| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* CDC Ethernet based networking peripherals |
| 4 |
* Copyright (C) 2003-2005 by David Brownell |
| 5 |
* Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) |
| 6 |
*/ |
| 7 |
|
| 8 |
// #define DEBUG // error path messages, extra info |
| 9 |
// #define VERBOSE // more; success messages |
| 10 |
|
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/netdevice.h> |
| 13 |
#include <linux/etherdevice.h> |
| 14 |
#include <linux/ethtool.h> |
| 15 |
#include <linux/workqueue.h> |
| 16 |
#include <linux/mii.h> |
| 17 |
#include <linux/usb.h> |
| 18 |
#include <linux/usb/cdc.h> |
| 19 |
#include <linux/usb/usbnet.h> |
| 20 |
|
| 21 |
|
| 22 |
#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST) |
| 23 |
|
| 24 |
static int is_rndis(struct usb_interface_descriptor *desc) |
| 25 |
{ |
| 26 |
return (desc->bInterfaceClass == USB_CLASS_COMM && |
| 27 |
desc->bInterfaceSubClass == 2 && |
| 28 |
desc->bInterfaceProtocol == 0xff); |
| 29 |
} |
| 30 |
|
| 31 |
static int is_activesync(struct usb_interface_descriptor *desc) |
| 32 |
{ |
| 33 |
return (desc->bInterfaceClass == USB_CLASS_MISC && |
| 34 |
desc->bInterfaceSubClass == 1 && |
| 35 |
desc->bInterfaceProtocol == 1); |
| 36 |
} |
| 37 |
|
| 38 |
static int is_wireless_rndis(struct usb_interface_descriptor *desc) |
| 39 |
{ |
| 40 |
return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER && |
| 41 |
desc->bInterfaceSubClass == 1 && |
| 42 |
desc->bInterfaceProtocol == 3); |
| 43 |
} |
| 44 |
|
| 45 |
static int is_novatel_rndis(struct usb_interface_descriptor *desc) |
| 46 |
{ |
| 47 |
return (desc->bInterfaceClass == USB_CLASS_MISC && |
| 48 |
desc->bInterfaceSubClass == 4 && |
| 49 |
desc->bInterfaceProtocol == 1); |
| 50 |
} |
| 51 |
|
| 52 |
#else |
| 53 |
|
| 54 |
#define is_rndis(desc) 0 |
| 55 |
#define is_activesync(desc) 0 |
| 56 |
#define is_wireless_rndis(desc) 0 |
| 57 |
#define is_novatel_rndis(desc) 0 |
| 58 |
|
| 59 |
#endif |
| 60 |
|
| 61 |
static const u8 mbm_guid[16] = { |
| 62 |
0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01, |
| 63 |
0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a, |
| 64 |
}; |
| 65 |
|
| 66 |
void usbnet_cdc_update_filter(struct usbnet *dev) |
| 67 |
{ |
| 68 |
struct net_device *net = dev->net; |
| 69 |
|
| 70 |
u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED |
| 71 |
| USB_CDC_PACKET_TYPE_BROADCAST; |
| 72 |
|
| 73 |
/* filtering on the device is an optional feature and not worth |
| 74 |
* the hassle so we just roughly care about snooping and if any |
| 75 |
* multicast is requested, we take every multicast |
| 76 |
*/ |
| 77 |
if (net->flags & IFF_PROMISC) |
| 78 |
cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS; |
| 79 |
if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) |
| 80 |
cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST; |
| 81 |
|
| 82 |
usb_control_msg(dev->udev, |
| 83 |
usb_sndctrlpipe(dev->udev, 0), |
| 84 |
USB_CDC_SET_ETHERNET_PACKET_FILTER, |
| 85 |
USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 86 |
cdc_filter, |
| 87 |
dev->intf->cur_altsetting->desc.bInterfaceNumber, |
| 88 |
NULL, |
| 89 |
0, |
| 90 |
USB_CTRL_SET_TIMEOUT |
| 91 |
); |
| 92 |
} |
| 93 |
EXPORT_SYMBOL_GPL(usbnet_cdc_update_filter); |
| 94 |
|
| 95 |
/* We need to override usbnet_*_link_ksettings in bind() */ |
| 96 |
static const struct ethtool_ops cdc_ether_ethtool_ops = { |
| 97 |
.get_link = usbnet_get_link, |
| 98 |
.nway_reset = usbnet_nway_reset, |
| 99 |
.get_drvinfo = usbnet_get_drvinfo, |
| 100 |
.get_msglevel = usbnet_get_msglevel, |
| 101 |
.set_msglevel = usbnet_set_msglevel, |
| 102 |
.get_ts_info = ethtool_op_get_ts_info, |
| 103 |
.get_link_ksettings = usbnet_get_link_ksettings_internal, |
| 104 |
.set_link_ksettings = NULL, |
| 105 |
}; |
| 106 |
|
| 107 |
/* probes control interface, claims data interface, collects the bulk |
| 108 |
* endpoints, activates data interface (if needed), maybe sets MTU. |
| 109 |
* all pure cdc, except for certain firmware workarounds, and knowing |
| 110 |
* that rndis uses one different rule. |
| 111 |
*/ |
| 112 |
int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) |
| 113 |
{ |
| 114 |
u8 *buf = intf->cur_altsetting->extra; |
| 115 |
int len = intf->cur_altsetting->extralen; |
| 116 |
struct usb_interface_descriptor *d; |
| 117 |
struct cdc_state *info = (void *) &dev->data; |
| 118 |
int status; |
| 119 |
int rndis; |
| 120 |
bool android_rndis_quirk = false; |
| 121 |
struct usb_driver *driver = driver_of(intf); |
| 122 |
struct usb_cdc_parsed_header header; |
| 123 |
|
| 124 |
if (sizeof(dev->data) < sizeof(*info)) |
| 125 |
return -EDOM; |
| 126 |
|
| 127 |
/* expect strict spec conformance for the descriptors, but |
| 128 |
* cope with firmware which stores them in the wrong place |
| 129 |
*/ |
| 130 |
if (len == 0 && dev->udev->actconfig->extralen) { |
| 131 |
/* Motorola SB4100 (and others: Brad Hards says it's |
| 132 |
* from a Broadcom design) put CDC descriptors here |
| 133 |
*/ |
| 134 |
buf = dev->udev->actconfig->extra; |
| 135 |
len = dev->udev->actconfig->extralen; |
| 136 |
dev_dbg(&intf->dev, "CDC descriptors on config\n"); |
| 137 |
} |
| 138 |
|
| 139 |
/* Maybe CDC descriptors are after the endpoint? This bug has |
| 140 |
* been seen on some 2Wire Inc RNDIS-ish products. |
| 141 |
*/ |
| 142 |
if (len == 0) { |
| 143 |
struct usb_host_endpoint *hep; |
| 144 |
|
| 145 |
hep = intf->cur_altsetting->endpoint; |
| 146 |
if (hep) { |
| 147 |
buf = hep->extra; |
| 148 |
len = hep->extralen; |
| 149 |
} |
| 150 |
if (len) |
| 151 |
dev_dbg(&intf->dev, |
| 152 |
"CDC descriptors on endpoint\n"); |
| 153 |
} |
| 154 |
|
| 155 |
/* this assumes that if there's a non-RNDIS vendor variant |
| 156 |
* of cdc-acm, it'll fail RNDIS requests cleanly. |
| 157 |
*/ |
| 158 |
rndis = (is_rndis(&intf->cur_altsetting->desc) || |
| 159 |
is_activesync(&intf->cur_altsetting->desc) || |
| 160 |
is_wireless_rndis(&intf->cur_altsetting->desc) || |
| 161 |
is_novatel_rndis(&intf->cur_altsetting->desc)); |
| 162 |
|
| 163 |
memset(info, 0, sizeof(*info)); |
| 164 |
info->control = intf; |
| 165 |
|
| 166 |
cdc_parse_cdc_header(&header, intf, buf, len); |
| 167 |
|
| 168 |
info->u = header.usb_cdc_union_desc; |
| 169 |
info->header = header.usb_cdc_header_desc; |
| 170 |
info->ether = header.usb_cdc_ether_desc; |
| 171 |
if (!info->u) { |
| 172 |
if (rndis) |
| 173 |
goto skip; |
| 174 |
else /* in that case a quirk is mandatory */ |
| 175 |
goto bad_desc; |
| 176 |
} |
| 177 |
/* we need a master/control interface (what we're |
| 178 |
* probed with) and a slave/data interface; union |
| 179 |
* descriptors sort this all out. |
| 180 |
*/ |
| 181 |
info->control = usb_ifnum_to_if(dev->udev, info->u->bMasterInterface0); |
| 182 |
info->data = usb_ifnum_to_if(dev->udev, info->u->bSlaveInterface0); |
| 183 |
if (!info->control || !info->data) { |
| 184 |
dev_dbg(&intf->dev, |
| 185 |
"master #%u/%p slave #%u/%p\n", |
| 186 |
info->u->bMasterInterface0, |
| 187 |
info->control, |
| 188 |
info->u->bSlaveInterface0, |
| 189 |
info->data); |
| 190 |
/* fall back to hard-wiring for RNDIS */ |
| 191 |
if (rndis) { |
| 192 |
android_rndis_quirk = true; |
| 193 |
goto skip; |
| 194 |
} |
| 195 |
goto bad_desc; |
| 196 |
} |
| 197 |
if (info->control != intf) { |
| 198 |
dev_dbg(&intf->dev, "bogus CDC Union\n"); |
| 199 |
/* Ambit USB Cable Modem (and maybe others) |
| 200 |
* interchanges master and slave interface. |
| 201 |
*/ |
| 202 |
if (info->data == intf) { |
| 203 |
info->data = info->control; |
| 204 |
info->control = intf; |
| 205 |
} else |
| 206 |
goto bad_desc; |
| 207 |
} |
| 208 |
|
| 209 |
/* some devices merge these - skip class check */ |
| 210 |
if (info->control == info->data) |
| 211 |
goto skip; |
| 212 |
|
| 213 |
/* a data interface altsetting does the real i/o */ |
| 214 |
d = &info->data->cur_altsetting->desc; |
| 215 |
if (d->bInterfaceClass != USB_CLASS_CDC_DATA) { |
| 216 |
dev_dbg(&intf->dev, "slave class %u\n", d->bInterfaceClass); |
| 217 |
goto bad_desc; |
| 218 |
} |
| 219 |
skip: |
| 220 |
/* Communication class functions with bmCapabilities are not |
| 221 |
* RNDIS. But some Wireless class RNDIS functions use |
| 222 |
* bmCapabilities for their own purpose. The failsafe is |
| 223 |
* therefore applied only to Communication class RNDIS |
| 224 |
* functions. The rndis test is redundant, but a cheap |
| 225 |
* optimization. |
| 226 |
*/ |
| 227 |
if (rndis && is_rndis(&intf->cur_altsetting->desc) && |
| 228 |
header.usb_cdc_acm_descriptor && |
| 229 |
header.usb_cdc_acm_descriptor->bmCapabilities) { |
| 230 |
dev_dbg(&intf->dev, |
| 231 |
"ACM capabilities %02x, not really RNDIS?\n", |
| 232 |
header.usb_cdc_acm_descriptor->bmCapabilities); |
| 233 |
goto bad_desc; |
| 234 |
} |
| 235 |
|
| 236 |
if (header.usb_cdc_ether_desc && info->ether->wMaxSegmentSize) { |
| 237 |
dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize); |
| 238 |
/* because of Zaurus, we may be ignoring the host |
| 239 |
* side link address we were given. |
| 240 |
*/ |
| 241 |
} |
| 242 |
|
| 243 |
if (header.usb_cdc_mdlm_desc && |
| 244 |
memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) { |
| 245 |
dev_dbg(&intf->dev, "GUID doesn't match\n"); |
| 246 |
goto bad_desc; |
| 247 |
} |
| 248 |
|
| 249 |
if (header.usb_cdc_mdlm_detail_desc && |
| 250 |
header.usb_cdc_mdlm_detail_desc->bLength < |
| 251 |
(sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) { |
| 252 |
dev_dbg(&intf->dev, "Descriptor too short\n"); |
| 253 |
goto bad_desc; |
| 254 |
} |
| 255 |
|
| 256 |
|
| 257 |
|
| 258 |
/* Microsoft ActiveSync based and some regular RNDIS devices lack the |
| 259 |
* CDC descriptors, so we'll hard-wire the interfaces and not check |
| 260 |
* for descriptors. |
| 261 |
* |
| 262 |
* Some Android RNDIS devices have a CDC Union descriptor pointing |
| 263 |
* to non-existing interfaces. Ignore that and attempt the same |
| 264 |
* hard-wired 0 and 1 interfaces. |
| 265 |
*/ |
| 266 |
if (rndis && (!info->u || android_rndis_quirk)) { |
| 267 |
info->control = usb_ifnum_to_if(dev->udev, 0); |
| 268 |
info->data = usb_ifnum_to_if(dev->udev, 1); |
| 269 |
if (!info->control || !info->data || info->control != intf) { |
| 270 |
dev_dbg(&intf->dev, |
| 271 |
"rndis: master #0/%p slave #1/%p\n", |
| 272 |
info->control, |
| 273 |
info->data); |
| 274 |
goto bad_desc; |
| 275 |
} |
| 276 |
|
| 277 |
} else if (!info->header || (!rndis && !info->ether)) { |
| 278 |
dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n", |
| 279 |
info->header ? "" : "header ", |
| 280 |
info->u ? "" : "union ", |
| 281 |
info->ether ? "" : "ether "); |
| 282 |
goto bad_desc; |
| 283 |
} |
| 284 |
|
| 285 |
/* claim data interface and set it up ... with side effects. |
| 286 |
* network traffic can't flow until an altsetting is enabled. |
| 287 |
*/ |
| 288 |
if (info->data != info->control) { |
| 289 |
status = usb_driver_claim_interface(driver, info->data, dev); |
| 290 |
if (status < 0) |
| 291 |
return status; |
| 292 |
} |
| 293 |
status = usbnet_get_endpoints(dev, info->data); |
| 294 |
if (status < 0) { |
| 295 |
/* ensure immediate exit from usbnet_disconnect */ |
| 296 |
usb_set_intfdata(info->data, NULL); |
| 297 |
if (info->data != info->control) |
| 298 |
usb_driver_release_interface(driver, info->data); |
| 299 |
return status; |
| 300 |
} |
| 301 |
|
| 302 |
/* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */ |
| 303 |
if (info->data != info->control) |
| 304 |
dev->status = NULL; |
| 305 |
if (info->control->cur_altsetting->desc.bNumEndpoints == 1) { |
| 306 |
struct usb_endpoint_descriptor *desc; |
| 307 |
|
| 308 |
dev->status = &info->control->cur_altsetting->endpoint[0]; |
| 309 |
desc = &dev->status->desc; |
| 310 |
if (!usb_endpoint_is_int_in(desc) || |
| 311 |
(le16_to_cpu(desc->wMaxPacketSize) |
| 312 |
< sizeof(struct usb_cdc_notification)) || |
| 313 |
!desc->bInterval) { |
| 314 |
dev_dbg(&intf->dev, "bad notification endpoint\n"); |
| 315 |
dev->status = NULL; |
| 316 |
} |
| 317 |
} |
| 318 |
if (rndis && !dev->status) { |
| 319 |
dev_dbg(&intf->dev, "missing RNDIS status endpoint\n"); |
| 320 |
usb_set_intfdata(info->data, NULL); |
| 321 |
usb_driver_release_interface(driver, info->data); |
| 322 |
return -ENODEV; |
| 323 |
} |
| 324 |
|
| 325 |
/* override ethtool_ops */ |
| 326 |
dev->net->ethtool_ops = &cdc_ether_ethtool_ops; |
| 327 |
|
| 328 |
return 0; |
| 329 |
|
| 330 |
bad_desc: |
| 331 |
dev_info(&dev->udev->dev, "bad CDC descriptors\n"); |
| 332 |
return -ENODEV; |
| 333 |
} |
| 334 |
EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind); |
| 335 |
|
| 336 |
|
| 337 |
/* like usbnet_generic_cdc_bind() but handles filter initialization |
| 338 |
* correctly |
| 339 |
*/ |
| 340 |
int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf) |
| 341 |
{ |
| 342 |
int rv; |
| 343 |
|
| 344 |
rv = usbnet_generic_cdc_bind(dev, intf); |
| 345 |
if (rv < 0) |
| 346 |
goto bail_out; |
| 347 |
|
| 348 |
/* Some devices don't initialise properly. In particular |
| 349 |
* the packet filter is not reset. There are devices that |
| 350 |
* don't do reset all the way. So the packet filter should |
| 351 |
* be set to a sane initial value. |
| 352 |
*/ |
| 353 |
usbnet_cdc_update_filter(dev); |
| 354 |
|
| 355 |
bail_out: |
| 356 |
return rv; |
| 357 |
} |
| 358 |
EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind); |
| 359 |
|
| 360 |
void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf) |
| 361 |
{ |
| 362 |
struct cdc_state *info = (void *) &dev->data; |
| 363 |
struct usb_driver *driver = driver_of(intf); |
| 364 |
|
| 365 |
/* combined interface - nothing to do */ |
| 366 |
if (info->data == info->control) |
| 367 |
return; |
| 368 |
|
| 369 |
/* disconnect master --> disconnect slave */ |
| 370 |
if (intf == info->control && info->data) { |
| 371 |
/* ensure immediate exit from usbnet_disconnect */ |
| 372 |
usb_set_intfdata(info->data, NULL); |
| 373 |
usb_driver_release_interface(driver, info->data); |
| 374 |
info->data = NULL; |
| 375 |
} |
| 376 |
|
| 377 |
/* and vice versa (just in case) */ |
| 378 |
else if (intf == info->data && info->control) { |
| 379 |
/* ensure immediate exit from usbnet_disconnect */ |
| 380 |
usb_set_intfdata(info->control, NULL); |
| 381 |
usb_driver_release_interface(driver, info->control); |
| 382 |
info->control = NULL; |
| 383 |
} |
| 384 |
} |
| 385 |
EXPORT_SYMBOL_GPL(usbnet_cdc_unbind); |
| 386 |
|
| 387 |
/* Communications Device Class, Ethernet Control model |
| 388 |
* |
| 389 |
* Takes two interfaces. The DATA interface is inactive till an altsetting |
| 390 |
* is selected. Configuration data includes class descriptors. There's |
| 391 |
* an optional status endpoint on the control interface. |
| 392 |
* |
| 393 |
* This should interop with whatever the 2.4 "CDCEther.c" driver |
| 394 |
* (by Brad Hards) talked with, with more functionality. |
| 395 |
*/ |
| 396 |
|
| 397 |
static void speed_change(struct usbnet *dev, __le32 *speeds) |
| 398 |
{ |
| 399 |
dev->tx_speed = __le32_to_cpu(speeds[0]); |
| 400 |
dev->rx_speed = __le32_to_cpu(speeds[1]); |
| 401 |
} |
| 402 |
|
| 403 |
void usbnet_cdc_status(struct usbnet *dev, struct urb *urb) |
| 404 |
{ |
| 405 |
struct usb_cdc_notification *event; |
| 406 |
|
| 407 |
if (urb->actual_length < sizeof(*event)) |
| 408 |
return; |
| 409 |
|
| 410 |
/* SPEED_CHANGE can get split into two 8-byte packets */ |
| 411 |
if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) { |
| 412 |
speed_change(dev, (__le32 *) urb->transfer_buffer); |
| 413 |
return; |
| 414 |
} |
| 415 |
|
| 416 |
event = urb->transfer_buffer; |
| 417 |
switch (event->bNotificationType) { |
| 418 |
case USB_CDC_NOTIFY_NETWORK_CONNECTION: |
| 419 |
netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", |
| 420 |
event->wValue ? "on" : "off"); |
| 421 |
if (netif_carrier_ok(dev->net) != !!event->wValue) |
| 422 |
usbnet_link_change(dev, !!event->wValue, 0); |
| 423 |
break; |
| 424 |
case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */ |
| 425 |
netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n", |
| 426 |
urb->actual_length); |
| 427 |
if (urb->actual_length != (sizeof(*event) + 8)) |
| 428 |
set_bit(EVENT_STS_SPLIT, &dev->flags); |
| 429 |
else |
| 430 |
speed_change(dev, (__le32 *) &event[1]); |
| 431 |
break; |
| 432 |
/* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS), |
| 433 |
* but there are no standard formats for the response data. |
| 434 |
*/ |
| 435 |
default: |
| 436 |
netdev_err(dev->net, "CDC: unexpected notification %02x!\n", |
| 437 |
event->bNotificationType); |
| 438 |
break; |
| 439 |
} |
| 440 |
} |
| 441 |
EXPORT_SYMBOL_GPL(usbnet_cdc_status); |
| 442 |
|
| 443 |
int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf) |
| 444 |
{ |
| 445 |
int status; |
| 446 |
struct cdc_state *info = (void *) &dev->data; |
| 447 |
|
| 448 |
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) |
| 449 |
< sizeof(struct cdc_state))); |
| 450 |
|
| 451 |
status = usbnet_ether_cdc_bind(dev, intf); |
| 452 |
if (status < 0) |
| 453 |
return status; |
| 454 |
|
| 455 |
status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress); |
| 456 |
if (status < 0) { |
| 457 |
usb_set_intfdata(info->data, NULL); |
| 458 |
usb_driver_release_interface(driver_of(intf), info->data); |
| 459 |
return status; |
| 460 |
} |
| 461 |
|
| 462 |
return 0; |
| 463 |
} |
| 464 |
EXPORT_SYMBOL_GPL(usbnet_cdc_bind); |
| 465 |
|
| 466 |
static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf) |
| 467 |
{ |
| 468 |
int status = usbnet_cdc_bind(dev, intf); |
| 469 |
|
| 470 |
if (!status && (dev->net->dev_addr[0] & 0x02)) |
| 471 |
eth_hw_addr_random(dev->net); |
| 472 |
|
| 473 |
return status; |
| 474 |
} |
| 475 |
|
| 476 |
/* Make sure packets have correct destination MAC address |
| 477 |
* |
| 478 |
* A firmware bug observed on some devices (ZTE MF823/831/910) is that the |
| 479 |
* device sends packets with a static, bogus, random MAC address (event if |
| 480 |
* device MAC address has been updated). Always set MAC address to that of the |
| 481 |
* device. |
| 482 |
*/ |
| 483 |
int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| 484 |
{ |
| 485 |
if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02)) |
| 486 |
return 1; |
| 487 |
|
| 488 |
skb_reset_mac_header(skb); |
| 489 |
ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr); |
| 490 |
|
| 491 |
return 1; |
| 492 |
} |
| 493 |
EXPORT_SYMBOL_GPL(usbnet_cdc_zte_rx_fixup); |
| 494 |
|
| 495 |
/* Ensure correct link state |
| 496 |
* |
| 497 |
* Some devices (ZTE MF823/831/910) export two carrier on notifications when |
| 498 |
* connected. This causes the link state to be incorrect. Work around this by |
| 499 |
* always setting the state to off, then on. |
| 500 |
*/ |
| 501 |
static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb) |
| 502 |
{ |
| 503 |
struct usb_cdc_notification *event; |
| 504 |
|
| 505 |
if (urb->actual_length < sizeof(*event)) |
| 506 |
return; |
| 507 |
|
| 508 |
event = urb->transfer_buffer; |
| 509 |
|
| 510 |
if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) { |
| 511 |
usbnet_cdc_status(dev, urb); |
| 512 |
return; |
| 513 |
} |
| 514 |
|
| 515 |
netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n", |
| 516 |
event->wValue ? "on" : "off"); |
| 517 |
|
| 518 |
if (event->wValue && |
| 519 |
netif_carrier_ok(dev->net)) |
| 520 |
netif_carrier_off(dev->net); |
| 521 |
|
| 522 |
usbnet_link_change(dev, !!event->wValue, 0); |
| 523 |
} |
| 524 |
|
| 525 |
static const struct driver_info cdc_info = { |
| 526 |
.description = "CDC Ethernet Device", |
| 527 |
.flags = FLAG_ETHER | FLAG_POINTTOPOINT, |
| 528 |
.bind = usbnet_cdc_bind, |
| 529 |
.unbind = usbnet_cdc_unbind, |
| 530 |
.status = usbnet_cdc_status, |
| 531 |
.set_rx_mode = usbnet_cdc_update_filter, |
| 532 |
.manage_power = usbnet_manage_power, |
| 533 |
}; |
| 534 |
|
| 535 |
static const struct driver_info zte_cdc_info = { |
| 536 |
.description = "ZTE CDC Ethernet Device", |
| 537 |
.flags = FLAG_ETHER | FLAG_POINTTOPOINT, |
| 538 |
.bind = usbnet_cdc_zte_bind, |
| 539 |
.unbind = usbnet_cdc_unbind, |
| 540 |
.status = usbnet_cdc_zte_status, |
| 541 |
.set_rx_mode = usbnet_cdc_update_filter, |
| 542 |
.manage_power = usbnet_manage_power, |
| 543 |
.rx_fixup = usbnet_cdc_zte_rx_fixup, |
| 544 |
}; |
| 545 |
|
| 546 |
static const struct driver_info wwan_info = { |
| 547 |
.description = "Mobile Broadband Network Device", |
| 548 |
.flags = FLAG_WWAN, |
| 549 |
.bind = usbnet_cdc_bind, |
| 550 |
.unbind = usbnet_cdc_unbind, |
| 551 |
.status = usbnet_cdc_status, |
| 552 |
.set_rx_mode = usbnet_cdc_update_filter, |
| 553 |
.manage_power = usbnet_manage_power, |
| 554 |
}; |
| 555 |
|
| 556 |
/*-------------------------------------------------------------------------*/ |
| 557 |
|
| 558 |
#define HUAWEI_VENDOR_ID 0x12D1 |
| 559 |
#define NOVATEL_VENDOR_ID 0x1410 |
| 560 |
#define ZTE_VENDOR_ID 0x19D2 |
| 561 |
#define DELL_VENDOR_ID 0x413C |
| 562 |
#define REALTEK_VENDOR_ID 0x0bda |
| 563 |
#define SAMSUNG_VENDOR_ID 0x04e8 |
| 564 |
#define LENOVO_VENDOR_ID 0x17ef |
| 565 |
#define LINKSYS_VENDOR_ID 0x13b1 |
| 566 |
#define NVIDIA_VENDOR_ID 0x0955 |
| 567 |
#define HP_VENDOR_ID 0x03f0 |
| 568 |
#define MICROSOFT_VENDOR_ID 0x045e |
| 569 |
#define UBLOX_VENDOR_ID 0x1546 |
| 570 |
#define TPLINK_VENDOR_ID 0x2357 |
| 571 |
#define AQUANTIA_VENDOR_ID 0x2eca |
| 572 |
#define ASIX_VENDOR_ID 0x0b95 |
| 573 |
|
| 574 |
static const struct usb_device_id products[] = { |
| 575 |
/* BLACKLIST !! |
| 576 |
* |
| 577 |
* First blacklist any products that are egregiously nonconformant |
| 578 |
* with the CDC Ethernet specs. Minor braindamage we cope with; when |
| 579 |
* they're not even trying, needing a separate driver is only the first |
| 580 |
* of the differences to show up. |
| 581 |
*/ |
| 582 |
|
| 583 |
#define ZAURUS_MASTER_INTERFACE \ |
| 584 |
.bInterfaceClass = USB_CLASS_COMM, \ |
| 585 |
.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ |
| 586 |
.bInterfaceProtocol = USB_CDC_PROTO_NONE |
| 587 |
|
| 588 |
#define ZAURUS_FAKE_INTERFACE \ |
| 589 |
.bInterfaceClass = USB_CLASS_COMM, \ |
| 590 |
.bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ |
| 591 |
.bInterfaceProtocol = USB_CDC_PROTO_NONE |
| 592 |
|
| 593 |
/* SA-1100 based Sharp Zaurus ("collie"), or compatible; |
| 594 |
* wire-incompatible with true CDC Ethernet implementations. |
| 595 |
* (And, it seems, needlessly so...) |
| 596 |
*/ |
| 597 |
{ |
| 598 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 599 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 600 |
.idVendor = 0x04DD, |
| 601 |
.idProduct = 0x8004, |
| 602 |
ZAURUS_MASTER_INTERFACE, |
| 603 |
.driver_info = 0, |
| 604 |
}, |
| 605 |
|
| 606 |
/* PXA-25x based Sharp Zaurii. Note that it seems some of these |
| 607 |
* (later models especially) may have shipped only with firmware |
| 608 |
* advertising false "CDC MDLM" compatibility ... but we're not |
| 609 |
* clear which models did that, so for now let's assume the worst. |
| 610 |
*/ |
| 611 |
{ |
| 612 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 613 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 614 |
.idVendor = 0x04DD, |
| 615 |
.idProduct = 0x8005, /* A-300 */ |
| 616 |
ZAURUS_MASTER_INTERFACE, |
| 617 |
.driver_info = 0, |
| 618 |
}, { |
| 619 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 620 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 621 |
.idVendor = 0x04DD, |
| 622 |
.idProduct = 0x8005, /* A-300 */ |
| 623 |
ZAURUS_FAKE_INTERFACE, |
| 624 |
.driver_info = 0, |
| 625 |
}, { |
| 626 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 627 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 628 |
.idVendor = 0x04DD, |
| 629 |
.idProduct = 0x8006, /* B-500/SL-5600 */ |
| 630 |
ZAURUS_MASTER_INTERFACE, |
| 631 |
.driver_info = 0, |
| 632 |
}, { |
| 633 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 634 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 635 |
.idVendor = 0x04DD, |
| 636 |
.idProduct = 0x8006, /* B-500/SL-5600 */ |
| 637 |
ZAURUS_FAKE_INTERFACE, |
| 638 |
.driver_info = 0, |
| 639 |
}, { |
| 640 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 641 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 642 |
.idVendor = 0x04DD, |
| 643 |
.idProduct = 0x8007, /* C-700 */ |
| 644 |
ZAURUS_MASTER_INTERFACE, |
| 645 |
.driver_info = 0, |
| 646 |
}, { |
| 647 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 648 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 649 |
.idVendor = 0x04DD, |
| 650 |
.idProduct = 0x8007, /* C-700 */ |
| 651 |
ZAURUS_FAKE_INTERFACE, |
| 652 |
.driver_info = 0, |
| 653 |
}, { |
| 654 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 655 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 656 |
.idVendor = 0x04DD, |
| 657 |
.idProduct = 0x9031, /* C-750 C-760 */ |
| 658 |
ZAURUS_MASTER_INTERFACE, |
| 659 |
.driver_info = 0, |
| 660 |
}, { |
| 661 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 662 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 663 |
.idVendor = 0x04DD, |
| 664 |
.idProduct = 0x9032, /* SL-6000 */ |
| 665 |
ZAURUS_MASTER_INTERFACE, |
| 666 |
.driver_info = 0, |
| 667 |
}, { |
| 668 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 669 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 670 |
.idVendor = 0x04DD, |
| 671 |
.idProduct = 0x9032, /* SL-6000 */ |
| 672 |
ZAURUS_FAKE_INTERFACE, |
| 673 |
.driver_info = 0, |
| 674 |
}, { |
| 675 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 676 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 677 |
.idVendor = 0x04DD, |
| 678 |
/* reported with some C860 units */ |
| 679 |
.idProduct = 0x9050, /* C-860 */ |
| 680 |
ZAURUS_MASTER_INTERFACE, |
| 681 |
.driver_info = 0, |
| 682 |
}, |
| 683 |
|
| 684 |
/* Olympus has some models with a Zaurus-compatible option. |
| 685 |
* R-1000 uses a FreeScale i.MXL cpu (ARMv4T) |
| 686 |
*/ |
| 687 |
{ |
| 688 |
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| 689 |
| USB_DEVICE_ID_MATCH_DEVICE, |
| 690 |
.idVendor = 0x07B4, |
| 691 |
.idProduct = 0x0F02, /* R-1000 */ |
| 692 |
ZAURUS_MASTER_INTERFACE, |
| 693 |
.driver_info = 0, |
| 694 |
}, |
| 695 |
|
| 696 |
/* LG Electronics VL600 wants additional headers on every frame */ |
| 697 |
{ |
| 698 |
USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM, |
| 699 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 700 |
.driver_info = 0, |
| 701 |
}, |
| 702 |
|
| 703 |
/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ |
| 704 |
{ |
| 705 |
USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, |
| 706 |
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), |
| 707 |
.driver_info = 0, |
| 708 |
}, |
| 709 |
|
| 710 |
/* Novatel USB551L and MC551 - handled by qmi_wwan */ |
| 711 |
{ |
| 712 |
USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM, |
| 713 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 714 |
.driver_info = 0, |
| 715 |
}, |
| 716 |
|
| 717 |
/* Novatel E362 - handled by qmi_wwan */ |
| 718 |
{ |
| 719 |
USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM, |
| 720 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 721 |
.driver_info = 0, |
| 722 |
}, |
| 723 |
|
| 724 |
/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */ |
| 725 |
{ |
| 726 |
USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM, |
| 727 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 728 |
.driver_info = 0, |
| 729 |
}, |
| 730 |
|
| 731 |
/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */ |
| 732 |
{ |
| 733 |
USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM, |
| 734 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 735 |
.driver_info = 0, |
| 736 |
}, |
| 737 |
|
| 738 |
/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */ |
| 739 |
{ |
| 740 |
USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM, |
| 741 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 742 |
.driver_info = 0, |
| 743 |
}, |
| 744 |
|
| 745 |
/* Novatel Expedite E371 - handled by qmi_wwan */ |
| 746 |
{ |
| 747 |
USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM, |
| 748 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 749 |
.driver_info = 0, |
| 750 |
}, |
| 751 |
|
| 752 |
/* HP lt2523 (Novatel E371) - handled by qmi_wwan */ |
| 753 |
{ |
| 754 |
USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM, |
| 755 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 756 |
.driver_info = 0, |
| 757 |
}, |
| 758 |
|
| 759 |
/* AnyDATA ADU960S - handled by qmi_wwan */ |
| 760 |
{ |
| 761 |
USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM, |
| 762 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 763 |
.driver_info = 0, |
| 764 |
}, |
| 765 |
|
| 766 |
/* Huawei E1820 - handled by qmi_wwan */ |
| 767 |
{ |
| 768 |
USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1), |
| 769 |
.driver_info = 0, |
| 770 |
}, |
| 771 |
|
| 772 |
/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */ |
| 773 |
{ |
| 774 |
USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM, |
| 775 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 776 |
.driver_info = 0, |
| 777 |
}, |
| 778 |
|
| 779 |
/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */ |
| 780 |
{ |
| 781 |
USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x721e, USB_CLASS_COMM, |
| 782 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 783 |
.driver_info = 0, |
| 784 |
}, |
| 785 |
|
| 786 |
/* Lenovo ThinkPad Hybrid USB-C with USB-A Dock (40af0135eu, based on Realtek RTL8153) */ |
| 787 |
{ |
| 788 |
USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0xa359, USB_CLASS_COMM, |
| 789 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 790 |
.driver_info = 0, |
| 791 |
}, |
| 792 |
|
| 793 |
/* Aquantia AQtion USB to 5GbE Controller (based on AQC111U) */ |
| 794 |
{ |
| 795 |
USB_DEVICE_AND_INTERFACE_INFO(AQUANTIA_VENDOR_ID, 0xc101, |
| 796 |
USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, |
| 797 |
USB_CDC_PROTO_NONE), |
| 798 |
.driver_info = 0, |
| 799 |
}, |
| 800 |
|
| 801 |
/* ASIX USB 3.1 Gen1 to 5G Multi-Gigabit Ethernet Adapter(based on AQC111U) */ |
| 802 |
{ |
| 803 |
USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2790, USB_CLASS_COMM, |
| 804 |
USB_CDC_SUBCLASS_ETHERNET, |
| 805 |
USB_CDC_PROTO_NONE), |
| 806 |
.driver_info = 0, |
| 807 |
}, |
| 808 |
|
| 809 |
/* ASIX USB 3.1 Gen1 to 2.5G Multi-Gigabit Ethernet Adapter(based on AQC112U) */ |
| 810 |
{ |
| 811 |
USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2791, USB_CLASS_COMM, |
| 812 |
USB_CDC_SUBCLASS_ETHERNET, |
| 813 |
USB_CDC_PROTO_NONE), |
| 814 |
.driver_info = 0, |
| 815 |
}, |
| 816 |
|
| 817 |
/* USB-C 3.1 to 5GBASE-T Ethernet Adapter (based on AQC111U) */ |
| 818 |
{ |
| 819 |
USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0xe05a, USB_CLASS_COMM, |
| 820 |
USB_CDC_SUBCLASS_ETHERNET, |
| 821 |
USB_CDC_PROTO_NONE), |
| 822 |
.driver_info = 0, |
| 823 |
}, |
| 824 |
|
| 825 |
/* QNAP QNA-UC5G1T USB to 5GbE Adapter (based on AQC111U) */ |
| 826 |
{ |
| 827 |
USB_DEVICE_AND_INTERFACE_INFO(0x1c04, 0x0015, USB_CLASS_COMM, |
| 828 |
USB_CDC_SUBCLASS_ETHERNET, |
| 829 |
USB_CDC_PROTO_NONE), |
| 830 |
.driver_info = 0, |
| 831 |
}, |
| 832 |
|
| 833 |
/* WHITELIST!!! |
| 834 |
* |
| 835 |
* CDC Ether uses two interfaces, not necessarily consecutive. |
| 836 |
* We match the main interface, ignoring the optional device |
| 837 |
* class so we could handle devices that aren't exclusively |
| 838 |
* CDC ether. |
| 839 |
* |
| 840 |
* NOTE: this match must come AFTER entries blacklisting devices |
| 841 |
* because of bugs/quirks in a given product (like Zaurus, above). |
| 842 |
*/ |
| 843 |
{ |
| 844 |
/* ZTE (Vodafone) K3805-Z */ |
| 845 |
USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM, |
| 846 |
USB_CDC_SUBCLASS_ETHERNET, |
| 847 |
USB_CDC_PROTO_NONE), |
| 848 |
.driver_info = (unsigned long)&wwan_info, |
| 849 |
}, { |
| 850 |
/* ZTE (Vodafone) K3806-Z */ |
| 851 |
USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM, |
| 852 |
USB_CDC_SUBCLASS_ETHERNET, |
| 853 |
USB_CDC_PROTO_NONE), |
| 854 |
.driver_info = (unsigned long)&wwan_info, |
| 855 |
}, { |
| 856 |
/* ZTE (Vodafone) K4510-Z */ |
| 857 |
USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM, |
| 858 |
USB_CDC_SUBCLASS_ETHERNET, |
| 859 |
USB_CDC_PROTO_NONE), |
| 860 |
.driver_info = (unsigned long)&wwan_info, |
| 861 |
}, { |
| 862 |
/* ZTE (Vodafone) K3770-Z */ |
| 863 |
USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM, |
| 864 |
USB_CDC_SUBCLASS_ETHERNET, |
| 865 |
USB_CDC_PROTO_NONE), |
| 866 |
.driver_info = (unsigned long)&wwan_info, |
| 867 |
}, { |
| 868 |
/* ZTE (Vodafone) K3772-Z */ |
| 869 |
USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM, |
| 870 |
USB_CDC_SUBCLASS_ETHERNET, |
| 871 |
USB_CDC_PROTO_NONE), |
| 872 |
.driver_info = (unsigned long)&wwan_info, |
| 873 |
}, { |
| 874 |
/* Telit modules */ |
| 875 |
USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM, |
| 876 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 877 |
.driver_info = (kernel_ulong_t) &wwan_info, |
| 878 |
}, { |
| 879 |
/* Dell DW5580 modules */ |
| 880 |
USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM, |
| 881 |
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), |
| 882 |
.driver_info = (kernel_ulong_t)&wwan_info, |
| 883 |
}, { |
| 884 |
/* Huawei ME906 and ME909 */ |
| 885 |
USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x15c1, USB_CLASS_COMM, |
| 886 |
USB_CDC_SUBCLASS_ETHERNET, |
| 887 |
USB_CDC_PROTO_NONE), |
| 888 |
.driver_info = (unsigned long)&wwan_info, |
| 889 |
}, { |
| 890 |
/* ZTE modules */ |
| 891 |
USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM, |
| 892 |
USB_CDC_SUBCLASS_ETHERNET, |
| 893 |
USB_CDC_PROTO_NONE), |
| 894 |
.driver_info = (unsigned long)&zte_cdc_info, |
| 895 |
}, { |
| 896 |
/* U-blox TOBY-L2 */ |
| 897 |
USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1143, USB_CLASS_COMM, |
| 898 |
USB_CDC_SUBCLASS_ETHERNET, |
| 899 |
USB_CDC_PROTO_NONE), |
| 900 |
.driver_info = (unsigned long)&wwan_info, |
| 901 |
}, { |
| 902 |
/* U-blox SARA-U2 */ |
| 903 |
USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1104, USB_CLASS_COMM, |
| 904 |
USB_CDC_SUBCLASS_ETHERNET, |
| 905 |
USB_CDC_PROTO_NONE), |
| 906 |
.driver_info = (unsigned long)&wwan_info, |
| 907 |
}, { |
| 908 |
/* U-blox LARA-R6 01B */ |
| 909 |
USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1313, USB_CLASS_COMM, |
| 910 |
USB_CDC_SUBCLASS_ETHERNET, |
| 911 |
USB_CDC_PROTO_NONE), |
| 912 |
.driver_info = (unsigned long)&wwan_info, |
| 913 |
}, { |
| 914 |
/* U-blox LARA-L6 */ |
| 915 |
USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1343, USB_CLASS_COMM, |
| 916 |
USB_CDC_SUBCLASS_ETHERNET, |
| 917 |
USB_CDC_PROTO_NONE), |
| 918 |
.driver_info = (unsigned long)&wwan_info, |
| 919 |
}, { |
| 920 |
/* Cinterion PLS8 modem by GEMALTO */ |
| 921 |
USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0061, USB_CLASS_COMM, |
| 922 |
USB_CDC_SUBCLASS_ETHERNET, |
| 923 |
USB_CDC_PROTO_NONE), |
| 924 |
.driver_info = (unsigned long)&wwan_info, |
| 925 |
}, { |
| 926 |
/* Cinterion AHS3 modem by GEMALTO */ |
| 927 |
USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0055, USB_CLASS_COMM, |
| 928 |
USB_CDC_SUBCLASS_ETHERNET, |
| 929 |
USB_CDC_PROTO_NONE), |
| 930 |
.driver_info = (unsigned long)&wwan_info, |
| 931 |
}, { |
| 932 |
/* Cinterion PLS62-W modem by GEMALTO/THALES */ |
| 933 |
USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x005b, USB_CLASS_COMM, |
| 934 |
USB_CDC_SUBCLASS_ETHERNET, |
| 935 |
USB_CDC_PROTO_NONE), |
| 936 |
.driver_info = (unsigned long)&wwan_info, |
| 937 |
}, { |
| 938 |
/* Cinterion PLS83/PLS63 modem by GEMALTO/THALES */ |
| 939 |
USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0069, USB_CLASS_COMM, |
| 940 |
USB_CDC_SUBCLASS_ETHERNET, |
| 941 |
USB_CDC_PROTO_NONE), |
| 942 |
.driver_info = (unsigned long)&wwan_info, |
| 943 |
}, { |
| 944 |
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, |
| 945 |
USB_CDC_PROTO_NONE), |
| 946 |
.driver_info = (unsigned long) &cdc_info, |
| 947 |
}, { |
| 948 |
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, |
| 949 |
USB_CDC_PROTO_NONE), |
| 950 |
.driver_info = (unsigned long)&wwan_info, |
| 951 |
|
| 952 |
}, { |
| 953 |
/* Various Huawei modems with a network port like the UMG1831 */ |
| 954 |
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM, |
| 955 |
USB_CDC_SUBCLASS_ETHERNET, 255), |
| 956 |
.driver_info = (unsigned long)&wwan_info, |
| 957 |
}, |
| 958 |
{ }, /* END */ |
| 959 |
}; |
| 960 |
MODULE_DEVICE_TABLE(usb, products); |
| 961 |
|
| 962 |
static struct usb_driver cdc_driver = { |
| 963 |
.name = "cdc_ether", |
| 964 |
.id_table = products, |
| 965 |
.probe = usbnet_probe, |
| 966 |
.disconnect = usbnet_disconnect, |
| 967 |
.suspend = usbnet_suspend, |
| 968 |
.resume = usbnet_resume, |
| 969 |
.reset_resume = usbnet_resume, |
| 970 |
.supports_autosuspend = 1, |
| 971 |
.disable_hub_initiated_lpm = 1, |
| 972 |
}; |
| 973 |
|
| 974 |
module_usb_driver(cdc_driver); |
| 975 |
|
| 976 |
MODULE_AUTHOR("David Brownell"); |
| 977 |
MODULE_DESCRIPTION("USB CDC Ethernet devices"); |
| 978 |
MODULE_LICENSE("GPL"); |