Debian Codegraph @

drivers/net/usb/mcs7830.c

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
4 *
5 * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
6 *
7 * Copyright (C) 2010 Andreas Mohr <[email protected]>
8 * Copyright (C) 2006 Arnd Bergmann <[email protected]>
9 * Copyright (C) 2003-2005 David Hollis <[email protected]>
10 * Copyright (C) 2005 Phil Chang <[email protected]>
11 * Copyright (c) 2002-2003 TiVo Inc.
12 *
13 * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
14 *
15 * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
16 * per active notification by manufacturer
17 *
18 * TODO:
19 * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
20 * - implement ethtool_ops get_pauseparam/set_pauseparam
21 * via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
22 * - implement get_eeprom/[set_eeprom]
23 * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
24 * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
25 * can access only ~ 24, remaining user buffer is uninitialized garbage
26 * - anything else?
27 */
28
29 #include <linux/crc32.h>
30 #include <linux/etherdevice.h>
31 #include <linux/ethtool.h>
32 #include <linux/mii.h>
33 #include <linux/module.h>
34 #include <linux/netdevice.h>
35 #include <linux/slab.h>
36 #include <linux/usb.h>
37 #include <linux/usb/usbnet.h>
38
39 /* requests */
40 #define MCS7830_RD_BMREQ (USB_DIR_IN | USB_TYPE_VENDOR | \
41 USB_RECIP_DEVICE)
42 #define MCS7830_WR_BMREQ (USB_DIR_OUT | USB_TYPE_VENDOR | \
43 USB_RECIP_DEVICE)
44 #define MCS7830_RD_BREQ 0x0E
45 #define MCS7830_WR_BREQ 0x0D
46
47 #define MCS7830_CTRL_TIMEOUT 1000
48 #define MCS7830_MAX_MCAST 64
49
50 #define MCS7830_VENDOR_ID 0x9710
51 #define MCS7832_PRODUCT_ID 0x7832
52 #define MCS7830_PRODUCT_ID 0x7830
53 #define MCS7730_PRODUCT_ID 0x7730
54
55 #define SITECOM_VENDOR_ID 0x0DF6
56 #define LN_030_PRODUCT_ID 0x0021
57
58 #define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
59 ADVERTISE_100HALF | ADVERTISE_10FULL | \
60 ADVERTISE_10HALF | ADVERTISE_CSMA)
61
62 /* HIF_REG_XX corresponding index value */
63 enum {
64 HIF_REG_MULTICAST_HASH = 0x00,
65 HIF_REG_PACKET_GAP1 = 0x08,
66 HIF_REG_PACKET_GAP2 = 0x09,
67 HIF_REG_PHY_DATA = 0x0a,
68 HIF_REG_PHY_CMD1 = 0x0c,
69 HIF_REG_PHY_CMD1_READ = 0x40,
70 HIF_REG_PHY_CMD1_WRITE = 0x20,
71 HIF_REG_PHY_CMD1_PHYADDR = 0x01,
72 HIF_REG_PHY_CMD2 = 0x0d,
73 HIF_REG_PHY_CMD2_PEND_FLAG_BIT = 0x80,
74 HIF_REG_PHY_CMD2_READY_FLAG_BIT = 0x40,
75 HIF_REG_CONFIG = 0x0e,
76 /* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
77 HIF_REG_CONFIG_CFG = 0x80,
78 HIF_REG_CONFIG_SPEED100 = 0x40,
79 HIF_REG_CONFIG_FULLDUPLEX_ENABLE = 0x20,
80 HIF_REG_CONFIG_RXENABLE = 0x10,
81 HIF_REG_CONFIG_TXENABLE = 0x08,
82 HIF_REG_CONFIG_SLEEPMODE = 0x04,
83 HIF_REG_CONFIG_ALLMULTICAST = 0x02,
84 HIF_REG_CONFIG_PROMISCUOUS = 0x01,
85 HIF_REG_ETHERNET_ADDR = 0x0f,
86 HIF_REG_FRAME_DROP_COUNTER = 0x15, /* 0..ff; reset: 0 */
87 HIF_REG_PAUSE_THRESHOLD = 0x16,
88 HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0,
89 };
90
91 /* Trailing status byte in Ethernet Rx frame */
92 enum {
93 MCS7830_RX_SHORT_FRAME = 0x01, /* < 64 bytes */
94 MCS7830_RX_LENGTH_ERROR = 0x02, /* framelen != Ethernet length field */
95 MCS7830_RX_ALIGNMENT_ERROR = 0x04, /* non-even number of nibbles */
96 MCS7830_RX_CRC_ERROR = 0x08,
97 MCS7830_RX_LARGE_FRAME = 0x10, /* > 1518 bytes */
98 MCS7830_RX_FRAME_CORRECT = 0x20, /* frame is correct */
99 /* [7:6] reserved */
100 };
101
102 struct mcs7830_data {
103 u8 multi_filter[8];
104 u8 config;
105 };
106
107 static const char driver_name[] = "MOSCHIP usb-ethernet driver";
108
109 static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
110 {
111 int ret;
112
113 ret = usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
114 0x0000, index, data, size);
115 if (ret < 0)
116 return ret;
117 else if (ret < size)
118 return -ENODATA;
119
120 return ret;
121 }
122
123 static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
124 {
125 return usbnet_write_cmd(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
126 0x0000, index, data, size);
127 }
128
129 static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
130 {
131 usbnet_write_cmd_async(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
132 0x0000, index, data, size);
133 }
134
135 static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
136 {
137 int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
138 if (ret < 0)
139 return ret;
140 return 0;
141 }
142
143 static int mcs7830_hif_set_mac_address(struct usbnet *dev,
144 const unsigned char *addr)
145 {
146 int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
147
148 if (ret < 0)
149 return ret;
150 return 0;
151 }
152
153 static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
154 {
155 int ret;
156 struct usbnet *dev = netdev_priv(netdev);
157 struct sockaddr *addr = p;
158
159 if (netif_running(netdev))
160 return -EBUSY;
161
162 if (!is_valid_ether_addr(addr->sa_data))
163 return -EADDRNOTAVAIL;
164
165 ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
166
167 if (ret < 0)
168 return ret;
169
170 /* it worked --> adopt it on netdev side */
171 eth_hw_addr_set(netdev, addr->sa_data);
172
173 return 0;
174 }
175
176 static int mcs7830_read_phy(struct usbnet *dev, u8 index)
177 {
178 int ret;
179 int i;
180 __le16 val;
181
182 u8 cmd[2] = {
183 HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
184 HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
185 };
186
187 mutex_lock(&dev->phy_mutex);
188 /* write the MII command */
189 ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
190 if (ret < 0)
191 goto out;
192
193 /* wait for the data to become valid, should be within < 1ms */
194 for (i = 0; i < 10; i++) {
195 ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
196 if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
197 break;
198 ret = -EIO;
199 msleep(1);
200 }
201 if (ret < 0)
202 goto out;
203
204 /* read actual register contents */
205 ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
206 if (ret < 0)
207 goto out;
208 ret = le16_to_cpu(val);
209 dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
210 index, val, i);
211 out:
212 mutex_unlock(&dev->phy_mutex);
213 return ret;
214 }
215
216 static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
217 {
218 int ret;
219 int i;
220 __le16 le_val;
221
222 u8 cmd[2] = {
223 HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
224 HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
225 };
226
227 mutex_lock(&dev->phy_mutex);
228
229 /* write the new register contents */
230 le_val = cpu_to_le16(val);
231 ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
232 if (ret < 0)
233 goto out;
234
235 /* write the MII command */
236 ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
237 if (ret < 0)
238 goto out;
239
240 /* wait for the command to be accepted by the PHY */
241 for (i = 0; i < 10; i++) {
242 ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
243 if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
244 break;
245 ret = -EIO;
246 msleep(1);
247 }
248 if (ret < 0)
249 goto out;
250
251 ret = 0;
252 dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
253 index, val, i);
254 out:
255 mutex_unlock(&dev->phy_mutex);
256 return ret;
257 }
258
259 /*
260 * This algorithm comes from the original mcs7830 version 1.4 driver,
261 * not sure if it is needed.
262 */
263 static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
264 {
265 int ret;
266 /* Enable all media types */
267 ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
268
269 /* First reset BMCR */
270 if (!ret)
271 ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
272 /* Enable Auto Neg */
273 if (!ret)
274 ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
275 /* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
276 if (!ret)
277 ret = mcs7830_write_phy(dev, MII_BMCR,
278 BMCR_ANENABLE | BMCR_ANRESTART );
279 return ret;
280 }
281
282
283 /*
284 * if we can read register 22, the chip revision is C or higher
285 */
286 static int mcs7830_get_rev(struct usbnet *dev)
287 {
288 u8 dummy[2];
289 int ret;
290 ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
291 if (ret > 0)
292 return 2; /* Rev C or later */
293 return 1; /* earlier revision */
294 }
295
296 /*
297 * On rev. C we need to set the pause threshold
298 */
299 static void mcs7830_rev_C_fixup(struct usbnet *dev)
300 {
301 u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
302 int retry;
303
304 for (retry = 0; retry < 2; retry++) {
305 if (mcs7830_get_rev(dev) == 2) {
306 dev_info(&dev->udev->dev, "applying rev.C fixup\n");
307 mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
308 1, &pause_threshold);
309 }
310 msleep(1);
311 }
312 }
313
314 static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
315 int location)
316 {
317 struct usbnet *dev = netdev_priv(netdev);
318 return mcs7830_read_phy(dev, location);
319 }
320
321 static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
322 int location, int val)
323 {
324 struct usbnet *dev = netdev_priv(netdev);
325 mcs7830_write_phy(dev, location, val);
326 }
327
328 static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
329 {
330 return (struct mcs7830_data *)&dev->data;
331 }
332
333 static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
334 {
335 struct mcs7830_data *data = mcs7830_get_data(dev);
336 mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
337 sizeof data->multi_filter,
338 data->multi_filter);
339 }
340
341 static void mcs7830_hif_update_config(struct usbnet *dev)
342 {
343 /* implementation specific to data->config
344 (argument needs to be heap-based anyway - USB DMA!) */
345 struct mcs7830_data *data = mcs7830_get_data(dev);
346 mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
347 }
348
349 static void mcs7830_data_set_multicast(struct net_device *net)
350 {
351 struct usbnet *dev = netdev_priv(net);
352 struct mcs7830_data *data = mcs7830_get_data(dev);
353
354 memset(data->multi_filter, 0, sizeof data->multi_filter);
355
356 data->config = HIF_REG_CONFIG_TXENABLE;
357
358 /* this should not be needed, but it doesn't work otherwise */
359 data->config |= HIF_REG_CONFIG_ALLMULTICAST;
360
361 if (net->flags & IFF_PROMISC) {
362 data->config |= HIF_REG_CONFIG_PROMISCUOUS;
363 } else if (net->flags & IFF_ALLMULTI ||
364 netdev_mc_count(net) > MCS7830_MAX_MCAST) {
365 data->config |= HIF_REG_CONFIG_ALLMULTICAST;
366 } else if (netdev_mc_empty(net)) {
367 /* just broadcast and directed */
368 } else {
369 /* We use the 20 byte dev->data
370 * for our 8 byte filter buffer
371 * to avoid allocating memory that
372 * is tricky to free later */
373 struct netdev_hw_addr *ha;
374 u32 crc_bits;
375
376 /* Build the multicast hash filter. */
377 netdev_for_each_mc_addr(ha, net) {
378 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
379 data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
380 }
381 }
382 }
383
384 static int mcs7830_apply_base_config(struct usbnet *dev)
385 {
386 int ret;
387
388 /* re-configure known MAC (suspend case etc.) */
389 ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
390 if (ret) {
391 dev_info(&dev->udev->dev, "Cannot set MAC address\n");
392 goto out;
393 }
394
395 /* Set up PHY */
396 ret = mcs7830_set_autoneg(dev, 0);
397 if (ret) {
398 dev_info(&dev->udev->dev, "Cannot set autoneg\n");
399 goto out;
400 }
401
402 mcs7830_hif_update_multicast_hash(dev);
403 mcs7830_hif_update_config(dev);
404
405 mcs7830_rev_C_fixup(dev);
406 ret = 0;
407 out:
408 return ret;
409 }
410
411 /* credits go to asix_set_multicast */
412 static void mcs7830_set_multicast(struct net_device *net)
413 {
414 struct usbnet *dev = netdev_priv(net);
415
416 mcs7830_data_set_multicast(net);
417
418 mcs7830_hif_update_multicast_hash(dev);
419 mcs7830_hif_update_config(dev);
420 }
421
422 static int mcs7830_get_regs_len(struct net_device *net)
423 {
424 struct usbnet *dev = netdev_priv(net);
425
426 switch (mcs7830_get_rev(dev)) {
427 case 1:
428 return 21;
429 case 2:
430 return 32;
431 }
432 return 0;
433 }
434
435 static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
436 {
437 struct usbnet *dev = netdev_priv(net);
438
439 regs->version = mcs7830_get_rev(dev);
440 mcs7830_get_reg(dev, 0, regs->len, data);
441 }
442
443 static const struct ethtool_ops mcs7830_ethtool_ops = {
444 .get_regs_len = mcs7830_get_regs_len,
445 .get_regs = mcs7830_get_regs,
446
447 /* common usbnet calls */
448 .get_drvinfo = usbnet_get_drvinfo,
449 .get_link = usbnet_get_link,
450 .get_msglevel = usbnet_get_msglevel,
451 .set_msglevel = usbnet_set_msglevel,
452 .nway_reset = usbnet_nway_reset,
453 .get_link_ksettings = usbnet_get_link_ksettings_mii,
454 .set_link_ksettings = usbnet_set_link_ksettings_mii,
455 };
456
457 static const struct net_device_ops mcs7830_netdev_ops = {
458 .ndo_open = usbnet_open,
459 .ndo_stop = usbnet_stop,
460 .ndo_start_xmit = usbnet_start_xmit,
461 .ndo_tx_timeout = usbnet_tx_timeout,
462 .ndo_change_mtu = usbnet_change_mtu,
463 .ndo_get_stats64 = dev_get_tstats64,
464 .ndo_validate_addr = eth_validate_addr,
465 .ndo_eth_ioctl = usbnet_mii_ioctl,
466 .ndo_set_rx_mode = mcs7830_set_multicast,
467 .ndo_set_mac_address = mcs7830_set_mac_address,
468 };
469
470 static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
471 {
472 struct net_device *net = dev->net;
473 u8 addr[ETH_ALEN];
474 int ret;
475 int retry;
476
477 /* Initial startup: Gather MAC address setting from EEPROM */
478 ret = -EINVAL;
479 for (retry = 0; retry < 5 && ret; retry++)
480 ret = mcs7830_hif_get_mac_address(dev, addr);
481 if (ret) {
482 dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
483 goto out;
484 }
485 eth_hw_addr_set(net, addr);
486
487 mcs7830_data_set_multicast(net);
488
489 ret = mcs7830_apply_base_config(dev);
490 if (ret)
491 goto out;
492
493 net->ethtool_ops = &mcs7830_ethtool_ops;
494 net->netdev_ops = &mcs7830_netdev_ops;
495
496 /* reserve space for the status byte on rx */
497 dev->rx_urb_size = ETH_FRAME_LEN + 1;
498
499 dev->mii.mdio_read = mcs7830_mdio_read;
500 dev->mii.mdio_write = mcs7830_mdio_write;
501 dev->mii.dev = net;
502 dev->mii.phy_id_mask = 0x3f;
503 dev->mii.reg_num_mask = 0x1f;
504 dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
505
506 ret = usbnet_get_endpoints(dev, udev);
507 out:
508 return ret;
509 }
510
511 /* The chip always appends a status byte that we need to strip */
512 static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
513 {
514 u8 status;
515
516 /* This check is no longer done by usbnet */
517 if (skb->len < dev->net->hard_header_len) {
518 dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
519 return 0;
520 }
521
522 skb_trim(skb, skb->len - 1);
523 status = skb->data[skb->len];
524
525 if (status != MCS7830_RX_FRAME_CORRECT) {
526 dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
527
528 /* hmm, perhaps usbnet.c already sees a globally visible
529 frame error and increments rx_errors on its own already? */
530 dev->net->stats.rx_errors++;
531
532 if (status & (MCS7830_RX_SHORT_FRAME
533 |MCS7830_RX_LENGTH_ERROR
534 |MCS7830_RX_LARGE_FRAME))
535 dev->net->stats.rx_length_errors++;
536 if (status & MCS7830_RX_ALIGNMENT_ERROR)
537 dev->net->stats.rx_frame_errors++;
538 if (status & MCS7830_RX_CRC_ERROR)
539 dev->net->stats.rx_crc_errors++;
540 }
541
542 return skb->len > 0;
543 }
544
545 static void mcs7830_status(struct usbnet *dev, struct urb *urb)
546 {
547 u8 *buf = urb->transfer_buffer;
548 bool link, link_changed;
549
550 if (urb->actual_length < 16)
551 return;
552
553 link = !(buf[1] == 0x20);
554 link_changed = netif_carrier_ok(dev->net) != link;
555 if (link_changed) {
556 usbnet_link_change(dev, link, 0);
557 netdev_dbg(dev->net, "Link Status is: %d\n", link);
558 }
559 }
560
561 static const struct driver_info moschip_info = {
562 .description = "MOSCHIP 7830/7832/7730 usb-NET adapter",
563 .bind = mcs7830_bind,
564 .rx_fixup = mcs7830_rx_fixup,
565 .flags = FLAG_ETHER | FLAG_LINK_INTR,
566 .status = mcs7830_status,
567 .in = 1,
568 .out = 2,
569 };
570
571 static const struct driver_info sitecom_info = {
572 .description = "Sitecom LN-30 usb-NET adapter",
573 .bind = mcs7830_bind,
574 .rx_fixup = mcs7830_rx_fixup,
575 .flags = FLAG_ETHER | FLAG_LINK_INTR,
576 .status = mcs7830_status,
577 .in = 1,
578 .out = 2,
579 };
580
581 static const struct usb_device_id products[] = {
582 {
583 USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
584 .driver_info = (unsigned long) &moschip_info,
585 },
586 {
587 USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
588 .driver_info = (unsigned long) &moschip_info,
589 },
590 {
591 USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
592 .driver_info = (unsigned long) &moschip_info,
593 },
594 {
595 USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
596 .driver_info = (unsigned long) &sitecom_info,
597 },
598 {},
599 };
600 MODULE_DEVICE_TABLE(usb, products);
601
602 static int mcs7830_reset_resume (struct usb_interface *intf)
603 {
604 /* YES, this function is successful enough that ethtool -d
605 does show same output pre-/post-suspend */
606
607 struct usbnet *dev = usb_get_intfdata(intf);
608
609 mcs7830_apply_base_config(dev);
610
611 usbnet_resume(intf);
612
613 return 0;
614 }
615
616 static struct usb_driver mcs7830_driver = {
617 .name = driver_name,
618 .id_table = products,
619 .probe = usbnet_probe,
620 .disconnect = usbnet_disconnect,
621 .suspend = usbnet_suspend,
622 .resume = usbnet_resume,
623 .reset_resume = mcs7830_reset_resume,
624 .disable_hub_initiated_lpm = 1,
625 };
626
627 module_usb_driver(mcs7830_driver);
628
629 MODULE_DESCRIPTION("USB to network adapter MCS7830)");
630 MODULE_LICENSE("GPL");