Debian Codegraph @

arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2015 Andrea Merello <[email protected]>
4 * Copyright (C) 2017 Alexander Graf <[email protected]>
5 *
6 * Based on zynq-zed.dts which is:
7 * Copyright (C) 2011 - 2014 Xilinx
8 * Copyright (C) 2012 National Instruments Corp.
9 *
10 */
11
12 /dts-v1/;
13 /include/ "zynq-7000.dtsi"
14
15 / {
16 compatible = "xlnx,zynq-7000";
17
18 aliases {
19 ethernet0 = &gem0;
20 serial0 = &uart1;
21 serial1 = &uart0;
22 mmc0 = &sdhci0;
23 };
24
25 memory@0 {
26 device_type = "memory";
27 reg = <0x0 0x40000000>;
28 };
29
30 chosen {
31 stdout-path = "serial0:115200n8";
32 };
33
34 gpio-leds {
35 compatible = "gpio-leds";
36 usr-led1 {
37 label = "usr-led1";
38 gpios = <&gpio0 0x0 0x1>;
39 default-state = "off";
40 };
41
42 usr-led2 {
43 label = "usr-led2";
44 gpios = <&gpio0 0x9 0x1>;
45 default-state = "off";
46 };
47 };
48
49 gpio-keys {
50 compatible = "gpio-keys";
51 autorepeat;
52 key {
53 label = "K1";
54 gpios = <&gpio0 0x32 0x1>;
55 linux,code = <0x66>;
56 wakeup-source;
57 autorepeat;
58 };
59 };
60 };
61
62 &clkc {
63 ps-clk-frequency = <33333333>;
64 };
65
66 &qspi {
67 bootph-all;
68 status = "okay";
69 };
70
71 &gem0 {
72 status = "okay";
73 phy-mode = "rgmii-id";
74 phy-handle = <&ethernet_phy>;
75
76 ethernet_phy: ethernet-phy@0 {
77 };
78 };
79
80 &sdhci0 {
81 bootph-all;
82 status = "okay";
83 };
84
85 &uart0 {
86 bootph-all;
87 status = "okay";
88 };
89
90 &uart1 {
91 bootph-all;
92 status = "okay";
93 };
94
95 &usb0 {
96 status = "okay";
97 dr_mode = "host";
98 };
99
100 &can0 {
101 status = "okay";
102 };
103
104 &i2c0 {
105 status = "okay";
106 clock-frequency = <400000>;
107
108 temperature-sensor@49 {
109 status = "okay";
110 compatible = "st,stlm75";
111 reg = <0x49>;
112 };
113
114 accelerometer@53 {
115 compatible = "adi,adxl345";
116 reg = <0x53>;
117 interrupt-parent = <&intc>;
118 interrupts = <0x0 0x1e 0x4>;
119 };
120 };