Debian Codegraph @

arch/arm/boot/dts/xilinx/zynq-7000.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2011 - 2014 Xilinx
4 */
5
6 / {
7 #address-cells = <1>;
8 #size-cells = <1>;
9 compatible = "xlnx,zynq-7000";
10
11 options {
12 u-boot {
13 compatible = "u-boot,config";
14 bootscr-address = /bits/ 64 <0x3000000>;
15 };
16 };
17
18 cpus {
19 #address-cells = <1>;
20 #size-cells = <0>;
21
22 cpu0: cpu@0 {
23 compatible = "arm,cortex-a9";
24 device_type = "cpu";
25 reg = <0>;
26 clocks = <&clkc 3>;
27 clock-latency = <1000>;
28 cpu0-supply = <&regulator_vccpint>;
29 operating-points = <
30 /* kHz uV */
31 666667 1000000
32 333334 1000000
33 >;
34 };
35
36 cpu1: cpu@1 {
37 compatible = "arm,cortex-a9";
38 device_type = "cpu";
39 reg = <1>;
40 clocks = <&clkc 3>;
41 };
42 };
43
44 fpga_full: fpga-region {
45 compatible = "fpga-region";
46 fpga-mgr = <&devcfg>;
47 #address-cells = <1>;
48 #size-cells = <1>;
49 ranges;
50 };
51
52 pmu@f8891000 {
53 compatible = "arm,cortex-a9-pmu";
54 interrupts = <0 5 4>, <0 6 4>;
55 interrupt-parent = <&intc>;
56 reg = <0xf8891000 0x1000>,
57 <0xf8893000 0x1000>;
58 };
59
60 regulator_vccpint: fixedregulator {
61 compatible = "regulator-fixed";
62 regulator-name = "VCCPINT";
63 regulator-min-microvolt = <1000000>;
64 regulator-max-microvolt = <1000000>;
65 regulator-boot-on;
66 regulator-always-on;
67 };
68
69 replicator {
70 compatible = "arm,coresight-static-replicator";
71 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
72 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
73
74 out-ports {
75 #address-cells = <1>;
76 #size-cells = <0>;
77
78 /* replicator output ports */
79 port@0 {
80 reg = <0>;
81 replicator_out_port0: endpoint {
82 remote-endpoint = <&tpiu_in_port>;
83 };
84 };
85 port@1 {
86 reg = <1>;
87 replicator_out_port1: endpoint {
88 remote-endpoint = <&etb_in_port>;
89 };
90 };
91 };
92 in-ports {
93 /* replicator input port */
94 port {
95 replicator_in_port0: endpoint {
96 remote-endpoint = <&funnel_out_port>;
97 };
98 };
99 };
100 };
101
102 amba: axi {
103 bootph-all;
104 compatible = "simple-bus";
105 #address-cells = <1>;
106 #size-cells = <1>;
107 interrupt-parent = <&intc>;
108 ranges;
109
110 adc: adc@f8007100 {
111 compatible = "xlnx,zynq-xadc-1.00.a";
112 reg = <0xf8007100 0x20>;
113 interrupts = <0 7 4>;
114 interrupt-parent = <&intc>;
115 clocks = <&clkc 12>;
116 };
117
118 can0: can@e0008000 {
119 compatible = "xlnx,zynq-can-1.0";
120 status = "disabled";
121 clocks = <&clkc 19>, <&clkc 36>;
122 clock-names = "can_clk", "pclk";
123 reg = <0xe0008000 0x1000>;
124 interrupts = <0 28 4>;
125 interrupt-parent = <&intc>;
126 tx-fifo-depth = <0x40>;
127 rx-fifo-depth = <0x40>;
128 };
129
130 can1: can@e0009000 {
131 compatible = "xlnx,zynq-can-1.0";
132 status = "disabled";
133 clocks = <&clkc 20>, <&clkc 37>;
134 clock-names = "can_clk", "pclk";
135 reg = <0xe0009000 0x1000>;
136 interrupts = <0 51 4>;
137 interrupt-parent = <&intc>;
138 tx-fifo-depth = <0x40>;
139 rx-fifo-depth = <0x40>;
140 };
141
142 gpio0: gpio@e000a000 {
143 compatible = "xlnx,zynq-gpio-1.0";
144 #gpio-cells = <2>;
145 clocks = <&clkc 42>;
146 gpio-controller;
147 interrupt-controller;
148 #interrupt-cells = <2>;
149 interrupt-parent = <&intc>;
150 interrupts = <0 20 4>;
151 reg = <0xe000a000 0x1000>;
152 };
153
154 i2c0: i2c@e0004000 {
155 compatible = "cdns,i2c-r1p10";
156 status = "disabled";
157 clocks = <&clkc 38>;
158 interrupt-parent = <&intc>;
159 interrupts = <0 25 4>;
160 clock-frequency = <400000>;
161 reg = <0xe0004000 0x1000>;
162 #address-cells = <1>;
163 #size-cells = <0>;
164 };
165
166 i2c1: i2c@e0005000 {
167 compatible = "cdns,i2c-r1p10";
168 status = "disabled";
169 clocks = <&clkc 39>;
170 interrupt-parent = <&intc>;
171 interrupts = <0 48 4>;
172 clock-frequency = <400000>;
173 reg = <0xe0005000 0x1000>;
174 #address-cells = <1>;
175 #size-cells = <0>;
176 };
177
178 intc: interrupt-controller@f8f01000 {
179 compatible = "arm,cortex-a9-gic";
180 #interrupt-cells = <3>;
181 interrupt-controller;
182 reg = <0xF8F01000 0x1000>,
183 <0xF8F00100 0x100>;
184 };
185
186 L2: cache-controller@f8f02000 {
187 compatible = "arm,pl310-cache";
188 reg = <0xF8F02000 0x1000>;
189 interrupts = <0 2 4>;
190 arm,data-latency = <3 2 2>;
191 arm,tag-latency = <2 2 2>;
192 cache-unified;
193 cache-level = <2>;
194 };
195
196 mc: memory-controller@f8006000 {
197 compatible = "xlnx,zynq-ddrc-a05";
198 reg = <0xf8006000 0x1000>;
199 };
200
201 ocm: sram@fffc0000 {
202 compatible = "mmio-sram";
203 reg = <0xfffc0000 0x10000>;
204 #address-cells = <1>;
205 #size-cells = <1>;
206 ranges = <0 0xfffc0000 0x10000>;
207 ocm-sram@0 {
208 reg = <0x0 0x10000>;
209 };
210 };
211
212 uart0: serial@e0000000 {
213 compatible = "xlnx,xuartps", "cdns,uart-r1p8";
214 status = "disabled";
215 clocks = <&clkc 23>, <&clkc 40>;
216 clock-names = "uart_clk", "pclk";
217 reg = <0xE0000000 0x1000>;
218 interrupts = <0 27 4>;
219 };
220
221 uart1: serial@e0001000 {
222 compatible = "xlnx,xuartps", "cdns,uart-r1p8";
223 status = "disabled";
224 clocks = <&clkc 24>, <&clkc 41>;
225 clock-names = "uart_clk", "pclk";
226 reg = <0xE0001000 0x1000>;
227 interrupts = <0 50 4>;
228 };
229
230 spi0: spi@e0006000 {
231 compatible = "xlnx,zynq-spi-r1p6";
232 reg = <0xe0006000 0x1000>;
233 status = "disabled";
234 interrupt-parent = <&intc>;
235 interrupts = <0 26 4>;
236 clocks = <&clkc 25>, <&clkc 34>;
237 clock-names = "ref_clk", "pclk";
238 #address-cells = <1>;
239 #size-cells = <0>;
240 };
241
242 spi1: spi@e0007000 {
243 compatible = "xlnx,zynq-spi-r1p6";
244 reg = <0xe0007000 0x1000>;
245 status = "disabled";
246 interrupt-parent = <&intc>;
247 interrupts = <0 49 4>;
248 clocks = <&clkc 26>, <&clkc 35>;
249 clock-names = "ref_clk", "pclk";
250 #address-cells = <1>;
251 #size-cells = <0>;
252 };
253
254 qspi: spi@e000d000 {
255 compatible = "xlnx,zynq-qspi-1.0";
256 reg = <0xe000d000 0x1000>;
257 interrupt-parent = <&intc>;
258 interrupts = <0 19 4>;
259 clocks = <&clkc 10>, <&clkc 43>;
260 clock-names = "ref_clk", "pclk";
261 status = "disabled";
262 #address-cells = <1>;
263 #size-cells = <0>;
264 };
265
266 gem0: ethernet@e000b000 {
267 compatible = "xlnx,zynq-gem", "cdns,gem";
268 reg = <0xe000b000 0x1000>;
269 status = "disabled";
270 interrupts = <0 22 4>;
271 clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
272 clock-names = "pclk", "hclk", "tx_clk";
273 #address-cells = <1>;
274 #size-cells = <0>;
275 };
276
277 gem1: ethernet@e000c000 {
278 compatible = "xlnx,zynq-gem", "cdns,gem";
279 reg = <0xe000c000 0x1000>;
280 status = "disabled";
281 interrupts = <0 45 4>;
282 clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
283 clock-names = "pclk", "hclk", "tx_clk";
284 #address-cells = <1>;
285 #size-cells = <0>;
286 };
287
288 smcc: memory-controller@e000e000 {
289 compatible = "arm,pl353-smc-r2p1", "arm,primecell";
290 reg = <0xe000e000 0x0001000>;
291 status = "disabled";
292 clock-names = "memclk", "apb_pclk";
293 clocks = <&clkc 11>, <&clkc 44>;
294 ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
295 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
296 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
297 #address-cells = <2>;
298 #size-cells = <1>;
299 interrupt-parent = <&intc>;
300 interrupts = <0 18 4>;
301
302 nfc0: nand-controller@0,0 {
303 compatible = "arm,pl353-nand-r2p1";
304 reg = <0 0 0x1000000>;
305 status = "disabled";
306 };
307 nor0: flash@1,0 {
308 status = "disabled";
309 compatible = "cfi-flash";
310 reg = <1 0 0x2000000>;
311 };
312 };
313
314 sdhci0: mmc@e0100000 {
315 compatible = "arasan,sdhci-8.9a";
316 status = "disabled";
317 clock-names = "clk_xin", "clk_ahb";
318 clocks = <&clkc 21>, <&clkc 32>;
319 interrupt-parent = <&intc>;
320 interrupts = <0 24 4>;
321 reg = <0xe0100000 0x1000>;
322 };
323
324 sdhci1: mmc@e0101000 {
325 compatible = "arasan,sdhci-8.9a";
326 status = "disabled";
327 clock-names = "clk_xin", "clk_ahb";
328 clocks = <&clkc 22>, <&clkc 33>;
329 interrupt-parent = <&intc>;
330 interrupts = <0 47 4>;
331 reg = <0xe0101000 0x1000>;
332 };
333
334 slcr: slcr@f8000000 {
335 bootph-all;
336 #address-cells = <1>;
337 #size-cells = <1>;
338 compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
339 reg = <0xF8000000 0x1000>;
340 ranges;
341 clkc: clkc@100 {
342 bootph-all;
343 #clock-cells = <1>;
344 compatible = "xlnx,ps7-clkc";
345 fclk-enable = <0>;
346 clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
347 "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
348 "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
349 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
350 "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
351 "dma", "usb0_aper", "usb1_aper", "gem0_aper",
352 "gem1_aper", "sdio0_aper", "sdio1_aper",
353 "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
354 "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
355 "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
356 "dbg_trc", "dbg_apb";
357 reg = <0x100 0x100>;
358 };
359
360 rstc: rstc@200 {
361 compatible = "xlnx,zynq-reset";
362 reg = <0x200 0x48>;
363 #reset-cells = <1>;
364 syscon = <&slcr>;
365 };
366
367 pinctrl0: pinctrl@700 {
368 compatible = "xlnx,pinctrl-zynq";
369 reg = <0x700 0x200>;
370 syscon = <&slcr>;
371 };
372 };
373
374 dmac_s: dma-controller@f8003000 {
375 compatible = "arm,pl330", "arm,primecell";
376 reg = <0xf8003000 0x1000>;
377 interrupt-parent = <&intc>;
378 /*
379 * interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
380 * "dma4", "dma5", "dma6", "dma7";
381 */
382 interrupts = <0 13 4>,
383 <0 14 4>, <0 15 4>,
384 <0 16 4>, <0 17 4>,
385 <0 40 4>, <0 41 4>,
386 <0 42 4>, <0 43 4>;
387 #dma-cells = <1>;
388 clocks = <&clkc 27>;
389 clock-names = "apb_pclk";
390 };
391
392 devcfg: devcfg@f8007000 {
393 compatible = "xlnx,zynq-devcfg-1.0";
394 reg = <0xf8007000 0x100>;
395 interrupt-parent = <&intc>;
396 interrupts = <0 8 4>;
397 clocks = <&clkc 12>;
398 clock-names = "ref_clk";
399 syscon = <&slcr>;
400 };
401
402 global_timer: timer@f8f00200 {
403 compatible = "arm,cortex-a9-global-timer";
404 reg = <0xf8f00200 0x20>;
405 interrupts = <1 11 0x301>;
406 interrupt-parent = <&intc>;
407 clocks = <&clkc 4>;
408 };
409
410 ttc0: timer@f8001000 {
411 interrupt-parent = <&intc>;
412 interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
413 compatible = "cdns,ttc";
414 clocks = <&clkc 6>;
415 reg = <0xF8001000 0x1000>;
416 };
417
418 ttc1: timer@f8002000 {
419 interrupt-parent = <&intc>;
420 interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
421 compatible = "cdns,ttc";
422 clocks = <&clkc 6>;
423 reg = <0xF8002000 0x1000>;
424 };
425
426 scutimer: timer@f8f00600 {
427 bootph-all;
428 interrupt-parent = <&intc>;
429 interrupts = <1 13 0x301>;
430 compatible = "arm,cortex-a9-twd-timer";
431 reg = <0xf8f00600 0x20>;
432 clocks = <&clkc 4>;
433 };
434
435 usb0: usb@e0002000 {
436 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
437 status = "disabled";
438 clocks = <&clkc 28>;
439 interrupt-parent = <&intc>;
440 interrupts = <0 21 4>;
441 reg = <0xe0002000 0x1000>;
442 phy_type = "ulpi";
443 };
444
445 usb1: usb@e0003000 {
446 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
447 status = "disabled";
448 clocks = <&clkc 29>;
449 interrupt-parent = <&intc>;
450 interrupts = <0 44 4>;
451 reg = <0xe0003000 0x1000>;
452 phy_type = "ulpi";
453 };
454
455 watchdog0: watchdog@f8005000 {
456 clocks = <&clkc 45>;
457 compatible = "cdns,wdt-r1p2";
458 interrupt-parent = <&intc>;
459 interrupts = <0 9 1>;
460 reg = <0xf8005000 0x1000>;
461 timeout-sec = <10>;
462 };
463
464 etb@f8801000 {
465 compatible = "arm,coresight-etb10", "arm,primecell";
466 reg = <0xf8801000 0x1000>;
467 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
468 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
469 in-ports {
470 port {
471 etb_in_port: endpoint {
472 remote-endpoint = <&replicator_out_port1>;
473 };
474 };
475 };
476 };
477
478 tpiu@f8803000 {
479 compatible = "arm,coresight-tpiu", "arm,primecell";
480 reg = <0xf8803000 0x1000>;
481 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
482 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
483 in-ports {
484 port {
485 tpiu_in_port: endpoint {
486 remote-endpoint = <&replicator_out_port0>;
487 };
488 };
489 };
490 };
491
492 funnel@f8804000 {
493 compatible = "arm,coresight-static-funnel", "arm,primecell";
494 reg = <0xf8804000 0x1000>;
495 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
496 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
497
498 /* funnel output ports */
499 out-ports {
500 port {
501 funnel_out_port: endpoint {
502 remote-endpoint =
503 <&replicator_in_port0>;
504 };
505 };
506 };
507
508 in-ports {
509 #address-cells = <1>;
510 #size-cells = <0>;
511
512 /* funnel input ports */
513 port@0 {
514 reg = <0>;
515 funnel0_in_port0: endpoint {
516 remote-endpoint = <&ptm0_out_port>;
517 };
518 };
519
520 port@1 {
521 reg = <1>;
522 funnel0_in_port1: endpoint {
523 remote-endpoint = <&ptm1_out_port>;
524 };
525 };
526
527 port@2 {
528 reg = <2>;
529 funnel0_in_port2: endpoint {
530 };
531 };
532 /* The other input ports are not connect to anything */
533 };
534 };
535
536 ptm@f889c000 {
537 compatible = "arm,coresight-etm3x", "arm,primecell";
538 reg = <0xf889c000 0x1000>;
539 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
540 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
541 cpu = <&cpu0>;
542 out-ports {
543 port {
544 ptm0_out_port: endpoint {
545 remote-endpoint = <&funnel0_in_port0>;
546 };
547 };
548 };
549 };
550
551 ptm@f889d000 {
552 compatible = "arm,coresight-etm3x", "arm,primecell";
553 reg = <0xf889d000 0x1000>;
554 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
555 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
556 cpu = <&cpu1>;
557 out-ports {
558 port {
559 ptm1_out_port: endpoint {
560 remote-endpoint = <&funnel0_in_port1>;
561 };
562 };
563 };
564 };
565 };
566 };