Debian Codegraph @

fr-FR/92_short-remedial-course.po

raw
1 # Raphael Hertzog <[email protected]>, 2015.
2 # Raphaël Hertzog <[email protected]>, 2015.
3 msgid ""
4 msgstr ""
5 "Project-Id-Version: 0\n"
6 "POT-Creation-Date: 2022-07-30 18:23+0200\n"
7 "PO-Revision-Date: 2021-02-06 00:22+0000\n"
8 "Last-Translator: Gilles B <[email protected]>\n"
9 "Language-Team: French <https://hosted.weblate.org/projects/debian-handbook/92_short-remedial-course/fr/>\n"
10 "Language: fr-FR\n"
11 "MIME-Version: 1.0\n"
12 "Content-Type: application/x-publican; charset=UTF-8\n"
13 "Content-Transfer-Encoding: 8bit\n"
14 "Plural-Forms: nplurals=2; plural=n > 1;\n"
15 "X-Generator: Weblate 4.5-dev\n"
16
17 msgid "BIOS"
18 msgstr "BIOS"
19
20 msgid "Kernel"
21 msgstr "Noyau"
22
23 msgid "Unix"
24 msgstr "Unix"
25
26 msgid "Process"
27 msgstr "Processus"
28
29 msgid "Hierarchy"
30 msgstr "Arborescence"
31
32 msgid "Basic Commands"
33 msgstr "Commandes de base"
34
35 msgid "Short Remedial Course"
36 msgstr "Petit cours de rattrapage"
37
38 msgid "Even though this book primarily targets administrators and “power-users”, we wouldn't like to exclude motivated beginners. This appendix will therefore be a crash-course describing the fundamental concepts involved in handling a Unix computer."
39 msgstr "Bien que cet ouvrage s'adresse principalement aux administrateurs ou utilisateurs avancés, nous ne souhaitons pas exclure les novices désireux de se former. Nous rappelons donc dans cette partie quelques concepts informatiques fondamentaux que l'on côtoie en exploitant un ordinateur sous Unix."
40
41 msgid "Shell and Basic Commands"
42 msgstr "Interpréteur de commandes et commandes de base"
43
44 msgid "In the Unix world, every administrator has to use the command line sooner or later; for example, when the system fails to start properly and only provides a command-line rescue mode. Being able to handle such an interface, therefore, is a basic survival skill for these circumstances."
45 msgstr "Dans le monde Unix, l'administrateur est inévitablement confronté à la ligne de commande, ne serait-ce que dans les cas où le système ne démarre plus correctement et propose uniquement ce moyen comme accès de secours. Il est donc important de savoir se débrouiller un minimum dans un interpréteur de commandes."
46
47 msgid "<emphasis>QUICK LOOK</emphasis> Starting the command interpreter"
48 msgstr "<emphasis>DÉCOUVERTE</emphasis> Démarrer un interpréteur de commmandes"
49
50 #, fuzzy
51 #| msgid "A command-line environment can be run from the graphical desktop, by an application known as a “terminal”. In GNOME, you can start it from the “Activities” overview (that you get when you move the mouse in the top-left corner of the screen) by typing the first letters of the application name. In Plasma, you will find it in the <menuchoice><guimenu>K</guimenu> <guisubmenu>Applications</guisubmenu> <guisubmenu>System</guisubmenu></menuchoice> menu."
52 msgid "A command-line environment can be run from the graphical desktop, by an application known as a “terminal”. In GNOME, you can start it from the “Activities” overview (that you get when you move the mouse in the top-left corner of the screen) by typing the first letters of the application name. In Plasma (and many other desktop variants), you will find it in the applications menu <menuchoice><guisubmenu>Applications</guisubmenu> <guisubmenu>System</guisubmenu></menuchoice> menu."
53 msgstr "Pour obtenir un interpréteur de commandes interactif dans un bureau graphique, il convient de lancer un « Terminal ». On peut le lancer à partir de la vue d'ensemble « Activités » (à laquelle on accède en déplaçant la souris dans le coin supérieur gauche de l'écran) en tapant les premières lettres de l'application. Pour Plasma, on le trouve dans <menuchoice><guimenu>K</guimenu> <guisubmenu>Applications</guisubmenu> <guisubmenu>Système</guisubmenu></menuchoice>."
54
55 msgid "This section only gives a quick peek at the commands. They all have many options not described here, so please refer to the abundant documentation in their respective manual pages."
56 msgstr "Les commandes présentées dans cette section le sont de manière assez rapide. Il ne faut pas hésiter à consulter les pages de manuels correspondantes pour découvrir les nombreuses options disponibles."
57
58 msgid "Browsing the Directory Tree and Managing Files"
59 msgstr "Déplacement dans l'arborescence et gestion des fichiers"
60
61 #, fuzzy
62 #| msgid "<primary><command>mkfs</command></primary>"
63 msgid "<primary><command>pwd</command></primary>"
64 msgstr "<primary><command>mkfs</command></primary>"
65
66 #, fuzzy
67 #| msgid "<primary><command>mkfs</command></primary>"
68 msgid "<primary><command>cd</command></primary>"
69 msgstr "<primary><command>mkfs</command></primary>"
70
71 #, fuzzy
72 #| msgid "<primary><filename>/bin</filename></primary>"
73 msgid "<primary><literal>.</literal></primary>"
74 msgstr "<primary><filename>/bin</filename></primary>"
75
76 #, fuzzy
77 #| msgid "<primary><filename>/bin</filename></primary>"
78 msgid "<primary><literal>..</literal></primary>"
79 msgstr "<primary><filename>/bin</filename></primary>"
80
81 msgid "Once a session is open, the <command>pwd</command> command (which stands for <emphasis>print working directory</emphasis>) displays the current location in the filesystem. The current directory is changed with the <command>cd <replaceable>directory</replaceable></command> command (<command>cd</command> is for <emphasis>change directory</emphasis>). The parent directory is always called <literal>..</literal> (two dots), whereas the current directory is also known as <literal>.</literal> (one dot). The <command>ls</command> command allows <emphasis>listing</emphasis> the contents of a directory. If no parameters are given, it operates on the current directory."
82 msgstr "Après connexion, la commande <command>pwd</command> (<foreignphrase>print working directory</foreignphrase>, afficher le répertoire de travail) indique l'emplacement courant. La commande <command>cd <replaceable>répertoire</replaceable></command> (<foreignphrase>change directory</foreignphrase>, changer de répertoire) sert à naviguer dans l'arborescence des fichiers. Le répertoire parent est toujours nommé <literal>..</literal> tandis que <literal>.</literal> est un synonyme pour le répertoire courant. La commande <command>ls</command> affiche le contenu d'un répertoire ; en l'absence de paramètres, elle travaille sur le répertoire courant."
83
84 #, fuzzy
85 #| msgid ""
86 #| "\n"
87 #| "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
88 #| "<computeroutput>/home/rhertzog\n"
89 #| "$ </computeroutput><userinput>cd Desktop</userinput>\n"
90 #| "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
91 #| "<computeroutput>/home/rhertzog/Desktop\n"
92 #| "$ </computeroutput><userinput>cd .</userinput>\n"
93 #| "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
94 #| "<computeroutput>/home/rhertzog/Desktop\n"
95 #| "$ </computeroutput><userinput>cd ..</userinput>\n"
96 #| "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
97 #| "<computeroutput>/home/rhertzog\n"
98 #| "$ </computeroutput><userinput>ls</userinput>\n"
99 #| "<computeroutput>Desktop Downloads Pictures Templates\n"
100 #| "Documents Music Public Videos</computeroutput>\n"
101 #| " "
102 msgid ""
103 "\n"
104 "<computeroutput>$ </computeroutput><userinput>pwd\n"
105 "</userinput><computeroutput>/home/rhertzog\n"
106 "$ </computeroutput><userinput>cd Desktop\n"
107 "</userinput><computeroutput>$ </computeroutput><userinput>pwd\n"
108 "</userinput><computeroutput>/home/rhertzog/Desktop\n"
109 "$ </computeroutput><userinput>cd .\n"
110 "</userinput><computeroutput>$ </computeroutput><userinput>pwd\n"
111 "</userinput><computeroutput>/home/rhertzog/Desktop\n"
112 "$ </computeroutput><userinput>cd ..</userinput>\n"
113 "<computeroutput>$ </computeroutput><userinput>pwd\n"
114 "</userinput><computeroutput>/home/rhertzog\n"
115 "$ </computeroutput><userinput>ls\n"
116 "</userinput><computeroutput>Desktop Downloads Pictures Templates\n"
117 "Documents Music Public Videos\n"
118 "</computeroutput>"
119 msgstr ""
120 "\n"
121 "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
122 "<computeroutput>/home/rhertzog\n"
123 "$ </computeroutput><userinput>cd Bureau</userinput>\n"
124 "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
125 "<computeroutput>/home/rhertzog/Bureau\n"
126 "$ </computeroutput><userinput>cd .</userinput>\n"
127 "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
128 "<computeroutput>/home/rhertzog/Bureau\n"
129 "$ </computeroutput><userinput>cd ..</userinput>\n"
130 "<computeroutput>$ </computeroutput><userinput>pwd</userinput>\n"
131 "<computeroutput>/home/rhertzog\n"
132 "$ </computeroutput><userinput>ls</userinput>\n"
133 "<computeroutput>Bureau Images Musique Téléchargements\n"
134 "Documents Modèles Public Vidéos</computeroutput>\n"
135 " "
136
137 #, fuzzy
138 #| msgid "<primary><command>mkfs</command></primary>"
139 msgid "<primary><command>mkdir</command></primary>"
140 msgstr "<primary><command>mkfs</command></primary>"
141
142 #, fuzzy
143 #| msgid "<primary><command>mkfs</command></primary>"
144 msgid "<primary><command>rmdir</command></primary>"
145 msgstr "<primary><command>mkfs</command></primary>"
146
147 #, fuzzy
148 #| msgid "<primary><command>mkfs</command></primary>"
149 msgid "<primary><command>mv</command></primary>"
150 msgstr "<primary><command>mkfs</command></primary>"
151
152 #, fuzzy
153 #| msgid "<primary><command>mkfs</command></primary>"
154 msgid "<primary><command>rm</command></primary>"
155 msgstr "<primary><command>mkfs</command></primary>"
156
157 msgid "A new directory can be created with <command>mkdir <replaceable>directory</replaceable></command>, and an existing (empty) directory can be removed with <command>rmdir <replaceable>directory</replaceable></command>. The <command>mv</command> command allows <emphasis>moving</emphasis> and/or renaming files and directories; <emphasis>removing</emphasis> a file is achieved with <command>rm <replaceable>file</replaceable></command>."
158 msgstr "Créer un nouveau répertoire s'effectue avec <command>mkdir <replaceable>répertoire</replaceable></command>, alors que la commande <command>rmdir <replaceable>répertoire</replaceable></command> supprime un répertoire vide. La commande <command>mv</command> sert à renommer et/ou à déplacer les fichiers et les répertoires, tandis que <command>rm <replaceable>fichier</replaceable></command> supprime un fichier."
159
160 #, fuzzy
161 #| msgid ""
162 #| "\n"
163 #| "<computeroutput>$ </computeroutput><userinput>mkdir test</userinput>\n"
164 #| "<computeroutput>$ </computeroutput><userinput>ls</userinput>\n"
165 #| "<computeroutput>Desktop Downloads Pictures Templates Videos\n"
166 #| "Documents Music Public test\n"
167 #| "$ </computeroutput><userinput>mv test new</userinput>\n"
168 #| "<computeroutput>$ </computeroutput><userinput>ls</userinput>\n"
169 #| "<computeroutput>Desktop Downloads new Public Videos\n"
170 #| "Documents Music Pictures Templates\n"
171 #| "$ </computeroutput><userinput>rmdir new</userinput>\n"
172 #| "<computeroutput>$ </computeroutput><userinput>ls</userinput>\n"
173 #| "<computeroutput>Desktop Downloads Pictures Templates Videos\n"
174 #| "Documents Music Public</computeroutput>\n"
175 #| " "
176 msgid ""
177 "\n"
178 "<computeroutput>$ </computeroutput><userinput>mkdir test\n"
179 "</userinput><computeroutput>$ </computeroutput><userinput>ls\n"
180 "</userinput><computeroutput>Desktop Downloads Pictures Templates Videos\n"
181 "Documents Music Public test\n"
182 "$ </computeroutput><userinput>mv test new\n"
183 "</userinput><computeroutput>$ </computeroutput><userinput>ls\n"
184 "</userinput><computeroutput>Desktop Downloads new Public Videos\n"
185 "Documents Music Pictures Templates\n"
186 "$ </computeroutput><userinput>rmdir new\n"
187 "</userinput><computeroutput>$ </computeroutput><userinput>ls\n"
188 "</userinput><computeroutput>Desktop Downloads Pictures Templates Videos\n"
189 "Documents Music Public</computeroutput>\n"
190 " "
191 msgstr ""
192 "\n"
193 "<computeroutput>$ </computeroutput><userinput>mkdir test</userinput>\n"
194 "<computeroutput>$ </computeroutput><userinput>ls</userinput>\n"
195 "<computeroutput>Bureau Images Musique Téléchargements Vidéos\n"
196 "Documents Modèles Public test\n"
197 "$ </computeroutput><userinput>mv test nouveau</userinput>\n"
198 "<computeroutput>$ </computeroutput><userinput>ls</userinput>\n"
199 "<computeroutput>Bureau Images Musique Public Vidéos\n"
200 "Documents Modèles nouveau Téléchargements\n"
201 "$ </computeroutput><userinput>rmdir nouveau</userinput>\n"
202 "<computeroutput>$ </computeroutput><userinput>ls</userinput>\n"
203 "<computeroutput>Bureau Images Musique Téléchargements\n"
204 "Documents Modèles Public Vidéos</computeroutput>\n"
205 " "
206
207 msgid "Displaying and Modifying Text Files"
208 msgstr "Consultation et modification des fichiers texte"
209
210 #, fuzzy
211 #| msgid "<primary><command>init</command></primary>"
212 msgid "<primary><command>cat</command></primary>"
213 msgstr "<primary><command>init</command></primary>"
214
215 #, fuzzy
216 #| msgid "<primary><command>mkfs</command></primary>"
217 msgid "<primary><command>less</command></primary>"
218 msgstr "<primary><command>mkfs</command></primary>"
219
220 #, fuzzy
221 #| msgid "<primary><command>mkfs</command></primary>"
222 msgid "<primary><command>more</command></primary>"
223 msgstr "<primary><command>mkfs</command></primary>"
224
225 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>daemon</foreignphrase></primary>
226 #, fuzzy
227 #| msgid "<primary>daemon</primary>"
228 msgid "<primary>pager</primary>"
229 msgstr "<primary>démon</primary>"
230
231 msgid "The <command>cat <replaceable>file</replaceable></command> command (intended to <emphasis>concatenate</emphasis> files to the standard output device) reads a file and displays its contents on the terminal. If the file is too big to fit on a screen, use a pager such as <command>less</command> (or <command>more</command>) to display it page by page."
232 msgstr "La commande <command>cat <replaceable>fichier</replaceable></command> (prévue pour concaténer des fichiers sur la sortie standard) lit un fichier et affiche son contenu dans le terminal. Si le fichier est trop gros, la commande <command>less</command> (ou <command>more</command>) permet de l'afficher page par page."
233
234 #, fuzzy
235 #| msgid "<primary><command>init</command></primary>"
236 msgid "<primary><command>editor</command></primary>"
237 msgstr "<primary><command>init</command></primary>"
238
239 #, fuzzy
240 #| msgid "<primary><command>init</command></primary>"
241 msgid "<primary><command>vi</command></primary>"
242 msgstr "<primary><command>init</command></primary>"
243
244 #, fuzzy
245 #| msgid "<primary><command>init</command></primary>"
246 msgid "<primary><command>nano</command></primary>"
247 msgstr "<primary><command>init</command></primary>"
248
249 #, fuzzy
250 #| msgid "<primary><command>mkfs</command></primary>"
251 msgid "<primary><command>echo</command></primary>"
252 msgstr "<primary><command>mkfs</command></primary>"
253
254 #, fuzzy
255 #| msgid "<primary>Firewire</primary>"
256 msgid "<primary>redirection</primary>"
257 msgstr "<primary>Firewire</primary>"
258
259 msgid "<primary><literal>&gt;</literal></primary><see>redirection</see>"
260 msgstr ""
261
262 msgid "The <command>editor</command> command starts a text editor (such as <command>vi</command> or <command>nano</command>) and allows creating, modifying and reading text files. The simplest files can sometimes be created directly from the command interpreter thanks to redirection: <command>echo \"<replaceable>text</replaceable>\" &gt;<replaceable>file</replaceable></command> creates a file named <replaceable>file</replaceable> with “<replaceable>text</replaceable>” as its contents. Adding a line at the end of this file is possible too, with a command such as <command>echo \"<replaceable>moretext</replaceable>\" &gt;&gt;<replaceable>file</replaceable></command>. Note the <literal>&gt;&gt;</literal> in this example."
263 msgstr "La commande <command>editor</command> lance un éditeur de texte (comme <command>vi</command> ou <command>nano</command>) et permet de créer/modifier/lire des fichiers texte. Pour les fichiers les plus simples, il est parfois possible de les créer directement depuis l'interpréteur de commandes grâce aux redirections. Ainsi, <command>echo \"<replaceable>texte</replaceable>\" &gt;<replaceable>fichier</replaceable></command> crée un fichier nommé <replaceable>fichier</replaceable> contenant « <replaceable>texte</replaceable> ». Pour ajouter une ligne à la fin de ce fichier, il est possible de faire <command>echo \"<replaceable>texte supplémentaire</replaceable>\" &gt;&gt;<replaceable>fichier</replaceable></command>. On notera l'emploi de <literal>&gt;&gt;</literal> dans cet exemple."
264
265 msgid "Searching for Files and within Files"
266 msgstr "Recherche de fichiers et dans les fichiers"
267
268 #, fuzzy
269 #| msgid "<primary><command>init</command></primary>"
270 msgid "<primary><command>find</command></primary>"
271 msgstr "<primary><command>init</command></primary>"
272
273 #, fuzzy
274 #| msgid "<primary><command>mkfs</command></primary>"
275 msgid "<primary><command>grep</command></primary>"
276 msgstr "<primary><command>mkfs</command></primary>"
277
278 msgid "The <command>find <replaceable>directory</replaceable> <replaceable>criteria</replaceable></command> command looks for files in the hierarchy under <replaceable>directory</replaceable> according to several criteria. The most commonly used criterion is <literal>-name <replaceable>name</replaceable></literal>: that allows looking for a file by its name."
279 msgstr "La commande <command>find <replaceable>répertoire</replaceable> <replaceable>critères</replaceable></command> recherche des fichiers dans l'arborescence sous <replaceable>répertoire</replaceable>. L'option <literal>-name <replaceable>nom</replaceable></literal> est le critère de recherche le plus courant et permet de retrouver un fichier par son nom."
280
281 msgid "The <command>grep <replaceable>expression</replaceable> <replaceable>files</replaceable></command> command searches the contents of the files and extracts the lines matching the regular expression (see sidebar <xref linkend=\"sidebar.regexp\" />). Adding the <literal>-r</literal> option enables a recursive search on all files contained in the directory passed as a parameter. This allows looking for a file when only a part of the contents are known."
282 msgstr "La commande <command>grep <replaceable>expression</replaceable> <replaceable>fichiers</replaceable></command> extrait du contenu des fichiers les lignes correspondant à l'expression rationnelle (voir encadré <xref linkend=\"sidebar.regexp\" />). L'option <literal>-r</literal> exécute une recherche récursive sur tous les fichiers contenus dans le répertoire indiqué en paramètre. Cela permet d'identifier facilement un fichier dont on connaît une partie du contenu."
283
284 msgid "Managing Processes"
285 msgstr "Gestion des processus"
286
287 #, fuzzy
288 #| msgid "<primary><command>mkfs</command></primary>"
289 msgid "<primary><command>ps</command></primary>"
290 msgstr "<primary><command>mkfs</command></primary>"
291
292 msgid "<primary>process</primary><secondary>ID</secondary><see><emphasis>pid</emphasis></see>"
293 msgstr ""
294
295 msgid "<primary><emphasis>pid</emphasis></primary>"
296 msgstr "<primary><foreignphrase>pid</foreignphrase></primary>"
297
298 #, fuzzy
299 #| msgid "<primary><command>mkfs</command></primary>"
300 msgid "<primary><command>kill</command></primary>"
301 msgstr "<primary><command>mkfs</command></primary>"
302
303 #, fuzzy
304 #| msgid "<primary>Serial ATA</primary>"
305 msgid "<primary>signal</primary>"
306 msgstr "<primary>Serial ATA</primary>"
307
308 #, fuzzy
309 #| msgid "<primary><filename>/bin</filename></primary>"
310 msgid "<primary><literal>TERM</literal></primary>"
311 msgstr "<primary><filename>/bin</filename></primary>"
312
313 #, fuzzy
314 #| msgid "<primary><filename>/bin</filename></primary>"
315 msgid "<primary><literal>KILL</literal></primary>"
316 msgstr "<primary><filename>/bin</filename></primary>"
317
318 msgid "The <command>ps aux</command> command lists the processes currently running and helps identifying them by showing their <emphasis>pid</emphasis> (process id). Once the <emphasis>pid</emphasis> of a process is known, the <command>kill -<replaceable>signal</replaceable> <replaceable>pid</replaceable></command> command allows sending it a signal (if the process belongs to the current user). Several signals exist; most commonly used are <literal>TERM</literal> (a request to terminate gracefully) and <literal>KILL</literal> (a forced kill)."
319 msgstr "La commande <command>ps aux</command> liste les processus en cours d'exécution et leur identifiant <foreignphrase>pid</foreignphrase> <foreignphrase>(process id)</foreignphrase>. Par la suite, la commande <command>kill -<replaceable>signal</replaceable> <replaceable>pid</replaceable></command> envoie un signal à un processus donné (à condition qu'il appartienne au même utilisateur) ; le signal <literal>TERM</literal> demande au programme de se terminer alors que <literal>KILL</literal> le tue brutalement."
320
321 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>daemon</foreignphrase></primary>
322 #, fuzzy
323 #| msgid "<primary>daemon</primary>"
324 msgid "<primary>background task</primary>"
325 msgstr "<primary>démon</primary>"
326
327 #, fuzzy
328 #| msgid "<primary><command>mkfs</command></primary>"
329 msgid "<primary><command>jobs</command></primary>"
330 msgstr "<primary><command>mkfs</command></primary>"
331
332 #, fuzzy
333 #| msgid "<primary><command>mkfs</command></primary>"
334 msgid "<primary><command>fg</command></primary>"
335 msgstr "<primary><command>mkfs</command></primary>"
336
337 #, fuzzy
338 #| msgid "<primary><command>mkfs</command></primary>"
339 msgid "<primary><command>bg</command></primary>"
340 msgstr "<primary><command>mkfs</command></primary>"
341
342 msgid "The command interpreter can also run programs in the background if the command is followed by a “&amp;”. By using the ampersand, the user resumes control of the shell immediately even though the command is still running (hidden from the user; as a background process). The <command>jobs</command> command lists the processes running in the background; running <command>fg %<replaceable>job-number</replaceable></command> (for <emphasis>foreground</emphasis>) restores a job to the foreground. When a command is running in the foreground (either because it was started normally, or brought back to the foreground with <command>fg</command>), the <keycombo action=\"simul\"><keycap>Control</keycap><keycap>Z</keycap></keycombo> key combination pauses the process and resumes control of the command-line. The process can then be restarted in the background with <command>bg %<replaceable>job-number</replaceable></command> (for <foreignphrase>background</foreignphrase>)."
343 msgstr "L'interpréteur de commandes permet de lancer des programmes en tâche de fond : il suffit pour cela d'ajouter « &amp;» à la fin de la commande. Dans ce cas, l'utilisateur retrouve le contrôle immédiatement, bien que la commande lancée ne soit pas encore terminée. La commande <command>jobs</command> indique les processus exécutés en arrière-plan. La commande <command>fg %<replaceable>numéro-de-job</replaceable></command> (<foreignphrase>foreground</foreignphrase>, avant-plan) replace le processus à l'avant-plan. Dans cette situation, la combinaison de touches <keycombo action=\"simul\"><keycap>Control</keycap><keycap>Z</keycap></keycombo> permet de stopper l'exécution du processus et de reprendre le contrôle de la ligne de commande. Pour réactiver en arrière-plan le processus stoppé, il faut faire <command>bg %<replaceable>numéro-de-job</replaceable></command> (pour <foreignphrase>background</foreignphrase>, arrière-plan)."
344
345 msgid "System Information: Memory, Disk Space, Identity"
346 msgstr "Informations système : mémoire, espace disque, identité"
347
348 #, fuzzy
349 #| msgid "<primary><command>mkfs</command></primary>"
350 msgid "<primary><command>free</command></primary>"
351 msgstr "<primary><command>mkfs</command></primary>"
352
353 #, fuzzy
354 #| msgid "<primary><command>mkfs</command></primary>"
355 msgid "<primary><command>df</command></primary>"
356 msgstr "<primary><command>mkfs</command></primary>"
357
358 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>daemon</foreignphrase></primary>
359 #, fuzzy
360 #| msgid "<primary>daemon</primary>"
361 msgid "<primary>human readable</primary>"
362 msgstr "<primary>démon</primary>"
363
364 msgid "The <command>free</command> command displays information on memory; <command>df</command> (<emphasis>disk free</emphasis>) reports on the available disk space on each of the disks mounted in the filesystem. Its <literal>-h</literal> option (for <emphasis>human readable</emphasis>) converts the sizes into a more legible unit (usually mebibytes or gibibytes). In a similar fashion, the <command>free</command> command supports the <literal>-m</literal> and <literal>-g</literal> options, and displays its data either in mebibytes or in gibibytes, respectively."
365 msgstr "La commande <command>free</command> affiche des informations sur l'usage de la mémoire vive, tandis que <command>df</command> <foreignphrase>(disk free)</foreignphrase> rapporte l'espace disponible sur les différents disques accessibles dans l'arborescence. On emploie fréquemment l'option <literal>-h</literal> de <command>df</command> (pour <foreignphrase>human readable</foreignphrase>) afin qu'il affiche les tailles avec une unité plus adaptée (généralement mégaoctets ou gigaoctets). De même, la commande <command>free</command> dispose de <literal>-m</literal> ou <literal>-g</literal> pour afficher les informations soit en mégaoctets soit en gigaoctets."
366
367 #, fuzzy
368 #| msgid ""
369 #| "\n"
370 #| "<computeroutput>$ </computeroutput><userinput>free</userinput>\n"
371 #| "<computeroutput> total used free shared buffers cached\n"
372 #| "Mem: 1028420 1009624 18796 0 47404 391804\n"
373 #| "-/+ buffers/cache: 570416 458004\n"
374 #| "Swap: 2771172 404588 2366584\n"
375 #| "$ </computeroutput><userinput>df</userinput>\n"
376 #| "<computeroutput>Filesystem 1K-blocks Used Available Use% Mounted on\n"
377 #| "/dev/sda2 9614084 4737916 4387796 52% /\n"
378 #| "tmpfs 514208 0 514208 0% /lib/init/rw\n"
379 #| "udev 10240 100 10140 1% /dev\n"
380 #| "tmpfs 514208 269136 245072 53% /dev/shm\n"
381 #| "/dev/sda5 44552904 36315896 7784380 83% /home\n"
382 #| "</computeroutput>"
383 msgid ""
384 "\n"
385 "<computeroutput>$ </computeroutput><userinput>free</userinput>\n"
386 "<computeroutput> total used free shared buff/cache available\n"
387 "Mem: 16279260 5910248 523432 871036 9845580 9128964\n"
388 "Swap: 16601084 240640 16360444\n"
389 "$ </computeroutput><userinput>df</userinput><computeroutput>\n"
390 "Filesystem 1K-blocks Used Available Use% Mounted on\n"
391 "udev 8108516 0 8108516 0% /dev\n"
392 "tmpfs 1627928 161800 1466128 10% /run\n"
393 "/dev/mapper/vg_main-root 466644576 451332520 12919912 98% /\n"
394 "tmpfs 8139628 146796 7992832 2% /dev/shm\n"
395 "tmpfs 5120 4 5116 1% /run/lock\n"
396 "tmpfs 8139628 0 8139628 0% /sys/fs/cgroup\n"
397 "/dev/sda1 523248 1676 521572 1% /boot/efi\n"
398 "tmpfs 1627924 88 1627836 1% /run/user/1000\n"
399 "</computeroutput>"
400 msgstr ""
401 "\n"
402 "<computeroutput>$ </computeroutput><userinput>free</userinput>\n"
403 "<computeroutput> total used free shared buffers cached\n"
404 "Mem: 1028420 1009624 18796 0 47404 391804\n"
405 "-/+ buffers/cache: 570416 458004\n"
406 "Swap: 2771172 404588 2366584\n"
407 "$ </computeroutput><userinput>df</userinput>\n"
408 "<computeroutput>Sys. de fich. 1K-blocs Occupé Disponible Capacité Monté sur\n"
409 "/dev/hda6 9614084 4737916 4387796 52% /\n"
410 "tmpfs 514208 0 514208 0% /lib/init/rw\n"
411 "udev 10240 100 10140 1% /dev\n"
412 "tmpfs 514208 269136 245072 53% /dev/shm\n"
413 "/dev/hda7 44552904 36315896 7784380 83% /home\n"
414 "</computeroutput>"
415
416 #, fuzzy
417 #| msgid "<primary><command>init</command></primary>"
418 msgid "<primary><command>id</command></primary>"
419 msgstr "<primary><command>init</command></primary>"
420
421 msgid "The <command>id</command> command displays the identity of the user running the session, along with the list of groups they belong to. Since access to some files or devices may be limited to group members, checking available group membership may be useful."
422 msgstr "La commande <command>id</command> affiche l'identité de l'utilisateur connecté et indique la liste des groupes dont il est membre. Il est parfois important de pouvoir vérifier si l'on est membre d'un groupe donné ; cela peut conditionner l'accès à certains fichiers ou périphériques."
423
424 msgid ""
425 "\n"
426 "<computeroutput>$ </computeroutput><userinput>id</userinput>\n"
427 "<computeroutput>uid=1000(rhertzog) gid=1000(rhertzog) groups=1000(rhertzog),24(cdrom),25(floppy),27(sudo),29(audio),30(dip),44(video),46(plugdev),108(netdev),109(bluetooth),115(scanner)</computeroutput>\n"
428 " "
429 msgstr ""
430 "\n"
431 "<computeroutput>$ </computeroutput><userinput>id</userinput>\n"
432 "<computeroutput>uid=1000(rhertzog) gid=1000(rhertzog) groupes=1000(rhertzog),24(cdrom),25(floppy),27(sudo),29(audio),30(dip),44(video),46(plugdev),108(netdev),109(bluetooth),115(scanner)</computeroutput>\n"
433 " "
434
435 msgid "Organization of the Filesystem Hierarchy"
436 msgstr "Organisation de l'arborescence des fichiers"
437
438 msgid "<primary>Filesystem Hierarchy</primary>"
439 msgstr "<primary>arborescence des fichiers</primary>"
440
441 msgid "The Root Directory"
442 msgstr "La racine"
443
444 msgid "<primary><filename>/bin</filename></primary>"
445 msgstr "<primary><filename>/bin</filename></primary>"
446
447 msgid "<primary><filename>/boot</filename></primary>"
448 msgstr "<primary><filename>/boot</filename></primary>"
449
450 msgid "<primary><filename>/dev</filename></primary>"
451 msgstr "<primary><filename>/dev</filename></primary>"
452
453 msgid "<primary><filename>/etc</filename></primary>"
454 msgstr "<primary><filename>/etc</filename></primary>"
455
456 msgid "<primary><filename>/home</filename></primary>"
457 msgstr "<primary><filename>/home</filename></primary>"
458
459 msgid "<primary><filename>/lib</filename></primary>"
460 msgstr "<primary><filename>/lib</filename></primary>"
461
462 msgid "<primary><filename>/media</filename></primary>"
463 msgstr "<primary><filename>/media</filename></primary>"
464
465 msgid "<primary><filename>/mnt</filename></primary>"
466 msgstr "<primary><filename>/mnt</filename></primary>"
467
468 msgid "<primary><filename>/opt</filename></primary>"
469 msgstr "<primary><filename>/opt</filename></primary>"
470
471 msgid "<primary><filename>/root</filename></primary>"
472 msgstr "<primary><filename>/root</filename></primary>"
473
474 msgid "<primary><filename>/run</filename></primary>"
475 msgstr "<primary><filename>/run</filename></primary>"
476
477 msgid "<primary><filename>/sbin</filename></primary>"
478 msgstr "<primary><filename>/sbin</filename></primary>"
479
480 msgid "<primary><filename>/srv</filename></primary>"
481 msgstr "<primary><filename>/srv</filename></primary>"
482
483 msgid "<primary><filename>/tmp</filename></primary>"
484 msgstr "<primary><filename>/tmp</filename></primary>"
485
486 msgid "<primary><filename>/usr</filename></primary>"
487 msgstr "<primary><filename>/usr</filename></primary>"
488
489 msgid "<primary><filename>/var</filename></primary>"
490 msgstr "<primary><filename>/var</filename></primary>"
491
492 msgid "<primary><filename>/proc</filename></primary>"
493 msgstr "<primary><filename>/proc</filename></primary>"
494
495 msgid "<primary><filename>/sys</filename></primary>"
496 msgstr "<primary><filename>/sys</filename></primary>"
497
498 msgid "A Debian system is organized along the <emphasis>Filesystem Hierarchy Standard</emphasis> (FHS). This standard defines the purpose of each directory. For instance, the top-level directories are described as follows:"
499 msgstr "L'arborescence d'un système Debian est organisée selon la norme FHS <foreignphrase>(Filesystem Hierarchy Standard)</foreignphrase>. Elle codifie de manière précise l'usage de chaque répertoire. Étudions la subdivision principale :"
500
501 msgid "<filename>/bin/</filename>: basic programs;"
502 msgstr "<filename>/bin/</filename> : programmes de base ;"
503
504 msgid "<filename>/boot/</filename>: Linux kernel and other files required for its early boot process;"
505 msgstr "<filename>/boot/</filename> : noyau Linux et autres fichiers nécessaires à son démarrage ;"
506
507 msgid "<filename>/dev/</filename>: device files;"
508 msgstr "<filename>/dev/</filename> : fichiers de périphériques ;"
509
510 msgid "<filename>/etc/</filename>: configuration files;"
511 msgstr "<filename>/etc/</filename> : fichiers de configuration ;"
512
513 msgid "<primary>account</primary><secondary>home directory</secondary>"
514 msgstr ""
515
516 msgid "<filename>/home/</filename>: user's personal files;"
517 msgstr "<filename>/home/</filename> : fichiers personnels des utilisateurs ;"
518
519 msgid "<filename>/lib/</filename>: basic libraries;"
520 msgstr "<filename>/lib/</filename> : bibliothèques de base ;"
521
522 msgid "<filename>/media/*</filename>: mount points for removable devices (CD-ROM, USB keys and so on);"
523 msgstr "<filename>/media/*</filename> : points de montage pour des périphériques amovibles (CD-Rom, clé USB, etc.) ;"
524
525 msgid "<filename>/mnt/</filename>: temporary mount point;"
526 msgstr "<filename>/mnt/</filename> : point de montage temporaire ;"
527
528 msgid "<filename>/opt/</filename>: extra applications provided by third parties;"
529 msgstr "<filename>/opt/</filename> : applications additionnelles fournies par des tierces parties ;"
530
531 #, fuzzy
532 #| msgid "<primary>Secure Boot</primary>"
533 msgid "<primary>root</primary>"
534 msgstr "<primary><foreignphrase>Secure Boot</foreignphrase> (démarrage sécurisé)</primary>"
535
536 msgid "<filename>/root/</filename>: administrator's (root's) personal files;"
537 msgstr "<filename>/root/</filename> : fichiers personnels de l'administrateur (utilisateur <literal>root</literal>) ;"
538
539 msgid "<filename>/run/</filename>: volatile runtime data that does not persist across reboots;"
540 msgstr "<filename>/run/</filename> : données d'exécution volatiles qui ne persistent pas entre les redémarrages ;"
541
542 msgid "<filename>/sbin/</filename>: system programs;"
543 msgstr "<filename>/sbin/</filename> : programmes système ;"
544
545 msgid "<filename>/srv/</filename>: data used by servers hosted on this system;"
546 msgstr "<filename>/srv/</filename> : données pour les services hébergés par ce système ;"
547
548 msgid "<filename>/tmp/</filename>: temporary files; this directory is often emptied at boot;"
549 msgstr "<filename>/tmp/</filename> : fichiers temporaires, ce répertoire étant souvent vidé au démarrage ;"
550
551 msgid "<filename>/usr/</filename>: applications; this directory is further subdivided into <filename>bin</filename>, <filename>sbin</filename>, <filename>lib</filename> (according to the same logic as in the root directory). Furthermore, <filename>/usr/share/</filename> contains architecture-independent data. <filename>/usr/local/</filename> is meant to be used by the administrator for installing applications manually without overwriting files handled by the packaging system (<command>dpkg</command>)."
552 msgstr "<filename>/usr/</filename> : applications supplémentaires ; ce répertoire se subdivise à nouveau en <filename>bin</filename>, <filename>sbin</filename>, <filename>lib</filename> selon la même logique. En outre, <filename>/usr/share/</filename> contient des données indépendantes de l'architecture. <filename>/usr/local/</filename> permet à l'administrateur d'installer manuellement certaines applications sans perturber le reste du système qui est géré par le système de paquetage (<command>dpkg</command>)."
553
554 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>daemon</foreignphrase></primary>
555 msgid "<primary>daemon</primary>"
556 msgstr "<primary>démon</primary>"
557
558 msgid "<filename>/var/</filename>: variable data handled by daemons. This includes log files, queues, spools, caches and so on."
559 msgstr "<filename>/var/</filename> : données variables des démons. Ceci inclut les fichiers de traces, les files d'attente, les caches, etc."
560
561 msgid "<primary>user</primary><secondary>user space</secondary>"
562 msgstr ""
563
564 msgid "<filename>/proc/</filename> and <filename>/sys/</filename> are specific to the Linux kernel (and not part of the FHS). They are used by the kernel for exporting data to user space (see <xref linkend=\"sect.userspace-presentation\" /> and <xref linkend=\"sect.user-space\" /> for explanations about this concept)."
565 msgstr "<filename>/proc/</filename> et <filename>/sys/</filename> ne sont pas standardisés et sont spécifiques au noyau Linux. Ils servent à exporter des données du noyau vers l'espace utilisateur (voir <xref linkend=\"sect.userspace-presentation\" /> et <xref linkend=\"sect.user-space\" /> pour des explications sur le sujet)."
566
567 #, fuzzy
568 #| msgid "<primary>filesystem</primary>"
569 msgid "<primary>merged <filename>/usr</filename></primary>"
570 msgstr "<primary>système de fichiers</primary>"
571
572 msgid "Note that many modern distributions, Debian included, are shipping <filename>/bin</filename>, <filename>/sbin</filename> and <filename>/lib</filename> as symlinks to the corresponding directories below <filename>/usr</filename> so that all programs and libraries are available in a single tree. It makes it easier to protect the integrity of the system files, and to share those system files among multiple containers, etc."
573 msgstr ""
574
575 msgid "The User's Home Directory"
576 msgstr "Le répertoire personnel de l'utilisateur"
577
578 #, fuzzy
579 #| msgid "<primary><filename>/bin</filename></primary>"
580 msgid "<primary><literal>~</literal></primary>"
581 msgstr "<primary><filename>/bin</filename></primary>"
582
583 msgid "The contents of a user's home directory is not standardized, but there are still a few noteworthy conventions. One is that a user's home directory is often referred to by a tilde (“~”). That is useful to know because command interpreters automatically replace a tilde with the correct directory (usually <filename>/home/<replaceable>user</replaceable>/</filename>)."
584 msgstr "Le contenu des répertoires utilisateurs n'est pas standardisé. Cependant, il y a tout de même quelques conventions à connaître. Avant tout, il faut savoir que l'on désigne fréquemment le répertoire personnel par un tilde (« ~ ») car les interpréteurs de commandes le remplaceront automatiquement par le bon répertoire <filename>/home/<replaceable>utilisateur</replaceable>/</filename>."
585
586 msgid "<primary>file</primary><secondary>hidden</secondary>"
587 msgstr ""
588
589 #, fuzzy
590 #| msgid "<primary>Firewire</primary>"
591 msgid "<primary>directory, hidden</primary>"
592 msgstr "<primary>Firewire</primary>"
593
594 msgid "Traditionally, application configuration files are often stored directly under the user's home directory, but their names usually start with a dot (for instance, the <command>mutt</command> email client stores its configuration in <filename>~/.muttrc</filename>). Note that filenames that start with a dot are hidden by default; and <command>ls</command> only lists them when the <literal>-a</literal> option is used, and graphical file managers need to be told to display hidden files."
595 msgstr "Traditionnellement, les fichiers de configuration des applications sont directement dans le répertoire de l'utilisateur, mais leurs noms débutent par un point (ex : <filename>~/.muttrc</filename> pour le lecteur de courrier <command>mutt</command>). Signalons que les fichiers débutant par un point sont cachés par défaut : il faut passer l'option <literal>-a</literal> à <command>ls</command> pour les voir et les gestionnaires de fichiers graphiques ont chacun leur propre mécanisme d'activation de l'affichage des fichiers cachés."
596
597 #, fuzzy
598 #| msgid "Some programs also use multiple configuration files organized in one directory (for instance, <filename>~/.ssh/</filename>). Some applications (such as the Iceweasel web browser) also use their directory to store a cache of downloaded data. This means that those directories can end up using a lot of disk space."
599 msgid "Some programs also use multiple configuration files organized in one directory (for instance, <filename>~/.ssh/</filename>). Some applications also use their directory to store a cache of downloaded data. This means that those directories can end up using a lot of disk space."
600 msgstr "Parfois, les logiciels emploient un répertoire complet (comme <filename>~/.ssh/</filename>) lorsqu'ils ont plusieurs fichiers de configuration à stocker. Signalons au passage que certaines applications (les navigateurs web comme Iceweasel par exemple) utilisent ces répertoires comme cache pour des données téléchargées. C'est pourquoi certains de ces répertoires peuvent être assez volumineux."
601
602 msgid "<primary>file</primary><secondary>dotfile</secondary>"
603 msgstr ""
604
605 #, fuzzy
606 #| msgid "These configuration files stored directly in a user's home directory, often collectively referred to as <emphasis>dotfiles</emphasis>, have long proliferated to the point that these directories can be quite cluttered with them. Fortunately, an effort led collectively under the FreeDesktop.org umbrella has resulted in the “XDG Base Directory Specification”, a convention that aims at cleaning up these files and directory. This specification states that configuration files should be stored under <filename>~/.config</filename>, cache files under <filename>~/.cache</filename>, and application data files under <filename>~/.local</filename> (or subdirectories thereof). This convention is slowly gaining traction, and several applications (especially graphical ones) have started following it."
607 msgid "These configuration files stored directly in a user's home directory, often collectively referred to as <emphasis>dotfiles</emphasis>, have long proliferated to the point that these directories can be quite cluttered with them. Fortunately, an effort led collectively under the FreeDesktop.org umbrella has resulted in the “XDG Base Directory Specification”, a convention that aims at cleaning up these files and directories. This specification states that configuration files should be stored under <filename>~/.config/</filename>, cache files under <filename>~/.cache/</filename>, and application data files under <filename>~/.local/</filename> (or subdirectories thereof). This convention is slowly gaining traction, and several applications (especially graphical ones) have started following it."
608 msgstr "Ces fichiers de configuration (en anglais, on parle de <foreignphrase>dotfiles</foreignphrase>) ont longtemps proliféré au point de surcharger le répertoire de l'utilisateur où ils sont directement stockés. Heureusement, un effort collectif, mené sous la bannière du projet FreeDesktop.org, a créé une nouvelle norme connue sous le nom de <foreignphrase>XDG Base Directory Specification</foreignphrase> pour standardiser l'organisation de ces fichiers et répertoires. Cette norme précise que les fichiers de configuration devraient être stockés sous <filename>~/.config</filename>, les fichiers de cache sous <filename>~/.cache</filename> et les données des applications sous <filename>~/.local</filename> (ou des sous-répertoires de ceux-ci). Cette norme commence à être reconnue et plusieurs applications (notamment graphiques) ont commencé à la respecter."
609
610 msgid "Graphical desktops usually display the contents of the <filename>~/Desktop/</filename> directory (or whatever the appropriate translation is for systems not configured in English) on the desktop (i.e. what is visible on screen once all applications are closed or iconized)."
611 msgstr "Les bureaux graphiques affichent généralement le contenu du répertoire <filename>~/Bureau/</filename> (ou <filename>~/Desktop/</filename> pour un système configuré en anglais) sur le bureau (c'est l'écran qui reste une fois toutes les applications fermées ou minimisées)."
612
613 msgid "Finally, the email system sometimes stores incoming emails into a <filename>~/Mail/</filename> directory."
614 msgstr "Enfin, il arrive que le système de messagerie dépose les courriers électroniques entrants dans <filename>~/Mail/</filename>."
615
616 msgid "Inner Workings of a Computer: the Different Layers Involved"
617 msgstr "Fonctionnement d'un ordinateur : les différentes couches en jeu"
618
619 msgid "A computer is often considered as something rather abstract, and the externally visible interface is much simpler than its internal complexity. Such complexity comes in part from the number of pieces involved. However, these pieces can be viewed in layers, where a layer only interacts with those immediately above or below."
620 msgstr "L'ordinateur se présente souvent comme quelque chose d'assez abstrait et sa partie visible est très simplifiée par rapport à sa complexité réelle. Cette complexité réside en partie dans le nombre d'éléments mis en jeu ; ces éléments peuvent cependant être regroupés en couches superposées, les éléments d'une couche n'interagissant qu'avec ceux de la couche immédiatement supérieure et de la couche immédiatement inférieure."
621
622 msgid "An end-user can get by without knowing these details… as long as everything works. When confronting a problem such as, “The internet doesn't work!”, the first thing to do is to identify in which layer the problem originates. Is the network card (hardware) working? Is it recognized by the computer? Does the Linux kernel see it? Are the network parameters properly configured? All these questions isolate an appropriate layer and focus on a potential source of the problem."
623 msgstr "En tant qu'utilisateur final, il n'est pas forcément nécessaire de connaître ces détails... du moins tant que tout fonctionne. Une fois confronté au problème « l'accès Internet ne fonctionne plus », il est indispensable de pouvoir retrouver dans quelle couche le problème apparaît : est-ce que la carte réseau (le matériel) fonctionne ? Est-ce qu'elle est reconnue par l'ordinateur ? Est-ce que Linux la reconnaît ? Est-ce que le réseau est bien configuré ? etc. Toutes ces questions vont permettre d'isoler la couche responsable et de traiter le problème au bon niveau."
624
625 msgid "The Deepest Layer: the Hardware"
626 msgstr "Au plus bas niveau : le matériel"
627
628 #, fuzzy
629 #| msgid "<primary>Firewire</primary>"
630 msgid "<primary>hardware</primary>"
631 msgstr "<primary>Firewire</primary>"
632
633 msgid "<primary>IDE</primary>"
634 msgstr "<primary>IDE</primary>"
635
636 msgid "<primary>SCSI</primary>"
637 msgstr "<primary>SCSI</primary>"
638
639 #, fuzzy
640 #| msgid "<primary>Serial ATA</primary>"
641 msgid "<primary>Serial ATA</primary><see>SATA</see>"
642 msgstr "<primary>Serial ATA</primary>"
643
644 #, fuzzy
645 #| msgid "<primary>ATA</primary>"
646 msgid "<primary>SATA</primary>"
647 msgstr "<primary>ATA</primary>"
648
649 #, fuzzy
650 #| msgid "<primary>Parallel ATA</primary>"
651 msgid "<primary>Parallel ATA</primary><see>PATA</see>"
652 msgstr "<primary>Parallel ATA</primary>"
653
654 #, fuzzy
655 #| msgid "<primary>ATA</primary>"
656 msgid "<primary>PATA</primary>"
657 msgstr "<primary>ATA</primary>"
658
659 msgid "<primary>ATA</primary>"
660 msgstr "<primary>ATA</primary>"
661
662 msgid "<primary>IEEE 1394</primary>"
663 msgstr "<primary>IEEE 1394</primary>"
664
665 msgid "<primary>Firewire</primary>"
666 msgstr "<primary>Firewire</primary>"
667
668 msgid "<primary>USB</primary>"
669 msgstr "<primary>USB</primary>"
670
671 msgid "Let us start with a basic reminder that a computer is, first and foremost, a set of hardware elements. There is generally a main board (known as the <emphasis>motherboard</emphasis>), with one (or more) processor(s), some RAM, device controllers, and extension slots for option boards (for other device controllers). Most noteworthy among these controllers are IDE (Parallel ATA), SCSI and Serial ATA, for connecting to storage devices such as hard disks. Other controllers include USB, which is able to host a great variety of devices (ranging from webcams to thermometers, from keyboards to home automation systems) and IEEE 1394 (Firewire). These controllers often allow connecting several devices so the complete subsystem handled by a controller is therefore usually known as a “bus”. Option boards include graphics cards (into which monitor screens will be plugged), sound cards, network interface cards, and so on. Some main boards are pre-built with these features, and don't need option boards."
672 msgstr "Pour commencer, rappelons qu'un ordinateur est avant tout un ensemble d'éléments matériels. On a généralement une carte mère, sur laquelle sont connectés un processeur (parfois plusieurs), de la mémoire vive, différents contrôleurs de périphériques intégrés et des emplacements d'extension pour des cartes filles, pour d'autres contrôleurs de périphériques. Parmi ces contrôleurs, on peut citer les normes IDE (Parallel ATA), SCSI et Serial ATA, qui servent à raccorder des périphériques de stockage comme des disques durs. On trouve également des contrôleurs USB, qui accueillent une grande variété de matériels (de la webcam au thermomètre, du clavier à la centrale domotique) et IEEE 1394 (Firewire). Ces contrôleurs permettent souvent de relier plusieurs périphériques à la fois ; c'est pourquoi on emploie fréquemment le terme de « bus » pour désigner le sous-système complet géré par le contrôleur. Les cartes filles incluent les cartes graphiques (sur lesquelles on pourra brancher un écran), les cartes son, les cartes réseau, etc. Certaines cartes mères intègrent une partie de ces fonctionnalités ; il n'est donc pas toujours nécessaire de recourir à des cartes d'extension."
673
674 msgid "<emphasis>IN PRACTICE</emphasis> Checking that the hardware works"
675 msgstr "<emphasis>EN PRATIQUE</emphasis> Vérifier que le matériel fonctionne"
676
677 msgid "Checking that a piece of hardware works can be tricky. On the other hand, proving that it doesn't work is sometimes quite simple."
678 msgstr "Il n'est pas toujours évident de vérifier que le matériel fonctionne. En revanche, il est parfois simple de constater qu'il ne marche plus."
679
680 msgid "A hard disk drive is made of spinning platters and moving magnetic heads. When a hard disk is powered up, the platter motor makes a characteristic whir. It also dissipates energy as heat. Consequently, a hard disk drive that stays cold and silent when powered up is broken."
681 msgstr "Un disque dur est constitué de plateaux rotatifs et de têtes de lecture qui se déplacent. Lorsque le disque dur est mis sous tension, il fait un bruit caractéristique dû à la rotation des plateaux. De plus, l'énergie dissipée entraîne un réchauffement du disque. Un disque alimenté qui reste froid et silencieux est vraisemblablement hors d'usage."
682
683 msgid "Network cards often include LEDs displaying the state of the link. If a cable is plugged in and leads to a working network hub or switch, at least one LED will be on. If no LED lights up, either the card itself, the network device, or the cable between them, is faulty. The next step is therefore testing each component individually."
684 msgstr "Les cartes réseau disposent souvent de LED qui indiquent l'état de la connexion. Si un câble est branché et s'il aboutit sur un concentrateur <foreignphrase>(hub)</foreignphrase> ou un commutateur <foreignphrase>(switch)</foreignphrase> sous tension, une LED au moins sera allumée. Si aucune LED n'est allumée, soit la carte est défectueuse, soit le périphérique connecté à l'autre bout du câble est défectueux, soit le câble est défectueux. Il ne reste plus qu'à tester individuellement les composants incriminés."
685
686 msgid "Some option boards — especially 3D video cards — include cooling devices, such as heat sinks and/or fans. If the fan does not spin even though the card is powered up, a plausible explanation is the card overheated. This also applies to the main processor(s) located on the main board."
687 msgstr "Certaines cartes électroniques filles — les cartes vidéo 3D notamment — disposent de mécanismes de refroidissement intégré, souvent des radiateurs et des ventilateurs. Si le ventilateur ne tourne pas alors que la carte est sous tension, il est probable que la carte ait surchauffé et soit abîmée. Il en va de même pour le (ou les) processeur(s) situé(s) sur la carte mère."
688
689 msgid "The Starter: the BIOS or UEFI"
690 msgstr "Le démarreur : le BIOS ou l'UEFI"
691
692 msgid "<primary>BIOS</primary>"
693 msgstr "<primary>BIOS</primary>"
694
695 msgid "<primary>UEFI</primary>"
696 msgstr "<primary>UEFI</primary>"
697
698 #, fuzzy
699 #| msgid "<primary>Master Boot Record (MBR)</primary>"
700 msgid "<primary>Master Boot Record</primary><see>MBR</see>"
701 msgstr "<primary>Secteur d'amorçage</primary>"
702
703 #, fuzzy
704 #| msgid "<primary>USB</primary>"
705 msgid "<primary>MBR</primary>"
706 msgstr "<primary>USB</primary>"
707
708 msgid "Hardware, on its own, is unable to perform useful tasks without a corresponding piece of software driving it. Controlling and interacting with the hardware is the purpose of the operating system and applications. These, in turn, require functional hardware to run."
709 msgstr "Le matériel seul n'est cependant pas autonome ; il est même totalement inutile sans qu'une partie logicielle permette d'en tirer parti. C'est le but du système d'exploitation et des applications — qui, de manière similaire, ne peuvent fonctionner sans un ordinateur pour les exécuter."
710
711 #, fuzzy
712 #| msgid "This symbiosis between hardware and software does not happen on its own. When the computer is first powered up, some initial setup is required. This role is assumed by the BIOS or UEFI, a piece of software embedded into the main board that runs automatically upon power-up. Its primary task is searching for software it can hand over control to. Usually, in the BIOS case, this involves looking for the first hard disk with a boot sector (also known as the <emphasis>master boot record</emphasis> or <acronym>MBR</acronym>), loading that boot sector, and running it. From then on, the BIOS is usually not involved (until the next boot). In the case of UEFI, the process involves scanning disks to find a dedicated EFI partition containing further EFI applications to execute."
713 msgid "This symbiosis between hardware and software does not happen on its own. When the computer is first powered up, some initial setup is required. This role is assumed by the BIOS or UEFI, a piece of software embedded into the main board that runs automatically upon power-up. Its primary task is searching for software it can hand over control to. Usually, as you may have learned in <xref linkend=\"sect.system-boot\" />, in the BIOS case, this involves looking for the first hard disk with a boot sector (also known as the <emphasis>master boot record</emphasis> or <acronym>MBR</acronym>), loading that boot sector, and running it. From then on, the BIOS is usually not involved (until the next boot). In the case of UEFI, the process involves scanning disks to find a dedicated EFI partition containing further EFI applications to execute."
714 msgstr "Il est donc nécessaire d'ajouter un élément de liaison, qui mette en relation le matériel et les logiciels, ne serait-ce qu'au démarrage de l'ordinateur. C'est le rôle principal du BIOS et de l'UEFI, qui sont des logiciels intégrés à la carte mère de l'ordinateur et exécutés automatiquement à l'allumage. Leur tâche primordiale consiste à déterminer à quel logiciel passer la main. Dans le cas du BIOS, il s'agit en général de trouver le premier disque dur contenant un secteur d'amorçage (souvent appelé <acronym>MBR</acronym> pour <foreignphrase>Master Boot Record</foreignphrase>), de charger ce secteur d'amorçage et de l'exécuter. À partir de ce moment, le BIOS n'est généralement plus utilisé (jusqu'au démarrage suivant). Pour l'UEFI, il s'agit de scanner les disques pour trouver la partition EFI dédiée contenant d'autres applications EFI à exécuter."
715
716 msgid "<emphasis>TOOL</emphasis> Setup, the BIOS/UEFI configuration tool"
717 msgstr "<emphasis>OUTIL</emphasis> Setup, l'outil de configuration du BIOS et de l'UEFI"
718
719 msgid "<primary><emphasis>Setup</emphasis></primary>"
720 msgstr "<primary><foreignphrase>Setup</foreignphrase></primary>"
721
722 #, fuzzy
723 #| msgid "The BIOS/UEFI also contains a piece of software called Setup, designed to allow configuring aspects of the computer. In particular, it allows choosing which boot device is preferred (for instance, the floppy disk or CD-ROM drive), setting the system clock, and so on. Starting Setup usually involves pressing a key very soon after the computer is powered on. This key is often <keycap>Del</keycap> or <keycap>Esc</keycap>, sometimes <keycap>F2</keycap> or <keycap>F10</keycap>. Most of the time, the choice is flashed on screen while booting."
724 msgid "The BIOS/UEFI also contains a piece of software called Setup, designed to allow configuring aspects of the computer. In particular, it allows choosing which boot device is preferred (for instance, you can select a USB key or a CD-ROM drive instead of the default harddisk), setting the system clock, and so on. Starting Setup usually involves pressing a key very soon after the computer is powered on. This key is often <keycap>Del</keycap> or <keycap>Esc</keycap>, sometimes <keycap>F2</keycap>, <keycap>F5</keycap>, <keycap>F8</keycap>, or <keycap>F10</keycap>. Most of the time, the choice is flashed on screen while booting. If not, you best check the manual of your mainboard or your computer."
725 msgstr "Le BIOS ou l'UEFI contient également un logiciel appelé Setup, qui sert à configurer certains aspects de l'ordinateur. On pourra notamment choisir le périphérique de démarrage à favoriser (par exemple, le lecteur de disquettes ou de CD-Rom), régler l'horloge interne, etc. Pour lancer cet outil, il faut généralement appuyer sur une touche très tôt après la mise sous tension de l'ordinateur. C'est souvent <keycap>Suppr</keycap> ou <keycap>Échap</keycap>, plus rarement <keycap>F2</keycap> ou <keycap>F10</keycap>, mais la plupart du temps elle est indiquée à l'écran."
726
727 msgid "The boot sector (or the EFI partition), in turn, contains another piece of software, called the bootloader, whose purpose is to find and run an operating system. Since this bootloader is not embedded in the main board but loaded from disk, it can be smarter than the BIOS, which explains why the BIOS does not load the operating system by itself. For instance, the bootloader (often GRUB on Linux systems) can list the available operating systems and ask the user to choose one. Usually, a time-out and default choice is provided. Sometimes the user can also choose to add parameters to pass to the kernel, and so on. Eventually, a kernel is found, loaded into memory, and executed."
728 msgstr "Le secteur d'amorçage (ou la partition EFI) contient à son tour un autre logiciel, le chargeur de démarrage, dont la tâche sera de trouver un système d'exploitation et de l'exécuter. Comme ce chargeur de démarrage n'est pas embarqué dans la carte mère mais chargé depuis un disque dur (ou autre), il dispose de plus de possibilités que le chargeur du BIOS (ce qui explique pourquoi le BIOS ne charge pas le système d'exploitation directement). Le chargeur de démarrage (souvent GRUB sur les systèmes Linux) peut ainsi proposer de choisir quel système démarrer si plusieurs sont présents, avec un choix par défaut faute de réponse dans un délai imparti, avec des paramètres divers éventuellement saisis par l'utilisateur, etc. Il finit donc par trouver un noyau à démarrer, le charge en mémoire et l'exécute."
729
730 msgid "<emphasis>NOTE</emphasis> UEFI, a modern replacement to the BIOS"
731 msgstr "<emphasis>NOTE</emphasis> UEFI, le remplaçant moderne du BIOS"
732
733 msgid "<primary>Basic Input/Output System</primary><see>BIOS</see>"
734 msgstr ""
735
736 msgid "<primary>Unified Extensible Firmware Interface</primary><see>UEFI</see>"
737 msgstr ""
738
739 msgid "<primary>Secure Boot</primary>"
740 msgstr "<primary><foreignphrase>Secure Boot</foreignphrase> (démarrage sécurisé)</primary>"
741
742 #, fuzzy
743 #| msgid "<primary>SCSI</primary>"
744 msgid "<primary>CSM</primary>"
745 msgstr "<primary>SCSI</primary>"
746
747 msgid "<primary>Compatibility Support Mode</primary><see>CSM</see>"
748 msgstr ""
749
750 msgid "BIOS (which stands for Basic Input/Output System) is a software that is included in the motherboard - the electronic board connecting all peripherals - and executed when the computer is booted, in order to load an operating system (via an adapted bootloader). It stays in the background to provide an interface between the hardware and the software (in our case, the Linux kernel)."
751 msgstr ""
752
753 #, fuzzy
754 #| msgid "This new system gets rid of some of the limitations of BIOS booting: with the usage of a dedicated partition, the bootloaders no longer need special tricks to fit in a tiny <emphasis>master boot record</emphasis> and then discover the kernel to boot. Even better, with a suitably built Linux kernel, UEFI can directly boot the kernel without any intermediary bootloader. UEFI is also the basic foundation used to deliver <emphasis>Secure Boot</emphasis>, a technology ensuring that you run only software validated by your operating system vendor."
755 msgid "In 2005/2006 its successor, the UEFI (Unified Extensible Firmware Interface) specification, has been published. This specification defines an interface that has the same purpose as the BIOS, but tries to provide more usability, extensibility, and flexibility, a graphical user interface, and true 64bit support. And it got rid of some of the limitations of BIOS booting: with the usage of a dedicated partition, the bootloaders no longer need special tricks to fit in a tiny <emphasis>master boot record</emphasis> and then discover the kernel to boot. Even better, with a suitably built Linux kernel, UEFI can directly boot the kernel without any intermediary bootloader. UEFI is also the basic foundation used to deliver <emphasis>Secure Boot</emphasis>, a technology ensuring that you run only software validated by your operating system vendor."
756 msgstr "Ce nouveau système n'a plus certaines limitations que le BIOS avait : avec l'utilisation d'une partition dédiée, le chargeur de démarrage n'a plus besoin de bricoler pour se loger dans un petit secteur d'amorçage, et ensuite trouver le noyau à démarrer. Mieux encore, avec un noyau Linux adapté, l'UEFI peut directement démarrer le noyau sans l'intermédiaire d'un chargeur de démarrage. L'UEFI est aussi un prérequis pour exploiter la technologie <foreignphrase>Secure Boot</foreignphrase> (<emphasis>démarrage sécurisé</emphasis>), qui n'exécutera que des logiciels préalablement validés par le fournisseur du système d'exploitation."
757
758 msgid "Nowadays, most new computers will boot in UEFI mode by default, but usually they also support BIOS booting alongside for backwards compatibility with operating systems that are not ready to exploit UEFI. This is called the <emphasis>Compatibility Support Mode/Module</emphasis> (CSM). But, several manufacturers have either announced to cease support for the legacy BIOS mode in their UEFI implementation, or they already did. This transition, however, has not been without discussion nor without criticism."
759 msgstr ""
760
761 msgid "The BIOS/UEFI is also in charge of detecting and initializing a number of devices. Obviously, this includes the IDE/SATA devices (usually hard disk(s) and CD/DVD-ROM drives), but also PCI devices. Detected devices are often listed on screen during the boot process. If this list goes by too fast, use the <keycap>Pause</keycap> key to freeze it for long enough to read. Installed PCI devices that don't appear are a bad omen. At worst, the device is faulty. At best, it is merely incompatible with the current version of the BIOS or main board. PCI specifications evolve, and old main boards are not guaranteed to handle newer PCI devices."
762 msgstr "Le BIOS (ou l'UEFI) est également responsable de l'initialisation et de la détection d'un certain nombre de périphériques. Il détecte bien entendu les périphériques IDE/SATA (disques durs et lecteurs de CD-Roms/DVD-Roms), mais souvent aussi les périphériques PCI. Les périphériques détectés sont généralement listés de manière furtive au démarrage (l'appui sur la touche <keycap>Pause</keycap> permet souvent de figer l'écran pour l'analyser plus longuement). Si un des périphériques PCI installés n'y apparaît pas, c'est mauvais signe. Au pire, le périphérique est défectueux, au mieux il fonctionne mais il est incompatible avec cette version du BIOS ou de la carte mère. Les spécifications PCI ont en effet évolué au fil du temps et il n'est pas impossible qu'une ancienne carte mère ne gère pas une carte PCI récente."
763
764 msgid "The Kernel"
765 msgstr "Le noyau"
766
767 #, fuzzy
768 #| msgid "<primary>kernel space</primary>"
769 msgid "<primary>kernel</primary>"
770 msgstr "<primary>espace noyau</primary>"
771
772 msgid "Both the BIOS/UEFI and the bootloader only run for a few seconds each; now we are getting to the first piece of software that runs for a longer time, the operating system kernel. This kernel assumes the role of a conductor in an orchestra, and ensures coordination between hardware and software. This role involves several tasks including: driving hardware, managing processes, users and permissions, the filesystem, and so on. The kernel provides a common base to all other programs on the system."
773 msgstr "Nous arrivons alors au premier logiciel qui va s'exécuter de manière durable (le BIOS/l'UEFI et le chargeur de démarrage ne fonctionnent que quelques secondes chacun) : le noyau du système d'exploitation. Celui-ci prend alors le rôle de chef d'orchestre, pour assurer la coordination entre le matériel et les logiciels. Ce rôle inclut différentes tâches, notamment le pilotage du matériel, la gestion des processus, des utilisateurs et des permissions, le système de fichiers, etc. Il fournit ainsi une base commune aux programmes du système."
774
775 msgid "The User Space"
776 msgstr "L'espace utilisateur"
777
778 msgid "Although everything that happens outside of the kernel can be lumped together under “user space”, we can still separate it into software layers. However, their interactions are more complex than before, and the classifications may not be as simple. An application commonly uses libraries, which in turn involve the kernel, but the communications can also involve other programs, or even many libraries calling each other."
779 msgstr "Bien que tout ce qui se passe au-dessus du noyau soit regroupé sous le vocable d'espace utilisateur, on peut encore différencier des couches logicielles ; mais leurs interactions étant plus complexes que précédemment, la différenciation n'est plus aussi simple. Un programme peut en effet faire appel à des bibliothèques qui font à leur tour appel au noyau, mais le flux des communications peut aussi mettre en jeu d'autres programmes, voire de multiples bibliothèques s'appelant l'une l'autre."
780
781 msgid "Some Tasks Handled by the Kernel"
782 msgstr "Quelques fonctions remplies par le noyau"
783
784 msgid "Driving the Hardware"
785 msgstr "Pilotage du matériel"
786
787 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>daemon</foreignphrase></primary>
788 #, fuzzy
789 #| msgid "<primary>daemon</primary>"
790 msgid "<primary>Video for Linux</primary><see>V4L</see>"
791 msgstr "<primary>démon</primary>"
792
793 #, fuzzy
794 #| msgid "<primary>IDE</primary>"
795 msgid "<primary>V4L</primary>"
796 msgstr "<primary>IDE</primary>"
797
798 msgid "The kernel is, first and foremost, tasked with controlling the hardware parts, detecting them, switching them on when the computer is powered on, and so on. It also makes them available to higher-level software with a simplified programming interface, so applications can take advantage of devices without having to worry about details such as which extension slot the option board is plugged into. The programming interface also provides an abstraction layer; this allows video-conferencing software, for example, to use a webcam independently of its make and model. The software can just use the <emphasis>Video for Linux</emphasis> (V4L) interface, and the kernel translates the function calls of this interface into the actual hardware commands needed by the specific webcam in use."
799 msgstr "Le noyau sert d'abord à contrôler les différents composants matériels, les recenser, les mettre en marche lors de l'initialisation de l'ordinateur, etc. Il les rend également disponibles pour les applications de plus haut niveau, avec une interface de programmation simplifiée : les logiciels peuvent ainsi utiliser les périphériques sans se préoccuper de détails de très bas niveau comme l'emplacement dans lequel est enfichée la carte fille. L'interface de programmation offre également une couche d'abstraction qui sert par exemple à un logiciel de visiophonie pour tirer parti d'une webcam de la même manière, quels que soient sa marque et son modèle ; ce logiciel utilise simplement l'interface de programmation V4L (<foreignphrase>Video for Linux</foreignphrase>, le quatre se prononçant comme <foreignphrase>for</foreignphrase> en anglais) et c'est le noyau qui traduira les appels de fonction de cette interface en commandes spécifiques au type de webcam réellement utilisé."
800
801 #, fuzzy
802 #| msgid "<primary><command>mkfs</command></primary>"
803 msgid "<primary><command>lspci</command></primary>"
804 msgstr "<primary><command>mkfs</command></primary>"
805
806 #, fuzzy
807 #| msgid "<primary><command>mkfs</command></primary>"
808 msgid "<primary><command>lsusb</command></primary>"
809 msgstr "<primary><command>mkfs</command></primary>"
810
811 #, fuzzy
812 #| msgid "<primary><command>mkfs</command></primary>"
813 msgid "<primary><command>lsdev</command></primary>"
814 msgstr "<primary><command>mkfs</command></primary>"
815
816 #, fuzzy
817 #| msgid "<primary><command>mkfs</command></primary>"
818 msgid "<primary><command>lspcmcia</command></primary>"
819 msgstr "<primary><command>mkfs</command></primary>"
820
821 #, fuzzy
822 #| msgid "<indexterm><primary><command>lspci</command></primary></indexterm> <indexterm><primary><command>lsusb</command></primary></indexterm> <indexterm><primary><command>lsdev</command></primary></indexterm> <indexterm><primary><command>lspcmcia</command></primary></indexterm> The kernel exports many details about detected hardware through the <filename>/proc/</filename> and <filename>/sys/</filename> virtual filesystems. Several tools summarize those details. Among them, <command>lspci</command> (in the <emphasis role=\"pkg\">pciutils</emphasis> package) lists PCI devices, <command>lsusb</command> (in the <emphasis role=\"pkg\">usbutils</emphasis> package) lists USB devices, and <command>lspcmcia</command> (in the <emphasis role=\"pkg\">pcmciautils</emphasis> package) lists PCMCIA cards. These tools are very useful for identifying the exact model of a device. This identification also allows more precise searches on the web, which in turn, lead to more relevant documents."
823 msgid "The kernel exports many details about detected hardware through the <filename>/proc/</filename> and <filename>/sys/</filename> virtual filesystems. Several tools summarize those details. Among them, <command>lspci</command> (in the <emphasis role=\"pkg\">pciutils</emphasis> package) lists PCI devices, <command>lsusb</command> (in the <emphasis role=\"pkg\">usbutils</emphasis> package) lists USB devices, and <command>lspcmcia</command> (in the <emphasis role=\"pkg\">pcmciautils</emphasis> package) lists PCMCIA cards. These tools are very useful for identifying the exact model of a device. This identification also allows more precise searches on the web, which in turn, lead to more relevant documents."
824 msgstr "<indexterm><primary><command>lspci</command></primary></indexterm> <indexterm><primary><command>lsusb</command></primary></indexterm> <indexterm><primary><command>lsdev</command></primary></indexterm> <indexterm><primary><command>lspcmia</command></primary></indexterm> Le noyau exporte de nombreuses informations sur le matériel qu'il a détecté par l'intermédiaire des systèmes de fichiers virtuels <filename>/proc/</filename> et <filename>/sys/</filename>. Plusieurs utilitaires synthétisent certaines de ces informations : citons <command>lspci</command> (du paquet <emphasis role=\"pkg\">pciutils</emphasis>) qui affiche la liste des périphériques PCI connectés, <command>lsusb</command> (du paquet <emphasis role=\"pkg\">usbutils</emphasis>) qui fait de même avec les périphériques USB et <command>lspcmcia</command> (du paquet <emphasis role=\"pkg\">pcmciautils</emphasis>) pour les cartes PCMCIA. Ces programmes sont très utiles quand il faut pouvoir identifier de manière certaine le modèle d'un périphérique. En outre, cette identification unique permet de mieux cibler les recherches sur Internet et de trouver plus facilement des documents pertinents."
825
826 msgid "Example of information provided by <command>lspci</command> and <command>lsusb</command>"
827 msgstr "Exemple d'informations fournies par <command>lspci</command> et <command>lsusb</command>"
828
829 msgid ""
830 "\n"
831 "<computeroutput>$ </computeroutput><userinput>lspci\n"
832 "</userinput><computeroutput>[...]\n"
833 "00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)\n"
834 "00:01.0 PCI bridge: Intel Corporation 6th-9th Gen Core Processor PCIe Controller (x16) (rev 05)\n"
835 "00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)\n"
836 "00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)\n"
837 "00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)\n"
838 "[...]\n"
839 "02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)\n"
840 "03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)\n"
841 "03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)\n"
842 "04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983\n"
843 "$ </computeroutput><userinput>lsusb\n"
844 "</userinput><computeroutput>Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub\n"
845 "Bus 001 Device 003: ID 0bda:5621 Realtek Semiconductor Corp. HD WebCam\n"
846 "Bus 001 Device 002: ID 04ca:3016 Lite-On Technology Corp. \n"
847 "Bus 001 Device 018: ID 145f:01bc Trust GXT 155 Gaming Mouse\n"
848 "Bus 001 Device 004: ID 04f3:0c03 Elan Microelectronics Corp. ELAN:Fingerprint\n"
849 "Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub\n"
850 "</computeroutput>"
851 msgstr ""
852
853 msgid "These programs have a <literal>-v</literal> option that lists much more detailed (but usually not necessary) information. Finally, the <command>lsdev</command> command (in the <emphasis role=\"pkg\">procinfo</emphasis> package) lists communication resources used by devices."
854 msgstr "Les options <literal>-v</literal> de ces programmes permettent d'obtenir des informations beaucoup plus détaillées qui ne seront généralement pas nécessaires. Enfin, la commande <command>lsdev</command> (du paquet <emphasis role=\"pkg\">procinfo</emphasis>) liste les différentes ressources de communication exploitées par les périphériques présents."
855
856 msgid "<primary>device</primary><secondary>files</secondary>"
857 msgstr ""
858
859 msgid "<primary>device</primary><secondary>block</secondary>"
860 msgstr ""
861
862 msgid "Applications often access devices by way of special files created within <filename>/dev/</filename> (see sidebar <xref linkend=\"sidebar.special-files\" />). These are special files that represent disk drives (for instance, <filename>/dev/hda</filename> and <filename>/dev/sdc</filename>), partitions (<filename>/dev/hda1</filename> or <filename>/dev/sdc3</filename>), mice (<filename>/dev/input/mouse0</filename>), keyboards (<filename>/dev/input/event0</filename>), soundcards (<filename>/dev/snd/*</filename>), serial ports (<filename>/dev/ttyS*</filename>), and so on."
863 msgstr "Bien souvent, les applications accèdent aux périphériques par le biais de fichiers spéciaux qui sont créés dans <filename>/dev/</filename> (voir encadré <xref linkend=\"sidebar.special-files\" />). Il existe des fichiers spéciaux qui représentent les disques (par exemple <filename>/dev/hda</filename> et <filename>/dev/sdc</filename>), les partitions (<filename>/dev/hda1</filename> ou <filename>/dev/sdc3</filename>), la souris (<filename>/dev/input/mouse0</filename>), le clavier (<filename>/dev/input/event0</filename>), la carte son (<filename>/dev/snd/*</filename>), les ports série (<filename>/dev/ttyS*</filename>), etc."
864
865 msgid "Filesystems"
866 msgstr "Systèmes de fichiers"
867
868 msgid "<primary>filesystem</primary>"
869 msgstr "<primary>système de fichiers</primary>"
870
871 #, fuzzy
872 #| msgid "<primary>system, filesystem</primary>"
873 msgid "<primary>system</primary><secondary>filesystem</secondary>"
874 msgstr "<primary>fichiers, système de</primary>"
875
876 msgid "Filesystems are one of the most prominent aspects of the kernel. Unix systems merge all the file stores into a single hierarchy, which allows users (and applications) to access data simply by knowing its location within that hierarchy."
877 msgstr "Un des aspects les plus visibles du noyau est celui des systèmes de fichiers. Les systèmes Unix intègrent en effet les différentes méthodes de stockage de fichiers dans une arborescence unique, ce qui permet aux utilisateurs (et aux applications) de stocker ou retrouver des données simplement grâce à leur emplacement dans cette arborescence."
878
879 msgid "The starting point of this hierarchical tree is called the root, <filename>/</filename>. This directory can contain named subdirectories. For instance, the <literal>home</literal> subdirectory of <filename>/</filename> is called <filename>/home/</filename>. This subdirectory can, in turn, contain other subdirectories, and so on. Each directory can also contain files, where the actual data will be stored. Thus, the <filename>/home/rmas/Desktop/hello.txt</filename> name refers to a file named <literal>hello.txt</literal> stored in the <literal>Desktop</literal> subdirectory of the <literal>rmas</literal> subdirectory of the <literal>home</literal> directory present in the root. The kernel translates between this naming system and the actual, physical storage on a disk."
880 msgstr "Le point de départ de cette arborescence est la racine, <filename>/</filename>. Il s'agit d'un répertoire pouvant contenir des sous-répertoires, chacun étant identifié par son nom. Par exemple, le sous-répertoire <literal>home</literal> de <filename>/</filename> est noté <filename>/home/</filename> ; ce sous-répertoire peut à son tour contenir d'autres sous-répertoires et ainsi de suite. Chaque répertoire peut également contenir des fichiers, qui contiendront les données réellement stockées. Le nom de fichier <filename>/home/rmas/Bureau/hello.txt</filename> désigne ainsi un fichier appelé <literal>hello.txt</literal>, stocké dans le sous-répertoire <literal>Bureau</literal> du sous-répertoire <literal>rmas</literal> du répertoire <literal>home</literal> présent à la racine. Le noyau fait alors la traduction entre ce système de nommage de fichiers et leur format de stockage physique sur disque."
881
882 #, fuzzy
883 #| msgid "<primary><command>init</command></primary>"
884 msgid "<primary><command>mount</command></primary>"
885 msgstr "<primary><command>init</command></primary>"
886
887 msgid "Unlike other systems, there is only one such hierarchy, and it can integrate data from several disks. One of these disks is used as the root, and the others are “mounted” on directories in the hierarchy (the Unix command is called <command>mount</command>); these other disks are then available under these “mount points”. This allows storing users' home directories (traditionally stored within <filename>/home/</filename>) on a second hard disk, which will contain the <literal>rhertzog</literal> and <literal>rmas</literal> directories. Once the disk is mounted on <filename>/home/</filename>, these directories become accessible at their usual locations, and paths such as <filename>/home/rmas/Desktop/hello.txt</filename> keep working."
888 msgstr "Contrairement à d'autres systèmes, cette arborescence est unique et peut intégrer les données de plusieurs disques. L'un de ces disques est alors utilisé comme racine, les autres étant « montés » dans des répertoires de l'arborescence (la commande Unix qui réalise cela est <command>mount</command>) ; ces autres disques sont alors accessibles sous ces « points de montage ». On peut ainsi déporter sur un deuxième disque dur les données personnelles des utilisateurs (qui sont traditionnellement stockées dans <filename>/home/</filename>). Ce disque contiendra alors les répertoires <literal>rhertzog</literal> et <literal>rmas</literal>. Une fois le disque monté dans <filename>/home/</filename>, ces répertoires deviendront accessibles aux emplacements habituels, et on pourra retrouver <filename>/home/rmas/Bureau/hello.txt</filename>."
889
890 msgid "<primary><command>mkfs</command></primary>"
891 msgstr "<primary><command>mkfs</command></primary>"
892
893 msgid "There are many filesystem formats, corresponding to many ways of physically storing data on disks. The most widely known are <emphasis>ext3</emphasis> and <emphasis>ext4</emphasis>, but others exist. For instance, <emphasis>vfat</emphasis> is the system that was historically used by DOS and Windows operating systems, which allows using hard disks under Debian as well as under Windows. In any case, a filesystem must be prepared on a disk before it can be mounted and this operation is known as “formatting”. Commands such as <command>mkfs.ext3</command> (where <command>mkfs</command> stands for <emphasis>MaKe FileSystem</emphasis>) handle formatting. These commands require, as a parameter, a device file representing the partition to be formatted (for instance, <filename>/dev/sda1</filename>). This operation is destructive and should only be run once, except if one deliberately wishes to wipe a filesystem and start afresh."
894 msgstr "Il existe différents systèmes de fichiers, qui correspondent à différentes manières de stocker physiquement les données sur les disques. Les plus connus sont <emphasis>ext3</emphasis> et <emphasis>ext4</emphasis>, mais il en existe d'autres. Par exemple, <emphasis>vfat</emphasis> est le système historiquement utilisé par les systèmes de type DOS et Windows et permet donc d'utiliser des disques durs sous Debian autant que sous Windows. Dans tous les cas, il faut préparer le système de fichiers avant de pouvoir le monter ; cette opération, fréquemment appelée formatage, est effectuée par le biais de commandes comme <command>mkfs.ext3</command> (<command>mkfs</command> étant une abréviation de <foreignphrase>MaKe FileSystem</foreignphrase>). Ces commandes prennent en paramètre le fichier de périphérique représentant la partition à formater (par exemple <filename>/dev/hda1</filename>). Cette opération destructrice n'est à exécuter qu'une seule fois, sauf si l'on souhaite délibérément vider le contenu du système de fichiers et repartir de zéro."
895
896 msgid "There are also network filesystems, such as <acronym>NFS</acronym>, where data is not stored on a local disk. Instead, data is transmitted through the network to a server that stores and retrieves them on demand. The filesystem abstraction shields users from having to care: files remain accessible in their usual hierarchical way."
897 msgstr "Il existe aussi des systèmes de fichiers réseau, comme <acronym>NFS</acronym>, où les données ne sont pas stockées sur un disque local ; elles sont en effet transmises à un serveur sur le réseau, qui les stockera lui-même et les restituera à la demande ; l'abstraction du système de fichiers permet aux utilisateurs de ne pas avoir à s'en soucier : les fichiers resteront accessibles par leurs emplacements dans l'arborescence."
898
899 msgid "Shared Functions"
900 msgstr "Fonctions partagées"
901
902 msgid "Since a number of the same functions are used by all software, it makes sense to centralize them in the kernel. For instance, shared filesystem handling allows any application to simply open a file by name, without needing to worry where the file is stored physically. The file can be stored in several different slices on a hard disk, or split across several hard disks, or even stored on a remote file server. Shared communication functions are used by applications to exchange data independently of the way the data is transported. For instance, transport could be over any combination of local or wireless networks, or over a telephone landline."
903 msgstr "Le noyau est également responsable de fonctions utilisées par tous les logiciels et qu'il est judicieux de centraliser ainsi. Ces fonctions incluent notamment la gestion des systèmes de fichiers, permettant à une application d'ouvrir simplement un fichier en fonction de son nom, sans avoir à se préoccuper de l'emplacement physique du fichier (qui peut se trouver morcelé en plusieurs emplacements d'un disque dur, voire entre plusieurs disques durs, ou stocké à distance sur un serveur de fichiers). Il s'agit également de fonctions de communication, que les applications pourront appeler pour échanger des informations à travers le réseau sans se soucier du mode de transport des données (qui pourront transiter sur un réseau local, une ligne téléphonique, un réseau sans fil ou une combinaison de tout cela)."
904
905 msgid "A process is a running instance of a program. This requires memory to store both the program itself and its operating data. The kernel is in charge of creating and tracking them. When a program runs, the kernel first sets aside some memory, then loads the executable code from the filesystem into it, and then starts the code running. It keeps information about this process, the most visible of which is an identification number known as <emphasis>pid</emphasis> (<emphasis>process identifier</emphasis>)."
906 msgstr "Un processus correspond à un programme en cours d'exécution. Ceci inclut une zone de mémoire dans laquelle est stocké le programme lui-même, mais également l'ensemble des données sur lesquelles le programme travaille. Le noyau est responsable de la création des processus et de leur suivi : lorsqu'un programme est lancé, le noyau met de côté cette zone de mémoire qu'il réserve au processus, y charge (depuis le disque) le code du programme et lance l'exécution. Il garde également des informations qui concernent ce processus, notamment un numéro d'identification (<foreignphrase>pid</foreignphrase>, pour <foreignphrase>process identifier</foreignphrase>)."
907
908 msgid "Unix-like kernels (including Linux), like most other modern operating systems, are capable of “multi-tasking”. In other words, they allow running many processes “at the same time”. There is actually only one running process at any one time, but the kernel cuts time into small slices and runs each process in turn. Since these time slices are very short (in the millisecond range), they create the illusion of processes running in parallel, although they are actually only active during some time intervals and idle the rest of the time. The kernel's job is to adjust its scheduling mechanisms to keep that illusion, while maximizing the global system performance. If the time slices are too long, the application may not appear as responsive as desired. Too short, and the system loses time switching tasks too frequently. These decisions can be tweaked with process priorities. High-priority processes will run for longer and with more frequent time slices than low-priority processes."
909 msgstr "Les noyaux de type Unix (dont fait partie Linux), comme la plupart des systèmes d'exploitation modernes, sont dits « multi-tâches », c'est-à-dire qu'ils permettent l'exécution « simultanée » de nombreux processus. En réalité, un seul processus peut fonctionner à un instant donné ; le noyau découpe alors le fil du temps en fines tranches et exécute les différents processus à tour de rôle. Comme ces intervalles de temps ont des durées très courtes (de l'ordre de la milliseconde), l'utilisateur a l'illusion de programmes s'exécutant en parallèle, alors qu'ils ne sont en réalité actifs que pendant certains intervalles et suspendus le reste du temps. La tâche du noyau est d'ajuster ses mécanismes d'ordonnancement pour parfaire cette illusion tout en maximisant les performances globales du système : si les intervalles sont trop longs, l'application manquera de réactivité vis-à-vis de l'utilisateur ; s'ils sont trop courts, le système perdra du temps à basculer d'une tâche à l'autre trop souvent. Ces décisions peuvent être influencées par des notions de priorités affectées à un processus ; un processus de haute priorité bénéficiera pour s'exécuter d'intervalles de temps plus longs et plus fréquents qu'un processus de basse priorité."
910
911 msgid "<emphasis>NOTE</emphasis> Multi-processor systems (and variants)"
912 msgstr "<emphasis>NOTE</emphasis> Systèmes multi-processeurs et assimilés"
913
914 msgid "The limitation described above of only one process being able to run at a time, doesn't always apply. The actual restriction is that there can only be one running process <emphasis>per processor core</emphasis> at a time. Multi-processor, multi-core or “hyper-threaded” systems allow several processes to run in parallel. The same time-slicing system is still used, though, so as to handle cases where there are more active processes than available processor cores. This is far from unusual: a basic system, even a mostly idle one, almost always has tens of running processes."
915 msgstr "La limitation évoquée ci-dessus d'un seul processus pouvant fonctionner à la fois, ne s'applique pas systématiquement. La réelle restriction est qu'il ne peut s'exécuter à un instant donné qu'un processus <emphasis>par cœur de processeur</emphasis>. Les systèmes multi-processeurs, multi-cœurs ou proposant de l'<foreignphrase>hyperthreading</foreignphrase> permettent en effet à plusieurs processus d'être exécutés simultanément. Le même principe de découpage du temps en intervalles attribués à tour de rôle aux processus actifs reste appliqué, afin de pouvoir traiter le cas où le nombre de processus en cours est supérieur à celui des cœurs disponibles. Cette situation est loin d'être exceptionnelle : un système de base, même peu actif, a presque toujours quelques dizaines de processus en cours d'exécution."
916
917 msgid "Of course, the kernel allows running several independent instances of the same program. But each can only access its own time slices and memory. Their data thus remain independent."
918 msgstr "Bien entendu, le noyau autorise l'exécution en parallèle de plusieurs processus correspondant au même programme : chacun dispose alors de ses propres intervalles de temps pour s'exécuter, ainsi que de sa zone de mémoire réservée. Comme un processus n'a accès qu'à sa propre zone de mémoire, les données de chacun restent indépendantes."
919
920 msgid "Rights Management"
921 msgstr "Gestion des permissions"
922
923 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>daemon</foreignphrase></primary>
924 #, fuzzy
925 #| msgid "<primary>daemon</primary>"
926 msgid "<primary>permissions</primary>"
927 msgstr "<primary>démon</primary>"
928
929 msgid "Unix-like systems are also multi-user. They provide a rights management system that supports separate users and groups; it also allows control over actions based on permissions. The kernel manages data for each process, allowing it to control permissions. Most of the time, a process is identified by the user who started it. That process is only permitted to take those actions available to its owner. For instance, trying to open a file requires the kernel to check the process identity against access permissions (for more details on this particular example, see <xref linkend=\"sect.rights-management\" />)."
930 msgstr "Les systèmes de type Unix sont également multi-utilisateurs. Ils intègrent une notion de droits séparant les utilisateurs et les groupes d'utilisateurs entre eux ; ils autorisent ou non certaines actions en fonction de l'ensemble de droits dont on dispose. Le noyau gère donc, pour chaque processus, un ensemble de données qui vérifient les permissions de ce processus. En règle générale, il s'agit de « l'identité » sous laquelle tourne le processus, qui correspond le plus souvent au compte utilisateur qui a déclenché son exécution. Beaucoup d'actions ne pourront être menées à bien par le processus que s'il dispose des permissions requises. Par exemple, l'opération d'ouverture d'un fichier est subordonnée à une vérification de la compatibilité entre les permissions du fichier et l'identité du processus (cet exemple particulier est détaillé dans la <xref linkend=\"sect.rights-management\" />)."
931
932 msgid "<primary>kernel space</primary>"
933 msgstr "<primary>espace noyau</primary>"
934
935 msgid "“User space” refers to the runtime environment of normal (as opposed to kernel) processes. This does not necessarily mean these processes are actually started by users because a standard system normally has several “daemon” (or background) processes running before the user even opens a session. Daemon processes are also considered user-space processes."
936 msgstr "On appelle espace utilisateur l'environnement d'exécution des processus normaux, par opposition aux processus qui font partie du noyau. Cela ne signifie pas pour autant que tous ces processus soient réellement lancés directement par l'utilisateur : un système normal exécute un certain nombre de « démons » (ou processus d'arrière-plan) avant même que l'utilisateur ouvre une session de travail. Les « démons » sont alors considérés comme des processus de l'espace utilisateur."
937
938 msgid "<primary><command>init</command></primary>"
939 msgstr "<primary><command>init</command></primary>"
940
941 msgid "When the kernel gets past its initialization phase, it starts the very first process, <command>init</command>. Process #1 alone is very rarely useful by itself, and Unix-like systems run with many additional processes."
942 msgstr "Lorsque le noyau a terminé son initialisation, il lance le tout premier processus, <command>init</command>, qui n'est généralement pas utile par lui-même. Les systèmes Unix fonctionnent donc avec de nombreux processus supplémentaires."
943
944 msgid "<primary><emphasis>fork</emphasis></primary>"
945 msgstr "<primary><foreignphrase>fork</foreignphrase></primary>"
946
947 msgid "First of all, a process can clone itself (this is known as a <emphasis>fork</emphasis>). The kernel allocates a new (but identical) process memory space, and another process to use it. At this time, the only difference between these two processes is their <emphasis>pid</emphasis>. The new process is usually called a child process, and the original process whose <emphasis>pid</emphasis> doesn't change, is called the parent process."
948 msgstr "Tout d'abord, un processus peut se dupliquer (on parle de <foreignphrase>fork</foreignphrase>). Le noyau alloue alors une nouvelle zone de mémoire pour le deuxième processus, de contenu identique à celle du premier, et se retrouve simplement avec un processus supplémentaire à gérer. À ce moment précis, la seule différence entre les deux processus est leur <foreignphrase>pid</foreignphrase>. Par convention, le nouveau processus est appelé le fils, alors que celui dont le <foreignphrase>pid</foreignphrase> n'a pas changé est appelé le père."
949
950 msgid "Sometimes, the child process continues to lead its own life independently from its parent, with its own data copied from the parent process. In many cases, though, this child process executes another program. With a few exceptions, its memory is simply replaced by that of the new program, and execution of this new program begins. This is the mechanism used by the init process (with process number 1) to start additional services and execute the whole startup sequence. At some point, one process among <command>init</command>'s offspring starts a graphical interface for users to log in to (the actual sequence of events is described in more details in <xref linkend=\"sect.system-boot\" />)."
951 msgstr "Il arrive que le processus fils reste tel quel et « vive sa vie », indépendamment de son père, avec ses propres données correspondant au programme initial. Néanmoins, le cas le plus fréquent est que ce fils exécute un autre programme ; à de rares exceptions près, sa zone mémoire est alors simplement remplacée par le nouveau programme, dont l'exécution démarre. C'est précisément ce mécanisme que le système d'initialisation (le processus n°1) exploite pour démarrer des services additionnels et exécuter la séquence de démarrage, jusqu'à aboutir au lancement d'une interface graphique pour l'utilisateur (la séquence des événements est décrite avec plus de détails dans la <xref linkend=\"sect.system-boot\" />)."
952
953 #, fuzzy
954 #| msgid "<primary>IDE</primary>"
955 msgid "<primary>shell</primary>"
956 msgstr "<primary>IDE</primary>"
957
958 msgid "<primary><literal>&amp;</literal></primary><see>background task</see>"
959 msgstr ""
960
961 msgid "When a process finishes the task for which it was started, it terminates. The kernel then recovers the memory assigned to this process, and stops giving it slices of running time. The parent process is told about its child process being terminated, which allows a process to wait for the completion of a task it delegated to a child process. This behavior is plainly visible in command-line interpreters (known as <emphasis>shells</emphasis>). When a command is typed into a shell, the prompt only comes back when the execution of the command is over. Most shells allow for running the command in the background, it is a simple matter of adding an <userinput>&amp;</userinput> to the end of the command. The prompt is displayed again right away, which can lead to problems if the command needs to display data of its own."
962 msgstr "Lorsqu'un processus finit la tâche qui lui était dévolue, il se termine. Le noyau récupère alors la mémoire qui lui était affectée et cesse de lui distribuer des intervalles de temps d'exécution. Le processus père est informé de la destruction du fils : cela permet entre autres au père d'attendre la complétion d'une tâche sous-traitée. On retrouve ce mode de fonctionnement dans les interpréteurs de commandes (shells) : lorsque l'on tape une commande dans un shell, on ne retrouve l'invite que lorsqu'elle s'est terminée. La plupart des shells permettent cependant de ne pas attendre la fin de l'exécution d'une commande : il suffit pour cela de faire suivre le nom du programme à exécuter par &amp;. On retrouve alors l'invite aussitôt, ce qui peut poser des problèmes si la commande a des données à afficher."
963
964 msgid "Daemons"
965 msgstr "Démons"
966
967 msgid "<primary>daemon</primary><seealso>background task</seealso>"
968 msgstr ""
969
970 msgid "A “daemon” is a process started automatically by the boot sequence. It keeps running (in the background) to perform maintenance tasks or provide services to other processes. This “background task” is actually arbitrary, and does not match anything particular from the system's point of view. They are simply processes, quite similar to other processes, which run in turn when their time slice comes. The distinction is only in the human language: a process that runs with no interaction with a user (in particular, without any graphical interface) is said to be running “in the background” or “as a daemon”."
971 msgstr "Un démon est un processus lancé automatiquement au démarrage et qui fonctionne en tâche de fond pour accomplir certaines tâches de maintenance ou fournir des services aux autres processus. Cette notion de « tâche de fond » est arbitraire et ne correspond à rien de particulier du point de vue du système : ce sont des processus comme les autres, qui sont exécutés chacun à leur tour pendant un bref intervalle de temps de la même manière que les applications visibles. La distinction est simplement humaine : un processus qui fonctionne sans interaction avec l'utilisateur (sans interface graphique, notamment) est dit fonctionner en tâche de fond ou en tant que démon."
972
973 msgid "<emphasis>VOCABULARY</emphasis> Daemon, demon, a derogatory term?"
974 msgstr "<emphasis>VOCABULAIRE</emphasis> Démon, un terme péjoratif ?"
975
976 msgid "Although <emphasis>daemon</emphasis> term shares its Greek etymology with <emphasis>demon</emphasis>, the former does not imply diabolical evil, instead, it should be understood as a kind of helper spirit. This distinction is subtle enough in English; it is even worse in other languages where the same word is used for both meanings."
977 msgstr "Le terme démon est en réalité une transcription un peu hâtive de l'anglais <foreignphrase>daemon</foreignphrase>. Bien que l'origine grecque de ce mot ait également donné le mot <foreignphrase>demon</foreignphrase>, au sens de créature diabolique, le <foreignphrase>daemon</foreignphrase> est simplement à interpréter comme un aide, un auxiliaire (tout en gardant une dimension surnaturelle). Il n'y a pas en français de mot réellement adapté à ce concept, le sens du <foreignphrase>daemon</foreignphrase> anglais s'est donc retrouvé projeté sur le « démon » français et l'usage a consacré ce choix bien qu'il ne soit pas très heureux."
978
979 msgid "Several such daemons are described in detail in <xref linkend=\"unix-services\" />."
980 msgstr "Plusieurs de ces démons sont détaillés dans le <xref linkend=\"unix-services\" />."
981
982 msgid "Inter-Process Communications"
983 msgstr "Communications entre processus"
984
985 msgid "<primary>IPC</primary>"
986 msgstr "<primary>IPC</primary>"
987
988 #, fuzzy
989 #| msgid "<primary>Inter-Process Communications</primary>"
990 msgid "<primary>Inter-Process Communications</primary><see>IPC</see>"
991 msgstr "<primary>communications inter-processus</primary>"
992
993 msgid "An isolated process, whether a daemon or an interactive application, is rarely useful on its own, which is why there are several methods allowing separate processes to communicate together, either to exchange data or to control one another. The generic term referring to this is <emphasis>inter-process communication</emphasis>, or IPC for short."
994 msgstr "Qu'il s'agisse de démons ou d'applications interactives, un processus isolé n'est souvent pas très utile. Il existe donc différentes méthodes permettant à des processus séparés de communiquer entre eux, soit pour s'échanger des données, soit pour se contrôler l'un l'autre. Le terme générique les désignant est <foreignphrase>InterProcess Communications</foreignphrase> (IPC) c'est-à-dire communications inter-processus."
995
996 msgid "The simplest IPC system is to use files. The process that wishes to send data writes it into a file (with a name known in advance), while the recipient only has to open the file and read its contents."
997 msgstr "Le système le plus simple est le fichier : le processus qui souhaite émettre des données les écrit dans un fichier dont le nom est convenu à l'avance ; le processus destinataire n'a alors qu'à lire ce fichier pour y récupérer les données."
998
999 # TODO: INTEGRATE ALTERNATE STRING: <primary><foreignphrase>pipe</foreignphrase></primary>
1000 msgid "<primary><emphasis>pipe</emphasis></primary>"
1001 msgstr "<primary>tube</primary>"
1002
1003 msgid "In the case where you do not wish to store data on disk, you can use a <emphasis>pipe</emphasis>, which is simply an object with two ends; bytes written in one end are readable at the other. If the ends are controlled by separate processes, this leads to a simple and convenient inter-process communication channel. Pipes can be classified into two categories: named pipes, and anonymous pipes. A named pipe is represented by an entry on the filesystem (although the transmitted data is not stored there), so both processes can open it independently if the location of the named pipe is known beforehand. In cases where the communicating processes are related (for instance, a parent and its child process), the parent process can also create an anonymous pipe before forking, and the child inherits it. Both processes will then be able to exchange data through the pipe without needing the filesystem."
1004 msgstr "Pour éviter que les données soient stockées sur un disque dur, on peut également utiliser un tuyau ou tube (<foreignphrase>pipe</foreignphrase> en anglais). Il s'agit simplement d'un système de communication où des octets écrits à un bout ressortent tels quels à l'autre bout. Si les deux extrémités sont contrôlées par deux processus différents, on obtient un canal de communication simple et pratique. Les tubes se décomposent en deux catégories. Un tube nommé dispose d'une entrée spéciale dans le système de fichiers (bien que les données qui y transitent n'y soient pas stockées) et les deux processus peuvent donc l'ouvrir indépendamment l'un de l'autre, si l'emplacement du tube nommé est connu. Dans les cas où l'on cherche à faire communiquer deux processus apparentés (par exemple un père et son fils), il est possible au père de créer un tube anonyme, dont héritera son fils après le <foreignphrase>fork</foreignphrase> ; les deux processus pourront alors s'échanger des données sans passer par le système de fichiers."
1005
1006 msgid "<emphasis>IN PRACTICE</emphasis> A concrete example"
1007 msgstr "<emphasis>EN PRATIQUE</emphasis> Un exemple concret"
1008
1009 msgid "Let's describe in some detail what happens when a complex command (a <emphasis>pipeline</emphasis>) is run from a shell. We assume we have a <command>bash</command> process (the standard user shell on Debian), with <emphasis>pid</emphasis> 4374; into this shell, we type the command: <command>ls | sort</command> ."
1010 msgstr "Étudions ce qui se passe lorsqu'on lance une commande complexe (un <foreignphrase>pipeline</foreignphrase>) dans un shell. Supposons que nous ayons un processus <command>bash</command> (le shell standard sous Debian), de <foreignphrase>pid</foreignphrase> 4 374, dans lequel nous tapons la commande <command>ls | sort</command>."
1011
1012 msgid "The shell first interprets the command typed in. In our case, it understands there are two programs (<command>ls</command> and <command>sort</command>), with a data stream flowing from one to the other (denoted by the <userinput>|</userinput> character, known as <emphasis>pipe</emphasis>). <command>bash</command> first creates an unnamed pipe (which initially exists only within the <command>bash</command> process itself)."
1013 msgstr "Le shell commence par interpréter la commande saisie. En l'occurrence, il s'agit de deux programmes (<command>ls</command> et <command>sort</command>), avec un flux de données de l'un vers l'autre (noté par le caractère <userinput>|</userinput>, dit <foreignphrase>pipe</foreignphrase>). <command>bash</command> crée donc un tube anonyme (qui n'existe pour l'instant que pour lui seul)."
1014
1015 msgid "Then the shell clones itself; this leads to a new <command>bash</command> process, with <emphasis>pid</emphasis> #4521 (<emphasis>pids</emphasis> are abstract numbers, and generally have no particular meaning). Process #4521 inherits the pipe, which means it is able to write in its “input” side; <command>bash</command> redirects its standard output stream to this pipe's input. Then it executes (and replaces itself with) the <command>ls</command> program, which lists the contents of the current directory. Since <command>ls</command> writes on its standard output, and this output has previously been redirected, the results are effectively sent into the pipe."
1016 msgstr "Puis il se duplique ; on obtient donc un nouveau processus <command>bash</command>, de <foreignphrase>pid</foreignphrase> 4 521 (les <foreignphrase>pids</foreignphrase> sont de simples numéros abstraits et n'ont généralement pas de signification particulière). Ce processus n°4 521 hérite du tuyau anonyme, il pourra donc écrire du côté « entrée » ; <command>bash</command> redirige d'ailleurs le flux de sortie standard vers cette entrée du tuyau. Il se remplace ensuite par le programme <command>ls</command>, qui va lister le contenu du répertoire courant ; comme il écrit sur sa sortie standard et que celle-ci a été au préalable redirigée, le résultat est effectivement envoyé dans le tuyau."
1017
1018 msgid "A similar operation happens for the second command: <command>bash</command> clones itself again, leading to a new <command>bash</command> process with pid #4522. Since it is also a child process of #4374, it also inherits the pipe; <command>bash</command> then connects its standard input to the pipe output, then executes (and replaces itself with) the <command>sort</command> command, which sorts its input and displays the results."
1019 msgstr "Une opération similaire est effectuée pour la deuxième commande : <command>bash</command> se duplique de nouveau, on obtient alors un nouveau processus <command>bash</command> de numéro 4 522. Comme ce dernier est également un fils du n°4 374, il hérite aussi du tuyau ; <command>bash</command> branche alors la sortie du tuyau sur son flux d'entrée standard, puis se remplace par le programme <command>sort</command>, dont la vocation est de trier les données reçues et d'afficher le résultat."
1020
1021 msgid "All the pieces of the puzzle are now set up: <command>ls</command> reads the current directory and writes the list of files into the pipe; <command>sort</command> reads this list, sorts it alphabetically, and displays the results. Processes numbers #4521 and #4522 then terminate, and #4374 (which was waiting for them during the operation), resumes control and displays the prompt to allow the user to type in a new command."
1022 msgstr "Toutes les pièces sont maintenant en place : <command>ls</command> parcourt le répertoire courant et envoie la liste des fichiers dans le tuyau ; <command>sort</command> lit cette liste, puis la trie par ordre alphabétique et affiche le résultat. Les processus n°4 521 et n°4 522 se terminent alors et le 4 374, qui s'était mis en attente, reprend la main et affiche l'invite pour permettre à l'utilisateur de saisir une nouvelle commande."
1023
1024 msgid "Not all inter-process communications are used to move data around, though. In many situations, the only information that needs to be transmitted are control messages such as “pause execution” or “resume execution”. Unix (and Linux) provides a mechanism known as <emphasis>signals</emphasis>, through which a process can simply send a specific signal (chosen from a predefined list of signals) to another process. The only requirement is to know the <emphasis>pid</emphasis> of the target."
1025 msgstr "Mais toutes les communications inter-processus ne servent pas à faire transiter des flux de données. Il arrive également que des applications aient simplement besoin de se transmettre des messages comme « suspendre l'exécution » ou « reprendre ». Unix (et donc Linux) fournit pour cela un mécanisme de signaux, par lequel un processus peut simplement envoyer un signal spécifique (parmi une liste prédéfinie de signaux) à un autre, simplement en connaissant son <foreignphrase>pid</foreignphrase>."
1026
1027 msgid "For more complex communications, there are also mechanisms allowing a process to open access, or share, part of its allocated memory to other processes. Memory now shared between them can be used to move data between the processes."
1028 msgstr "Pour des communications plus complexes, il existe aussi des mécanismes par lesquels un processus peut par exemple ouvrir l'accès d'une partie de sa zone mémoire à d'autres ; cette mémoire est alors partagée entre plusieurs processus, ce qui autorise à faire passer des données de l'un à l'autre."
1029
1030 msgid "Finally, network connections can also help processes communicate; these processes can even be running on different computers, possibly thousands of kilometers apart."
1031 msgstr "Enfin, les connexions par le réseau peuvent également servir à faire communiquer différents processus, susceptibles de s'exécuter sur des ordinateurs différents (voire séparés de milliers de kilomètres)."
1032
1033 msgid "It is quite standard for a typical Unix-like system to make use of all these mechanisms to various degrees."
1034 msgstr "Tous ces mécanismes sont utilisés, à des degrés divers, dans le fonctionnement normal d'un système Unix typique."
1035
1036 msgid "Libraries"
1037 msgstr "Bibliothèques"
1038
1039 msgid "<primary>library (of functions)</primary>"
1040 msgstr "<primary>bibliothèque (de fonctions)</primary>"
1041
1042 msgid "Function libraries play a crucial role in a Unix-like operating system. They are not proper programs, since they cannot be executed on their own, but collections of code fragments that can be used by standard programs. Among the common libraries, you can find:"
1043 msgstr "Les bibliothèques de fonctions jouent un rôle crucial dans le fonctionnement d'un système d'exploitation Unix. Ce ne sont pas à proprement parler des programmes, puisqu'elles ne s'exécutent pas indépendamment, mais des collections de fragments de programmes qui sont utilisés par des programmes classiques. Parmi les bibliothèques les plus courantes, citons par exemple :"
1044
1045 msgid "the standard C library (<emphasis>glibc</emphasis>), which contains basic functions such as ones to open files or network connections, and others facilitating interactions with the kernel;"
1046 msgstr "la bibliothèque C standard <emphasis>(glibc)</emphasis>, qui contient des fonctions de base telles que celles permettant d'ouvrir des fichiers ou des connexions réseau, mais aussi de faciliter les interactions avec le noyau ;"
1047
1048 msgid "graphical toolkits, such as Gtk+ and Qt, allowing many programs to reuse the graphical objects they provide;"
1049 msgstr "les boîtes à outils graphiques <foreignphrase>(toolkits)</foreignphrase>, Gtk+ et Qt, qui permettent à de nombreux programmes de réutiliser les objets graphiques qu'elles proposent ;"
1050
1051 msgid "the <emphasis>libpng</emphasis> library, which allows loading, interpreting and saving images in the PNG format."
1052 msgstr "la bibliothèque <emphasis>libpng</emphasis>, qui charge, interprète et sauvegarde des images au format PNG."
1053
1054 msgid "Thanks to those libraries, applications can reuse existing code. Application development is simplified since many applications can reuse the same functions. With libraries often developed by different persons, the global development of the system is closer to Unix's historical philosophy."
1055 msgstr "L'existence de ces bibliothèques permet aux applications de réutiliser du code existant ; leur développement en est simplifié d'autant, surtout lorsque de nombreuses applications font appel aux mêmes fonctions. Comme les bibliothèques sont souvent développées par des personnes différentes, le développement global du système est ainsi plus proche de la philosophie historique d'Unix."
1056
1057 msgid "<emphasis>CULTURE</emphasis> The Unix Way: one thing at a time"
1058 msgstr "<emphasis>CULTURE</emphasis> La méthode Unix : une chose à la fois"
1059
1060 msgid "One of the fundamental concepts that underlies the Unix family of operating systems is that each tool should only do one thing, and do it well; applications can then reuse these tools to build more advanced logic on top. This philosophy can be seen in many incarnations. Shell scripts may be the best example: they assemble complex sequences of very simple tools (such as <command>grep</command>, <command>wc</command>, <command>sort</command>, <command>uniq</command> and so on). Another implementation of this philosophy can be seen in code libraries: the <emphasis>libpng</emphasis> library allows reading and writing PNG images, with different options and in different ways, but it does only that; no question of including functions that display or edit images."
1061 msgstr "Un des concepts qui sous-tend le fonctionnement général des systèmes d'exploitation de la famille Unix est que chaque outil ne devrait faire qu'une chose, mais la faire bien, les applications pouvant alors réutiliser ces outils et construire une logique plus poussée par-dessus. Cela transparaît dans de nombreux domaines. Les scripts shell sont peut-être le meilleur exemple : ils assemblent en des séquences complexes des outils très simples (<command>grep</command>, <command>wc</command>, <command>sort</command>, <command>uniq</command>, etc.). Une autre mise en pratique de cette philosophie est visible dans les bibliothèques de code : la <emphasis>libpng</emphasis> permet de lire et d'écrire des images au format PNG, avec différentes options et de différentes manières, mais elle ne fait que cela ; pas question pour elle de proposer des fonctions d'affichage ou d'édition."
1062
1063 msgid "Moreover, these libraries are often referred to as “shared libraries”, since the kernel is able to only load them into memory once, even if several processes use the same library at the same time. This allows saving memory, when compared with the opposite (hypothetical) situation where the code for a library would be loaded as many times as there are processes using it."
1064 msgstr "De plus, ces bibliothèques sont souvent dites « partagées », parce que le noyau est capable de ne les charger qu'une fois en mémoire même si plusieurs processus y font appel. Si le code qu'elles contiennent était au contraire intégré dans les applications, il serait présent en mémoire autant de fois qu'il y a de processus qui l'utilisent."
1065
1066 #, fuzzy
1067 #| msgid "<primary>Firewire</primary>"
1068 msgid "<primary>shared library</primary>"
1069 msgstr "<primary>Firewire</primary>"
1070
1071 #, fuzzy
1072 #~| msgid "UEFI is a relatively recent development. Most new computers will support UEFI booting, but usually they also support BIOS booting alongside for backwards compatibility with operating systems that are not ready to exploit UEFI."
1073 #~ msgid "Most new computers will boot in UEFI mode by default, but usually they also support BIOS booting alongside for backwards compatibility with operating systems that are not ready to exploit UEFI."
1074 #~ msgstr "L'UEFI est un développement relativement récent. La plupart des nouveaux ordinateurs supportent le démarrage par UEFI, mais également le démarrage par le BIOS pour assurer la rétrocompatibilité avec des systèmes d'exploitation qui ne sont pas encore prêts pour l'UEFI."
1075
1076 #~ msgid ""
1077 #~ "\n"
1078 #~ "<computeroutput>$ </computeroutput><userinput>lspci</userinput>\n"
1079 #~ "<computeroutput>[...]\n"
1080 #~ "00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)\n"
1081 #~ "00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)\n"
1082 #~ "00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)\n"
1083 #~ "[...]\n"
1084 #~ "01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)\n"
1085 #~ "02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)\n"
1086 #~ "$ </computeroutput><userinput>lsusb</userinput>\n"
1087 #~ "<computeroutput>Bus 005 Device 004: ID 413c:a005 Dell Computer Corp.\n"
1088 #~ "Bus 005 Device 008: ID 413c:9001 Dell Computer Corp.\n"
1089 #~ "Bus 005 Device 007: ID 045e:00dd Microsoft Corp.\n"
1090 #~ "Bus 005 Device 006: ID 046d:c03d Logitech, Inc.\n"
1091 #~ "[...]\n"
1092 #~ "Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth\n"
1093 #~ "</computeroutput>"
1094 #~ msgstr ""
1095 #~ "\n"
1096 #~ "<computeroutput>$ </computeroutput><userinput>lspci</userinput>\n"
1097 #~ "<computeroutput>[...]\n"
1098 #~ "00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)\n"
1099 #~ "00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)\n"
1100 #~ "00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)\n"
1101 #~ "[...]\n"
1102 #~ "01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)\n"
1103 #~ "02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)\n"
1104 #~ "$ </computeroutput><userinput>lsusb</userinput>\n"
1105 #~ "<computeroutput>Bus 005 Device 004: ID 413c:a005 Dell Computer Corp.\n"
1106 #~ "Bus 005 Device 008: ID 413c:9001 Dell Computer Corp.\n"
1107 #~ "Bus 005 Device 007: ID 045e:00dd Microsoft Corp.\n"
1108 #~ "Bus 005 Device 006: ID 046d:c03d Logitech, Inc.\n"
1109 #~ "[...]\n"
1110 #~ "Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth\n"
1111 #~ "</computeroutput>"
1112
1113 #~ msgid "<primary>user space</primary>"
1114 #~ msgstr "<primary>espace utilisateur</primary>"