Debian Codegraph @

arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Xilinx ZC770 XM011 board DTS
4 *
5 * Copyright (C) 2013-2018 Xilinx, Inc.
6 */
7 /dts-v1/;
8 #include "zynq-7000.dtsi"
9
10 / {
11 model = "Xilinx ZC770 XM011 board";
12 compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
13
14 aliases {
15 i2c0 = &i2c1;
16 serial0 = &uart1;
17 spi0 = &spi0;
18 };
19
20 chosen {
21 bootargs = "";
22 stdout-path = "serial0:115200n8";
23 };
24
25 memory@0 {
26 device_type = "memory";
27 reg = <0x0 0x40000000>;
28 };
29
30 usb_phy1: phy1 {
31 compatible = "usb-nop-xceiv";
32 #phy-cells = <0>;
33 };
34 };
35
36 &can0 {
37 status = "okay";
38 };
39
40 &i2c1 {
41 status = "okay";
42 clock-frequency = <400000>;
43
44 eeprom: eeprom@52 {
45 compatible = "atmel,24c02";
46 reg = <0x52>;
47 };
48 };
49
50 &nfc0 {
51 status = "okay";
52 #address-cells = <1>;
53 #size-cells = <0>;
54 nand@0 {
55 reg = <0>;
56 partitions {
57 compatible = "fixed-partitions";
58 #address-cells = <1>;
59 #size-cells = <1>;
60 partition@0 {
61 label = "nand-fsbl-uboot";
62 reg = <0x0 0x1000000>;
63 };
64 partition@1000000 {
65 label = "nand-linux";
66 reg = <0x1000000 0x2000000>;
67 };
68 partition@3000000 {
69 label = "nand-rootfs";
70 reg = <0x3000000 0x200000>;
71 };
72 };
73 };
74 };
75
76 &smcc {
77 status = "okay";
78 };
79
80 &spi0 {
81 status = "okay";
82 num-cs = <4>;
83 is-decoded-cs = <0>;
84 };
85
86 &uart1 {
87 bootph-all;
88 status = "okay";
89 };
90
91 &usb1 {
92 status = "okay";
93 dr_mode = "host";
94 usb-phy = <&usb_phy1>;
95 };