| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* ASIX AX8817X based USB 2.0 Ethernet Devices |
| 4 |
* Copyright (C) 2003-2006 David Hollis <[email protected]> |
| 5 |
* Copyright (C) 2005 Phil Chang <[email protected]> |
| 6 |
* Copyright (C) 2006 James Painter <[email protected]> |
| 7 |
* Copyright (c) 2002-2003 TiVo Inc. |
| 8 |
*/ |
| 9 |
|
| 10 |
#include "asix.h" |
| 11 |
|
| 12 |
#define AX_HOST_EN_RETRIES 30 |
| 13 |
|
| 14 |
int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| 15 |
u16 size, void *data, int in_pm) |
| 16 |
{ |
| 17 |
int ret; |
| 18 |
int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); |
| 19 |
|
| 20 |
BUG_ON(!dev); |
| 21 |
|
| 22 |
if (!in_pm) |
| 23 |
fn = usbnet_read_cmd; |
| 24 |
else |
| 25 |
fn = usbnet_read_cmd_nopm; |
| 26 |
|
| 27 |
ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 28 |
value, index, data, size); |
| 29 |
|
| 30 |
if (unlikely(ret < size)) { |
| 31 |
ret = ret < 0 ? ret : -ENODATA; |
| 32 |
|
| 33 |
netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", |
| 34 |
index, ret); |
| 35 |
} |
| 36 |
|
| 37 |
return ret; |
| 38 |
} |
| 39 |
|
| 40 |
int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| 41 |
u16 size, void *data, int in_pm) |
| 42 |
{ |
| 43 |
int ret; |
| 44 |
int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); |
| 45 |
|
| 46 |
BUG_ON(!dev); |
| 47 |
|
| 48 |
if (!in_pm) |
| 49 |
fn = usbnet_write_cmd; |
| 50 |
else |
| 51 |
fn = usbnet_write_cmd_nopm; |
| 52 |
|
| 53 |
ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 54 |
value, index, data, size); |
| 55 |
|
| 56 |
if (unlikely(ret < 0)) |
| 57 |
netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", |
| 58 |
index, ret); |
| 59 |
|
| 60 |
return ret; |
| 61 |
} |
| 62 |
|
| 63 |
void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| 64 |
u16 size, void *data) |
| 65 |
{ |
| 66 |
usbnet_write_cmd_async(dev, cmd, |
| 67 |
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 68 |
value, index, data, size); |
| 69 |
} |
| 70 |
|
| 71 |
static int asix_set_sw_mii(struct usbnet *dev, int in_pm) |
| 72 |
{ |
| 73 |
int ret; |
| 74 |
|
| 75 |
ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm); |
| 76 |
|
| 77 |
if (ret < 0) |
| 78 |
netdev_err(dev->net, "Failed to enable software MII access\n"); |
| 79 |
return ret; |
| 80 |
} |
| 81 |
|
| 82 |
static int asix_set_hw_mii(struct usbnet *dev, int in_pm) |
| 83 |
{ |
| 84 |
int ret; |
| 85 |
|
| 86 |
ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm); |
| 87 |
if (ret < 0) |
| 88 |
netdev_err(dev->net, "Failed to enable hardware MII access\n"); |
| 89 |
return ret; |
| 90 |
} |
| 91 |
|
| 92 |
static int asix_check_host_enable(struct usbnet *dev, int in_pm) |
| 93 |
{ |
| 94 |
int i, ret; |
| 95 |
u8 smsr; |
| 96 |
|
| 97 |
for (i = 0; i < AX_HOST_EN_RETRIES; ++i) { |
| 98 |
ret = asix_set_sw_mii(dev, in_pm); |
| 99 |
if (ret == -ENODEV || ret == -ETIMEDOUT) |
| 100 |
break; |
| 101 |
usleep_range(1000, 1100); |
| 102 |
ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, |
| 103 |
0, 0, 1, &smsr, in_pm); |
| 104 |
if (ret == -ENODEV) |
| 105 |
break; |
| 106 |
else if (ret < 0) |
| 107 |
continue; |
| 108 |
else if (smsr & AX_HOST_EN) |
| 109 |
break; |
| 110 |
} |
| 111 |
|
| 112 |
return i >= AX_HOST_EN_RETRIES ? -ETIMEDOUT : ret; |
| 113 |
} |
| 114 |
|
| 115 |
static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx) |
| 116 |
{ |
| 117 |
/* Reset the variables that have a lifetime outside of |
| 118 |
* asix_rx_fixup_internal() so that future processing starts from a |
| 119 |
* known set of initial conditions. |
| 120 |
*/ |
| 121 |
|
| 122 |
if (rx->ax_skb) { |
| 123 |
/* Discard any incomplete Ethernet frame in the netdev buffer */ |
| 124 |
kfree_skb(rx->ax_skb); |
| 125 |
rx->ax_skb = NULL; |
| 126 |
} |
| 127 |
|
| 128 |
/* Assume the Data header 32-bit word is at the start of the current |
| 129 |
* or next URB socket buffer so reset all the state variables. |
| 130 |
*/ |
| 131 |
rx->remaining = 0; |
| 132 |
rx->split_head = false; |
| 133 |
rx->header = 0; |
| 134 |
} |
| 135 |
|
| 136 |
int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb, |
| 137 |
struct asix_rx_fixup_info *rx) |
| 138 |
{ |
| 139 |
int offset = 0; |
| 140 |
u16 size; |
| 141 |
|
| 142 |
/* When an Ethernet frame spans multiple URB socket buffers, |
| 143 |
* do a sanity test for the Data header synchronisation. |
| 144 |
* Attempt to detect the situation of the previous socket buffer having |
| 145 |
* been truncated or a socket buffer was missing. These situations |
| 146 |
* cause a discontinuity in the data stream and therefore need to avoid |
| 147 |
* appending bad data to the end of the current netdev socket buffer. |
| 148 |
* Also avoid unnecessarily discarding a good current netdev socket |
| 149 |
* buffer. |
| 150 |
*/ |
| 151 |
if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) { |
| 152 |
offset = ((rx->remaining + 1) & 0xfffe); |
| 153 |
rx->header = get_unaligned_le32(skb->data + offset); |
| 154 |
offset = 0; |
| 155 |
|
| 156 |
size = (u16)(rx->header & 0x7ff); |
| 157 |
if (size != ((~rx->header >> 16) & 0x7ff)) { |
| 158 |
netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n", |
| 159 |
rx->remaining); |
| 160 |
reset_asix_rx_fixup_info(rx); |
| 161 |
} |
| 162 |
} |
| 163 |
|
| 164 |
while (offset + sizeof(u16) <= skb->len) { |
| 165 |
u16 copy_length; |
| 166 |
|
| 167 |
if (!rx->remaining) { |
| 168 |
if (skb->len - offset == sizeof(u16)) { |
| 169 |
rx->header = get_unaligned_le16( |
| 170 |
skb->data + offset); |
| 171 |
rx->split_head = true; |
| 172 |
offset += sizeof(u16); |
| 173 |
break; |
| 174 |
} |
| 175 |
|
| 176 |
if (rx->split_head == true) { |
| 177 |
rx->header |= (get_unaligned_le16( |
| 178 |
skb->data + offset) << 16); |
| 179 |
rx->split_head = false; |
| 180 |
offset += sizeof(u16); |
| 181 |
} else { |
| 182 |
rx->header = get_unaligned_le32(skb->data + |
| 183 |
offset); |
| 184 |
offset += sizeof(u32); |
| 185 |
} |
| 186 |
|
| 187 |
/* take frame length from Data header 32-bit word */ |
| 188 |
size = (u16)(rx->header & 0x7ff); |
| 189 |
if (size != ((~rx->header >> 16) & 0x7ff)) { |
| 190 |
netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n", |
| 191 |
rx->header, offset); |
| 192 |
reset_asix_rx_fixup_info(rx); |
| 193 |
return 0; |
| 194 |
} |
| 195 |
if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) { |
| 196 |
netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n", |
| 197 |
size); |
| 198 |
reset_asix_rx_fixup_info(rx); |
| 199 |
return 0; |
| 200 |
} |
| 201 |
|
| 202 |
/* Sometimes may fail to get a netdev socket buffer but |
| 203 |
* continue to process the URB socket buffer so that |
| 204 |
* synchronisation of the Ethernet frame Data header |
| 205 |
* word is maintained. |
| 206 |
*/ |
| 207 |
rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size); |
| 208 |
|
| 209 |
rx->remaining = size; |
| 210 |
} |
| 211 |
|
| 212 |
if (rx->remaining > skb->len - offset) { |
| 213 |
copy_length = skb->len - offset; |
| 214 |
rx->remaining -= copy_length; |
| 215 |
} else { |
| 216 |
copy_length = rx->remaining; |
| 217 |
rx->remaining = 0; |
| 218 |
} |
| 219 |
|
| 220 |
if (rx->ax_skb) { |
| 221 |
skb_put_data(rx->ax_skb, skb->data + offset, |
| 222 |
copy_length); |
| 223 |
if (!rx->remaining) { |
| 224 |
usbnet_skb_return(dev, rx->ax_skb); |
| 225 |
rx->ax_skb = NULL; |
| 226 |
} |
| 227 |
} |
| 228 |
|
| 229 |
offset += (copy_length + 1) & 0xfffe; |
| 230 |
} |
| 231 |
|
| 232 |
if (skb->len != offset) { |
| 233 |
netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n", |
| 234 |
skb->len, offset); |
| 235 |
reset_asix_rx_fixup_info(rx); |
| 236 |
return 0; |
| 237 |
} |
| 238 |
|
| 239 |
return 1; |
| 240 |
} |
| 241 |
|
| 242 |
int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb) |
| 243 |
{ |
| 244 |
struct asix_common_private *dp = dev->driver_priv; |
| 245 |
struct asix_rx_fixup_info *rx = &dp->rx_fixup_info; |
| 246 |
|
| 247 |
return asix_rx_fixup_internal(dev, skb, rx); |
| 248 |
} |
| 249 |
|
| 250 |
void asix_rx_fixup_common_free(struct asix_common_private *dp) |
| 251 |
{ |
| 252 |
struct asix_rx_fixup_info *rx; |
| 253 |
|
| 254 |
if (!dp) |
| 255 |
return; |
| 256 |
|
| 257 |
rx = &dp->rx_fixup_info; |
| 258 |
|
| 259 |
if (rx->ax_skb) { |
| 260 |
kfree_skb(rx->ax_skb); |
| 261 |
rx->ax_skb = NULL; |
| 262 |
} |
| 263 |
} |
| 264 |
|
| 265 |
struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| 266 |
gfp_t flags) |
| 267 |
{ |
| 268 |
int padlen; |
| 269 |
int headroom = skb_headroom(skb); |
| 270 |
int tailroom = skb_tailroom(skb); |
| 271 |
u32 packet_len; |
| 272 |
u32 padbytes = 0xffff0000; |
| 273 |
void *ptr; |
| 274 |
|
| 275 |
padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; |
| 276 |
|
| 277 |
/* We need to push 4 bytes in front of frame (packet_len) |
| 278 |
* and maybe add 4 bytes after the end (if padlen is 4) |
| 279 |
* |
| 280 |
* Avoid skb_copy_expand() expensive call, using following rules : |
| 281 |
* - We are allowed to push 4 bytes in headroom if skb_header_cloned() |
| 282 |
* is false (and if we have 4 bytes of headroom) |
| 283 |
* - We are allowed to put 4 bytes at tail if skb_cloned() |
| 284 |
* is false (and if we have 4 bytes of tailroom) |
| 285 |
* |
| 286 |
* TCP packets for example are cloned, but __skb_header_release() |
| 287 |
* was called in tcp stack, allowing us to use headroom for our needs. |
| 288 |
*/ |
| 289 |
if (!skb_header_cloned(skb) && |
| 290 |
!(padlen && skb_cloned(skb)) && |
| 291 |
headroom + tailroom >= 4 + padlen) { |
| 292 |
/* following should not happen, but better be safe */ |
| 293 |
if (headroom < 4 || |
| 294 |
tailroom < padlen) { |
| 295 |
skb->data = memmove(skb->head + 4, skb->data, skb->len); |
| 296 |
skb_set_tail_pointer(skb, skb->len); |
| 297 |
} |
| 298 |
} else { |
| 299 |
struct sk_buff *skb2; |
| 300 |
|
| 301 |
skb2 = skb_copy_expand(skb, 4, padlen, flags); |
| 302 |
dev_kfree_skb_any(skb); |
| 303 |
skb = skb2; |
| 304 |
if (!skb) |
| 305 |
return NULL; |
| 306 |
} |
| 307 |
|
| 308 |
packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len; |
| 309 |
ptr = skb_push(skb, 4); |
| 310 |
put_unaligned_le32(packet_len, ptr); |
| 311 |
|
| 312 |
if (padlen) { |
| 313 |
put_unaligned_le32(padbytes, skb_tail_pointer(skb)); |
| 314 |
skb_put(skb, sizeof(padbytes)); |
| 315 |
} |
| 316 |
|
| 317 |
usbnet_set_skb_tx_stats(skb, 1, 0); |
| 318 |
return skb; |
| 319 |
} |
| 320 |
|
| 321 |
int asix_read_phy_addr(struct usbnet *dev, bool internal) |
| 322 |
{ |
| 323 |
int ret, offset; |
| 324 |
u8 buf[2]; |
| 325 |
|
| 326 |
ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0); |
| 327 |
if (ret < 0) |
| 328 |
goto error; |
| 329 |
|
| 330 |
if (ret < 2) { |
| 331 |
ret = -EIO; |
| 332 |
goto error; |
| 333 |
} |
| 334 |
|
| 335 |
offset = (internal ? 1 : 0); |
| 336 |
ret = buf[offset]; |
| 337 |
|
| 338 |
if (ret >= PHY_MAX_ADDR) { |
| 339 |
netdev_err(dev->net, "invalid PHY address: %d\n", ret); |
| 340 |
return -ENODEV; |
| 341 |
} |
| 342 |
|
| 343 |
netdev_dbg(dev->net, "%s PHY address 0x%x\n", |
| 344 |
internal ? "internal" : "external", ret); |
| 345 |
|
| 346 |
return ret; |
| 347 |
|
| 348 |
error: |
| 349 |
netdev_err(dev->net, "Error reading PHY_ID register: %02x\n", ret); |
| 350 |
|
| 351 |
return ret; |
| 352 |
} |
| 353 |
|
| 354 |
int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm) |
| 355 |
{ |
| 356 |
int ret; |
| 357 |
|
| 358 |
ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm); |
| 359 |
if (ret < 0) |
| 360 |
netdev_err(dev->net, "Failed to send software reset: %02x\n", ret); |
| 361 |
|
| 362 |
return ret; |
| 363 |
} |
| 364 |
|
| 365 |
u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm) |
| 366 |
{ |
| 367 |
__le16 v; |
| 368 |
int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm); |
| 369 |
|
| 370 |
if (ret < 0) { |
| 371 |
netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret); |
| 372 |
goto out; |
| 373 |
} |
| 374 |
ret = le16_to_cpu(v); |
| 375 |
out: |
| 376 |
return ret; |
| 377 |
} |
| 378 |
|
| 379 |
int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm) |
| 380 |
{ |
| 381 |
int ret; |
| 382 |
|
| 383 |
netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode); |
| 384 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm); |
| 385 |
if (ret < 0) |
| 386 |
netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n", |
| 387 |
mode, ret); |
| 388 |
|
| 389 |
return ret; |
| 390 |
} |
| 391 |
|
| 392 |
u16 asix_read_medium_status(struct usbnet *dev, int in_pm) |
| 393 |
{ |
| 394 |
__le16 v; |
| 395 |
int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, |
| 396 |
0, 0, 2, &v, in_pm); |
| 397 |
|
| 398 |
if (ret < 0) { |
| 399 |
netdev_err(dev->net, "Error reading Medium Status register: %02x\n", |
| 400 |
ret); |
| 401 |
return ret; /* TODO: callers not checking for error ret */ |
| 402 |
} |
| 403 |
|
| 404 |
return le16_to_cpu(v); |
| 405 |
|
| 406 |
} |
| 407 |
|
| 408 |
int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm) |
| 409 |
{ |
| 410 |
int ret; |
| 411 |
|
| 412 |
netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode); |
| 413 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, |
| 414 |
mode, 0, 0, NULL, in_pm); |
| 415 |
if (ret < 0) |
| 416 |
netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n", |
| 417 |
mode, ret); |
| 418 |
|
| 419 |
return ret; |
| 420 |
} |
| 421 |
|
| 422 |
int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm) |
| 423 |
{ |
| 424 |
int ret; |
| 425 |
|
| 426 |
netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value); |
| 427 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm); |
| 428 |
if (ret < 0) |
| 429 |
netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n", |
| 430 |
value, ret); |
| 431 |
|
| 432 |
if (sleep) |
| 433 |
msleep(sleep); |
| 434 |
|
| 435 |
return ret; |
| 436 |
} |
| 437 |
|
| 438 |
/* |
| 439 |
* AX88772 & AX88178 have a 16-bit RX_CTL value |
| 440 |
*/ |
| 441 |
void asix_set_multicast(struct net_device *net) |
| 442 |
{ |
| 443 |
struct usbnet *dev = netdev_priv(net); |
| 444 |
struct asix_data *data = (struct asix_data *)&dev->data; |
| 445 |
u16 rx_ctl = AX_DEFAULT_RX_CTL; |
| 446 |
|
| 447 |
if (net->flags & IFF_PROMISC) { |
| 448 |
rx_ctl |= AX_RX_CTL_PRO; |
| 449 |
} else if (net->flags & IFF_ALLMULTI || |
| 450 |
netdev_mc_count(net) > AX_MAX_MCAST) { |
| 451 |
rx_ctl |= AX_RX_CTL_AMALL; |
| 452 |
} else if (netdev_mc_empty(net)) { |
| 453 |
/* just broadcast and directed */ |
| 454 |
} else { |
| 455 |
/* We use the 20 byte dev->data |
| 456 |
* for our 8 byte filter buffer |
| 457 |
* to avoid allocating memory that |
| 458 |
* is tricky to free later */ |
| 459 |
struct netdev_hw_addr *ha; |
| 460 |
u32 crc_bits; |
| 461 |
|
| 462 |
memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); |
| 463 |
|
| 464 |
/* Build the multicast hash filter. */ |
| 465 |
netdev_for_each_mc_addr(ha, net) { |
| 466 |
crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| 467 |
data->multi_filter[crc_bits >> 3] |= |
| 468 |
1 << (crc_bits & 7); |
| 469 |
} |
| 470 |
|
| 471 |
asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, |
| 472 |
AX_MCAST_FILTER_SIZE, data->multi_filter); |
| 473 |
|
| 474 |
rx_ctl |= AX_RX_CTL_AM; |
| 475 |
} |
| 476 |
|
| 477 |
asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); |
| 478 |
} |
| 479 |
|
| 480 |
static int __asix_mdio_read(struct net_device *netdev, int phy_id, int loc, |
| 481 |
bool in_pm) |
| 482 |
{ |
| 483 |
struct usbnet *dev = netdev_priv(netdev); |
| 484 |
__le16 res; |
| 485 |
int ret; |
| 486 |
|
| 487 |
mutex_lock(&dev->phy_mutex); |
| 488 |
|
| 489 |
ret = asix_check_host_enable(dev, in_pm); |
| 490 |
if (ret == -ENODEV || ret == -ETIMEDOUT) { |
| 491 |
mutex_unlock(&dev->phy_mutex); |
| 492 |
return ret; |
| 493 |
} |
| 494 |
|
| 495 |
ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, |
| 496 |
&res, in_pm); |
| 497 |
if (ret < 0) |
| 498 |
goto out; |
| 499 |
|
| 500 |
ret = asix_set_hw_mii(dev, in_pm); |
| 501 |
out: |
| 502 |
mutex_unlock(&dev->phy_mutex); |
| 503 |
|
| 504 |
netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", |
| 505 |
phy_id, loc, le16_to_cpu(res)); |
| 506 |
|
| 507 |
return ret < 0 ? ret : le16_to_cpu(res); |
| 508 |
} |
| 509 |
|
| 510 |
int asix_mdio_read(struct net_device *netdev, int phy_id, int loc) |
| 511 |
{ |
| 512 |
return __asix_mdio_read(netdev, phy_id, loc, false); |
| 513 |
} |
| 514 |
|
| 515 |
static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc, |
| 516 |
int val, bool in_pm) |
| 517 |
{ |
| 518 |
struct usbnet *dev = netdev_priv(netdev); |
| 519 |
__le16 res = cpu_to_le16(val); |
| 520 |
int ret; |
| 521 |
|
| 522 |
netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", |
| 523 |
phy_id, loc, val); |
| 524 |
|
| 525 |
mutex_lock(&dev->phy_mutex); |
| 526 |
|
| 527 |
ret = asix_check_host_enable(dev, in_pm); |
| 528 |
if (ret == -ENODEV) |
| 529 |
goto out; |
| 530 |
|
| 531 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, |
| 532 |
&res, in_pm); |
| 533 |
if (ret < 0) |
| 534 |
goto out; |
| 535 |
|
| 536 |
ret = asix_set_hw_mii(dev, in_pm); |
| 537 |
out: |
| 538 |
mutex_unlock(&dev->phy_mutex); |
| 539 |
|
| 540 |
return ret < 0 ? ret : 0; |
| 541 |
} |
| 542 |
|
| 543 |
void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) |
| 544 |
{ |
| 545 |
__asix_mdio_write(netdev, phy_id, loc, val, false); |
| 546 |
} |
| 547 |
|
| 548 |
/* MDIO read and write wrappers for phylib */ |
| 549 |
int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum) |
| 550 |
{ |
| 551 |
struct usbnet *priv = bus->priv; |
| 552 |
|
| 553 |
return __asix_mdio_read(priv->net, phy_id, regnum, false); |
| 554 |
} |
| 555 |
|
| 556 |
int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val) |
| 557 |
{ |
| 558 |
struct usbnet *priv = bus->priv; |
| 559 |
|
| 560 |
return __asix_mdio_write(priv->net, phy_id, regnum, val, false); |
| 561 |
} |
| 562 |
|
| 563 |
int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc) |
| 564 |
{ |
| 565 |
return __asix_mdio_read(netdev, phy_id, loc, true); |
| 566 |
} |
| 567 |
|
| 568 |
void |
| 569 |
asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val) |
| 570 |
{ |
| 571 |
__asix_mdio_write(netdev, phy_id, loc, val, true); |
| 572 |
} |
| 573 |
|
| 574 |
void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| 575 |
{ |
| 576 |
struct usbnet *dev = netdev_priv(net); |
| 577 |
u8 opt; |
| 578 |
|
| 579 |
if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, |
| 580 |
0, 0, 1, &opt, 0) < 0) { |
| 581 |
wolinfo->supported = 0; |
| 582 |
wolinfo->wolopts = 0; |
| 583 |
return; |
| 584 |
} |
| 585 |
wolinfo->supported = WAKE_PHY | WAKE_MAGIC; |
| 586 |
wolinfo->wolopts = 0; |
| 587 |
if (opt & AX_MONITOR_LINK) |
| 588 |
wolinfo->wolopts |= WAKE_PHY; |
| 589 |
if (opt & AX_MONITOR_MAGIC) |
| 590 |
wolinfo->wolopts |= WAKE_MAGIC; |
| 591 |
} |
| 592 |
|
| 593 |
int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| 594 |
{ |
| 595 |
struct usbnet *dev = netdev_priv(net); |
| 596 |
u8 opt = 0; |
| 597 |
|
| 598 |
if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) |
| 599 |
return -EINVAL; |
| 600 |
|
| 601 |
if (wolinfo->wolopts & WAKE_PHY) |
| 602 |
opt |= AX_MONITOR_LINK; |
| 603 |
if (wolinfo->wolopts & WAKE_MAGIC) |
| 604 |
opt |= AX_MONITOR_MAGIC; |
| 605 |
|
| 606 |
if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, |
| 607 |
opt, 0, 0, NULL, 0) < 0) |
| 608 |
return -EINVAL; |
| 609 |
|
| 610 |
return 0; |
| 611 |
} |
| 612 |
|
| 613 |
int asix_get_eeprom_len(struct net_device *net) |
| 614 |
{ |
| 615 |
return AX_EEPROM_LEN; |
| 616 |
} |
| 617 |
|
| 618 |
int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, |
| 619 |
u8 *data) |
| 620 |
{ |
| 621 |
struct usbnet *dev = netdev_priv(net); |
| 622 |
u16 *eeprom_buff; |
| 623 |
int first_word, last_word; |
| 624 |
int i; |
| 625 |
|
| 626 |
if (eeprom->len == 0) |
| 627 |
return -EINVAL; |
| 628 |
|
| 629 |
eeprom->magic = AX_EEPROM_MAGIC; |
| 630 |
|
| 631 |
first_word = eeprom->offset >> 1; |
| 632 |
last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
| 633 |
|
| 634 |
eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16), |
| 635 |
GFP_KERNEL); |
| 636 |
if (!eeprom_buff) |
| 637 |
return -ENOMEM; |
| 638 |
|
| 639 |
/* ax8817x returns 2 bytes from eeprom on read */ |
| 640 |
for (i = first_word; i <= last_word; i++) { |
| 641 |
if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2, |
| 642 |
&eeprom_buff[i - first_word], 0) < 0) { |
| 643 |
kfree(eeprom_buff); |
| 644 |
return -EIO; |
| 645 |
} |
| 646 |
} |
| 647 |
|
| 648 |
memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); |
| 649 |
kfree(eeprom_buff); |
| 650 |
return 0; |
| 651 |
} |
| 652 |
|
| 653 |
int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, |
| 654 |
u8 *data) |
| 655 |
{ |
| 656 |
struct usbnet *dev = netdev_priv(net); |
| 657 |
u16 *eeprom_buff; |
| 658 |
int first_word, last_word; |
| 659 |
int i; |
| 660 |
int ret; |
| 661 |
|
| 662 |
netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n", |
| 663 |
eeprom->len, eeprom->offset, eeprom->magic); |
| 664 |
|
| 665 |
if (eeprom->len == 0) |
| 666 |
return -EINVAL; |
| 667 |
|
| 668 |
if (eeprom->magic != AX_EEPROM_MAGIC) |
| 669 |
return -EINVAL; |
| 670 |
|
| 671 |
first_word = eeprom->offset >> 1; |
| 672 |
last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
| 673 |
|
| 674 |
eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16), |
| 675 |
GFP_KERNEL); |
| 676 |
if (!eeprom_buff) |
| 677 |
return -ENOMEM; |
| 678 |
|
| 679 |
/* align data to 16 bit boundaries, read the missing data from |
| 680 |
the EEPROM */ |
| 681 |
if (eeprom->offset & 1) { |
| 682 |
ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2, |
| 683 |
&eeprom_buff[0], 0); |
| 684 |
if (ret < 0) { |
| 685 |
netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word); |
| 686 |
goto free; |
| 687 |
} |
| 688 |
} |
| 689 |
|
| 690 |
if ((eeprom->offset + eeprom->len) & 1) { |
| 691 |
ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2, |
| 692 |
&eeprom_buff[last_word - first_word], 0); |
| 693 |
if (ret < 0) { |
| 694 |
netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word); |
| 695 |
goto free; |
| 696 |
} |
| 697 |
} |
| 698 |
|
| 699 |
memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len); |
| 700 |
|
| 701 |
/* write data to EEPROM */ |
| 702 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0); |
| 703 |
if (ret < 0) { |
| 704 |
netdev_err(net, "Failed to enable EEPROM write\n"); |
| 705 |
goto free; |
| 706 |
} |
| 707 |
msleep(20); |
| 708 |
|
| 709 |
for (i = first_word; i <= last_word; i++) { |
| 710 |
netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n", |
| 711 |
i, eeprom_buff[i - first_word]); |
| 712 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i, |
| 713 |
eeprom_buff[i - first_word], 0, NULL, 0); |
| 714 |
if (ret < 0) { |
| 715 |
netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", |
| 716 |
i); |
| 717 |
goto free; |
| 718 |
} |
| 719 |
msleep(20); |
| 720 |
} |
| 721 |
|
| 722 |
ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0); |
| 723 |
if (ret < 0) { |
| 724 |
netdev_err(net, "Failed to disable EEPROM write\n"); |
| 725 |
goto free; |
| 726 |
} |
| 727 |
|
| 728 |
ret = 0; |
| 729 |
free: |
| 730 |
kfree(eeprom_buff); |
| 731 |
return ret; |
| 732 |
} |
| 733 |
|
| 734 |
int asix_set_mac_address(struct net_device *net, void *p) |
| 735 |
{ |
| 736 |
struct usbnet *dev = netdev_priv(net); |
| 737 |
struct asix_data *data = (struct asix_data *)&dev->data; |
| 738 |
struct sockaddr *addr = p; |
| 739 |
|
| 740 |
if (netif_running(net)) |
| 741 |
return -EBUSY; |
| 742 |
if (!is_valid_ether_addr(addr->sa_data)) |
| 743 |
return -EADDRNOTAVAIL; |
| 744 |
|
| 745 |
eth_hw_addr_set(net, addr->sa_data); |
| 746 |
|
| 747 |
/* We use the 20 byte dev->data |
| 748 |
* for our 6 byte mac buffer |
| 749 |
* to avoid allocating memory that |
| 750 |
* is tricky to free later */ |
| 751 |
memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); |
| 752 |
asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, |
| 753 |
data->mac_addr); |
| 754 |
|
| 755 |
return 0; |
| 756 |
} |