| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (C) 2011 - 2014 Xilinx |
| 4 |
* Copyright (C) 2012 National Instruments Corp. |
| 5 |
*/ |
| 6 |
/dts-v1/; |
| 7 |
#include "zynq-7000.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Xilinx ZC706 board"; |
| 11 |
compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
ethernet0 = &gem0; |
| 15 |
i2c0 = &i2c0; |
| 16 |
serial0 = &uart1; |
| 17 |
spi0 = &qspi; |
| 18 |
mmc0 = &sdhci0; |
| 19 |
nvmem0 = &eeprom; |
| 20 |
rtc0 = &rtc; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@0 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x0 0x40000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
bootargs = ""; |
| 30 |
stdout-path = "serial0:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
usb_phy0: phy0 { |
| 34 |
compatible = "usb-nop-xceiv"; |
| 35 |
#phy-cells = <0>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
&clkc { |
| 40 |
ps-clk-frequency = <33333333>; |
| 41 |
}; |
| 42 |
|
| 43 |
&gem0 { |
| 44 |
status = "okay"; |
| 45 |
phy-mode = "rgmii-id"; |
| 46 |
phy-handle = <ðernet_phy>; |
| 47 |
pinctrl-names = "default"; |
| 48 |
pinctrl-0 = <&pinctrl_gem0_default>; |
| 49 |
|
| 50 |
ethernet_phy: ethernet-phy@7 { |
| 51 |
reg = <7>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
&gpio0 { |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&pinctrl_gpio0_default>; |
| 58 |
}; |
| 59 |
|
| 60 |
&i2c0 { |
| 61 |
status = "okay"; |
| 62 |
clock-frequency = <400000>; |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&pinctrl_i2c0_default>; |
| 65 |
|
| 66 |
i2c-mux@74 { |
| 67 |
compatible = "nxp,pca9548"; |
| 68 |
#address-cells = <1>; |
| 69 |
#size-cells = <0>; |
| 70 |
reg = <0x74>; |
| 71 |
|
| 72 |
i2c@0 { |
| 73 |
#address-cells = <1>; |
| 74 |
#size-cells = <0>; |
| 75 |
reg = <0>; |
| 76 |
si570: clock-generator@5d { |
| 77 |
#clock-cells = <0>; |
| 78 |
compatible = "silabs,si570"; |
| 79 |
temperature-stability = <50>; |
| 80 |
reg = <0x5d>; |
| 81 |
factory-fout = <156250000>; |
| 82 |
clock-frequency = <148500000>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
i2c@1 { |
| 87 |
#address-cells = <1>; |
| 88 |
#size-cells = <0>; |
| 89 |
reg = <1>; |
| 90 |
adv7511: hdmi-tx@39 { |
| 91 |
compatible = "adi,adv7511"; |
| 92 |
reg = <0x39>; |
| 93 |
adi,input-depth = <8>; |
| 94 |
adi,input-colorspace = "yuv422"; |
| 95 |
adi,input-clock = "1x"; |
| 96 |
adi,input-style = <3>; |
| 97 |
adi,input-justification = "evenly"; |
| 98 |
}; |
| 99 |
}; |
| 100 |
|
| 101 |
i2c@2 { |
| 102 |
#address-cells = <1>; |
| 103 |
#size-cells = <0>; |
| 104 |
reg = <2>; |
| 105 |
eeprom: eeprom@54 { |
| 106 |
compatible = "atmel,24c08"; |
| 107 |
reg = <0x54>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
i2c@3 { |
| 112 |
#address-cells = <1>; |
| 113 |
#size-cells = <0>; |
| 114 |
reg = <3>; |
| 115 |
gpio@21 { |
| 116 |
compatible = "ti,tca6416"; |
| 117 |
reg = <0x21>; |
| 118 |
gpio-controller; |
| 119 |
#gpio-cells = <2>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
i2c@4 { |
| 124 |
#address-cells = <1>; |
| 125 |
#size-cells = <0>; |
| 126 |
reg = <4>; |
| 127 |
rtc: rtc@51 { |
| 128 |
compatible = "nxp,pcf8563"; |
| 129 |
reg = <0x51>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
i2c@7 { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <0>; |
| 136 |
reg = <7>; |
| 137 |
ucd90120@65 { |
| 138 |
compatible = "ti,ucd90120"; |
| 139 |
reg = <0x65>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
&pinctrl0 { |
| 146 |
pinctrl_gem0_default: gem0-default { |
| 147 |
mux { |
| 148 |
function = "ethernet0"; |
| 149 |
groups = "ethernet0_0_grp"; |
| 150 |
}; |
| 151 |
|
| 152 |
conf { |
| 153 |
groups = "ethernet0_0_grp"; |
| 154 |
slew-rate = <0>; |
| 155 |
power-source = <4>; |
| 156 |
}; |
| 157 |
|
| 158 |
conf-rx { |
| 159 |
pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; |
| 160 |
bias-high-impedance; |
| 161 |
low-power-disable; |
| 162 |
}; |
| 163 |
|
| 164 |
conf-tx { |
| 165 |
pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; |
| 166 |
low-power-enable; |
| 167 |
bias-disable; |
| 168 |
}; |
| 169 |
|
| 170 |
mux-mdio { |
| 171 |
function = "mdio0"; |
| 172 |
groups = "mdio0_0_grp"; |
| 173 |
}; |
| 174 |
|
| 175 |
conf-mdio { |
| 176 |
groups = "mdio0_0_grp"; |
| 177 |
slew-rate = <0>; |
| 178 |
power-source = <1>; |
| 179 |
bias-disable; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
pinctrl_gpio0_default: gpio0-default { |
| 184 |
mux { |
| 185 |
function = "gpio0"; |
| 186 |
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; |
| 187 |
}; |
| 188 |
|
| 189 |
conf { |
| 190 |
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; |
| 191 |
slew-rate = <0>; |
| 192 |
power-source = <1>; |
| 193 |
}; |
| 194 |
|
| 195 |
conf-pull-up { |
| 196 |
pins = "MIO46", "MIO47"; |
| 197 |
bias-pull-up; |
| 198 |
}; |
| 199 |
|
| 200 |
conf-pull-none { |
| 201 |
pins = "MIO7"; |
| 202 |
bias-disable; |
| 203 |
}; |
| 204 |
}; |
| 205 |
|
| 206 |
pinctrl_i2c0_default: i2c0-default { |
| 207 |
mux { |
| 208 |
groups = "i2c0_10_grp"; |
| 209 |
function = "i2c0"; |
| 210 |
}; |
| 211 |
|
| 212 |
conf { |
| 213 |
groups = "i2c0_10_grp"; |
| 214 |
bias-pull-up; |
| 215 |
slew-rate = <0>; |
| 216 |
power-source = <1>; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
pinctrl_sdhci0_default: sdhci0-default { |
| 221 |
mux { |
| 222 |
groups = "sdio0_2_grp"; |
| 223 |
function = "sdio0"; |
| 224 |
}; |
| 225 |
|
| 226 |
conf { |
| 227 |
groups = "sdio0_2_grp"; |
| 228 |
slew-rate = <0>; |
| 229 |
power-source = <1>; |
| 230 |
bias-disable; |
| 231 |
}; |
| 232 |
|
| 233 |
mux-cd { |
| 234 |
groups = "gpio0_14_grp"; |
| 235 |
function = "sdio0_cd"; |
| 236 |
}; |
| 237 |
|
| 238 |
conf-cd { |
| 239 |
groups = "gpio0_14_grp"; |
| 240 |
bias-high-impedance; |
| 241 |
bias-pull-up; |
| 242 |
slew-rate = <0>; |
| 243 |
power-source = <1>; |
| 244 |
}; |
| 245 |
|
| 246 |
mux-wp { |
| 247 |
groups = "gpio0_15_grp"; |
| 248 |
function = "sdio0_wp"; |
| 249 |
}; |
| 250 |
|
| 251 |
conf-wp { |
| 252 |
groups = "gpio0_15_grp"; |
| 253 |
bias-high-impedance; |
| 254 |
bias-pull-up; |
| 255 |
slew-rate = <0>; |
| 256 |
power-source = <1>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
pinctrl_uart1_default: uart1-default { |
| 261 |
mux { |
| 262 |
groups = "uart1_10_grp"; |
| 263 |
function = "uart1"; |
| 264 |
}; |
| 265 |
|
| 266 |
conf { |
| 267 |
groups = "uart1_10_grp"; |
| 268 |
slew-rate = <0>; |
| 269 |
power-source = <1>; |
| 270 |
}; |
| 271 |
|
| 272 |
conf-rx { |
| 273 |
pins = "MIO49"; |
| 274 |
bias-high-impedance; |
| 275 |
}; |
| 276 |
|
| 277 |
conf-tx { |
| 278 |
pins = "MIO48"; |
| 279 |
bias-disable; |
| 280 |
}; |
| 281 |
}; |
| 282 |
|
| 283 |
pinctrl_usb0_default: usb0-default { |
| 284 |
mux { |
| 285 |
groups = "usb0_0_grp"; |
| 286 |
function = "usb0"; |
| 287 |
}; |
| 288 |
|
| 289 |
conf { |
| 290 |
groups = "usb0_0_grp"; |
| 291 |
slew-rate = <0>; |
| 292 |
power-source = <1>; |
| 293 |
}; |
| 294 |
|
| 295 |
conf-rx { |
| 296 |
pins = "MIO29", "MIO31", "MIO36"; |
| 297 |
bias-high-impedance; |
| 298 |
}; |
| 299 |
|
| 300 |
conf-tx { |
| 301 |
pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", |
| 302 |
"MIO35", "MIO37", "MIO38", "MIO39"; |
| 303 |
bias-disable; |
| 304 |
}; |
| 305 |
}; |
| 306 |
}; |
| 307 |
|
| 308 |
&qspi { |
| 309 |
bootph-all; |
| 310 |
status = "okay"; |
| 311 |
num-cs = <2>; |
| 312 |
flash@0 { |
| 313 |
compatible = "jedec,spi-nor"; |
| 314 |
reg = <0>, <1>; |
| 315 |
parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */ |
| 316 |
spi-tx-bus-width = <1>; |
| 317 |
spi-rx-bus-width = <4>; |
| 318 |
spi-max-frequency = <50000000>; |
| 319 |
partitions { |
| 320 |
compatible = "fixed-partitions"; |
| 321 |
#address-cells = <1>; |
| 322 |
#size-cells = <1>; |
| 323 |
partition@0 { |
| 324 |
label = "qspi-fsbl-uboot"; |
| 325 |
reg = <0x0 0x100000>; |
| 326 |
}; |
| 327 |
partition@100000 { |
| 328 |
label = "qspi-linux"; |
| 329 |
reg = <0x100000 0x500000>; |
| 330 |
}; |
| 331 |
partition@600000 { |
| 332 |
label = "qspi-device-tree"; |
| 333 |
reg = <0x600000 0x20000>; |
| 334 |
}; |
| 335 |
partition@620000 { |
| 336 |
label = "qspi-rootfs"; |
| 337 |
reg = <0x620000 0x5e0000>; |
| 338 |
}; |
| 339 |
partition@c00000 { |
| 340 |
label = "qspi-bitstream"; |
| 341 |
reg = <0xc00000 0x400000>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
}; |
| 345 |
}; |
| 346 |
|
| 347 |
&sdhci0 { |
| 348 |
bootph-all; |
| 349 |
status = "okay"; |
| 350 |
pinctrl-names = "default"; |
| 351 |
pinctrl-0 = <&pinctrl_sdhci0_default>; |
| 352 |
}; |
| 353 |
|
| 354 |
&uart1 { |
| 355 |
bootph-all; |
| 356 |
status = "okay"; |
| 357 |
pinctrl-names = "default"; |
| 358 |
pinctrl-0 = <&pinctrl_uart1_default>; |
| 359 |
}; |
| 360 |
|
| 361 |
&usb0 { |
| 362 |
status = "okay"; |
| 363 |
dr_mode = "host"; |
| 364 |
usb-phy = <&usb_phy0>; |
| 365 |
pinctrl-names = "default"; |
| 366 |
pinctrl-0 = <&pinctrl_usb0_default>; |
| 367 |
}; |