| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/****************************************************************************** |
| 3 |
* |
| 4 |
* Driver for Option High Speed Mobile Devices. |
| 5 |
* |
| 6 |
* Copyright (C) 2008 Option International |
| 7 |
* Filip Aben <[email protected]> |
| 8 |
* Denis Joseph Barrow <[email protected]> |
| 9 |
* Jan Dumon <[email protected]> |
| 10 |
* Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd) |
| 11 |
* <[email protected]> |
| 12 |
* Copyright (C) 2008 Greg Kroah-Hartman <[email protected]> |
| 13 |
* Copyright (C) 2008 Novell, Inc. |
| 14 |
* |
| 15 |
*****************************************************************************/ |
| 16 |
|
| 17 |
/****************************************************************************** |
| 18 |
* |
| 19 |
* Description of the device: |
| 20 |
* |
| 21 |
* Interface 0: Contains the IP network interface on the bulk end points. |
| 22 |
* The multiplexed serial ports are using the interrupt and |
| 23 |
* control endpoints. |
| 24 |
* Interrupt contains a bitmap telling which multiplexed |
| 25 |
* serialport needs servicing. |
| 26 |
* |
| 27 |
* Interface 1: Diagnostics port, uses bulk only, do not submit urbs until the |
| 28 |
* port is opened, as this have a huge impact on the network port |
| 29 |
* throughput. |
| 30 |
* |
| 31 |
* Interface 2: Standard modem interface - circuit switched interface, this |
| 32 |
* can be used to make a standard ppp connection however it |
| 33 |
* should not be used in conjunction with the IP network interface |
| 34 |
* enabled for USB performance reasons i.e. if using this set |
| 35 |
* ideally disable_net=1. |
| 36 |
* |
| 37 |
*****************************************************************************/ |
| 38 |
|
| 39 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 40 |
|
| 41 |
#include <linux/sched/signal.h> |
| 42 |
#include <linux/slab.h> |
| 43 |
#include <linux/init.h> |
| 44 |
#include <linux/delay.h> |
| 45 |
#include <linux/netdevice.h> |
| 46 |
#include <linux/module.h> |
| 47 |
#include <linux/ethtool.h> |
| 48 |
#include <linux/usb.h> |
| 49 |
#include <linux/tty.h> |
| 50 |
#include <linux/tty_driver.h> |
| 51 |
#include <linux/tty_flip.h> |
| 52 |
#include <linux/kmod.h> |
| 53 |
#include <linux/rfkill.h> |
| 54 |
#include <linux/ip.h> |
| 55 |
#include <linux/uaccess.h> |
| 56 |
#include <linux/usb/cdc.h> |
| 57 |
#include <net/arp.h> |
| 58 |
#include <asm/byteorder.h> |
| 59 |
#include <linux/serial_core.h> |
| 60 |
#include <linux/serial.h> |
| 61 |
|
| 62 |
|
| 63 |
#define MOD_AUTHOR "Option Wireless" |
| 64 |
#define MOD_DESCRIPTION "USB High Speed Option driver" |
| 65 |
|
| 66 |
#define HSO_MAX_NET_DEVICES 10 |
| 67 |
#define HSO__MAX_MTU 2048 |
| 68 |
#define DEFAULT_MTU 1500 |
| 69 |
#define DEFAULT_MRU 1500 |
| 70 |
|
| 71 |
#define CTRL_URB_RX_SIZE 1024 |
| 72 |
#define CTRL_URB_TX_SIZE 64 |
| 73 |
|
| 74 |
#define BULK_URB_RX_SIZE 4096 |
| 75 |
#define BULK_URB_TX_SIZE 8192 |
| 76 |
|
| 77 |
#define MUX_BULK_RX_BUF_SIZE HSO__MAX_MTU |
| 78 |
#define MUX_BULK_TX_BUF_SIZE HSO__MAX_MTU |
| 79 |
#define MUX_BULK_RX_BUF_COUNT 4 |
| 80 |
#define USB_TYPE_OPTION_VENDOR 0x20 |
| 81 |
|
| 82 |
/* These definitions are used with the struct hso_net flags element */ |
| 83 |
/* - use *_bit operations on it. (bit indices not values.) */ |
| 84 |
#define HSO_NET_RUNNING 0 |
| 85 |
|
| 86 |
#define HSO_NET_TX_TIMEOUT (HZ*10) |
| 87 |
|
| 88 |
#define HSO_SERIAL_MAGIC 0x48534f31 |
| 89 |
|
| 90 |
/* Number of ttys to handle */ |
| 91 |
#define HSO_SERIAL_TTY_MINORS 256 |
| 92 |
|
| 93 |
#define MAX_RX_URBS 2 |
| 94 |
|
| 95 |
/*****************************************************************************/ |
| 96 |
/* Debugging functions */ |
| 97 |
/*****************************************************************************/ |
| 98 |
#define hso_dbg(lvl, fmt, ...) \ |
| 99 |
do { \ |
| 100 |
if ((lvl) & debug) \ |
| 101 |
pr_info("[%d:%s] " fmt, \ |
| 102 |
__LINE__, __func__, ##__VA_ARGS__); \ |
| 103 |
} while (0) |
| 104 |
|
| 105 |
/*****************************************************************************/ |
| 106 |
/* Enumerators */ |
| 107 |
/*****************************************************************************/ |
| 108 |
enum pkt_parse_state { |
| 109 |
WAIT_IP, |
| 110 |
WAIT_DATA, |
| 111 |
WAIT_SYNC |
| 112 |
}; |
| 113 |
|
| 114 |
/*****************************************************************************/ |
| 115 |
/* Structs */ |
| 116 |
/*****************************************************************************/ |
| 117 |
|
| 118 |
struct hso_shared_int { |
| 119 |
struct usb_endpoint_descriptor *intr_endp; |
| 120 |
void *shared_intr_buf; |
| 121 |
struct urb *shared_intr_urb; |
| 122 |
struct usb_device *usb; |
| 123 |
int use_count; |
| 124 |
int ref_count; |
| 125 |
struct mutex shared_int_lock; |
| 126 |
}; |
| 127 |
|
| 128 |
struct hso_net { |
| 129 |
struct hso_device *parent; |
| 130 |
struct net_device *net; |
| 131 |
struct rfkill *rfkill; |
| 132 |
char name[24]; |
| 133 |
|
| 134 |
struct usb_endpoint_descriptor *in_endp; |
| 135 |
struct usb_endpoint_descriptor *out_endp; |
| 136 |
|
| 137 |
struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT]; |
| 138 |
struct urb *mux_bulk_tx_urb; |
| 139 |
void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT]; |
| 140 |
void *mux_bulk_tx_buf; |
| 141 |
|
| 142 |
struct sk_buff *skb_rx_buf; |
| 143 |
struct sk_buff *skb_tx_buf; |
| 144 |
|
| 145 |
enum pkt_parse_state rx_parse_state; |
| 146 |
spinlock_t net_lock; |
| 147 |
|
| 148 |
unsigned short rx_buf_size; |
| 149 |
unsigned short rx_buf_missing; |
| 150 |
struct iphdr rx_ip_hdr; |
| 151 |
|
| 152 |
unsigned long flags; |
| 153 |
}; |
| 154 |
|
| 155 |
enum rx_ctrl_state{ |
| 156 |
RX_IDLE, |
| 157 |
RX_SENT, |
| 158 |
RX_PENDING |
| 159 |
}; |
| 160 |
|
| 161 |
#define BM_REQUEST_TYPE (0xa1) |
| 162 |
#define B_NOTIFICATION (0x20) |
| 163 |
#define W_VALUE (0x0) |
| 164 |
#define W_LENGTH (0x2) |
| 165 |
|
| 166 |
#define B_OVERRUN (0x1<<6) |
| 167 |
#define B_PARITY (0x1<<5) |
| 168 |
#define B_FRAMING (0x1<<4) |
| 169 |
#define B_RING_SIGNAL (0x1<<3) |
| 170 |
#define B_BREAK (0x1<<2) |
| 171 |
#define B_TX_CARRIER (0x1<<1) |
| 172 |
#define B_RX_CARRIER (0x1<<0) |
| 173 |
|
| 174 |
struct hso_serial_state_notification { |
| 175 |
u8 bmRequestType; |
| 176 |
u8 bNotification; |
| 177 |
u16 wValue; |
| 178 |
u16 wIndex; |
| 179 |
u16 wLength; |
| 180 |
u16 UART_state_bitmap; |
| 181 |
} __packed; |
| 182 |
|
| 183 |
struct hso_tiocmget { |
| 184 |
struct mutex mutex; |
| 185 |
wait_queue_head_t waitq; |
| 186 |
int intr_completed; |
| 187 |
struct usb_endpoint_descriptor *endp; |
| 188 |
struct urb *urb; |
| 189 |
struct hso_serial_state_notification *serial_state_notification; |
| 190 |
u16 prev_UART_state_bitmap; |
| 191 |
struct uart_icount icount; |
| 192 |
}; |
| 193 |
|
| 194 |
|
| 195 |
struct hso_serial { |
| 196 |
struct hso_device *parent; |
| 197 |
int magic; |
| 198 |
u8 minor; |
| 199 |
|
| 200 |
struct hso_shared_int *shared_int; |
| 201 |
|
| 202 |
/* rx/tx urb could be either a bulk urb or a control urb depending |
| 203 |
on which serial port it is used on. */ |
| 204 |
struct urb *rx_urb[MAX_RX_URBS]; |
| 205 |
u8 num_rx_urbs; |
| 206 |
u8 *rx_data[MAX_RX_URBS]; |
| 207 |
u16 rx_data_length; /* should contain allocated length */ |
| 208 |
|
| 209 |
struct urb *tx_urb; |
| 210 |
u8 *tx_data; |
| 211 |
u8 *tx_buffer; |
| 212 |
u16 tx_data_length; /* should contain allocated length */ |
| 213 |
u16 tx_data_count; |
| 214 |
u16 tx_buffer_count; |
| 215 |
struct usb_ctrlrequest ctrl_req_tx; |
| 216 |
struct usb_ctrlrequest ctrl_req_rx; |
| 217 |
|
| 218 |
struct usb_endpoint_descriptor *in_endp; |
| 219 |
struct usb_endpoint_descriptor *out_endp; |
| 220 |
|
| 221 |
enum rx_ctrl_state rx_state; |
| 222 |
u8 rts_state; |
| 223 |
u8 dtr_state; |
| 224 |
unsigned tx_urb_used:1; |
| 225 |
|
| 226 |
struct tty_port port; |
| 227 |
/* from usb_serial_port */ |
| 228 |
spinlock_t serial_lock; |
| 229 |
|
| 230 |
int (*write_data) (struct hso_serial *serial); |
| 231 |
struct hso_tiocmget *tiocmget; |
| 232 |
/* Hacks required to get flow control |
| 233 |
* working on the serial receive buffers |
| 234 |
* so as not to drop characters on the floor. |
| 235 |
*/ |
| 236 |
int curr_rx_urb_idx; |
| 237 |
u8 rx_urb_filled[MAX_RX_URBS]; |
| 238 |
struct tasklet_struct unthrottle_tasklet; |
| 239 |
}; |
| 240 |
|
| 241 |
struct hso_device { |
| 242 |
union { |
| 243 |
struct hso_serial *dev_serial; |
| 244 |
struct hso_net *dev_net; |
| 245 |
} port_data; |
| 246 |
|
| 247 |
u32 port_spec; |
| 248 |
|
| 249 |
u8 is_active; |
| 250 |
u8 usb_gone; |
| 251 |
struct work_struct async_get_intf; |
| 252 |
struct work_struct async_put_intf; |
| 253 |
|
| 254 |
struct usb_device *usb; |
| 255 |
struct usb_interface *interface; |
| 256 |
|
| 257 |
struct device *dev; |
| 258 |
struct kref ref; |
| 259 |
struct mutex mutex; |
| 260 |
}; |
| 261 |
|
| 262 |
/* Type of interface */ |
| 263 |
#define HSO_INTF_MASK 0xFF00 |
| 264 |
#define HSO_INTF_MUX 0x0100 |
| 265 |
#define HSO_INTF_BULK 0x0200 |
| 266 |
|
| 267 |
/* Type of port */ |
| 268 |
#define HSO_PORT_MASK 0xFF |
| 269 |
#define HSO_PORT_NO_PORT 0x0 |
| 270 |
#define HSO_PORT_CONTROL 0x1 |
| 271 |
#define HSO_PORT_APP 0x2 |
| 272 |
#define HSO_PORT_GPS 0x3 |
| 273 |
#define HSO_PORT_PCSC 0x4 |
| 274 |
#define HSO_PORT_APP2 0x5 |
| 275 |
#define HSO_PORT_GPS_CONTROL 0x6 |
| 276 |
#define HSO_PORT_MSD 0x7 |
| 277 |
#define HSO_PORT_VOICE 0x8 |
| 278 |
#define HSO_PORT_DIAG2 0x9 |
| 279 |
#define HSO_PORT_DIAG 0x10 |
| 280 |
#define HSO_PORT_MODEM 0x11 |
| 281 |
#define HSO_PORT_NETWORK 0x12 |
| 282 |
|
| 283 |
/* Additional device info */ |
| 284 |
#define HSO_INFO_MASK 0xFF000000 |
| 285 |
#define HSO_INFO_CRC_BUG 0x01000000 |
| 286 |
|
| 287 |
/*****************************************************************************/ |
| 288 |
/* Prototypes */ |
| 289 |
/*****************************************************************************/ |
| 290 |
/* Serial driver functions */ |
| 291 |
static int hso_serial_tiocmset(struct tty_struct *tty, |
| 292 |
unsigned int set, unsigned int clear); |
| 293 |
static void ctrl_callback(struct urb *urb); |
| 294 |
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial); |
| 295 |
static void hso_kick_transmit(struct hso_serial *serial); |
| 296 |
/* Helper functions */ |
| 297 |
static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int, |
| 298 |
struct usb_device *usb, gfp_t gfp); |
| 299 |
static void handle_usb_error(int status, const char *function, |
| 300 |
struct hso_device *hso_dev); |
| 301 |
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, |
| 302 |
int type, int dir); |
| 303 |
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports); |
| 304 |
static void hso_free_interface(struct usb_interface *intf); |
| 305 |
static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags); |
| 306 |
static int hso_stop_serial_device(struct hso_device *hso_dev); |
| 307 |
static int hso_start_net_device(struct hso_device *hso_dev); |
| 308 |
static void hso_free_shared_int(struct hso_shared_int *shared_int); |
| 309 |
static int hso_stop_net_device(struct hso_device *hso_dev); |
| 310 |
static void hso_serial_ref_free(struct kref *ref); |
| 311 |
static void hso_std_serial_read_bulk_callback(struct urb *urb); |
| 312 |
static int hso_mux_serial_read(struct hso_serial *serial); |
| 313 |
static void async_get_intf(struct work_struct *data); |
| 314 |
static void async_put_intf(struct work_struct *data); |
| 315 |
static int hso_put_activity(struct hso_device *hso_dev); |
| 316 |
static int hso_get_activity(struct hso_device *hso_dev); |
| 317 |
static void tiocmget_intr_callback(struct urb *urb); |
| 318 |
/*****************************************************************************/ |
| 319 |
/* Helping functions */ |
| 320 |
/*****************************************************************************/ |
| 321 |
|
| 322 |
/* #define DEBUG */ |
| 323 |
|
| 324 |
static inline struct hso_net *dev2net(struct hso_device *hso_dev) |
| 325 |
{ |
| 326 |
return hso_dev->port_data.dev_net; |
| 327 |
} |
| 328 |
|
| 329 |
static inline struct hso_serial *dev2ser(struct hso_device *hso_dev) |
| 330 |
{ |
| 331 |
return hso_dev->port_data.dev_serial; |
| 332 |
} |
| 333 |
|
| 334 |
/* Debugging functions */ |
| 335 |
#ifdef DEBUG |
| 336 |
static void dbg_dump(int line_count, const char *func_name, unsigned char *buf, |
| 337 |
unsigned int len) |
| 338 |
{ |
| 339 |
static char name[255]; |
| 340 |
|
| 341 |
sprintf(name, "hso[%d:%s]", line_count, func_name); |
| 342 |
print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len); |
| 343 |
} |
| 344 |
|
| 345 |
#define DUMP(buf_, len_) \ |
| 346 |
dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_) |
| 347 |
|
| 348 |
#define DUMP1(buf_, len_) \ |
| 349 |
do { \ |
| 350 |
if (0x01 & debug) \ |
| 351 |
DUMP(buf_, len_); \ |
| 352 |
} while (0) |
| 353 |
#else |
| 354 |
#define DUMP(buf_, len_) |
| 355 |
#define DUMP1(buf_, len_) |
| 356 |
#endif |
| 357 |
|
| 358 |
/* module parameters */ |
| 359 |
static int debug; |
| 360 |
static int tty_major; |
| 361 |
static int disable_net; |
| 362 |
|
| 363 |
/* driver info */ |
| 364 |
static const char driver_name[] = "hso"; |
| 365 |
static const char tty_filename[] = "ttyHS"; |
| 366 |
/* the usb driver itself (registered in hso_init) */ |
| 367 |
static struct usb_driver hso_driver; |
| 368 |
/* serial structures */ |
| 369 |
static struct tty_driver *tty_drv; |
| 370 |
static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS]; |
| 371 |
static struct hso_device *network_table[HSO_MAX_NET_DEVICES]; |
| 372 |
static DEFINE_SPINLOCK(serial_table_lock); |
| 373 |
|
| 374 |
static const s32 default_port_spec[] = { |
| 375 |
HSO_INTF_MUX | HSO_PORT_NETWORK, |
| 376 |
HSO_INTF_BULK | HSO_PORT_DIAG, |
| 377 |
HSO_INTF_BULK | HSO_PORT_MODEM, |
| 378 |
0 |
| 379 |
}; |
| 380 |
|
| 381 |
static const s32 icon321_port_spec[] = { |
| 382 |
HSO_INTF_MUX | HSO_PORT_NETWORK, |
| 383 |
HSO_INTF_BULK | HSO_PORT_DIAG2, |
| 384 |
HSO_INTF_BULK | HSO_PORT_MODEM, |
| 385 |
HSO_INTF_BULK | HSO_PORT_DIAG, |
| 386 |
0 |
| 387 |
}; |
| 388 |
|
| 389 |
#define default_port_device(vendor, product) \ |
| 390 |
USB_DEVICE(vendor, product), \ |
| 391 |
.driver_info = (kernel_ulong_t)default_port_spec |
| 392 |
|
| 393 |
#define icon321_port_device(vendor, product) \ |
| 394 |
USB_DEVICE(vendor, product), \ |
| 395 |
.driver_info = (kernel_ulong_t)icon321_port_spec |
| 396 |
|
| 397 |
/* list of devices we support */ |
| 398 |
static const struct usb_device_id hso_ids[] = { |
| 399 |
{default_port_device(0x0af0, 0x6711)}, |
| 400 |
{default_port_device(0x0af0, 0x6731)}, |
| 401 |
{default_port_device(0x0af0, 0x6751)}, |
| 402 |
{default_port_device(0x0af0, 0x6771)}, |
| 403 |
{default_port_device(0x0af0, 0x6791)}, |
| 404 |
{default_port_device(0x0af0, 0x6811)}, |
| 405 |
{default_port_device(0x0af0, 0x6911)}, |
| 406 |
{default_port_device(0x0af0, 0x6951)}, |
| 407 |
{default_port_device(0x0af0, 0x6971)}, |
| 408 |
{default_port_device(0x0af0, 0x7011)}, |
| 409 |
{default_port_device(0x0af0, 0x7031)}, |
| 410 |
{default_port_device(0x0af0, 0x7051)}, |
| 411 |
{default_port_device(0x0af0, 0x7071)}, |
| 412 |
{default_port_device(0x0af0, 0x7111)}, |
| 413 |
{default_port_device(0x0af0, 0x7211)}, |
| 414 |
{default_port_device(0x0af0, 0x7251)}, |
| 415 |
{default_port_device(0x0af0, 0x7271)}, |
| 416 |
{default_port_device(0x0af0, 0x7311)}, |
| 417 |
{default_port_device(0x0af0, 0xc031)}, /* Icon-Edge */ |
| 418 |
{icon321_port_device(0x0af0, 0xd013)}, /* Module HSxPA */ |
| 419 |
{icon321_port_device(0x0af0, 0xd031)}, /* Icon-321 */ |
| 420 |
{icon321_port_device(0x0af0, 0xd033)}, /* Icon-322 */ |
| 421 |
{USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */ |
| 422 |
{USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */ |
| 423 |
{USB_DEVICE(0x0af0, 0x7381)}, /* GE40x */ |
| 424 |
{USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */ |
| 425 |
{USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */ |
| 426 |
{USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */ |
| 427 |
{USB_DEVICE(0x0af0, 0x7701)}, |
| 428 |
{USB_DEVICE(0x0af0, 0x7706)}, |
| 429 |
{USB_DEVICE(0x0af0, 0x7801)}, |
| 430 |
{USB_DEVICE(0x0af0, 0x7901)}, |
| 431 |
{USB_DEVICE(0x0af0, 0x7A01)}, |
| 432 |
{USB_DEVICE(0x0af0, 0x7A05)}, |
| 433 |
{USB_DEVICE(0x0af0, 0x8200)}, |
| 434 |
{USB_DEVICE(0x0af0, 0x8201)}, |
| 435 |
{USB_DEVICE(0x0af0, 0x8300)}, |
| 436 |
{USB_DEVICE(0x0af0, 0x8302)}, |
| 437 |
{USB_DEVICE(0x0af0, 0x8304)}, |
| 438 |
{USB_DEVICE(0x0af0, 0x8400)}, |
| 439 |
{USB_DEVICE(0x0af0, 0x8600)}, |
| 440 |
{USB_DEVICE(0x0af0, 0x8800)}, |
| 441 |
{USB_DEVICE(0x0af0, 0x8900)}, |
| 442 |
{USB_DEVICE(0x0af0, 0x9000)}, |
| 443 |
{USB_DEVICE(0x0af0, 0x9200)}, /* Option GTM671WFS */ |
| 444 |
{USB_DEVICE(0x0af0, 0xd035)}, |
| 445 |
{USB_DEVICE(0x0af0, 0xd055)}, |
| 446 |
{USB_DEVICE(0x0af0, 0xd155)}, |
| 447 |
{USB_DEVICE(0x0af0, 0xd255)}, |
| 448 |
{USB_DEVICE(0x0af0, 0xd057)}, |
| 449 |
{USB_DEVICE(0x0af0, 0xd157)}, |
| 450 |
{USB_DEVICE(0x0af0, 0xd257)}, |
| 451 |
{USB_DEVICE(0x0af0, 0xd357)}, |
| 452 |
{USB_DEVICE(0x0af0, 0xd058)}, |
| 453 |
{USB_DEVICE(0x0af0, 0xc100)}, |
| 454 |
{} |
| 455 |
}; |
| 456 |
MODULE_DEVICE_TABLE(usb, hso_ids); |
| 457 |
|
| 458 |
/* Sysfs attribute */ |
| 459 |
static ssize_t hsotype_show(struct device *dev, |
| 460 |
struct device_attribute *attr, char *buf) |
| 461 |
{ |
| 462 |
struct hso_device *hso_dev = dev_get_drvdata(dev); |
| 463 |
char *port_name; |
| 464 |
|
| 465 |
if (!hso_dev) |
| 466 |
return 0; |
| 467 |
|
| 468 |
switch (hso_dev->port_spec & HSO_PORT_MASK) { |
| 469 |
case HSO_PORT_CONTROL: |
| 470 |
port_name = "Control"; |
| 471 |
break; |
| 472 |
case HSO_PORT_APP: |
| 473 |
port_name = "Application"; |
| 474 |
break; |
| 475 |
case HSO_PORT_APP2: |
| 476 |
port_name = "Application2"; |
| 477 |
break; |
| 478 |
case HSO_PORT_GPS: |
| 479 |
port_name = "GPS"; |
| 480 |
break; |
| 481 |
case HSO_PORT_GPS_CONTROL: |
| 482 |
port_name = "GPS Control"; |
| 483 |
break; |
| 484 |
case HSO_PORT_PCSC: |
| 485 |
port_name = "PCSC"; |
| 486 |
break; |
| 487 |
case HSO_PORT_DIAG: |
| 488 |
port_name = "Diagnostic"; |
| 489 |
break; |
| 490 |
case HSO_PORT_DIAG2: |
| 491 |
port_name = "Diagnostic2"; |
| 492 |
break; |
| 493 |
case HSO_PORT_MODEM: |
| 494 |
port_name = "Modem"; |
| 495 |
break; |
| 496 |
case HSO_PORT_NETWORK: |
| 497 |
port_name = "Network"; |
| 498 |
break; |
| 499 |
default: |
| 500 |
port_name = "Unknown"; |
| 501 |
break; |
| 502 |
} |
| 503 |
|
| 504 |
return sprintf(buf, "%s\n", port_name); |
| 505 |
} |
| 506 |
static DEVICE_ATTR_RO(hsotype); |
| 507 |
|
| 508 |
static struct attribute *hso_serial_dev_attrs[] = { |
| 509 |
&dev_attr_hsotype.attr, |
| 510 |
NULL |
| 511 |
}; |
| 512 |
|
| 513 |
ATTRIBUTE_GROUPS(hso_serial_dev); |
| 514 |
|
| 515 |
static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb) |
| 516 |
{ |
| 517 |
int idx; |
| 518 |
|
| 519 |
for (idx = 0; idx < serial->num_rx_urbs; idx++) |
| 520 |
if (serial->rx_urb[idx] == urb) |
| 521 |
return idx; |
| 522 |
dev_err(serial->parent->dev, "hso_urb_to_index failed\n"); |
| 523 |
return -1; |
| 524 |
} |
| 525 |
|
| 526 |
/* converts mux value to a port spec value */ |
| 527 |
static u32 hso_mux_to_port(int mux) |
| 528 |
{ |
| 529 |
u32 result; |
| 530 |
|
| 531 |
switch (mux) { |
| 532 |
case 0x1: |
| 533 |
result = HSO_PORT_CONTROL; |
| 534 |
break; |
| 535 |
case 0x2: |
| 536 |
result = HSO_PORT_APP; |
| 537 |
break; |
| 538 |
case 0x4: |
| 539 |
result = HSO_PORT_PCSC; |
| 540 |
break; |
| 541 |
case 0x8: |
| 542 |
result = HSO_PORT_GPS; |
| 543 |
break; |
| 544 |
case 0x10: |
| 545 |
result = HSO_PORT_APP2; |
| 546 |
break; |
| 547 |
default: |
| 548 |
result = HSO_PORT_NO_PORT; |
| 549 |
} |
| 550 |
return result; |
| 551 |
} |
| 552 |
|
| 553 |
/* converts port spec value to a mux value */ |
| 554 |
static u32 hso_port_to_mux(int port) |
| 555 |
{ |
| 556 |
u32 result; |
| 557 |
|
| 558 |
switch (port & HSO_PORT_MASK) { |
| 559 |
case HSO_PORT_CONTROL: |
| 560 |
result = 0x0; |
| 561 |
break; |
| 562 |
case HSO_PORT_APP: |
| 563 |
result = 0x1; |
| 564 |
break; |
| 565 |
case HSO_PORT_PCSC: |
| 566 |
result = 0x2; |
| 567 |
break; |
| 568 |
case HSO_PORT_GPS: |
| 569 |
result = 0x3; |
| 570 |
break; |
| 571 |
case HSO_PORT_APP2: |
| 572 |
result = 0x4; |
| 573 |
break; |
| 574 |
default: |
| 575 |
result = 0x0; |
| 576 |
} |
| 577 |
return result; |
| 578 |
} |
| 579 |
|
| 580 |
static struct hso_serial *get_serial_by_shared_int_and_type( |
| 581 |
struct hso_shared_int *shared_int, |
| 582 |
int mux) |
| 583 |
{ |
| 584 |
int i, port; |
| 585 |
|
| 586 |
port = hso_mux_to_port(mux); |
| 587 |
|
| 588 |
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { |
| 589 |
if (serial_table[i] && |
| 590 |
(dev2ser(serial_table[i])->shared_int == shared_int) && |
| 591 |
((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) { |
| 592 |
return dev2ser(serial_table[i]); |
| 593 |
} |
| 594 |
} |
| 595 |
|
| 596 |
return NULL; |
| 597 |
} |
| 598 |
|
| 599 |
static struct hso_serial *get_serial_by_index(unsigned index) |
| 600 |
{ |
| 601 |
struct hso_serial *serial = NULL; |
| 602 |
unsigned long flags; |
| 603 |
|
| 604 |
spin_lock_irqsave(&serial_table_lock, flags); |
| 605 |
if (serial_table[index]) |
| 606 |
serial = dev2ser(serial_table[index]); |
| 607 |
spin_unlock_irqrestore(&serial_table_lock, flags); |
| 608 |
|
| 609 |
return serial; |
| 610 |
} |
| 611 |
|
| 612 |
static int obtain_minor(struct hso_serial *serial) |
| 613 |
{ |
| 614 |
int index; |
| 615 |
unsigned long flags; |
| 616 |
|
| 617 |
spin_lock_irqsave(&serial_table_lock, flags); |
| 618 |
for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) { |
| 619 |
if (serial_table[index] == NULL) { |
| 620 |
serial_table[index] = serial->parent; |
| 621 |
serial->minor = index; |
| 622 |
spin_unlock_irqrestore(&serial_table_lock, flags); |
| 623 |
return 0; |
| 624 |
} |
| 625 |
} |
| 626 |
spin_unlock_irqrestore(&serial_table_lock, flags); |
| 627 |
|
| 628 |
pr_err("%s: no free serial devices in table\n", __func__); |
| 629 |
return -1; |
| 630 |
} |
| 631 |
|
| 632 |
static void release_minor(struct hso_serial *serial) |
| 633 |
{ |
| 634 |
unsigned long flags; |
| 635 |
|
| 636 |
spin_lock_irqsave(&serial_table_lock, flags); |
| 637 |
serial_table[serial->minor] = NULL; |
| 638 |
spin_unlock_irqrestore(&serial_table_lock, flags); |
| 639 |
} |
| 640 |
|
| 641 |
static void handle_usb_error(int status, const char *function, |
| 642 |
struct hso_device *hso_dev) |
| 643 |
{ |
| 644 |
char *explanation; |
| 645 |
|
| 646 |
switch (status) { |
| 647 |
case -ENODEV: |
| 648 |
explanation = "no device"; |
| 649 |
break; |
| 650 |
case -ENOENT: |
| 651 |
explanation = "endpoint not enabled"; |
| 652 |
break; |
| 653 |
case -EPIPE: |
| 654 |
explanation = "endpoint stalled"; |
| 655 |
break; |
| 656 |
case -ENOSPC: |
| 657 |
explanation = "not enough bandwidth"; |
| 658 |
break; |
| 659 |
case -ESHUTDOWN: |
| 660 |
explanation = "device disabled"; |
| 661 |
break; |
| 662 |
case -EHOSTUNREACH: |
| 663 |
explanation = "device suspended"; |
| 664 |
break; |
| 665 |
case -EINVAL: |
| 666 |
case -EAGAIN: |
| 667 |
case -EFBIG: |
| 668 |
case -EMSGSIZE: |
| 669 |
explanation = "internal error"; |
| 670 |
break; |
| 671 |
case -EILSEQ: |
| 672 |
case -EPROTO: |
| 673 |
case -ETIME: |
| 674 |
case -ETIMEDOUT: |
| 675 |
explanation = "protocol error"; |
| 676 |
if (hso_dev) |
| 677 |
usb_queue_reset_device(hso_dev->interface); |
| 678 |
break; |
| 679 |
default: |
| 680 |
explanation = "unknown status"; |
| 681 |
break; |
| 682 |
} |
| 683 |
|
| 684 |
/* log a meaningful explanation of an USB status */ |
| 685 |
hso_dbg(0x1, "%s: received USB status - %s (%d)\n", |
| 686 |
function, explanation, status); |
| 687 |
} |
| 688 |
|
| 689 |
/* Network interface functions */ |
| 690 |
|
| 691 |
/* called when net interface is brought up by ifconfig */ |
| 692 |
static int hso_net_open(struct net_device *net) |
| 693 |
{ |
| 694 |
struct hso_net *odev = netdev_priv(net); |
| 695 |
unsigned long flags = 0; |
| 696 |
|
| 697 |
if (!odev) { |
| 698 |
dev_err(&net->dev, "No net device !\n"); |
| 699 |
return -ENODEV; |
| 700 |
} |
| 701 |
|
| 702 |
odev->skb_tx_buf = NULL; |
| 703 |
|
| 704 |
/* setup environment */ |
| 705 |
spin_lock_irqsave(&odev->net_lock, flags); |
| 706 |
odev->rx_parse_state = WAIT_IP; |
| 707 |
odev->rx_buf_size = 0; |
| 708 |
odev->rx_buf_missing = sizeof(struct iphdr); |
| 709 |
spin_unlock_irqrestore(&odev->net_lock, flags); |
| 710 |
|
| 711 |
/* We are up and running. */ |
| 712 |
set_bit(HSO_NET_RUNNING, &odev->flags); |
| 713 |
hso_start_net_device(odev->parent); |
| 714 |
|
| 715 |
/* Tell the kernel we are ready to start receiving from it */ |
| 716 |
netif_start_queue(net); |
| 717 |
|
| 718 |
return 0; |
| 719 |
} |
| 720 |
|
| 721 |
/* called when interface is brought down by ifconfig */ |
| 722 |
static int hso_net_close(struct net_device *net) |
| 723 |
{ |
| 724 |
struct hso_net *odev = netdev_priv(net); |
| 725 |
|
| 726 |
/* we don't need the queue anymore */ |
| 727 |
netif_stop_queue(net); |
| 728 |
/* no longer running */ |
| 729 |
clear_bit(HSO_NET_RUNNING, &odev->flags); |
| 730 |
|
| 731 |
hso_stop_net_device(odev->parent); |
| 732 |
|
| 733 |
/* done */ |
| 734 |
return 0; |
| 735 |
} |
| 736 |
|
| 737 |
/* USB tells is xmit done, we should start the netqueue again */ |
| 738 |
static void write_bulk_callback(struct urb *urb) |
| 739 |
{ |
| 740 |
struct hso_net *odev = urb->context; |
| 741 |
int status = urb->status; |
| 742 |
|
| 743 |
/* Sanity check */ |
| 744 |
if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) { |
| 745 |
dev_err(&urb->dev->dev, "%s: device not running\n", __func__); |
| 746 |
return; |
| 747 |
} |
| 748 |
|
| 749 |
/* Do we still have a valid kernel network device? */ |
| 750 |
if (!netif_device_present(odev->net)) { |
| 751 |
dev_err(&urb->dev->dev, "%s: net device not present\n", |
| 752 |
__func__); |
| 753 |
return; |
| 754 |
} |
| 755 |
|
| 756 |
/* log status, but don't act on it, we don't need to resubmit anything |
| 757 |
* anyhow */ |
| 758 |
if (status) |
| 759 |
handle_usb_error(status, __func__, odev->parent); |
| 760 |
|
| 761 |
hso_put_activity(odev->parent); |
| 762 |
|
| 763 |
/* Tell the network interface we are ready for another frame */ |
| 764 |
netif_wake_queue(odev->net); |
| 765 |
} |
| 766 |
|
| 767 |
/* called by kernel when we need to transmit a packet */ |
| 768 |
static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb, |
| 769 |
struct net_device *net) |
| 770 |
{ |
| 771 |
struct hso_net *odev = netdev_priv(net); |
| 772 |
int result; |
| 773 |
|
| 774 |
/* Tell the kernel, "No more frames 'til we are done with this one." */ |
| 775 |
netif_stop_queue(net); |
| 776 |
if (hso_get_activity(odev->parent) == -EAGAIN) { |
| 777 |
odev->skb_tx_buf = skb; |
| 778 |
return NETDEV_TX_OK; |
| 779 |
} |
| 780 |
|
| 781 |
/* log if asked */ |
| 782 |
DUMP1(skb->data, skb->len); |
| 783 |
/* Copy it from kernel memory to OUR memory */ |
| 784 |
memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len); |
| 785 |
hso_dbg(0x1, "len: %d/%d\n", skb->len, MUX_BULK_TX_BUF_SIZE); |
| 786 |
|
| 787 |
/* Fill in the URB for shipping it out. */ |
| 788 |
usb_fill_bulk_urb(odev->mux_bulk_tx_urb, |
| 789 |
odev->parent->usb, |
| 790 |
usb_sndbulkpipe(odev->parent->usb, |
| 791 |
odev->out_endp-> |
| 792 |
bEndpointAddress & 0x7F), |
| 793 |
odev->mux_bulk_tx_buf, skb->len, write_bulk_callback, |
| 794 |
odev); |
| 795 |
|
| 796 |
/* Deal with the Zero Length packet problem, I hope */ |
| 797 |
odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET; |
| 798 |
|
| 799 |
/* Send the URB on its merry way. */ |
| 800 |
result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC); |
| 801 |
if (result) { |
| 802 |
dev_warn(&odev->parent->interface->dev, |
| 803 |
"failed mux_bulk_tx_urb %d\n", result); |
| 804 |
net->stats.tx_errors++; |
| 805 |
netif_start_queue(net); |
| 806 |
} else { |
| 807 |
net->stats.tx_packets++; |
| 808 |
net->stats.tx_bytes += skb->len; |
| 809 |
} |
| 810 |
dev_kfree_skb(skb); |
| 811 |
/* we're done */ |
| 812 |
return NETDEV_TX_OK; |
| 813 |
} |
| 814 |
|
| 815 |
static const struct ethtool_ops ops = { |
| 816 |
.get_link = ethtool_op_get_link |
| 817 |
}; |
| 818 |
|
| 819 |
/* called when a packet did not ack after watchdogtimeout */ |
| 820 |
static void hso_net_tx_timeout(struct net_device *net, unsigned int txqueue) |
| 821 |
{ |
| 822 |
struct hso_net *odev = netdev_priv(net); |
| 823 |
|
| 824 |
if (!odev) |
| 825 |
return; |
| 826 |
|
| 827 |
/* Tell syslog we are hosed. */ |
| 828 |
dev_warn(&net->dev, "Tx timed out.\n"); |
| 829 |
|
| 830 |
/* Tear the waiting frame off the list */ |
| 831 |
if (odev->mux_bulk_tx_urb) |
| 832 |
usb_unlink_urb(odev->mux_bulk_tx_urb); |
| 833 |
|
| 834 |
/* Update statistics */ |
| 835 |
net->stats.tx_errors++; |
| 836 |
} |
| 837 |
|
| 838 |
/* make a real packet from the received USB buffer */ |
| 839 |
static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt, |
| 840 |
unsigned int count, unsigned char is_eop) |
| 841 |
{ |
| 842 |
unsigned short temp_bytes; |
| 843 |
unsigned short buffer_offset = 0; |
| 844 |
unsigned short frame_len; |
| 845 |
|
| 846 |
/* log if needed */ |
| 847 |
hso_dbg(0x1, "Rx %d bytes\n", count); |
| 848 |
DUMP(ip_pkt, min(128, (int)count)); |
| 849 |
|
| 850 |
while (count) { |
| 851 |
switch (odev->rx_parse_state) { |
| 852 |
case WAIT_IP: |
| 853 |
/* waiting for IP header. */ |
| 854 |
/* wanted bytes - size of ip header */ |
| 855 |
temp_bytes = |
| 856 |
(count < |
| 857 |
odev->rx_buf_missing) ? count : odev-> |
| 858 |
rx_buf_missing; |
| 859 |
|
| 860 |
memcpy(((unsigned char *)(&odev->rx_ip_hdr)) + |
| 861 |
odev->rx_buf_size, ip_pkt + buffer_offset, |
| 862 |
temp_bytes); |
| 863 |
|
| 864 |
odev->rx_buf_size += temp_bytes; |
| 865 |
buffer_offset += temp_bytes; |
| 866 |
odev->rx_buf_missing -= temp_bytes; |
| 867 |
count -= temp_bytes; |
| 868 |
|
| 869 |
if (!odev->rx_buf_missing) { |
| 870 |
/* header is complete allocate an sk_buffer and |
| 871 |
* continue to WAIT_DATA */ |
| 872 |
frame_len = ntohs(odev->rx_ip_hdr.tot_len); |
| 873 |
|
| 874 |
if ((frame_len > DEFAULT_MRU) || |
| 875 |
(frame_len < sizeof(struct iphdr))) { |
| 876 |
dev_err(&odev->net->dev, |
| 877 |
"Invalid frame (%d) length\n", |
| 878 |
frame_len); |
| 879 |
odev->rx_parse_state = WAIT_SYNC; |
| 880 |
continue; |
| 881 |
} |
| 882 |
/* Allocate an sk_buff */ |
| 883 |
odev->skb_rx_buf = netdev_alloc_skb(odev->net, |
| 884 |
frame_len); |
| 885 |
if (!odev->skb_rx_buf) { |
| 886 |
/* We got no receive buffer. */ |
| 887 |
hso_dbg(0x1, "could not allocate memory\n"); |
| 888 |
odev->rx_parse_state = WAIT_SYNC; |
| 889 |
continue; |
| 890 |
} |
| 891 |
|
| 892 |
/* Copy what we got so far. make room for iphdr |
| 893 |
* after tail. */ |
| 894 |
skb_put_data(odev->skb_rx_buf, |
| 895 |
(char *)&(odev->rx_ip_hdr), |
| 896 |
sizeof(struct iphdr)); |
| 897 |
|
| 898 |
/* ETH_HLEN */ |
| 899 |
odev->rx_buf_size = sizeof(struct iphdr); |
| 900 |
|
| 901 |
/* Filip actually use .tot_len */ |
| 902 |
odev->rx_buf_missing = |
| 903 |
frame_len - sizeof(struct iphdr); |
| 904 |
odev->rx_parse_state = WAIT_DATA; |
| 905 |
} |
| 906 |
break; |
| 907 |
|
| 908 |
case WAIT_DATA: |
| 909 |
temp_bytes = (count < odev->rx_buf_missing) |
| 910 |
? count : odev->rx_buf_missing; |
| 911 |
|
| 912 |
/* Copy the rest of the bytes that are left in the |
| 913 |
* buffer into the waiting sk_buf. */ |
| 914 |
/* Make room for temp_bytes after tail. */ |
| 915 |
skb_put_data(odev->skb_rx_buf, |
| 916 |
ip_pkt + buffer_offset, |
| 917 |
temp_bytes); |
| 918 |
|
| 919 |
odev->rx_buf_missing -= temp_bytes; |
| 920 |
count -= temp_bytes; |
| 921 |
buffer_offset += temp_bytes; |
| 922 |
odev->rx_buf_size += temp_bytes; |
| 923 |
if (!odev->rx_buf_missing) { |
| 924 |
/* Packet is complete. Inject into stack. */ |
| 925 |
/* We have IP packet here */ |
| 926 |
odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP); |
| 927 |
skb_reset_mac_header(odev->skb_rx_buf); |
| 928 |
|
| 929 |
/* Ship it off to the kernel */ |
| 930 |
netif_rx(odev->skb_rx_buf); |
| 931 |
/* No longer our buffer. */ |
| 932 |
odev->skb_rx_buf = NULL; |
| 933 |
|
| 934 |
/* update out statistics */ |
| 935 |
odev->net->stats.rx_packets++; |
| 936 |
|
| 937 |
odev->net->stats.rx_bytes += odev->rx_buf_size; |
| 938 |
|
| 939 |
odev->rx_buf_size = 0; |
| 940 |
odev->rx_buf_missing = sizeof(struct iphdr); |
| 941 |
odev->rx_parse_state = WAIT_IP; |
| 942 |
} |
| 943 |
break; |
| 944 |
|
| 945 |
case WAIT_SYNC: |
| 946 |
hso_dbg(0x1, " W_S\n"); |
| 947 |
count = 0; |
| 948 |
break; |
| 949 |
default: |
| 950 |
hso_dbg(0x1, "\n"); |
| 951 |
count--; |
| 952 |
break; |
| 953 |
} |
| 954 |
} |
| 955 |
|
| 956 |
/* Recovery mechanism for WAIT_SYNC state. */ |
| 957 |
if (is_eop) { |
| 958 |
if (odev->rx_parse_state == WAIT_SYNC) { |
| 959 |
odev->rx_parse_state = WAIT_IP; |
| 960 |
odev->rx_buf_size = 0; |
| 961 |
odev->rx_buf_missing = sizeof(struct iphdr); |
| 962 |
} |
| 963 |
} |
| 964 |
} |
| 965 |
|
| 966 |
static void fix_crc_bug(struct urb *urb, __le16 max_packet_size) |
| 967 |
{ |
| 968 |
static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF }; |
| 969 |
u32 rest = urb->actual_length % le16_to_cpu(max_packet_size); |
| 970 |
|
| 971 |
if (((rest == 5) || (rest == 6)) && |
| 972 |
!memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4, |
| 973 |
crc_check, 4)) { |
| 974 |
urb->actual_length -= 4; |
| 975 |
} |
| 976 |
} |
| 977 |
|
| 978 |
/* Moving data from usb to kernel (in interrupt state) */ |
| 979 |
static void read_bulk_callback(struct urb *urb) |
| 980 |
{ |
| 981 |
struct hso_net *odev = urb->context; |
| 982 |
struct net_device *net; |
| 983 |
int result; |
| 984 |
unsigned long flags; |
| 985 |
int status = urb->status; |
| 986 |
|
| 987 |
/* is al ok? (Filip: Who's Al ?) */ |
| 988 |
if (status) { |
| 989 |
handle_usb_error(status, __func__, odev->parent); |
| 990 |
return; |
| 991 |
} |
| 992 |
|
| 993 |
/* Sanity check */ |
| 994 |
if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) { |
| 995 |
hso_dbg(0x1, "BULK IN callback but driver is not active!\n"); |
| 996 |
return; |
| 997 |
} |
| 998 |
usb_mark_last_busy(urb->dev); |
| 999 |
|
| 1000 |
net = odev->net; |
| 1001 |
|
| 1002 |
if (!netif_device_present(net)) { |
| 1003 |
/* Somebody killed our network interface... */ |
| 1004 |
return; |
| 1005 |
} |
| 1006 |
|
| 1007 |
if (odev->parent->port_spec & HSO_INFO_CRC_BUG) |
| 1008 |
fix_crc_bug(urb, odev->in_endp->wMaxPacketSize); |
| 1009 |
|
| 1010 |
/* do we even have a packet? */ |
| 1011 |
if (urb->actual_length) { |
| 1012 |
/* Handle the IP stream, add header and push it onto network |
| 1013 |
* stack if the packet is complete. */ |
| 1014 |
spin_lock_irqsave(&odev->net_lock, flags); |
| 1015 |
packetizeRx(odev, urb->transfer_buffer, urb->actual_length, |
| 1016 |
(urb->transfer_buffer_length > |
| 1017 |
urb->actual_length) ? 1 : 0); |
| 1018 |
spin_unlock_irqrestore(&odev->net_lock, flags); |
| 1019 |
} |
| 1020 |
|
| 1021 |
/* We are done with this URB, resubmit it. Prep the USB to wait for |
| 1022 |
* another frame. Reuse same as received. */ |
| 1023 |
usb_fill_bulk_urb(urb, |
| 1024 |
odev->parent->usb, |
| 1025 |
usb_rcvbulkpipe(odev->parent->usb, |
| 1026 |
odev->in_endp-> |
| 1027 |
bEndpointAddress & 0x7F), |
| 1028 |
urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE, |
| 1029 |
read_bulk_callback, odev); |
| 1030 |
|
| 1031 |
/* Give this to the USB subsystem so it can tell us when more data |
| 1032 |
* arrives. */ |
| 1033 |
result = usb_submit_urb(urb, GFP_ATOMIC); |
| 1034 |
if (result) |
| 1035 |
dev_warn(&odev->parent->interface->dev, |
| 1036 |
"%s failed submit mux_bulk_rx_urb %d\n", __func__, |
| 1037 |
result); |
| 1038 |
} |
| 1039 |
|
| 1040 |
/* Serial driver functions */ |
| 1041 |
|
| 1042 |
static void hso_init_termios(struct ktermios *termios) |
| 1043 |
{ |
| 1044 |
/* |
| 1045 |
* The default requirements for this device are: |
| 1046 |
*/ |
| 1047 |
termios->c_iflag &= |
| 1048 |
~(IGNBRK /* disable ignore break */ |
| 1049 |
| BRKINT /* disable break causes interrupt */ |
| 1050 |
| PARMRK /* disable mark parity errors */ |
| 1051 |
| ISTRIP /* disable clear high bit of input characters */ |
| 1052 |
| INLCR /* disable translate NL to CR */ |
| 1053 |
| IGNCR /* disable ignore CR */ |
| 1054 |
| ICRNL /* disable translate CR to NL */ |
| 1055 |
| IXON); /* disable enable XON/XOFF flow control */ |
| 1056 |
|
| 1057 |
/* disable postprocess output characters */ |
| 1058 |
termios->c_oflag &= ~OPOST; |
| 1059 |
|
| 1060 |
termios->c_lflag &= |
| 1061 |
~(ECHO /* disable echo input characters */ |
| 1062 |
| ECHONL /* disable echo new line */ |
| 1063 |
| ICANON /* disable erase, kill, werase, and rprnt |
| 1064 |
special characters */ |
| 1065 |
| ISIG /* disable interrupt, quit, and suspend special |
| 1066 |
characters */ |
| 1067 |
| IEXTEN); /* disable non-POSIX special characters */ |
| 1068 |
|
| 1069 |
termios->c_cflag &= |
| 1070 |
~(CSIZE /* no size */ |
| 1071 |
| PARENB /* disable parity bit */ |
| 1072 |
| CBAUD /* clear current baud rate */ |
| 1073 |
| CBAUDEX); /* clear current buad rate */ |
| 1074 |
|
| 1075 |
termios->c_cflag |= CS8; /* character size 8 bits */ |
| 1076 |
|
| 1077 |
/* baud rate 115200 */ |
| 1078 |
tty_termios_encode_baud_rate(termios, 115200, 115200); |
| 1079 |
} |
| 1080 |
|
| 1081 |
static void _hso_serial_set_termios(struct tty_struct *tty) |
| 1082 |
{ |
| 1083 |
struct hso_serial *serial = tty->driver_data; |
| 1084 |
|
| 1085 |
if (!serial) { |
| 1086 |
pr_err("%s: no tty structures", __func__); |
| 1087 |
return; |
| 1088 |
} |
| 1089 |
|
| 1090 |
hso_dbg(0x8, "port %d\n", serial->minor); |
| 1091 |
|
| 1092 |
/* |
| 1093 |
* Fix up unsupported bits |
| 1094 |
*/ |
| 1095 |
tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */ |
| 1096 |
|
| 1097 |
tty->termios.c_cflag &= |
| 1098 |
~(CSIZE /* no size */ |
| 1099 |
| PARENB /* disable parity bit */ |
| 1100 |
| CBAUD /* clear current baud rate */ |
| 1101 |
| CBAUDEX); /* clear current buad rate */ |
| 1102 |
|
| 1103 |
tty->termios.c_cflag |= CS8; /* character size 8 bits */ |
| 1104 |
|
| 1105 |
/* baud rate 115200 */ |
| 1106 |
tty_encode_baud_rate(tty, 115200, 115200); |
| 1107 |
} |
| 1108 |
|
| 1109 |
static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb) |
| 1110 |
{ |
| 1111 |
int result; |
| 1112 |
/* We are done with this URB, resubmit it. Prep the USB to wait for |
| 1113 |
* another frame */ |
| 1114 |
usb_fill_bulk_urb(urb, serial->parent->usb, |
| 1115 |
usb_rcvbulkpipe(serial->parent->usb, |
| 1116 |
serial->in_endp-> |
| 1117 |
bEndpointAddress & 0x7F), |
| 1118 |
urb->transfer_buffer, serial->rx_data_length, |
| 1119 |
hso_std_serial_read_bulk_callback, serial); |
| 1120 |
/* Give this to the USB subsystem so it can tell us when more data |
| 1121 |
* arrives. */ |
| 1122 |
result = usb_submit_urb(urb, GFP_ATOMIC); |
| 1123 |
if (result) { |
| 1124 |
dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n", |
| 1125 |
__func__, result); |
| 1126 |
} |
| 1127 |
} |
| 1128 |
|
| 1129 |
|
| 1130 |
|
| 1131 |
|
| 1132 |
static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial) |
| 1133 |
{ |
| 1134 |
int count; |
| 1135 |
struct urb *curr_urb; |
| 1136 |
|
| 1137 |
while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) { |
| 1138 |
curr_urb = serial->rx_urb[serial->curr_rx_urb_idx]; |
| 1139 |
count = put_rxbuf_data(curr_urb, serial); |
| 1140 |
if (count == -1) |
| 1141 |
return; |
| 1142 |
if (count == 0) { |
| 1143 |
serial->curr_rx_urb_idx++; |
| 1144 |
if (serial->curr_rx_urb_idx >= serial->num_rx_urbs) |
| 1145 |
serial->curr_rx_urb_idx = 0; |
| 1146 |
hso_resubmit_rx_bulk_urb(serial, curr_urb); |
| 1147 |
} |
| 1148 |
} |
| 1149 |
} |
| 1150 |
|
| 1151 |
static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial) |
| 1152 |
{ |
| 1153 |
int count = 0; |
| 1154 |
struct urb *urb; |
| 1155 |
|
| 1156 |
urb = serial->rx_urb[0]; |
| 1157 |
if (serial->port.count > 0) { |
| 1158 |
count = put_rxbuf_data(urb, serial); |
| 1159 |
if (count == -1) |
| 1160 |
return; |
| 1161 |
} |
| 1162 |
/* Re issue a read as long as we receive data. */ |
| 1163 |
|
| 1164 |
if (count == 0 && ((urb->actual_length != 0) || |
| 1165 |
(serial->rx_state == RX_PENDING))) { |
| 1166 |
serial->rx_state = RX_SENT; |
| 1167 |
hso_mux_serial_read(serial); |
| 1168 |
} else |
| 1169 |
serial->rx_state = RX_IDLE; |
| 1170 |
} |
| 1171 |
|
| 1172 |
|
| 1173 |
/* read callback for Diag and CS port */ |
| 1174 |
static void hso_std_serial_read_bulk_callback(struct urb *urb) |
| 1175 |
{ |
| 1176 |
struct hso_serial *serial = urb->context; |
| 1177 |
int status = urb->status; |
| 1178 |
unsigned long flags; |
| 1179 |
|
| 1180 |
hso_dbg(0x8, "--- Got serial_read_bulk callback %02x ---\n", status); |
| 1181 |
|
| 1182 |
/* sanity check */ |
| 1183 |
if (!serial) { |
| 1184 |
hso_dbg(0x1, "serial == NULL\n"); |
| 1185 |
return; |
| 1186 |
} |
| 1187 |
if (status) { |
| 1188 |
handle_usb_error(status, __func__, serial->parent); |
| 1189 |
return; |
| 1190 |
} |
| 1191 |
|
| 1192 |
hso_dbg(0x1, "Actual length = %d\n", urb->actual_length); |
| 1193 |
DUMP1(urb->transfer_buffer, urb->actual_length); |
| 1194 |
|
| 1195 |
/* Anyone listening? */ |
| 1196 |
if (serial->port.count == 0) |
| 1197 |
return; |
| 1198 |
|
| 1199 |
if (serial->parent->port_spec & HSO_INFO_CRC_BUG) |
| 1200 |
fix_crc_bug(urb, serial->in_endp->wMaxPacketSize); |
| 1201 |
/* Valid data, handle RX data */ |
| 1202 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1203 |
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1; |
| 1204 |
put_rxbuf_data_and_resubmit_bulk_urb(serial); |
| 1205 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1206 |
} |
| 1207 |
|
| 1208 |
/* |
| 1209 |
* This needs to be a tasklet otherwise we will |
| 1210 |
* end up recursively calling this function. |
| 1211 |
*/ |
| 1212 |
static void hso_unthrottle_tasklet(struct tasklet_struct *t) |
| 1213 |
{ |
| 1214 |
struct hso_serial *serial = from_tasklet(serial, t, |
| 1215 |
unthrottle_tasklet); |
| 1216 |
unsigned long flags; |
| 1217 |
|
| 1218 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1219 |
if ((serial->parent->port_spec & HSO_INTF_MUX)) |
| 1220 |
put_rxbuf_data_and_resubmit_ctrl_urb(serial); |
| 1221 |
else |
| 1222 |
put_rxbuf_data_and_resubmit_bulk_urb(serial); |
| 1223 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1224 |
} |
| 1225 |
|
| 1226 |
static void hso_unthrottle(struct tty_struct *tty) |
| 1227 |
{ |
| 1228 |
struct hso_serial *serial = tty->driver_data; |
| 1229 |
|
| 1230 |
tasklet_hi_schedule(&serial->unthrottle_tasklet); |
| 1231 |
} |
| 1232 |
|
| 1233 |
/* open the requested serial port */ |
| 1234 |
static int hso_serial_open(struct tty_struct *tty, struct file *filp) |
| 1235 |
{ |
| 1236 |
struct hso_serial *serial = get_serial_by_index(tty->index); |
| 1237 |
int result; |
| 1238 |
|
| 1239 |
/* sanity check */ |
| 1240 |
if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) { |
| 1241 |
WARN_ON(1); |
| 1242 |
tty->driver_data = NULL; |
| 1243 |
hso_dbg(0x1, "Failed to open port\n"); |
| 1244 |
return -ENODEV; |
| 1245 |
} |
| 1246 |
|
| 1247 |
mutex_lock(&serial->parent->mutex); |
| 1248 |
result = usb_autopm_get_interface(serial->parent->interface); |
| 1249 |
if (result < 0) |
| 1250 |
goto err_out; |
| 1251 |
|
| 1252 |
hso_dbg(0x1, "Opening %d\n", serial->minor); |
| 1253 |
|
| 1254 |
/* setup */ |
| 1255 |
tty->driver_data = serial; |
| 1256 |
tty_port_tty_set(&serial->port, tty); |
| 1257 |
|
| 1258 |
/* check for port already opened, if not set the termios */ |
| 1259 |
serial->port.count++; |
| 1260 |
if (serial->port.count == 1) { |
| 1261 |
serial->rx_state = RX_IDLE; |
| 1262 |
/* Force default termio settings */ |
| 1263 |
_hso_serial_set_termios(tty); |
| 1264 |
tasklet_setup(&serial->unthrottle_tasklet, |
| 1265 |
hso_unthrottle_tasklet); |
| 1266 |
result = hso_start_serial_device(serial->parent, GFP_KERNEL); |
| 1267 |
if (result) { |
| 1268 |
hso_stop_serial_device(serial->parent); |
| 1269 |
serial->port.count--; |
| 1270 |
} else { |
| 1271 |
kref_get(&serial->parent->ref); |
| 1272 |
} |
| 1273 |
} else { |
| 1274 |
hso_dbg(0x1, "Port was already open\n"); |
| 1275 |
} |
| 1276 |
|
| 1277 |
usb_autopm_put_interface(serial->parent->interface); |
| 1278 |
|
| 1279 |
/* done */ |
| 1280 |
if (result) |
| 1281 |
hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0); |
| 1282 |
err_out: |
| 1283 |
mutex_unlock(&serial->parent->mutex); |
| 1284 |
return result; |
| 1285 |
} |
| 1286 |
|
| 1287 |
/* close the requested serial port */ |
| 1288 |
static void hso_serial_close(struct tty_struct *tty, struct file *filp) |
| 1289 |
{ |
| 1290 |
struct hso_serial *serial = tty->driver_data; |
| 1291 |
u8 usb_gone; |
| 1292 |
|
| 1293 |
hso_dbg(0x1, "Closing serial port\n"); |
| 1294 |
|
| 1295 |
/* Open failed, no close cleanup required */ |
| 1296 |
if (serial == NULL) |
| 1297 |
return; |
| 1298 |
|
| 1299 |
mutex_lock(&serial->parent->mutex); |
| 1300 |
usb_gone = serial->parent->usb_gone; |
| 1301 |
|
| 1302 |
if (!usb_gone) |
| 1303 |
usb_autopm_get_interface(serial->parent->interface); |
| 1304 |
|
| 1305 |
/* reset the rts and dtr */ |
| 1306 |
/* do the actual close */ |
| 1307 |
serial->port.count--; |
| 1308 |
|
| 1309 |
if (serial->port.count <= 0) { |
| 1310 |
serial->port.count = 0; |
| 1311 |
tty_port_tty_set(&serial->port, NULL); |
| 1312 |
if (!usb_gone) |
| 1313 |
hso_stop_serial_device(serial->parent); |
| 1314 |
tasklet_kill(&serial->unthrottle_tasklet); |
| 1315 |
} |
| 1316 |
|
| 1317 |
if (!usb_gone) |
| 1318 |
usb_autopm_put_interface(serial->parent->interface); |
| 1319 |
|
| 1320 |
mutex_unlock(&serial->parent->mutex); |
| 1321 |
} |
| 1322 |
|
| 1323 |
/* close the requested serial port */ |
| 1324 |
static ssize_t hso_serial_write(struct tty_struct *tty, const u8 *buf, |
| 1325 |
size_t count) |
| 1326 |
{ |
| 1327 |
struct hso_serial *serial = tty->driver_data; |
| 1328 |
unsigned long flags; |
| 1329 |
|
| 1330 |
/* sanity check */ |
| 1331 |
if (serial == NULL) { |
| 1332 |
pr_err("%s: serial is NULL\n", __func__); |
| 1333 |
return -ENODEV; |
| 1334 |
} |
| 1335 |
|
| 1336 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1337 |
|
| 1338 |
count = min_t(size_t, serial->tx_data_length - serial->tx_buffer_count, |
| 1339 |
count); |
| 1340 |
memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, count); |
| 1341 |
serial->tx_buffer_count += count; |
| 1342 |
|
| 1343 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1344 |
|
| 1345 |
hso_kick_transmit(serial); |
| 1346 |
/* done */ |
| 1347 |
return count; |
| 1348 |
} |
| 1349 |
|
| 1350 |
/* how much room is there for writing */ |
| 1351 |
static unsigned int hso_serial_write_room(struct tty_struct *tty) |
| 1352 |
{ |
| 1353 |
struct hso_serial *serial = tty->driver_data; |
| 1354 |
unsigned int room; |
| 1355 |
unsigned long flags; |
| 1356 |
|
| 1357 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1358 |
room = serial->tx_data_length - serial->tx_buffer_count; |
| 1359 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1360 |
|
| 1361 |
/* return free room */ |
| 1362 |
return room; |
| 1363 |
} |
| 1364 |
|
| 1365 |
static void hso_serial_cleanup(struct tty_struct *tty) |
| 1366 |
{ |
| 1367 |
struct hso_serial *serial = tty->driver_data; |
| 1368 |
|
| 1369 |
if (!serial) |
| 1370 |
return; |
| 1371 |
|
| 1372 |
kref_put(&serial->parent->ref, hso_serial_ref_free); |
| 1373 |
} |
| 1374 |
|
| 1375 |
/* setup the term */ |
| 1376 |
static void hso_serial_set_termios(struct tty_struct *tty, |
| 1377 |
const struct ktermios *old) |
| 1378 |
{ |
| 1379 |
struct hso_serial *serial = tty->driver_data; |
| 1380 |
unsigned long flags; |
| 1381 |
|
| 1382 |
if (old) |
| 1383 |
hso_dbg(0x16, "Termios called with: cflags new[%u] - old[%u]\n", |
| 1384 |
(unsigned int)tty->termios.c_cflag, |
| 1385 |
(unsigned int)old->c_cflag); |
| 1386 |
|
| 1387 |
/* the actual setup */ |
| 1388 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1389 |
if (serial->port.count) |
| 1390 |
_hso_serial_set_termios(tty); |
| 1391 |
else |
| 1392 |
tty->termios = *old; |
| 1393 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1394 |
|
| 1395 |
/* done */ |
| 1396 |
} |
| 1397 |
|
| 1398 |
/* how many characters in the buffer */ |
| 1399 |
static unsigned int hso_serial_chars_in_buffer(struct tty_struct *tty) |
| 1400 |
{ |
| 1401 |
struct hso_serial *serial = tty->driver_data; |
| 1402 |
unsigned long flags; |
| 1403 |
unsigned int chars; |
| 1404 |
|
| 1405 |
/* sanity check */ |
| 1406 |
if (serial == NULL) |
| 1407 |
return 0; |
| 1408 |
|
| 1409 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1410 |
chars = serial->tx_buffer_count; |
| 1411 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1412 |
|
| 1413 |
return chars; |
| 1414 |
} |
| 1415 |
static int tiocmget_submit_urb(struct hso_serial *serial, |
| 1416 |
struct hso_tiocmget *tiocmget, |
| 1417 |
struct usb_device *usb) |
| 1418 |
{ |
| 1419 |
int result; |
| 1420 |
|
| 1421 |
if (serial->parent->usb_gone) |
| 1422 |
return -ENODEV; |
| 1423 |
usb_fill_int_urb(tiocmget->urb, usb, |
| 1424 |
usb_rcvintpipe(usb, |
| 1425 |
tiocmget->endp-> |
| 1426 |
bEndpointAddress & 0x7F), |
| 1427 |
tiocmget->serial_state_notification, |
| 1428 |
sizeof(struct hso_serial_state_notification), |
| 1429 |
tiocmget_intr_callback, serial, |
| 1430 |
tiocmget->endp->bInterval); |
| 1431 |
result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC); |
| 1432 |
if (result) { |
| 1433 |
dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__, |
| 1434 |
result); |
| 1435 |
} |
| 1436 |
return result; |
| 1437 |
|
| 1438 |
} |
| 1439 |
|
| 1440 |
static void tiocmget_intr_callback(struct urb *urb) |
| 1441 |
{ |
| 1442 |
struct hso_serial *serial = urb->context; |
| 1443 |
struct hso_tiocmget *tiocmget; |
| 1444 |
int status = urb->status; |
| 1445 |
u16 UART_state_bitmap, prev_UART_state_bitmap; |
| 1446 |
struct uart_icount *icount; |
| 1447 |
struct hso_serial_state_notification *serial_state_notification; |
| 1448 |
struct usb_device *usb; |
| 1449 |
struct usb_interface *interface; |
| 1450 |
int if_num; |
| 1451 |
|
| 1452 |
/* Sanity checks */ |
| 1453 |
if (!serial) |
| 1454 |
return; |
| 1455 |
if (status) { |
| 1456 |
handle_usb_error(status, __func__, serial->parent); |
| 1457 |
return; |
| 1458 |
} |
| 1459 |
|
| 1460 |
/* tiocmget is only supported on HSO_PORT_MODEM */ |
| 1461 |
tiocmget = serial->tiocmget; |
| 1462 |
if (!tiocmget) |
| 1463 |
return; |
| 1464 |
BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM); |
| 1465 |
|
| 1466 |
usb = serial->parent->usb; |
| 1467 |
interface = serial->parent->interface; |
| 1468 |
|
| 1469 |
if_num = interface->cur_altsetting->desc.bInterfaceNumber; |
| 1470 |
|
| 1471 |
/* wIndex should be the USB interface number of the port to which the |
| 1472 |
* notification applies, which should always be the Modem port. |
| 1473 |
*/ |
| 1474 |
serial_state_notification = tiocmget->serial_state_notification; |
| 1475 |
if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || |
| 1476 |
serial_state_notification->bNotification != B_NOTIFICATION || |
| 1477 |
le16_to_cpu(serial_state_notification->wValue) != W_VALUE || |
| 1478 |
le16_to_cpu(serial_state_notification->wIndex) != if_num || |
| 1479 |
le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) { |
| 1480 |
dev_warn(&usb->dev, |
| 1481 |
"hso received invalid serial state notification\n"); |
| 1482 |
DUMP(serial_state_notification, |
| 1483 |
sizeof(struct hso_serial_state_notification)); |
| 1484 |
} else { |
| 1485 |
unsigned long flags; |
| 1486 |
|
| 1487 |
UART_state_bitmap = le16_to_cpu(serial_state_notification-> |
| 1488 |
UART_state_bitmap); |
| 1489 |
prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap; |
| 1490 |
icount = &tiocmget->icount; |
| 1491 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1492 |
if ((UART_state_bitmap & B_OVERRUN) != |
| 1493 |
(prev_UART_state_bitmap & B_OVERRUN)) |
| 1494 |
icount->parity++; |
| 1495 |
if ((UART_state_bitmap & B_PARITY) != |
| 1496 |
(prev_UART_state_bitmap & B_PARITY)) |
| 1497 |
icount->parity++; |
| 1498 |
if ((UART_state_bitmap & B_FRAMING) != |
| 1499 |
(prev_UART_state_bitmap & B_FRAMING)) |
| 1500 |
icount->frame++; |
| 1501 |
if ((UART_state_bitmap & B_RING_SIGNAL) && |
| 1502 |
!(prev_UART_state_bitmap & B_RING_SIGNAL)) |
| 1503 |
icount->rng++; |
| 1504 |
if ((UART_state_bitmap & B_BREAK) != |
| 1505 |
(prev_UART_state_bitmap & B_BREAK)) |
| 1506 |
icount->brk++; |
| 1507 |
if ((UART_state_bitmap & B_TX_CARRIER) != |
| 1508 |
(prev_UART_state_bitmap & B_TX_CARRIER)) |
| 1509 |
icount->dsr++; |
| 1510 |
if ((UART_state_bitmap & B_RX_CARRIER) != |
| 1511 |
(prev_UART_state_bitmap & B_RX_CARRIER)) |
| 1512 |
icount->dcd++; |
| 1513 |
tiocmget->prev_UART_state_bitmap = UART_state_bitmap; |
| 1514 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1515 |
tiocmget->intr_completed = 1; |
| 1516 |
wake_up_interruptible(&tiocmget->waitq); |
| 1517 |
} |
| 1518 |
memset(serial_state_notification, 0, |
| 1519 |
sizeof(struct hso_serial_state_notification)); |
| 1520 |
tiocmget_submit_urb(serial, |
| 1521 |
tiocmget, |
| 1522 |
serial->parent->usb); |
| 1523 |
} |
| 1524 |
|
| 1525 |
/* |
| 1526 |
* next few functions largely stolen from drivers/serial/serial_core.c |
| 1527 |
*/ |
| 1528 |
/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change |
| 1529 |
* - mask passed in arg for lines of interest |
| 1530 |
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) |
| 1531 |
* Caller should use TIOCGICOUNT to see which one it was |
| 1532 |
*/ |
| 1533 |
static int |
| 1534 |
hso_wait_modem_status(struct hso_serial *serial, unsigned long arg) |
| 1535 |
{ |
| 1536 |
DECLARE_WAITQUEUE(wait, current); |
| 1537 |
struct uart_icount cprev, cnow; |
| 1538 |
struct hso_tiocmget *tiocmget; |
| 1539 |
int ret; |
| 1540 |
|
| 1541 |
tiocmget = serial->tiocmget; |
| 1542 |
if (!tiocmget) |
| 1543 |
return -ENOENT; |
| 1544 |
/* |
| 1545 |
* note the counters on entry |
| 1546 |
*/ |
| 1547 |
spin_lock_irq(&serial->serial_lock); |
| 1548 |
memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount)); |
| 1549 |
spin_unlock_irq(&serial->serial_lock); |
| 1550 |
add_wait_queue(&tiocmget->waitq, &wait); |
| 1551 |
for (;;) { |
| 1552 |
spin_lock_irq(&serial->serial_lock); |
| 1553 |
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount)); |
| 1554 |
spin_unlock_irq(&serial->serial_lock); |
| 1555 |
set_current_state(TASK_INTERRUPTIBLE); |
| 1556 |
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || |
| 1557 |
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || |
| 1558 |
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd))) { |
| 1559 |
ret = 0; |
| 1560 |
break; |
| 1561 |
} |
| 1562 |
schedule(); |
| 1563 |
/* see if a signal did it */ |
| 1564 |
if (signal_pending(current)) { |
| 1565 |
ret = -ERESTARTSYS; |
| 1566 |
break; |
| 1567 |
} |
| 1568 |
cprev = cnow; |
| 1569 |
} |
| 1570 |
__set_current_state(TASK_RUNNING); |
| 1571 |
remove_wait_queue(&tiocmget->waitq, &wait); |
| 1572 |
|
| 1573 |
return ret; |
| 1574 |
} |
| 1575 |
|
| 1576 |
/* |
| 1577 |
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS) |
| 1578 |
* Return: write counters to the user passed counter struct |
| 1579 |
* NB: both 1->0 and 0->1 transitions are counted except for |
| 1580 |
* RI where only 0->1 is counted. |
| 1581 |
*/ |
| 1582 |
static int hso_get_count(struct tty_struct *tty, |
| 1583 |
struct serial_icounter_struct *icount) |
| 1584 |
{ |
| 1585 |
struct uart_icount cnow; |
| 1586 |
struct hso_serial *serial = tty->driver_data; |
| 1587 |
struct hso_tiocmget *tiocmget = serial->tiocmget; |
| 1588 |
|
| 1589 |
memset(icount, 0, sizeof(struct serial_icounter_struct)); |
| 1590 |
|
| 1591 |
if (!tiocmget) |
| 1592 |
return -ENOENT; |
| 1593 |
spin_lock_irq(&serial->serial_lock); |
| 1594 |
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount)); |
| 1595 |
spin_unlock_irq(&serial->serial_lock); |
| 1596 |
|
| 1597 |
icount->cts = cnow.cts; |
| 1598 |
icount->dsr = cnow.dsr; |
| 1599 |
icount->rng = cnow.rng; |
| 1600 |
icount->dcd = cnow.dcd; |
| 1601 |
icount->rx = cnow.rx; |
| 1602 |
icount->tx = cnow.tx; |
| 1603 |
icount->frame = cnow.frame; |
| 1604 |
icount->overrun = cnow.overrun; |
| 1605 |
icount->parity = cnow.parity; |
| 1606 |
icount->brk = cnow.brk; |
| 1607 |
icount->buf_overrun = cnow.buf_overrun; |
| 1608 |
|
| 1609 |
return 0; |
| 1610 |
} |
| 1611 |
|
| 1612 |
|
| 1613 |
static int hso_serial_tiocmget(struct tty_struct *tty) |
| 1614 |
{ |
| 1615 |
int retval; |
| 1616 |
struct hso_serial *serial = tty->driver_data; |
| 1617 |
struct hso_tiocmget *tiocmget; |
| 1618 |
u16 UART_state_bitmap; |
| 1619 |
|
| 1620 |
/* sanity check */ |
| 1621 |
if (!serial) { |
| 1622 |
hso_dbg(0x1, "no tty structures\n"); |
| 1623 |
return -EINVAL; |
| 1624 |
} |
| 1625 |
spin_lock_irq(&serial->serial_lock); |
| 1626 |
retval = ((serial->rts_state) ? TIOCM_RTS : 0) | |
| 1627 |
((serial->dtr_state) ? TIOCM_DTR : 0); |
| 1628 |
tiocmget = serial->tiocmget; |
| 1629 |
if (tiocmget) { |
| 1630 |
|
| 1631 |
UART_state_bitmap = le16_to_cpu( |
| 1632 |
tiocmget->prev_UART_state_bitmap); |
| 1633 |
if (UART_state_bitmap & B_RING_SIGNAL) |
| 1634 |
retval |= TIOCM_RNG; |
| 1635 |
if (UART_state_bitmap & B_RX_CARRIER) |
| 1636 |
retval |= TIOCM_CD; |
| 1637 |
if (UART_state_bitmap & B_TX_CARRIER) |
| 1638 |
retval |= TIOCM_DSR; |
| 1639 |
} |
| 1640 |
spin_unlock_irq(&serial->serial_lock); |
| 1641 |
return retval; |
| 1642 |
} |
| 1643 |
|
| 1644 |
static int hso_serial_tiocmset(struct tty_struct *tty, |
| 1645 |
unsigned int set, unsigned int clear) |
| 1646 |
{ |
| 1647 |
int val = 0; |
| 1648 |
unsigned long flags; |
| 1649 |
int if_num; |
| 1650 |
struct hso_serial *serial = tty->driver_data; |
| 1651 |
struct usb_interface *interface; |
| 1652 |
|
| 1653 |
/* sanity check */ |
| 1654 |
if (!serial) { |
| 1655 |
hso_dbg(0x1, "no tty structures\n"); |
| 1656 |
return -EINVAL; |
| 1657 |
} |
| 1658 |
|
| 1659 |
if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM) |
| 1660 |
return -EINVAL; |
| 1661 |
|
| 1662 |
interface = serial->parent->interface; |
| 1663 |
if_num = interface->cur_altsetting->desc.bInterfaceNumber; |
| 1664 |
|
| 1665 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1666 |
if (set & TIOCM_RTS) |
| 1667 |
serial->rts_state = 1; |
| 1668 |
if (set & TIOCM_DTR) |
| 1669 |
serial->dtr_state = 1; |
| 1670 |
|
| 1671 |
if (clear & TIOCM_RTS) |
| 1672 |
serial->rts_state = 0; |
| 1673 |
if (clear & TIOCM_DTR) |
| 1674 |
serial->dtr_state = 0; |
| 1675 |
|
| 1676 |
if (serial->dtr_state) |
| 1677 |
val |= 0x01; |
| 1678 |
if (serial->rts_state) |
| 1679 |
val |= 0x02; |
| 1680 |
|
| 1681 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1682 |
|
| 1683 |
return usb_control_msg(serial->parent->usb, |
| 1684 |
usb_sndctrlpipe(serial->parent->usb, 0), 0x22, |
| 1685 |
0x21, val, if_num, NULL, 0, |
| 1686 |
USB_CTRL_SET_TIMEOUT); |
| 1687 |
} |
| 1688 |
|
| 1689 |
static int hso_serial_ioctl(struct tty_struct *tty, |
| 1690 |
unsigned int cmd, unsigned long arg) |
| 1691 |
{ |
| 1692 |
struct hso_serial *serial = tty->driver_data; |
| 1693 |
int ret = 0; |
| 1694 |
hso_dbg(0x8, "IOCTL cmd: %d, arg: %ld\n", cmd, arg); |
| 1695 |
|
| 1696 |
if (!serial) |
| 1697 |
return -ENODEV; |
| 1698 |
switch (cmd) { |
| 1699 |
case TIOCMIWAIT: |
| 1700 |
ret = hso_wait_modem_status(serial, arg); |
| 1701 |
break; |
| 1702 |
default: |
| 1703 |
ret = -ENOIOCTLCMD; |
| 1704 |
break; |
| 1705 |
} |
| 1706 |
return ret; |
| 1707 |
} |
| 1708 |
|
| 1709 |
|
| 1710 |
/* starts a transmit */ |
| 1711 |
static void hso_kick_transmit(struct hso_serial *serial) |
| 1712 |
{ |
| 1713 |
unsigned long flags; |
| 1714 |
int res; |
| 1715 |
|
| 1716 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1717 |
if (!serial->tx_buffer_count) |
| 1718 |
goto out; |
| 1719 |
|
| 1720 |
if (serial->tx_urb_used) |
| 1721 |
goto out; |
| 1722 |
|
| 1723 |
/* Wakeup USB interface if necessary */ |
| 1724 |
if (hso_get_activity(serial->parent) == -EAGAIN) |
| 1725 |
goto out; |
| 1726 |
|
| 1727 |
/* Switch pointers around to avoid memcpy */ |
| 1728 |
swap(serial->tx_buffer, serial->tx_data); |
| 1729 |
serial->tx_data_count = serial->tx_buffer_count; |
| 1730 |
serial->tx_buffer_count = 0; |
| 1731 |
|
| 1732 |
/* If serial->tx_data is set, it means we switched buffers */ |
| 1733 |
if (serial->tx_data && serial->write_data) { |
| 1734 |
res = serial->write_data(serial); |
| 1735 |
if (res >= 0) |
| 1736 |
serial->tx_urb_used = 1; |
| 1737 |
} |
| 1738 |
out: |
| 1739 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1740 |
} |
| 1741 |
|
| 1742 |
/* make a request (for reading and writing data to muxed serial port) */ |
| 1743 |
static int mux_device_request(struct hso_serial *serial, u8 type, u16 port, |
| 1744 |
struct urb *ctrl_urb, |
| 1745 |
struct usb_ctrlrequest *ctrl_req, |
| 1746 |
u8 *ctrl_urb_data, u32 size) |
| 1747 |
{ |
| 1748 |
int result; |
| 1749 |
int pipe; |
| 1750 |
|
| 1751 |
/* Sanity check */ |
| 1752 |
if (!serial || !ctrl_urb || !ctrl_req) { |
| 1753 |
pr_err("%s: Wrong arguments\n", __func__); |
| 1754 |
return -EINVAL; |
| 1755 |
} |
| 1756 |
|
| 1757 |
/* initialize */ |
| 1758 |
ctrl_req->wValue = 0; |
| 1759 |
ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port)); |
| 1760 |
ctrl_req->wLength = cpu_to_le16(size); |
| 1761 |
|
| 1762 |
if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) { |
| 1763 |
/* Reading command */ |
| 1764 |
ctrl_req->bRequestType = USB_DIR_IN | |
| 1765 |
USB_TYPE_OPTION_VENDOR | |
| 1766 |
USB_RECIP_INTERFACE; |
| 1767 |
ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; |
| 1768 |
pipe = usb_rcvctrlpipe(serial->parent->usb, 0); |
| 1769 |
} else { |
| 1770 |
/* Writing command */ |
| 1771 |
ctrl_req->bRequestType = USB_DIR_OUT | |
| 1772 |
USB_TYPE_OPTION_VENDOR | |
| 1773 |
USB_RECIP_INTERFACE; |
| 1774 |
ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND; |
| 1775 |
pipe = usb_sndctrlpipe(serial->parent->usb, 0); |
| 1776 |
} |
| 1777 |
/* syslog */ |
| 1778 |
hso_dbg(0x2, "%s command (%02x) len: %d, port: %d\n", |
| 1779 |
type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write", |
| 1780 |
ctrl_req->bRequestType, ctrl_req->wLength, port); |
| 1781 |
|
| 1782 |
/* Load ctrl urb */ |
| 1783 |
ctrl_urb->transfer_flags = 0; |
| 1784 |
usb_fill_control_urb(ctrl_urb, |
| 1785 |
serial->parent->usb, |
| 1786 |
pipe, |
| 1787 |
(u8 *) ctrl_req, |
| 1788 |
ctrl_urb_data, size, ctrl_callback, serial); |
| 1789 |
/* Send it on merry way */ |
| 1790 |
result = usb_submit_urb(ctrl_urb, GFP_ATOMIC); |
| 1791 |
if (result) { |
| 1792 |
dev_err(&ctrl_urb->dev->dev, |
| 1793 |
"%s failed submit ctrl_urb %d type %d\n", __func__, |
| 1794 |
result, type); |
| 1795 |
return result; |
| 1796 |
} |
| 1797 |
|
| 1798 |
/* done */ |
| 1799 |
return size; |
| 1800 |
} |
| 1801 |
|
| 1802 |
/* called by intr_callback when read occurs */ |
| 1803 |
static int hso_mux_serial_read(struct hso_serial *serial) |
| 1804 |
{ |
| 1805 |
if (!serial) |
| 1806 |
return -EINVAL; |
| 1807 |
|
| 1808 |
/* clean data */ |
| 1809 |
memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE); |
| 1810 |
/* make the request */ |
| 1811 |
|
| 1812 |
if (serial->num_rx_urbs != 1) { |
| 1813 |
dev_err(&serial->parent->interface->dev, |
| 1814 |
"ERROR: mux'd reads with multiple buffers " |
| 1815 |
"not possible\n"); |
| 1816 |
return 0; |
| 1817 |
} |
| 1818 |
return mux_device_request(serial, |
| 1819 |
USB_CDC_GET_ENCAPSULATED_RESPONSE, |
| 1820 |
serial->parent->port_spec & HSO_PORT_MASK, |
| 1821 |
serial->rx_urb[0], |
| 1822 |
&serial->ctrl_req_rx, |
| 1823 |
serial->rx_data[0], serial->rx_data_length); |
| 1824 |
} |
| 1825 |
|
| 1826 |
/* used for muxed serial port callback (muxed serial read) */ |
| 1827 |
static void intr_callback(struct urb *urb) |
| 1828 |
{ |
| 1829 |
struct hso_shared_int *shared_int = urb->context; |
| 1830 |
struct hso_serial *serial; |
| 1831 |
unsigned char *port_req; |
| 1832 |
int status = urb->status; |
| 1833 |
unsigned long flags; |
| 1834 |
int i; |
| 1835 |
|
| 1836 |
usb_mark_last_busy(urb->dev); |
| 1837 |
|
| 1838 |
/* sanity check */ |
| 1839 |
if (!shared_int) |
| 1840 |
return; |
| 1841 |
|
| 1842 |
/* status check */ |
| 1843 |
if (status) { |
| 1844 |
handle_usb_error(status, __func__, NULL); |
| 1845 |
return; |
| 1846 |
} |
| 1847 |
hso_dbg(0x8, "--- Got intr callback 0x%02X ---\n", status); |
| 1848 |
|
| 1849 |
/* what request? */ |
| 1850 |
port_req = urb->transfer_buffer; |
| 1851 |
hso_dbg(0x8, "port_req = 0x%.2X\n", *port_req); |
| 1852 |
/* loop over all muxed ports to find the one sending this */ |
| 1853 |
for (i = 0; i < 8; i++) { |
| 1854 |
/* max 8 channels on MUX */ |
| 1855 |
if (*port_req & (1 << i)) { |
| 1856 |
serial = get_serial_by_shared_int_and_type(shared_int, |
| 1857 |
(1 << i)); |
| 1858 |
if (serial != NULL) { |
| 1859 |
hso_dbg(0x1, "Pending read interrupt on port %d\n", |
| 1860 |
i); |
| 1861 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1862 |
if (serial->rx_state == RX_IDLE && |
| 1863 |
serial->port.count > 0) { |
| 1864 |
/* Setup and send a ctrl req read on |
| 1865 |
* port i */ |
| 1866 |
if (!serial->rx_urb_filled[0]) { |
| 1867 |
serial->rx_state = RX_SENT; |
| 1868 |
hso_mux_serial_read(serial); |
| 1869 |
} else |
| 1870 |
serial->rx_state = RX_PENDING; |
| 1871 |
} else { |
| 1872 |
hso_dbg(0x1, "Already a read pending on port %d or port not open\n", |
| 1873 |
i); |
| 1874 |
} |
| 1875 |
spin_unlock_irqrestore(&serial->serial_lock, |
| 1876 |
flags); |
| 1877 |
} |
| 1878 |
} |
| 1879 |
} |
| 1880 |
/* Resubmit interrupt urb */ |
| 1881 |
hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC); |
| 1882 |
} |
| 1883 |
|
| 1884 |
/* called for writing to muxed serial port */ |
| 1885 |
static int hso_mux_serial_write_data(struct hso_serial *serial) |
| 1886 |
{ |
| 1887 |
if (NULL == serial) |
| 1888 |
return -EINVAL; |
| 1889 |
|
| 1890 |
return mux_device_request(serial, |
| 1891 |
USB_CDC_SEND_ENCAPSULATED_COMMAND, |
| 1892 |
serial->parent->port_spec & HSO_PORT_MASK, |
| 1893 |
serial->tx_urb, |
| 1894 |
&serial->ctrl_req_tx, |
| 1895 |
serial->tx_data, serial->tx_data_count); |
| 1896 |
} |
| 1897 |
|
| 1898 |
/* write callback for Diag and CS port */ |
| 1899 |
static void hso_std_serial_write_bulk_callback(struct urb *urb) |
| 1900 |
{ |
| 1901 |
struct hso_serial *serial = urb->context; |
| 1902 |
int status = urb->status; |
| 1903 |
unsigned long flags; |
| 1904 |
|
| 1905 |
/* sanity check */ |
| 1906 |
if (!serial) { |
| 1907 |
hso_dbg(0x1, "serial == NULL\n"); |
| 1908 |
return; |
| 1909 |
} |
| 1910 |
|
| 1911 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1912 |
serial->tx_urb_used = 0; |
| 1913 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1914 |
if (status) { |
| 1915 |
handle_usb_error(status, __func__, serial->parent); |
| 1916 |
return; |
| 1917 |
} |
| 1918 |
hso_put_activity(serial->parent); |
| 1919 |
tty_port_tty_wakeup(&serial->port); |
| 1920 |
hso_kick_transmit(serial); |
| 1921 |
|
| 1922 |
hso_dbg(0x1, "\n"); |
| 1923 |
} |
| 1924 |
|
| 1925 |
/* called for writing diag or CS serial port */ |
| 1926 |
static int hso_std_serial_write_data(struct hso_serial *serial) |
| 1927 |
{ |
| 1928 |
int count = serial->tx_data_count; |
| 1929 |
int result; |
| 1930 |
|
| 1931 |
usb_fill_bulk_urb(serial->tx_urb, |
| 1932 |
serial->parent->usb, |
| 1933 |
usb_sndbulkpipe(serial->parent->usb, |
| 1934 |
serial->out_endp-> |
| 1935 |
bEndpointAddress & 0x7F), |
| 1936 |
serial->tx_data, serial->tx_data_count, |
| 1937 |
hso_std_serial_write_bulk_callback, serial); |
| 1938 |
|
| 1939 |
result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC); |
| 1940 |
if (result) { |
| 1941 |
dev_warn(&serial->parent->usb->dev, |
| 1942 |
"Failed to submit urb - res %d\n", result); |
| 1943 |
return result; |
| 1944 |
} |
| 1945 |
|
| 1946 |
return count; |
| 1947 |
} |
| 1948 |
|
| 1949 |
/* callback after read or write on muxed serial port */ |
| 1950 |
static void ctrl_callback(struct urb *urb) |
| 1951 |
{ |
| 1952 |
struct hso_serial *serial = urb->context; |
| 1953 |
struct usb_ctrlrequest *req; |
| 1954 |
int status = urb->status; |
| 1955 |
unsigned long flags; |
| 1956 |
|
| 1957 |
/* sanity check */ |
| 1958 |
if (!serial) |
| 1959 |
return; |
| 1960 |
|
| 1961 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1962 |
serial->tx_urb_used = 0; |
| 1963 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1964 |
if (status) { |
| 1965 |
handle_usb_error(status, __func__, serial->parent); |
| 1966 |
return; |
| 1967 |
} |
| 1968 |
|
| 1969 |
/* what request? */ |
| 1970 |
req = (struct usb_ctrlrequest *)(urb->setup_packet); |
| 1971 |
hso_dbg(0x8, "--- Got muxed ctrl callback 0x%02X ---\n", status); |
| 1972 |
hso_dbg(0x8, "Actual length of urb = %d\n", urb->actual_length); |
| 1973 |
DUMP1(urb->transfer_buffer, urb->actual_length); |
| 1974 |
|
| 1975 |
if (req->bRequestType == |
| 1976 |
(USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) { |
| 1977 |
/* response to a read command */ |
| 1978 |
serial->rx_urb_filled[0] = 1; |
| 1979 |
spin_lock_irqsave(&serial->serial_lock, flags); |
| 1980 |
put_rxbuf_data_and_resubmit_ctrl_urb(serial); |
| 1981 |
spin_unlock_irqrestore(&serial->serial_lock, flags); |
| 1982 |
} else { |
| 1983 |
hso_put_activity(serial->parent); |
| 1984 |
tty_port_tty_wakeup(&serial->port); |
| 1985 |
/* response to a write command */ |
| 1986 |
hso_kick_transmit(serial); |
| 1987 |
} |
| 1988 |
} |
| 1989 |
|
| 1990 |
/* handle RX data for serial port */ |
| 1991 |
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) |
| 1992 |
{ |
| 1993 |
struct tty_struct *tty; |
| 1994 |
int count; |
| 1995 |
|
| 1996 |
/* Sanity check */ |
| 1997 |
if (urb == NULL || serial == NULL) { |
| 1998 |
hso_dbg(0x1, "serial = NULL\n"); |
| 1999 |
return -2; |
| 2000 |
} |
| 2001 |
|
| 2002 |
tty = tty_port_tty_get(&serial->port); |
| 2003 |
|
| 2004 |
if (tty && tty_throttled(tty)) { |
| 2005 |
tty_kref_put(tty); |
| 2006 |
return -1; |
| 2007 |
} |
| 2008 |
|
| 2009 |
/* Push data to tty */ |
| 2010 |
hso_dbg(0x1, "data to push to tty\n"); |
| 2011 |
count = tty_buffer_request_room(&serial->port, urb->actual_length); |
| 2012 |
if (count >= urb->actual_length) { |
| 2013 |
tty_insert_flip_string(&serial->port, urb->transfer_buffer, |
| 2014 |
urb->actual_length); |
| 2015 |
tty_flip_buffer_push(&serial->port); |
| 2016 |
} else { |
| 2017 |
dev_warn(&serial->parent->usb->dev, |
| 2018 |
"dropping data, %d bytes lost\n", urb->actual_length); |
| 2019 |
} |
| 2020 |
|
| 2021 |
tty_kref_put(tty); |
| 2022 |
|
| 2023 |
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; |
| 2024 |
|
| 2025 |
return 0; |
| 2026 |
} |
| 2027 |
|
| 2028 |
|
| 2029 |
/* Base driver functions */ |
| 2030 |
|
| 2031 |
static void hso_log_port(struct hso_device *hso_dev) |
| 2032 |
{ |
| 2033 |
char *port_type; |
| 2034 |
char port_dev[20]; |
| 2035 |
|
| 2036 |
switch (hso_dev->port_spec & HSO_PORT_MASK) { |
| 2037 |
case HSO_PORT_CONTROL: |
| 2038 |
port_type = "Control"; |
| 2039 |
break; |
| 2040 |
case HSO_PORT_APP: |
| 2041 |
port_type = "Application"; |
| 2042 |
break; |
| 2043 |
case HSO_PORT_GPS: |
| 2044 |
port_type = "GPS"; |
| 2045 |
break; |
| 2046 |
case HSO_PORT_GPS_CONTROL: |
| 2047 |
port_type = "GPS control"; |
| 2048 |
break; |
| 2049 |
case HSO_PORT_APP2: |
| 2050 |
port_type = "Application2"; |
| 2051 |
break; |
| 2052 |
case HSO_PORT_PCSC: |
| 2053 |
port_type = "PCSC"; |
| 2054 |
break; |
| 2055 |
case HSO_PORT_DIAG: |
| 2056 |
port_type = "Diagnostic"; |
| 2057 |
break; |
| 2058 |
case HSO_PORT_DIAG2: |
| 2059 |
port_type = "Diagnostic2"; |
| 2060 |
break; |
| 2061 |
case HSO_PORT_MODEM: |
| 2062 |
port_type = "Modem"; |
| 2063 |
break; |
| 2064 |
case HSO_PORT_NETWORK: |
| 2065 |
port_type = "Network"; |
| 2066 |
break; |
| 2067 |
default: |
| 2068 |
port_type = "Unknown"; |
| 2069 |
break; |
| 2070 |
} |
| 2071 |
if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { |
| 2072 |
sprintf(port_dev, "%s", dev2net(hso_dev)->net->name); |
| 2073 |
} else |
| 2074 |
sprintf(port_dev, "/dev/%s%d", tty_filename, |
| 2075 |
dev2ser(hso_dev)->minor); |
| 2076 |
|
| 2077 |
dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n", |
| 2078 |
port_type, port_dev); |
| 2079 |
} |
| 2080 |
|
| 2081 |
static int hso_start_net_device(struct hso_device *hso_dev) |
| 2082 |
{ |
| 2083 |
int i, result = 0; |
| 2084 |
struct hso_net *hso_net = dev2net(hso_dev); |
| 2085 |
|
| 2086 |
if (!hso_net) |
| 2087 |
return -ENODEV; |
| 2088 |
|
| 2089 |
/* send URBs for all read buffers */ |
| 2090 |
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { |
| 2091 |
|
| 2092 |
/* Prep a receive URB */ |
| 2093 |
usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i], |
| 2094 |
hso_dev->usb, |
| 2095 |
usb_rcvbulkpipe(hso_dev->usb, |
| 2096 |
hso_net->in_endp-> |
| 2097 |
bEndpointAddress & 0x7F), |
| 2098 |
hso_net->mux_bulk_rx_buf_pool[i], |
| 2099 |
MUX_BULK_RX_BUF_SIZE, read_bulk_callback, |
| 2100 |
hso_net); |
| 2101 |
|
| 2102 |
/* Put it out there so the device can send us stuff */ |
| 2103 |
result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i], |
| 2104 |
GFP_NOIO); |
| 2105 |
if (result) |
| 2106 |
dev_warn(&hso_dev->usb->dev, |
| 2107 |
"%s failed mux_bulk_rx_urb[%d] %d\n", __func__, |
| 2108 |
i, result); |
| 2109 |
} |
| 2110 |
|
| 2111 |
return result; |
| 2112 |
} |
| 2113 |
|
| 2114 |
static int hso_stop_net_device(struct hso_device *hso_dev) |
| 2115 |
{ |
| 2116 |
int i; |
| 2117 |
struct hso_net *hso_net = dev2net(hso_dev); |
| 2118 |
|
| 2119 |
if (!hso_net) |
| 2120 |
return -ENODEV; |
| 2121 |
|
| 2122 |
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { |
| 2123 |
if (hso_net->mux_bulk_rx_urb_pool[i]) |
| 2124 |
usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]); |
| 2125 |
|
| 2126 |
} |
| 2127 |
if (hso_net->mux_bulk_tx_urb) |
| 2128 |
usb_kill_urb(hso_net->mux_bulk_tx_urb); |
| 2129 |
|
| 2130 |
return 0; |
| 2131 |
} |
| 2132 |
|
| 2133 |
static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags) |
| 2134 |
{ |
| 2135 |
int i, result = 0; |
| 2136 |
struct hso_serial *serial = dev2ser(hso_dev); |
| 2137 |
|
| 2138 |
if (!serial) |
| 2139 |
return -ENODEV; |
| 2140 |
|
| 2141 |
/* If it is not the MUX port fill in and submit a bulk urb (already |
| 2142 |
* allocated in hso_serial_start) */ |
| 2143 |
if (!(serial->parent->port_spec & HSO_INTF_MUX)) { |
| 2144 |
for (i = 0; i < serial->num_rx_urbs; i++) { |
| 2145 |
usb_fill_bulk_urb(serial->rx_urb[i], |
| 2146 |
serial->parent->usb, |
| 2147 |
usb_rcvbulkpipe(serial->parent->usb, |
| 2148 |
serial->in_endp-> |
| 2149 |
bEndpointAddress & |
| 2150 |
0x7F), |
| 2151 |
serial->rx_data[i], |
| 2152 |
serial->rx_data_length, |
| 2153 |
hso_std_serial_read_bulk_callback, |
| 2154 |
serial); |
| 2155 |
result = usb_submit_urb(serial->rx_urb[i], flags); |
| 2156 |
if (result) { |
| 2157 |
dev_warn(&serial->parent->usb->dev, |
| 2158 |
"Failed to submit urb - res %d\n", |
| 2159 |
result); |
| 2160 |
break; |
| 2161 |
} |
| 2162 |
} |
| 2163 |
} else { |
| 2164 |
mutex_lock(&serial->shared_int->shared_int_lock); |
| 2165 |
if (!serial->shared_int->use_count) { |
| 2166 |
result = |
| 2167 |
hso_mux_submit_intr_urb(serial->shared_int, |
| 2168 |
hso_dev->usb, flags); |
| 2169 |
} |
| 2170 |
serial->shared_int->use_count++; |
| 2171 |
mutex_unlock(&serial->shared_int->shared_int_lock); |
| 2172 |
} |
| 2173 |
if (serial->tiocmget) |
| 2174 |
tiocmget_submit_urb(serial, |
| 2175 |
serial->tiocmget, |
| 2176 |
serial->parent->usb); |
| 2177 |
return result; |
| 2178 |
} |
| 2179 |
|
| 2180 |
static int hso_stop_serial_device(struct hso_device *hso_dev) |
| 2181 |
{ |
| 2182 |
int i; |
| 2183 |
struct hso_serial *serial = dev2ser(hso_dev); |
| 2184 |
struct hso_tiocmget *tiocmget; |
| 2185 |
|
| 2186 |
if (!serial) |
| 2187 |
return -ENODEV; |
| 2188 |
|
| 2189 |
for (i = 0; i < serial->num_rx_urbs; i++) { |
| 2190 |
if (serial->rx_urb[i]) { |
| 2191 |
usb_kill_urb(serial->rx_urb[i]); |
| 2192 |
serial->rx_urb_filled[i] = 0; |
| 2193 |
} |
| 2194 |
} |
| 2195 |
serial->curr_rx_urb_idx = 0; |
| 2196 |
|
| 2197 |
if (serial->tx_urb) |
| 2198 |
usb_kill_urb(serial->tx_urb); |
| 2199 |
|
| 2200 |
if (serial->shared_int) { |
| 2201 |
mutex_lock(&serial->shared_int->shared_int_lock); |
| 2202 |
if (serial->shared_int->use_count && |
| 2203 |
(--serial->shared_int->use_count == 0)) { |
| 2204 |
struct urb *urb; |
| 2205 |
|
| 2206 |
urb = serial->shared_int->shared_intr_urb; |
| 2207 |
if (urb) |
| 2208 |
usb_kill_urb(urb); |
| 2209 |
} |
| 2210 |
mutex_unlock(&serial->shared_int->shared_int_lock); |
| 2211 |
} |
| 2212 |
tiocmget = serial->tiocmget; |
| 2213 |
if (tiocmget) { |
| 2214 |
wake_up_interruptible(&tiocmget->waitq); |
| 2215 |
usb_kill_urb(tiocmget->urb); |
| 2216 |
} |
| 2217 |
|
| 2218 |
return 0; |
| 2219 |
} |
| 2220 |
|
| 2221 |
static void hso_serial_tty_unregister(struct hso_serial *serial) |
| 2222 |
{ |
| 2223 |
tty_unregister_device(tty_drv, serial->minor); |
| 2224 |
release_minor(serial); |
| 2225 |
} |
| 2226 |
|
| 2227 |
static void hso_serial_common_free(struct hso_serial *serial) |
| 2228 |
{ |
| 2229 |
int i; |
| 2230 |
|
| 2231 |
for (i = 0; i < serial->num_rx_urbs; i++) { |
| 2232 |
/* unlink and free RX URB */ |
| 2233 |
usb_free_urb(serial->rx_urb[i]); |
| 2234 |
/* free the RX buffer */ |
| 2235 |
kfree(serial->rx_data[i]); |
| 2236 |
} |
| 2237 |
|
| 2238 |
/* unlink and free TX URB */ |
| 2239 |
usb_free_urb(serial->tx_urb); |
| 2240 |
kfree(serial->tx_buffer); |
| 2241 |
kfree(serial->tx_data); |
| 2242 |
tty_port_destroy(&serial->port); |
| 2243 |
} |
| 2244 |
|
| 2245 |
static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, |
| 2246 |
int rx_size, int tx_size) |
| 2247 |
{ |
| 2248 |
int i; |
| 2249 |
|
| 2250 |
tty_port_init(&serial->port); |
| 2251 |
|
| 2252 |
if (obtain_minor(serial)) |
| 2253 |
goto exit2; |
| 2254 |
|
| 2255 |
/* register our minor number */ |
| 2256 |
serial->parent->dev = tty_port_register_device_attr(&serial->port, |
| 2257 |
tty_drv, serial->minor, &serial->parent->interface->dev, |
| 2258 |
serial->parent, hso_serial_dev_groups); |
| 2259 |
if (IS_ERR(serial->parent->dev)) { |
| 2260 |
release_minor(serial); |
| 2261 |
goto exit2; |
| 2262 |
} |
| 2263 |
|
| 2264 |
serial->magic = HSO_SERIAL_MAGIC; |
| 2265 |
spin_lock_init(&serial->serial_lock); |
| 2266 |
serial->num_rx_urbs = num_urbs; |
| 2267 |
|
| 2268 |
/* RX, allocate urb and initialize */ |
| 2269 |
|
| 2270 |
/* prepare our RX buffer */ |
| 2271 |
serial->rx_data_length = rx_size; |
| 2272 |
for (i = 0; i < serial->num_rx_urbs; i++) { |
| 2273 |
serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL); |
| 2274 |
if (!serial->rx_urb[i]) |
| 2275 |
goto exit; |
| 2276 |
serial->rx_urb[i]->transfer_buffer = NULL; |
| 2277 |
serial->rx_urb[i]->transfer_buffer_length = 0; |
| 2278 |
serial->rx_data[i] = kzalloc(serial->rx_data_length, |
| 2279 |
GFP_KERNEL); |
| 2280 |
if (!serial->rx_data[i]) |
| 2281 |
goto exit; |
| 2282 |
} |
| 2283 |
|
| 2284 |
/* TX, allocate urb and initialize */ |
| 2285 |
serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL); |
| 2286 |
if (!serial->tx_urb) |
| 2287 |
goto exit; |
| 2288 |
serial->tx_urb->transfer_buffer = NULL; |
| 2289 |
serial->tx_urb->transfer_buffer_length = 0; |
| 2290 |
/* prepare our TX buffer */ |
| 2291 |
serial->tx_data_count = 0; |
| 2292 |
serial->tx_buffer_count = 0; |
| 2293 |
serial->tx_data_length = tx_size; |
| 2294 |
serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL); |
| 2295 |
if (!serial->tx_data) |
| 2296 |
goto exit; |
| 2297 |
|
| 2298 |
serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL); |
| 2299 |
if (!serial->tx_buffer) |
| 2300 |
goto exit; |
| 2301 |
|
| 2302 |
return 0; |
| 2303 |
exit: |
| 2304 |
hso_serial_tty_unregister(serial); |
| 2305 |
exit2: |
| 2306 |
hso_serial_common_free(serial); |
| 2307 |
return -1; |
| 2308 |
} |
| 2309 |
|
| 2310 |
/* Creates a general hso device */ |
| 2311 |
static struct hso_device *hso_create_device(struct usb_interface *intf, |
| 2312 |
int port_spec) |
| 2313 |
{ |
| 2314 |
struct hso_device *hso_dev; |
| 2315 |
|
| 2316 |
hso_dev = kzalloc_obj(*hso_dev); |
| 2317 |
if (!hso_dev) |
| 2318 |
return NULL; |
| 2319 |
|
| 2320 |
hso_dev->port_spec = port_spec; |
| 2321 |
hso_dev->usb = interface_to_usbdev(intf); |
| 2322 |
hso_dev->interface = intf; |
| 2323 |
kref_init(&hso_dev->ref); |
| 2324 |
mutex_init(&hso_dev->mutex); |
| 2325 |
|
| 2326 |
INIT_WORK(&hso_dev->async_get_intf, async_get_intf); |
| 2327 |
INIT_WORK(&hso_dev->async_put_intf, async_put_intf); |
| 2328 |
|
| 2329 |
return hso_dev; |
| 2330 |
} |
| 2331 |
|
| 2332 |
/* Removes a network device in the network device table */ |
| 2333 |
static int remove_net_device(struct hso_device *hso_dev) |
| 2334 |
{ |
| 2335 |
int i; |
| 2336 |
|
| 2337 |
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { |
| 2338 |
if (network_table[i] == hso_dev) { |
| 2339 |
network_table[i] = NULL; |
| 2340 |
break; |
| 2341 |
} |
| 2342 |
} |
| 2343 |
if (i == HSO_MAX_NET_DEVICES) |
| 2344 |
return -1; |
| 2345 |
return 0; |
| 2346 |
} |
| 2347 |
|
| 2348 |
/* Frees our network device */ |
| 2349 |
static void hso_free_net_device(struct hso_device *hso_dev) |
| 2350 |
{ |
| 2351 |
int i; |
| 2352 |
struct hso_net *hso_net = dev2net(hso_dev); |
| 2353 |
|
| 2354 |
if (!hso_net) |
| 2355 |
return; |
| 2356 |
|
| 2357 |
remove_net_device(hso_net->parent); |
| 2358 |
|
| 2359 |
if (hso_net->net) |
| 2360 |
unregister_netdev(hso_net->net); |
| 2361 |
|
| 2362 |
/* start freeing */ |
| 2363 |
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { |
| 2364 |
usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]); |
| 2365 |
kfree(hso_net->mux_bulk_rx_buf_pool[i]); |
| 2366 |
hso_net->mux_bulk_rx_buf_pool[i] = NULL; |
| 2367 |
} |
| 2368 |
usb_free_urb(hso_net->mux_bulk_tx_urb); |
| 2369 |
kfree(hso_net->mux_bulk_tx_buf); |
| 2370 |
hso_net->mux_bulk_tx_buf = NULL; |
| 2371 |
|
| 2372 |
if (hso_net->net) |
| 2373 |
free_netdev(hso_net->net); |
| 2374 |
|
| 2375 |
kfree(hso_dev); |
| 2376 |
} |
| 2377 |
|
| 2378 |
static const struct net_device_ops hso_netdev_ops = { |
| 2379 |
.ndo_open = hso_net_open, |
| 2380 |
.ndo_stop = hso_net_close, |
| 2381 |
.ndo_start_xmit = hso_net_start_xmit, |
| 2382 |
.ndo_tx_timeout = hso_net_tx_timeout, |
| 2383 |
}; |
| 2384 |
|
| 2385 |
/* initialize the network interface */ |
| 2386 |
static void hso_net_init(struct net_device *net) |
| 2387 |
{ |
| 2388 |
struct hso_net *hso_net = netdev_priv(net); |
| 2389 |
|
| 2390 |
hso_dbg(0x1, "sizeof hso_net is %zu\n", sizeof(*hso_net)); |
| 2391 |
|
| 2392 |
/* fill in the other fields */ |
| 2393 |
net->netdev_ops = &hso_netdev_ops; |
| 2394 |
net->watchdog_timeo = HSO_NET_TX_TIMEOUT; |
| 2395 |
net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; |
| 2396 |
net->type = ARPHRD_NONE; |
| 2397 |
net->mtu = DEFAULT_MTU - 14; |
| 2398 |
net->tx_queue_len = 10; |
| 2399 |
net->ethtool_ops = &ops; |
| 2400 |
|
| 2401 |
/* and initialize the semaphore */ |
| 2402 |
spin_lock_init(&hso_net->net_lock); |
| 2403 |
} |
| 2404 |
|
| 2405 |
/* Adds a network device in the network device table */ |
| 2406 |
static int add_net_device(struct hso_device *hso_dev) |
| 2407 |
{ |
| 2408 |
int i; |
| 2409 |
|
| 2410 |
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { |
| 2411 |
if (network_table[i] == NULL) { |
| 2412 |
network_table[i] = hso_dev; |
| 2413 |
break; |
| 2414 |
} |
| 2415 |
} |
| 2416 |
if (i == HSO_MAX_NET_DEVICES) |
| 2417 |
return -1; |
| 2418 |
return 0; |
| 2419 |
} |
| 2420 |
|
| 2421 |
static int hso_rfkill_set_block(void *data, bool blocked) |
| 2422 |
{ |
| 2423 |
struct hso_device *hso_dev = data; |
| 2424 |
int enabled = !blocked; |
| 2425 |
int rv; |
| 2426 |
|
| 2427 |
mutex_lock(&hso_dev->mutex); |
| 2428 |
if (hso_dev->usb_gone) |
| 2429 |
rv = 0; |
| 2430 |
else |
| 2431 |
rv = usb_control_msg(hso_dev->usb, usb_sndctrlpipe(hso_dev->usb, 0), |
| 2432 |
enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0, |
| 2433 |
USB_CTRL_SET_TIMEOUT); |
| 2434 |
mutex_unlock(&hso_dev->mutex); |
| 2435 |
return rv; |
| 2436 |
} |
| 2437 |
|
| 2438 |
static const struct rfkill_ops hso_rfkill_ops = { |
| 2439 |
.set_block = hso_rfkill_set_block, |
| 2440 |
}; |
| 2441 |
|
| 2442 |
/* Creates and sets up everything for rfkill */ |
| 2443 |
static void hso_create_rfkill(struct hso_device *hso_dev, |
| 2444 |
struct usb_interface *interface) |
| 2445 |
{ |
| 2446 |
struct hso_net *hso_net = dev2net(hso_dev); |
| 2447 |
struct device *dev = &hso_net->net->dev; |
| 2448 |
static u32 rfkill_counter; |
| 2449 |
|
| 2450 |
snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d", |
| 2451 |
rfkill_counter++); |
| 2452 |
|
| 2453 |
hso_net->rfkill = rfkill_alloc(hso_net->name, |
| 2454 |
&interface_to_usbdev(interface)->dev, |
| 2455 |
RFKILL_TYPE_WWAN, |
| 2456 |
&hso_rfkill_ops, hso_dev); |
| 2457 |
if (!hso_net->rfkill) |
| 2458 |
return; |
| 2459 |
|
| 2460 |
if (rfkill_register(hso_net->rfkill) < 0) { |
| 2461 |
rfkill_destroy(hso_net->rfkill); |
| 2462 |
hso_net->rfkill = NULL; |
| 2463 |
dev_err(dev, "%s - Failed to register rfkill\n", __func__); |
| 2464 |
return; |
| 2465 |
} |
| 2466 |
} |
| 2467 |
|
| 2468 |
static const struct device_type hso_type = { |
| 2469 |
.name = "wwan", |
| 2470 |
}; |
| 2471 |
|
| 2472 |
/* Creates our network device */ |
| 2473 |
static struct hso_device *hso_create_net_device(struct usb_interface *interface, |
| 2474 |
int port_spec) |
| 2475 |
{ |
| 2476 |
int result, i; |
| 2477 |
struct net_device *net; |
| 2478 |
struct hso_net *hso_net; |
| 2479 |
struct hso_device *hso_dev; |
| 2480 |
|
| 2481 |
hso_dev = hso_create_device(interface, port_spec); |
| 2482 |
if (!hso_dev) |
| 2483 |
return NULL; |
| 2484 |
|
| 2485 |
/* allocate our network device, then we can put in our private data */ |
| 2486 |
/* call hso_net_init to do the basic initialization */ |
| 2487 |
net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN, |
| 2488 |
hso_net_init); |
| 2489 |
if (!net) { |
| 2490 |
dev_err(&interface->dev, "Unable to create ethernet device\n"); |
| 2491 |
goto err_hso_dev; |
| 2492 |
} |
| 2493 |
|
| 2494 |
hso_net = netdev_priv(net); |
| 2495 |
|
| 2496 |
hso_dev->port_data.dev_net = hso_net; |
| 2497 |
hso_net->net = net; |
| 2498 |
hso_net->parent = hso_dev; |
| 2499 |
|
| 2500 |
hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, |
| 2501 |
USB_DIR_IN); |
| 2502 |
if (!hso_net->in_endp) { |
| 2503 |
dev_err(&interface->dev, "Can't find BULK IN endpoint\n"); |
| 2504 |
goto err_net; |
| 2505 |
} |
| 2506 |
hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, |
| 2507 |
USB_DIR_OUT); |
| 2508 |
if (!hso_net->out_endp) { |
| 2509 |
dev_err(&interface->dev, "Can't find BULK OUT endpoint\n"); |
| 2510 |
goto err_net; |
| 2511 |
} |
| 2512 |
SET_NETDEV_DEV(net, &interface->dev); |
| 2513 |
SET_NETDEV_DEVTYPE(net, &hso_type); |
| 2514 |
|
| 2515 |
/* start allocating */ |
| 2516 |
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { |
| 2517 |
hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL); |
| 2518 |
if (!hso_net->mux_bulk_rx_urb_pool[i]) |
| 2519 |
goto err_mux_bulk_rx; |
| 2520 |
hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE, |
| 2521 |
GFP_KERNEL); |
| 2522 |
if (!hso_net->mux_bulk_rx_buf_pool[i]) |
| 2523 |
goto err_mux_bulk_rx; |
| 2524 |
} |
| 2525 |
hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL); |
| 2526 |
if (!hso_net->mux_bulk_tx_urb) |
| 2527 |
goto err_mux_bulk_rx; |
| 2528 |
hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL); |
| 2529 |
if (!hso_net->mux_bulk_tx_buf) |
| 2530 |
goto err_free_tx_urb; |
| 2531 |
|
| 2532 |
result = add_net_device(hso_dev); |
| 2533 |
if (result) { |
| 2534 |
dev_err(&interface->dev, "Failed to add net device\n"); |
| 2535 |
goto err_free_tx_buf; |
| 2536 |
} |
| 2537 |
|
| 2538 |
/* registering our net device */ |
| 2539 |
result = register_netdev(net); |
| 2540 |
if (result) { |
| 2541 |
dev_err(&interface->dev, "Failed to register device\n"); |
| 2542 |
goto err_rmv_ndev; |
| 2543 |
} |
| 2544 |
|
| 2545 |
hso_log_port(hso_dev); |
| 2546 |
|
| 2547 |
hso_create_rfkill(hso_dev, interface); |
| 2548 |
|
| 2549 |
return hso_dev; |
| 2550 |
|
| 2551 |
err_rmv_ndev: |
| 2552 |
remove_net_device(hso_dev); |
| 2553 |
err_free_tx_buf: |
| 2554 |
kfree(hso_net->mux_bulk_tx_buf); |
| 2555 |
err_free_tx_urb: |
| 2556 |
usb_free_urb(hso_net->mux_bulk_tx_urb); |
| 2557 |
err_mux_bulk_rx: |
| 2558 |
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { |
| 2559 |
usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]); |
| 2560 |
kfree(hso_net->mux_bulk_rx_buf_pool[i]); |
| 2561 |
} |
| 2562 |
err_net: |
| 2563 |
free_netdev(net); |
| 2564 |
err_hso_dev: |
| 2565 |
kfree(hso_dev); |
| 2566 |
return NULL; |
| 2567 |
} |
| 2568 |
|
| 2569 |
static void hso_free_tiomget(struct hso_serial *serial) |
| 2570 |
{ |
| 2571 |
struct hso_tiocmget *tiocmget; |
| 2572 |
if (!serial) |
| 2573 |
return; |
| 2574 |
tiocmget = serial->tiocmget; |
| 2575 |
if (tiocmget) { |
| 2576 |
usb_free_urb(tiocmget->urb); |
| 2577 |
tiocmget->urb = NULL; |
| 2578 |
serial->tiocmget = NULL; |
| 2579 |
kfree(tiocmget->serial_state_notification); |
| 2580 |
tiocmget->serial_state_notification = NULL; |
| 2581 |
kfree(tiocmget); |
| 2582 |
} |
| 2583 |
} |
| 2584 |
|
| 2585 |
/* Frees an AT channel ( goes for both mux and non-mux ) */ |
| 2586 |
static void hso_free_serial_device(struct hso_device *hso_dev) |
| 2587 |
{ |
| 2588 |
struct hso_serial *serial = dev2ser(hso_dev); |
| 2589 |
|
| 2590 |
if (!serial) |
| 2591 |
return; |
| 2592 |
|
| 2593 |
hso_serial_common_free(serial); |
| 2594 |
|
| 2595 |
if (serial->shared_int) { |
| 2596 |
mutex_lock(&serial->shared_int->shared_int_lock); |
| 2597 |
if (--serial->shared_int->ref_count == 0) |
| 2598 |
hso_free_shared_int(serial->shared_int); |
| 2599 |
else |
| 2600 |
mutex_unlock(&serial->shared_int->shared_int_lock); |
| 2601 |
} |
| 2602 |
hso_free_tiomget(serial); |
| 2603 |
kfree(serial); |
| 2604 |
kfree(hso_dev); |
| 2605 |
} |
| 2606 |
|
| 2607 |
/* Creates a bulk AT channel */ |
| 2608 |
static struct hso_device *hso_create_bulk_serial_device( |
| 2609 |
struct usb_interface *interface, int port) |
| 2610 |
{ |
| 2611 |
struct hso_device *hso_dev; |
| 2612 |
struct hso_serial *serial; |
| 2613 |
int num_urbs; |
| 2614 |
struct hso_tiocmget *tiocmget; |
| 2615 |
|
| 2616 |
hso_dev = hso_create_device(interface, port); |
| 2617 |
if (!hso_dev) |
| 2618 |
return NULL; |
| 2619 |
|
| 2620 |
serial = kzalloc_obj(*serial); |
| 2621 |
if (!serial) |
| 2622 |
goto exit; |
| 2623 |
|
| 2624 |
serial->parent = hso_dev; |
| 2625 |
hso_dev->port_data.dev_serial = serial; |
| 2626 |
|
| 2627 |
if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) { |
| 2628 |
num_urbs = 2; |
| 2629 |
serial->tiocmget = kzalloc_obj(struct hso_tiocmget); |
| 2630 |
if (!serial->tiocmget) |
| 2631 |
goto exit; |
| 2632 |
serial->tiocmget->serial_state_notification |
| 2633 |
= kzalloc_obj(struct hso_serial_state_notification); |
| 2634 |
if (!serial->tiocmget->serial_state_notification) |
| 2635 |
goto exit; |
| 2636 |
tiocmget = serial->tiocmget; |
| 2637 |
tiocmget->endp = hso_get_ep(interface, |
| 2638 |
USB_ENDPOINT_XFER_INT, |
| 2639 |
USB_DIR_IN); |
| 2640 |
if (!tiocmget->endp) { |
| 2641 |
dev_err(&interface->dev, "Failed to find INT IN ep\n"); |
| 2642 |
goto exit; |
| 2643 |
} |
| 2644 |
|
| 2645 |
tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 2646 |
if (!tiocmget->urb) |
| 2647 |
goto exit; |
| 2648 |
|
| 2649 |
mutex_init(&tiocmget->mutex); |
| 2650 |
init_waitqueue_head(&tiocmget->waitq); |
| 2651 |
} else { |
| 2652 |
num_urbs = 1; |
| 2653 |
} |
| 2654 |
|
| 2655 |
if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE, |
| 2656 |
BULK_URB_TX_SIZE)) |
| 2657 |
goto exit; |
| 2658 |
|
| 2659 |
serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, |
| 2660 |
USB_DIR_IN); |
| 2661 |
if (!serial->in_endp) { |
| 2662 |
dev_err(&interface->dev, "Failed to find BULK IN ep\n"); |
| 2663 |
goto exit2; |
| 2664 |
} |
| 2665 |
|
| 2666 |
if (! |
| 2667 |
(serial->out_endp = |
| 2668 |
hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) { |
| 2669 |
dev_err(&interface->dev, "Failed to find BULK OUT ep\n"); |
| 2670 |
goto exit2; |
| 2671 |
} |
| 2672 |
|
| 2673 |
serial->write_data = hso_std_serial_write_data; |
| 2674 |
|
| 2675 |
/* setup the proc dirs and files if needed */ |
| 2676 |
hso_log_port(hso_dev); |
| 2677 |
|
| 2678 |
/* done, return it */ |
| 2679 |
return hso_dev; |
| 2680 |
|
| 2681 |
exit2: |
| 2682 |
hso_serial_tty_unregister(serial); |
| 2683 |
hso_serial_common_free(serial); |
| 2684 |
exit: |
| 2685 |
hso_free_tiomget(serial); |
| 2686 |
kfree(serial); |
| 2687 |
kfree(hso_dev); |
| 2688 |
return NULL; |
| 2689 |
} |
| 2690 |
|
| 2691 |
/* Creates a multiplexed AT channel */ |
| 2692 |
static |
| 2693 |
struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, |
| 2694 |
int port, |
| 2695 |
struct hso_shared_int *mux) |
| 2696 |
{ |
| 2697 |
struct hso_device *hso_dev; |
| 2698 |
struct hso_serial *serial; |
| 2699 |
int port_spec; |
| 2700 |
|
| 2701 |
port_spec = HSO_INTF_MUX; |
| 2702 |
port_spec &= ~HSO_PORT_MASK; |
| 2703 |
|
| 2704 |
port_spec |= hso_mux_to_port(port); |
| 2705 |
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT) |
| 2706 |
return NULL; |
| 2707 |
|
| 2708 |
hso_dev = hso_create_device(interface, port_spec); |
| 2709 |
if (!hso_dev) |
| 2710 |
return NULL; |
| 2711 |
|
| 2712 |
serial = kzalloc_obj(*serial); |
| 2713 |
if (!serial) |
| 2714 |
goto err_free_dev; |
| 2715 |
|
| 2716 |
hso_dev->port_data.dev_serial = serial; |
| 2717 |
serial->parent = hso_dev; |
| 2718 |
|
| 2719 |
if (hso_serial_common_create |
| 2720 |
(serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE)) |
| 2721 |
goto err_free_serial; |
| 2722 |
|
| 2723 |
serial->tx_data_length--; |
| 2724 |
serial->write_data = hso_mux_serial_write_data; |
| 2725 |
|
| 2726 |
serial->shared_int = mux; |
| 2727 |
mutex_lock(&serial->shared_int->shared_int_lock); |
| 2728 |
serial->shared_int->ref_count++; |
| 2729 |
mutex_unlock(&serial->shared_int->shared_int_lock); |
| 2730 |
|
| 2731 |
/* setup the proc dirs and files if needed */ |
| 2732 |
hso_log_port(hso_dev); |
| 2733 |
|
| 2734 |
/* done, return it */ |
| 2735 |
return hso_dev; |
| 2736 |
|
| 2737 |
err_free_serial: |
| 2738 |
kfree(serial); |
| 2739 |
err_free_dev: |
| 2740 |
kfree(hso_dev); |
| 2741 |
return NULL; |
| 2742 |
|
| 2743 |
} |
| 2744 |
|
| 2745 |
static void hso_free_shared_int(struct hso_shared_int *mux) |
| 2746 |
{ |
| 2747 |
usb_free_urb(mux->shared_intr_urb); |
| 2748 |
kfree(mux->shared_intr_buf); |
| 2749 |
mutex_unlock(&mux->shared_int_lock); |
| 2750 |
kfree(mux); |
| 2751 |
} |
| 2752 |
|
| 2753 |
static |
| 2754 |
struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface) |
| 2755 |
{ |
| 2756 |
struct hso_shared_int *mux = kzalloc_obj(*mux); |
| 2757 |
|
| 2758 |
if (!mux) |
| 2759 |
return NULL; |
| 2760 |
|
| 2761 |
mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT, |
| 2762 |
USB_DIR_IN); |
| 2763 |
if (!mux->intr_endp) { |
| 2764 |
dev_err(&interface->dev, "Can't find INT IN endpoint\n"); |
| 2765 |
goto exit; |
| 2766 |
} |
| 2767 |
|
| 2768 |
mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL); |
| 2769 |
if (!mux->shared_intr_urb) |
| 2770 |
goto exit; |
| 2771 |
mux->shared_intr_buf = |
| 2772 |
kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize), |
| 2773 |
GFP_KERNEL); |
| 2774 |
if (!mux->shared_intr_buf) |
| 2775 |
goto exit; |
| 2776 |
|
| 2777 |
mutex_init(&mux->shared_int_lock); |
| 2778 |
|
| 2779 |
return mux; |
| 2780 |
|
| 2781 |
exit: |
| 2782 |
kfree(mux->shared_intr_buf); |
| 2783 |
usb_free_urb(mux->shared_intr_urb); |
| 2784 |
kfree(mux); |
| 2785 |
return NULL; |
| 2786 |
} |
| 2787 |
|
| 2788 |
/* Gets the port spec for a certain interface */ |
| 2789 |
static int hso_get_config_data(struct usb_interface *interface) |
| 2790 |
{ |
| 2791 |
struct usb_device *usbdev = interface_to_usbdev(interface); |
| 2792 |
u8 *config_data = kmalloc(17, GFP_KERNEL); |
| 2793 |
u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber; |
| 2794 |
s32 result; |
| 2795 |
|
| 2796 |
if (!config_data) |
| 2797 |
return -ENOMEM; |
| 2798 |
if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), |
| 2799 |
0x86, 0xC0, 0, 0, config_data, 17, |
| 2800 |
USB_CTRL_SET_TIMEOUT) != 0x11) { |
| 2801 |
kfree(config_data); |
| 2802 |
return -EIO; |
| 2803 |
} |
| 2804 |
|
| 2805 |
/* check if we have a valid interface */ |
| 2806 |
if (if_num > 16) { |
| 2807 |
kfree(config_data); |
| 2808 |
return -EINVAL; |
| 2809 |
} |
| 2810 |
|
| 2811 |
switch (config_data[if_num]) { |
| 2812 |
case 0x0: |
| 2813 |
result = 0; |
| 2814 |
break; |
| 2815 |
case 0x1: |
| 2816 |
result = HSO_PORT_DIAG; |
| 2817 |
break; |
| 2818 |
case 0x2: |
| 2819 |
result = HSO_PORT_GPS; |
| 2820 |
break; |
| 2821 |
case 0x3: |
| 2822 |
result = HSO_PORT_GPS_CONTROL; |
| 2823 |
break; |
| 2824 |
case 0x4: |
| 2825 |
result = HSO_PORT_APP; |
| 2826 |
break; |
| 2827 |
case 0x5: |
| 2828 |
result = HSO_PORT_APP2; |
| 2829 |
break; |
| 2830 |
case 0x6: |
| 2831 |
result = HSO_PORT_CONTROL; |
| 2832 |
break; |
| 2833 |
case 0x7: |
| 2834 |
result = HSO_PORT_NETWORK; |
| 2835 |
break; |
| 2836 |
case 0x8: |
| 2837 |
result = HSO_PORT_MODEM; |
| 2838 |
break; |
| 2839 |
case 0x9: |
| 2840 |
result = HSO_PORT_MSD; |
| 2841 |
break; |
| 2842 |
case 0xa: |
| 2843 |
result = HSO_PORT_PCSC; |
| 2844 |
break; |
| 2845 |
case 0xb: |
| 2846 |
result = HSO_PORT_VOICE; |
| 2847 |
break; |
| 2848 |
default: |
| 2849 |
result = 0; |
| 2850 |
} |
| 2851 |
|
| 2852 |
if (result) |
| 2853 |
result |= HSO_INTF_BULK; |
| 2854 |
|
| 2855 |
if (config_data[16] & 0x1) |
| 2856 |
result |= HSO_INFO_CRC_BUG; |
| 2857 |
|
| 2858 |
kfree(config_data); |
| 2859 |
return result; |
| 2860 |
} |
| 2861 |
|
| 2862 |
/* called once for each interface upon device insertion */ |
| 2863 |
static int hso_probe(struct usb_interface *interface, |
| 2864 |
const struct usb_device_id *id) |
| 2865 |
{ |
| 2866 |
int mux, i, if_num, port_spec; |
| 2867 |
unsigned char port_mask; |
| 2868 |
struct hso_device *hso_dev = NULL; |
| 2869 |
struct hso_shared_int *shared_int; |
| 2870 |
struct hso_device *tmp_dev = NULL; |
| 2871 |
|
| 2872 |
if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) { |
| 2873 |
dev_err(&interface->dev, "Not our interface\n"); |
| 2874 |
return -ENODEV; |
| 2875 |
} |
| 2876 |
|
| 2877 |
if_num = interface->cur_altsetting->desc.bInterfaceNumber; |
| 2878 |
|
| 2879 |
/* Get the interface/port specification from either driver_info or from |
| 2880 |
* the device itself */ |
| 2881 |
if (id->driver_info) { |
| 2882 |
/* if_num is controlled by the device, driver_info is a 0 terminated |
| 2883 |
* array. Make sure, the access is in bounds! */ |
| 2884 |
for (i = 0; i <= if_num; ++i) |
| 2885 |
if (((u32 *)(id->driver_info))[i] == 0) |
| 2886 |
goto exit; |
| 2887 |
port_spec = ((u32 *)(id->driver_info))[if_num]; |
| 2888 |
} else { |
| 2889 |
port_spec = hso_get_config_data(interface); |
| 2890 |
if (port_spec < 0) |
| 2891 |
goto exit; |
| 2892 |
} |
| 2893 |
|
| 2894 |
/* Check if we need to switch to alt interfaces prior to port |
| 2895 |
* configuration */ |
| 2896 |
if (interface->num_altsetting > 1) |
| 2897 |
usb_set_interface(interface_to_usbdev(interface), if_num, 1); |
| 2898 |
interface->needs_remote_wakeup = 1; |
| 2899 |
|
| 2900 |
/* Allocate new hso device(s) */ |
| 2901 |
switch (port_spec & HSO_INTF_MASK) { |
| 2902 |
case HSO_INTF_MUX: |
| 2903 |
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { |
| 2904 |
/* Create the network device */ |
| 2905 |
if (!disable_net) { |
| 2906 |
hso_dev = hso_create_net_device(interface, |
| 2907 |
port_spec); |
| 2908 |
if (!hso_dev) |
| 2909 |
goto exit; |
| 2910 |
tmp_dev = hso_dev; |
| 2911 |
} |
| 2912 |
} |
| 2913 |
|
| 2914 |
if (hso_get_mux_ports(interface, &port_mask)) |
| 2915 |
/* TODO: de-allocate everything */ |
| 2916 |
goto exit; |
| 2917 |
|
| 2918 |
shared_int = hso_create_shared_int(interface); |
| 2919 |
if (!shared_int) |
| 2920 |
goto exit; |
| 2921 |
|
| 2922 |
for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) { |
| 2923 |
if (port_mask & i) { |
| 2924 |
hso_dev = hso_create_mux_serial_device( |
| 2925 |
interface, i, shared_int); |
| 2926 |
if (!hso_dev) |
| 2927 |
goto exit; |
| 2928 |
} |
| 2929 |
} |
| 2930 |
|
| 2931 |
if (tmp_dev) |
| 2932 |
hso_dev = tmp_dev; |
| 2933 |
break; |
| 2934 |
|
| 2935 |
case HSO_INTF_BULK: |
| 2936 |
/* It's a regular bulk interface */ |
| 2937 |
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) { |
| 2938 |
if (!disable_net) |
| 2939 |
hso_dev = |
| 2940 |
hso_create_net_device(interface, port_spec); |
| 2941 |
} else { |
| 2942 |
hso_dev = |
| 2943 |
hso_create_bulk_serial_device(interface, port_spec); |
| 2944 |
} |
| 2945 |
if (!hso_dev) |
| 2946 |
goto exit; |
| 2947 |
break; |
| 2948 |
default: |
| 2949 |
goto exit; |
| 2950 |
} |
| 2951 |
|
| 2952 |
/* save our data pointer in this device */ |
| 2953 |
usb_set_intfdata(interface, hso_dev); |
| 2954 |
|
| 2955 |
/* done */ |
| 2956 |
return 0; |
| 2957 |
exit: |
| 2958 |
hso_free_interface(interface); |
| 2959 |
return -ENODEV; |
| 2960 |
} |
| 2961 |
|
| 2962 |
/* device removed, cleaning up */ |
| 2963 |
static void hso_disconnect(struct usb_interface *interface) |
| 2964 |
{ |
| 2965 |
hso_free_interface(interface); |
| 2966 |
|
| 2967 |
/* remove reference of our private data */ |
| 2968 |
usb_set_intfdata(interface, NULL); |
| 2969 |
} |
| 2970 |
|
| 2971 |
static void async_get_intf(struct work_struct *data) |
| 2972 |
{ |
| 2973 |
struct hso_device *hso_dev = |
| 2974 |
container_of(data, struct hso_device, async_get_intf); |
| 2975 |
usb_autopm_get_interface(hso_dev->interface); |
| 2976 |
} |
| 2977 |
|
| 2978 |
static void async_put_intf(struct work_struct *data) |
| 2979 |
{ |
| 2980 |
struct hso_device *hso_dev = |
| 2981 |
container_of(data, struct hso_device, async_put_intf); |
| 2982 |
usb_autopm_put_interface(hso_dev->interface); |
| 2983 |
} |
| 2984 |
|
| 2985 |
static int hso_get_activity(struct hso_device *hso_dev) |
| 2986 |
{ |
| 2987 |
if (hso_dev->usb->state == USB_STATE_SUSPENDED) { |
| 2988 |
if (!hso_dev->is_active) { |
| 2989 |
hso_dev->is_active = 1; |
| 2990 |
schedule_work(&hso_dev->async_get_intf); |
| 2991 |
} |
| 2992 |
} |
| 2993 |
|
| 2994 |
if (hso_dev->usb->state != USB_STATE_CONFIGURED) |
| 2995 |
return -EAGAIN; |
| 2996 |
|
| 2997 |
usb_mark_last_busy(hso_dev->usb); |
| 2998 |
|
| 2999 |
return 0; |
| 3000 |
} |
| 3001 |
|
| 3002 |
static int hso_put_activity(struct hso_device *hso_dev) |
| 3003 |
{ |
| 3004 |
if (hso_dev->usb->state != USB_STATE_SUSPENDED) { |
| 3005 |
if (hso_dev->is_active) { |
| 3006 |
hso_dev->is_active = 0; |
| 3007 |
schedule_work(&hso_dev->async_put_intf); |
| 3008 |
return -EAGAIN; |
| 3009 |
} |
| 3010 |
} |
| 3011 |
hso_dev->is_active = 0; |
| 3012 |
return 0; |
| 3013 |
} |
| 3014 |
|
| 3015 |
/* called by kernel when we need to suspend device */ |
| 3016 |
static int hso_suspend(struct usb_interface *iface, pm_message_t message) |
| 3017 |
{ |
| 3018 |
int i, result; |
| 3019 |
|
| 3020 |
/* Stop all serial ports */ |
| 3021 |
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { |
| 3022 |
if (serial_table[i] && (serial_table[i]->interface == iface)) { |
| 3023 |
result = hso_stop_serial_device(serial_table[i]); |
| 3024 |
if (result) |
| 3025 |
goto out; |
| 3026 |
} |
| 3027 |
} |
| 3028 |
|
| 3029 |
/* Stop all network ports */ |
| 3030 |
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { |
| 3031 |
if (network_table[i] && |
| 3032 |
(network_table[i]->interface == iface)) { |
| 3033 |
result = hso_stop_net_device(network_table[i]); |
| 3034 |
if (result) |
| 3035 |
goto out; |
| 3036 |
} |
| 3037 |
} |
| 3038 |
|
| 3039 |
out: |
| 3040 |
return 0; |
| 3041 |
} |
| 3042 |
|
| 3043 |
/* called by kernel when we need to resume device */ |
| 3044 |
static int hso_resume(struct usb_interface *iface) |
| 3045 |
{ |
| 3046 |
int i, result = 0; |
| 3047 |
struct hso_net *hso_net; |
| 3048 |
|
| 3049 |
/* Start all serial ports */ |
| 3050 |
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { |
| 3051 |
if (serial_table[i] && (serial_table[i]->interface == iface)) { |
| 3052 |
if (dev2ser(serial_table[i])->port.count) { |
| 3053 |
result = |
| 3054 |
hso_start_serial_device(serial_table[i], GFP_NOIO); |
| 3055 |
hso_kick_transmit(dev2ser(serial_table[i])); |
| 3056 |
if (result) |
| 3057 |
goto out; |
| 3058 |
} |
| 3059 |
} |
| 3060 |
} |
| 3061 |
|
| 3062 |
/* Start all network ports */ |
| 3063 |
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { |
| 3064 |
if (network_table[i] && |
| 3065 |
(network_table[i]->interface == iface)) { |
| 3066 |
hso_net = dev2net(network_table[i]); |
| 3067 |
if (hso_net->flags & IFF_UP) { |
| 3068 |
/* First transmit any lingering data, |
| 3069 |
then restart the device. */ |
| 3070 |
if (hso_net->skb_tx_buf) { |
| 3071 |
dev_dbg(&iface->dev, |
| 3072 |
"Transmitting" |
| 3073 |
" lingering data\n"); |
| 3074 |
hso_net_start_xmit(hso_net->skb_tx_buf, |
| 3075 |
hso_net->net); |
| 3076 |
hso_net->skb_tx_buf = NULL; |
| 3077 |
} |
| 3078 |
result = hso_start_net_device(network_table[i]); |
| 3079 |
if (result) |
| 3080 |
goto out; |
| 3081 |
} |
| 3082 |
} |
| 3083 |
} |
| 3084 |
|
| 3085 |
out: |
| 3086 |
return result; |
| 3087 |
} |
| 3088 |
|
| 3089 |
static void hso_serial_ref_free(struct kref *ref) |
| 3090 |
{ |
| 3091 |
struct hso_device *hso_dev = container_of(ref, struct hso_device, ref); |
| 3092 |
|
| 3093 |
hso_free_serial_device(hso_dev); |
| 3094 |
} |
| 3095 |
|
| 3096 |
static void hso_free_interface(struct usb_interface *interface) |
| 3097 |
{ |
| 3098 |
struct hso_serial *serial; |
| 3099 |
int i; |
| 3100 |
|
| 3101 |
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { |
| 3102 |
if (serial_table[i] && |
| 3103 |
(serial_table[i]->interface == interface)) { |
| 3104 |
serial = dev2ser(serial_table[i]); |
| 3105 |
tty_port_tty_hangup(&serial->port, false); |
| 3106 |
mutex_lock(&serial->parent->mutex); |
| 3107 |
serial->parent->usb_gone = 1; |
| 3108 |
mutex_unlock(&serial->parent->mutex); |
| 3109 |
cancel_work_sync(&serial_table[i]->async_put_intf); |
| 3110 |
cancel_work_sync(&serial_table[i]->async_get_intf); |
| 3111 |
hso_serial_tty_unregister(serial); |
| 3112 |
kref_put(&serial->parent->ref, hso_serial_ref_free); |
| 3113 |
} |
| 3114 |
} |
| 3115 |
|
| 3116 |
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) { |
| 3117 |
if (network_table[i] && |
| 3118 |
(network_table[i]->interface == interface)) { |
| 3119 |
struct rfkill *rfk = dev2net(network_table[i])->rfkill; |
| 3120 |
/* hso_stop_net_device doesn't stop the net queue since |
| 3121 |
* traffic needs to start it again when suspended */ |
| 3122 |
netif_stop_queue(dev2net(network_table[i])->net); |
| 3123 |
hso_stop_net_device(network_table[i]); |
| 3124 |
cancel_work_sync(&network_table[i]->async_put_intf); |
| 3125 |
cancel_work_sync(&network_table[i]->async_get_intf); |
| 3126 |
if (rfk) { |
| 3127 |
rfkill_unregister(rfk); |
| 3128 |
rfkill_destroy(rfk); |
| 3129 |
} |
| 3130 |
hso_free_net_device(network_table[i]); |
| 3131 |
} |
| 3132 |
} |
| 3133 |
} |
| 3134 |
|
| 3135 |
/* Helper functions */ |
| 3136 |
|
| 3137 |
/* Get the endpoint ! */ |
| 3138 |
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf, |
| 3139 |
int type, int dir) |
| 3140 |
{ |
| 3141 |
int i; |
| 3142 |
struct usb_host_interface *iface = intf->cur_altsetting; |
| 3143 |
struct usb_endpoint_descriptor *endp; |
| 3144 |
|
| 3145 |
for (i = 0; i < iface->desc.bNumEndpoints; i++) { |
| 3146 |
endp = &iface->endpoint[i].desc; |
| 3147 |
if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) && |
| 3148 |
(usb_endpoint_type(endp) == type)) |
| 3149 |
return endp; |
| 3150 |
} |
| 3151 |
|
| 3152 |
return NULL; |
| 3153 |
} |
| 3154 |
|
| 3155 |
/* Get the byte that describes which ports are enabled */ |
| 3156 |
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports) |
| 3157 |
{ |
| 3158 |
int i; |
| 3159 |
struct usb_host_interface *iface = intf->cur_altsetting; |
| 3160 |
|
| 3161 |
if (iface->extralen == 3) { |
| 3162 |
*ports = iface->extra[2]; |
| 3163 |
return 0; |
| 3164 |
} |
| 3165 |
|
| 3166 |
for (i = 0; i < iface->desc.bNumEndpoints; i++) { |
| 3167 |
if (iface->endpoint[i].extralen == 3) { |
| 3168 |
*ports = iface->endpoint[i].extra[2]; |
| 3169 |
return 0; |
| 3170 |
} |
| 3171 |
} |
| 3172 |
|
| 3173 |
return -1; |
| 3174 |
} |
| 3175 |
|
| 3176 |
/* interrupt urb needs to be submitted, used for serial read of muxed port */ |
| 3177 |
static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int, |
| 3178 |
struct usb_device *usb, gfp_t gfp) |
| 3179 |
{ |
| 3180 |
int result; |
| 3181 |
|
| 3182 |
usb_fill_int_urb(shared_int->shared_intr_urb, usb, |
| 3183 |
usb_rcvintpipe(usb, |
| 3184 |
shared_int->intr_endp->bEndpointAddress & 0x7F), |
| 3185 |
shared_int->shared_intr_buf, |
| 3186 |
1, |
| 3187 |
intr_callback, shared_int, |
| 3188 |
shared_int->intr_endp->bInterval); |
| 3189 |
|
| 3190 |
result = usb_submit_urb(shared_int->shared_intr_urb, gfp); |
| 3191 |
if (result) |
| 3192 |
dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__, |
| 3193 |
result); |
| 3194 |
|
| 3195 |
return result; |
| 3196 |
} |
| 3197 |
|
| 3198 |
/* operations setup of the serial interface */ |
| 3199 |
static const struct tty_operations hso_serial_ops = { |
| 3200 |
.open = hso_serial_open, |
| 3201 |
.close = hso_serial_close, |
| 3202 |
.write = hso_serial_write, |
| 3203 |
.write_room = hso_serial_write_room, |
| 3204 |
.cleanup = hso_serial_cleanup, |
| 3205 |
.ioctl = hso_serial_ioctl, |
| 3206 |
.set_termios = hso_serial_set_termios, |
| 3207 |
.chars_in_buffer = hso_serial_chars_in_buffer, |
| 3208 |
.tiocmget = hso_serial_tiocmget, |
| 3209 |
.tiocmset = hso_serial_tiocmset, |
| 3210 |
.get_icount = hso_get_count, |
| 3211 |
.unthrottle = hso_unthrottle |
| 3212 |
}; |
| 3213 |
|
| 3214 |
static struct usb_driver hso_driver = { |
| 3215 |
.name = driver_name, |
| 3216 |
.probe = hso_probe, |
| 3217 |
.disconnect = hso_disconnect, |
| 3218 |
.id_table = hso_ids, |
| 3219 |
.suspend = hso_suspend, |
| 3220 |
.resume = hso_resume, |
| 3221 |
.reset_resume = hso_resume, |
| 3222 |
.supports_autosuspend = 1, |
| 3223 |
.disable_hub_initiated_lpm = 1, |
| 3224 |
}; |
| 3225 |
|
| 3226 |
static int __init hso_init(void) |
| 3227 |
{ |
| 3228 |
int result; |
| 3229 |
|
| 3230 |
/* allocate our driver using the proper amount of supported minors */ |
| 3231 |
tty_drv = tty_alloc_driver(HSO_SERIAL_TTY_MINORS, TTY_DRIVER_REAL_RAW | |
| 3232 |
TTY_DRIVER_DYNAMIC_DEV); |
| 3233 |
if (IS_ERR(tty_drv)) |
| 3234 |
return PTR_ERR(tty_drv); |
| 3235 |
|
| 3236 |
/* fill in all needed values */ |
| 3237 |
tty_drv->driver_name = driver_name; |
| 3238 |
tty_drv->name = tty_filename; |
| 3239 |
|
| 3240 |
/* if major number is provided as parameter, use that one */ |
| 3241 |
if (tty_major) |
| 3242 |
tty_drv->major = tty_major; |
| 3243 |
|
| 3244 |
tty_drv->minor_start = 0; |
| 3245 |
tty_drv->type = TTY_DRIVER_TYPE_SERIAL; |
| 3246 |
tty_drv->subtype = SERIAL_TYPE_NORMAL; |
| 3247 |
tty_drv->init_termios = tty_std_termios; |
| 3248 |
hso_init_termios(&tty_drv->init_termios); |
| 3249 |
tty_set_operations(tty_drv, &hso_serial_ops); |
| 3250 |
|
| 3251 |
/* register the tty driver */ |
| 3252 |
result = tty_register_driver(tty_drv); |
| 3253 |
if (result) { |
| 3254 |
pr_err("%s - tty_register_driver failed(%d)\n", |
| 3255 |
__func__, result); |
| 3256 |
goto err_free_tty; |
| 3257 |
} |
| 3258 |
|
| 3259 |
/* register this module as an usb driver */ |
| 3260 |
result = usb_register(&hso_driver); |
| 3261 |
if (result) { |
| 3262 |
pr_err("Could not register hso driver - error: %d\n", result); |
| 3263 |
goto err_unreg_tty; |
| 3264 |
} |
| 3265 |
|
| 3266 |
/* done */ |
| 3267 |
return 0; |
| 3268 |
err_unreg_tty: |
| 3269 |
tty_unregister_driver(tty_drv); |
| 3270 |
err_free_tty: |
| 3271 |
tty_driver_kref_put(tty_drv); |
| 3272 |
return result; |
| 3273 |
} |
| 3274 |
|
| 3275 |
static void __exit hso_exit(void) |
| 3276 |
{ |
| 3277 |
tty_unregister_driver(tty_drv); |
| 3278 |
/* deregister the usb driver */ |
| 3279 |
usb_deregister(&hso_driver); |
| 3280 |
tty_driver_kref_put(tty_drv); |
| 3281 |
} |
| 3282 |
|
| 3283 |
/* Module definitions */ |
| 3284 |
module_init(hso_init); |
| 3285 |
module_exit(hso_exit); |
| 3286 |
|
| 3287 |
MODULE_AUTHOR(MOD_AUTHOR); |
| 3288 |
MODULE_DESCRIPTION(MOD_DESCRIPTION); |
| 3289 |
MODULE_LICENSE("GPL"); |
| 3290 |
|
| 3291 |
/* change the debug level (eg: insmod hso.ko debug=0x04) */ |
| 3292 |
MODULE_PARM_DESC(debug, "debug level mask [0x01 | 0x02 | 0x04 | 0x08 | 0x10]"); |
| 3293 |
module_param(debug, int, 0644); |
| 3294 |
|
| 3295 |
/* set the major tty number (eg: insmod hso.ko tty_major=245) */ |
| 3296 |
MODULE_PARM_DESC(tty_major, "Set the major tty number"); |
| 3297 |
module_param(tty_major, int, 0644); |
| 3298 |
|
| 3299 |
/* disable network interface (eg: insmod hso.ko disable_net=1) */ |
| 3300 |
MODULE_PARM_DESC(disable_net, "Disable the network interface"); |
| 3301 |
module_param(disable_net, int, 0644); |