Debian Codegraph @

arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Xilinx ZC770 XM013 board DTS
4 *
5 * Copyright (C) 2013 Xilinx, Inc.
6 */
7 /dts-v1/;
8 #include "zynq-7000.dtsi"
9
10 / {
11 model = "Xilinx ZC770 XM013 board";
12 compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
13
14 aliases {
15 ethernet0 = &gem1;
16 i2c0 = &i2c1;
17 serial0 = &uart0;
18 spi0 = &qspi;
19 spi1 = &spi0;
20 };
21
22 chosen {
23 bootargs = "";
24 stdout-path = "serial0:115200n8";
25 };
26
27 memory@0 {
28 device_type = "memory";
29 reg = <0x0 0x40000000>;
30 };
31 };
32
33 &can1 {
34 status = "okay";
35 };
36
37 &gem1 {
38 status = "okay";
39 phy-mode = "rgmii-id";
40 phy-handle = <&ethernet_phy>;
41
42 ethernet_phy: ethernet-phy@7 {
43 reg = <7>;
44 };
45 };
46
47 &i2c1 {
48 status = "okay";
49 clock-frequency = <400000>;
50
51 si570: clock-generator@55 {
52 #clock-cells = <0>;
53 compatible = "silabs,si570";
54 temperature-stability = <50>;
55 reg = <0x55>;
56 factory-fout = <156250000>;
57 clock-frequency = <148500000>;
58 };
59 };
60
61 &qspi {
62 status = "okay";
63 num-cs = <2>;
64 flash@0 {
65 compatible = "jedec,spi-nor";
66 reg = <0>, <1>;
67 parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */
68 spi-tx-bus-width = <1>;
69 spi-rx-bus-width = <4>;
70 spi-max-frequency = <50000000>;
71 partitions {
72 compatible = "fixed-partitions";
73 #address-cells = <1>;
74 #size-cells = <1>;
75 partition@0 {
76 label = "qspi-fsbl-uboot";
77 reg = <0x0 0x100000>;
78 };
79 partition@100000 {
80 label = "qspi-linux";
81 reg = <0x100000 0x500000>;
82 };
83 partition@600000 {
84 label = "qspi-device-tree";
85 reg = <0x600000 0x20000>;
86 };
87 partition@620000 {
88 label = "qspi-rootfs";
89 reg = <0x620000 0x5e0000>;
90 };
91 partition@c00000 {
92 label = "qspi-bitstream";
93 reg = <0xc00000 0x400000>;
94 };
95 };
96 };
97 };
98
99 &spi0 {
100 status = "okay";
101 num-cs = <4>;
102 is-decoded-cs = <0>;
103 eeprom: eeprom@2 {
104 compatible = "atmel,at25";
105 reg = <2>;
106 spi-max-frequency = <1000000>;
107 size = <8192>;
108 address-width = <16>;
109 pagesize = <32>;
110 };
111 };
112
113 &uart0 {
114 bootph-all;
115 status = "okay";
116 };