Debian Codegraph @

doc/locale/ja/LC_MESSAGES/reference/command/output_format.po

raw
1 # -*- po -*-
2 # Japanese translations for 1.2.1 package.
3 # Copyright (C) 2009-2011, Brazil, Inc
4 # This file is distributed under the same license as the groonga package.
5 # Kouhei Sutou <[email protected]>, 2011.
6 #
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: 1.2.1\n"
10 "Report-Msgid-Bugs-To: \n"
11 "Language-Team: Japanese\n"
12 "Language: ja\n"
13 "MIME-Version: 1.0\n"
14 "Content-Type: text/plain; charset=UTF-8\n"
15 "Content-Transfer-Encoding: 8bit\n"
16 "Plural-Forms: nplurals=1; plural=0;\n"
17
18 msgid "Output format"
19 msgstr "出力形式"
20
21 msgid "Summary"
22 msgstr "概要"
23
24 msgid "Commands output their result as JSON, MessagePack, XML or TSV format."
25 msgstr "コマンドは実行結果をJSONまたはMessagePack、XML、TSVのどれかで出力します。"
26
27 msgid "JSON and MessagePack output have the same structure. XML and TSV are their original structure."
28 msgstr "JSONとMessagePackの出力は同じ構造になっています。XMLとTSVはそれぞれ独自の構造になっています。"
29
30 msgid "JSON or MessagePack is recommend format. XML is useful for visual result check. TSV is just for special use. Normally you doesn't need to use TSV."
31 msgstr "JSONまたはMessagePackの利用を推奨します。XMLは目視で結果を確認する時に便利です。TSVは特殊な用途では有用です。通常はTSVを使う必要はありません。"
32
33 msgid "JSON and MessagePack"
34 msgstr "JSONとMessagePack"
35
36 msgid "This section describes the structure of command result on JSON and MessagePack format. JSON is used to show structure because MessagePack is binary format. Binary format isn't proper for documenataion."
37 msgstr "このセクションではJSONとMessagePack形式を使った時のコマンド実行結果の構造を説明します。MessagePackはバイナリー形式なのでここでは構造を示すためにJSONを使います。バイナリー形式はドキュメントには向いていません。"
38
39 msgid "JSON and MessagePack uses the following structure::"
40 msgstr "JSON形式、MessagePack形式のときは以下のような構造になります::"
41
42 msgid "For example::"
43 msgstr "実行例::"
44
45 msgid "In the example, the following part is ``HEADER``::"
46 msgstr "この例では、以下の部分が ``HEADER`` に相当します::"
47
48 msgid "The following part is ``BODY``::"
49 msgstr "``BODY`` に相当する部分は以下です::"
50
51 msgid "``HEADER``"
52 msgstr ""
53
54 msgid "``HEADER`` is an array. The content of ``HEADER`` has some patterns."
55 msgstr "``HEADER`` は配列です。 ``HEADER`` の内容にはいくつかのパターンがあります。"
56
57 msgid "Success case"
58 msgstr "成功した場合"
59
60 msgid "``HEADER`` has three elements on success::"
61 msgstr "コマンドが成功した場合は ``HEADER`` には3つの要素があります::"
62
63 msgid "The first element is always ``0``."
64 msgstr "最初の値は常に ``0`` です。"
65
66 msgid "``UNIX_TIME_WHEN_COMMAND_IS_STARTED`` is the number of seconds since 1970-01-01 00:00:00 UTC when the command is started processing. ``ELAPSED_TIME`` is the elapsed time for processing the command in seconds. Both ``UNIX_TIME_WHEN_COMMAND_IS_STARTED`` and ``ELAPSED_TIME`` are float value. The precision of them are nanosecond."
67 msgstr "``UNIX_TIME_WHEN_COMMAND_IS_STARTED`` はコマンドの実行が始まったときの時刻です。時刻は1970-01-01 00:00:00から経過した秒数で表現されています。 ``ELAPSED_TIME`` はコマンドの実行にかかった時間です。単位は秒です。 ``UNIX_TIME_WHEN_COMMAND_IS_STARTED`` も ``ELAPSED_TIME`` も浮動小数点数です。小数部分はナノ秒を表します。"
68
69 msgid "Error case"
70 msgstr "エラーの場合"
71
72 msgid "``HEADER`` has four or five elements on error::"
73 msgstr "エラーの場合、 ``HEADER`` には4個または5個の要素があります::"
74
75 msgid "``ERROR_LOCATION`` may not be included in ``HEADER`` but other four elements are always included."
76 msgstr "``ERROR_LOCATION`` は ``HEADER`` には含まれないかもしれませんが、他の4個の要素は常に含まれます。"
77
78 msgid "``RETURN_CODE`` is non 0 value. See :doc:`return_code` about available return codes."
79 msgstr "``RETURN_CODE`` は0ではない値です。リターンコードの詳細は :doc:`return_code` を見てください。"
80
81 msgid "``UNIX_TIME_WHEN_COMMAND_IS_STARTED`` and ``ELAPSED_TIME`` are the same as success case."
82 msgstr "``UNIX_TIME_WHEN_COMMAND_IS_STARTED`` と ``ELAPSED_TIME`` は成功した時と同じです。"
83
84 msgid "``ERROR_MESSAGE`` is an error message in string."
85 msgstr "``ERROR_MESSAGE`` はエラーメッセージです。文字列です。"
86
87 msgid "``ERROR_LOCATION`` is optional. If error location is collected, ``ERROR_LOCATION`` is included. ``ERROR_LOCATION`` is an array. ``ERROR_LOCATION`` has one or two elements::"
88 msgstr ""
89
90 msgid "``LOCATION_IN_GROONGA`` is the source location that error is occurred in groonga. It is useful for groonga developers but not useful for users. ``LOCATION_IN_GROONGA`` is an array. ``LOCATION_IN_GROONGA`` has three elements::"
91 msgstr ""
92
93 msgid "``FUNCTION_NAME`` is the name of function that error is occurred."
94 msgstr ""
95
96 msgid "``SOURCE_FILE_NAME`` is the name of groonga's source file that error is occurred."
97 msgstr ""
98
99 msgid "``LINE_NUMBER`` is the line number of ``SOURCE_FILE_NAME`` that error is occurred."
100 msgstr ""
101
102 msgid "``LOCATION_IN_INPUT`` is optional. ``LOCATION_IN_INPUT`` is included when the location that error is occurred in input file is collected. Input file can be specified by ``--file`` command line option for ``groonga`` command. ``LOCATION_IN_INPUT`` is an array. ``LOCATION_IN_INPUT`` has three elements::"
103 msgstr ""
104
105 msgid "``INPUT_FILE_NAME`` is the input file name that error is occurred."
106 msgstr ""
107
108 msgid "``LINE_NUMBER`` is the line number of ``INPUT_FILE_NAME`` that error is occurred."
109 msgstr ""
110
111 msgid "``LINE_CONTENT`` is the content at ``LINE_NUMBER`` in ``INPUT_FILE_NAME``."
112 msgstr ""
113
114 msgid "``BODY``"
115 msgstr ""
116
117 msgid "``BODY`` content depends on the executed command. It may be omitted."
118 msgstr ""
119
120 msgid "``BODY`` may be an error message on error case."
121 msgstr ""
122
123 msgid "XML"
124 msgstr ""
125
126 msgid "TODO"
127 msgstr ""
128
129 msgid "TSV"
130 msgstr ""
131
132 msgid "See also"
133 msgstr "参考"
134
135 msgid ":doc:`return_code` describes about return code."
136 msgstr ":doc:`return_code` はリターンコードについて説明しています。"