Debian Codegraph @

arch/arm/boot/dts/xilinx/zynq-zed.dts

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2011 - 2014 Xilinx
4 * Copyright (C) 2012 National Instruments Corp.
5 */
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
8
9 / {
10 model = "Avnet ZedBoard board";
11 compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
12
13 aliases {
14 ethernet0 = &gem0;
15 serial0 = &uart1;
16 spi0 = &qspi;
17 mmc0 = &sdhci0;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x20000000>;
23 };
24
25 chosen {
26 bootargs = "";
27 stdout-path = "serial0:115200n8";
28 };
29
30 usb_phy0: phy0 {
31 compatible = "usb-nop-xceiv";
32 #phy-cells = <0>;
33 };
34 };
35
36 &clkc {
37 ps-clk-frequency = <33333333>;
38 };
39
40 &gem0 {
41 status = "okay";
42 phy-mode = "rgmii-id";
43 phy-handle = <&ethernet_phy>;
44
45 ethernet_phy: ethernet-phy@0 {
46 reg = <0>;
47 };
48 };
49
50 &qspi {
51 bootph-all;
52 status = "okay";
53 num-cs = <1>;
54 flash@0 {
55 compatible = "jedec,spi-nor";
56 reg = <0>;
57 spi-tx-bus-width = <1>;
58 spi-rx-bus-width = <4>;
59 spi-max-frequency = <50000000>;
60 m25p,fast-read;
61 partitions {
62 compatible = "fixed-partitions";
63 #address-cells = <1>;
64 #size-cells = <1>;
65 partition@0 {
66 label = "qspi-fsbl-uboot";
67 reg = <0x0 0x100000>;
68 };
69 partition@100000 {
70 label = "qspi-linux";
71 reg = <0x100000 0x500000>;
72 };
73 partition@600000 {
74 label = "qspi-device-tree";
75 reg = <0x600000 0x20000>;
76 };
77 partition@620000 {
78 label = "qspi-rootfs";
79 reg = <0x620000 0x5e0000>;
80 };
81 partition@c00000 {
82 label = "qspi-bitstream";
83 reg = <0xc00000 0x400000>;
84 };
85 };
86 };
87 };
88
89 &sdhci0 {
90 bootph-all;
91 status = "okay";
92 };
93
94 &uart1 {
95 bootph-all;
96 status = "okay";
97 };
98
99 &usb0 {
100 status = "okay";
101 dr_mode = "host";
102 usb-phy = <&usb_phy0>;
103 };