|
| 126 |
/* Some devices don't respond on the control channel until |
| 127 |
* polled on the status channel, so do that first. */ |
| 128 |
if (dev->driver_info->data & RNDIS_DRIVER_DATA_POLL_STATUS) { |
| 129 |
retval = usb_interrupt_msg( |
| 130 |
dev->udev, |
| 131 |
usb_rcvintpipe(dev->udev, |
| 132 |
dev->status->desc.bEndpointAddress), |
| 133 |
¬ification, sizeof(notification), &partial, |
| 134 |
RNDIS_CONTROL_TIMEOUT_MS); |
| 135 |
if (unlikely(retval < 0)) |
| 136 |
return retval; |
| 137 |
} |
| 138 |
|
| 139 |
/* Poll the control channel; the request probably completed immediately */ |
| 140 |
rsp = le32_to_cpu(buf->msg_type) | RNDIS_MSG_COMPLETION; |
| 141 |
for (count = 0; count < 10; count++) { |
| 142 |
memset(buf, 0, CONTROL_BUFFER_SIZE); |
| 143 |
retval = usb_control_msg(dev->udev, |
| 144 |
usb_rcvctrlpipe(dev->udev, 0), |
| 145 |
USB_CDC_GET_ENCAPSULATED_RESPONSE, |
| 146 |
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 147 |
0, master_ifnum, |
| 148 |
buf, buflen, |
| 149 |
RNDIS_CONTROL_TIMEOUT_MS); |
| 150 |
if (likely(retval >= 8)) { |
| 151 |
msg_type = le32_to_cpu(buf->msg_type); |
| 152 |
msg_len = le32_to_cpu(buf->msg_len); |
| 153 |
status = le32_to_cpu(buf->status); |
| 154 |
request_id = (__force u32) buf->request_id; |
| 155 |
if (likely(msg_type == rsp)) { |
| 156 |
if (likely(request_id == xid)) { |
| 157 |
if (unlikely(rsp == RNDIS_MSG_RESET_C)) |
| 158 |
return 0; |
| 159 |
if (likely(RNDIS_STATUS_SUCCESS == |
| 160 |
status)) |
| 161 |
return 0; |
| 162 |
dev_dbg(&info->control->dev, |
| 163 |
"rndis reply status %08x\n", |
| 164 |
status); |
| 165 |
return -EL3RST; |
| 166 |
} |
| 167 |
dev_dbg(&info->control->dev, |
| 168 |
"rndis reply id %d expected %d\n", |
| 169 |
request_id, xid); |
| 170 |
/* then likely retry */ |
| 171 |
} else switch (msg_type) { |
| 172 |
case RNDIS_MSG_INDICATE: /* fault/event */ |
| 173 |
rndis_msg_indicate(dev, (void *)buf, buflen); |
| 174 |
break; |
| 175 |
case RNDIS_MSG_KEEPALIVE: { /* ping */ |
| 176 |
struct rndis_keepalive_c *msg = (void *)buf; |
| 177 |
|
| 178 |
msg->msg_type = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C); |
| 179 |
msg->msg_len = cpu_to_le32(sizeof *msg); |
| 180 |
msg->status = cpu_to_le32(RNDIS_STATUS_SUCCESS); |
| 181 |
retval = usb_control_msg(dev->udev, |
| 182 |
usb_sndctrlpipe(dev->udev, 0), |
| 183 |
USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| 184 |
USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 185 |
0, master_ifnum, |
| 186 |
msg, sizeof *msg, |
| 187 |
RNDIS_CONTROL_TIMEOUT_MS); |
| 188 |
if (unlikely(retval < 0)) |
| 189 |
dev_dbg(&info->control->dev, |
| 190 |
"rndis keepalive err %d\n", |
| 191 |
retval); |
| 192 |
} |
| 193 |
break; |
| 194 |
default: |
| 195 |
dev_dbg(&info->control->dev, |
| 196 |
"unexpected rndis msg %08x len %d\n", |
| 197 |
le32_to_cpu(buf->msg_type), msg_len); |
| 198 |
} |
| 199 |
} else { |
| 200 |
/* device probably issued a protocol stall; ignore */ |
| 201 |
dev_dbg(&info->control->dev, |
| 202 |
"rndis response error, code %d\n", retval); |
| 203 |
} |
| 204 |
msleep(40); |
| 205 |
} |
| 206 |
dev_dbg(&info->control->dev, "rndis response timeout\n"); |
| 207 |
return -ETIMEDOUT; |
| 208 |
} |
| 209 |
EXPORT_SYMBOL_GPL(rndis_command); |
| 210 |
|
| 211 |
/* |
| 212 |
* rndis_query: |
| 213 |
* |
| 214 |
* Performs a query for @oid along with 0 or more bytes of payload as |
| 215 |
* specified by @in_len. If @reply_len is not set to -1 then the reply |
| 216 |
* length is checked against this value, resulting in an error if it |
| 217 |
* doesn't match. |
| 218 |
* |
| 219 |
* NOTE: Adding a payload exactly or greater than the size of the expected |
| 220 |
* response payload is an evident requirement MSFT added for ActiveSync. |
| 221 |
* |
| 222 |
* The only exception is for OIDs that return a variably sized response, |
| 223 |
* in which case no payload should be added. This undocumented (and |
| 224 |
* nonsensical!) issue was found by sniffing protocol requests from the |
| 225 |
* ActiveSync 4.1 Windows driver. |
| 226 |
*/ |
| 227 |
static int rndis_query(struct usbnet *dev, struct usb_interface *intf, |
| 228 |
void *buf, u32 oid, u32 in_len, |
| 229 |
void **reply, int *reply_len) |
| 230 |
{ |
| 231 |
int retval; |
| 232 |
union { |
| 233 |
void *buf; |
| 234 |
struct rndis_msg_hdr *header; |
| 235 |
struct rndis_query *get; |
| 236 |
struct rndis_query_c *get_c; |
| 237 |
} u; |
| 238 |
u32 off, len; |
| 239 |
|
| 240 |
u.buf = buf; |
| 241 |
|
| 242 |
memset(u.get, 0, sizeof *u.get + in_len); |
| 243 |
u.get->msg_type = cpu_to_le32(RNDIS_MSG_QUERY); |
| 244 |
u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len); |
| 245 |
u.get->oid = cpu_to_le32(oid); |
| 246 |
u.get->len = cpu_to_le32(in_len); |
| 247 |
u.get->offset = cpu_to_le32(20); |
| 248 |
|
| 249 |
retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE); |
| 250 |
if (unlikely(retval < 0)) { |
| 251 |
dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n", |
| 252 |
oid, retval); |
| 253 |
return retval; |
| 254 |
} |
| 255 |
|
| 256 |
off = le32_to_cpu(u.get_c->offset); |
| 257 |
len = le32_to_cpu(u.get_c->len); |
| 258 |
if (unlikely((off > CONTROL_BUFFER_SIZE - 8) || |
| 259 |
(len > CONTROL_BUFFER_SIZE - 8 - off))) |
| 260 |
goto response_error; |
| 261 |
|
| 262 |
if (*reply_len != -1 && len != *reply_len) |
| 263 |
goto response_error; |
| 264 |
|
| 265 |
*reply = (unsigned char *) &u.get_c->request_id + off; |
| 266 |
*reply_len = len; |
| 267 |
|
| 268 |
return retval; |
| 269 |
|
| 270 |
response_error: |
| 271 |
dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) " |
| 272 |
"invalid response - off %d len %d\n", |
| 273 |
oid, off, len); |
| 274 |
return -EDOM; |
| 275 |
} |
| 276 |
|
| 277 |
/* same as usbnet_netdev_ops but MTU change not allowed */ |
| 278 |
static const struct net_device_ops rndis_netdev_ops = { |
| 279 |
.ndo_open = usbnet_open, |
| 280 |
.ndo_stop = usbnet_stop, |
| 281 |
.ndo_start_xmit = usbnet_start_xmit, |
| 282 |
.ndo_tx_timeout = usbnet_tx_timeout, |
| 283 |
.ndo_get_stats64 = dev_get_tstats64, |
| 284 |
.ndo_set_mac_address = eth_mac_addr, |
| 285 |
.ndo_validate_addr = eth_validate_addr, |
| 286 |
}; |
| 287 |
|
| 288 |
int |
| 289 |
generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) |
| 290 |
{ |
| 291 |
int retval; |
| 292 |
struct net_device *net = dev->net; |
| 293 |
struct cdc_state *info = (void *) &dev->data; |
| 294 |
union { |
| 295 |
void *buf; |
| 296 |
struct rndis_msg_hdr *header; |
| 297 |
struct rndis_init *init; |
| 298 |
struct rndis_init_c *init_c; |
| 299 |
struct rndis_query *get; |
| 300 |
struct rndis_query_c *get_c; |
| 301 |
struct rndis_set *set; |
| 302 |
struct rndis_set_c *set_c; |
| 303 |
struct rndis_halt *halt; |
| 304 |
} u; |
| 305 |
u32 tmp; |
| 306 |
__le32 phym_unspec, *phym; |
| 307 |
int reply_len; |
| 308 |
unsigned char *bp; |
| 309 |
|
| 310 |
/* we can't rely on i/o from stack working, or stack allocation */ |
| 311 |
u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL); |
| 312 |
if (!u.buf) |
| 313 |
return -ENOMEM; |
| 314 |
retval = usbnet_generic_cdc_bind(dev, intf); |
| 315 |
if (retval < 0) |
| 316 |
goto fail; |
| 317 |
|
| 318 |
u.init->msg_type = cpu_to_le32(RNDIS_MSG_INIT); |
| 319 |
u.init->msg_len = cpu_to_le32(sizeof *u.init); |
| 320 |
u.init->major_version = cpu_to_le32(1); |
| 321 |
u.init->minor_version = cpu_to_le32(0); |
| 322 |
|
| 323 |
/* max transfer (in spec) is 0x4000 at full speed, but for |
| 324 |
* TX we'll stick to one Ethernet packet plus RNDIS framing. |
| 325 |
* For RX we handle drivers that zero-pad to end-of-packet. |
| 326 |
* Don't let userspace change these settings. |
| 327 |
* |
| 328 |
* NOTE: there still seems to be weirdness here, as if we need |
| 329 |
* to do some more things to make sure WinCE targets accept this. |
| 330 |
* They default to jumbograms of 8KB or 16KB, which is absurd |
| 331 |
* for such low data rates and which is also more than Linux |
| 332 |
* can usually expect to allocate for SKB data... |
| 333 |
*/ |
| 334 |
net->hard_header_len += sizeof (struct rndis_data_hdr); |
| 335 |
dev->hard_mtu = net->mtu + net->hard_header_len; |
| 336 |
|
| 337 |
dev->maxpacket = usb_maxpacket(dev->udev, dev->out); |
| 338 |
if (dev->maxpacket == 0) { |
| 339 |
netif_dbg(dev, probe, dev->net, |
| 340 |
"dev->maxpacket can't be 0\n"); |
| 341 |
retval = -EINVAL; |
| 342 |
goto fail_and_release; |
| 343 |
} |
| 344 |
|
| 345 |
dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1); |
| 346 |
dev->rx_urb_size &= ~(dev->maxpacket - 1); |
| 347 |
u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size); |
| 348 |
|
| 349 |
net->netdev_ops = &rndis_netdev_ops; |
| 350 |
|
| 351 |
retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE); |
| 352 |
if (unlikely(retval < 0)) { |
| 353 |
/* it might not even be an RNDIS device!! */ |
| 354 |
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval); |
| 355 |
goto fail_and_release; |
| 356 |
} |
| 357 |
tmp = le32_to_cpu(u.init_c->max_transfer_size); |
| 358 |
if (tmp < dev->hard_mtu) { |
| 359 |
if (tmp <= net->hard_header_len) { |
| 360 |
dev_err(&intf->dev, |
| 361 |
"dev can't take %u byte packets (max %u)\n", |
| 362 |
dev->hard_mtu, tmp); |
| 363 |
retval = -EINVAL; |
| 364 |
goto halt_fail_and_release; |
| 365 |
} |
| 366 |
dev_warn(&intf->dev, |
| 367 |
"dev can't take %u byte packets (max %u), " |
| 368 |
"adjusting MTU to %u\n", |
| 369 |
dev->hard_mtu, tmp, tmp - net->hard_header_len); |
| 370 |
dev->hard_mtu = tmp; |
| 371 |
net->mtu = dev->hard_mtu - net->hard_header_len; |
| 372 |
} |
| 373 |
|
| 374 |
/* REVISIT: peripheral "alignment" request is ignored ... */ |
| 375 |
dev_dbg(&intf->dev, |
| 376 |
"hard mtu %u (%u from dev), rx buflen %zu, align %d\n", |
| 377 |
dev->hard_mtu, tmp, dev->rx_urb_size, |
| 378 |
1 << le32_to_cpu(u.init_c->packet_alignment)); |
| 379 |
|
| 380 |
/* module has some device initialization code needs to be done right |
| 381 |
* after RNDIS_INIT */ |
| 382 |
if (dev->driver_info->early_init && |
| 383 |
dev->driver_info->early_init(dev) != 0) |
| 384 |
goto halt_fail_and_release; |
| 385 |
|
| 386 |
/* Check physical medium */ |
| 387 |
phym = NULL; |
| 388 |
reply_len = sizeof *phym; |
| 389 |
retval = rndis_query(dev, intf, u.buf, |
| 390 |
RNDIS_OID_GEN_PHYSICAL_MEDIUM, |
| 391 |
reply_len, (void **)&phym, &reply_len); |
| 392 |
if (retval != 0 || !phym) { |
| 393 |
/* OID is optional so don't fail here. */ |
| 394 |
phym_unspec = cpu_to_le32(RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED); |
| 395 |
phym = &phym_unspec; |
| 396 |
} |
| 397 |
if ((flags & FLAG_RNDIS_PHYM_WIRELESS) && |
| 398 |
le32_to_cpup(phym) != RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) { |
| 399 |
netif_dbg(dev, probe, dev->net, |
| 400 |
"driver requires wireless physical medium, but device is not\n"); |
| 401 |
retval = -ENODEV; |
| 402 |
goto halt_fail_and_release; |
| 403 |
} |
| 404 |
if ((flags & FLAG_RNDIS_PHYM_NOT_WIRELESS) && |
| 405 |
le32_to_cpup(phym) == RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) { |
| 406 |
netif_dbg(dev, probe, dev->net, |
| 407 |
"driver requires non-wireless physical medium, but device is wireless.\n"); |
| 408 |
retval = -ENODEV; |
| 409 |
goto halt_fail_and_release; |
| 410 |
} |
| 411 |
|
| 412 |
/* Get designated host ethernet address */ |
| 413 |
reply_len = ETH_ALEN; |
| 414 |
retval = rndis_query(dev, intf, u.buf, |
| 415 |
RNDIS_OID_802_3_PERMANENT_ADDRESS, |
| 416 |
48, (void **) &bp, &reply_len); |
| 417 |
if (unlikely(retval< 0)) { |
| 418 |
dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval); |
| 419 |
goto halt_fail_and_release; |
| 420 |
} |
| 421 |
|
| 422 |
eth_hw_addr_set(net, bp); |
| 423 |
|
| 424 |
/* set a nonzero filter to enable data transfers */ |
| 425 |
memset(u.set, 0, sizeof *u.set); |
| 426 |
u.set->msg_type = cpu_to_le32(RNDIS_MSG_SET); |
| 427 |
u.set->msg_len = cpu_to_le32(4 + sizeof *u.set); |
| 428 |
u.set->oid = cpu_to_le32(RNDIS_OID_GEN_CURRENT_PACKET_FILTER); |
| 429 |
u.set->len = cpu_to_le32(4); |
| 430 |
u.set->offset = cpu_to_le32((sizeof *u.set) - 8); |
| 431 |
*(__le32 *)(u.buf + sizeof *u.set) = cpu_to_le32(RNDIS_DEFAULT_FILTER); |
| 432 |
|
| 433 |
retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE); |
| 434 |
if (unlikely(retval < 0)) { |
| 435 |
dev_err(&intf->dev, "rndis set packet filter, %d\n", retval); |
| 436 |
goto halt_fail_and_release; |
| 437 |
} |
| 438 |
|
| 439 |
retval = 0; |
| 440 |
|
| 441 |
kfree(u.buf); |
| 442 |
return retval; |
| 443 |
|
| 444 |
halt_fail_and_release: |
| 445 |
memset(u.halt, 0, sizeof *u.halt); |
| 446 |
u.halt->msg_type = cpu_to_le32(RNDIS_MSG_HALT); |
| 447 |
u.halt->msg_len = cpu_to_le32(sizeof *u.halt); |
| 448 |
(void) rndis_command(dev, (void *)u.halt, CONTROL_BUFFER_SIZE); |
| 449 |
fail_and_release: |
| 450 |
usb_set_intfdata(info->data, NULL); |
| 451 |
usb_driver_release_interface(driver_of(intf), info->data); |
| 452 |
info->data = NULL; |
| 453 |
fail: |
| 454 |
kfree(u.buf); |
| 455 |
return retval; |
| 456 |
} |
| 457 |
EXPORT_SYMBOL_GPL(generic_rndis_bind); |
| 458 |
|
| 459 |
static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) |
| 460 |
{ |
| 461 |
return generic_rndis_bind(dev, intf, FLAG_RNDIS_PHYM_NOT_WIRELESS); |
| 462 |
} |
| 463 |
|
| 464 |
static int zte_rndis_bind(struct usbnet *dev, struct usb_interface *intf) |
| 465 |
{ |
| 466 |
int status = rndis_bind(dev, intf); |
| 467 |
|
| 468 |
if (!status && (dev->net->dev_addr[0] & 0x02)) |
| 469 |
eth_hw_addr_random(dev->net); |
| 470 |
|
| 471 |
return status; |
| 472 |
} |
| 473 |
|
| 474 |
void rndis_unbind(struct usbnet *dev, struct usb_interface *intf) |
| 475 |
{ |
| 476 |
struct rndis_halt *halt; |
| 477 |
|
| 478 |
/* try to clear any rndis state/activity (no i/o from stack!) */ |
| 479 |
halt = kzalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL); |
| 480 |
if (halt) { |
| 481 |
halt->msg_type = cpu_to_le32(RNDIS_MSG_HALT); |
| 482 |
halt->msg_len = cpu_to_le32(sizeof *halt); |
| 483 |
(void) rndis_command(dev, (void *)halt, CONTROL_BUFFER_SIZE); |
| 484 |
kfree(halt); |
| 485 |
} |
| 486 |
|
| 487 |
usbnet_cdc_unbind(dev, intf); |
| 488 |
} |
| 489 |
EXPORT_SYMBOL_GPL(rndis_unbind); |
| 490 |
|
| 491 |
/* |
| 492 |
* DATA -- host must not write zlps |
| 493 |
*/ |
| 494 |
int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| 495 |
{ |
| 496 |
bool dst_mac_fixup; |
| 497 |
|
| 498 |
/* This check is no longer done by usbnet */ |
| 499 |
if (skb->len < dev->net->hard_header_len) |
| 500 |
return 0; |
| 501 |
|
| 502 |
dst_mac_fixup = !!(dev->driver_info->data & RNDIS_DRIVER_DATA_DST_MAC_FIXUP); |
| 503 |
|
| 504 |
/* peripheral may have batched packets to us... */ |
| 505 |
while (likely(skb->len)) { |
| 506 |
struct rndis_data_hdr *hdr = (void *)skb->data; |
| 507 |
struct sk_buff *skb2; |
| 508 |
u32 msg_type, msg_len, data_offset, data_len; |
| 509 |
|
| 510 |
msg_type = le32_to_cpu(hdr->msg_type); |
| 511 |
msg_len = le32_to_cpu(hdr->msg_len); |
| 512 |
data_offset = le32_to_cpu(hdr->data_offset); |
| 513 |
data_len = le32_to_cpu(hdr->data_len); |
| 514 |
|
| 515 |
/* don't choke if we see oob, per-packet data, etc */ |
| 516 |
if (unlikely(msg_type != RNDIS_MSG_PACKET || skb->len < msg_len |
| 517 |
|| (data_offset + data_len + 8) > msg_len)) { |
| 518 |
dev->net->stats.rx_frame_errors++; |
| 519 |
netdev_dbg(dev->net, "bad rndis message %d/%d/%d/%d, len %d\n", |
| 520 |
le32_to_cpu(hdr->msg_type), |
| 521 |
msg_len, data_offset, data_len, skb->len); |
| 522 |
return 0; |
| 523 |
} |
| 524 |
skb_pull(skb, 8 + data_offset); |
| 525 |
|
| 526 |
/* at most one packet left? */ |
| 527 |
if (likely((data_len - skb->len) <= sizeof *hdr)) { |
| 528 |
skb_trim(skb, data_len); |
| 529 |
break; |
| 530 |
} |
| 531 |
|
| 532 |
/* try to return all the packets in the batch */ |
| 533 |
skb2 = skb_clone(skb, GFP_ATOMIC); |
| 534 |
if (unlikely(!skb2)) |
| 535 |
break; |
| 536 |
skb_pull(skb, msg_len - sizeof *hdr); |
| 537 |
skb_trim(skb2, data_len); |
| 538 |
|
| 539 |
if (unlikely(dst_mac_fixup)) |
| 540 |
usbnet_cdc_zte_rx_fixup(dev, skb2); |
| 541 |
|
| 542 |
usbnet_skb_return(dev, skb2); |
| 543 |
} |
| 544 |
|
| 545 |
/* caller will usbnet_skb_return the remaining packet */ |
| 546 |
if (unlikely(dst_mac_fixup)) |
| 547 |
usbnet_cdc_zte_rx_fixup(dev, skb); |
| 548 |
|
| 549 |
return 1; |
| 550 |
} |
| 551 |
EXPORT_SYMBOL_GPL(rndis_rx_fixup); |
| 552 |
|
| 553 |
struct sk_buff * |
| 554 |
rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) |
| 555 |
{ |
| 556 |
struct rndis_data_hdr *hdr; |
| 557 |
struct sk_buff *skb2; |
| 558 |
unsigned len = skb->len; |
| 559 |
|
| 560 |
if (likely(!skb_cloned(skb))) { |
| 561 |
int room = skb_headroom(skb); |
| 562 |
|
| 563 |
/* enough head room as-is? */ |
| 564 |
if (unlikely((sizeof *hdr) <= room)) |
| 565 |
goto fill; |
| 566 |
|
| 567 |
/* enough room, but needs to be readjusted? */ |
| 568 |
room += skb_tailroom(skb); |
| 569 |
if (likely((sizeof *hdr) <= room)) { |
| 570 |
skb->data = memmove(skb->head + sizeof *hdr, |
| 571 |
skb->data, len); |
| 572 |
skb_set_tail_pointer(skb, len); |
| 573 |
goto fill; |
| 574 |
} |
| 575 |
} |
| 576 |
|
| 577 |
/* create a new skb, with the correct size (and tailpad) */ |
| 578 |
skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags); |
| 579 |
dev_kfree_skb_any(skb); |
| 580 |
if (unlikely(!skb2)) |
| 581 |
return skb2; |
| 582 |
skb = skb2; |
| 583 |
|
| 584 |
/* fill out the RNDIS header. we won't bother trying to batch |
| 585 |
* packets; Linux minimizes wasted bandwidth through tx queues. |
| 586 |
*/ |
| 587 |
fill: |
| 588 |
hdr = __skb_push(skb, sizeof *hdr); |
| 589 |
memset(hdr, 0, sizeof *hdr); |
| 590 |
hdr->msg_type = cpu_to_le32(RNDIS_MSG_PACKET); |
| 591 |
hdr->msg_len = cpu_to_le32(skb->len); |
| 592 |
hdr->data_offset = cpu_to_le32(sizeof(*hdr) - 8); |
| 593 |
hdr->data_len = cpu_to_le32(len); |
| 594 |
|
| 595 |
/* FIXME make the last packet always be short ... */ |
| 596 |
return skb; |
| 597 |
} |
| 598 |
EXPORT_SYMBOL_GPL(rndis_tx_fixup); |
| 599 |
|
| 600 |
|
| 601 |
static const struct driver_info rndis_info = { |
| 602 |
.description = "RNDIS device", |
| 603 |
.flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT, |
| 604 |
.bind = rndis_bind, |
| 605 |
.unbind = rndis_unbind, |
| 606 |
.status = rndis_status, |
| 607 |
.rx_fixup = rndis_rx_fixup, |
| 608 |
.tx_fixup = rndis_tx_fixup, |
| 609 |
}; |
| 610 |
|
| 611 |
static const struct driver_info rndis_poll_status_info = { |
| 612 |
.description = "RNDIS device (poll status before control)", |
| 613 |
.flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT, |
| 614 |
.data = RNDIS_DRIVER_DATA_POLL_STATUS, |
| 615 |
.bind = rndis_bind, |
| 616 |
.unbind = rndis_unbind, |
| 617 |
.status = rndis_status, |
| 618 |
.rx_fixup = rndis_rx_fixup, |
| 619 |
.tx_fixup = rndis_tx_fixup, |
| 620 |
}; |
| 621 |
|
| 622 |
static const struct driver_info zte_rndis_info = { |
| 623 |
.description = "ZTE RNDIS device", |
| 624 |
.flags = FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT, |
| 625 |
.data = RNDIS_DRIVER_DATA_DST_MAC_FIXUP, |
| 626 |
.bind = zte_rndis_bind, |
| 627 |
.unbind = rndis_unbind, |
| 628 |
.status = rndis_status, |
| 629 |
.rx_fixup = rndis_rx_fixup, |
| 630 |
.tx_fixup = rndis_tx_fixup, |
| 631 |
}; |
| 632 |
|
| 633 |
/*-------------------------------------------------------------------------*/ |
| 634 |
|
| 635 |
static const struct usb_device_id products [] = { |
| 636 |
{ |
| 637 |
/* 2Wire HomePortal 1000SW */ |
| 638 |
USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042, |
| 639 |
USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| 640 |
.driver_info = (unsigned long) &rndis_poll_status_info, |
| 641 |
}, { |
| 642 |
/* Hytera Communications DMR radios' "Radio to PC Network" */ |
| 643 |
USB_VENDOR_AND_INTERFACE_INFO(0x238b, |
| 644 |
USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| 645 |
.driver_info = (unsigned long)&rndis_info, |
| 646 |
}, { |
| 647 |
/* ZTE WWAN modules */ |
| 648 |
USB_VENDOR_AND_INTERFACE_INFO(0x19d2, |
| 649 |
USB_CLASS_WIRELESS_CONTROLLER, 1, 3), |
| 650 |
.driver_info = (unsigned long)&zte_rndis_info, |
| 651 |
}, { |
| 652 |
/* ZTE WWAN modules, ACM flavour */ |
| 653 |
USB_VENDOR_AND_INTERFACE_INFO(0x19d2, |
| 654 |
USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| 655 |
.driver_info = (unsigned long)&zte_rndis_info, |
| 656 |
}, { |
| 657 |
/* RNDIS is MSFT's un-official variant of CDC ACM */ |
| 658 |
USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff), |
| 659 |
.driver_info = (unsigned long) &rndis_info, |
| 660 |
}, { |
| 661 |
/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */ |
| 662 |
USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1), |
| 663 |
.driver_info = (unsigned long) &rndis_poll_status_info, |
| 664 |
}, { |
| 665 |
/* RNDIS for tethering */ |
| 666 |
USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3), |
| 667 |
.driver_info = (unsigned long) &rndis_info, |
| 668 |
}, { |
| 669 |
/* Novatel Verizon USB730L */ |
| 670 |
USB_INTERFACE_INFO(USB_CLASS_MISC, 4, 1), |
| 671 |
.driver_info = (unsigned long) &rndis_info, |
| 672 |
}, |
| 673 |
{ }, // END |
| 674 |
}; |
| 675 |
MODULE_DEVICE_TABLE(usb, products); |
| 676 |
|
| 677 |
static struct usb_driver rndis_driver = { |
| 678 |
.name = "rndis_host", |
| 679 |
.id_table = products, |
| 680 |
.probe = usbnet_probe, |
| 681 |
.disconnect = usbnet_disconnect, |
| 682 |
.suspend = usbnet_suspend, |
| 683 |
.resume = usbnet_resume, |
| 684 |
.disable_hub_initiated_lpm = 1, |
| 685 |
}; |
| 686 |
|
| 687 |
module_usb_driver(rndis_driver); |
| 688 |
|
| 689 |
MODULE_AUTHOR("David Brownell"); |
| 690 |
MODULE_DESCRIPTION("USB Host side RNDIS driver"); |
| 691 |
MODULE_LICENSE("GPL"); |