Debian Codegraph @

drivers/net/usb/int51x1.c

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (c) 2009 Peter Holik
4 *
5 * Intellon usb PLC (Powerline Communications) usb net driver
6 *
7 * https://web.archive.org/web/20101025091240id_/http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
8 *
9 * Based on the work of Jan 'RedBully' Seiffert
10 */
11
12 #include <linux/module.h>
13 #include <linux/ctype.h>
14 #include <linux/netdevice.h>
15 #include <linux/etherdevice.h>
16 #include <linux/ethtool.h>
17 #include <linux/slab.h>
18 #include <linux/mii.h>
19 #include <linux/usb.h>
20 #include <linux/usb/usbnet.h>
21
22 #define INT51X1_VENDOR_ID 0x09e1
23 #define INT51X1_PRODUCT_ID 0x5121
24
25 #define INT51X1_HEADER_SIZE 2 /* 2 byte header */
26
27 static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
28 {
29 int len;
30
31 if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
32 netdev_err(dev->net, "unexpected tiny rx frame\n");
33 return 0;
34 }
35
36 len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
37
38 skb_trim(skb, len);
39
40 return 1;
41 }
42
43 static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
44 struct sk_buff *skb, gfp_t flags)
45 {
46 int pack_len = skb->len;
47 int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
48 int headroom = skb_headroom(skb);
49 int tailroom = skb_tailroom(skb);
50 int need_tail = 0;
51 __le16 *len;
52
53 /* if packet and our header is smaller than 64 pad to 64 (+ ZLP) */
54 if ((pack_with_header_len) < dev->maxpacket)
55 need_tail = dev->maxpacket - pack_with_header_len + 1;
56 /*
57 * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
58 * but we need to know ourself, because this would add to the length
59 * we send down to the device...
60 */
61 else if (!(pack_with_header_len % dev->maxpacket))
62 need_tail = 1;
63
64 if (!skb_cloned(skb) &&
65 (headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
66 if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
67 skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
68 skb->data, skb->len);
69 skb_set_tail_pointer(skb, skb->len);
70 }
71 } else {
72 struct sk_buff *skb2;
73
74 skb2 = skb_copy_expand(skb,
75 INT51X1_HEADER_SIZE,
76 need_tail,
77 flags);
78 dev_kfree_skb_any(skb);
79 if (!skb2)
80 return NULL;
81 skb = skb2;
82 }
83
84 pack_len += need_tail;
85 pack_len &= 0x07ff;
86
87 len = __skb_push(skb, INT51X1_HEADER_SIZE);
88 *len = cpu_to_le16(pack_len);
89
90 if(need_tail)
91 __skb_put_zero(skb, need_tail);
92
93 return skb;
94 }
95
96 static const struct net_device_ops int51x1_netdev_ops = {
97 .ndo_open = usbnet_open,
98 .ndo_stop = usbnet_stop,
99 .ndo_start_xmit = usbnet_start_xmit,
100 .ndo_tx_timeout = usbnet_tx_timeout,
101 .ndo_change_mtu = usbnet_change_mtu,
102 .ndo_get_stats64 = dev_get_tstats64,
103 .ndo_set_mac_address = eth_mac_addr,
104 .ndo_validate_addr = eth_validate_addr,
105 .ndo_set_rx_mode = usbnet_set_rx_mode,
106 };
107
108 static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
109 {
110 int status = usbnet_get_ethernet_addr(dev, 3);
111
112 if (status)
113 return status;
114
115 dev->net->hard_header_len += INT51X1_HEADER_SIZE;
116 dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
117 dev->net->netdev_ops = &int51x1_netdev_ops;
118
119 return usbnet_get_endpoints(dev, intf);
120 }
121
122 static const struct driver_info int51x1_info = {
123 .description = "Intellon usb powerline adapter",
124 .bind = int51x1_bind,
125 .rx_fixup = int51x1_rx_fixup,
126 .tx_fixup = int51x1_tx_fixup,
127 .set_rx_mode = usbnet_cdc_update_filter,
128 .in = 1,
129 .out = 2,
130 .flags = FLAG_ETHER,
131 };
132
133 static const struct usb_device_id products[] = {
134 {
135 USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
136 .driver_info = (unsigned long) &int51x1_info,
137 },
138 {},
139 };
140 MODULE_DEVICE_TABLE(usb, products);
141
142 static struct usb_driver int51x1_driver = {
143 .name = "int51x1",
144 .id_table = products,
145 .probe = usbnet_probe,
146 .disconnect = usbnet_disconnect,
147 .suspend = usbnet_suspend,
148 .resume = usbnet_resume,
149 .disable_hub_initiated_lpm = 1,
150 };
151
152 module_usb_driver(int51x1_driver);
153
154 MODULE_AUTHOR("Peter Holik");
155 MODULE_DESCRIPTION("Intellon usb powerline adapter");
156 MODULE_LICENSE("GPL");