Debian Codegraph @

fr-FR/09_unix-services.po

raw
1 # AUTHOR <EMAIL@ADDRESS>, YEAR.
2 # anthony baldwin <[email protected]>, 2012.
3 # Raphaël Hertzog <[email protected]>, 2015.
4 msgid ""
5 msgstr ""
6 "Project-Id-Version: 0\n"
7 "POT-Creation-Date: 2022-07-30 18:23+0200\n"
8 "PO-Revision-Date: 2021-11-01 22:38+0000\n"
9 "Last-Translator: Frédéric Daniel Luc Lehobey <[email protected]>\n"
10 "Language-Team: French <https://hosted.weblate.org/projects/debian-handbook/09_unix-services/fr/>\n"
11 "Language: fr-FR\n"
12 "MIME-Version: 1.0\n"
13 "Content-Type: text/plain; charset=UTF-8\n"
14 "Content-Transfer-Encoding: 8bit\n"
15 "Plural-Forms: nplurals=2; plural=n > 1;\n"
16 "X-Generator: Weblate 4.9-dev\n"
17
18 msgid "System boot"
19 msgstr "Démarrage du système"
20
21 msgid "Initscripts"
22 msgstr "Scripts d'initialisation"
23
24 msgid "SSH"
25 msgstr "SSH"
26
27 msgid "Telnet"
28 msgstr "Telnet"
29
30 msgid "Rights"
31 msgstr "Droits"
32
33 msgid "Permissions"
34 msgstr "Permissions"
35
36 msgid "Supervision"
37 msgstr "Supervision"
38
39 msgid "Inetd"
40 msgstr "Inetd"
41
42 msgid "Cron"
43 msgstr "Cron"
44
45 msgid "Backup"
46 msgstr "Sauvegarde"
47
48 msgid "Hotplug"
49 msgstr "Hotplug"
50
51 msgid "PCMCIA"
52 msgstr "PCMCIA"
53
54 msgid "APM"
55 msgstr "APM"
56
57 msgid "ACPI"
58 msgstr "ACPI"
59
60 msgid "Unix Services"
61 msgstr "Services Unix"
62
63 msgid "This chapter covers a number of basic services that are common to many Unix systems. All administrators should be familiar with them."
64 msgstr "Ce chapitre parcourt un ensemble de services fondamentaux, souvent communs à beaucoup d'Unix. Tout administrateur se doit de les connaître."
65
66 msgid "System Boot"
67 msgstr "Démarrage du système"
68
69 msgid "<primary>booting</primary><secondary>the system</secondary>"
70 msgstr "<primary>démarrage</primary><secondary>du système</secondary>"
71
72 #, fuzzy
73 #| msgid "<primary>SSH</primary>"
74 msgid "<primary>BIOS</primary>"
75 msgstr "<primary>SSH</primary>"
76
77 #, fuzzy
78 #| msgid "<primary>TAR</primary>"
79 msgid "<primary>MBR</primary>"
80 msgstr "<primary>TAR</primary>"
81
82 #, fuzzy
83 #| msgid "<primary>SSH</primary>"
84 msgid "<primary>ESP</primary>"
85 msgstr "<primary>SSH</primary>"
86
87 #, fuzzy
88 #| msgid "<primary>tunnel (SSH)</primary><seealso>VPN</seealso>"
89 msgid "<primary>Compatibility Support Mode</primary><see>CSM</see>"
90 msgstr "<primary>SSH</primary><secondary>tunnel SSH</secondary><seealso>VPN</seealso>"
91
92 #, fuzzy
93 #| msgid "<primary>APM</primary>"
94 msgid "<primary>CSM</primary>"
95 msgstr "<primary>APM</primary>"
96
97 msgid "When you boot the computer, the many messages scrolling by on the console display many automatic initializations and configurations that are being executed. Sometimes you may wish to slightly alter how this stage works, which means that you need to understand it well. That is the purpose of this section."
98 msgstr "Lorsque l'ordinateur démarre, les messages défilant sur la console révèlent de nombreuses initialisations et configurations automatiques. Parfois, il est souhaitable de modifier légèrement le déroulement de cette étape, ce qui implique de bien la comprendre. C'est l'objet de cette section."
99
100 msgid "On systems with a BIOS, first, the BIOS takes control of the computer, initializes the controllers and hardware, detects the disks, and bridges everything together. Then it looks up the <emphasis>Master Boot Record</emphasis> (MBR) of the first disk in the boot order and loads the code stored there (first stage). This code then launches the second stage and finally executes the bootloader."
101 msgstr ""
102
103 msgid "In contrast to the BIOS, UEFI is more sophisticated, it knows filesystems and can read the partition tables. The interface searches the system storage for a partition labeled with a specific globally unique identifier (<acronym>GUID</acronym>) that marks it as the <acronym>EFI System Partition</acronym> (<acronym>ESP</acronym>), where the bootloaders, boot managers, UEFI shell, etc., are located, and launches the desired bootloader. If Secure Boot is enabled, the boot process will verify authenticity of the EFI binaries there by signature (thus <emphasis role=\"pkg\">grub-efi-<replaceable>arch</replaceable>-signed</emphasis> is required in this case). The UEFI specification also defines support for booting in legacy BIOS mode. This is called the <emphasis>Compatibility Support Module</emphasis> (<acronym>CSM</acronym>). If CSM is enabled, it will attempt to boot from a drive's MBR. However, many new systems do no longer support the CSM mode."
104 msgstr ""
105
106 #, fuzzy
107 #| msgid "First, the BIOS takes control of the computer, detects the disks, loads the <emphasis>Master Boot Record</emphasis>, and executes the bootloader. The bootloader takes over, finds the kernel on the disk, loads and executes it. The kernel is then initialized, and starts to search for and mount the partition containing the root filesystem, and finally executes the first program — <command>init</command>. Frequently, this “root partition” and this <command>init</command> are, in fact, located in a virtual filesystem that only exists in RAM (hence its name, “initramfs”, formerly called “initrd” for “initialization RAM disk”). This filesystem is loaded in memory by the bootloader, often from a file on a hard drive or from the network. It contains the bare minimum required by the kernel to load the “true” root filesystem: this may be driver modules for the hard drive, or other devices without which the system cannot boot, or, more frequently, initialization scripts and modules for assembling RAID arrays, opening encrypted partitions, activating LVM volumes, etc. Once the root partition is mounted, the initramfs hands over control to the real init, and the machine goes back to the standard boot process."
108 msgid "In both cases then the actual bootloader takes over, finds either a chained bootloader or the kernel on the disk, loads, and executes it. The kernel is then initialized, and starts to search for and mount the partition containing the root filesystem, and finally executes the first program — <command>init</command>. Frequently, this “root partition” and this <command>init</command> are, in fact, located in a virtual filesystem that only exists in RAM (hence its name, “initramfs”, formerly called “initrd” for “initialization RAM disk”). This filesystem is loaded in memory by the bootloader, often from a file on a hard drive or from the network. It contains the bare minimum required by the kernel to load the “true” root filesystem: this may be driver modules for the hard drive, or other devices without which the system cannot boot, or, more frequently, initialization scripts and modules for assembling RAID arrays, opening encrypted partitions, activating LVM volumes, etc. Once the root partition is mounted, the initramfs hands over control to the real init, and the machine goes back to the standard boot process."
109 msgstr "En tout premier lieu, le BIOS prend le contrôle de l'ordinateur, détecte les disques, charge le <emphasis>Master Boot Record</emphasis> (enregistrement d'amorçage maître) et l'exécute. Le chargeur d'amorçage prend alors le relais, trouve le noyau sur le disque, le charge et l'exécute. Le noyau s'initialise alors et se met en devoir de trouver et monter la partition contenant la racine de l'arborescence pour enfin démarrer le premier programme : <command>init</command>. Il est fréquent que cette « partition racine » et cet <command>init</command> soient en réalité sur un système de fichiers virtuel qui n'existe qu'en mémoire vive (d'où son nom <foreignphrase>initramfs</foreignphrase>, anciennement appelé <foreignphrase>initrd</foreignphrase> pour <foreignphrase>initialization RAM disk</foreignphrase>). Ce système de fichiers est chargé en mémoire par le chargeur d'amorçage, souvent à partir d'un fichier sur un disque dur ou sur le réseau. Il contient le strict minimum qui peut être requis par le noyau pour charger le « vrai » système de fichiers racine : il peut s'agir de modules de pilotes pour les disques durs ou d'autres périphériques sans lesquels le système ne peut pas démarrer, ou, plus fréquemment, des modules et des scripts d'initialisation permettant d'assembler des grappes RAID, d'ouvrir des partitions chiffrées, d'activer des volumes LVM… Une fois que la partition racine est montée, l'<foreignphrase>initramfs</foreignphrase> passe la main au vrai <command>init</command> et on revient sur le processus de démarrage standard."
110
111 msgid "The systemd init system"
112 msgstr "Le système d'initialisation systemd"
113
114 #, fuzzy
115 #| msgid "<primary>booting</primary><secondary>the system</secondary>"
116 msgid "<primary><command>init</command></primary><secondary><emphasis role=\"pkg\">systemd</emphasis></secondary>"
117 msgstr "<primary>démarrage</primary><secondary>du système</secondary>"
118
119 msgid "The “real init” is currently provided by <emphasis role=\"pkg\">systemd</emphasis> and this section documents this init system."
120 msgstr "Le « vrai init » est actuellement fourni par <emphasis role=\"pkg\">systemd</emphasis>, sur lequel cette section se focalise."
121
122 msgid "<emphasis>CULTURE</emphasis> Before <command>systemd</command>"
123 msgstr "<emphasis>CULTURE</emphasis> Avant <command>systemd</command>"
124
125 msgid "<primary><command>init</command></primary><secondary><emphasis role=\"pkg\">sysv-rc</emphasis></secondary><seealso>System V init</seealso>"
126 msgstr ""
127
128 #, fuzzy
129 #| msgid "<primary>sticky bit</primary>"
130 msgid "<primary>System V init</primary>"
131 msgstr "<primary><foreignphrase>sticky bit</foreignphrase></primary>"
132
133 msgid "<command>systemd</command> is a relatively recent “init system”, and although it was already available, to a certain extent, in <emphasis role=\"distribution\">Wheezy</emphasis>, it has only become the default in Debian <emphasis role=\"distribution\">Jessie</emphasis>. Previous releases relied, by default, on the “System V init” (in the <emphasis role=\"pkg\">sysv-rc</emphasis> package), a much more traditional system. We describe the System V init later on."
134 msgstr "<command>systemd</command> un « système d'initialisation » relativement récent, et bien qu'il était déjà disponible – dans une certaine mesure – dans <emphasis role=\"distribution\">Wheezy</emphasis>, ce n'est que depuis <emphasis role=\"distribution\">Jessie</emphasis> qu'il est employé par défaut. Les versions précédentes de Debian exploitaient « System V » (du paquet <emphasis role=\"pkg\">sysv-rc</emphasis>), un système d'initialisation bien plus traditionnel qui sera présenté un peu plus loin."
135
136 msgid "<emphasis>ALTERNATIVE</emphasis> Other boot systems"
137 msgstr "<emphasis>ALTERNATIVE</emphasis> Autres systèmes d'initialisation"
138
139 #, fuzzy
140 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
141 msgid "<primary>boot systems</primary><seealso><command>init</command></seealso>"
142 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
143
144 #, fuzzy
145 #| msgid "This book describes the boot system used by default in Debian <emphasis role=\"distribution\">Buster</emphasis> (as implemented by the <emphasis role=\"pkg\">systemd</emphasis> package), as well as the previous default, <emphasis role=\"pkg\">sysvinit</emphasis>, which is derived and inherited from <emphasis>System V</emphasis> Unix systems; there are others."
146 msgid "This book describes the boot system used by default in Debian since <emphasis role=\"distribution\">Buster</emphasis> (as implemented by the <emphasis role=\"pkg\">systemd</emphasis> package), as well as the previous default, <emphasis role=\"pkg\">sysvinit</emphasis>, which is derived and inherited from <emphasis>System V</emphasis> Unix systems; there are others."
147 msgstr "Nous décrivons ici le processus d'initialisation utilisé par défaut sous Debian <emphasis role=\"distribution\">Buster</emphasis> (tel qu'implémenté par le paquet <emphasis role=\"pkg\">systemd</emphasis>), ainsi que l'ancien système, <emphasis role=\"pkg\">sysvinit</emphasis>, qui est dérivé et hérité des Unix de type <emphasis>System V</emphasis>, mais il en existe d'autres."
148
149 #, fuzzy
150 #| msgid "<primary>service</primary><secondary>restart</secondary>"
151 msgid "<primary><command>init</command></primary><secondary><emphasis role=\"pkg\">upstart</emphasis></secondary>"
152 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
153
154 #, fuzzy
155 #| msgid "The <command>upstart</command> system is still not perfectly tested on Debian. It is event based: init scripts are no longer executed in a sequential order but in response to events such as the completion of another script upon which they are dependent. This system, started by Ubuntu, is present in Debian <emphasis role=\"distribution\">Jessie</emphasis>, but is not the default; it comes, in fact, as a replacement for <emphasis role=\"pkg\">sysvinit</emphasis>, and one of the tasks launched by <command>upstart</command> is to launch the scripts written for traditional systems, especially those from the <emphasis role=\"pkg\">sysv-rc</emphasis> package."
156 msgid "The <command>upstart</command> system is still not perfectly tested on Debian. It is event based: init scripts are no longer executed in a sequential order but in response to events such as the completion of another script upon which they are dependent. This system, started by Ubuntu, was present in Debian <emphasis role=\"distribution\">Jessie</emphasis>, but was not the default; it came, in fact, as a replacement for <emphasis role=\"pkg\">sysvinit</emphasis>, and one of the tasks launched by <command>upstart</command> was to launch the scripts written for traditional systems, especially those from the <emphasis role=\"pkg\">sysv-rc</emphasis> package."
157 msgstr "Le système <command>upstart</command>, apparu plus récemment, n'est pas encore parfaitement testé sous Debian. Il est basé sur les événements ; les scripts de lancement ne sont plus exécutés de manière séquentielle mais en réponse à des événements comme l'aboutissement d'autres scripts dont ils dépendent. Ce système, initié par Ubuntu, est présent dans Debian <emphasis role=\"distribution\">Jessie</emphasis> mais n'est pas le système par défaut : il vient en fait en remplacement de <emphasis role=\"package\">sysvinit</emphasis> et une des tâches lancées par <command>upstart</command> est de lancer les scripts écrits pour les systèmes traditionnels, notamment ceux du paquet <emphasis role=\"package\">sysv-rc</emphasis>."
158
159 #, fuzzy
160 #| msgid "<primary>login</primary><secondary>remote login</secondary>"
161 msgid "<primary><command>init</command></primary><secondary><emphasis role=\"pkg\">openrc</emphasis></secondary>"
162 msgstr "<primary>connexion</primary><secondary>à distance</secondary>"
163
164 msgid "<command>openrc</command> is a dependency based service manager. It was originally written for the Gentoo project, but it aims at being platform agnostic. It maintains compatibility with the System V init system and provides support for booting, changing runlevels, starting and stopping services (in parallel), and shutting down."
165 msgstr ""
166
167 #, fuzzy
168 #| msgid "There are also other systems and other operating modes, such as <command>runit</command> or <command>minit</command>, but they are relatively specialized and not widespread."
169 msgid "There are also other systems and other operating modes, such as <command>file-rc</command>, <command>runit</command>, or <command>minit</command>, but some of them are relatively specialized and not widespread."
170 msgstr "Il existe encore bien d'autres systèmes et d'autres modes de fonctionnement, comme <command>runit</command> ou <command>minit</command>, mais ils sont relativement spécialisés et minoritaires."
171
172 msgid "Boot sequence of a computer running Linux with systemd"
173 msgstr "Étapes du démarrage d'un ordinateur sous Linux avec systemd"
174
175 msgid "<emphasis>SPECIFIC CASE</emphasis> Booting from the network"
176 msgstr "<emphasis>CAS PARTICULIER</emphasis> Le démarrage sur le réseau"
177
178 #, fuzzy
179 #| msgid "In some configurations, the BIOS may be configured not to execute the MBR, but to seek its equivalent on the network, making it possible to build computers without a hard drive, or which are completely reinstalled on each boot. This option is not available on all hardware and it generally requires an appropriate combination of BIOS and network card."
180 msgid "In some configurations, the system may be configured not to execute code from the physical hardware, but to seek its equivalent on the network, making it possible to build computers without a hard drive, or which are completely reinstalled on each boot. This option is not available on all hardware and it generally requires an appropriate combination of firmware and network card."
181 msgstr "Dans certaines configurations, le BIOS peut être configuré pour ne pas exécuter le MBR mais aller chercher son équivalent sur le réseau, ce qui permet par exemple de construire des ordinateurs sans disque dur, ou qui se réinstallent complètement à chaque démarrage. Cette possibilité n'est pas offerte par tous les matériels et il faut généralement une combinaison adaptée du BIOS et de la carte réseau."
182
183 msgid "Booting from the network can be used to launch the <command>debian-installer</command> or FAI (see <xref linkend=\"sect.installation-methods\" />)."
184 msgstr "Le démarrage sur le réseau peut être utilisé pour lancer <command>debian-installer</command> ou FAI (voir <xref linkend=\"sect.installation-methods\" />)."
185
186 msgid "<emphasis>BACK TO BASICS</emphasis> The process, a program instance"
187 msgstr "<emphasis>B.A.-BA</emphasis> Le processus, une invocation de programme"
188
189 msgid "<primary>process</primary>"
190 msgstr "<primary>processus</primary>"
191
192 #, fuzzy
193 #| msgid "A process is the representation in memory of a running program. It includes all of the information necessary for the proper execution of the software (the code itself, but also the data that it has in memory, the list of files that it has opened, the network connections it has established, etc.). A single program may be instantiated into several processes, not necessarily running under different user IDs."
194 msgid "A process is the representation of a running program in memory. It includes all of the information necessary for the proper execution of the software (the code itself, but also the data that it has in memory, the list of files that it has opened, the network connections it has established, etc.). A single program may be instantiated into several processes, not necessarily running under different user IDs."
195 msgstr "Un processus est la représentation en mémoire d'un programme qui s'exécute. Il regroupe toutes les informations nécessaires au bon déroulement du logiciel (le code lui-même, mais aussi les données qu'il a en mémoire, la liste des fichiers qu'il a ouverts, des connexions réseau qu'il a établies, etc.). Un même programme peut faire l'objet de plusieurs processus, y compris sous le même identifiant utilisateur."
196
197 msgid "<emphasis>SECURITY</emphasis> Using a shell as <command>init</command> to gain root rights"
198 msgstr "<emphasis>SÉCURITÉ</emphasis> Gare à la substitution d'<command>init</command> par un shell"
199
200 msgid "By convention, the first process that is booted is the <command>init</command> program (which is a symbolic link to <filename>/lib/systemd/systemd</filename> by default). However, it is possible to pass an <literal>init</literal> option to the kernel indicating a different program."
201 msgstr "Le premier processus démarré est par convention le programme <command>init</command> (qui par défaut est un lien symbolique vers <filename>/lib/systemd/systemd</filename>). Toutefois, il est possible de passer au noyau une option <literal>init</literal> indiquant un autre programme."
202
203 msgid "<primary><command>init</command></primary>"
204 msgstr "<primary><command>init</command></primary>"
205
206 msgid "Any person who is able to access the computer can press the <keycap>Reset</keycap> button, and thus reboot it. Then, at the bootloader's prompt, it is possible to pass the <literal>init=/bin/sh</literal> option to the kernel to gain root access without knowing the administrator's password."
207 msgstr "Toute personne capable d'accéder à l'ordinateur pourra appuyer sur le bouton <keycap>Reset</keycap> et ainsi le redémarrer, puis, via l'invite du chargeur d'amorçage, passer au noyau l'option <literal>init=/bin/sh</literal> pour obtenir un accès root sans connaître le mot de passe de l'administrateur."
208
209 msgid "To prevent this, you can protect the bootloader itself with a password. You might also think about protecting access to the BIOS (a password protection mechanism is almost always available), without which a malicious intruder could still boot the machine on a removable media containing its own Linux system, which they could then use to access data on the computer's hard drives."
210 msgstr "Pour éviter cela, on peut protéger le chargeur d'amorçage par un mot de passe. Pensez alors à protéger aussi l'accès au BIOS (un mécanisme de protection par mot de passe est presque toujours disponible), sans quoi un indélicat pourra toujours démarrer sur une disquette contenant son propre système Linux, qu'il utilisera pour accéder aux disques durs de l'ordinateur."
211
212 #, fuzzy
213 #| msgid "Finally, be aware that most BIOS have a generic password available. Initially intended for troubleshooting for those who have forgotten their password, these passwords are now public and available on the Internet (see for yourself by searching for “generic BIOS passwords” in a search engine). All of these protections will thus impede unauthorized access to the machine without being able to completely prevent it. There is no reliable way to protect a computer if the attacker can physically access it; they could dismount the hard drives to connect them to a computer under their own control anyway, or even steal the entire machine, or erase the BIOS memory to reset the password…"
214 msgid "Finally, be aware that most BIOS/EFI implementations have a generic password available. Initially intended for troubleshooting for those who have forgotten their password, these passwords are now public and available on the Internet (see for yourself by searching for “generic BIOS passwords” in a search engine). All of these protections will thus impede unauthorized access to the machine without being able to completely prevent it. There is no reliable way to protect a computer if the attacker can physically access it; they could dismount the hard drives to connect them to a computer under their own control anyway, or even steal the entire machine, or erase the BIOS memory to reset the password…"
215 msgstr "Sachez enfin que la plupart des BIOS disposent de passe-partout génériques. Prévus à l'origine pour dépanner les distraits qui oublient les leurs, ces mots de passe sont désormais publics et diffusés sur Internet (vérifiez vous-même en cherchant <foreignphrase>BIOS generic passwords</foreignphrase> sur un moteur de recherche). Toutes ces protections ralentiront donc l'accès non autorisé à la machine, sans pouvoir l'empêcher totalement. C'est pourquoi il est vain de chercher à protéger un ordinateur si l'attaquant peut y accéder physiquement : il pourra de toute manière démonter les disques durs pour les brancher sur un ordinateur sous son contrôle, voire voler l'ordinateur entier, ou vider la mémoire du BIOS pour remettre à zéro le mot de passe…"
216
217 #, fuzzy
218 #| msgid "Systemd executes several processes, in charge of setting up the system: keyboard, drivers, filesystems, network, services. It does this while keeping a global view of the system as a whole, and the requirements of the components. Each component is described by a “unit file” (sometimes more); the general syntax is derived from the widely-used “*.ini files“ syntax, with <literal><replaceable>key</replaceable> = <replaceable>value</replaceable></literal> pairs grouped between <literal>[<replaceable>section</replaceable>]</literal> headers. Unit files are stored under <filename>/lib/systemd/system/</filename> and <filename>/etc/systemd/system/</filename>; they come in several flavours, but we will focus on “services” and “targets” here."
219 msgid "Systemd executes several processes, in charge of setting up the system: keyboard, drivers, filesystems, network, services. It does this while keeping a global view of the system as a whole, and the requirements of the components. Each component is described by a “unit file” (sometimes more); the general syntax is derived from the widely-used “*.ini files“ syntax, with <literal><replaceable>key</replaceable> = <replaceable>value</replaceable></literal> pairs grouped between <literal>[<replaceable>section</replaceable>]</literal> headers. Unit files are stored under <filename>/lib/systemd/system/</filename> and <filename>/etc/systemd/system/</filename>; they come in several flavors, but we will focus on “services” and “targets” here."
220 msgstr "<command>systemd</command> exécute plusieurs processus qui ont la responsabilité de mettre en place le système : clavier, pilotes, systèmes de fichiers, réseau et services. Il effectue cela en conservant une vue globale du système et des exigences de chaque composant. Chaque composant est décrit par un (ou plusieurs) « fichier unité » <foreignphrase>(unit file)</foreignphrase> ; la syntaxe générale est dérivée de celle des « fichiers *.ini », avec des paires <literal><replaceable>clé</replaceable> = <replaceable>valeur</replaceable></literal> regroupées entre des en-têtes <literal>[<replaceable>section</replaceable>]</literal>. Ces fichiers sont placés dans <filename>/lib/systemd/system/</filename> et dans <filename>/etc/systemd/system/</filename> ; ils en existent plusieurs sortes (chacune avec sa spécialité) mais dans cette section on ne traitera que des <foreignphrase>services</foreignphrase> et des <foreignphrase>targets</foreignphrase> (« cibles »)."
221
222 #, fuzzy
223 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
224 msgid "<primary><command>systemd</command></primary><secondary><filename>.service</filename> file</secondary>"
225 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
226
227 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/systemd/system/</filename></secondary><see><command>systemd</command></see>"
228 msgstr ""
229
230 #, fuzzy
231 #| msgid "<primary>service</primary><secondary>restart</secondary>"
232 msgid "<primary>service</primary><secondary><filename>ssh.service</filename></secondary>"
233 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
234
235 #, fuzzy
236 #| msgid "A systemd “service file” describes a process managed by systemd. It contains roughly the same information as old-style init-scripts, but expressed in a declaratory (and much more concise) way. Systemd handles the bulk of the repetitive tasks (starting and stopping the process, checking its status, logging, dropping privileges, and so on), and the service file only needs to fill in the specifics of the process. For instance, here is the service file for SSH:"
237 msgid "A systemd “<filename>.service</filename> file” describes a process managed by systemd. It contains roughly the same information as old-style init-scripts, but expressed in a declaratory (and much more concise) way. Systemd handles the bulk of the repetitive tasks (starting and stopping the process, checking its status, logging, dropping privileges, and so on), and the service file only needs to fill in the specifics of the process. For instance, here is the service file for SSH:"
238 msgstr "Un « fichier service » de systemd décrit un processus géré par systemd. Il contient approximativement les mêmes informations que les anciens scripts d'initialisation, mais exprimés d'une manière déclarative (et bien plus concise). <command>systemd</command> s'occupe de toutes les tâches répétitives (démarrer et arrêter le processus, vérifier son état, enregistrer des logs, abandonner des privilèges, etc.), et le fichier service n'a plus qu'à préciser les particularités du processus. Voici par exemple celui pour SSH :"
239
240 #, fuzzy
241 #| msgid ""
242 #| "[Unit]\n"
243 #| "Description=OpenBSD Secure Shell server\n"
244 #| "After=network.target auditd.service\n"
245 #| "ConditionPathExists=!/etc/ssh/sshd_not_to_be_run\n"
246 #| "\n"
247 #| "[Service]\n"
248 #| "EnvironmentFile=-/etc/default/ssh\n"
249 #| "ExecStart=/usr/sbin/sshd -D $SSHD_OPTS\n"
250 #| "ExecReload=/bin/kill -HUP $MAINPID\n"
251 #| "KillMode=process\n"
252 #| "Restart=on-failure\n"
253 #| "\n"
254 #| "[Install]\n"
255 #| "WantedBy=multi-user.target\n"
256 #| "Alias=sshd.service"
257 msgid ""
258 "[Unit]\n"
259 "Description=OpenBSD Secure Shell server\n"
260 "Documentation=man:sshd(8) man:sshd_config(5)\n"
261 "After=network.target auditd.service\n"
262 "ConditionPathExists=!/etc/ssh/sshd_not_to_be_run\n"
263 "\n"
264 "[Service]\n"
265 "EnvironmentFile=-/etc/default/ssh\n"
266 "ExecStartPre=/usr/sbin/sshd -t\n"
267 "ExecStart=/usr/sbin/sshd -D $SSHD_OPTS\n"
268 "ExecReload=/usr/sbin/sshd -t\n"
269 "ExecReload=/bin/kill -HUP $MAINPID\n"
270 "KillMode=process\n"
271 "Restart=on-failure\n"
272 "RestartPreventExitStatus=255\n"
273 "Type=notify\n"
274 "RuntimeDirectory=sshd\n"
275 "RuntimeDirectoryMode=0755\n"
276 "\n"
277 "[Install]\n"
278 "WantedBy=multi-user.target\n"
279 "Alias=sshd.service"
280 msgstr ""
281 "[Unit]\n"
282 "Description=OpenBSD Secure Shell server\n"
283 "After=network.target auditd.service\n"
284 "ConditionPathExists= !/etc/ssh/sshd_not_to_be_run\n"
285 "\n"
286 "[Service]\n"
287 "EnvironmentFile=-/etc/default/ssh\n"
288 "ExecStart=/usr/sbin/sshd -D $SSHD_OPTS\n"
289 "ExecReload=/bin/kill -HUP $MAINPID\n"
290 "KillMode=process\n"
291 "Restart=on-failure\n"
292 "\n"
293 "[Install]\n"
294 "WantedBy=multi-user.target\n"
295 "Alias=sshd.service"
296
297 msgid "The <literal>[Unit]</literal> section contains generic information about the service, like its description and manual page resources, as well as relations (dependency and order) to other services. The <literal>[Service]</literal> part contains the declarations related to the service execution (starting, stopping, killing, restarting), directories and configuration file(s) used. The last section, <literal>[Install]</literal>, again carries generic information into which targets to install the service and, in this case, the alias that can be used instead of the service name. As you can see, there is very little code in there, only declarations. Systemd takes care of displaying progress reports, keeping track of the processes, and even restarting them when needed. The syntax of these files is fully described in several manual pages (e.g. <citerefentry><refentrytitle>systemd.service</refentrytitle> <manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.unit</refentrytitle> <manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.exec</refentrytitle> <manvolnum>5</manvolnum></citerefentry>, etc.)."
298 msgstr ""
299
300 #, fuzzy
301 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
302 msgid "<primary><command>systemd</command></primary><secondary><filename>.target</filename> file</secondary>"
303 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
304
305 #, fuzzy
306 #| msgid "A systemd “target file” describes a state of the system, where a set of services are known to be operational. It can be thought of as an equivalent of the old-style runlevel. One of the targets is <literal>local-fs.target</literal>; when it is reached, the rest of the system can assume that all local filesystems are mounted and accessible. Other targets include <literal>network-online.target</literal> and <literal>sound.target</literal>. The dependencies of a target can be listed either within the target file (in the <literal>Requires=</literal> line), or using a symbolic link to a service file in the <literal>/lib/systemd/system/<replaceable>targetname</replaceable>.target.wants/</literal> directory. For instance, <filename>/etc/systemd/system/printer.target.wants/</filename> contains a link to <filename>/lib/systemd/system/cups.service</filename>; systemd will therefore ensure CUPS is running in order to reach <literal>printer.target</literal>."
307 msgid "A systemd “<filename>.target</filename> file” describes a state of the system where a set of services are known to be operational. It can be thought of as an equivalent of the old-style runlevel. One of the pre-defined targets is <literal>local-fs.target</literal>; when it is reached, the rest of the system can assume that all local filesystems are mounted and accessible. Other targets include <literal>network-online.target</literal> and <literal>sound.target</literal> (for a full list of special targets see <citerefentry><refentrytitle>systemd.special</refentrytitle> <manvolnum>7</manvolnum></citerefentry>). The dependencies of a target can be listed either within the target file (in the <literal>Requires=</literal> line), or using a symbolic link to a service file in the <literal>/lib/systemd/system/<replaceable>targetname</replaceable>.target.wants/</literal> directory. For instance, <filename>/etc/systemd/system/printer.target.wants/</filename> contains a link to <filename>/lib/systemd/system/cups.service</filename>; systemd will therefore ensure CUPS is running in order to reach <literal>printer.target</literal>."
308 msgstr "Un « fichier <foreignphrase>target</foreignphrase> » de systemd décrit un état « cible » du système, dans lequel un certain nombre de services sont réputés être fonctionnels. On peut le concevoir comme l'équivalent d'un « niveau d'exécution » <foreignphrase>(runlevel)</foreignphrase> de l'ancien système. Une de ces cibles est <literal>local-fs.target</literal> ; lorsqu'elle est atteinte, le reste du système peut considérer que tous les systèmes de fichiers locaux sont montés et accessibles. Parmi les autres cibles existantes, citons <literal>network-online.target</literal> (« réseau en ligne ») et <literal>sound.target</literal> (« son »). Les dépendances d'une cible peuvent être listées soit dans le fichier <foreignphrase>target</foreignphrase> lui-même (sur la ligne <literal>Requires=</literal>), soit en créant un lien symbolique vers un fichier service dans le répertoire <literal>/lib/systemd/system/<replaceable>nom-de-la-cible</replaceable>.target.wants/</literal>. Ainsi, <filename>/etc/systemd/system/printer.target.wants/</filename> contient un lien vers <filename>/lib/systemd/system/cups.service</filename> ; systemd s'assurera donc que CUPS soit bien démarré pour atteindre la cible <literal>printer.target</literal>."
309
310 msgid "Since unit files are declarative rather than scripts or programs, they cannot be run directly, and they are only interpreted by systemd; several utilities therefore allow the administrator to interact with systemd and control the state of the system and of each component."
311 msgstr "Puisque les fichiers de systemd ne sont pas des scripts ou des programmes, ils ne peuvent être exécutés directement : ils doivent être interprétés par systemd. C'est pourquoi l'administrateur dispose de plusieurs utilitaires pour interagir avec systemd, et contrôler l'état du système et de chacun de ses composants."
312
313 msgid "<primary><command>systemd</command></primary><secondary><command>systemctl</command></secondary><see><command>systemctl</command></see>"
314 msgstr ""
315
316 #, fuzzy
317 #| msgid "<primary>owner</primary><secondary>user</secondary>"
318 msgid "<primary><command>systemctl</command></primary><secondary><literal>status</literal></secondary>"
319 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
320
321 msgid "The first such utility is <command>systemctl</command>. When run without any arguments, it lists all the unit files known to systemd (except those that have been disabled), as well as their status. <command>systemctl status</command> gives a better view of the services, as well as the related processes. If given the name of a service (as in <command>systemctl status ntp.service</command>), it returns even more details, as well as the last few log lines related to the service (more on that later)."
322 msgstr "Le premier de ces outils est <command>systemctl</command>. Lorsqu'il est exécuté sans paramètres, il liste toutes les « unités » connues de systemd (à l'exception de celles qui ont été désactivées), ainsi que leur état. <command>systemctl status</command> donne une meilleure vue des services, et des processus associés. En lui passant un nom de service (comme dans <command>systemctl status ntp.service</command>), il renvoie encore plus de détails, ainsi que les dernières lignes de log en rapport avec le service (nous reviendrons là dessus plus loin)."
323
324 #, fuzzy
325 #| msgid "<primary>service</primary><secondary>restart</secondary>"
326 msgid "<primary><command>systemctl</command></primary><secondary><literal>start</literal></secondary>"
327 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
328
329 #, fuzzy
330 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
331 msgid "<primary><command>systemctl</command></primary><secondary><literal>stop</literal></secondary>"
332 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
333
334 #, fuzzy
335 #| msgid "<primary>modules</primary><secondary>kernel modules</secondary>"
336 msgid "<primary><command>systemctl</command></primary><secondary><literal>reload</literal></secondary>"
337 msgstr "<primary>modules</primary><secondary>du noyau</secondary>"
338
339 #, fuzzy
340 #| msgid "<primary>service</primary><secondary>restart</secondary>"
341 msgid "<primary><command>systemctl</command></primary><secondary><literal>restart</literal></secondary>"
342 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
343
344 msgid "Starting a service by hand is a simple matter of running <command>systemctl start <replaceable>servicename</replaceable>.service</command>. As one can guess, stopping the service is done with <command>systemctl stop <replaceable>servicename</replaceable>.service</command>; other subcommands include <command>reload</command> and <command>restart</command>."
345 msgstr "Démarrer un service manuellement se fait simplement avec <command>systemctl start <replaceable>nom-de-service</replaceable>.service</command>. Inversement et sans surprise, arrêter un service se fait avec <command>systemctl stop <replaceable>nom-de-service</replaceable>.service</command> ; d'autres sous-commandes existent, comme <command>reload</command> (« recharger ») et <command>restart</command> (« redémarrer »)."
346
347 #, fuzzy
348 #| msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
349 msgid "<primary><command>systemctl</command></primary><secondary><literal>enable</literal></secondary>"
350 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
351
352 #, fuzzy
353 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
354 msgid "<primary><command>systemctl</command></primary><secondary><literal>disable</literal></secondary>"
355 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
356
357 #, fuzzy
358 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
359 msgid "<primary><command>systemctl</command></primary><secondary><literal>is-enabled</literal></secondary>"
360 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
361
362 msgid "To control whether a service is active (i.e. whether it will get started automatically on boot), use <command>systemctl enable <replaceable>servicename</replaceable>.service</command> (or <command>disable</command>). <command>is-enabled</command> allows checking the status of the service."
363 msgstr "Pour activer un service (autrement dit pour qu'il soit lancé automatiquement au démarrage de l'ordinateur), il convient de faire <command>systemctl enable <replaceable>nom-du-service</replaceable>.service</command> (ou <command>disable</command> pour le désactiver). La sous-commande <command>is-enabled</command> permet de vérifier l'état d'activation du service."
364
365 msgid "<primary><command>systemd</command></primary><secondary><command>journald</command></secondary><see><command>journald</command></see>"
366 msgstr ""
367
368 msgid "<primary><command>systemd</command></primary><secondary><command>journalctl</command></secondary><see><command>journalctl</command></see>"
369 msgstr ""
370
371 #, fuzzy
372 #| msgid "<primary><command>atd</command></primary>"
373 msgid "<primary><command>journald</command></primary>"
374 msgstr "<primary><command>atd</command></primary>"
375
376 #, fuzzy
377 #| msgid "<primary><command>rsyslogd</command></primary>"
378 msgid "<primary><command>syslogd</command></primary>"
379 msgstr "<primary><command>rsyslogd</command></primary>"
380
381 #, fuzzy
382 #| msgid "<primary><command>at</command></primary>"
383 msgid "<primary><command>journalctl</command></primary>"
384 msgstr "<primary><command>at</command></primary>"
385
386 #, fuzzy
387 #| msgid "An interesting feature of systemd is that it includes a logging component named <command>journald</command>. It comes as a complement to more traditional logging systems such as <command>syslogd</command>, but it adds interesting features such as a formal link between a service and the messages it generates, and the ability to capture error messages generated by its initialisation sequence. The messages can be displayed later on, with a little help from the <command>journalctl</command> command. Without any arguments, it simply spews all log messages that occurred since system boot; it will rarely be used in such a manner. Most of the time, it will be used with a service identifier:"
388 msgid "An interesting feature of systemd is that it includes a logging component named <command>journald</command>. It comes as a complement to more traditional logging systems such as <command>syslogd</command>, but it adds interesting features such as a formal link between a service and the messages it generates, and the ability to capture error messages generated by its initialization sequence. The messages can be displayed later on, with a little help from the <command>journalctl</command> command. Without any arguments, it simply spews all log messages that occurred since system boot; it will rarely be used in such a manner. Most of the time, it will be used with a service identifier:"
389 msgstr "Une autre particularité de systemd est son système de journalisation – <command>journald</command>. Il peut être employé en complément des outils de journalisation traditionnels comme <command>syslogd</command> : il rajoute des fonctionnalités intéressantes comme l'association d'un message au service qui l'a généré, et la capacité de capturer les messages émis sur la sortie d'erreur des processus gérés. Les messages peuvent être consultés après coup, grâce à la commande <command>journalctl</command>. Sans arguments, elle affiche simplement tous les messages enregistrés depuis le démarrage du système ; on ne l'emploie que rarement de cette manière. La plupart du temps, on lui communique un identifiant de service dont on veut voir les messages :"
390
391 msgid ""
392 "<computeroutput># </computeroutput><userinput>journalctl -u ssh.service\n"
393 "</userinput><computeroutput>-- Logs begin at Tue 2015-03-31 10:08:49 CEST, end at Tue 2015-03-31 17:06:02 CEST. --\n"
394 "Mar 31 10:08:55 mirtuel sshd[430]: Server listening on 0.0.0.0 port 22.\n"
395 "Mar 31 10:08:55 mirtuel sshd[430]: Server listening on :: port 22.\n"
396 "Mar 31 10:09:00 mirtuel sshd[430]: Received SIGHUP; restarting.\n"
397 "Mar 31 10:09:00 mirtuel sshd[430]: Server listening on 0.0.0.0 port 22.\n"
398 "Mar 31 10:09:00 mirtuel sshd[430]: Server listening on :: port 22.\n"
399 "Mar 31 10:09:32 mirtuel sshd[1151]: Accepted password for roland from 192.168.1.129 port 53394 ssh2\n"
400 "Mar 31 10:09:32 mirtuel sshd[1151]: pam_unix(sshd:session): session opened for user roland by (uid=0)\n"
401 "</computeroutput>"
402 msgstr ""
403 "<computeroutput># </computeroutput><userinput>journalctl -u ssh.service\n"
404 "</userinput><computeroutput>-- Logs begin at mar. 2015-03-31 10:08:49 CEST, end at mar. 2015-03-31 17:06:02 CEST. --\n"
405 "Mar 31 10:08:55 mirtuel sshd[430]: Server listening on 0.0.0.0 port 22.\n"
406 "Mar 31 10:08:55 mirtuel sshd[430]: Server listening on :: port 22.\n"
407 "Mar 31 10:09:00 mirtuel sshd[430]: Received SIGHUP; restarting.\n"
408 "Mar 31 10:09:00 mirtuel sshd[430]: Server listening on 0.0.0.0 port 22.\n"
409 "Mar 31 10:09:00 mirtuel sshd[430]: Server listening on :: port 22.\n"
410 "Mar 31 10:09:32 mirtuel sshd[1151]: Accepted password for roland from 192.168.1.129 port 53394 ssh2\n"
411 "Mar 31 10:09:32 mirtuel sshd[1151]: pam_unix(sshd:session): session opened for user roland by (uid=0)\n"
412 "</computeroutput>"
413
414 msgid "Another useful command-line flag is <command>-f</command>, which instructs <command>journalctl</command> to keep displaying new messages as they are emitted (much in the manner of <command>tail -f <replaceable>file</replaceable></command>)."
415 msgstr "Une autre option très utile est <command>-f</command>, qui demande à <command>journalctl</command> d'afficher les nouveaux messages au fur et à mesure de leur émission (de manière similaire à ce que réalise <command>tail -f <replaceable>fichier</replaceable></command>)."
416
417 msgid "If a service doesn't seem to be working as expected, the first step to solve the problem is to check that the service is actually running with <command>systemctl status</command>; if it is not, and the messages given by the first command are not enough to diagnose the problem, check the logs gathered by journald about that service. For instance, assume the SSH server doesn't work:"
418 msgstr "Lorsqu'un service n'a pas l'air de fonctionner correctement, la première étape pour résoudre le problème est de vérifier si le service est lancé avec <command>systemctl status</command> ; si ce n'est pas le cas, et si les messages affichés par cette première commande ne suffisent pas à identifier le problème, il convient alors de consulter les messages que journald a collecté au sujet de ce service. Prenons le cas d'un serveur SSH qui ne fonctionne pas :"
419
420 msgid ""
421 "<computeroutput># </computeroutput><userinput>systemctl status ssh.service\n"
422 "</userinput><computeroutput>● ssh.service - OpenBSD Secure Shell server\n"
423 " Loaded: loaded (/lib/systemd/system/ssh.service; enabled)\n"
424 " Active: failed (Result: start-limit) since Tue 2015-03-31 17:30:36 CEST; 1s ago\n"
425 " Process: 1023 ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS)\n"
426 " Process: 1188 ExecStart=/usr/sbin/sshd -D $SSHD_OPTS (code=exited, status=255)\n"
427 " Main PID: 1188 (code=exited, status=255)\n"
428 "\n"
429 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
430 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
431 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service start request repeated too quickly, refusing to start.\n"
432 "Mar 31 17:30:36 mirtuel systemd[1]: Failed to start OpenBSD Secure Shell server.\n"
433 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
434 "# </computeroutput><userinput>journalctl -u ssh.service\n"
435 "</userinput><computeroutput>-- Logs begin at Tue 2015-03-31 17:29:27 CEST, end at Tue 2015-03-31 17:30:36 CEST. --\n"
436 "Mar 31 17:29:27 mirtuel sshd[424]: Server listening on 0.0.0.0 port 22.\n"
437 "Mar 31 17:29:27 mirtuel sshd[424]: Server listening on :: port 22.\n"
438 "Mar 31 17:29:29 mirtuel sshd[424]: Received SIGHUP; restarting.\n"
439 "Mar 31 17:29:29 mirtuel sshd[424]: Server listening on 0.0.0.0 port 22.\n"
440 "Mar 31 17:29:29 mirtuel sshd[424]: Server listening on :: port 22.\n"
441 "Mar 31 17:30:10 mirtuel sshd[1147]: Accepted password for roland from 192.168.1.129 port 38742 ssh2\n"
442 "Mar 31 17:30:10 mirtuel sshd[1147]: pam_unix(sshd:session): session opened for user roland by (uid=0)\n"
443 "Mar 31 17:30:35 mirtuel sshd[1180]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
444 "Mar 31 17:30:35 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
445 "Mar 31 17:30:35 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
446 "Mar 31 17:30:35 mirtuel sshd[1182]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
447 "Mar 31 17:30:35 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
448 "Mar 31 17:30:35 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
449 "Mar 31 17:30:35 mirtuel sshd[1184]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
450 "Mar 31 17:30:35 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
451 "Mar 31 17:30:35 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
452 "Mar 31 17:30:36 mirtuel sshd[1186]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
453 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
454 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
455 "Mar 31 17:30:36 mirtuel sshd[1188]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
456 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
457 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
458 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service start request repeated too quickly, refusing to start.\n"
459 "Mar 31 17:30:36 mirtuel systemd[1]: Failed to start OpenBSD Secure Shell server.\n"
460 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
461 "# </computeroutput><userinput>vi /etc/ssh/sshd_config\n"
462 "</userinput><computeroutput># </computeroutput><userinput>systemctl start ssh.service\n"
463 "</userinput><computeroutput># </computeroutput><userinput>systemctl status ssh.service\n"
464 "</userinput><computeroutput>● ssh.service - OpenBSD Secure Shell server\n"
465 " Loaded: loaded (/lib/systemd/system/ssh.service; enabled)\n"
466 " Active: active (running) since Tue 2015-03-31 17:31:09 CEST; 2s ago\n"
467 " Process: 1023 ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS)\n"
468 " Main PID: 1222 (sshd)\n"
469 " CGroup: /system.slice/ssh.service\n"
470 " └─1222 /usr/sbin/sshd -D\n"
471 "# </computeroutput>"
472 msgstr ""
473 "<computeroutput># </computeroutput><userinput>systemctl status ssh.service\n"
474 "</userinput><computeroutput>● ssh.service - OpenBSD Secure Shell server\n"
475 " Loaded: loaded (/lib/systemd/system/ssh.service; enabled)\n"
476 " Active: failed (Result: start-limit) since mar. 2015-03-31 17:30:36 CEST; 1s ago\n"
477 " Process: 1023 ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS)\n"
478 " Process: 1188 ExecStart=/usr/sbin/sshd -D $SSHD_OPTS (code=exited, status=255)\n"
479 " Main PID: 1188 (code=exited, status=255)\n"
480 "\n"
481 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
482 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
483 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service start request repeated too quickly, refusing to start.\n"
484 "Mar 31 17:30:36 mirtuel systemd[1]: Failed to start OpenBSD Secure Shell server.\n"
485 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
486 "# </computeroutput><userinput>journalctl -u ssh.service\n"
487 "</userinput><computeroutput>-- Logs begin at mar. 2015-03-31 17:29:27 CEST, end at mar. 2015-03-31 17:30:36 CEST. --\n"
488 "Mar 31 17:29:27 mirtuel sshd[424]: Server listening on 0.0.0.0 port 22.\n"
489 "Mar 31 17:29:27 mirtuel sshd[424]: Server listening on :: port 22.\n"
490 "Mar 31 17:29:29 mirtuel sshd[424]: Received SIGHUP; restarting.\n"
491 "Mar 31 17:29:29 mirtuel sshd[424]: Server listening on 0.0.0.0 port 22.\n"
492 "Mar 31 17:29:29 mirtuel sshd[424]: Server listening on :: port 22.\n"
493 "Mar 31 17:30:10 mirtuel sshd[1147]: Accepted password for roland from 192.168.1.129 port 38742 ssh2\n"
494 "Mar 31 17:30:10 mirtuel sshd[1147]: pam_unix(sshd:session): session opened for user roland by (uid=0)\n"
495 "Mar 31 17:30:35 mirtuel sshd[1180]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
496 "Mar 31 17:30:35 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
497 "Mar 31 17:30:35 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
498 "Mar 31 17:30:35 mirtuel sshd[1182]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
499 "Mar 31 17:30:35 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
500 "Mar 31 17:30:35 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
501 "Mar 31 17:30:35 mirtuel sshd[1184]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
502 "Mar 31 17:30:35 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
503 "Mar 31 17:30:35 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
504 "Mar 31 17:30:36 mirtuel sshd[1186]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
505 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
506 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
507 "Mar 31 17:30:36 mirtuel sshd[1188]: /etc/ssh/sshd_config line 28: unsupported option \"yess\".\n"
508 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service: main process exited, code=exited, status=255/n/a\n"
509 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
510 "Mar 31 17:30:36 mirtuel systemd[1]: ssh.service start request repeated too quickly, refusing to start.\n"
511 "Mar 31 17:30:36 mirtuel systemd[1]: Failed to start OpenBSD Secure Shell server.\n"
512 "Mar 31 17:30:36 mirtuel systemd[1]: Unit ssh.service entered failed state.\n"
513 "# </computeroutput><userinput>vi /etc/ssh/sshd_config\n"
514 "</userinput><computeroutput># </computeroutput><userinput>systemctl start ssh.service\n"
515 "</userinput><computeroutput># </computeroutput><userinput>systemctl status ssh.service\n"
516 "</userinput><computeroutput>● ssh.service - OpenBSD Secure Shell server\n"
517 " Loaded: loaded (/lib/systemd/system/ssh.service; enabled)\n"
518 " Active: active (running) since mar. 2015-03-31 17:31:09 CEST; 2s ago\n"
519 " Process: 1023 ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS)\n"
520 " Main PID: 1222 (sshd)\n"
521 " CGroup: /system.slice/ssh.service\n"
522 " └─1222 /usr/sbin/sshd -D\n"
523 "# </computeroutput>"
524
525 msgid "After checking the status of the service (failed), we went on to check the logs; they indicate an error in the configuration file. After editing the configuration file and fixing the error, we restart the service, then verify that it is indeed running."
526 msgstr "Après avoir vérifié l'état du service (<foreignphrase>failed</foreignphrase>, en échec), nous avons consulté les messages du journal ; ils indiquaient une erreur dans le fichier de configuration. Après avoir corrigé ce dernier, nous avons redémarré le service et nous avons vérifié qu'il fonctionnait pour de bon."
527
528 msgid "<emphasis>GOING FURTHER</emphasis> Other types of unit files"
529 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> D'autres sortes de fichiers systemd <foreignphrase>(unit files)</foreignphrase>"
530
531 msgid "We have only described the most basic of systemd's capabilities in this section. It offers many other interesting features; we will only list a few here:"
532 msgstr "Dans cette section nous avons découvert les facettes les plus importantes de systemd. Mais il dispose de nombreuses autres fonctionnalités ; nous n'en listerons que quelques-unes ici:"
533
534 #, fuzzy
535 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
536 msgid "<primary><command>systemd</command></primary><secondary><filename>.socket</filename> file</secondary>"
537 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
538
539 #, fuzzy
540 #| msgid "socket activation: a “socket” unit file can be used to describe a network or Unix socket managed by systemd; this means that the socket will be created by systemd, and the actual service may be started on demand when an actual connection attempt comes. This roughly replicates the feature set of <command>inetd</command>. See <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>."
541 msgid "socket activation: a “socket” unit file can be used to describe a network or Unix socket managed by systemd; this means that the socket will be created by systemd, and the actual service may be started on demand when an actual connection attempt comes. This roughly replicates the feature set of <command>inetd</command>. See <citerefentry><refentrytitle>systemd.socket</refentrytitle> <manvolnum>5</manvolnum></citerefentry>."
542 msgstr "activation de socket : un fichier « socket » décrit une socket réseau ou Unix gérée par systemd ; concrètement la socket est créée par systemd, et le service sous-jacent peut être démarré à la demande lorsqu'une demande de connexion est reçue. Cela reprend approximativement les fonctionnalités de <command>inetd</command>. Voir <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>."
543
544 #, fuzzy
545 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
546 msgid "<primary><command>systemd</command></primary><secondary><filename>.timer</filename> file</secondary>"
547 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
548
549 #, fuzzy
550 #| msgid "timers: a “timer” unit file describes events that occur with a fixed frequency or on specific times; when a service is linked to such a timer, the corresponding task will be executed whenever the timer fires. This allows replicating part of the <command>cron</command> features. See <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>."
551 msgid "timers: a “timer” unit file describes events that occur with a fixed frequency or on specific times; when a service is linked to such a timer, the corresponding task will be executed whenever the timer fires. This allows replicating part of the <command>cron</command> features. See <citerefentry><refentrytitle>systemd.timer</refentrytitle> <manvolnum>5</manvolnum></citerefentry>."
552 msgstr "minuterie : un fichier « timer » décrit un événement qui se reproduit à un intervalle régulier ou à un horaire particulier ; lorsqu'un service est lié à une minuterie, la tâche correspondante est exécutée chaque fois que la minuterie se déclenche. Cette fonctionnalité est similaire à celle offerte par <command>cron</command>. Voir <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>."
553
554 #, fuzzy
555 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
556 msgid "<primary><command>systemd</command></primary><secondary><filename>.network</filename> file</secondary>"
557 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
558
559 #, fuzzy
560 #| msgid "network: a “network“ unit file describes a network interface, which allows configuring such interfaces as well as expressing that a service depends on one particular interface being up."
561 msgid "network: a “network“ unit file describes a network interface, which allows configuring such interfaces as well as expressing that a service depends on one particular interface being up. See <citerefentry><refentrytitle>systemd.network</refentrytitle> <manvolnum>5</manvolnum></citerefentry>."
562 msgstr "réseau : un fichier « network » décrit une interface réseau, ce qui permet de configurer ces interfaces et d'exprimer le fait qu'un service dépend de la disponibilité d'une interface particulière."
563
564 msgid "The System V init system"
565 msgstr "Le système d'initialisation System V"
566
567 #, fuzzy
568 #| msgid "The System V init system (which we'll call init for brevity) executes several processes, following instructions from the <filename>/etc/inittab</filename> file. The first program that is executed (which corresponds to the <emphasis>sysinit</emphasis> step) is <command>/etc/init.d/rcS</command>, a script that executes all of the programs in the <filename>/etc/rcS.d/</filename> directory. <indexterm><primary><filename>/etc/init.d/rcS</filename></primary></indexterm> <indexterm><primary><filename>rcS</filename></primary></indexterm> <indexterm><primary><filename>/etc/init.d/rcS.d/</filename></primary></indexterm> <indexterm><primary><filename>rcS.d</filename></primary></indexterm>"
569 msgid "The System V init system (which we'll call init for brevity) executes several processes, following instructions from the <filename>/etc/inittab</filename> file. The first program that is executed (which corresponds to the <emphasis>sysinit</emphasis> step) is <command>/etc/init.d/rcS</command>, a script that executes all of the programs in the <filename>/etc/rcS.d/</filename> directory."
570 msgstr "Le système d'initialisation System V exécute tout un ensemble de processus en suivant les indications du fichier <filename>/etc/inittab</filename>. Le premier programme exécuté (correspondant à l'étape <emphasis>sysinit</emphasis>) est <command>/etc/init.d/rcS</command>, script qui exécute tous les programmes du répertoire <filename>/etc/rcS.d/</filename>. <indexterm><primary><filename>/etc/init.d/rcS</filename></primary></indexterm> <indexterm><primary><filename>rcS</filename></primary></indexterm> <indexterm><primary><filename>/etc/init.d/rcS.d/</filename></primary></indexterm> <indexterm><primary><filename>rcS.d</filename></primary></indexterm>"
571
572 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/init.d/rcS</filename></secondary><seealso><emphasis role=\"pkg\">sysv-rc</emphasis></seealso>"
573 msgstr ""
574
575 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/rcS.d/</filename></secondary><seealso><emphasis role=\"pkg\">sysv-rc</emphasis></seealso>"
576 msgstr ""
577
578 #, fuzzy
579 #| msgid "<primary><filename>crontab</filename></primary>"
580 msgid "<primary><filename>rcS</filename></primary>"
581 msgstr "<primary><filename>crontab</filename></primary>"
582
583 #, fuzzy
584 #| msgid "<primary><filename>crontab</filename></primary>"
585 msgid "<primary><filename>rcS.d</filename></primary>"
586 msgstr "<primary><filename>crontab</filename></primary>"
587
588 msgid "Among these, you will find successively programs in charge of:"
589 msgstr "Parmi ceux-ci, on trouve successivement :"
590
591 msgid "configuring the console's keyboard;"
592 msgstr "la configuration du clavier de la console ;"
593
594 msgid "loading drivers: most of the kernel modules are loaded by the kernel itself as the hardware is detected; extra drivers are then loaded automatically when the corresponding modules are listed in <filename>/etc/modules</filename>;"
595 msgstr "le chargement des pilotes : la plupart des modules noyau sont chargés par le noyau lui-même en fonction du matériel détecté ; certains pilotes peuvent ensuite être systématiquement chargés, les modules correspondants doivent être listés dans <filename>/etc/modules</filename> ;"
596
597 #, fuzzy
598 #| msgid "<primary>modules</primary><secondary>kernel modules</secondary>"
599 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/modules</filename></secondary>"
600 msgstr "<primary>modules</primary><secondary>du noyau</secondary>"
601
602 msgid "checking the integrity of filesystems;"
603 msgstr "la vérification de l'intégrité des systèmes de fichiers ;"
604
605 msgid "mounting local partitions;"
606 msgstr "le montage des partitions locales ;"
607
608 msgid "configuring the network;"
609 msgstr "la configuration du réseau ;"
610
611 msgid "mounting network filesystems (NFS)."
612 msgstr "le montage des systèmes de fichiers distants (NFS)."
613
614 msgid "<emphasis>BACK TO BASICS</emphasis> Kernel modules and options"
615 msgstr "<emphasis>B.A.-BA</emphasis> Modules du noyau et options"
616
617 msgid "<primary>modules</primary><secondary>kernel modules</secondary>"
618 msgstr "<primary>modules</primary><secondary>du noyau</secondary>"
619
620 #, fuzzy
621 #| msgid "<primary>user</primary><secondary>owner</secondary>"
622 msgid "<primary>kernel</primary><secondary>modules</secondary>"
623 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
624
625 msgid "<primary>kernel</primary><secondary>modules</secondary><tertiary>load</tertiary><seealso><command>modprobe</command></seealso>"
626 msgstr ""
627
628 msgid "<primary>kernel</primary><secondary>modules</secondary><tertiary>options</tertiary><seealso><command>modinfo</command></seealso>"
629 msgstr ""
630
631 #, fuzzy
632 #| msgid "<primary>files</primary><secondary>log files</secondary>"
633 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/modprobe.d</filename></secondary>"
634 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
635
636 #, fuzzy
637 #| msgid "<primary>modules</primary><secondary>kernel modules</secondary>"
638 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/modules-load.d/</filename></secondary>"
639 msgstr "<primary>modules</primary><secondary>du noyau</secondary>"
640
641 #, fuzzy
642 #| msgid "Kernel modules also have options that can be configured by putting some files in <filename>/etc/modprobe.d/</filename>. These options are defined with directives like this: <literal>options <replaceable>module-name</replaceable> <replaceable>option-name</replaceable>=<replaceable>option-value</replaceable></literal>. Several options can be specified with a single directive if necessary."
643 msgid "You have already learned that kernel modules can be loaded during the start of the system by adding them to <filename>/etc/modules</filename> or a file below <filename>/etc/modules-load.d/</filename>. But modules can also have options that can be configured by putting some files in <filename>/etc/modprobe.d/</filename>. These options are defined with directives like this: <literal>options <replaceable>module-name</replaceable> <replaceable>option-name</replaceable>=<replaceable>option-value</replaceable></literal>. Several options can be specified with a single directive if necessary."
644 msgstr "Les modules du noyau disposent eux aussi d'options qu'on peut paramétrer en plaçant des fichiers dans <filename>/etc/modprobe.d/</filename>. Les options sont définies à l'aide de directives <literal>options <replaceable>nom-du-module</replaceable> <replaceable>nom-option</replaceable>=<replaceable>valeur-option</replaceable></literal>. Plusieurs options peuvent être spécifiées avec une seule directive si nécessaire."
645
646 #, fuzzy
647 #| msgid "These configuration files are intended for <command>modprobe</command> — the program that loads a kernel module with its dependencies (modules can indeed call other modules). This program is provided by the <emphasis role=\"pkg\">kmod</emphasis> package."
648 msgid "These configuration files are intended for <command>modprobe</command> — the program that loads a kernel module with its dependencies (modules can indeed call other modules). To list all options of a module use the <command>modinfo -p <replaceable>module</replaceable></command> command. Both programs are provided by the <emphasis role=\"pkg\">kmod</emphasis> package together with other tools to handle modules."
649 msgstr "Ces fichiers de configuration sont destinés à <command>modprobe</command> — le programme permettant de charger un module noyau avec ses dépendances (les modules peuvent en effet faire appel à d'autres modules). Ce dernier est fourni par le paquet <emphasis role=\"pkg\">kmod</emphasis>."
650
651 msgid "<primary><command>modprobe</command></primary>"
652 msgstr "<primary><command>modprobe</command></primary>"
653
654 #, fuzzy
655 #| msgid "<primary><command>diff</command></primary>"
656 msgid "<primary><command>modinfo</command></primary>"
657 msgstr "<primary><command>diff</command></primary>"
658
659 msgid "<primary><emphasis role=\"pkg\">kmod</emphasis></primary>"
660 msgstr "<primary><emphasis role=\"pkg\">kmod</emphasis></primary>"
661
662 msgid "Having learned about systemd, services and targets can use the <filename>modprobe@<replaceable>module</replaceable>.service</filename> to load kernel modules they depend on."
663 msgstr ""
664
665 #, fuzzy
666 #| msgid "<primary>server</primary><secondary>client/server architecture</secondary>"
667 msgid "<primary>service</primary><secondary><filename>modprobe@<replaceable>module</replaceable>.service</filename></secondary>"
668 msgstr "<primary>serveur</primary><secondary>architecture client/serveur</secondary>"
669
670 #, fuzzy
671 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
672 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/init.d/rc</filename></secondary>"
673 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
674
675 #, fuzzy
676 #| msgid "<primary>files</primary><secondary>log files</secondary>"
677 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/rcX.d/</filename></secondary>"
678 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
679
680 #, fuzzy
681 #| msgid "<primary><command>inetd</command></primary>"
682 msgid "<primary><command>insserv</command></primary>"
683 msgstr "<primary><command>inetd</command></primary>"
684
685 msgid "After this stage, <command>init</command> takes over and starts the programs enabled in the default runlevel (which is usually runlevel 2). It executes <command>/etc/init.d/rc 2</command>, a script that starts all services which are listed in <filename>/etc/rc2.d/</filename> and whose names start with the “S” letter. The two-figures number that follows had historically been used to define the order in which services had to be started, but nowadays the default boot system uses <command>insserv</command>, which schedules everything automatically based on the scripts' dependencies. Each boot script thus declares the conditions that must be met to start or stop the service (for example, if it must start before or after another service); <command>init</command> then launches them in the order that meets these conditions. The static numbering of scripts is therefore no longer taken into consideration (but they must always have a name beginning with “S” followed by two digits and the actual name of the script used for the dependencies). Generally, base services (such as logging with <command>rsyslog</command>, or port assignment with <command>portmap</command>) are started first, followed by standard services and the graphical interface (<command>gdm3</command>)."
686 msgstr "Après cette phase, <command>init</command> reprend la main et démarre les programmes associés au niveau d'exécution <foreignphrase>(runlevel)</foreignphrase> normal, soit par défaut le niveau 2. Il exécute <command>/etc/init.d/rc 2</command>, script qui démarre tous les services donnés du répertoire <filename>/etc/rc2.d/</filename> débutant par la lettre « S ». Le nombre (à deux chiffres) qui suit servait historiquement à classer les services pour les démarrer dans le bon ordre, mais de nos jours le système de démarrage par défaut utilise <command>insserv</command>, un système de démarrage où l'ordonnancement se fait en fonction des dépendances entre scripts. Chaque script de démarrage déclare ainsi les contraintes qui s'appliquent à lui (par exemple, s'il doit démarrer avant ou après tel autre service) ; <command>init</command> les lance alors dans un ordre qui satisfait les contraintes. La numérotation statique des scripts n'est donc plus prise en compte (mais ils doivent toujours s'appeler d'un nom composé d'un « S » suivi de deux caractères, suivis à leur tour du véritable nom du script utilisé pour les dépendances). D'une manière générale, les services de base (comme le service de collecte des journaux, <command>rsyslog</command>, ou celui d'attribution des ports, <command>portmap</command>) sont démarrés en premier, suivis par les services standards et l'interface graphique (<command>gdm3</command>)."
687
688 # Marilyne reviewed up to here
689 msgid "This dependency-based boot system makes it possible to automate re-numbering, which could be rather tedious if it had to be done manually, and it limits the risks of human error, since scheduling is conducted according to the parameters that are indicated. Another benefit is that services can be started in parallel when they are independent from one another, which can accelerate the boot process."
690 msgstr "Ce système de démarrage par dépendances permet d'automatiser des renumérotations qui pourraient s'avérer fastidieuses si elles devaient être faites manuellement et il prévient les erreurs humaines, puisque l'ordonnancement se fait en fonction des contraintes exprimées. Il présente également l'avantage supplémentaire de permettre le démarrage de plusieurs services en parallèle, si plusieurs scripts sont indépendants entre eux, ce qui peut accélérer la séquence de démarrage."
691
692 # TODO: INTEGRATE ALTERNATE STRING: <primary>niveau d'exécution</primary>
693 msgid "<primary>runlevel</primary>"
694 msgstr "<primary><foreignphrase>runlevel</foreignphrase></primary>"
695
696 msgid "<primary>level, runlevel</primary>"
697 msgstr "<primary>exécution</primary><secondary>niveau</secondary>"
698
699 #, fuzzy
700 #| msgid "<primary><command>telnet</command></primary>"
701 msgid "<primary><command>telinit</command></primary>"
702 msgstr "<primary><command>telnet</command></primary>"
703
704 msgid "<command>init</command> distinguishes several runlevels, so it can switch from one to another with the <command>telinit <replaceable>new-level</replaceable></command> command. Immediately, <command>init</command> executes <command>/etc/init.d/rc</command> again with the new runlevel. This script will then start the missing services and stop those that are no longer desired. To do this, it refers to the content of the <filename>/etc/rc<replaceable>X</replaceable>.d</filename> (where <replaceable>X</replaceable> represents the new runlevel). Scripts starting with “S” (as in “Start”) are services to be started; those starting with “K” (as in “Kill”) are the services to be stopped. The script does not start any service that was already active in the previous runlevel."
705 msgstr "<command>init</command> distingue plusieurs niveaux d'exécution car il peut basculer de l'un à l'autre par la commande <command>telinit <replaceable>nouveau-niveau</replaceable></command>. Dès son invocation, <command>init</command> exécute à nouveau <command>/etc/init.d/rc</command> avec le nouveau niveau d'exécution désiré, script qui démarre à son tour les services manquants et arrête ceux qui ne sont plus souhaités. Pour cela, il se réfère au contenu du répertoire <filename>/etc/rc<replaceable>X</replaceable>.d</filename> (où <replaceable>X</replaceable> représente le nouveau niveau d'exécution). Les scripts débutant par « S » (comme <foreignphrase>Start</foreignphrase>) sont des services à démarrer, ceux débutant par « K » (comme <foreignphrase>Kill</foreignphrase>) sont des services à stopper. Le script évite de redémarrer tout service déjà actif dans le niveau d'exécution précédent."
706
707 #, fuzzy
708 #| msgid "<primary>service</primary><secondary>restart</secondary>"
709 msgid "<primary>System V init</primary><secondary>runlevels</secondary>"
710 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
711
712 msgid "By default, System V init in Debian uses four different runlevels:"
713 msgstr "Dans Debian, le système d'initialisation System V n'utilise par défaut que quatre <foreignphrase>runlevels</foreignphrase> différents|:"
714
715 msgid "Level 0 is only used temporarily, while the computer is powering down. As such, it only contains many “K” scripts."
716 msgstr "Le niveau 0 n'est utilisé que de manière transitoire, lors de la phase d'extinction de l'ordinateur. Il contient donc de nombreux scripts « K »."
717
718 msgid "Level 1, also known as single-user mode, corresponds to the system in degraded mode; it includes only basic services, and is intended for maintenance operations where interactions with ordinary users are not desired."
719 msgstr "Le niveau 1, aussi connu sous le nom de <foreignphrase>single-user</foreignphrase>, correspond au système en mode dégradé ; il ne contient que les services de base et est prévu pour les opérations de maintenance en dehors de l'interaction des utilisateurs."
720
721 msgid "Level 2 is the level for normal operation, which includes networking services, a graphical interface, user logins, etc."
722 msgstr "Le niveau 2 est le niveau de fonctionnement normal, qui inclut les services réseau, l'interface graphique, les connexions des utilisateurs, etc."
723
724 msgid "Level 6 is similar to level 0, except that it is used during the shutdown phase that precedes a reboot."
725 msgstr "Le niveau 6 est similaire au niveau 0, à ceci près qu'il est utilisé lors de la phase d'extinction qui précède un redémarrage."
726
727 msgid "Other levels exist, especially 3 to 5. By default they are configured to operate the same way as level 2, but the administrator can modify them (by adding or deleting scripts in the corresponding <filename>/etc/rc<replaceable>X</replaceable>.d</filename> directories) to adapt them to particular needs."
728 msgstr "D'autres niveaux existent, notamment de 3 à 5. Ils sont par défaut configurés pour fonctionner de la même manière que le niveau 2, mais l'administrateur peut les modifier (en ajoutant ou supprimant des scripts dans les répertoires <filename>/etc/rc<replaceable>X</replaceable>.d/</filename> correspondants) pour les adapter à un besoin particulier."
729
730 msgid "Boot sequence of a computer running Linux with System V init"
731 msgstr "Étapes du démarrage d'un ordinateur sous Linux avec le système d'initialisation System V"
732
733 msgid "<primary>initialization script</primary>"
734 msgstr "<primary>script d'initialisation</primary>"
735
736 msgid "<primary><command>update-rc.d</command></primary>"
737 msgstr "<primary><command>update-rc.d</command></primary>"
738
739 #, fuzzy
740 #| msgid "<primary><command>cron</command></primary>"
741 msgid "<primary><command>rcconf</command></primary>"
742 msgstr "<primary><command>cron</command></primary>"
743
744 #, fuzzy
745 #| msgid "All the scripts contained in the various <filename>/etc/rc<replaceable>X</replaceable>.d</filename> directories are really only symbolic links — created upon package installation by the <command>update-rc.d</command> program — pointing to the actual scripts which are stored in <filename>/etc/init.d/</filename>. The administrator can fine tune the services available in each runlevel by re-running <command>update-rc.d</command> with adjusted parameters. The <citerefentry><refentrytitle>update-rc.d</refentrytitle><manvolnum>1</manvolnum></citerefentry> manual page describes the syntax in detail. Please note that removing all symbolic links (with the <literal>remove</literal> parameter) is not a good method to disable a service. Instead you should simply configure it to not start in the desired runlevel (while preserving the corresponding calls to stop it in the event that the service runs in the previous runlevel). Since <command>update-rc.d</command> has a somewhat convoluted interface, you may prefer using <command>rcconf</command> (from the <emphasis role=\"pkg\">rcconf</emphasis> package) which provides a more user-friendly interface."
746 msgid "All the scripts contained in the various <filename>/etc/rc<replaceable>X</replaceable>.d</filename> directories are really only symbolic links — created upon package installation by the <command>update-rc.d</command> program — pointing to the actual scripts which are stored in <filename>/etc/init.d/</filename>. The administrator can fine tune the services available in each runlevel by re-running <command>update-rc.d</command> with adjusted parameters. The <citerefentry><refentrytitle>update-rc.d</refentrytitle> <manvolnum>1</manvolnum></citerefentry> manual page describes the syntax in detail. Please note that removing all symbolic links (with the <literal>remove</literal> parameter) is not a good method to disable a service. Instead you should simply configure it to not start in the desired runlevel (while preserving the corresponding calls to stop it in the event that the service runs in the previous runlevel). Since <command>update-rc.d</command> has a somewhat convoluted interface, you may prefer using <command>rcconf</command> (from the <emphasis role=\"pkg\">rcconf</emphasis> package) which provides a more user-friendly interface."
747 msgstr "Tous les scripts contenus dans les différents répertoires <filename>/etc/rc<replaceable>X</replaceable>.d</filename> ne sont que des liens symboliques, créés à l'installation du paquet concerné par le programme <command>update-rc.d</command>, et menant vers les scripts réels, stockés sous <filename>/etc/init.d/</filename>. Pour adapter à sa guise les services à démarrer ou à stopper à chaque niveau d'exécution, l'administrateur exécutera à nouveau le programme <command>update-rc.d</command> en lui fournissant les paramètres adéquats. La page de manuel <citerefentry><refentrytitle>update-rc.d</refentrytitle><manvolnum>1</manvolnum></citerefentry> en détaille la syntaxe précise. Signalons au passage que supprimer tous les liens symboliques (avec le paramètre <literal>remove</literal>) n'est pas la bonne méthode pour désactiver un service. Il faut simplement le configurer pour ne pas démarrer dans les niveaux d'exécution souhaités (tout en conservant les appels correspondants pour l'arrêter au cas où le service tournait dans le niveau d'exécution précédent). L'utilisation d'<command>update-rc.d</command> étant quelque peu alambiquée, on pourra utiliser <command>rcconf</command> (du paquet <emphasis role=\"pkg\">rcconf</emphasis>) pour se voir présenter une interface plus simple à manipuler."
748
749 msgid "<emphasis>DEBIAN POLICY</emphasis> Restarting services"
750 msgstr "<emphasis>CHARTE DEBIAN</emphasis> Redémarrage des services"
751
752 msgid "<primary><command>invoke-rc.d</command></primary>"
753 msgstr "<primary><command>invoke-rc.d</command></primary>"
754
755 msgid "<primary>service</primary><secondary>restart</secondary>"
756 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
757
758 msgid "<primary>restarting services</primary>"
759 msgstr "<primary>redémarrage des services</primary>"
760
761 msgid "The maintainer scripts for Debian packages will sometimes restart certain services to ensure their availability or get them to take certain options into account. The command that controls a service — <command>service <replaceable>service</replaceable> <replaceable>operation</replaceable></command> — doesn't take runlevel into consideration, assumes (wrongly) that the service is currently being used, and may thus initiate incorrect operations (starting a service that was deliberately stopped, or stopping a service that is already stopped, etc.). Debian therefore introduced the <command>invoke-rc.d</command> program: this program must be used by maintainer scripts to run services initialization scripts and it will only execute the necessary commands. Note that, contrary to common usage, the <filename>.d</filename> suffix is used here in a program name, and not in a directory."
762 msgstr "Les scripts de configuration des paquets Debian redémarrent parfois certains services pour assurer leur disponibilité ou leur faire prendre en compte certaines nouvelles options. La commande de manipulation d'un service <command>service <replaceable>service</replaceable> <replaceable>opération</replaceable></command> ne prend pas en compte le niveau d'exécution, suppose (à tort) que le service est actuellement employé et peut donc effectuer des opérations inadéquates (démarrage d'un service volontairement arrêté, ou arrêt d'un service déjà stoppé, etc.). Debian a donc introduit le programme <command>invoke-rc.d</command>, auquel les scripts de configuration doivent recourir pour appeler les scripts d'initialisation des services. Il n'exécutera que les commandes nécessaires. Attention, contrairement à l'usage, le suffixe <filename>.d</filename> est ici employé sur un nom de programme et non pas sur un répertoire."
763
764 msgid "Finally, <command>init</command> starts control programs for various virtual consoles (<command>getty</command>). It displays a prompt, waiting for a username, then executes <command>login <replaceable>user</replaceable></command> to initiate a session."
765 msgstr "Enfin, <command>init</command> démarre les programmes de contrôle des différentes consoles virtuelles (<command>getty</command>). Ils affichent une invite, attendent un nom d'utilisateur, puis exécutent <command>login <replaceable>utilisateur</replaceable></command> pour démarrer une session."
766
767 msgid "<primary><command>getty</command></primary>"
768 msgstr "<primary><command>getty</command></primary>"
769
770 #, fuzzy
771 #| msgid "<primary>server</primary><secondary>client/server architecture</secondary>"
772 msgid "<primary>service</primary><secondary><filename>[email protected]</filename></secondary>"
773 msgstr "<primary>serveur</primary><secondary>architecture client/serveur</secondary>"
774
775 msgid "<emphasis>VOCABULARY</emphasis> Console and terminal"
776 msgstr "<emphasis>VOCABULAIRE</emphasis> Console et terminal"
777
778 #, fuzzy
779 #| msgid "<primary>inode</primary>"
780 msgid "<primary>console</primary>"
781 msgstr "<primary><foreignphrase>inode</foreignphrase></primary>"
782
783 #, fuzzy
784 #| msgid "<primary>permissions</primary>"
785 msgid "<primary>terminal</primary>"
786 msgstr "<primary>permissions</primary>"
787
788 msgid "The first computers were usually separated into several, very large parts: the storage enclosure and the central processing unit were separate from the peripheral devices used by the operators to control them. These were part of a separate furniture, the “console”. This term was retained, but its meaning has changed. It has become more or less synonymous with “terminal”, being a keyboard and a screen."
789 msgstr "Les premiers ordinateurs étaient habituellement séparés en plusieurs parties, très volumineuses : l'armoire de stockage et l'unité de calcul étaient distinctes des organes de contrôle utilisés par les opérateurs. Ceux-ci constituaient donc un meuble à part, la « console ». Ce terme est resté, mais sa signification a évolué. Il est devenu plus ou moins synonyme de « terminal » : un ensemble constitué d'un clavier et d'un écran."
790
791 msgid "With the development of computers, operating systems have offered several virtual consoles to allow for several independent sessions at the same time, even if there is only one keyboard and screen. Most GNU/Linux systems offer six virtual consoles (in text mode), accessible by typing the key combinations <keycombo action=\"simul\"> <keycap>Control</keycap> <keycap>Alt</keycap> <keycap>F1</keycap> </keycombo> through <keycombo action=\"simul\"> <keycap>Control</keycap> <keycap>Alt</keycap> <keycap>F6</keycap> </keycombo>."
792 msgstr "Au fil de l'évolution de l'informatique, les systèmes d'exploitation ont proposé plusieurs consoles virtuelles pour offrir plusieurs sessions indépendantes en même temps, même s'il n'existe physiquement qu'un clavier et un écran. La plupart des systèmes GNU/Linux proposent ainsi six consoles virtuelles (en mode texte), accessibles grâce aux combinaisons de touches <keycombo action=\"simul\"> <keycap>Control</keycap> <keycap>Alt</keycap> <keycap>F1</keycap> </keycombo> à <keycombo action=\"simul\"> <keycap>Control</keycap> <keycap>Alt</keycap> <keycap>F6</keycap> </keycombo>."
793
794 #, fuzzy
795 #| msgid "By extension, the terms “console” and “terminal” can also refer to a terminal emulator in a graphical X11 session (such as <command>xterm</command>, <command>gnome-terminal</command> or <command>konsole</command>)."
796 msgid "By extension, the terms “console” and “terminal” can also refer to a terminal emulator in a graphical session (such as <command>xterm</command>, <command>gnome-terminal</command> or <command>konsole</command>)."
797 msgstr "Les termes « console » et « terminal » peuvent aussi, au sens large, désigner un émulateur de terminal dans une session graphique X11 (comme <command>xterm</command>, <command>gnome-terminal</command> ou <command>konsole</command>)."
798
799 msgid "Remote Login"
800 msgstr "Connexion à distance"
801
802 msgid "It is essential for an administrator to be able to connect to a computer remotely. Servers, confined in their own room, are rarely equipped with permanent keyboards and monitors — but they are connected to the network."
803 msgstr "Il est essentiel pour un administrateur de pouvoir se connecter à distance sur un ordinateur. Les serveurs, confinés dans leur propre salle, disposent en effet rarement d'un clavier et d'un écran connectés en permanence — mais sont reliés au réseau."
804
805 msgid "<emphasis>BACK TO BASICS</emphasis> Client, server"
806 msgstr "<emphasis>B.A.-BA</emphasis> Client, serveur"
807
808 msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
809 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
810
811 msgid "<primary>server</primary><secondary>client/server architecture</secondary>"
812 msgstr "<primary>serveur</primary><secondary>architecture client/serveur</secondary>"
813
814 msgid "A system where several processes communicate with each other is often described with the “client/server” metaphor. The server is the program that takes requests coming from a client and executes them. It is the client that controls operations, the server doesn't take any initiative of its own."
815 msgstr "Lorsqu'un système comporte plusieurs mécanismes qui communiquent entre eux, on emploie souvent la métaphore client/serveur. Le serveur désigne alors le programme qui attend des requêtes en provenance d'un client, puis les exécute. C'est le client qui dirige les opérations, le serveur ne prenant pas d'initiatives de lui-même."
816
817 msgid "<primary>login</primary><secondary>remote login</secondary>"
818 msgstr "<primary>connexion</primary><secondary>à distance</secondary>"
819
820 msgid "<primary>remote login</primary>"
821 msgstr "<primary>distance, connexion</primary>"
822
823 msgid "Secure Remote Login: SSH"
824 msgstr "Connexion à distance sécurisée : SSH"
825
826 msgid "<primary>SSH</primary>"
827 msgstr "<primary>SSH</primary>"
828
829 #, fuzzy
830 #| msgid "<primary>user</primary><secondary>owner</secondary>"
831 msgid "<primary>server</primary><secondary>SSH</secondary>"
832 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
833
834 #, fuzzy
835 #| msgid "<primary><command>rsh</command></primary>"
836 msgid "<primary><command>ssh</command></primary>"
837 msgstr "<primary><command>rsh</command></primary>"
838
839 #, fuzzy
840 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
841 msgid "<primary>Secure Shell</primary><seealso>SSH</seealso>"
842 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
843
844 msgid "The <emphasis>SSH</emphasis> (Secure SHell) protocol was designed with security and reliability in mind. Connections using SSH are secure: the partner is authenticated and all data exchanges are encrypted."
845 msgstr "Le protocole <emphasis>SSH</emphasis> (<foreignphrase>Secured Shell</foreignphrase>, ou shell sécurisé) a été conçu dans une optique de sécurité et de fiabilité. Les connexions ainsi mises en place sont sûres : le partenaire est authentifié et tous les échanges sont chiffrés."
846
847 msgid "<emphasis>CULTURE</emphasis> Telnet and RSH are obsolete"
848 msgstr "<emphasis>CULTURE</emphasis> Telnet et RSH sont obsolètes"
849
850 msgid "<primary><command>telnet</command></primary>"
851 msgstr "<primary><command>telnet</command></primary>"
852
853 msgid "<primary><command>rsh</command></primary>"
854 msgstr "<primary><command>rsh</command></primary>"
855
856 msgid "Before SSH, <emphasis>Telnet</emphasis> and <emphasis>RSH</emphasis> were the main tools used to login remotely. They are now largely obsolete and should no longer be used even if Debian still provides them."
857 msgstr "Avant l'apparition de SSH, <emphasis>Telnet</emphasis> et <emphasis>RSH</emphasis> étaient les outils les plus largement utilisés pour se connecter à distance. Ils sont maintenant véritablement obsolètes et ne devraient plus être utilisés (même si Debian continue de les fournir)."
858
859 msgid "<emphasis>VOCABULARY</emphasis> Authentication, encryption"
860 msgstr "<emphasis>VOCABULAIRE</emphasis> Authentification, chiffrement"
861
862 #, fuzzy
863 #| msgid "When you need to give a client the ability to conduct or trigger actions on a server, security is important. You must ensure the identity of the client; this is authentication. This identity usually consists of a password that must be kept secret, or any other client could get the password. This is the purpose of encryption, which is a form of encoding that allows two systems to communicate confidential information on a public channel while protecting it from being readable to others."
864 msgid "When you need to give a client the ability to conduct or trigger actions on a server, security is important. You must ensure the identity of the client; this is <emphasis>authentication</emphasis>. This identity usually consists of a password or passphrase that must be kept secret, or any other client could it. This is the purpose of <emphasis>encryption</emphasis>, which is a form of encoding that allows two systems to communicate confidential information on a public channel while protecting it from being readable to others."
865 msgstr "Lorsqu'il s'agit de donner à un client la possibilité d'effectuer ou de déclencher des actions sur un serveur, les implications de sécurité sont importantes. On doit donc s'assurer de l'identité du client ; c'est l'authentification. Cette identité consistant souvent en un mot de passe, il faut bien entendu protéger la confidentialité de ce dernier, faute de quoi n'importe quel autre client pourra le récupérer ; c'est l'objet du chiffrement, qui est une forme de codage permettant à deux systèmes de communiquer des secrets sur un canal public sans qu'ils puissent être interceptés par des tierces parties."
866
867 msgid "Authentication and encryption are often mentioned together, both because they are frequently used together, and because they are usually implemented with similar mathematical concepts."
868 msgstr "L'authentification et le chiffrement sont souvent évoqués ensemble, à la fois parce qu'ils interviennent fréquemment conjointement et parce qu'ils sont en général mis en œuvre à l'aide de concepts mathématiques similaires."
869
870 msgid "<primary><command>scp</command></primary>"
871 msgstr "<primary><command>scp</command></primary>"
872
873 msgid "SSH also offers two file transfer services. <command>scp</command> is a command line tool that can be used like <command>cp</command>, except that any path to another machine is prefixed with the machine's name, followed by a colon."
874 msgstr "SSH offre encore deux services de transfert de fichiers. <command>scp</command> est un utilitaire en ligne de commande qui s'emploie comme <command>cp</command> sauf que tout chemin sur une autre machine sera préfixé du nom de celle-ci suivi du caractère deux-points."
875
876 msgid "<computeroutput>$ </computeroutput><userinput>scp file machine:/tmp/</userinput>"
877 msgstr "<computeroutput>$ </computeroutput><userinput>scp fichier machine:/tmp/</userinput>"
878
879 msgid "<primary><command>sftp</command></primary>"
880 msgstr "<primary><command>sftp</command></primary>"
881
882 msgid "<command>sftp</command> is an interactive command, similar to <command>ftp</command>. In a single session, <command>sftp</command> can transfer several files, and it is possible to manipulate remote files with it (delete, rename, change permissions, etc.)."
883 msgstr "<command>sftp</command> est un programme interactif très similaire à <command>ftp</command>. Ainsi, une même session <command>sftp</command> peut transférer plusieurs fichiers et il est possible d'y manipuler les fichiers distants (supprimer, changer leur nom ou leurs droits, etc.)."
884
885 #, fuzzy
886 #| msgid "<primary>tunnel (SSH)</primary><seealso>VPN</seealso>"
887 msgid "<primary>OpenSSH</primary><seealso>SSH</seealso>"
888 msgstr "<primary>SSH</primary><secondary>tunnel SSH</secondary><seealso>VPN</seealso>"
889
890 #, fuzzy
891 #| msgid "<primary>SSH tunnel</primary><secondary>VNC</secondary>"
892 msgid "<primary>SSH</primary><secondary>OpenSSH</secondary>"
893 msgstr "<primary>tunnel SSH</primary> <secondary>VNC</secondary>"
894
895 msgid "Debian uses OpenSSH, a free version of SSH maintained by the <command>OpenBSD</command> project (a free operating system based on the BSD kernel, focused on security) and fork of the original SSH software developed by the SSH Communications Security Corp company, of Finland. This company initially developed SSH as free software, but eventually decided to continue its development under a proprietary license. The OpenBSD project then created OpenSSH to maintain a free version of SSH."
896 msgstr "Debian emploie OpenSSH, version libre de SSH maintenue par le projet <command>OpenBSD</command> (un système d'exploitation libre basé sur un noyau BSD et qui se focalise sur la sécurité) et <foreignphrase>fork</foreignphrase> du logiciel SSH originel développé par la société finlandaise SSH Communications Security Corp. Celle-ci, qui en avait débuté le développement sous la forme d'un logiciel libre, avait en effet décidé de le poursuivre sous une licence propriétaire. Le projet OpenBSD créa donc OpenSSH pour maintenir une version libre de SSH."
897
898 msgid "<emphasis>BACK TO BASICS</emphasis> <foreignphrase>Fork</foreignphrase>"
899 msgstr "<emphasis>B.A.-BA</emphasis> Fork"
900
901 msgid "<primary>fork</primary>"
902 msgstr "<primary><foreignphrase>fork</foreignphrase></primary>"
903
904 msgid "A “fork”, in the software field, means a new project that starts as a clone of an existing project, and that will compete with it. From there on, both software will usually quickly diverge in terms of new developments. A fork is often the result of disagreements within the development team."
905 msgstr "Le terme <foreignphrase>fork</foreignphrase> (fourche, ou projet dérivé), dans le cadre d'un logiciel, désigne un nouveau projet, concurrent de l'original dont il s'inspire, et qu'il a entièrement copié au début. Ces deux logiciels identiques divergent rapidement sur le plan du développement. C'est souvent un désaccord dans l'équipe qui est à l'origine d'un <foreignphrase>fork</foreignphrase>."
906
907 msgid "The option to fork a project is a direct result of the very nature of free software; a fork is a healthy event when it enables the continuation of a project as free software (for example in case of license changes). A fork arising from technical or personal disagreements is often a waste of human resources; another resolution would be preferable. Mergers of two projects that previously went through a prior fork are not unheard of."
908 msgstr "Cette possibilité provient directement du caractère libre d'un logiciel ; un <foreignphrase>fork</foreignphrase> est sain lorsqu'il permet la poursuite du développement sous forme de logiciel libre (en cas de changement de licence par exemple). Un <foreignphrase>fork</foreignphrase> issu d'un désaccord technique ou relationnel est souvent un gâchis de ressources humaines ; on lui préférera la résolution du différend. Il n'est d'ailleurs pas rare d'assister à la fusion des branches d'un <foreignphrase>fork</foreignphrase> quand elles font ce constat amer."
909
910 #, fuzzy
911 #| msgid "<primary><emphasis role=\"pkg\">tsclient</emphasis></primary>"
912 msgid "<primary><emphasis role=\"pkg\">openssh-client</emphasis></primary>"
913 msgstr "<primary><emphasis role=\"pkg\">tsclient</emphasis></primary>"
914
915 #, fuzzy
916 #| msgid "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
917 msgid "<primary><emphasis role=\"pkg\">openssh-server</emphasis></primary>"
918 msgstr "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
919
920 #, fuzzy
921 #| msgid "OpenSSH is split into two packages: the client part is in the <emphasis role=\"pkg\">openssh-client</emphasis> package, and the server is in the <emphasis role=\"pkg\">openssh-server</emphasis> package. The <emphasis role=\"pkg\">ssh</emphasis> meta-package depends on both parts and facilitates installation of both (<command>apt install ssh</command>)."
922 msgid "OpenSSH is split into two packages: the client part is in the <emphasis role=\"pkg\">openssh-client</emphasis> package, and the server is in the <emphasis role=\"pkg\">openssh-server</emphasis> package. The <emphasis role=\"pkg\">ssh</emphasis> meta-package depends on both parts and facilitates installation of both (<command>apt install ssh</command>), while the <emphasis role=\"pkg\">task-ssh-server</emphasis>, often chosen during the initial installation, depends on the server package only."
923 msgstr "OpenSSH est séparé en deux paquets. La partie cliente est dans le paquet <emphasis role=\"pkg\">openssh-client</emphasis>, le serveur dans <emphasis role=\"pkg\">openssh-server</emphasis>. Le métapaquet <emphasis role=\"pkg\">ssh</emphasis> dépend des deux parties et facilite leur installation conjointe (<command>apt install ssh</command>)."
924
925 msgid "Key-Based Authentication"
926 msgstr "Authentification par clé"
927
928 #, fuzzy
929 #| msgid "<primary>log</primary><secondary>forwarding</secondary>"
930 msgid "<primary>SSH</primary><secondary>key creation</secondary>"
931 msgstr "<primary><foreignphrase>log</foreignphrase></primary> <secondary>déporté</secondary>"
932
933 msgid "Each time someone logs in over SSH, the remote server asks for a password to authenticate the user. This can be problematic if you want to automate a connection, or if you use a tool that requires frequent connections over SSH. This is why SSH offers a key-based authentication system."
934 msgstr "Chaque fois que l'on se connecte par SSH, le serveur distant demande un mot de passe pour authentifier l'utilisateur. Cela peut être problématique si l'on souhaite automatiser une connexion ou si l'on emploie un outil qui requiert de fréquentes connexions par SSH. C'est pourquoi SSH propose un système d'authentification par clé."
935
936 #, fuzzy
937 #| msgid "<primary><command>rsync</command></primary>"
938 msgid "<primary><command>ssh-keygen</command></primary>"
939 msgstr "<primary><command>rsync</command></primary>"
940
941 #, fuzzy
942 #| msgid "<primary><command>acpid</command></primary>"
943 msgid "<primary><command>ssh-copy-id</command></primary>"
944 msgstr "<primary><command>acpid</command></primary>"
945
946 msgid "The user generates a key pair on the client machine with <command>ssh-keygen -t rsa</command>; the so generated public key is stored in <filename>~/.ssh/id_rsa.pub</filename>, while the corresponding private key is stored in <filename>~/.ssh/id_rsa</filename>. The user can then use <command>ssh-copy-id <replaceable>server</replaceable></command> to add their public key to the <filename>~/.ssh/authorized_keys</filename> file on the server, or, if SSH access hasn't been enabled yet, they have to ask the administrator to add their key manually."
947 msgstr ""
948
949 #, fuzzy
950 #| msgid "<primary>logs</primary><secondary>dispatching</secondary>"
951 msgid "<primary>SSH</primary><secondary>passphrase cache</secondary>"
952 msgstr "<primary>logs</primary><secondary>répartition</secondary>"
953
954 #, fuzzy
955 #| msgid "<primary>link</primary><secondary>hard link</secondary>"
956 msgid "<primary>SSH</primary><secondary>passwordless</secondary>"
957 msgstr "<primary>lien</primary><secondary>dur</secondary>"
958
959 #, fuzzy
960 #| msgid "<primary>logs</primary><secondary>dispatching</secondary>"
961 msgid "<primary>SSH</primary><secondary>authentication agent</secondary>"
962 msgstr "<primary>logs</primary><secondary>répartition</secondary>"
963
964 #, fuzzy
965 #| msgid "<primary><command>at</command></primary>"
966 msgid "<primary><command>ssh-agent</command></primary>"
967 msgstr "<primary><command>at</command></primary>"
968
969 #, fuzzy
970 #| msgid "<primary>booting</primary><secondary>the system</secondary>"
971 msgid "<primary>X.org</primary><secondary><filename>/etc/X11/Xsession.options</filename></secondary>"
972 msgstr "<primary>démarrage</primary><secondary>du système</secondary>"
973
974 #, fuzzy
975 #| msgid "The user generates a key pair on the client machine with <command>ssh-keygen -t rsa</command>; the public key is stored in <filename>~/.ssh/id_rsa.pub</filename>, while the corresponding private key is stored in <filename>~/.ssh/id_rsa</filename>. The user then uses <command>ssh-copy-id <replaceable>server</replaceable></command> to add their public key to the <filename>~/.ssh/authorized_keys</filename> file on the server. If the private key was not protected with a “passphrase” at the time of its creation, all subsequent logins on the server will work without a password. Otherwise, the private key must be decrypted each time by entering the passphrase. Fortunately, <command>ssh-agent</command> allows us to keep private keys in memory to not have to regularly re-enter the password. For this, you simply use <command>ssh-add</command> (once per work session) provided that the session is already associated with a functional instance of <command>ssh-agent</command>. Debian activates it by default in graphical sessions, but this can be deactivated by changing <filename>/etc/X11/Xsession.options</filename>. For a console session, you can manually start it with <command>eval $(ssh-agent)</command>."
976 msgid "If the private key was not protected with a “passphrase” at the time of its creation, all subsequent logins on the server will work without a password. Otherwise, the private key must be decrypted each time by entering the passphrase. Fortunately, <command>ssh-agent</command> allows us to keep private keys in memory to not have to regularly re-enter the password. For this, you simply use <command>ssh-add</command> (once per work session) provided that the session is already associated with a functional instance of <command>ssh-agent</command>. Debian activates it by default in graphical sessions, but this can be deactivated by changing <filename>/etc/X11/Xsession.options</filename> and commenting out <literal>use-ssh-agent</literal>. For a console session, you can manually start the agent with <command>eval $(ssh-agent)</command>."
977 msgstr "L'utilisateur génère une biclé sur la machine cliente avec <command>ssh-keygen -t rsa</command> : la clé publique est stockée dans <filename>~/.ssh/id_rsa.pub</filename> tandis que la clé privée correspondante est placée dans <filename>~/.ssh/id_rsa</filename>. L'utilisateur emploie alors <command>ssh-copy-id <replaceable>serveur</replaceable></command> pour ajouter sa clé publique dans le fichier <filename>~/.ssh/authorized_keys</filename> du serveur. Si, lors de sa création, la clé privée n'a pas été protégée par une « phrase de passe » <foreignphrase>(passphrase)</foreignphrase> qui la protège, toutes les connexions au serveur fonctionneront désormais sans mot de passe. Sinon, il faudra à chaque fois déchiffrer la clé privée donc saisir la phrase de passe. Heureusement <command>ssh-agent</command> va nous permettre de garder en mémoire la (ou les) clé(s) privée(s) afin de ne pas devoir régulièrement ressaisir la phrase de protection. Pour cela, il suffit d'invoquer <command>ssh-add</command> (une fois par session de travail) à la condition que la session soit déjà associée à une instance fonctionnelle de <command>ssh-agent</command>. Debian l'active en standard dans les sessions graphiques, mais cela peut se désactiver en modifiant <filename>/etc/X11/Xsession.options</filename>. Pour une session en console, on peut le démarrer manuellement avec <command>eval $(ssh-agent)</command>."
978
979 msgid "<emphasis>SECURITY</emphasis> Protection of the private key"
980 msgstr "<emphasis>SÉCURITÉ</emphasis> Protection de la clé privée"
981
982 #, fuzzy
983 #| msgid "<primary>mask</primary><secondary>rights mask</secondary>"
984 msgid "<primary>SSH</primary><secondary>private key</secondary>"
985 msgstr "<primary>masque</primary><secondary>masque de droits</secondary>"
986
987 msgid "Whoever has the private key can login on the account thus configured. This is why access to the private key is protected by a “passphrase”. Someone who acquires a copy of a private key file (for example, <filename>~/.ssh/id_rsa</filename>) still has to know this phrase in order to be able to use it. This additional protection is not, however, impregnable, and if you think that this file has been compromised, it is best to disable that key on the computers in which it has been installed (by removing it from the <filename>authorized_keys</filename> files) and replacing it with a newly generated key."
988 msgstr "Quiconque dispose de la clé privée peut se connecter sur le compte ainsi configuré. C'est pourquoi l'accès à la clé privée est protégé par une « phrase de passe ». Quelqu'un qui récupérerait une copie d'un fichier abritant une clé privée (par exemple <filename>~/.ssh/id_rsa</filename>) devrait encore retrouver cette phrase avant de pouvoir l'utiliser. Cette protection supplémentaire n'est cependant pas inviolable et si l'on pense que ce fichier a été compromis, il vaut mieux désactiver cette clé sur les ordinateurs où elle a été installée (en la retirant des fichiers <filename>authorized_keys</filename>) et la remplacer par une clé nouvellement générée."
989
990 msgid "<emphasis>CULTURE</emphasis> OpenSSL flaw in Debian <emphasis role=\"distribution\">Etch</emphasis>"
991 msgstr "<emphasis>CULTURE</emphasis> Faille OpenSSL de Debian <emphasis role=\"distribution\">Etch</emphasis>"
992
993 #, fuzzy
994 #| msgid "The OpenSSL library, as initially provided in Debian <emphasis role=\"distribution\">Etch</emphasis>, had a serious problem in its random number generator (RNG). Indeed, the Debian maintainer had made a change so that applications using it would no longer generate warnings when analyzed by memory testing tools like <command>valgrind</command>. Unfortunately, this change also meant that the RNG was employing only one source of entropy corresponding to the process number (PID) whose 32,000 possible values do not offer enough randomness. <ulink type=\"block\" url=\"http://www.debian.org/security/2008/dsa-1571\" />"
995 msgid "The OpenSSL library, as initially provided in Debian <emphasis role=\"distribution\">Etch</emphasis>, had a serious problem in its random number generator (RNG). Indeed, the Debian maintainer had made a change so that applications using it would no longer generate warnings when analyzed by memory testing tools like <command>valgrind</command>. Unfortunately, this change also meant that the RNG was employing only one source of entropy corresponding to the process number (PID) whose 32,000 possible values do not offer enough randomness. <ulink type=\"block\" url=\"https://www.debian.org/security/2008/dsa-1571\" />"
996 msgstr "La bibliothèque OpenSSL telle qu'initialement fournie dans Debian <emphasis role=\"distribution\">Etch</emphasis> souffrait d'un grave problème dans son générateur de nombres aléatoires (RNG, <foreignphrase>Random Number Generator</foreignphrase>). Le mainteneur Debian avait en effet effectué une modification afin que la bibliothèque ne soit pas la source d'avertissements pour des programmes l'utilisant et qui seraient analysés par des outils vérificateurs de mémoire comme <command>valgrind</command>. Malheureusement, ce changement a également eu pour conséquence que le RNG n'employait plus qu'une seule source d'aléas correspondant au numéro du processus (PID) dont le nombre est très restreint (environ 32 000). <ulink type=\"block\" url=\"http://www.debian.org/security/2008/dsa-1571\" />"
997
998 #, fuzzy
999 #| msgid "<primary><command>rsh</command></primary>"
1000 msgid "<primary><command>ssh-vulnkey</command></primary>"
1001 msgstr "<primary><command>rsh</command></primary>"
1002
1003 #, fuzzy
1004 #| msgid "<primary><emphasis role=\"pkg\">tsclient</emphasis></primary>"
1005 msgid "<primary><emphasis role=\"pkg\">openssh-blacklist</emphasis></primary>"
1006 msgstr "<primary><emphasis role=\"pkg\">tsclient</emphasis></primary>"
1007
1008 msgid "Specifically, whenever OpenSSL was used to generate a key, it always produced a key within a known set of hundreds of thousands of keys (32,000 multiplied by a small number of key lengths). This affected SSH keys, SSL keys, and X.509 certificates used by numerous applications, such as OpenVPN. A cracker had only to try all of the keys to gain unauthorized access. To reduce the impact of the problem, the SSH daemon was modified to refuse problematic keys that are listed in the <emphasis role=\"pkg\">openssh-blacklist</emphasis> and <emphasis role=\"pkg\">openssh-blacklist-extra</emphasis> packages. Additionally, the <command>ssh-vulnkey</command> command allows identification of possibly compromised keys in the system."
1009 msgstr "Concrètement, chaque fois que OpenSSL était employé pour générer une clé, il produisait systématiquement une clé comprise dans un ensemble connu de quelques centaines de milliers de clés (32 000, multipliées par un petit nombre de longueurs de clés). Cela affectait les clés SSH, SSL et les certificats X.509 employés par de nombreuses applications comme OpenVPN. Un pirate n'avait plus qu'à essayer toutes les clés pour essayer d'obtenir un accès non autorisé. Pour réduire l'impact du problème, le démon SSH a été modifié pour refuser les clés problématiques qui sont recensées dans les paquets <emphasis role=\"pkg\">openssh-blacklist</emphasis> et <emphasis role=\"pkg\">openssh-blacklist-extra</emphasis>. De plus, le programme <command>ssh-vulnkey</command> permet d'identifier d'éventuelles clés compromises présentes sur le système."
1010
1011 msgid "A more thorough analysis of this incident brings to light that it is the result of multiple (small) problems, both within the OpenSSL project and with the Debian package maintainer. A widely used library like OpenSSL should — without modifications — not generate warnings when tested by <command>valgrind</command>. Furthermore, the code (especially the parts as sensitive as the RNG) should be better commented to prevent such errors. On Debian's side, the maintainer wanted to validate the modifications with the OpenSSL developers, but simply explained the modifications without providing the corresponding patch to review and failed to mention his role within Debian. Finally, the maintenance choices were sub-optimal: the changes made to the original code were not clearly documented; all the modifications were effectively stored in a Subversion repository, but they ended up all lumped into one single patch during creation of the source package."
1012 msgstr "Une analyse plus poussée de cet incident permet de se rendre compte que c'est le fruit de multiples (petits) problèmes tant au niveau du projet OpenSSL que du mainteneur du paquet Debian. Une bibliothèque aussi largement employée que OpenSSL devrait — sans modifications — ne pas générer d'avertissements lorsque scrutée par <command>valgrind</command>. En outre, le code (en particulier des parties aussi sensibles que le RNG) mériterait d'être mieux commenté pour éviter de telles erreurs. De son côté, le mainteneur Debian, en voulant faire valider sa modification par les développeurs d'OpenSSL, s'est contenté d'expliquer la modification sans fournir de patch à relire, et a négligé de préciser son rôle au sein de Debian. Enfin, ses choix de maintenance n'étaient pas optimaux : les changements effectués par rapport au logiciel original n'étaient pas clairement documentés ; toutes les modifications étaient certes stockées dans un dépôt Subversion mais elles se retrouvaient agglomérées en un seul patch lors de la création du paquet source."
1013
1014 #, fuzzy
1015 #| msgid "It is difficult under such conditions to find the corrective measures to prevent such incidents from recurring. The lesson to be learned here is that every divergence Debian introduces to upstream software must be justified, documented, submitted to the upstream project when possible, and widely publicized. It is from this perspective that the new source package format (“3.0 (quilt)”) and the Debian sources webservice were developed. <ulink type=\"block\" url=\"http://sources.debian.net\" />"
1016 msgid "It is difficult under such conditions to find the corrective measures to prevent such incidents from recurring. The lesson to be learned here is that every divergence Debian introduces to upstream software must be justified, documented, submitted to the upstream project when possible, and widely publicized. It is from this perspective that the new source package format (“3.0 (quilt)”) and the Debian sources webservice were developed. <ulink type=\"block\" url=\"https://sources.debian.org\" />"
1017 msgstr "Difficile dans ces conditions de trouver des mesures correctives pour éviter que de tels incidents ne se reproduisent. La leçon retenue est que chaque divergence introduite par Debian par rapport au logiciel amont doit être justifiée, documentée, soumise au projet amont lorsque possible et largement publiée. C'est dans cette optique qu'ont été développés le nouveau format de paquet source (\"3.0 (quilt)\") et le service web de consultation des sources Debian. <ulink type=\"block\" url=\"http://sources.debian.net\" />"
1018
1019 #, fuzzy
1020 #| msgid "Key-Based Authentication"
1021 msgid "Cert-Based Authentication"
1022 msgstr "Authentification par clé"
1023
1024 #, fuzzy
1025 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1026 msgid "<primary>SSH</primary><secondary>signed key</secondary>"
1027 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1028
1029 #, fuzzy
1030 #| msgid "<primary>booting</primary><secondary>the system</secondary>"
1031 msgid "<primary>SSH</primary><secondary><literal>TrustedUserCAKeys</literal></secondary>"
1032 msgstr "<primary>démarrage</primary><secondary>du système</secondary>"
1033
1034 #, fuzzy
1035 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1036 msgid "<primary>SSH</primary><secondary><literal>HostCertificate</literal></secondary>"
1037 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1038
1039 #, fuzzy
1040 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1041 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/ssh/sshd_config</filename></secondary>"
1042 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1043
1044 #, fuzzy
1045 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1046 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/ssh/known_hosts</filename></secondary>"
1047 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1048
1049 msgid "SSH keys cannot just be protected by a password (or not). An often unknown feature is that they can also be signed via certificate, both the host as well as the client keys. This approach comes with several advantages. Instead of maintaining an <filename>authorized_keys</filename> file per user as described in the previous section, the SSH server can be configured to trust all client keys signed by the same certificate (see also <xref linkend=\"sect.easy-rsa\" />) by using the <literal>TrustedUserCAKeys</literal> and <literal>HostCertificate</literal> directives in <filename>/etc/ssh/sshd_config</filename>."
1050 msgstr ""
1051
1052 msgid ""
1053 "\n"
1054 "TrustedUserCAKeys /etc/ssh/ssh_users_ca.pub\n"
1055 "\n"
1056 "HostKey /etc/ssh/ssh_host_ecdsa_key\n"
1057 "HostCertificate /etc/ssh/ssh_host_ecdsa_key-cert.pub"
1058 msgstr ""
1059
1060 msgid "Vice-versa the clients can also be configured to trust the host key signed by the same authority, making it easier to maintain the <filename>known_hosts</filename> file (even system wide via <filename>/etc/ssh/known_hosts</filename>)."
1061 msgstr ""
1062
1063 msgid "@cert-authority *.falcot.com ssh-rsa AAAA[..]"
1064 msgstr ""
1065
1066 msgid "Both, public key and certificate authentication, can be used alongside each other."
1067 msgstr ""
1068
1069 msgid "Using Remote X11 Applications"
1070 msgstr "Utiliser des applications X11 à distance"
1071
1072 #, fuzzy
1073 #| msgid "<primary>log</primary><secondary>forwarding</secondary>"
1074 msgid "<primary>SSH</primary><secondary><literal>X11Forwarding</literal></secondary>"
1075 msgstr "<primary><foreignphrase>log</foreignphrase></primary> <secondary>déporté</secondary>"
1076
1077 #, fuzzy
1078 #| msgid "<primary>login</primary><secondary>remote login</secondary>"
1079 msgid "<primary>SSH</primary><secondary><literal>remote graphical applications</literal></secondary>"
1080 msgstr "<primary>connexion</primary><secondary>à distance</secondary>"
1081
1082 #, fuzzy
1083 #| msgid "<primary>remote graphical desktop</primary>"
1084 msgid "<primary>remote graphical application</primary>"
1085 msgstr "<primary>déporté, bureau graphique</primary>"
1086
1087 #, fuzzy
1088 #| msgid "<primary>desktop, remote graphical desktop</primary>"
1089 msgid "<primary>application, remote graphical application</primary>"
1090 msgstr "<primary>graphique, bureau déporté</primary>"
1091
1092 msgid "The SSH protocol allows forwarding of graphical data (“X11” session, from the name of the most widespread graphical system in Unix); the server then keeps a dedicated channel for those data. Specifically, a graphical program executed remotely can be displayed on the X.org server of the local screen, and the whole session (input and display) will be secure. Since this feature allows remote applications to interfere with the local system, it is disabled by default. You can enable it by specifying <literal>X11Forwarding yes</literal> in the server configuration file (<filename>/etc/ssh/sshd_config</filename>). Finally, the user must also request it by adding the <literal>-X</literal> option to the <command>ssh</command> command-line."
1093 msgstr "Le protocole SSH permet de faire suivre <foreignphrase>(forward)</foreignphrase> les données graphiques (dites « X11 », du nom du système graphique le plus répandu sous Unix) : le serveur leur réserve alors un canal de données spécifique. Concrètement, une application graphique exécutée à distance peut s'afficher sur le serveur X.org de l'écran local et toute la session (manipulation comme affichage) sera sécurisée. Cette fonctionnalité donne à une application exécutée à distance de nombreuses possibilités d'interférer sur le système local, elle est donc préventivement désactivée par défaut ; on l'activera en précisant <literal>X11Forwarding yes</literal> dans le fichier de configuration <filename>/etc/ssh/sshd_config</filename> du serveur. L'utilisateur pourra ensuite en profiter en spécifiant l'option <literal>-X</literal> de <command>ssh</command>."
1094
1095 #, fuzzy
1096 #| msgid "<emphasis>GOING FURTHER</emphasis> Defining quotas with a script"
1097 msgid "<emphasis>GOING FURTHER</emphasis> Magic cookies in .Xauthority"
1098 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> Définir les quotas par script"
1099
1100 #, fuzzy
1101 #| msgid "<primary><filename>crontab</filename></primary>"
1102 msgid "<primary><filename>.Xauthority</filename></primary>"
1103 msgstr "<primary><filename>crontab</filename></primary>"
1104
1105 #, fuzzy
1106 #| msgid "<primary><command>at</command></primary>"
1107 msgid "<primary><command>xauth</command></primary>"
1108 msgstr "<primary><command>at</command></primary>"
1109
1110 #, fuzzy
1111 #| msgid "<primary>inode</primary>"
1112 msgid "<primary>magic cookie</primary>"
1113 msgstr "<primary><foreignphrase>inode</foreignphrase></primary>"
1114
1115 msgid "When a user connects via SSH and starts a remote X11 session, a so-called <emphasis>magic cookie</emphasis> is created and stored in the <filename>.Xauthority</filename> file in the user's home directory that initiated the connection. This cookie is used by <command>xauth</command> to authenticate the user during the X session. If the user impersonates another user on the system, e.g. using <command>su</command> or <command>sudo</command>, then the cookie is not copied automatically to the target user and the X server will refuse to start graphical applications under the target user's context. You will have to copy the magic cookie into the target user's home directory (by exporting and re-importing the cookie via <command>xauth</command>) to allow another user to start graphical programs as well during the X session."
1116 msgstr ""
1117
1118 msgid "Creating Encrypted Tunnels with Port Forwarding"
1119 msgstr "Créer des tunnels chiffrés avec le <foreignphrase>port forwarding</foreignphrase>"
1120
1121 msgid "<primary>port forwarding</primary>"
1122 msgstr "<primary><foreignphrase>port forwarding</foreignphrase></primary>"
1123
1124 #, fuzzy
1125 #| msgid "<primary>log</primary><secondary>forwarding</secondary>"
1126 msgid "<primary>SSH</primary><secondary>port forwarding</secondary>"
1127 msgstr "<primary><foreignphrase>log</foreignphrase></primary> <secondary>déporté</secondary>"
1128
1129 #, fuzzy
1130 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1131 msgid "<primary>SSH</primary><secondary>tunnel</secondary>"
1132 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1133
1134 msgid "Its <literal>-R</literal> and <literal>-L</literal> options allow <command>ssh</command> to create “encrypted tunnels” between two machines, securely forwarding a local TCP port (see sidebar <xref linkend=\"sidebar.tcp-udp\" />) to a remote machine or vice versa."
1135 msgstr "Ses options <literal>-R</literal> et <literal>-L</literal> permettent à <command>ssh</command> de créer des « tunnels chiffrés » entre deux machines, déportant de manière sécurisée un port TCP (voir l'encadré <xref linkend=\"sidebar.tcp-udp\" />) local vers une machine distante ou vice versa."
1136
1137 msgid "<emphasis>VOCABULARY</emphasis> Tunnel"
1138 msgstr "<emphasis>VOCABULAIRE</emphasis> Tunnel"
1139
1140 #, fuzzy
1141 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
1142 msgid "<primary>tunnel</primary><secondary>SSH</secondary><seealso>VPN</seealso>"
1143 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
1144
1145 #, fuzzy
1146 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
1147 msgid "<primary>SSH</primary><secondary>tunnel</secondary><seealso>VPN</seealso>"
1148 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
1149
1150 msgid "The Internet, and most LANs that are connected to it, operate in packet mode and not in connected mode, meaning that a packet issued from one computer to another is going to be stopped at several intermediary routers to find its way to its destination. You can still simulate a connected operation where the stream is encapsulated in normal IP packets. These packets follow their usual route, but the stream is reconstructed unchanged at the destination. We call this a “tunnel”, analogous to a road tunnel in which vehicles drive directly from the entrance (input) to the exit (output) without encountering any intersections, as opposed to a path on the surface that would involve intersections and changing direction."
1151 msgstr "Le réseau Internet et la plupart des réseaux locaux qui y sont raccordés fonctionnent en mode paquet et non en mode connecté, c'est-à-dire qu'un paquet émis depuis un ordinateur en direction d'un autre va s'arrêter sur plusieurs routeurs intermédiaires pour être acheminé jusqu'à sa destination. On peut néanmoins simuler un fonctionnement connecté, selon lequel le flux est encapsulé dans des paquets IP normaux ; ces paquets suivent leur chemin habituel, mais le flux est restitué tel quel à destination. On parle alors de « tunnel », par analogie avec un tunnel routier, dans lequel les véhicules roulent directement de l'entrée à la sortie sans rencontrer de carrefours, par opposition au trajet en surface qui impliquerait des intersections et des changements de direction."
1152
1153 msgid "You can use this opportunity to add encryption to the tunnel: the stream that flows through it is then unrecognizable from the outside, but it is returned in decrypted form at the exit of the tunnel."
1154 msgstr "On peut profiter de l'opération pour ajouter du chiffrement au tunnel : le flux qui y circule est alors méconnaissable de l'extérieur, mais il est restauré à son état de flux en clair à la sortie du tunnel."
1155
1156 msgid "<command>ssh -L 8000:server:25 intermediary</command> establishes an SSH session with the <replaceable>intermediary</replaceable> host and listens to local port 8000 (see <xref linkend=\"figure.ssh-L\" />). For any connection established on this port, <command>ssh</command> will initiate a connection from the <replaceable>intermediary</replaceable> computer to port 25 on the <replaceable>server</replaceable>, and will bind both connections together."
1157 msgstr "<command>ssh -L 8000:serveur:25 intermediaire</command> lance un <command>ssh</command> qui établit une session vers <replaceable>intermediaire</replaceable> tout en écoutant le port 8000 local. Toute connexion établie sur ce port fera débuter par <command>ssh</command> une connexion de l'ordinateur <replaceable>intermediaire</replaceable> vers le port 25 de <replaceable>serveur</replaceable>, à laquelle <command>ssh</command> la reliera."
1158
1159 msgid "<command>ssh -R 8000:server:25 intermediary</command> also establishes an SSH session to the <replaceable>intermediary</replaceable> computer, but it is on this machine that <command>ssh</command> listens to port 8000 (see <xref linkend=\"figure.ssh-R\" />). Any connection established on this port will cause <command>ssh</command> to open a connection from the local machine on to port 25 of the <replaceable>server</replaceable>, and to bind both connections together."
1160 msgstr "<command>ssh -R 8000:serveur:25 intermediaire</command> établit également une session SSH vers <replaceable>intermediaire</replaceable>, mais c'est sur cette machine que le processus <command>ssh</command> écoute le port 8000. Toute connexion établie sur ce port fera débuter par <command>ssh</command> une connexion depuis la machine locale vers le port 25 de <replaceable>serveur</replaceable>, à laquelle <command>ssh</command> la reliera."
1161
1162 msgid "In both cases, connections are made to port 25 on the <replaceable>server</replaceable> host, which pass through the SSH tunnel established between the local machine and the <replaceable>intermediary</replaceable> machine. In the first case, the entrance to the tunnel is local port 8000, and the data move towards the <replaceable>intermediary</replaceable> machine before being directed to the <replaceable>server</replaceable> on the “public” network. In the second case, the input and output in the tunnel are reversed; the entrance is port 8000 on the <replaceable>intermediary</replaceable> machine, the output is on the local host, and the data are then directed to the <replaceable>server</replaceable>. In practice, the server is usually either the local machine or the intermediary. That way SSH secures the connection from one end to the other."
1163 msgstr "Dans les deux cas, il s'agit de créer des connexions vers le port 25 de la machine <replaceable>serveur</replaceable>, qui passent au travers du tunnel SSH établi entre la machine locale et la machine <replaceable>intermediaire</replaceable>. Dans le premier cas, l'entrée du tunnel est le port 8000 local et les données transitent vers <replaceable>intermediaire</replaceable> avant de se diriger vers <replaceable>serveur</replaceable> sur le réseau « public ». Dans le second cas, l'entrée et la sortie du tunnel sont inversées : l'entrée est le port 8000 d'<replaceable>intermediaire</replaceable>, la sortie est locale et les données se dirigent ensuite vers <replaceable>serveur</replaceable> depuis la machine locale. En pratique, dans les cas d'usage les plus courants, le serveur est soit la machine locale, soit l'intermédiaire."
1164
1165 msgid "Forwarding a local port with SSH"
1166 msgstr "Déport d'un port local par SSH"
1167
1168 msgid "Forwarding a remote port with SSH"
1169 msgstr "Déport d'un port distant par SSH"
1170
1171 msgid "Using Remote Graphical Desktops"
1172 msgstr "Accéder à distance à des bureaux graphiques"
1173
1174 msgid "VNC (Virtual Network Computing) allows remote access to graphical desktops."
1175 msgstr "VNC (<foreignphrase>Virtual Network Computing</foreignphrase>, ou informatique en réseau virtuel) permet d'accéder à distance à des bureaux graphiques."
1176
1177 msgid "<primary>VNC</primary>"
1178 msgstr "<primary>VNC</primary>"
1179
1180 #, fuzzy
1181 #| msgid "<primary>Virtual Network Computing</primary>"
1182 msgid "<primary>Virtual Network Computing</primary><seealso>VNC</seealso>"
1183 msgstr "<primary><foreignphrase>Virtual Network Computing</foreignphrase></primary>"
1184
1185 msgid "<primary>graphical desktop</primary><secondary>remote</secondary>"
1186 msgstr "<primary>bureau graphique</primary><secondary>déporté</secondary>"
1187
1188 msgid "<primary>remote graphical desktop</primary>"
1189 msgstr "<primary>déporté, bureau graphique</primary>"
1190
1191 msgid "<primary>desktop, remote graphical desktop</primary>"
1192 msgstr "<primary>graphique, bureau déporté</primary>"
1193
1194 msgid "This tool is mostly used for technical assistance; the administrator can see the errors that the user is facing, and show them the correct course of action without having to stand by them."
1195 msgstr "Cet outil sert principalement en assistance technique : l'administrateur peut constater les erreurs de l'utilisateur et lui montrer la bonne manipulation sans devoir se déplacer à ses côtés."
1196
1197 #, fuzzy
1198 #| msgid "<primary>owner</primary><secondary>user</secondary>"
1199 msgid "<primary>VNC</primary><secondary>server</secondary>"
1200 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
1201
1202 #, fuzzy
1203 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1204 msgid "<primary>server</primary><secondary>VNC</secondary>"
1205 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1206
1207 #, fuzzy
1208 #| msgid "<primary><emphasis role=\"pkg\">vino</emphasis></primary>"
1209 msgid "<primary><emphasis role=\"pkg\">vino</emphasis></primary><seealso>VNC</seealso>"
1210 msgstr "<primary><emphasis role=\"pkg\">vino</emphasis></primary>"
1211
1212 #, fuzzy
1213 #| msgid "<primary><emphasis role=\"pkg\">krfb</emphasis></primary>"
1214 msgid "<primary><emphasis role=\"pkg\">krfb</emphasis></primary><seealso>VNC</seealso>"
1215 msgstr "<primary><emphasis role=\"pkg\">krfb</emphasis></primary>"
1216
1217 #, fuzzy
1218 #| msgid "<primary><emphasis role=\"pkg\">x11vnc</emphasis></primary>"
1219 msgid "<primary><emphasis role=\"pkg\">x11vnc</emphasis></primary><seealso>VNC</seealso>"
1220 msgstr "<primary><emphasis role=\"pkg\">x11vnc</emphasis></primary>"
1221
1222 #, fuzzy
1223 #| msgid "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
1224 msgid "<primary><emphasis role=\"pkg\">tightvncserver</emphasis></primary><seealso>VNC</seealso>"
1225 msgstr "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
1226
1227 #, fuzzy
1228 #| msgid "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
1229 msgid "<primary><emphasis role=\"pkg\">tigervnc-standalone-server</emphasis></primary><seealso>VNC</seealso>"
1230 msgstr "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
1231
1232 #, fuzzy
1233 #| msgid "First, the user must authorize sharing their session. The GNOME graphical desktop environment in <emphasis role=\"distribution\">Jessie</emphasis> includes that option in its configuration panel (contrary to previous versions of Debian, where the user had to install and run <command>vino</command>). KDE still requires using <command>krfb</command> to allow sharing an existing session over VNC. For other graphical desktop environments, the <command>x11vnc</command> command (from the Debian package of the same name) serves the same purpose; you can make it available to the user with an explicit icon."
1234 msgid "First, the user must authorize sharing their session. The GNOME graphical desktop environment includes that option via <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Sharing</guimenuitem> </menuchoice> (contrary to previous versions of Debian, where the user had to install and run <command>vino</command>). For this to work <emphasis role=\"pkg\">network-manager</emphasis> must be managing the network used (e.g. enable the <literal>managed</literal> mode for devices handled by <emphasis role=\"pkg\">ifupdown</emphasis> in <filename>/etc/NetworkManager/NetworkManager.conf</filename>). KDE Plasma still requires using <command>krfb</command> to allow sharing an existing session over VNC. For other graphical desktop environments, the <command>x11vnc</command> or <command>tightvncserver</command> commands (from the Debian packages of the same name) or <command>tigervncserver</command> (<emphasis role=\"pkg\">tigervnc-standalone-server</emphasis>) serve the same purpose and provide the <emphasis role=\"pkg\">vnc-server</emphasis> virtual package; you can make either of them available to the user with an explicit menu or desktop entry."
1235 msgstr "Il faut tout d'abord que l'utilisateur autorise le partage de sa session. Dans <emphasis role=\"distribution\">Jessie</emphasis>, l'environnement de bureau GNOME inclut cette option dans son panneau de configuration (contrairement aux versions précédentes où il était nécessaire d'installer vino). En ce qui concerne KDE, il faut exécuter <command>krfb</command> pour pouvoir partager le bureau actif via VNC. Pour les autres environnements bureautiques, la commande <command>x11vnc</command> (du paquet Debian éponyme) a le même effet ; on pourra la rendre disponible à l'utilisateur via une icône explicite."
1236
1237 #, fuzzy
1238 #| msgid "<primary>link</primary><secondary>hard link</secondary>"
1239 msgid "<primary>VNC</primary><secondary>client</secondary>"
1240 msgstr "<primary>lien</primary><secondary>dur</secondary>"
1241
1242 #, fuzzy
1243 #| msgid "<primary><emphasis role=\"pkg\">vinagre</emphasis></primary>"
1244 msgid "<primary><emphasis role=\"pkg\">vinagre</emphasis></primary><seealso>VNC</seealso>"
1245 msgstr "<primary><emphasis role=\"pkg\">vinagre</emphasis></primary>"
1246
1247 #, fuzzy
1248 #| msgid "<primary><emphasis role=\"pkg\">krdc</emphasis></primary>"
1249 msgid "<primary><emphasis role=\"pkg\">krdc</emphasis></primary><seealso>VNC</seealso>"
1250 msgstr "<primary><emphasis role=\"pkg\">krdc</emphasis></primary>"
1251
1252 #, fuzzy
1253 #| msgid "<primary><emphasis role=\"pkg\">xvnc4viewer</emphasis></primary>"
1254 msgid "<primary><emphasis role=\"pkg\">xtightvncviewer</emphasis></primary><seealso>VNC</seealso>"
1255 msgstr "<primary><emphasis role=\"pkg\">xvnc4viewer</emphasis></primary>"
1256
1257 #, fuzzy
1258 #| msgid "<primary><emphasis role=\"pkg\">xvnc4viewer</emphasis></primary>"
1259 msgid "<primary><emphasis role=\"pkg\">tigervnc-viewer</emphasis></primary><seealso>VNC</seealso>"
1260 msgstr "<primary><emphasis role=\"pkg\">xvnc4viewer</emphasis></primary>"
1261
1262 #, fuzzy
1263 #| msgid "When the graphical session is made available by VNC, the administrator must connect to it with a VNC client. GNOME has <command>vinagre</command> and <command>remmina</command> for that, while KDE includes <command>krdc</command> (in the menu at <menuchoice> <guimenu>K</guimenu> <guisubmenu>Internet</guisubmenu> <guimenuitem>Remote Desktop Client</guimenuitem></menuchoice>). There are other VNC clients that use the command line, such as <command>xvnc4viewer</command> in the Debian package of the same name. Once connected, the administrator can see what is going on, work on the machine remotely, and show the user how to proceed."
1264 msgid "When the graphical session is made available by VNC, the administrator must connect to it with a VNC client. GNOME has <command>vinagre</command> and <command>remmina</command> for that, while the KDE project provides <command>krdc</command> (in the menu at <menuchoice> <guimenu>K</guimenu> <guisubmenu>Internet</guisubmenu> <guimenuitem>Remote Desktop Client</guimenuitem></menuchoice>). There are other VNC clients that use the command line, such as <command>xtightvncviewer</command> from the homonym package or <command>xtigervncviewer</command> from the <emphasis role=\"pkg\">tigervnc-viewer</emphasis> Debian package. Once connected, the administrator can see what is going on, work on the machine remotely, and show the user how to proceed."
1265 msgstr "Lorsque la session graphique est rendue disponible par VNC, l'administrateur doit s'y connecter à l'aide d'un client VNC. GNOME propose pour cela <command>vinagre</command> et <command>remmina</command>, et KDE inclut <command>krdc</command> (dans le menu <menuchoice> <guimenu>K</guimenu> <guisubmenu>Internet</guisubmenu> <guimenuitem>Krdc Connexion à un bureau distant</guimenuitem></menuchoice>). Il existe aussi des clients VNC qui s'invoquent en ligne de commande, comme <command>xvnc4viewer</command>, du paquet Debian éponyme. Une fois connecté, il peut examiner ce qui se passe, voire intervenir et montrer à l'utilisateur comment procéder."
1266
1267 msgid "<emphasis>SECURITY</emphasis> VNC over SSH"
1268 msgstr "<emphasis>SÉCURITÉ</emphasis> VNC sur SSH"
1269
1270 #, fuzzy
1271 #| msgid "<primary>SSH tunnel</primary><secondary>VNC</secondary>"
1272 msgid "<primary>tunnel</primary><secondary>VNC</secondary>"
1273 msgstr "<primary>tunnel SSH</primary> <secondary>VNC</secondary>"
1274
1275 #, fuzzy
1276 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1277 msgid "<primary>SSH</primary><secondary>tunnel</secondary><tertiary>VNC</tertiary>"
1278 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1279
1280 #, fuzzy
1281 #| msgid "<primary><command>init</command></primary>"
1282 msgid "<primary><command>vncviewer</command></primary>"
1283 msgstr "<primary><command>init</command></primary>"
1284
1285 msgid "If you want to connect by VNC, and you don't want your data sent in clear text on the network, it is possible to encapsulate the data in an SSH tunnel (see <xref linkend=\"sect.ssh-port-forwarding\" />). You simply have to know that VNC uses port 5900 by default for the first screen (called “localhost:0”), 5901 for the second (called “localhost:1”), etc."
1286 msgstr "Si l'on souhaite se connecter par VNC et si on ne veut pas que les données circulent en clair sur le réseau, il est possible de les encapsuler dans un tunnel SSH (voir <xref linkend=\"sect.ssh-port-forwarding\" />). Il faut simplement savoir que VNC emploie par défaut le port 5900 pour le premier écran (appelé « localhost:0 »), 5901 pour le second (appelé « localhost:1 »), etc."
1287
1288 msgid "The <command>ssh -L localhost:5901:localhost:5900 -N -T <replaceable>machine</replaceable></command> command creates a tunnel between local port 5901 in the localhost interface and port 5900 of the <replaceable>machine</replaceable> host. The first “localhost” restricts SSH to listening to only that interface on the local machine. The second “localhost” indicates the interface on the remote machine which will receive the network traffic entering in “localhost:5901”. Thus <command>vncviewer localhost:1</command> will connect the VNC client to the remote screen, even though you indicate the name of the local machine."
1289 msgstr "La commande <command>ssh -L localhost:5901:localhost:5900 -N -T <replaceable>machine</replaceable></command> crée un tunnel entre le port local 5901 de l'interface <command>localhost</command> et le port 5900 de l'ordinateur <replaceable>machine</replaceable>. Le premier <command>localhost</command> contraint SSH à n'écouter, sur la machine locale, que sur cette interface. Le second <command>localhost</command> désigne l'interface de la machine distante à laquelle SSH communiquera le trafic réseau expédié à <literal>localhost:5901</literal>. Ainsi, <command>vncviewer localhost:1</command> connectera le client VNC à l'écran distant bien que l'on indique le nom de la machine locale."
1290
1291 msgid "When the VNC session is closed, remember to close the tunnel by also quitting the corresponding SSH session."
1292 msgstr "Une fois la session VNC terminée, il convient de ne pas oublier de fermer le tunnel en quittant la session SSH ouverte à cette fin."
1293
1294 msgid "<emphasis>BACK TO BASICS</emphasis> Display manager"
1295 msgstr "<emphasis>B.A.-BA</emphasis> Gestionnaire d'écran"
1296
1297 msgid "<primary><command>gdm3</command></primary>"
1298 msgstr "<primary><command>gdm3</command></primary>"
1299
1300 msgid "<primary><command>kdm</command></primary>"
1301 msgstr "<primary><command>kdm</command></primary>"
1302
1303 msgid "<primary><command>xdm</command></primary>"
1304 msgstr "<primary><command>xdm</command></primary>"
1305
1306 msgid "<primary><command>lightdm</command></primary>"
1307 msgstr "<primary><command>lightdm</command></primary>"
1308
1309 msgid "<primary>manager</primary><secondary>display manager</secondary>"
1310 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
1311
1312 msgid "<primary>display manager</primary>"
1313 msgstr "<primary>écran, gestionnaire de</primary>"
1314
1315 #, fuzzy
1316 #| msgid "<command>gdm3</command>, <command>kdm</command>, <command>lightdm</command>, and <command>xdm</command> are Display Managers. They take control of the graphical interface shortly after boot in order to provide the user a login screen. Once the user has logged in, they execute the programs needed to start a graphical work session."
1317 msgid "<command>gdm3</command>, <command>kdm</command>, <command>lightdm</command>, and <command>xdm</command> are Display Managers (they all provide the <emphasis role=\"pkg\">x-display-manager</emphasis> meta package). They take control of the graphical interface shortly after boot in order to provide the user a login screen. Once the user has logged in, they execute the programs needed to start a graphical work session."
1318 msgstr "<command>gdm3</command>, <command>kdm</command>, <command>lightdm</command> et <command>xdm</command> sont des gestionnaires d'écran <foreignphrase>(Display Manager)</foreignphrase>. Ils prennent le contrôle de l'interface graphique peu après son initialisation afin de proposer à l'utilisateur un écran d'identification. Une fois ce dernier authentifié, il exécute les programmes requis pour démarrer une session de travail graphique."
1319
1320 #, fuzzy
1321 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
1322 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/gdm3/daemon.conf</filename></secondary>"
1323 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
1324
1325 #, fuzzy
1326 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
1327 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/inetd.conf</filename></secondary>"
1328 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
1329
1330 msgid "Managing Rights"
1331 msgstr "Gestion des droits"
1332
1333 msgid "<primary>permissions</primary>"
1334 msgstr "<primary>permissions</primary>"
1335
1336 #, fuzzy
1337 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
1338 msgid "<primary>rights</primary><seealso>permissions</seealso>"
1339 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
1340
1341 #, fuzzy
1342 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1343 msgid "<primary>device</primary><secondary>files</secondary>"
1344 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1345
1346 msgid "Linux is definitely a multi-user system, so it is necessary to provide a permission system to control the set of authorized operations on files and directories, which includes all the system resources and devices (on a Unix system, any device is represented by a file or directory). This principle is common to all Unix systems, but a reminder is always useful, especially as there are some interesting and relatively unknown advanced uses."
1347 msgstr "Linux est résolument multi-utilisateur ; il est donc nécessaire de prévoir un système de permissions contrôlant les opérations autorisées pour chacun sur les fichiers et répertoires, recouvrant toutes les ressources du système (y compris les périphériques : sur un système Unix, tout périphérique est représenté par un fichier ou répertoire). Ce principe est commun à tous les Unix mais un rappel est toujours utile, d'autant qu'il existe quelques usages avancés méconnus et relativement intéressants."
1348
1349 #, fuzzy
1350 #| msgid "Permissions"
1351 msgid "Owners and Permissions"
1352 msgstr "Permissions"
1353
1354 msgid "<primary>user</primary><secondary>owner</secondary>"
1355 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1356
1357 msgid "<primary>group</primary><secondary>owner</secondary>"
1358 msgstr "<primary>groupe</primary><secondary>propriétaire</secondary>"
1359
1360 msgid "<primary>owner</primary><secondary>user</secondary>"
1361 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
1362
1363 msgid "<primary>owner</primary><secondary>group</secondary>"
1364 msgstr "<primary>propriétaire</primary><secondary>groupe</secondary>"
1365
1366 msgid "Each file or directory has specific permissions for three categories of users:"
1367 msgstr "Chaque fichier ou répertoire dispose de permissions spécifiques pour trois catégories d'utilisateurs :"
1368
1369 #, fuzzy
1370 #| msgid "<primary>owner</primary><secondary>user</secondary>"
1371 msgid "<primary>permissions</primary><secondary><literal>u</literal></secondary>"
1372 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
1373
1374 msgid "its owner (symbolized by <literal>u</literal> as in “user”);"
1375 msgstr "son propriétaire (symbolisé par <literal>u</literal> comme <foreignphrase>user</foreignphrase>) ;"
1376
1377 #, fuzzy
1378 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1379 msgid "<primary>permissions</primary><secondary><literal>g</literal></secondary>"
1380 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1381
1382 msgid "its owner group (symbolized by <literal>g</literal> as in “group”), representing all the members of the group;"
1383 msgstr "son groupe propriétaire (symbolisé par <literal>g</literal> comme <foreignphrase>group</foreignphrase>) — représentant tous les utilisateurs membres du groupe ;"
1384
1385 #, fuzzy
1386 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1387 msgid "<primary>permissions</primary><secondary><literal>o</literal></secondary>"
1388 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1389
1390 msgid "the others (symbolized by <literal>o</literal> as in “other”)."
1391 msgstr "les autres (symbolisés par <literal>o</literal> comme <foreignphrase>other</foreignphrase>)."
1392
1393 #, fuzzy
1394 #| msgid "Three types of rights can be combined:"
1395 msgid "Three basic types of rights can be combined:"
1396 msgstr "Trois types de droits peuvent s'y combiner :"
1397
1398 #, fuzzy
1399 #| msgid "<primary>service</primary><secondary>restart</secondary>"
1400 msgid "<primary>permissions</primary><secondary><literal>r</literal></secondary>"
1401 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
1402
1403 msgid "reading (symbolized by <literal>r</literal> as in “read”);"
1404 msgstr "lecture (symbolisé par <literal>r</literal> comme <foreignphrase>read</foreignphrase>) ;"
1405
1406 #, fuzzy
1407 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1408 msgid "<primary>permissions</primary><secondary><literal>w</literal></secondary>"
1409 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1410
1411 msgid "writing (or modifying, symbolized by <literal>w</literal> as in “write”);"
1412 msgstr "écriture (ou modification, symbolisé par <literal>w</literal> comme <foreignphrase>write</foreignphrase>) ;"
1413
1414 #, fuzzy
1415 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1416 msgid "<primary>permissions</primary><secondary><literal>x</literal></secondary>"
1417 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1418
1419 msgid "executing (symbolized by <literal>x</literal> as in “eXecute”)."
1420 msgstr "exécution (symbolisé par <literal>x</literal> comme <foreignphrase>eXecute</foreignphrase>)."
1421
1422 msgid "<primary>read, right</primary>"
1423 msgstr "<primary>lecture, droit</primary>"
1424
1425 msgid "<primary>write, right</primary>"
1426 msgstr "<primary>écriture, droit</primary>"
1427
1428 msgid "<primary>modification, right</primary>"
1429 msgstr "<primary>modification, droit</primary>"
1430
1431 msgid "<primary>execution, right</primary>"
1432 msgstr "<primary>exécution, droit</primary>"
1433
1434 #, fuzzy
1435 #| msgid "<primary>service</primary><secondary>restart</secondary>"
1436 msgid "<primary>permissions</primary><secondary>read</secondary>"
1437 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
1438
1439 #, fuzzy
1440 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1441 msgid "<primary>permissions</primary><secondary>write</secondary>"
1442 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1443
1444 #, fuzzy
1445 #| msgid "<primary>owner</primary><secondary>user</secondary>"
1446 msgid "<primary>permissions</primary><secondary>execute</secondary>"
1447 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
1448
1449 msgid "In the case of a file, these rights are easily understood: read access allows reading the content (including copying), write access allows changing it, and execute access allows you to run it (which will only work if it is a program)."
1450 msgstr "Dans le cas d'un fichier, ces droits sont faciles à interpréter : l'accès en lecture permet d'en consulter le contenu (et notamment de le copier), l'accès en écriture de le modifier et l'accès en exécution permet de tenter de l'exécuter (ce qui ne fonctionnera que s'il s'agit d'un programme)."
1451
1452 msgid "<emphasis>SECURITY</emphasis> <literal>setuid</literal> and <literal>setgid</literal> executables"
1453 msgstr "<emphasis>SÉCURITÉ</emphasis> Exécutables <literal>setuid</literal> et <literal>setgid</literal>"
1454
1455 #, fuzzy
1456 #| msgid "<emphasis>SECURITY</emphasis> <literal>setuid</literal> and <literal>setgid</literal> executables"
1457 msgid "<primary>permissions</primary><secondary><literal>setuid</literal></secondary><seealso><literal>setuid</literal></seealso>"
1458 msgstr "<emphasis>SÉCURITÉ</emphasis> Exécutables <literal>setuid</literal> et <literal>setgid</literal>"
1459
1460 #, fuzzy
1461 #| msgid "<emphasis>SECURITY</emphasis> <literal>setuid</literal> and <literal>setgid</literal> executables"
1462 msgid "<primary>permissions</primary><secondary><literal>setgid</literal></secondary><seealso><literal>setgid</literal></seealso>"
1463 msgstr "<emphasis>SÉCURITÉ</emphasis> Exécutables <literal>setuid</literal> et <literal>setgid</literal>"
1464
1465 #, fuzzy
1466 #| msgid "<primary>service</primary><secondary>restart</secondary>"
1467 msgid "<primary>permissions</primary><secondary><literal>s</literal></secondary>"
1468 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
1469
1470 #, fuzzy
1471 #| msgid "Two particular rights are relevant to executable files: <literal>setuid</literal> and <literal>setgid</literal> (symbolized with the letter “s”). Note that we frequently speak of “bit”, since each of these boolean values can be represented by a 0 or a 1. These two rights allow any user to execute the program with the rights of the owner or the group, respectively. This mechanism grants access to features requiring higher level permissions than those you would usually have."
1472 msgid "Two particular rights are relevant to executable files: <literal>setuid</literal> and <literal>setgid</literal> (symbolized with the letter “s”). Note that we frequently speak of “bit”, since each of these Boolean values can be represented by a 0 or a 1. These two rights allow any user to execute the program with the rights of its owner or its group, respectively. This mechanism grants access to features requiring higher level permissions than those you would usually have."
1473 msgstr "Deux droits particuliers concernent les fichiers exécutables : le droit <literal>setuid</literal> et le droit <literal>setgid</literal> (symbolisés par la lettre « s »). Remarquons qu'on parle souvent de « bit » car chacune de ces informations booléennes se représente individuellement par un 0 ou un 1. Ces deux droits permettent à n'importe quel utilisateur d'exécuter le programme en question avec respectivement les droits de son propriétaire ou de son groupe propriétaire. Ce mécanisme donne accès à des fonctionnalités requérant des droits plus élevés que ceux dont on dispose habituellement."
1474
1475 msgid "<primary><literal>setuid</literal>, right</primary>"
1476 msgstr "<primary><literal>setuid</literal>, droit</primary>"
1477
1478 msgid "<primary><literal>setgid</literal>, right</primary>"
1479 msgstr "<primary><literal>setgid</literal>, droit</primary>"
1480
1481 msgid "Since a <literal>setuid</literal> root program is systematically run under the super-user identity, it is very important to ensure it is secure and reliable. Indeed, a user who would manage to subvert it to call a command of their choice could then impersonate the root user and have all rights on the system."
1482 msgstr "Un programme <literal>setuid</literal> root s'exécutant systématiquement sous l'identité du super-utilisateur, il est très important d'en contrôler la fiabilité. En effet, un utilisateur capable de le détourner pour lui faire appeler une commande de son choix pourrait alors endosser l'identité de root et avoir tous les droits sur le système."
1483
1484 #, fuzzy
1485 #| msgid "<primary><command>scp</command></primary>"
1486 msgid "<primary><command>su</command></primary>"
1487 msgstr "<primary><command>scp</command></primary>"
1488
1489 #, fuzzy
1490 #| msgid "<primary><command>scp</command></primary>"
1491 msgid "<primary><command>sudo</command></primary>"
1492 msgstr "<primary><command>scp</command></primary>"
1493
1494 #, fuzzy
1495 #| msgid "<primary><command>rsh</command></primary>"
1496 msgid "<primary><command>runuser</command></primary>"
1497 msgstr "<primary><command>rsh</command></primary>"
1498
1499 msgid "If you require running a program under a different user or if a program requires higher permissions, the <command>sudo</command>, <command>su</command>, or <command>runuser</command> commands are usually better choices than using these bits (see <xref linkend=\"sect.sharing-admin-rights\" />)."
1500 msgstr ""
1501
1502 msgid "A directory is handled differently. Read access gives the right to consult the list of its entries (files and directories), write access allows creating or deleting files, and execute access allows crossing through it (especially to go there with the <command>cd</command> command). Being able to cross through a directory without being able to read it gives permission to access the entries therein that are known by name, but not to find them if you do not know their existence or their exact name."
1503 msgstr "Un répertoire est traité différemment. L'accès en lecture donne le droit de consulter la liste de ses entrées, l'accès en écriture celui d'y créer ou supprimer des fichiers et l'accès en exécution de le traverser (et notamment de s'y rendre avec la commande <command>cd</command>). Pouvoir traverser un répertoire sans le lire donne le droit d'accéder à celles de ses entrées dont on connaît le nom, mais pas de les trouver si on ignore leur existence ou leur nom exact."
1504
1505 msgid "<emphasis>SECURITY</emphasis> <literal>setgid</literal> directory and <emphasis>sticky bit</emphasis>"
1506 msgstr "<emphasis>SÉCURITÉ</emphasis> Répertoire <literal>setgid</literal> et sticky bit"
1507
1508 msgid "<primary><literal>setgid</literal> directory</primary>"
1509 msgstr "<primary><literal>setgid</literal>, répertoire</primary>"
1510
1511 msgid "The <literal>setgid</literal> bit also applies to directories. Any newly-created item in such directories is automatically assigned the owner group of the parent directory, instead of inheriting the creator's main group as usual. This setup avoids the user having to change its main group (with the <command>newgrp</command> command) when working in a file tree shared between several users of the same dedicated group."
1512 msgstr "Le bit <literal>setgid</literal> s'applique également aux répertoires. Toutes les entrées qu'on y créera recevront alors pour groupe propriétaire celui du répertoire, au lieu de prendre comme c'est l'habitude le groupe principal de leur créateur. Cela évitera à celui-ci de changer de groupe principal (par la commande <command>newgrp</command>) lors d'un travail dans une arborescence partagée entre plusieurs utilisateurs d'un même groupe dédié."
1513
1514 #, fuzzy
1515 #| msgid "<primary><command>chgrp</command></primary>"
1516 msgid "<primary><command>newgrp</command></primary>"
1517 msgstr "<primary><command>chgrp</command></primary>"
1518
1519 msgid "<primary>sticky bit</primary>"
1520 msgstr "<primary><foreignphrase>sticky bit</foreignphrase></primary>"
1521
1522 #, fuzzy
1523 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1524 msgid "<primary>permissions</primary><secondary><literal>t</literal></secondary>"
1525 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1526
1527 msgid "The “sticky” bit (symbolized by the letter “t”) is a permission that is only useful in directories. It is especially used for temporary directories where everybody has write access (such as <filename>/tmp/</filename>): it restricts deletion of files so that only their owner (or the owner of the parent directory) can do it. Lacking this, everyone could delete other users' files in <filename>/tmp/</filename>."
1528 msgstr "Le bit <literal>sticky</literal> (symbolisé par la lettre « t ») est un droit qui n'est utile que sur les répertoires. Il est notamment employé pour les répertoires temporaires ouverts en écriture à tous (comme <filename>/tmp/</filename>) : il n'autorise la suppression d'un fichier que par son propriétaire ou celui de son répertoire parent. En son absence, tout le monde pourrait supprimer les fichiers d'autrui dans <filename>/tmp/</filename>."
1529
1530 msgid "Three commands control the permissions associated with a file:"
1531 msgstr "Trois commandes manipulent les permissions associées à un fichier:"
1532
1533 msgid "<primary><command>chown</command></primary>"
1534 msgstr "<primary><command>chown</command></primary>"
1535
1536 msgid "<command>chown <replaceable>user</replaceable> <replaceable>file</replaceable></command> changes the owner of the file;"
1537 msgstr "<command>chown <replaceable>utilisateur</replaceable> <replaceable>fichier</replaceable></command> affecte un nouveau propriétaire à un fichier;"
1538
1539 msgid "<primary><command>chgrp</command></primary>"
1540 msgstr "<primary><command>chgrp</command></primary>"
1541
1542 msgid "<command>chgrp <replaceable>group</replaceable> <replaceable>file</replaceable></command> alters the owner group;"
1543 msgstr "<command>chgrp <replaceable>groupe</replaceable> <replaceable>fichier</replaceable></command> opère sur son groupe propriétaire;"
1544
1545 msgid "<primary><command>chmod</command></primary>"
1546 msgstr "<primary><command>chmod</command></primary>"
1547
1548 msgid "<command>chmod <replaceable>rights</replaceable> <replaceable>file</replaceable></command> changes the permissions for the file."
1549 msgstr "<command>chmod <replaceable>droits</replaceable> <replaceable>fichier</replaceable></command> intervient sur ses droits."
1550
1551 #, fuzzy
1552 #| msgid "<primary>octal representation of rights</primary>"
1553 msgid "<primary>symbolic representation of rights</primary>"
1554 msgstr "<primary>octale, représentation des droits</primary>"
1555
1556 #, fuzzy
1557 #| msgid "<primary>rights</primary><secondary>octal representation</secondary>"
1558 msgid "<primary>rights</primary><secondary>symbolic representation</secondary>"
1559 msgstr "<primary>droits</primary><secondary>représentation octale</secondary>"
1560
1561 #, fuzzy
1562 #| msgid "<primary>rights</primary><secondary>octal representation</secondary>"
1563 msgid "<primary>permissions</primary><secondary>symbolic representation</secondary>"
1564 msgstr "<primary>droits</primary><secondary>représentation octale</secondary>"
1565
1566 msgid "There are two ways of presenting rights. Among them, the symbolic representation is probably the easiest to understand and remember. It involves the letter symbols mentioned above. You can define rights for each category of users (<literal>u</literal>/<literal>g</literal>/<literal>o</literal>), by setting them explicitly (with <literal>=</literal>), by adding (<literal>+</literal>), or subtracting (<literal>-</literal>). Thus the <literal>u=rwx,g+rw,o-r</literal> formula gives the owner read, write, and execute rights, adds read and write rights for the owner group, and removes read rights for other users. Rights not altered by the addition or subtraction in such a command remain unmodified. The letter <literal>a</literal>, for “all”, covers all three categories of users, so that <literal>a=rx</literal> grants all three categories the same rights (read and execute, but not write)."
1567 msgstr "Il existe deux manières de présenter les droits ; parmi elles, la représentation symbolique, sans doute la plus simple à comprendre et mémoriser, met en jeu les lettres symboles déjà citées. Pour chaque catégorie d'utilisateurs (<literal>u</literal>/<literal>g</literal>/<literal>o</literal>), on peut définir les droits (<literal>=</literal>), en ajouter (<literal>+</literal>), ou en retrancher (<literal>-</literal>). Ainsi, la formule <literal>u=rwx,g+rw,o-r</literal> donne au propriétaire les droits de lecture, d'écriture et d'exécution ; ajoute au groupe propriétaire les droits de lecture et d'écriture ; et supprime le droit de lecture aux autres utilisateurs. Les droits non concernés par les opérations d'ajout ou de retranchement restent inchangés. La lettre <literal>a</literal>, pour <foreignphrase>all</foreignphrase>, recouvre les trois catégories d'utilisateurs, de sorte que <literal>a=rx</literal> donne aux trois catégories les mêmes droits (lecture et exécution, mais pas écriture)."
1568
1569 msgid "<primary>octal representation of rights</primary>"
1570 msgstr "<primary>octale, représentation des droits</primary>"
1571
1572 msgid "<primary>rights</primary><secondary>octal representation</secondary>"
1573 msgstr "<primary>droits</primary><secondary>représentation octale</secondary>"
1574
1575 #, fuzzy
1576 #| msgid "<primary>rights</primary><secondary>octal representation</secondary>"
1577 msgid "<primary>permissions</primary><secondary>octal representation</secondary>"
1578 msgstr "<primary>droits</primary><secondary>représentation octale</secondary>"
1579
1580 msgid "The (octal) numeric representation associates each right with a value: 4 for read, 2 for write, and 1 for execute. We associate each combination of rights with the sum of the figures. Each value is then assigned to different categories of users by putting them end to end in the usual order (owner, group, others)."
1581 msgstr "La représentation numérique octale associe chaque droit à une valeur : 4 pour la lecture, 2 pour l'écriture et 1 pour l'exécution. On associe à chaque combinaison de droits la somme de ces chiffres, valeurs qu'on attribue ensuite aux différentes catégories d'utilisateurs en les mettant bout à bout dans l'ordre habituel (propriétaire, groupe, autres)."
1582
1583 #, fuzzy
1584 #| msgid "For instance, the <command>chmod 754 <replaceable>file</replaceable></command> command will set the following rights: read, write and execute for the owner (since 7 = 4 + 2 + 1); read and execute for the group (since 5 = 4 + 1); read-only for others. The <literal>0</literal> means no rights; thus <command>chmod 600 <replaceable>file</replaceable></command> allows for read/write rights for the owner, and no rights for anyone else. The most frequent right combinations are <literal>755</literal> for executable files and directories, and <literal>644</literal> for data files."
1585 msgid "For instance, the <command>chmod 754 <replaceable>file</replaceable></command> command will set the following rights: read, write and execute for the owner (since 7 = 4 + 2 + 1); read and execute for the group (since 5 = 4 + 1); read-only for others. The <literal>0</literal> (zero) means no rights; thus <command>chmod 600 <replaceable>file</replaceable></command> allows for read/write rights for the owner, and no rights for anyone else. The most frequent right combinations are <literal>755</literal> for executable files and directories, and <literal>644</literal> for data files."
1586 msgstr "La commande <command>chmod 754 <replaceable>fichier</replaceable></command> mettra donc en place les droits suivants : lecture, écriture et exécution au propriétaire (car 7 = 4 + 2 + 1) ; lecture et exécution au groupe (car 5 = 4 + 1) ; lecture seule aux autres. Le chiffre <literal>0</literal> correspond à l'absence de droits, ainsi <command>chmod 600 <replaceable>fichier</replaceable></command> ne donne que les droits de lecture/écriture au propriétaire, les autres ne pouvant rien faire du tout. Les droits les plus fréquents sont <literal>755</literal> pour les exécutables ou les répertoires et <literal>644</literal> pour les fichiers de données."
1587
1588 #, fuzzy
1589 #| msgid "<primary><literal>setuid</literal>, right</primary>"
1590 msgid "<primary><literal>setuid</literal></primary>"
1591 msgstr "<primary><literal>setuid</literal>, droit</primary>"
1592
1593 #, fuzzy
1594 #| msgid "<primary><literal>setgid</literal>, right</primary>"
1595 msgid "<primary><literal>setgid</literal></primary>"
1596 msgstr "<primary><literal>setgid</literal>, droit</primary>"
1597
1598 msgid "To represent special rights, you can prefix a fourth digit to this number according to the same principle, where the <literal>setuid</literal>, <literal>setgid</literal> and <literal>sticky</literal> bits are 4, 2 and 1, respectively. <command>chmod 4754</command> will associate the <literal>setuid</literal> bit with the previously described rights."
1599 msgstr "Pour représenter le cas échéant les droits spéciaux, on pourra préfixer à ce nombre un quatrième chiffre selon le même principe, sachant que les bits <literal>setuid</literal>, <literal>setgid</literal> et <literal>sticky</literal> valent respectivement 4, 2 et 1. <command>chmod 4754</command> associera donc le bit <literal>setuid</literal> aux droits décrits précédemment."
1600
1601 msgid "Note that the use of octal notation only allows to set all the rights at once on a file; you cannot use it to simply add a new right, such as read access for the group owner, since you must take into account the existing rights and compute the new corresponding numerical value."
1602 msgstr "On notera que l'utilisation de la notation numérique octale ne permet que de modifier en bloc l'ensemble des droits sur un fichier ; on ne peut pas l'utiliser pour se contenter d'ajouter par exemple le droit en lecture pour le groupe propriétaire, puisqu'il faut obligatoirement prendre en compte les droits existants et calculer la nouvelle valeur numérique correspondante."
1603
1604 msgid "<emphasis>TIP</emphasis> Recursive operation"
1605 msgstr "<emphasis>ASTUCE</emphasis> Application récursive"
1606
1607 #, fuzzy
1608 #| msgid "<primary>rights</primary><secondary>octal representation</secondary>"
1609 msgid "<primary>permissions</primary><secondary>recursive operation</secondary>"
1610 msgstr "<primary>droits</primary><secondary>représentation octale</secondary>"
1611
1612 msgid "Sometimes we have to change rights for an entire file tree. All the commands above have a <literal>-R</literal> option to operate recursively in sub-directories."
1613 msgstr "Il arrive que l'on doive changer les permissions de toute une arborescence. Toutes les commandes décrites disposent donc d'une option <literal>-R</literal>, effectuant l'opération demandée de manière récursive."
1614
1615 #, fuzzy
1616 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1617 msgid "<primary>permissions</primary><secondary><literal>X</literal></secondary>"
1618 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1619
1620 #, fuzzy
1621 #| msgid "The distinction between directories and files sometimes causes problems with recursive operations. That is why the “X” letter has been introduced in the symbolic representation of rights. It represents a right to execute which applies only to directories (and not to files lacking this right). Thus, <command>chmod -R a+X <replaceable>directory</replaceable></command> will only add execute rights for all categories of users (<literal>a</literal>) for all of the sub-directories and files for which at least one category of user (even if their sole owner) already has execute rights."
1622 msgid "The distinction between directories and files sometimes causes problems with recursive operations. That is why the “<literal>X</literal>” letter has been introduced in the symbolic representation of rights. It also represents the right to execute, but it applies differently to directories and files."
1623 msgstr "La distinction entre répertoires et fichiers pose souvent problème lors des opérations récursives. C'est la raison de l'introduction de la lettre « X » dans la représentation symbolique des droits. Elle représente un droit d'exécution qui ne concerne que les répertoires (mais pas les fichiers ne disposant pas encore de ce droit). Ainsi, <command>chmod -R a+X <replaceable>répertoire</replaceable></command> n'ajoutera les droits d'exécution pour toutes les catégories d'utilisateurs (<literal>a</literal>) qu'à tous les sous-répertoires et aux fichiers sur lesquels au moins une catégorie d'utilisateurs (ne serait-ce que leur seul propriétaire) a déjà les droits d'exécution."
1624
1625 msgid "For directories it adds executable permissions to the chosen user(s). For files, it adds the executable bit <emphasis>only</emphasis> if at least one of the users (owner, group, or others) already has executable permissions. Let's demonstrate it, because this bit can be confusing:"
1626 msgstr ""
1627
1628 msgid ""
1629 "<computeroutput>$ </computeroutput><userinput>ls test.txt</userinput>\n"
1630 " <computeroutput>-rw-r--r-- 1 daniel daniel 0 18. Nov 01:07 test.txt</computeroutput>\n"
1631 " <computeroutput>$ </computeroutput><userinput>chmod u+X test.txt</userinput>\n"
1632 " <computeroutput>$ </computeroutput><userinput>ls test.txt</userinput>\n"
1633 " <computeroutput>-rw-r--r-- 1 daniel daniel 0 18. Nov 01:07 test.txt</computeroutput>\n"
1634 " <computeroutput>$ </computeroutput><userinput>chmod o+x test.txt</userinput>\n"
1635 " <computeroutput>$ </computeroutput><userinput>ls test.txt</userinput>\n"
1636 " <computeroutput>-rw-r--r-x 1 daniel daniel 0 18. Nov 01:07 test.txt</computeroutput>\n"
1637 " <computeroutput>$ </computeroutput><userinput>chmod u+X test.txt</userinput>\n"
1638 " <computeroutput>$ </computeroutput><userinput>ls test.txt</userinput>\n"
1639 " <computeroutput>-rwxr--r-x 1 daniel daniel 0 18. Nov 01:07 test.txt</computeroutput>\n"
1640 " "
1641 msgstr ""
1642
1643 msgid "The example shows a typical file with its default permissions: its owner can read and write it, the owner's group and all other users can read it. The next operation (<literal>u+X</literal>) won't add executable permissions for the owner of the file, because permissions to execute have not been assigned. The operation has no effect on the file. Next we assign execute rights for \"other\" users and repeat the operation. This time it is successful, because at least one user group already had executable permissions."
1644 msgstr ""
1645
1646 msgid "It is a misconception that this bit will only affect directories. If files and directories have mixed permissions, it is often a good idea to use the <command>find</command> command to locate the targets you want to operate on."
1647 msgstr ""
1648
1649 #, fuzzy
1650 #| msgid "<emphasis>TIP</emphasis> Changing the user and group"
1651 msgid "<emphasis>TIP</emphasis> Changing the user and group together"
1652 msgstr "<emphasis>ASTUCE</emphasis> Changer l'utilisateur et le groupe"
1653
1654 #, fuzzy
1655 #| msgid "Frequently you want to change the group of a file at the same time that you change the owner. The <command>chown</command> command has a special syntax for that: <command>chown <replaceable>user</replaceable>:<replaceable>group</replaceable> <replaceable>file</replaceable></command>"
1656 msgid "Frequently you want to change the group of a file at the same time that you change the owner. The <command>chown</command> command has a special syntax for that: <command>chown <replaceable>user</replaceable>:<replaceable>group</replaceable> <replaceable>file</replaceable></command>. This syntax can also be used to recursively (<literal>-R</literal>) change the ownership of a whole directory."
1657 msgstr "On souhaite souvent changer le groupe d'un fichier en même temps qu'on change celui-ci de propriétaire. La commande <command>chown</command> propose donc une syntaxe spéciale pour cela : <command>chown <replaceable>utilisateur</replaceable>:<replaceable>groupe</replaceable> <replaceable>fichier</replaceable></command>"
1658
1659 msgid "<emphasis>GOING FURTHER</emphasis> <command>umask</command>"
1660 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> <command>umask</command>"
1661
1662 #, fuzzy
1663 #| msgid "<primary><command>at</command></primary>"
1664 msgid "<primary><command>umask</command></primary>"
1665 msgstr "<primary><command>at</command></primary>"
1666
1667 #, fuzzy
1668 #| msgid "When an application creates a file, it assigns indicative permissions, knowing that the system automatically removes certain rights, given by the command <command>umask</command>. Enter <command>umask</command> in a shell; you will see a mask such as <computeroutput>0022</computeroutput>. This is simply an octal representation of the rights to be systematically removed (in this case, the write right for the group and other users)."
1669 msgid "When an application creates a file, it assigns indicative permissions, knowing that the system automatically removes certain rights, given by the command <command>umask</command>. Enter <command>umask</command> in a shell; you will see a mask such as <computeroutput>0022</computeroutput>. This is simply an octal representation of the rights to be systematically removed. In this case, the write right for the group and other users: With the above umask value, the default for directories <literal>777</literal> becomes <literal>755</literal> and the default permissions for files <literal>666</literal> become <literal>644</literal>."
1670 msgstr "Lorsqu'une application crée un fichier, elle lui donne des permissions indicatives, sachant que le système retire automatiquement certains droits, donnés par la commande <command>umask</command>. Saisissez <command>umask</command> dans un shell ; vous observerez un masque tel que <computeroutput>0022</computeroutput>. Ce n'est qu'une représentation octale des droits à retirer systématiquement (en l'occurrence, les droits en écriture pour le groupe et les autres utilisateurs)."
1671
1672 msgid "<primary>rights</primary><secondary>mask</secondary>"
1673 msgstr "<primary>droits</primary><secondary>masque</secondary>"
1674
1675 #, fuzzy
1676 #| msgid "<primary>rights</primary><secondary>mask</secondary>"
1677 msgid "<primary>permissions</primary><secondary>umask</secondary>"
1678 msgstr "<primary>droits</primary><secondary>masque</secondary>"
1679
1680 msgid "<primary>mask</primary><secondary>rights mask</secondary>"
1681 msgstr "<primary>masque</primary><secondary>masque de droits</secondary>"
1682
1683 #, fuzzy
1684 #| msgid "All these details are documented in the <citerefentry><refentrytitle>crontab</refentrytitle> <manvolnum>5</manvolnum></citerefentry> man page."
1685 msgid "The system's default value is handled by <citerefentry><refentrytitle>pam_umask</refentrytitle> <manvolnum>8</manvolnum></citerefentry> and <filename>/etc/login.defs</filename>."
1686 msgstr "Tous les détails sont documentés dans la page de manuel <citerefentry><refentrytitle>crontab</refentrytitle> <manvolnum>5</manvolnum></citerefentry>."
1687
1688 #, fuzzy
1689 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1690 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/login.defs</filename></secondary>"
1691 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1692
1693 #, fuzzy
1694 #| msgid "If you give it a new octal value, the <command>umask</command> command modifies the mask. Used in a shell initialization file (for example, <filename>~/.bash_profile</filename>), it will effectively change the default mask for your work sessions."
1695 msgid "If you give it a new octal value, the <command>umask</command> command modifies the mask. Used in a shell initialization file (for example, <filename>~/.bashrc</filename> or <filename>~/.profile</filename>), it will effectively change the default mask for your work sessions."
1696 msgstr "Si on lui passe une nouvelle valeur octale, la commande <command>umask</command> permet également de changer de masque. Employée dans un fichier d'initialisation de l'interpréteur de commandes (par exemple <filename>~/.bash_profile</filename>), elle aura pour effet de changer le masque par défaut de vos sessions de travail."
1697
1698 msgid "ACLs - Access Control Lists"
1699 msgstr ""
1700
1701 #, fuzzy
1702 #| msgid "<primary>ACPI</primary>"
1703 msgid "<primary>ACL</primary>"
1704 msgstr "<primary>ACPI</primary>"
1705
1706 #, fuzzy
1707 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
1708 msgid "<primary>Access Control List</primary><see>ACL</see>"
1709 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
1710
1711 #, fuzzy
1712 #| msgid "<primary><emphasis role=\"pkg\">krdc</emphasis></primary>"
1713 msgid "<primary><emphasis role=\"pkg\">acl</emphasis></primary>"
1714 msgstr "<primary><emphasis role=\"pkg\">krdc</emphasis></primary>"
1715
1716 msgid "Many filesystems, e.g. Btrfs, Ext3, Ext4, JFS, XFS, etc., support the use of Access Control Lists (ACLs). These extend the basic features of file ownership and permission, described in the previous section, and allow for a more fine-grained control of each (file) object. For example: A user wants to share a file with another user and that user should only be able to read the file, but not write or change it."
1717 msgstr ""
1718
1719 #, fuzzy
1720 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
1721 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/fstab</filename></secondary>"
1722 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
1723
1724 #, fuzzy
1725 #| msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
1726 msgid "<primary>ACL</primary><secondary><literal>acl</literal></secondary>"
1727 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
1728
1729 #, fuzzy
1730 #| msgid "<primary>user</primary><secondary>owner</secondary>"
1731 msgid "<primary>ACL</primary><secondary><literal>noacl</literal></secondary>"
1732 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
1733
1734 msgid "For some of the filesystems, the usage of ACLs is enabled by default (e.g. Btrfs, Ext3, Ext4). For other filesystems or older systems it must be enabled using the <literal>acl</literal> mount option - either in the <command>mount</command> command directly or in <filename>/etc/fstab</filename>. In the same way the usage of ACLs can be disabled by using the <literal>noacl</literal> mount option. For Ext* filesystems one can also use the <command>tune2fs -o [no]acl /dev/<replaceable>device</replaceable></command> command to enable/disable the usage of ACLs by default. The default values for each filesystem can usually be found in their homonym manual pages in section 5 (<citerefentry><refentrytitle><replaceable>filesystem</replaceable></refentrytitle> <manvolnum>5</manvolnum></citerefentry>) or in <citerefentry><refentrytitle>mount</refentrytitle> <manvolnum>8</manvolnum></citerefentry>."
1735 msgstr ""
1736
1737 msgid "After enabling ACLs, permissions can be set using the <citerefentry><refentrytitle>setfacl</refentrytitle> <manvolnum>1</manvolnum></citerefentry> command, while <citerefentry><refentrytitle>getfacl</refentrytitle> <manvolnum>1</manvolnum></citerefentry> allows one to retrieve the ACLs for a given object or path. These commands are part of the <emphasis role=\"pkg\">acl</emphasis> package. With <command>setfacl</command> one can also configure newly created files or directories to inherit permissions from the parent directory. It is important to note that ACLs are processed in their order and that an earlier entry that fits the situation has precedence over later entries."
1738 msgstr ""
1739
1740 msgid "If a file has ACLs set, the output of the <command>ls -l</command> command will show a plus-sign after the traditional permissions. When using ACLs, the <command>chmod</command> command behaves slightly different, and <command>umask</command> might be ignored. The extensive documentation, e.g. <citerefentry><refentrytitle>acl</refentrytitle> <manvolnum>5</manvolnum></citerefentry> contains more information."
1741 msgstr ""
1742
1743 msgid "Administration Interfaces"
1744 msgstr "Interfaces d'administration"
1745
1746 msgid "<primary>interface</primary><secondary>administration interface</secondary>"
1747 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
1748
1749 msgid "<primary>administration, interfaces</primary>"
1750 msgstr "<primary>administration, interfaces</primary>"
1751
1752 msgid "Using a graphical interface for administration is interesting in various circumstances. An administrator does not necessarily know all the configuration details for all their services, and doesn't always have the time to go seeking out the documentation on the matter. A graphical interface for administration can thus accelerate the deployment of a new service. It can also simplify the setup of services which are hard to configure."
1753 msgstr "Recourir à une interface graphique d'administration est intéressant dans différentes circonstances. Un administrateur ne connaît pas nécessairement tous les détails de configuration de tous ses services et n'a pas forcément le temps de se documenter à leur sujet. Une interface graphique d'administration accélérera donc le déploiement d'un nouveau service. Par ailleurs, elle pourra simplifier la mise en place des réglages des services les plus pénibles à configurer."
1754
1755 msgid "Such an interface is only an aid, and not an end in itself. In all cases, the administrator must master its behavior in order to understand and work around any potential problem."
1756 msgstr "Une telle interface n'est qu'une aide, pas une fin en soi. Dans tous les cas, l'administrateur devra maîtriser son comportement pour comprendre et contourner tout problème éventuel."
1757
1758 msgid "Since no interface is perfect, you may be tempted to try several solutions. This is to be avoided as much as possible, since different tools are sometimes incompatible in their work methods. Even if they all aim to be very flexible and try to adopt the configuration file as a single reference, they are not always able to integrate external changes."
1759 msgstr "Aucune interface n'étant parfaite, on est par ailleurs tenté de recourir à plusieurs solutions. C'est à éviter dans la mesure du possible, car les différents outils sont parfois incompatibles de par leurs hypothèses de travail. Même si tous visent une grande souplesse et tentent d'adopter comme unique référence le fichier de configuration, ils ne sont pas toujours capables d'intégrer des modifications externes."
1760
1761 msgid "Administrating on a Web Interface: <command>webmin</command>"
1762 msgstr "Administrer sur interface web : <command>webmin</command>"
1763
1764 msgid "<primary><emphasis>webmin</emphasis></primary>"
1765 msgstr "<primary><emphasis>webmin</emphasis></primary>"
1766
1767 #, fuzzy
1768 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
1769 msgid "<primary>administration, interfaces</primary><secondary><emphasis>webmin</emphasis></secondary>"
1770 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
1771
1772 msgid "This is, without a doubt, one of the most successful administration interfaces. It is a modular system managed through a web browser, covering a wide array of areas and tools. Furthermore, it is internationalized and available in many languages."
1773 msgstr "C'est sans doute l'une des interfaces d'administration les plus abouties. Il s'agit d'un système modulaire fonctionnant dans un navigateur web, couvrant une vaste palette de domaines et d'outils. Par ailleurs, il est internationalisé et relativement bien traduit en français."
1774
1775 msgid "Webmin dashboard"
1776 msgstr "Tableau de bord Webmin"
1777
1778 #, fuzzy
1779 #| msgid "Sadly, <command>webmin</command> is no longer part of Debian. Its Debian maintainer — Jaldhar H. Vyas — removed the packages he created because he no longer had the time required to maintain them at an acceptable quality level. Nobody has officially taken over, so <emphasis role=\"distribution\">Jessie</emphasis> does not have the <command>webmin</command> package."
1780 msgid "Sadly, <command>webmin</command> is no longer part of Debian. Its Debian maintainer removed the packages created because they no longer had the time required to maintain them at an acceptable quality level. Nobody has officially taken over, so Debian does not provide the <command>webmin</command> package."
1781 msgstr "Malheureusement, <command>webmin</command> ne fait plus partie de Debian. Le responsable des paquets <emphasis role=\"pkg\">webmin</emphasis> et assimilés (ainsi d'ailleurs que des paquets <emphasis role=\"pkg\">usermin</emphasis>), Jaldhar H. Vyas, a en effet demandé leur suppression, faute de temps pour les maintenir à un niveau de qualité acceptable. Personne n'ayant officiellement pris le relais, <emphasis role=\"distribution\">Jessie</emphasis> ne dispose donc pas de paquets de <command>webmin</command>."
1782
1783 msgid "There is, however, an unofficial package distributed on the <literal>webmin.com</literal> website. Contrary to the original Debian packages, this package is monolithic; all of its configuration modules are installed and activated by default, even if the corresponding service is not installed on the machine."
1784 msgstr "Il existe toutefois un paquet non officiel, distribué sur le site <literal>webmin.com</literal>. Contrairement aux paquets initialement présents dans Debian, ce dernier est monolithique : tous les modules de configuration sont installés et activés par défaut même si le service correspondant n'est pas installé sur la machine."
1785
1786 msgid "<emphasis>SECURITY</emphasis> Changing the root password"
1787 msgstr "<emphasis>SÉCURITÉ</emphasis> Mot de passe root"
1788
1789 #, fuzzy
1790 #| msgid "On the first login, identification is conducted with the root username and its usual password. It is recommended to change the password used for <command>webmin</command> as soon as possible, so that if it is compromised, the root password for the server will not be involved, even if this confers important administrative rights to the machine."
1791 msgid "On the first login, identification is conducted with the root username and its usual password (or any user's login credentials which belongs to the <literal>sudo</literal> group). It is recommended to change the password used for <command>webmin</command> as soon as possible, so that if it is compromised, the server's user accounts will not be involved, even if this confers important administrative rights to the machine."
1792 msgstr "À la première connexion, l'identification s'effectue avec l'identifiant root et son mot de passe habituel. Il est cependant recommandé de changer dès que possible le mot de passe employé pour <command>webmin</command> ; ainsi, une compromission de celui-ci n'impliquera pas le mot de passe de root, même si elle confère des droits administratifs importants sur la machine."
1793
1794 #, fuzzy
1795 #| msgid "Beware! Since <command>webmin</command> has so many features, a malicious user accessing it could compromise the security of the entire system. In general, interfaces of this kind are not recommended for important systems with strong security constraints (firewall, sensitive servers, etc.)."
1796 msgid "Beware! Since <command>webmin</command> has so many features, a malicious user accessing it could compromise the security of the entire system. In general, interfaces of this kind are not recommended for important systems with strong security constraints (firewall, sensitive servers, etc.), and they are not recommended to be exposed to the public either."
1797 msgstr "Attention ! <command>webmin</command> étant fonctionnellement très riche, un utilisateur malveillant y accédant pourra vraisemblablement compromettre la sécurité de tout le système. D'une manière générale, les interfaces de ce type sont déconseillées sur les systèmes importants, aux contraintes de sécurité élevées (pare-feu, serveurs sensibles, etc.)."
1798
1799 msgid "Webmin is used through a web interface, but it does not require Apache to be installed. Essentially, this software has its own integrated mini web server. This server listens by default on port 10000 and accepts secure HTTP connections."
1800 msgstr "Webmin s'emploie par le biais d'une interface web mais il ne nécessite pas pour autant d'avoir Apache installé : en effet, ce logiciel dispose d'un mini-serveur web dédié. Ce dernier écoute par défaut sur le port 10 000 et accepte les connexions HTTP sécurisées."
1801
1802 msgid "Included modules cover a wide variety of services, among which:"
1803 msgstr "Les modules intégrés couvrent une large palette de services, citons notamment :"
1804
1805 #, fuzzy
1806 #| msgid "all base services: creation of users and groups, management of <filename>crontab</filename> files, init scripts, viewing of logs, etc."
1807 msgid "all base services: creation of users and groups, management of <filename>crontab</filename> files, service scripts/files, viewing of logs, etc."
1808 msgstr "tous les services de base : créer des utilisateurs et des groupes, gérer les fichiers <filename>crontab</filename>, les scripts d'initialisation, consulter les logs, etc."
1809
1810 msgid "bind: DNS server configuration (name service);"
1811 msgstr "bind : configuration du serveur DNS (service de noms) ;"
1812
1813 msgid "postfix: SMTP server configuration (e-mail);"
1814 msgstr "postfix : configuration du serveur SMTP (courrier électronique) ;"
1815
1816 #, fuzzy
1817 #| msgid "inetd: configuration of the <command>inetd</command> super-server;"
1818 msgid "network services: configuration of the <command>xinetd</command> super-server;"
1819 msgstr "inetd : configuration du super-serveur <command>inetd</command> ;"
1820
1821 #, fuzzy
1822 #| msgid "quota: user quota management;"
1823 msgid "disk quota: user quota management;"
1824 msgstr "quota : gestion des quotas utilisateur ;"
1825
1826 msgid "dhcpd: DHCP server configuration;"
1827 msgstr "dhcpd : configuration du serveur DHCP ;"
1828
1829 msgid "proftpd: FTP server configuration;"
1830 msgstr "proftpd : configuration du serveur FTP ;"
1831
1832 msgid "samba: Samba file server configuration;"
1833 msgstr "samba : configuration du serveur de fichiers Samba ;"
1834
1835 msgid "software: installation or removal of software from Debian packages and system updates."
1836 msgstr "software : installation ou suppression de logiciels à partir des paquets Debian et mise à jour du système."
1837
1838 msgid "The administration interface is available in a web browser at <literal>https://localhost:10000</literal>. Beware! Not all the modules are directly usable. Sometimes they must be configured by specifying the locations of the corresponding configuration files and some executable files (program). Frequently the system will politely prompt you when it fails to activate a requested module."
1839 msgstr "L'interface d'administration est accessible depuis un navigateur web à l'adresse <literal>https://localhost:10000</literal>. Attention ! tous les modules ne sont pas directement exploitables ; il faut parfois les configurer en précisant les emplacements du fichier de configuration concerné et de quelques exécutables. Souvent, le système vous y invite poliment lorsqu'il n'arrive pas à faire fonctionner le module demandé."
1840
1841 msgid "<emphasis>ALTERNATIVE</emphasis> GNOME control center"
1842 msgstr "<emphasis>ALTERNATIVE</emphasis> Le panneau de contrôle de GNOME"
1843
1844 msgid "<primary><emphasis role=\"pkg\">gnome-control-center</emphasis></primary>"
1845 msgstr "<primary><emphasis role=\"pkg\">gnome-control-center</emphasis></primary>"
1846
1847 msgid "The GNOME project also provides multiple administration interfaces that are usually accessible via the “Settings” entry in the user menu on the top right. <command>gnome-control-center</command> is the main program that brings them all together but many of the system wide configuration tools are effectively provided by other packages (<emphasis role=\"pkg\">accountsservice</emphasis>, <emphasis role=\"pkg\">system-config-printer</emphasis>, etc.). Although they are easy to use, these applications cover only a limited number of base services: user management, time configuration, network configuration, printer configuration, and so on."
1848 msgstr "Le projet GNOME fournit également plusieurs interfaces d'administration, généralement accessibles via l'entrée « Paramètres système » du menu utilisateur en haut à droite de l'écran. <command>gnome-control-center</command> est l'outil principal qui les rassemble, mais beaucoup des outils de configuration du système lui-même sont en réalité fournis par d'autres paquets (<emphasis role=\"pkg\">accountsservice</emphasis>, <emphasis role=\"pkg\">system-config-printer</emphasis>, etc.). Même si ces applications sont faciles d'usage, elles ne couvrent qu'une petite partie des services de base : gestion des utilisateurs, configuration de l'horloge, du réseau, des imprimantes, etc."
1849
1850 msgid "Configuring Packages: <command>debconf</command>"
1851 msgstr "Configuration des paquets : <command>debconf</command>"
1852
1853 #, fuzzy
1854 #| msgid "<primary><command>dpkg-reconfigure</command></primary>"
1855 msgid "<primary><command>debconf</command></primary><seealso><command>dpkg-reconfigure</command></seealso>"
1856 msgstr "<primary><command>dpkg-reconfigure</command></primary>"
1857
1858 #, fuzzy
1859 #| msgid "<primary><command>dpkg-reconfigure</command></primary>"
1860 msgid "<primary><command>dpkg-reconfigure</command></primary><seealso><command>debconf</command></seealso>"
1861 msgstr "<primary><command>dpkg-reconfigure</command></primary>"
1862
1863 #, fuzzy
1864 #| msgid "Many packages are automatically configured after asking a few questions during installation through the Debconf tool. These packages can be reconfigured by running <command>dpkg-reconfigure <replaceable>package</replaceable></command>."
1865 msgid "Many packages are automatically configured after asking a few questions during installation through the Debconf tool. These packages can be reconfigured by running <command>dpkg-reconfigure -p<replaceable>level</replaceable> <replaceable>package</replaceable></command>."
1866 msgstr "De nombreux paquets s'autoconfigurent après avoir demandé quelques éléments durant l'installation, questions posées à travers l'outil Debconf. On peut reconfigurer ces paquets en exécutant <command>dpkg-reconfigure <replaceable>paquet</replaceable></command>."
1867
1868 msgid "For most cases, these settings are very simple; only a few important variables in the configuration file are changed. These variables are often grouped between two “demarcation” lines so that reconfiguration of the package only impacts the enclosed area. In other cases, reconfiguration will not change anything if the script detects a manual modification of the configuration file, in order to preserve these human interventions (because the script can't ensure that its own modifications will not disrupt the existing settings)."
1869 msgstr "Dans la plupart des cas, ces réglages sont très simples : seules quelques variables importantes du fichier de configuration sont modifiées. Ces variables sont parfois regroupées entre deux lignes « démarcatrices » de sorte qu'une reconfiguration du paquet limite sa portée sur la zone qu'elles délimitent. Dans d'autres cas, une reconfiguration ne changera rien si le script détecte une modification manuelle du fichier de configuration, l'objectif étant bien évidemment de préserver ces interventions humaines (le script se considère alors incapable d'assurer que ses propres modifications ne perturberont pas l'existant)."
1870
1871 msgid "<emphasis>DEBIAN POLICY</emphasis> Preserving changes"
1872 msgstr "<emphasis>CHARTE DEBIAN</emphasis> Préserver les modifications"
1873
1874 #, fuzzy
1875 #| msgid "<primary>backup</primary><secondary>copy</secondary>"
1876 msgid "<primary>Debian Project</primary><secondary>policy</secondary>"
1877 msgstr "<primary>sauvegarde</primary><secondary>copie</secondary>"
1878
1879 #, fuzzy
1880 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1881 msgid "<primary>configuration</primary><secondary>files</secondary>"
1882 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1883
1884 msgid "The Debian Policy expressly stipulates that everything should be done to preserve manual changes made to a configuration file, so more and more scripts take precautions when editing configuration files. The general principle is simple: the script will only make changes if it knows the status of the configuration file, which is verified by comparing the checksum of the file against that of the last automatically generated file. If they are the same, the script is authorized to change the configuration file. Otherwise, it determines that the file has been changed and asks what action it should take (install the new file, save the old file, or try to integrate the new changes with the existing file). This precautionary principle has long been unique to Debian, but other distributions have gradually begun to embrace it."
1885 msgstr "La charte Debian demandant expressément de tout faire pour préserver au maximum les changements manuels apportés aux fichiers de configuration, de plus en plus de scripts modifiant ces derniers prennent des précautions. Le principe général est simple : le script n'effectue des modifications que s'il connaît l'état du fichier de configuration, vérification effectuée par comparaison de la somme de contrôle du fichier avec celle du dernier fichier produit automatiquement. Si elles correspondent, le script s'autorise à modifier le fichier de configuration. Dans le cas contraire, il considère qu'on y est intervenu et demande quelle action il doit effectuer (installer le nouveau fichier, conserver l'ancien, ou tenter d'intégrer les nouvelles modifications au fichier existant). Ce principe de précaution fut longtemps propre à Debian, mais les autres distributions l'embrassent peu à peu."
1886
1887 msgid "<primary><command>ucf</command></primary>"
1888 msgstr "<primary><command>ucf</command></primary>"
1889
1890 msgid "The <command>ucf</command> program (from the Debian package of the same name) can be used to implement such a behavior."
1891 msgstr "Le programme <command>ucf</command> (du paquet Debian éponyme) offre des facilités pour gérer cela."
1892
1893 msgid "<command>syslog</command> System Events"
1894 msgstr "Les événements système de <command>syslog</command>"
1895
1896 msgid "<primary><command>rsyslogd</command></primary>"
1897 msgstr "<primary><command>rsyslogd</command></primary>"
1898
1899 #, fuzzy
1900 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1901 msgid "<primary>file</primary><secondary>log file</secondary>"
1902 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1903
1904 #, fuzzy
1905 #| msgid "<primary>logs</primary><secondary>dispatching</secondary>"
1906 msgid "<primary>log files</primary><secondary>dispatching</secondary>"
1907 msgstr "<primary>logs</primary><secondary>répartition</secondary>"
1908
1909 #, fuzzy
1910 #| msgid "<primary>files</primary><secondary>log files</secondary>"
1911 msgid "<primary>log files</primary><seealso><filename>/var/log</filename></seealso>"
1912 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
1913
1914 msgid "Principle and Mechanism"
1915 msgstr "Principe et fonctionnement"
1916
1917 msgid "The <command>rsyslogd</command> daemon is responsible for collecting service messages coming from applications and the kernel, then dispatching them into log files (usually stored in the <filename>/var/log/</filename> directory). It obeys the <filename>/etc/rsyslog.conf</filename> configuration file."
1918 msgstr "Le démon <command>rsyslogd</command> a pour charge de collecter les messages de service provenant des applications et du noyau puis de les répartir dans des fichiers de logs (habituellement stockés dans le répertoire <filename>/var/log/</filename>). Il obéit au fichier de configuration <filename>/etc/rsyslog.conf</filename>."
1919
1920 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/rsyslog.conf</filename></secondary><see><command>rsyslogd</command></see>"
1921 msgstr ""
1922
1923 msgid "Each log message is associated with an application subsystem (called “facility” in the documentation):"
1924 msgstr "Chaque message de log est associé à un sous-système applicatif (nommé <foreignphrase>facility</foreignphrase> dans la documentation) :"
1925
1926 #, fuzzy
1927 #| msgid "<primary><command>rsyslogd</command></primary>"
1928 msgid "<primary><command>rsyslogd</command></primary><secondary>facility</secondary>"
1929 msgstr "<primary><command>rsyslogd</command></primary>"
1930
1931 msgid "<literal>auth</literal> and <literal>authpriv</literal>: for authentication;"
1932 msgstr "<literal>auth</literal> et <literal>authpriv</literal> : concernent l'authentification ;"
1933
1934 msgid "<literal>cron</literal>: comes from task scheduling services, <command>cron</command> and <command>atd</command>;"
1935 msgstr "<literal>cron</literal> : provient des services de planification de tâches, <command>cron</command> et <command>atd</command> ;"
1936
1937 msgid "<literal>daemon</literal>: affects a daemon without any special classification (DNS, NTP, etc.);"
1938 msgstr "<literal>daemon</literal> : concerne un démon sans classification particulière (serveur DNS, NTP, etc.) ;"
1939
1940 msgid "<literal>ftp</literal>: concerns the FTP server;"
1941 msgstr "<literal>ftp</literal> : concerne le serveur FTP ;"
1942
1943 msgid "<literal>kern</literal>: message coming from the kernel;"
1944 msgstr "<literal>kern</literal> : message provenant du noyau ;"
1945
1946 msgid "<literal>lpr</literal>: comes from the printing subsystem;"
1947 msgstr "<literal>lpr</literal> : provient du sous-système d'impression ;"
1948
1949 msgid "<literal>mail</literal>: comes from the e-mail subsystem;"
1950 msgstr "<literal>mail</literal> : provient de la messagerie électronique ;"
1951
1952 msgid "<literal>news</literal>: Usenet subsystem message (especially from an NNTP — Network News Transfer Protocol — server that manages newsgroups);"
1953 msgstr "<literal>news</literal> : message du sous-système Usenet (notamment du serveur NNTP — <foreignphrase>Network News Transfer Protocol</foreignphrase>, ou protocole de transfert des nouvelles sur le réseau — gérant les forums de discussion) ;"
1954
1955 #, fuzzy
1956 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
1957 msgid "<primary>Network News Transfer Protocol</primary><seealso>NNTP</seealso>"
1958 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
1959
1960 msgid "<literal>syslog</literal>: messages from the <command>syslogd</command> server, itself;"
1961 msgstr "<literal>syslog</literal> : message du serveur <command>syslogd</command> lui-même ;"
1962
1963 msgid "<literal>user</literal>: user messages (generic);"
1964 msgstr "<literal>user</literal> : messages utilisateur (générique) ;"
1965
1966 msgid "<literal>uucp</literal>: messages from the UUCP server (Unix to Unix Copy Program, an old protocol notably used to distribute e-mail messages);"
1967 msgstr "<literal>uucp</literal> : messages du sous-système UUCP (<foreignphrase>Unix to Unix Copy Program</foreignphrase>, ou programme de copie d'Unix à Unix, un vieux protocole employé pour faire circuler entre autres des messages électroniques) ;"
1968
1969 msgid "<literal>local0</literal> to <literal>local7</literal>: reserved for local use."
1970 msgstr "<literal>local0</literal> à <literal>local7</literal> : réservés pour les utilisations locales."
1971
1972 msgid "Each message is also associated with a priority level. Here is the list in decreasing order:"
1973 msgstr "À chaque message est également associé un niveau de priorité. En voici la liste par ordre décroissant :"
1974
1975 #, fuzzy
1976 #| msgid "<primary><command>rsyslogd</command></primary>"
1977 msgid "<primary><command>rsyslogd</command></primary><secondary>priority</secondary>"
1978 msgstr "<primary><command>rsyslogd</command></primary>"
1979
1980 msgid "<literal>emerg</literal>: “Help!” There is an emergency, the system is probably unusable."
1981 msgstr "<literal>emerg</literal> : « Au secours ! » le système est probablement inutilisable ."
1982
1983 msgid "<literal>alert</literal>: hurry up, any delay can be dangerous, action must be taken immediately;"
1984 msgstr "<literal>alert</literal> : vite, il y a péril en la demeure, des actions doivent être entreprises immédiatement ;"
1985
1986 msgid "<literal>crit</literal>: conditions are critical;"
1987 msgstr "<literal>crit</literal> : les conditions sont critiques ;"
1988
1989 msgid "<literal>err</literal>: error;"
1990 msgstr "<literal>err</literal> : erreur ;"
1991
1992 msgid "<literal>warn</literal>: warning (potential error);"
1993 msgstr "<literal>warn</literal> : avertissement (erreur potentielle) ;"
1994
1995 msgid "<literal>notice</literal>: conditions are normal, but the message is important;"
1996 msgstr "<literal>notice</literal> : condition normale mais message significatif ;"
1997
1998 msgid "<literal>info</literal>: informative message;"
1999 msgstr "<literal>info</literal> : message informatif ;"
2000
2001 msgid "<literal>debug</literal>: debugging message."
2002 msgstr "<literal>debug</literal> : message de débogage."
2003
2004 msgid "The Configuration File"
2005 msgstr "Le fichier de configuration"
2006
2007 msgid "<primary><command>rsyslogd</command></primary><secondary>configuration</secondary><seealso><filename>/etc/rsyslog.conf</filename></seealso>"
2008 msgstr ""
2009
2010 #, fuzzy
2011 #| msgid "The syntax of the <filename>/etc/rsyslog.conf</filename> file is detailed in the <citerefentry><refentrytitle>rsyslog.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> manual page, but there is also HTML documentation available in the <emphasis role=\"pkg\">rsyslog-doc</emphasis> package (<filename>/usr/share/doc/rsyslog-doc/html/index.html</filename>). The overall principle is to write “selector” and “action” pairs. The selector defines all relevant messages, and the actions describes how to deal with them."
2012 msgid "The syntax of the <filename>/etc/rsyslog.conf</filename> file is detailed in the <citerefentry><refentrytitle>rsyslog.conf</refentrytitle> <manvolnum>5</manvolnum></citerefentry> manual page, but there is also HTML documentation available in the <emphasis role=\"pkg\">rsyslog-doc</emphasis> package (<filename>/usr/share/doc/rsyslog-doc/html/index.html</filename>). The overall principle is to write “selector” and “action” pairs. The selector defines all relevant messages, and the action describes how to deal with them."
2013 msgstr "La syntaxe complexe du fichier <filename>/etc/rsyslog.conf</filename> est détaillée dans la page de manuel <citerefentry><refentrytitle>rsyslog.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> mais aussi dans la documentation HTML disponible dans le paquet <emphasis role=\"pkg\">rsyslog-doc</emphasis> (<filename>/usr/share/doc/rsyslog-doc/html/index.html</filename>). Le principe global est d'écrire des paires « sélecteur » et « action ». Le sélecteur définit l'ensemble des messages concernés et l'action décrit comment le traiter."
2014
2015 msgid "Syntax of the Selector"
2016 msgstr "Syntaxe du sélecteur"
2017
2018 #, fuzzy
2019 #| msgid "<primary>owner</primary><secondary>user</secondary>"
2020 msgid "<primary><command>rsyslogd</command></primary><secondary>selector</secondary>"
2021 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
2022
2023 msgid "The selector is a semicolon-separated list of <literal><replaceable>subsystem</replaceable>.<replaceable>priority</replaceable></literal> pairs (example: <literal>auth.notice;mail.info</literal>). An asterisk may represent all subsystems or all priorities (examples: <literal>*.alert</literal> or <literal>mail.*</literal>). Several subsystems can be grouped, by separating them with a comma (example: <literal>auth,mail.info</literal>). The priority indicated also covers messages of equal or higher priority; thus <literal>auth.alert</literal> indicates the <literal>auth</literal> subsystem messages of <literal>alert</literal> or <literal>emerg</literal> priority. Prefixed with an exclamation point (!), it indicates the opposite, in other words the strictly lower priorities; <literal>auth.!notice</literal>, thus, indicates messages issued from <literal>auth</literal>, with <literal>info</literal> or <literal>debug</literal> priority. Prefixed with an equal sign (=), it corresponds to precisely and only the priority indicated (<literal>auth.=notice</literal> only concerns messages from <literal>auth</literal> with <literal>notice</literal> priority)."
2024 msgstr "Le sélecteur est une liste (ayant pour séparateur le point-virgule) de couples <literal><replaceable>sous-système</replaceable></literal>.<literal><replaceable>priorité</replaceable></literal> (exemple : <literal>auth.notice;mail.info</literal>). L'astérisque peut y représenter tous les sous-systèmes ou toutes les priorités (exemples : <literal>*.alert</literal> ou <literal>mail.*</literal>). On peut regrouper plusieurs sous-systèmes en les séparant par une virgule (exemple : <literal>auth,mail.info</literal>). La priorité indiquée recouvre aussi les messages de priorité supérieure ou égale : <literal>auth.alert</literal> désigne donc les messages du sous-système <literal>auth</literal> de priorités <literal>alert</literal> ou <literal>emerg</literal>. Préfixée par un point d'exclamation, elle désignera au contraire les priorités strictement inférieures : <literal>auth.!notice</literal> désignera donc les messages issus de <literal>auth</literal> et de priorité <literal>info</literal> ou <literal>debug</literal>. Préfixée par un signe égal, elle correspondra exactement à la seule priorité indiquée (<literal>auth.=notice</literal> ne concernera donc que les messages de <literal>auth</literal> de priorité <literal>notice</literal>)."
2025
2026 msgid "Each element in the list on the selector overrides previous elements. It is thus possible to restrict a set or to exclude certain elements from it. For example, <literal>kern.info;kern.!err</literal> means messages from the kernel with priority between <literal>info</literal> and <literal>warn</literal>. The <literal>none</literal> priority indicates the empty set (no priorities), and may serve to exclude a subsystem from a set of messages. Thus, <literal>*.crit;kern.none</literal> indicates all the messages of priority equal to or higher than <literal>crit</literal> not coming from the kernel."
2027 msgstr "Au sein du sélecteur, chaque élément de la liste surcharge les éléments précédents. Il est donc possible de restreindre un ensemble ou d'en exclure certains éléments. À titre d'exemple, <literal>kern.info;kern.!err</literal> définit les messages du noyau de priorité comprise entre <literal>info</literal> et <literal>warn</literal>. La priorité <literal>none</literal> désigne l'ensemble vide (aucune des priorités) et peut servir pour exclure un sous-système d'un ensemble de messages. Ainsi, <literal>*.crit;kern.none</literal> désigne tous les messages de priorité supérieure ou égale à <literal>crit</literal> ne provenant pas du noyau."
2028
2029 msgid "Syntax of Actions"
2030 msgstr "Syntaxe des actions"
2031
2032 #, fuzzy
2033 #| msgid "<primary><command>rsyslogd</command></primary>"
2034 msgid "<primary><command>rsyslogd</command></primary><secondary>action</secondary>"
2035 msgstr "<primary><command>rsyslogd</command></primary>"
2036
2037 msgid "<emphasis>BACK TO BASICS</emphasis> The named pipe, a persistent pipe"
2038 msgstr "<emphasis>B.A.-BA</emphasis> Le tube nommé, un tube persistant"
2039
2040 msgid "<primary>named pipe</primary>"
2041 msgstr "<primary>tube nommé</primary>"
2042
2043 #, fuzzy
2044 #| msgid "<primary>backup</primary><secondary>on tape</secondary>"
2045 msgid "<primary>pipe</primary><secondary>named pipe</secondary>"
2046 msgstr "<primary>sauvegarde</primary><secondary>sur bande</secondary>"
2047
2048 #, fuzzy
2049 #| msgid "<primary><command>diff</command></primary>"
2050 msgid "<primary><command>mkfifo</command></primary>"
2051 msgstr "<primary><command>diff</command></primary>"
2052
2053 msgid "A named pipe is a particular type of file that operates like a traditional pipe (the pipe that you make with the “|” symbol on the command line), but via a file. This mechanism has the advantage of being able to relate two unrelated processes. Anything written to a named pipe blocks the process that writes until another process attempts to read the data written. This second process reads the data written by the first, which can then resume execution."
2054 msgstr "Un tube nommé est un type particulier de fichier fonctionnant comme un tube traditionnel (le <foreignphrase>pipe</foreignphrase> que l'on crée à l'aide du symbole « | » sur la ligne de commande), mais par l'intermédiaire d'un fichier. Ce mécanisme a l'avantage de pouvoir mettre en relation deux processus n'ayant aucun rapport de parenté. Toute écriture dans un tube nommé bloque le processus qui écrit jusqu'à ce qu'un autre processus tente d'y lire des données. Ce dernier lira alors les données écrites par l'autre partie, qui pourra donc reprendre son exécution."
2055
2056 msgid "Such a file is created with the <command>mkfifo</command> command."
2057 msgstr "Un tel fichier se crée avec la commande <command>mkfifo</command>."
2058
2059 msgid "The various possible actions are:"
2060 msgstr "Les différentes actions possibles sont :"
2061
2062 msgid "add the message to a file (example: <filename>/var/log/messages</filename>);"
2063 msgstr "ajouter le message à un fichier (exemple : <filename>/var/log/messages</filename>) ;"
2064
2065 msgid "send the message to a remote <command>syslog</command> server (example: <literal>@log.falcot.com</literal>);"
2066 msgstr "envoyer le message à un serveur <command>syslog</command> distant (exemple : <literal>@log.falcot.com</literal>) ;"
2067
2068 msgid "send the message to an existing named pipe (example: <literal>|/dev/xconsole</literal>);"
2069 msgstr "envoyer le message dans un tube nommé préexistant (exemple : <literal>|/dev/xconsole</literal>) ;"
2070
2071 msgid "send the message to one or more users, if they are logged in (example: <literal>root,rhertzog</literal>);"
2072 msgstr "envoyer le message à un ou plusieurs utilisateurs s'ils sont connectés (exemple : <literal>root,rhertzog</literal>) ;"
2073
2074 msgid "send the message to all logged in users (example: <literal>*</literal>);"
2075 msgstr "envoyer le message à tous les utilisateurs connectés (exemple : <literal>*</literal>) ;"
2076
2077 msgid "write the message in a text console (example: <literal>/dev/tty8</literal>)."
2078 msgstr "écrire le message sur une console texte (exemple : <literal>/dev/tty8</literal>)."
2079
2080 msgid "<emphasis>SECURITY</emphasis> Forwarding logs"
2081 msgstr "<emphasis>SÉCURITÉ</emphasis> Déporter les logs"
2082
2083 msgid "<primary>log</primary><secondary>forwarding</secondary>"
2084 msgstr "<primary><foreignphrase>log</foreignphrase></primary> <secondary>déporté</secondary>"
2085
2086 #, fuzzy
2087 #| msgid "<primary>owner</primary><secondary>user</secondary>"
2088 msgid "<primary><command>rsyslogd</command></primary><secondary>server</secondary>"
2089 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
2090
2091 msgid "It is a good idea to record the most important logs on a separate machine (perhaps dedicated for this purpose), since this will prevent any possible intruder from removing traces of their intrusion (unless, of course, they also compromise this other server). Furthermore, in the event of a major problem (such as a kernel crash), you have the logs available on another machine, which increases your chances of determining the sequence of events that caused the crash."
2092 msgstr "C'est une bonne idée que d'enregistrer les logs les plus importants sur une machine séparée (voire dédiée), car cela empêchera un éventuel intrus de supprimer les traces de son passage (sauf à compromettre également cet autre serveur). Par ailleurs, en cas de problème majeur (tel qu'un plantage du noyau), disposer de logs sur une autre machine augmente les chances de retrouver le déroulement des événements."
2093
2094 msgid "To accept log messages sent by other machines, you must reconfigure <emphasis>rsyslog</emphasis>: in practice, it is sufficient to activate the ready-for-use entries in <filename>/etc/rsyslog.conf</filename> (<literal>$ModLoad imudp</literal> and <literal>$UDPServerRun 514</literal>)."
2095 msgstr "Pour accepter les messages de log envoyés par d'autres machines, il faut reconfigurer <emphasis>rsyslog</emphasis> : dans la pratique il suffit d'activer des directives prêtes à l'emploi qui sont déjà présentes dans <filename>/etc/rsyslog.conf</filename> (<literal>$ModLoad imudp</literal> et <literal>$UDPServerRun 514</literal>)."
2096
2097 msgid "The <command>inetd</command> Super-Server"
2098 msgstr "Le super-serveur <command>inetd</command>"
2099
2100 msgid "Inetd (often called “Internet super-server”) is a server of servers. It executes rarely used servers on demand, so that they do not have to run continuously."
2101 msgstr "<command>inetd</command> (souvent appelé « super-serveur Internet ») est en réalité un serveur de serveurs, employé pour invoquer à la demande les serveurs rarement employés qui ne fonctionnent donc pas en permanence."
2102
2103 #, fuzzy
2104 #| msgid "<primary><command>inetd</command></primary>"
2105 msgid "<primary><command>inetd</command></primary><seealso>super-server</seealso>"
2106 msgstr "<primary><command>inetd</command></primary>"
2107
2108 msgid "<primary>super-server</primary>"
2109 msgstr "<primary>super-serveur</primary>"
2110
2111 msgid "The <filename>/etc/inetd.conf</filename> file lists these servers and their usual ports. The <command>inetd</command> command listens to all of them; when it detects a connection to any such port, it executes the corresponding server program."
2112 msgstr "Le fichier <filename>/etc/inetd.conf</filename> donne la liste de ces serveurs et de leurs ports habituels, qu'<command>inetd</command> écoute tous ; dès qu'il détecte une connexion sur l'un d'entre eux, il exécute le programme du serveur correspondant."
2113
2114 #, fuzzy
2115 #| msgid "<emphasis>DEBIAN POLICY</emphasis> Register a server in <filename>inetd.conf</filename>"
2116 msgid "<emphasis>DEBIAN POLICY</emphasis> Register a server in <filename>/etc/inetd.conf</filename>"
2117 msgstr "<emphasis>CHARTE DEBIAN</emphasis> Enregistrer un service dans <filename>inetd.conf</filename>"
2118
2119 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/inetd.conf</filename></secondary><see><command>inetd</command></see>"
2120 msgstr ""
2121
2122 #, fuzzy
2123 #| msgid "<primary><command>update-rc.d</command></primary>"
2124 msgid "<primary><command>update-inetd</command></primary><seealso>super-server</seealso>"
2125 msgstr "<primary><command>update-rc.d</command></primary>"
2126
2127 msgid "<primary>super-server</primary><secondary>register new server</secondary><seealso><command>update-inetd</command></seealso>"
2128 msgstr ""
2129
2130 msgid "Packages frequently want to register a new server in the <filename>/etc/inetd.conf</filename> file, but Debian Policy prohibits any package from modifying a configuration file that it doesn't own. This is why the <command>update-inetd</command> script (in the package with the same name) was created: It manages the configuration file, and other packages can thus use it to register a new server to the super-server's configuration."
2131 msgstr "Les paquets souhaiteraient parfois enregistrer un nouveau serveur dans le fichier <filename>/etc/inetd.conf</filename>, mais la charte Debian interdit à tout paquet de modifier un fichier de configuration qui ne relève pas de lui. C'est pourquoi le script <command>update-inetd</command> (du paquet éponyme) a été créé : il a à sa charge le fichier de configuration et les autres paquets peuvent ainsi l'employer pour demander au super-serveur de prendre en compte un nouveau serveur."
2132
2133 msgid "Each significant line of the <filename>/etc/inetd.conf</filename> file describes a server through seven fields (separated by spaces):"
2134 msgstr "Chaque ligne significative du fichier <filename>/etc/inetd.conf</filename> décrit un service par sept champs (séparés par des blancs):"
2135
2136 #, fuzzy
2137 #| msgid "<primary>user</primary><secondary>owner</secondary>"
2138 msgid "<primary>super-server</primary><secondary>configuration</secondary>"
2139 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
2140
2141 msgid "The TCP or UDP port number, or the service name (which is mapped to a standard port number with the information contained in the <filename>/etc/services</filename> file)."
2142 msgstr "Le numéro du port TCP ou UDP, ou le nom du service (qui est associé à un numéro de port standard par la table de correspondance définie dans le fichier <filename>/etc/services</filename>)."
2143
2144 #, fuzzy
2145 #| msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
2146 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/services</filename></secondary>"
2147 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
2148
2149 msgid "The socket type: <literal>stream</literal> for a TCP connection, <literal>dgram</literal> for UDP datagrams."
2150 msgstr "Le type de <foreignphrase>socket</foreignphrase> : <literal>stream</literal> pour une connexion TCP, <literal>dgram</literal> pour des datagrammes UDP ."
2151
2152 #, fuzzy
2153 #| msgid "The protocol: <literal>tcp</literal> or <literal>udp</literal>."
2154 msgid "The protocol: <literal>tcp</literal>, <literal>tcp6</literal>, <literal>udp</literal>, or <literal>udp6</literal>."
2155 msgstr "Le protocole : <literal>tcp</literal> ou <literal>udp</literal>."
2156
2157 msgid "The options: two possible values: <literal>wait</literal> or <literal>nowait</literal>, to tell <command>inetd</command> whether it should wait or not for the end of the launched process before accepting another connection. For TCP connections, easily multiplexable, you can usually use <literal>nowait</literal>. For programs responding over UDP, you should use <literal>nowait</literal> only if the server is capable of managing several connections in parallel. You can suffix this field with a period, followed by the maximum number of connections authorized per minute (the default limit is 256)."
2158 msgstr "Les options : deux valeurs sont possibles : <literal>wait</literal> ou <literal>nowait</literal>, pour signifier à <command>inetd</command> qu'il doit, ou non, attendre la fin du processus lancé avant d'accepter une autre connexion. Pour les connexions TCP, facilement multiplexables, on pourra généralement utiliser <literal>nowait</literal>. Pour les programmes répondant sur UDP, il ne faut retenir <literal>nowait</literal> que si le serveur est capable de gérer plusieurs connexions en parallèle. On pourra suffixer ce champ d'un point suivi du nombre maximum de connexions autorisées par minute (la limite par défaut étant de 256)."
2159
2160 #, fuzzy
2161 #| msgid "The user name of the user under whose identity the server will run."
2162 msgid "The user name of the user under whose identity the server will run. Optionally one can add the group too via <literal>user.group</literal> syntax."
2163 msgstr "L'identifiant de l'utilisateur sous l'identité duquel le serveur sera exécuté."
2164
2165 msgid "The full path to the server program to execute."
2166 msgstr "Le chemin complet du programme serveur à exécuter."
2167
2168 msgid "The arguments: this is a complete list of the program's arguments, including its own name (<literal>argv[0]</literal> in C)."
2169 msgstr "Les arguments : il s'agit de la liste complète des arguments du programme, y compris son propre nom (<literal>argv[0]</literal> en C)."
2170
2171 #, fuzzy
2172 #| msgid "While Debian installs <emphasis role=\"pkg\">openbsd-inetd</emphasis> by default, there is no lack of alternatives: we can mention <emphasis role=\"pkg\">inetutils-inetd</emphasis>, <emphasis role=\"pkg\">micro-inetd</emphasis>, <emphasis role=\"pkg\">rlinetd</emphasis> and <emphasis role=\"pkg\">xinetd</emphasis>."
2173 msgid "The following example illustrates some use-cases after installing <emphasis role=\"pkg\">talkd</emphasis>, <emphasis role=\"pkg\">nullidentd</emphasis> (<emphasis role=\"pkg\">ident-server</emphasis>), and <emphasis role=\"pkg\">fingerd</emphasis>:"
2174 msgstr "Bien que Debian installe <emphasis role=\"pkg\">openbsd-inetd</emphasis> par défaut, les alternatives ne manquent pas. Outre celles déjà mentionnées, il existe <emphasis role=\"pkg\">inetutils-inetd</emphasis>, <emphasis role=\"pkg\">micro-inetd</emphasis>, <emphasis role=\"pkg\">rlinetd</emphasis> et <emphasis role=\"pkg\">xinetd</emphasis>."
2175
2176 msgid "Excerpt from <filename>/etc/inetd.conf</filename>"
2177 msgstr "Extrait de <filename>/etc/inetd.conf</filename>"
2178
2179 msgid ""
2180 "#:BSD: Shell, login, exec and talk are BSD protocols.\n"
2181 "talk dgram udp wait nobody.tty /usr/sbin/in.talkd in.talkd\n"
2182 "ntalk dgram udp wait nobody.tty /usr/sbin/in.ntalkd in.ntalkd\n"
2183 "\n"
2184 "#:INFO: Info services\n"
2185 "ident stream tcp nowait nobody /usr/sbin/nullidentd nullidentd\n"
2186 "finger stream tcp nowait nobody /usr/sbin/tcpd /usr/sbin/in.fingerd"
2187 msgstr ""
2188
2189 msgid "<primary><command>tcpd</command></primary>"
2190 msgstr "<primary><command>tcpd</command></primary>"
2191
2192 #, fuzzy
2193 #| msgid "<primary>service</primary><secondary>restart</secondary>"
2194 msgid "<primary>super-server</primary><secondary>access limitation</secondary>"
2195 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
2196
2197 #, fuzzy
2198 #| msgid "The <command>tcpd</command> program is frequently used in the <filename>/etc/inetd.conf</filename> file. It allows limiting incoming connections by applying access control rules, documented in the <citerefentry><refentrytitle>hosts_access</refentrytitle><manvolnum>5</manvolnum></citerefentry> manual page, and which are configured in the <filename>/etc/hosts.allow</filename> and <filename>/etc/hosts.deny</filename> files. Once it has been determined that the connection is authorized, <command>tcpd</command> executes the real server (like <command>in.fingerd</command> in our example). It is worth noting that <command>tcpd</command> relies on the name under which it was invoked (that is the first argument, <literal>argv[0]</literal>) to identify the real program to run. So you should not start the arguments list with <literal>tcpd</literal> but with the program that must be wrapped."
2199 msgid "The <command>tcpd</command> program is frequently used in the <filename>/etc/inetd.conf</filename> file. It allows limiting incoming connections by applying access control rules, documented in the <citerefentry><refentrytitle>hosts_access</refentrytitle> <manvolnum>5</manvolnum></citerefentry> manual page, and which are configured in the <filename>/etc/hosts.allow</filename> and <filename>/etc/hosts.deny</filename> files. Once it has been determined that the connection is authorized, <command>tcpd</command> executes the real server (like <command>in.fingerd</command> in our example). It is worth noting that <command>tcpd</command> relies on the name under which it was invoked (that is the first argument, <literal>argv[0]</literal>) to identify the real program to run. So you should not start the arguments list with <literal>tcpd</literal> but with the program that must be wrapped."
2200 msgstr "Le programme <command>tcpd</command> est souvent employé dans le fichier <filename>/etc/inetd.conf</filename>. Il permet de restreindre les connexions entrantes en appliquant des règles de contrôle, documentées dans la page de manuel <citerefentry><refentrytitle>hosts_access</refentrytitle><manvolnum>5</manvolnum></citerefentry> et qui se configurent dans les fichiers <filename>/etc/hosts.allow</filename> et <filename>/etc/hosts.deny</filename>. Une fois qu'il a été déterminé que la connexion est autorisée, <command>tcpd</command> exécute à son tour le serveur réellement demandé (comme <command>in.fingerd</command> dans notre exemple)."
2201
2202 #, fuzzy
2203 #| msgid "<primary>login</primary><secondary>remote login</secondary>"
2204 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/hosts.allow</filename></secondary>"
2205 msgstr "<primary>connexion</primary><secondary>à distance</secondary>"
2206
2207 #, fuzzy
2208 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2209 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/hosts.deny</filename></secondary>"
2210 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2211
2212 msgid "<emphasis>COMMUNITY</emphasis> Wietse Venema"
2213 msgstr "<emphasis>COMMUNAUTÉ</emphasis> Wietse Venema"
2214
2215 msgid "<primary>Wietse Venema</primary>"
2216 msgstr "<primary>Wietse Venema</primary>"
2217
2218 msgid "<primary>Venema, Wietse</primary>"
2219 msgstr "<primary>Venema, Wietse</primary>"
2220
2221 #, fuzzy
2222 #| msgid "Wietse Venema, whose expertise in security has made him a renowned programmer, is the author of the <command>tcpd</command> program. He is also the main creator of Postfix, the modular e-mail server (SMTP, Simple Mail Transfer Protocol), designed to be safer and more reliable than <command>sendmail</command>, which features a long history of security vulnerabilities."
2223 msgid "Wietse Venema, whose expertise in security has made him a renowned programmer, is the author of the <command>tcpd</command> program. He is also the main creator of Postfix, the modular e-mail server (SMTP, Simple Mail Transfer Protocol), designed to be safer and more reliable than <command>sendmail</command>, which features a long history of security vulnerabilities. We will have a closer look at this mail server in <xref linkend=\"sect.smtp-mail-server\" />."
2224 msgstr "Wietse Venema, dont les compétences en matière de sécurité en font un programmeur réputé, est l'auteur du programme <command>tcpd</command>. C'est également l'auteur principal de Postfix, serveur de messagerie électronique (SMTP — <foreignphrase>Simple Mail Transfer Protocol</foreignphrase>, ou protocole simple de courrier électronique) modulaire conçu pour être plus sûr et plus fiable que <command>sendmail</command>, au long historique de failles de sécurité."
2225
2226 msgid "<emphasis>ALTERNATIVE</emphasis> Other <command>inetd</command> commands"
2227 msgstr "<emphasis>ALTERNATIVE</emphasis> Autres <command>inetd</command>"
2228
2229 #, fuzzy
2230 #| msgid "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
2231 msgid "<primary><emphasis role=\"pkg\">inet-superserver</emphasis></primary><seealso>super-user</seealso>"
2232 msgstr "<primary><emphasis role=\"pkg\">vnc4server</emphasis></primary>"
2233
2234 #, fuzzy
2235 #| msgid "<primary><emphasis role=\"pkg\">vino</emphasis></primary>"
2236 msgid "<primary><emphasis role=\"pkg\">xinetd</emphasis></primary><seealso>super-user</seealso>"
2237 msgstr "<primary><emphasis role=\"pkg\">vino</emphasis></primary>"
2238
2239 #, fuzzy
2240 #| msgid "While Debian installs <emphasis role=\"pkg\">openbsd-inetd</emphasis> by default, there is no lack of alternatives: we can mention <emphasis role=\"pkg\">inetutils-inetd</emphasis>, <emphasis role=\"pkg\">micro-inetd</emphasis>, <emphasis role=\"pkg\">rlinetd</emphasis> and <emphasis role=\"pkg\">xinetd</emphasis>."
2241 msgid "While Debian installs <emphasis role=\"pkg\">openbsd-inetd</emphasis> by default, there is no lack of alternatives: we can mention <emphasis role=\"pkg\">inetutils-inetd</emphasis>, <emphasis role=\"pkg\">rlinetd</emphasis>, and <emphasis role=\"pkg\">xinetd</emphasis>, which all provide the virtual package <emphasis role=\"pkg\">inet-superserver</emphasis>."
2242 msgstr "Bien que Debian installe <emphasis role=\"pkg\">openbsd-inetd</emphasis> par défaut, les alternatives ne manquent pas. Outre celles déjà mentionnées, il existe <emphasis role=\"pkg\">inetutils-inetd</emphasis>, <emphasis role=\"pkg\">micro-inetd</emphasis>, <emphasis role=\"pkg\">rlinetd</emphasis> et <emphasis role=\"pkg\">xinetd</emphasis>."
2243
2244 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/xinetd.d/</filename></secondary><seealso><command>xinetd</command></seealso>"
2245 msgstr ""
2246
2247 msgid "Most of these alternatives share the same configuration file <filename>/etc/inetd.conf</filename>."
2248 msgstr ""
2249
2250 #, fuzzy
2251 #| msgid "This last incarnation of a super-server offers very interesting possibilities. Most notably, its configuration can be split into several files (stored, of course, in the <filename>/etc/xinetd.d/</filename> directory), which can make an administrator's life easier."
2252 msgid "This last incarnation of a super-server however, offers different syntax and very interesting possibilities. Most notably, its configuration can be split into several files (stored, of course, in the <filename>/etc/xinetd.d/</filename> directory), which can make an administrator's life easier. It is considered to be more powerful, but also more complex."
2253 msgstr "Cette dernière incarnation d'un super-serveur offre des possibilités intéressantes. Elle permet notamment de séparer la configuration dans plusieurs fichiers (stockés, bien entendu, dans le répertoire <filename>/etc/xinetd.d/</filename>), ce qui peut faciliter la vie des administrateurs."
2254
2255 #, fuzzy
2256 #| msgid "Last but not least, it is even possible to emulate <command>inetd</command>'s behaviour with <command>systemd</command>'s socket-activation mechanism (see <xref linkend=\"sect.systemd\" />)."
2257 msgid "Last but not least, it is even possible to emulate <command>inetd</command>'s behavior with <command>systemd</command>'s socket-activation mechanism (see <xref linkend=\"sect.systemd\" />)."
2258 msgstr "Enfin, il est également possible d'émuler le comportement d'<command>inetd</command> avec le mécanisme d'activation de socket de <command>systemd</command> (voir <xref linkend=\"sect.systemd\" />)."
2259
2260 msgid "Scheduling Tasks with <command>cron</command> and <command>atd</command>"
2261 msgstr "Planification de tâches : <command>cron</command> et <command>atd</command>"
2262
2263 msgid "<primary><command>cron</command></primary>"
2264 msgstr "<primary><command>cron</command></primary>"
2265
2266 msgid "<primary><command>atd</command></primary>"
2267 msgstr "<primary><command>atd</command></primary>"
2268
2269 msgid "<primary>scheduled commands</primary>"
2270 msgstr "<primary>commandes planifiées</primary>"
2271
2272 # TODO: INTEGRATE ALTERNATE STRING: <primary>ordonnanceur de commandes</primary>
2273 msgid "<primary>command scheduling</primary>"
2274 msgstr "<primary>planification de commandes</primary>"
2275
2276 #, fuzzy
2277 #| msgid "<command>cron</command> is the daemon responsible for executing scheduled and recurring commands (every day, every week, etc.); <command>atd</command> is that which deals with commands to be executed a single time, but at a specific moment in the future."
2278 msgid "<command>cron</command> is the daemon responsible for executing scheduled and recurring commands (every hour, every day, every week, etc.). <command>atd</command> deals with commands to be executed a single time, but at a specific moment in the future."
2279 msgstr "<command>cron</command> est le démon en charge d'exécuter des commandes planifiées et récurrentes (chaque jour, chaque semaine, etc.) ; <command>atd</command> est celui qui s'occupe des commandes à exécuter une seule fois, à un instant précis et futur."
2280
2281 msgid "In a Unix system, many tasks are scheduled for regular execution:"
2282 msgstr "Dans un système Unix, de nombreuses tâches sont régulièrement planifiées :"
2283
2284 msgid "rotating the logs;"
2285 msgstr "la rotation des logs ;"
2286
2287 msgid "updating the database for the <command>locate</command> program;"
2288 msgstr "la mise à jour de la base de données du programme <command>locate</command> ;"
2289
2290 msgid "back-ups;"
2291 msgstr "les sauvegardes ;"
2292
2293 msgid "maintenance scripts (such as cleaning out temporary files)."
2294 msgstr "des scripts d'entretien (comme le nettoyage des fichiers temporaires)."
2295
2296 #, fuzzy
2297 #| msgid "<primary><command>cron</command></primary>"
2298 msgid "<primary><command>crontab</command></primary>"
2299 msgstr "<primary><command>cron</command></primary>"
2300
2301 msgid "By default, all users can schedule the execution of tasks. Each user has thus their own <emphasis>crontab</emphasis> in which they can record scheduled commands. It can be edited by running <command>crontab -e</command> (its content is stored in the <filename>/var/spool/cron/crontabs/<replaceable>user</replaceable></filename> file)."
2302 msgstr "Par défaut, tous les utilisateurs peuvent planifier l'exécution de tâches. C'est pourquoi chacun dispose de sa propre <emphasis>crontab</emphasis>, où il peut consigner les commandes à planifier. Il peut la modifier en exécutant <command>crontab -e</command> (ses informations sont stockées dans le fichier <filename>/var/spool/cron/crontabs/<replaceable>utilisateur</replaceable></filename>)."
2303
2304 msgid "<emphasis>SECURITY</emphasis> Restricting <command>cron</command> or <command>atd</command>"
2305 msgstr "<emphasis>SÉCURITÉ</emphasis> Restreindre <command>cron</command> ou <command>atd</command>"
2306
2307 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/at.allow</filename></secondary><seealso><command>atd</command></seealso>"
2308 msgstr ""
2309
2310 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/at.deny</filename></secondary><seealso><command>atd</command></seealso>"
2311 msgstr ""
2312
2313 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.allow</filename></secondary><seealso><command>cron</command></seealso>"
2314 msgstr ""
2315
2316 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.deny</filename></secondary><seealso><command>cron</command></seealso>"
2317 msgstr ""
2318
2319 #, fuzzy
2320 #| msgid "You can restrict access to <command>cron</command> by creating an explicit authorization file (whitelist) in <filename>/etc/cron.allow</filename>, in which you indicate the only users authorized to schedule commands. All others will automatically be deprived of this feature. Conversely, to only block one or two troublemakers, you could write their username in the explicit prohibition file (blacklist), <filename>/etc/cron.deny</filename>. This same feature is available for <command>atd</command>, with the <filename>/etc/at.allow</filename> and <filename>/etc/at.deny</filename> files."
2321 msgid "You can restrict access to <command>crontab</command> by creating an explicit authorization file (whitelist) in <filename>/etc/cron.allow</filename>, in which you indicate the only users authorized to schedule commands. All others will automatically be deprived of this feature. Conversely, to only block one or two troublemakers, you could write their username in the explicit prohibition file (blacklist), <filename>/etc/cron.deny</filename>. This same feature is available for <command>atd</command>, with the <filename>/etc/at.allow</filename> and <filename>/etc/at.deny</filename> files (also described in their manual pages)."
2322 msgstr "On peut restreindre l'accès à <command>cron</command> en créant le fichier d'autorisation explicite <filename>/etc/cron.allow</filename>, où l'on consignera les seuls utilisateurs autorisés à planifier des commandes. Tous les autres seront automatiquement dépourvus de cette fonctionnalité. Inversement, pour n'en priver qu'un ou deux trouble-fête, on écrira leur nom dans le fichier d'interdiction explicite <filename>/etc/cron.deny</filename>. Le même mécanisme encadre <command>atd</command>, avec les fichiers <filename>/etc/at.allow</filename> et <filename>/etc/at.deny</filename>."
2323
2324 #, fuzzy
2325 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2326 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/crontab</filename></secondary>"
2327 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2328
2329 #, fuzzy
2330 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2331 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.d/</filename></secondary>"
2332 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2333
2334 msgid "The root user has their own <emphasis>crontab</emphasis>, but can also use the <filename>/etc/crontab</filename> file, or write additional <emphasis>crontab</emphasis> files in the <filename>/etc/cron.d</filename> directory. These last two solutions have the advantage of being able to specify the user identity to use when executing the command."
2335 msgstr "L'utilisateur root dispose de sa <emphasis>crontab</emphasis> personnelle, mais peut également employer le fichier <filename>/etc/crontab</filename> ou déposer des <emphasis>crontab</emphasis> supplémentaires dans le répertoire <filename>/etc/cron.d/</filename>. Ces deux dernières solutions ont l'avantage de pouvoir préciser l'utilisateur sous l'identité duquel exécuter la commande."
2336
2337 msgid "The <emphasis>cron</emphasis> package includes by default some scheduled commands that execute:"
2338 msgstr "Le paquet <emphasis>cron</emphasis> propose par défaut des commandes planifiées qui exécutent :"
2339
2340 #, fuzzy
2341 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2342 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.hourly/</filename></secondary>"
2343 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2344
2345 msgid "programs in the <filename>/etc/cron.hourly/</filename> directory once per hour;"
2346 msgstr "une fois par heure les programmes du répertoire <filename>/etc/cron.hourly/</filename> ;"
2347
2348 #, fuzzy
2349 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2350 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.daily/</filename></secondary>"
2351 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2352
2353 msgid "programs in <filename>/etc/cron.daily/</filename> once per day;"
2354 msgstr "une fois par jour les programmes du répertoire <filename>/etc/cron.daily/</filename> ;"
2355
2356 #, fuzzy
2357 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2358 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.weekly/</filename></secondary>"
2359 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2360
2361 msgid "programs in <filename>/etc/cron.weekly/</filename> once per week;"
2362 msgstr "une fois par semaine les programmes du répertoire <filename>/etc/cron.weekly/</filename> ;"
2363
2364 #, fuzzy
2365 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
2366 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/cron.monthly/</filename></secondary>"
2367 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
2368
2369 msgid "programs in <filename>/etc/cron.monthly/</filename> once per month."
2370 msgstr "une fois par mois les programmes du répertoire <filename>/etc/cron.monthly/</filename>."
2371
2372 msgid "Many Debian packages rely on this service: by putting maintenance scripts in these directories, they ensure optimal operation of their services."
2373 msgstr "De nombreux paquets Debian profitent de ce service : en déposant dans ces répertoires des scripts de maintenance, ils assurent le fonctionnement optimal de leur service."
2374
2375 msgid "Format of a <filename>crontab</filename> File"
2376 msgstr "Format d'un fichier <filename>crontab</filename>"
2377
2378 #, fuzzy
2379 #| msgid "<primary>manager</primary><secondary>display manager</secondary>"
2380 msgid "<primary><command>crontab</command></primary><secondary><filename>crontab</filename> file format</secondary>"
2381 msgstr "<primary>gestionnaire</primary><secondary>d'écran</secondary>"
2382
2383 msgid "<emphasis>TIP</emphasis> Text shortcuts for <command>cron</command>"
2384 msgstr "<emphasis>ASTUCE</emphasis> Raccourcis textuels pour <command>cron</command>"
2385
2386 msgid "<command>cron</command> recognizes some abbreviations which replace the first five fields in a <filename>crontab</filename> entry. They correspond to the most classic scheduling options:"
2387 msgstr "Des abréviations, qui remplacent les cinq premiers champs d'une entrée de <filename>crontab</filename>, décrivent les planifications les plus classiques. Les voici :"
2388
2389 msgid "<literal>@yearly</literal>: once per year (January 1, at 00:00);"
2390 msgstr "<literal>@yearly</literal> : une fois par an (le premier janvier à 0 h 00) ;"
2391
2392 msgid "<literal>@monthly</literal>: once per month (the 1st of the month, at 00:00);"
2393 msgstr "<literal>@monthly</literal> : une fois par mois (le premier du mois à 0 h 00) ;"
2394
2395 msgid "<literal>@weekly</literal>: once per week (Sunday at 00:00);"
2396 msgstr "<literal>@weekly</literal> : une fois par semaine (le dimanche à 0 h 00) ;"
2397
2398 msgid "<literal>@daily</literal>: once per day (at 00:00);"
2399 msgstr "<literal>@daily</literal> : une fois par jour (à 0 h 00) ;"
2400
2401 msgid "<literal>@hourly</literal>: once per hour (at the beginning of each hour)."
2402 msgstr "<literal>@hourly</literal> : une fois par heure (au début de chaque heure)."
2403
2404 #, fuzzy
2405 #| msgid "The protocol: <literal>tcp</literal> or <literal>udp</literal>."
2406 msgid "More abbreviations are recognized, like <literal>@reboot</literal>or <literal>@midnight</literal>."
2407 msgstr "Le protocole : <literal>tcp</literal> ou <literal>udp</literal>."
2408
2409 msgid "<emphasis>SPECIAL CASE</emphasis> <command>cron</command> and daylight savings time"
2410 msgstr "<emphasis>CAS PARTICULIER</emphasis> <command>cron</command> et l'heure d'été"
2411
2412 msgid "In Debian, <command>cron</command> takes the time change (for Daylight Savings Time, or in fact for any significant change in the local time) into account as best as it can. Thus, the commands that should have been executed during an hour that never existed (for example, tasks scheduled at 2:30 am during the Spring time change in France, since at 2:00 am the clock jumps directly to 3:00 am) are executed shortly after the time change (thus around 3:00 am DST). On the other hand, in autumn, when commands would be executed several times (2:30 am DST, then an hour later at 2:30 am standard time, since at 3:00 am DST the clock turns back to 2:00 am) are only executed once."
2413 msgstr "Sous Debian, <command>cron</command> prend en compte au mieux les changements d'heure (en fait, lorsqu'un saut important est détecté dans l'heure locale). Ainsi, les commandes qui auraient dû être exécutées à une heure qui n'a pas existé (par exemple, 2 h 30 lors du changement d'heure de printemps en France) sont exécutées peu après le changement d'heure (soit peu après 3 h du matin en heure d'été). À l'inverse, à l'automne, les commandes qui auraient pu être exécutées plusieurs fois (à 2 h 30 heure d'été puis, une heure plus tard, à 2 h 30 heure d'hiver) ne le sont qu'une fois."
2414
2415 msgid "Be careful, however, if the order in which the different scheduled tasks and the delay between their respective executions matters, you should check the compatibility of these constraints with <command>cron</command>'s behavior; if necessary, you can prepare a special schedule for the two problematic nights per year."
2416 msgstr "On prendra cependant soin, si l'ordre dans lequel les différentes tâches planifiées et le délai entre leurs déclenchements respectifs est important, de vérifier la compatibilité de ces contraintes avec le mode de fonctionnement de <command>cron</command> — le cas échéant, on pourra préparer une planification spéciale pour les deux nuits de l'année où le problème risque d'apparaître."
2417
2418 #, fuzzy
2419 #| msgid "Each significant line of a <emphasis>crontab</emphasis> describes a scheduled command with the six (or seven) following fields:"
2420 msgid "Each significant line of a <filename>crontab</filename> entry describes a scheduled command with the six (or seven) following fields:"
2421 msgstr "Chaque ligne significative d'une <emphasis>crontab</emphasis> décrit une commande planifiée grâce aux six (ou sept) champs suivants :"
2422
2423 #, fuzzy
2424 #| msgid "the value for the minute (number from 0 to 59);"
2425 msgid "the value for the minute (from 0 to 59);"
2426 msgstr "la condition sur les minutes (nombres compris de 0 à 59) ;"
2427
2428 msgid "the value for the hour (from 0 to 23);"
2429 msgstr "la condition sur les heures (de 0 à 23) ;"
2430
2431 msgid "the value for the day of the month (from 1 to 31);"
2432 msgstr "la condition sur le jour du mois (de 1 à 31) ;"
2433
2434 msgid "the value for the month (from 1 to 12);"
2435 msgstr "la condition sur le mois (de 1 à 12) ;"
2436
2437 msgid "the value for the day of the week (from 0 to 7, 1 corresponding to Monday, Sunday being represented by both 0 and 7; it is also possible to use the first three letters of the name of the day of the week in English, such as <literal>Sun</literal>, <literal>Mon</literal>, etc.);"
2438 msgstr "la condition sur le jour de la semaine (de 0 à 7, le 1 correspondant au lundi — le dimanche est représenté à la fois par 0 et par 7 ; il est également possible d'employer les trois premières lettres du nom du jour en anglais comme <literal>Sun</literal>, <literal>Mon</literal>, etc.) ;"
2439
2440 msgid "the user name under whose identity the command must be executed (in the <filename>/etc/crontab</filename> file and in the fragments located in <filename>/etc/cron.d/</filename>, but not in the users' own crontab files);"
2441 msgstr "le nom d'utilisateur sous lequel la commande devra s'exécuter (dans le fichier <filename>/etc/crontab</filename> et dans les fragments déposés dans <filename>/etc/cron.d/</filename>, mais pas les crontabs des utilisateurs) ;"
2442
2443 msgid "the command to execute (when the conditions defined by the first five columns are met)."
2444 msgstr "la commande à exécuter (quand les conditions définies par les cinq premières colonnes sont remplies)."
2445
2446 msgid "All these details are documented in the <citerefentry><refentrytitle>crontab</refentrytitle> <manvolnum>5</manvolnum></citerefentry> man page."
2447 msgstr "Tous les détails sont documentés dans la page de manuel <citerefentry><refentrytitle>crontab</refentrytitle> <manvolnum>5</manvolnum></citerefentry>."
2448
2449 #, fuzzy
2450 #| msgid "Each value can be expressed in the form of a list of possible values (separated by commas). The syntax <literal>a-b</literal> describes the interval of all the values between <literal>a</literal> and <literal>b</literal>. The syntax <literal>a-b/c</literal> describes the interval with an increment of <literal>c</literal> (example: <literal>0-10/2</literal> means <literal>0,2,4,6,8,10</literal>). An asterisk <literal>*</literal> is a wildcard, representing all possible values."
2451 msgid "Each value can also be expressed in the form of a list of possible values (separated by commas). The syntax <literal>a-b</literal> describes the interval of all the values between <literal>a</literal> and <literal>b</literal>. The syntax <literal>a-b/c</literal> describes the interval with an increment of <literal>c</literal> (example: <literal>0-10/2</literal> means <literal>0,2,4,6,8,10</literal>). An asterisk <literal>*</literal> is a wildcard, representing all possible values."
2452 msgstr "Chaque condition peut s'exprimer sous la forme d'une énumération de valeurs possibles (séparées par des virgules). La syntaxe <literal>a-b</literal> décrit l'intervalle de toutes les valeurs comprises entre <literal>a</literal> et <literal>b</literal>. La syntaxe <literal>a-b/c</literal> décrit un intervalle avec un incrément de <literal>c</literal> (exemple : <literal>0-10/2</literal> correspond à <literal>0,2,4,6,8,10</literal>). Le joker <literal>*</literal> représente toutes les valeurs possibles."
2453
2454 #, fuzzy
2455 #| msgid "Sample <filename>crontab</filename> file"
2456 msgid "Sample user <filename>crontab</filename> file"
2457 msgstr "Exemple de <filename>crontab</filename>"
2458
2459 #, fuzzy
2460 #| msgid ""
2461 #| "#Format\n"
2462 #| "#min hour day mon dow command\n"
2463 #| "\n"
2464 #| "# Download data every night at 7:25 pm\n"
2465 #| " 25 19 * * * $HOME/bin/get.pl\n"
2466 #| "\n"
2467 #| "# 8:00 am, on weekdays (Monday through Friday)\n"
2468 #| " 00 08 * * 1-5 $HOME/bin/dosomething\n"
2469 #| "\n"
2470 #| "# Restart the IRC proxy after each reboot\n"
2471 #| "@reboot /usr/bin/dircproxy"
2472 msgid ""
2473 "#Format\n"
2474 "#min hour day mon dow command\n"
2475 "\n"
2476 "# Download data every night at 7:25 pm\n"
2477 " 25 19 * * * $HOME/bin/get.pl\n"
2478 "\n"
2479 "# 8:00 am, on weekdays (Monday through Friday)\n"
2480 " 00 08 * * 1-5 $HOME/bin/dosomething\n"
2481 "\n"
2482 "# every two hours\n"
2483 " * */2 * * * $HOME/bin/dosomethingelse\n"
2484 "\n"
2485 "# Restart the IRC proxy after each reboot\n"
2486 "@reboot /usr/bin/dircproxy"
2487 msgstr ""
2488 "#Format\n"
2489 "#min heu jou moi jsem commande\n"
2490 "\n"
2491 "# Télécharge les données tous les soirs à 19:25\n"
2492 " 25 19 * * * $HOME/bin/get.pl\n"
2493 "\n"
2494 "# Le matin à 8:00, en semaine (lundi à vendredi)\n"
2495 " 00 08 * * 1-5 $HOME/bin/fait_quelquechose\n"
2496 "\n"
2497 "# Redémarre le proxy IRC après chaque reboot\n"
2498 "@reboot /usr/bin/dircproxy"
2499
2500 msgid "<emphasis>TIP</emphasis> Executing a command on boot"
2501 msgstr "<emphasis>ASTUCE</emphasis> Exécuter une commande au démarrage"
2502
2503 #, fuzzy
2504 #| msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
2505 msgid "<primary><command>cron</command></primary><secondary><literal>@reboot</literal></secondary>"
2506 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
2507
2508 msgid "To execute a command a single time, just after booting the computer, you can use the <literal>@reboot</literal> macro (a simple restart of <command>cron</command> does not trigger a command scheduled with <literal>@reboot</literal>). This macro replaces the first five fields of an entry in the <emphasis>crontab</emphasis>."
2509 msgstr "Pour exécuter une commande une seule fois, juste après le démarrage de l'ordinateur, on peut recourir à la macro <literal>@reboot</literal> (un simple redémarrage de <command>cron</command> ne déclenche pas une commande planifiée avec <literal>@reboot</literal>). Cette macro remplace elle aussi les cinq premiers champs d'une entrée dans la <emphasis>crontab</emphasis>."
2510
2511 msgid "<emphasis>ALTERNATIVE</emphasis> Emulating <command>cron</command> with <command>systemd</command>"
2512 msgstr "<emphasis>ALTERNATIVE</emphasis> Émuler <command>cron</command> avec <command>systemd</command>"
2513
2514 #, fuzzy
2515 #| msgid "It is possible to emulate part of <command>cron</command>'s behaviour with <command>systemd</command>'s timer mechanism (see <xref linkend=\"sect.systemd\" />)."
2516 msgid "It is possible to emulate part of <command>cron</command>'s behavior with <command>systemd</command>'s timer mechanism (see <xref linkend=\"sect.systemd\" />)."
2517 msgstr "Il est possible d'émuler un partie du comportement de <command>cron</command> avec le système de minuterie <foreignphrase>(timer)</foreignphrase> de <command>systemd</command> (voir <xref linkend=\"sect.systemd\" />)."
2518
2519 msgid "Using the <command>at</command> Command"
2520 msgstr "Emploi de la commande <command>at</command>"
2521
2522 msgid "<primary><command>at</command></primary>"
2523 msgstr "<primary><command>at</command></primary>"
2524
2525 #, fuzzy
2526 #| msgid "The <command>at</command> executes a command at a specified moment in the future. It takes the desired time and date as command-line parameters, and the command to be executed in its standard input. The command will be executed as if it had been entered in the current shell. <command>at</command> even takes care to retain the current environment, in order to reproduce the same conditions when it executes the command. The time is indicated by following the usual conventions: <literal>16:12</literal> or <literal>4:12pm</literal> represents 4:12 pm. The date can be specified in several European and Western formats, including <literal>DD.MM.YY</literal> (<literal>27.07.15</literal> thus representing 27 July 2015), <literal>YYYY-MM-DD</literal> (this same date being expressed as <literal>2015-07-27</literal>), <literal>MM/DD/[CC]YY</literal> (ie., <literal>12/25/15</literal> or <literal>12/25/2015</literal> will be December 25, 2015), or simple <literal>MMDD[CC]YY</literal> (so that <literal>122515</literal> or <literal>12252015</literal> will, likewise, represent December 25, 2015). Without it, the command will be executed as soon as the clock reaches the time indicated (the same day, or tomorrow if that time has already passed on the same day). You can also simply write “today” or “tomorrow”, which is self-explanatory."
2527 msgid "The <command>at</command> executes a command at a specified moment in the future. It takes the desired time and date as command-line parameters, and the command to be executed in its standard input. The command will be executed as if it had been entered in the current shell. <command>at</command> even takes care to retain the current environment, in order to reproduce the same conditions when it executes the command. The time is indicated by following the usual conventions: <literal>16:12</literal> or <literal>4:12pm</literal> represents 4:12 pm. The date can be specified in several European and Western formats, including <literal>DD.MM.YY</literal> (<literal>27.07.22</literal> thus representing 27 July 2022), <literal>YYYY-MM-DD</literal> (this same date being expressed as <literal>2022-07-27</literal>), <literal>MM/DD/[CC]YY</literal> (i.e., <literal>12/25/22</literal> or <literal>12/25/2022</literal> will be December 25, 2022), or simple <literal>MMDD[CC]YY</literal> (so that <literal>122522</literal> or <literal>12252022</literal> will, likewise, represent December 25, 2022). Without it, the command will be executed as soon as the clock reaches the time indicated (the same day, or tomorrow if that time has already passed on the same day). You can also simply write “today” or “tomorrow”, which is self-explanatory."
2528 msgstr "La commande <command>at</command> prévoit l'exécution d'une commande à un moment ultérieur. Elle prend l'horaire et la date prévus en paramètres sur sa ligne de commande, et la commande à exécuter sur son entrée standard. La commande sera exécutée comme si elle avait été saisie dans un interpréteur de commandes. <command>at</command> conserve d'ailleurs l'environnement courant afin de pouvoir travailler exactement dans les mêmes conditions que celles de la planification. L'horaire est indiqué en suivant les conventions habituelles : <literal>16:12</literal> représente 16 h 12. La date peut être précisée au format <literal>JJ.MM.AA</literal> (<literal>27.07.15</literal> représentant ainsi 27 juillet 2015) ou <literal>AAAA-MM-JJ</literal> (cette même date étant alors représentée par <literal>2015-07-27</literal>). En son absence, la commande sera exécutée dès que l'horloge atteindra l'heure signalée (le jour même ou le lendemain). On peut encore écrire explicitement <foreignphrase>today</foreignphrase> (aujourd'hui) ou <foreignphrase>tomorrow</foreignphrase> (demain)."
2529
2530 #, fuzzy
2531 #| msgid ""
2532 #| "\n"
2533 #| "<computeroutput>$ </computeroutput><userinput>at 09:00 27.07.15 &lt;&lt;END</userinput>\n"
2534 #| "<computeroutput>&gt; </computeroutput><userinput>echo \"Don't forget to wish a Happy Birthday to Raphaël!\" \\</userinput>\n"
2535 #| "<computeroutput>&gt; </computeroutput><userinput> | mail [email protected]</userinput>\n"
2536 #| "<computeroutput>&gt; </computeroutput><userinput>END</userinput>\n"
2537 #| "<computeroutput>warning: commands will be executed using /bin/sh\n"
2538 #| "job 31 at Mon Jul 27 09:00:00 2015</computeroutput>"
2539 msgid ""
2540 "\n"
2541 "<computeroutput>$ </computeroutput><userinput>at 09:00 27.07.22 &lt;&lt;END</userinput>\n"
2542 "<computeroutput>&gt; </computeroutput><userinput>echo \"Don't forget to wish a Happy Birthday to Raphaël!\" \\</userinput>\n"
2543 "<computeroutput>&gt; </computeroutput><userinput> | mail [email protected]</userinput>\n"
2544 "<computeroutput>&gt; </computeroutput><userinput>END</userinput>\n"
2545 "<computeroutput>warning: commands will be executed using /bin/sh\n"
2546 "job 1 at Wed Jul 27 09:00:00 2022</computeroutput>"
2547 msgstr ""
2548 "\n"
2549 "<computeroutput>$ </computeroutput><userinput>at 09:00 27.07.15 &lt;&lt;FIN</userinput>\n"
2550 "<computeroutput>&gt; </computeroutput><userinput>echo \"Penser à souhaiter un bon anniversaire à Raphaël\" \\</userinput>\n"
2551 "<computeroutput>&gt; </computeroutput><userinput> | mail [email protected]</userinput>\n"
2552 "<computeroutput>&gt; </computeroutput><userinput>FIN</userinput>\n"
2553 "<computeroutput>warning: commands will be executed using /bin/sh\n"
2554 "job 31 at Mon Jul 27 09:00:00 2015</computeroutput>"
2555
2556 msgid "An alternative syntax postpones the execution for a given duration: <command>at now + <replaceable>number</replaceable> <replaceable>period</replaceable></command>. The <replaceable>period</replaceable> can be <literal>minutes</literal>, <literal>hours</literal>, <literal>days</literal>, or <literal>weeks</literal>. The <replaceable>number</replaceable> simply indicates the number of said units that must elapse before execution of the command."
2557 msgstr "Une autre syntaxe permet d'exprimer une durée d'attente : <command>at now + <replaceable>nombre</replaceable> <replaceable>période</replaceable></command>. La <replaceable>période</replaceable> peut valoir <literal>minutes</literal>, <literal>hours</literal> (heures), <literal>days</literal> (jours) ou <literal>weeks</literal> (semaines). Le <replaceable>nombre</replaceable> indique simplement le nombre de ces unités qui doivent s'écouler avant exécution de la commande."
2558
2559 msgid "To cancel a task scheduled by <command>cron</command>, simply run <command>crontab -e</command> and delete the corresponding line in the <emphasis>crontab</emphasis> file. For <command>at</command> tasks, it is almost as easy: run <command>atrm <replaceable>task-number</replaceable></command>. The task number is indicated by the <command>at</command> command when you scheduled it, but you can find it again with the <command>atq</command> command, which gives the current list of scheduled tasks."
2560 msgstr "Pour annuler une tâche planifiée pour <command>cron</command>, il suffit, lors d'un appel à <command>crontab -e</command>, de supprimer la ligne correspondante dans la <emphasis>crontab</emphasis> où la tâche est définie. Pour les tâches <command>at</command>, c'est à peine plus complexe : il suffit d'exécuter la commande <command>atrm <replaceable>numéro-de-tâche</replaceable></command>. Le numéro de tâche est indiqué par la commande <command>at</command> lors de la planification mais on pourra le retrouver grâce à la commande <command>atq</command>, qui donne la liste des commandes actuellement planifiées."
2561
2562 msgid "<primary><command>atrm</command></primary>"
2563 msgstr "<primary><command>atrm</command></primary>"
2564
2565 msgid "<primary><command>atq</command></primary>"
2566 msgstr "<primary><command>atq</command></primary>"
2567
2568 msgid "Scheduling Asynchronous Tasks: <command>anacron</command>"
2569 msgstr "Planification asynchrone : <command>anacron</command>"
2570
2571 #, fuzzy
2572 #| msgid "<primary><command>anacron</command></primary>"
2573 msgid "<primary><command>anacron</command></primary><seealso><command>cron</command></seealso>"
2574 msgstr "<primary><command>anacron</command></primary>"
2575
2576 #, fuzzy
2577 #| msgid "<primary>files</primary><secondary>log files</secondary>"
2578 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/anacrontab</filename></secondary>"
2579 msgstr "<primary>fichier</primary><secondary>de logs</secondary>"
2580
2581 msgid "<command>anacron</command> is the daemon that completes <command>cron</command> for computers that are not on at all times. Since regular tasks are usually scheduled for the middle of the night, they will never be executed if the computer is off at that time. The purpose of <command>anacron</command> is to execute them, taking into account periods in which the computer is not working."
2582 msgstr "<command>anacron</command> est le démon qui complète <command>cron</command> pour les ordinateurs non allumés en permanence. Les tâches régulières étant habituellement planifiées au milieu de la nuit, elles ne seront jamais exécutées si la machine est éteinte à ce moment-là. La fonction d'<command>anacron</command> est de les exécuter en prenant en compte les périodes où l'ordinateur ne fonctionne pas."
2583
2584 #, fuzzy
2585 #| msgid "<primary><command>init</command></primary>"
2586 msgid "<primary><command>nice</command></primary>"
2587 msgstr "<primary><command>init</command></primary>"
2588
2589 msgid "Please note that <command>anacron</command> will frequently execute such activity a few minutes after booting the machine, which can render the computer less responsive. This is why the tasks in the <filename>/etc/anacrontab</filename> file are started with the <command>nice</command> command, which reduces their execution priority and thus limits their impact on the rest of the system. Beware, the format of this file is not the same as that of <filename>/etc/crontab</filename>; if you have particular needs for <command>anacron</command>, see the <citerefentry><refentrytitle>anacrontab</refentrytitle> <manvolnum>5</manvolnum></citerefentry> manual page."
2590 msgstr "Attention, <command>anacron</command> fera fréquemment exécuter cette activité en retard quelques minutes après le démarrage de la machine, ce qui peut en perturber la réactivité. C'est pourquoi les tâches du fichier <filename>/etc/anacrontab</filename> sont démarrées sous la commande <command>nice</command>, qui réduit leur priorité d'exécution et limitera donc l'impression de lenteur du reste du système. Attention, le format de ce fichier n'est pas le même que celui de <filename>/etc/crontab</filename> ; si vous avez des besoins particuliers avec <command>anacron</command>, consultez la page de manuel <citerefentry><refentrytitle>anacrontab</refentrytitle> <manvolnum>5</manvolnum></citerefentry>."
2591
2592 msgid "<emphasis>BACK TO BASICS</emphasis> Priorities and <command>nice</command>"
2593 msgstr "<emphasis>B.A.-BA</emphasis> Priorité, <command>nice</command>"
2594
2595 #, fuzzy
2596 #| msgid "<primary><command>rsync</command></primary>"
2597 msgid "<primary><command>renice</command></primary>"
2598 msgstr "<primary><command>rsync</command></primary>"
2599
2600 #, fuzzy
2601 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
2602 msgid "<primary>niceness</primary><seealso><command>nice</command></seealso>"
2603 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
2604
2605 #, fuzzy
2606 #| msgid "Unix systems (and thus Linux) are multi-tasking and multi-user systems. Indeed, several processes can run in parallel, and be owned by different users: the kernel mediates access to the resources between the different processes. As a part of this task, it has a concept of priority, which allows it to favor certain processes over others, as needed. When you know that a process can run in low priority, you can indicate so by running it with <command>nice <replaceable>program</replaceable></command>. The program will then have a smaller share of the CPU, and will have a smaller impact on other running processes. Of course, if no other processes needs to run, the program will not be artificially held back."
2607 msgid "Unix systems (and thus Linux) are multi-tasking and multi-user systems. Indeed, several processes can run in parallel, and be owned by different users: the kernel mediates access to the resources between the different processes. As a part of this task, it has a concept of priority, which allows it to favor certain processes over others, as needed. When you know that a process can run in low priority, you can indicate so by running it with <command>nice <replaceable>program</replaceable></command>. The program will then have a smaller share of the CPU, and will have a smaller impact on other running processes. Of course, if no other process needs to run, the program will not be artificially held back."
2608 msgstr "Les systèmes Unix (et donc Linux) sont éminemment multi-tâches et multi-utilisateurs. Plusieurs processus peuvent en effet tourner en parallèle, appartenant à plusieurs utilisateurs différents, le noyau se chargeant d'assurer la répartition des ressources entre les différents processus. Il gère pour cela une notion de priorité, qui lui permet de favoriser certains processus au détriment d'autres selon les besoins. Lorsque l'on sait qu'un processus peut tourner en basse priorité, on le signale lors de son lancement, en utilisant <command>nice <replaceable>programme</replaceable></command> (<foreignphrase>nice</foreignphrase> signifiant « gentil, agréable »). Le programme disposera alors d'une proportion amoindrie des ressources du système, il perturbera donc moins les autres processus s'ils ont besoin de fonctionner. Bien entendu, si aucun autre processus n'a besoin de ressources, le programme ne sera pas artificiellement ralenti."
2609
2610 msgid "<command>nice</command> works with levels of “niceness”: the positive levels (from 1 to 19) progressively lower the priority, while the negative levels (from -1 to -20) will increase it — but only root can use these negative levels. Unless otherwise indicated (see the <citerefentry><refentrytitle>nice</refentrytitle> <manvolnum>1</manvolnum></citerefentry> manual page), <command>nice</command> increases the current level by 10."
2611 msgstr "<command>nice</command> fonctionne avec des niveaux de « gentillesse » : les niveaux positifs (de 1 à 19) rendent progressivement un processus moins prioritaire, les niveaux négatifs (de -1 à -20) le rendent au contraire plus avide de ressources — mais seul le super-utilisateur est autorisé à utiliser ces niveaux négatifs. Sauf indication contraire (voir la page de manuel <citerefentry><refentrytitle>nice</refentrytitle> <manvolnum>1</manvolnum></citerefentry>), <command>nice</command> utilise le niveau 10."
2612
2613 msgid "If you discover that an already running task should have been started with <command>nice</command> it is not too late to fix it; the <command>renice</command> command changes the priority of an already running process, in either direction (but reducing the “niceness” of a process is reserved for the root user)."
2614 msgstr "Si l'on s'aperçoit qu'une tâche déjà lancée aurait dû l'être avec <command>nice</command>, il n'est pas trop tard pour réagir : la commande <command>renice</command> permet de changer la priorité d'un processus déjà existant, dans un sens ou dans l'autre (mais diminuer la « gentillesse » d'un processus est réservé au super-utilisateur)."
2615
2616 msgid "Installation of the <emphasis role=\"pkg\">anacron</emphasis> package deactivates execution by <command>cron</command> of the scripts in the <filename>/etc/cron.hourly/</filename>, <filename>/etc/cron.daily/</filename>, <filename>/etc/cron.weekly/</filename>, and <filename>/etc/cron.monthly/</filename> directories. This avoids their double execution by <command>anacron</command> and <command>cron</command>. The <command>cron</command> command remains active and will continue to handle the other scheduled tasks (especially those scheduled by users)."
2617 msgstr "L'installation du paquet <emphasis role=\"pkg\">anacron</emphasis> désactive l'exécution par <command>cron</command> des scripts des fichiers <filename>/etc/cron.hourly/</filename>, <filename>/etc/cron.daily/</filename>, <filename>/etc/cron.weekly/</filename> et <filename>/etc/cron.monthly/</filename>. On évite ainsi qu'ils soient pris en compte à la fois par <command>anacron</command> et par <command>cron</command>. Mais <command>cron</command> reste actif et se chargera encore d'exécuter les autres commandes planifiées (notamment par les utilisateurs)."
2618
2619 msgid "Quotas"
2620 msgstr "Les quotas"
2621
2622 msgid "<primary>quota</primary>"
2623 msgstr "<primary>quota</primary>"
2624
2625 msgid "The quota system allows limiting disk space allocated to a user or group of users. To set it up, you must have a kernel that supports it (compiled with the <varname>CONFIG_QUOTA</varname> option) — as is the case with Debian kernels. The quota management software is found in the <emphasis role=\"pkg\">quota</emphasis> Debian package."
2626 msgstr "Le système des quotas permet de limiter l'espace disque alloué à un utilisateur ou un groupe d'utilisateurs. Pour le mettre en place, il faut disposer d'un noyau activant sa prise en charge (option de compilation <varname>CONFIG_QUOTA</varname>) — ce qui est le cas des noyaux Debian. Les logiciels de gestion des quotas se trouvent dans le paquet Debian <emphasis role=\"pkg\">quota</emphasis>."
2627
2628 #, fuzzy
2629 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
2630 msgid "<primary><literal>usrquota</literal></primary><seealso>quota</seealso>"
2631 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
2632
2633 #, fuzzy
2634 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
2635 msgid "<primary><literal>grpquota</literal></primary><seealso>quota</seealso>"
2636 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
2637
2638 msgid "To activate quota in a filesystem, you have to indicate the <literal>usrquota</literal> and <literal>grpquota</literal> options in <filename>/etc/fstab</filename> for the user and group quotas, respectively. Rebooting the computer will then update the quotas in the absence of disk activity (a necessary condition for proper accounting of already used disk space)."
2639 msgstr "Pour activer les quotas sur un système de fichiers, il faut mentionner, dans le fichier <filename>/etc/fstab</filename>, les options <literal>usrquota</literal> et <literal>grpquota</literal>, respectivement pour des quotas utilisateurs ou de groupes. Redémarrer l'ordinateur permet ensuite de mettre à jour les quotas en l'absence d'activité disque (condition nécessaire à une bonne comptabilisation de l'espace disque déjà consommé)."
2640
2641 msgid "<primary><command>edquota</command></primary>"
2642 msgstr "<primary><command>edquota</command></primary>"
2643
2644 #, fuzzy
2645 #| msgid "<primary>user</primary><secondary>owner</secondary>"
2646 msgid "<primary>quota</primary><secondary><command>edquota</command></secondary>"
2647 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
2648
2649 msgid "The <command>edquota <replaceable>user</replaceable></command> (or <command>edquota -g <replaceable>group</replaceable></command>) command allows you to change the limits while examining current disk space usage."
2650 msgstr "La commande <command>edquota <replaceable>utilisateur</replaceable></command> (ou <command>edquota -g <replaceable>groupe</replaceable></command>) permet de changer les limites tout en consultant la consommation actuelle."
2651
2652 msgid "<emphasis>GOING FURTHER</emphasis> Defining quotas with a script"
2653 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> Définir les quotas par script"
2654
2655 msgid "<primary><command>setquota</command></primary>"
2656 msgstr "<primary><command>setquota</command></primary>"
2657
2658 #, fuzzy
2659 #| msgid "<primary>user</primary><secondary>owner</secondary>"
2660 msgid "<primary>quota</primary><secondary><command>setquota</command></secondary>"
2661 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
2662
2663 msgid "The <command>setquota</command> program can be used in a script to automatically change many quotas. Its <citerefentry><refentrytitle>setquota</refentrytitle> <manvolnum>8</manvolnum></citerefentry> manual page details the syntax to use."
2664 msgstr "Le programme <command>setquota</command> peut être employé dans un script pour modifier automatiquement de nombreux quotas. Sa page de manuel <citerefentry><refentrytitle>setquota</refentrytitle> <manvolnum>8</manvolnum></citerefentry> détaille la syntaxe précise à employer."
2665
2666 msgid "The quota system allows you to set four limits:"
2667 msgstr "Le système de quotas permet de définir quatre limites :"
2668
2669 #, fuzzy
2670 #| msgid "two limits (called “soft” and “hard”) refer to the number of blocks consumed. If the filesystem was created with a block-size of 1 kibibyte, a block contains 1024 bytes from the same file. Unsaturated blocks thus induce losses of disk space. A quota of 100 blocks, which theoretically allows storage of 102,400 bytes, will however be saturated with just 100 files of 500 bytes each, only representing 50,000 bytes in total."
2671 msgid "two limits (called “soft” and “hard”) refer to the number of blocks consumed. If the filesystem was created with a block-size of 1 kibibyte, the 1024 available bytes of each block can only be assigned to one file. Unsaturated blocks thus induce losses of disk space. A quota of 100 blocks, which theoretically allows storage of 102,400 bytes, will, however, be saturated with just 100 files of 500 bytes each, only representing 50,000 bytes in total."
2672 msgstr "Deux limites (<foreignphrase>soft</foreignphrase> et <foreignphrase>hard</foreignphrase>, respectivement douce et dure) concernent le nombre de blocs consommés. Si le système de fichiers a été créé avec une taille de bloc de 1 kilo-octet, un bloc contient 1 024 octets du même fichier. Les blocs non saturés induisent donc des pertes d'espace disque. Un quota de 100 blocs, qui permet théoriquement de stocker 102 400 octets, sera pourtant saturé par 100 fichiers de 500 octets, ne représentant que 50 000 octets au total."
2673
2674 #, fuzzy
2675 #| msgid "two limits (soft and hard) refer to the number of inodes used. Each file occupies at least one inode to store information about it (permissions, owner, timestamp of last access, etc.). It is thus a limit on the number of user files."
2676 msgid "two limits (“soft” and “hard”) refer to the number of inodes used. Each file occupies at least one inode to store information about it (permissions, owner, timestamp of last access, etc.). It is thus a limit on the number of user files."
2677 msgstr "Deux limites (<foreignphrase>soft</foreignphrase> et <foreignphrase>hard</foreignphrase>) concernent le nombre d'<foreignphrase>inodes</foreignphrase> employés. Chaque fichier consomme au moins un <foreignphrase>inode</foreignphrase> pour stocker les informations le concernant (droits, propriétaires, date de dernier accès, etc.). Il s'agit donc d'une limite sur le nombre de fichiers de l'utilisateur."
2678
2679 msgid "<primary>inode</primary>"
2680 msgstr "<primary><foreignphrase>inode</foreignphrase></primary>"
2681
2682 #, fuzzy
2683 #| msgid "<primary>login</primary><secondary>remote login</secondary>"
2684 msgid "<primary>quota</primary><secondary>soft limit</secondary>"
2685 msgstr "<primary>connexion</primary><secondary>à distance</secondary>"
2686
2687 #, fuzzy
2688 #| msgid "<primary>link</primary><secondary>hard link</secondary>"
2689 msgid "<primary>quota</primary><secondary>hard limit</secondary>"
2690 msgstr "<primary>lien</primary><secondary>dur</secondary>"
2691
2692 msgid "A “soft” limit can be temporarily exceeded; the user will simply be warned that they are exceeding the quota by the <command>warnquota</command> command, which is usually invoked by <command>cron</command>. A “hard” limit can never be exceeded: the system will refuse any operation that will cause a hard quota to be exceeded."
2693 msgstr "Une limite <foreignphrase>soft</foreignphrase> peut être franchie temporairement ; l'utilisateur sera simplement averti de son dépassement de quota par le programme <command>warnquota</command>, habituellement invoqué par <command>cron</command>. Une limite <foreignphrase>hard</foreignphrase> ne peut jamais être franchie : le système refusera toute opération provoquant un dépassement du quota dur."
2694
2695 #, fuzzy
2696 #| msgid "<primary>log</primary><secondary>forwarding</secondary>"
2697 msgid "<primary>quota</primary><secondary><command>warnquota</command></secondary>"
2698 msgstr "<primary><foreignphrase>log</foreignphrase></primary> <secondary>déporté</secondary>"
2699
2700 msgid "<emphasis>VOCABULARY</emphasis> Blocks and inodes"
2701 msgstr "<emphasis>VOCABULAIRE</emphasis> Blocs et <foreignphrase>inodes</foreignphrase>"
2702
2703 msgid "<primary>block (disk)</primary>"
2704 msgstr "<primary>bloc (disque)</primary>"
2705
2706 msgid "The filesystem divides the hard drive into blocks — small contiguous areas. The size of these blocks is defined during creation of the filesystem, and generally varies between 1 and 8 kibibytes."
2707 msgstr "Le système de fichiers découpe le disque dur en blocs, petites zones contiguës. La taille de ces blocs est déterminée lors de la création du système de fichiers et varie généralement entre 1 et 8 ko."
2708
2709 msgid "A block can be used either to store the real data of a file, or for meta-data used by the filesystem. Among this meta-data, you will especially find the inodes. An inode uses a block on the hard drive (but this block is not taken into consideration in the block quota, only in the inode quota), and contains both the information on the file to which it corresponds (name, owner, permissions, etc.) and the pointers to the data blocks that are actually used. For very large files that occupy more blocks than it is possible to reference in a single inode, there is an indirect block system; the inode references a list of blocks that do not directly contain data, but another list of blocks."
2710 msgstr "Un bloc peut être utilisé soit pour stocker des données réelles du fichier, soit des métadonnées utilisées par le système de fichiers. Parmi ces métadonnées, on trouve notamment les <foreignphrase>inodes</foreignphrase> (terme parfois traduit par « i-nœuds » mais généralement laissé tel quel). Un inode utilise un bloc sur le disque (mais ce bloc n'est pas pris en compte dans le quota de blocs, seulement dans le quota d'inodes) et contient à la fois des informations sur le fichier qu'il concerne (nom, propriétaire, permissions etc.) et des pointeurs vers les blocs de données réellement utilisés. Pour les fichiers volumineux occupant plus de blocs qu'il n'est possible d'en référencer dans un seul inode, il y a même un système de blocs indirects : l'inode référence une liste de blocs ne contenant pas directement des données mais une autre liste de blocs."
2711
2712 msgid "With the <command>edquota -t</command> command, you can define a maximum authorized “grace period” within which a soft limit may be exceeded. After this period, the soft limit will be treated like a hard limit, and the user will have to reduce their disk space usage to within this limit in order to be able to write anything to the hard drive."
2713 msgstr "On peut définir, par la commande <command>edquota -t</command>, une « période de grâce » maximale autorisée pour un dépassement de limite <foreignphrase>soft</foreignphrase>. Ce délai écoulé, la limite <foreignphrase>soft</foreignphrase> se comportera comme une limite <foreignphrase>hard</foreignphrase> et l'utilisateur devra donc repasser sous elle pour pouvoir à nouveau écrire quoi que ce soit sur le disque."
2714
2715 msgid "<emphasis>GOING FURTHER</emphasis> Setting up a default quota for new users"
2716 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> Systématiser un quota pour les nouveaux utilisateurs"
2717
2718 #, fuzzy
2719 #| msgid "<primary>user</primary><secondary>owner</secondary>"
2720 msgid "<primary>quota</primary><secondary><varname>QUOTAUSER</varname></secondary>"
2721 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
2722
2723 #, fuzzy
2724 #| msgid "<primary>service</primary><secondary>restart</secondary>"
2725 msgid "<primary>environment variable</primary><secondary><varname>QUOTAUSER</varname></secondary>"
2726 msgstr "<primary>service</primary><secondary>redémarrage</secondary>"
2727
2728 #, fuzzy
2729 #| msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
2730 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/adduser.conf</filename></secondary>"
2731 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
2732
2733 #, fuzzy
2734 #| msgid "<primary>owner</primary><secondary>user</secondary>"
2735 msgid "<primary>quota</primary><secondary>template user</secondary>"
2736 msgstr "<primary>propriétaire</primary><secondary>utilisateur</secondary>"
2737
2738 msgid "To automatically setup a quota for new users, you have to configure a template user (with <command>edquota</command> or <command>setquota</command>) and indicate their user name in the <varname>QUOTAUSER</varname> variable in the <filename>/etc/adduser.conf</filename> file. This quota configuration will then be automatically applied to each new user created with the <command>adduser</command> command."
2739 msgstr "Pour instaurer un quota systématique chez les nouveaux utilisateurs, il faut le configurer sur un utilisateur « modèle » (avec <command>edquota</command> ou <command>setquota</command>) et indiquer son nom dans la variable <varname>QUOTAUSER</varname> du fichier <filename>/etc/adduser.conf</filename>. Ce paramétrage sera alors automatiquement repris pour chaque nouvel utilisateur créé avec la commande <command>adduser</command>."
2740
2741 msgid "<primary>backup</primary>"
2742 msgstr "<primary>sauvegarde</primary>"
2743
2744 msgid "<primary>restoration</primary>"
2745 msgstr "<primary>restauration</primary>"
2746
2747 msgid "Making backups is one of the main responsibilities of any administrator, but it is a complex subject, involving powerful tools which are often difficult to master."
2748 msgstr "L'une des responsabilités principales de tout administrateur, la sauvegarde reste un sujet complexe dont les outils puissants sont en général difficiles à maîtriser."
2749
2750 msgid "<primary><command>amanda</command></primary>"
2751 msgstr "<primary><command>amanda</command></primary>"
2752
2753 msgid "<primary><command>bacula</command></primary>"
2754 msgstr "<primary><command>bacula</command></primary>"
2755
2756 #, fuzzy
2757 #| msgid "<primary><command>atd</command></primary>"
2758 msgid "<primary><command>dd</command></primary>"
2759 msgstr "<primary><command>atd</command></primary>"
2760
2761 #, fuzzy
2762 #| msgid "<primary><command>init</command></primary>"
2763 msgid "<primary><command>duplicity</command></primary>"
2764 msgstr "<primary><command>init</command></primary>"
2765
2766 #, fuzzy
2767 #| msgid "<primary><command>chgrp</command></primary>"
2768 msgid "<primary><command>fsarchiver</command></primary>"
2769 msgstr "<primary><command>chgrp</command></primary>"
2770
2771 msgid "<primary><command>BackupPC</command></primary>"
2772 msgstr "<primary><command>BackupPC</command></primary>"
2773
2774 #, fuzzy
2775 #| msgid "<primary><command>diff</command></primary>"
2776 msgid "<primary><command>rdiff-backup</command></primary>"
2777 msgstr "<primary><command>diff</command></primary>"
2778
2779 #, fuzzy
2780 #| msgid "<primary><command>rsh</command></primary>"
2781 msgid "<primary><command>rsnapshot</command></primary>"
2782 msgstr "<primary><command>rsh</command></primary>"
2783
2784 #, fuzzy
2785 #| msgid "<primary><command>init</command></primary>"
2786 msgid "<primary><command>timeshift</command></primary>"
2787 msgstr "<primary><command>init</command></primary>"
2788
2789 #, fuzzy
2790 #| msgid "Many programs exist, such as <command>amanda</command>, <command>bacula</command>, <command>BackupPC</command>. Those are client/server system featuring many options, whose configuration is rather difficult. Some of them provide user-friendly web interfaces to mitigate this. But Debian contains dozens of other backup software covering all possible use cases, as you can easily confirm with <command>apt-cache search backup</command>."
2791 msgid "Many programs exist, such as <command>amanda</command>, <command>bacula</command>, or <command>BackupPC</command>. Those are client/server systems featuring many options, whose configuration is rather difficult. Some of them provide user-friendly web interfaces to mitigate this. For non-enterprise systems, administrators might want to check out <command>rsnapshot</command> or <command>rdiff-backup</command>. Users can easily create backups of their filesystems with <command>timeshift</command>, <command>fsarchiver</command>, <command>duplicity</command>, or even <command>dd</command>."
2792 msgstr "De nombreux logiciels existent : citons <command>amanda</command>, <command>bacula</command> et <command>BackupPC</command>. Il s'agit de systèmes client/serveur dotés de nombreuses options, dont la configuration peut être difficile. Certains disposent d'une interface de configuration web. Des dizaines d'autres paquets Debian sont dédiés à des solutions de sauvegarde, comme vous le montrera la commande <command>apt-cache search backup</command>."
2793
2794 msgid "Debian contains dozens of other backup software covering all possible use cases, as you can easily confirm with <command>apt-cache search backup</command>."
2795 msgstr ""
2796
2797 msgid "Rather than detailing some of them, this section will present the thoughts of the Falcot Corp administrators when they defined their backup strategy."
2798 msgstr "Plutôt que de détailler le fonctionnement de certains d'entre eux, nous prenons le parti d'exposer la réflexion menée par les administrateurs de Falcot SA pour définir leur stratégie de sauvegarde."
2799
2800 msgid "At Falcot Corp, backups have two goals: recovering erroneously deleted files, and quickly restoring any computer (server or desktop) whose hard drive has failed."
2801 msgstr "Chez Falcot SA, les sauvegardes répondent à deux besoins : récupérer des fichiers supprimés par erreur et remettre en route rapidement tout ordinateur (serveur ou bureautique) dont le disque dur subit une panne."
2802
2803 msgid "Backing Up with <command>rsync</command>"
2804 msgstr "Sauvegarde avec <command>rsync</command>"
2805
2806 msgid "<primary><command>rsync</command></primary>"
2807 msgstr "<primary><command>rsync</command></primary>"
2808
2809 msgid "Backups on tape having been deemed too slow and costly, data will be backed up on hard drives on a dedicated server, on which the use of software RAID (see <xref linkend=\"sect.raid-soft\" />) will protect the data from hard drive failure. Desktop computers are not backed up individually, but users are advised that their personal account on their department's file server will be backed up. The <command>rsync</command> command (from the package of the same name) is used daily to back up these different servers."
2810 msgstr "Les sauvegardes sur bandes ayant été jugées trop lentes et trop coûteuses, les données seront sauvegardées sur les disques durs d'un serveur dédié, où l'emploi du RAID logiciel (détaillé dans la <xref linkend=\"sect.raid-soft\" />) les protégera d'une défaillance du disque. Les ordinateurs bureautiques ne sont pas sauvegardés individuellement, mais les utilisateurs sont informés que leur compte personnel, situé sur le serveur de fichiers de leur département, sera sauvegardé. La commande <command>rsync</command> (du paquet éponyme) sauvegarde quotidiennement ces différents serveurs."
2811
2812 msgid "<emphasis>BACK TO BASICS</emphasis> The hard link, a second name for the file"
2813 msgstr "<emphasis>B.A.-BA</emphasis> Le lien dur, un deuxième nom pour le fichier"
2814
2815 msgid "<primary>link</primary><secondary>hard link</secondary>"
2816 msgstr "<primary>lien</primary><secondary>dur</secondary>"
2817
2818 msgid "<primary>hard link</primary>"
2819 msgstr "<primary>dur, lien</primary>"
2820
2821 #, fuzzy
2822 #| msgid "<primary><command>telnet</command></primary>"
2823 msgid "<primary><command>ln</command></primary>"
2824 msgstr "<primary><command>telnet</command></primary>"
2825
2826 msgid "A hard link, as opposed to a symbolic link, cannot be differentiated from the linked file. Creating a hard link is essentially the same as giving an existing file a second name. This is why the deletion of a hard link only removes one of the names associated with the file. As long as another name is still assigned to the file, the data therein remain present on the filesystem. It is interesting to note that, unlike a copy, the hard link does not take up additional space on the hard drive."
2827 msgstr "Un lien dur <foreignphrase>(hardlink)</foreignphrase>, contrairement au lien symbolique, ne peut être différencié du fichier pointé. Créer un lien dur revient en fait à affecter un deuxième nom à un fichier déjà existant (cible). C'est pourquoi la suppression d'un lien dur ou de la cible ne supprime en fait qu'un des noms associés au fichier. Tant qu'un nom est encore affecté au fichier, les données de celui-ci restent présentes sur le système de fichiers. Il est intéressant de noter que contrairement à une copie, le lien dur ne consomme pas d'espace disque supplémentaire."
2828
2829 msgid "A hard link is created with the <command>ln <replaceable>target</replaceable> <replaceable>link</replaceable></command> command. The <replaceable>link</replaceable> file is then a new name for the <replaceable>target</replaceable> file. Hard links can only be created on the same filesystem, while symbolic links are not subject to this limitation."
2830 msgstr "Le lien dur se crée avec la commande <command>ln <replaceable>cible</replaceable> <replaceable>lien</replaceable></command>. Le fichier <replaceable>lien</replaceable> est alors un nouveau nom du fichier <replaceable>cible</replaceable>. Les liens durs ne peuvent être créés qu'au sein d'un même système de fichiers, alors que les liens symboliques ne souffrent pas de cette limitation."
2831
2832 msgid "The available hard drive space prohibits implementation of a complete daily backup. As such, the <command>rsync</command> command is preceded by a duplication of the content of the previous backup with hard links, which prevents usage of too much hard drive space. The <command>rsync</command> process then only replaces files that have been modified since the last backup. With this mechanism a great number of backups can be kept in a small amount of space. Since all backups are immediately available and accessible (for example, in different directories of a given share on the network), you can quickly make comparisons between two given dates."
2833 msgstr "L'espace disque disponible interdit la mise en place d'une sauvegarde complète quotidienne. C'est pourquoi la synchronisation par <command>rsync</command> est précédée d'une duplication du contenu de la dernière sauvegarde par des liens durs <foreignphrase>(hard links)</foreignphrase>, qui évitent de consommer trop d'espace disque. Le processus <command>rsync</command> ne remplacera ensuite que les fichiers modifiés depuis la dernière sauvegarde. Ce mécanisme permet de conserver un grand nombre de sauvegardes sur un volume réduit. Toutes les sauvegardes étant accessibles en même temps (par exemple dans des répertoires différents d'un même volume accessible à travers le réseau), on pourra effectuer rapidement des comparaisons entre deux dates données."
2834
2835 msgid "<primary>copy, backup copy</primary>"
2836 msgstr "<primary>copie de sauvegarde</primary>"
2837
2838 msgid "<primary>backup</primary><secondary>copy</secondary>"
2839 msgstr "<primary>sauvegarde</primary><secondary>copie</secondary>"
2840
2841 msgid "<primary><emphasis role=\"pkg\">dirvish</emphasis></primary>"
2842 msgstr "<primary><emphasis role=\"pkg\">dirvish</emphasis></primary>"
2843
2844 msgid "This backup mechanism is easily implemented with the <command>dirvish</command> program. It uses a backup storage space (“bank” in its vocabulary) in which it places timestamped copies of sets of backup files (these sets are called “vaults” in the dirvish documentation)."
2845 msgstr "Ce mécanisme de sauvegarde se met facilement en place à l'aide du programme <command>dirvish</command>. Il emploie un espace de stockage des sauvegardes (<foreignphrase>bank</foreignphrase>, dans son vocabulaire) dans lequel il place les différentes copies horodatées des ensembles de fichiers sauvegardés (ces ensembles sont nommés <foreignphrase>vaults</foreignphrase>, donc « chambre forte », dans la documentation de <command>dirvish</command>)."
2846
2847 #, fuzzy
2848 #| msgid "<primary>interface</primary><secondary>administration interface</secondary>"
2849 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/dirvish/master.conf</filename></secondary>"
2850 msgstr "<primary>interface</primary><secondary>d'administration</secondary>"
2851
2852 msgid "The main configuration is in the <filename>/etc/dirvish/master.conf</filename> file. It defines the location of the backup storage space, the list of “vaults” to manage, and default values for expiration of the backups. The rest of the configuration is located in the <filename><replaceable>bank</replaceable>/<replaceable>vault</replaceable>/dirvish/default.conf</filename> files and contains the specific configuration for the corresponding set of files."
2853 msgstr "La configuration principale se trouve dans le fichier <filename>/etc/dirvish/master.conf</filename>. Elle indique l'emplacement de l'espace de stockage des sauvegardes, la liste des ensembles à sauvegarder ainsi que des valeurs par défaut pour l'expiration des sauvegardes. Le reste de la configuration se trouve dans les fichiers <filename><replaceable>bank</replaceable>/<replaceable>vault</replaceable>/dirvish/default.conf</filename> et contient à chaque fois la configuration spécifique à l'ensemble de fichiers en question."
2854
2855 msgid "The <filename>/etc/dirvish/master.conf</filename> file"
2856 msgstr "Fichier <filename>/etc/dirvish/master.conf</filename>"
2857
2858 msgid ""
2859 "bank:\n"
2860 " /backup\n"
2861 "exclude:\n"
2862 " lost+found/\n"
2863 " core\n"
2864 " *~\n"
2865 "Runall:\n"
2866 " root 22:00\n"
2867 "expire-default: +15 days\n"
2868 "expire-rule:\n"
2869 "# MIN HR DOM MON DOW STRFTIME_FMT\n"
2870 " * * * * 1 +3 months\n"
2871 " * * 1-7 * 1 +1 year\n"
2872 " * * 1-7 1,4,7,10 1"
2873 msgstr ""
2874 "bank:\n"
2875 " /backup\n"
2876 "exclude:\n"
2877 " lost+found/\n"
2878 " core\n"
2879 " *~\n"
2880 "Runall:\n"
2881 " root 22:00\n"
2882 "expire-default: +15 days\n"
2883 "expire-rule:\n"
2884 "# MIN HR DOM MON DOW STRFTIME_FMT\n"
2885 " * * * * 1 +3 months\n"
2886 " * * 1-7 * 1 +1 year\n"
2887 " * * 1-7 1,4,7,10 1"
2888
2889 #, fuzzy
2890 #| msgid "The <literal>bank</literal> setting indicates the directory in which the backups are stored. The <literal>exclude</literal> setting allows you to indicate files (or file types) to exclude from the backup. The <literal>Runall</literal> is a list of file sets to backup with a time-stamp for each set, which allows you to assign the correct date to the copy, in case the backup is not triggered at precisely the assigned time. You have to indicate a time just before the actual execution time (which is, by default, 10:04 pm in Debian, according to <filename>/etc/cron.d/dirvish</filename>). Finally, the <literal>expire-default</literal> and <literal>expire-rule</literal> settings define the expiration policy for backups. The above example keeps forever backups that are generated on the first Sunday of each quarter, deletes after one year those from the first Sunday of each month, and after 3 months those from other Sundays. Other daily backups are kept for 15 days. The order of the rules does matter, Dirvish uses the last matching rule, or the <literal>expire-default</literal> one if no other <literal>expire-rule</literal> matches."
2891 msgid "The <literal>bank</literal> setting indicates the directory in which the backups are stored. The <literal>exclude</literal> setting allows you to indicate files (or file types) to exclude from the backup. The <literal>Runall</literal> is a list of file sets to backup with a time-stamp for each set, which allows you to assign the correct date to the copy, in case the backup is not triggered at precisely the assigned time. You have to indicate a time just before the actual execution time (according to <filename>/etc/cron.d/dirvish</filename>). Finally, the <literal>expire-default</literal> and <literal>expire-rule</literal> settings define the expiration policy for backups. The above example keeps forever backups that are generated on the first Sunday of each quarter, deletes after one year those from the first Sunday of each month, and after 3 months those from other Sundays. Other daily backups are kept for 15 days. The order of the rules does matter, Dirvish uses the last matching rule, or the <literal>expire-default</literal> one if no other <literal>expire-rule</literal> matches."
2892 msgstr "Le paramètre <literal>bank</literal> indique le répertoire dans lequel les sauvegardes sont stockées. Le paramètre <literal>exclude</literal> permet d'indiquer des fichiers (ou des formes de noms de fichiers) à exclure de la sauvegarde. Le paramètre <literal>Runall</literal> est la liste des ensembles de fichiers à sauvegarder avec un horodatage pour chaque ensemble, ce dernier permet simplement d'attribuer la bonne date à la copie au cas où la sauvegarde ne se déclencherait pas exactement à l'heure prévue. Il faut indiquer un horaire légèrement inférieur à l'horaire réel d'exécution (qui est 22h04 par défaut sur un système Debian, selon <filename>/etc/cron.d/dirvish</filename>). Enfin, les paramètres <literal>expire-default</literal> et <literal>expire-rule</literal> définissent la politique d'expiration (donc de conservation) des sauvegardes. L'exemple précédent conserve pour toujours les sauvegardes générées le premier dimanche de chaque trimestre, détruit après un an celles du premier dimanche de chaque mois et après 3 mois celles des autres dimanches. Les autres sauvegardes quotidiennes sont conservées 15 jours. L'ordre des règles compte : <command>dirvish</command> emploie la dernière règle qui correspond, ou celle mentionnée dans <literal>expire-default</literal> si aucune des règles de <literal>expire-rule</literal> ne correspond."
2893
2894 msgid "<emphasis>IN PRACTICE</emphasis> Scheduled expiration"
2895 msgstr "<emphasis>EN PRATIQUE</emphasis> Expiration planifiée"
2896
2897 msgid "The expiration rules are not used by <command>dirvish-expire</command> to do its job. In reality, the expiration rules are applied when creating a new backup copy to define the expiration date associated with that copy. <command>dirvish-expire</command> simply peruses the stored copies and deletes those for which the expiration date has passed."
2898 msgstr "Les règles d'expiration ne sont pas employées par <command>dirvish-expire</command> pour faire son travail. En réalité, les règles d'expiration interviennent au moment de la création d'une nouvelle copie de sauvegarde pour définir une date d'expiration associée à cette copie. <command>dirvish-expire</command> se contente de parcourir les copies stockées et de supprimer celles dont la date d'expiration est dépassée."
2899
2900 msgid "The <filename>/backup/root/dirvish/default.conf</filename> file"
2901 msgstr "Fichier <filename>/backup/root/dirvish/default.conf</filename>"
2902
2903 msgid ""
2904 "client: rivendell.falcot.com\n"
2905 "tree: /\n"
2906 "xdev: 1\n"
2907 "index: gzip\n"
2908 "image-default: %Y%m%d\n"
2909 "exclude:\n"
2910 " /var/cache/apt/archives/*.deb\n"
2911 " /var/cache/man/**\n"
2912 " /tmp/**\n"
2913 " /var/tmp/**\n"
2914 " *.bak"
2915 msgstr ""
2916 "client: rivendell.falcot.com\n"
2917 "tree: /\n"
2918 "xdev: 1\n"
2919 "index: gzip\n"
2920 "image-default: %Y%m%d\n"
2921 "exclude:\n"
2922 " /var/cache/apt/archives/*.deb\n"
2923 " /var/cache/man/**\n"
2924 " /tmp/**\n"
2925 " /var/tmp/**\n"
2926 " *.bak"
2927
2928 msgid "The above example specifies the set of files to back up: these are files on the machine <emphasis>rivendell.falcot.com</emphasis> (for local data backup, simply specify the name of the local machine as indicated by <command>hostname</command>), especially those in the root tree (<literal>tree: /</literal>), except those listed in <literal>exclude</literal>. The backup will be limited to the contents of one filesystem (<literal>xdev: 1</literal>). It will not include files from other mount points. An index of saved files will be generated (<literal>index: gzip</literal>), and the image will be named according to the current date (<literal>image-default: %Y%m%d</literal>)."
2929 msgstr "L'exemple ci-dessus précise l'ensemble de fichiers à sauvegarder : il s'agit de fichiers sur la machine <emphasis>rivendell.falcot.com</emphasis> (pour une sauvegarde de données locales, il faut simplement préciser le nom de la machine locale tel que <command>hostname</command> le rapporte), en particulier ceux qui sont dans l'arborescence racine (<literal>tree: /</literal>) à l'exclusion de ceux listés dans <literal>exclude</literal>. La sauvegarde restera limitée au contenu d'un seul système de fichiers (<literal>xdev: 1</literal>), elle n'inclura pas les fichiers d'autres montages. Un index des fichiers sauvegardés sera généré (<literal>index: gzip</literal>) et l'image sera nommée selon la date du jour (<literal>image-default: %Y%m%d</literal>)."
2930
2931 #, fuzzy
2932 #| msgid "There are many options available, all documented in the <citerefentry><refentrytitle>dirvish.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> manual page. Once these configuration files are setup, you have to initialize each file set with the <command>dirvish --vault <replaceable>vault</replaceable> --init</command> command. From there on the daily invocation of <command>dirvish-runall</command> will automatically create a new backup copy just after having deleted those that expired."
2933 msgid "There are many options available, all documented in the <citerefentry><refentrytitle>dirvish.conf</refentrytitle> <manvolnum>5</manvolnum></citerefentry> manual page. Once these configuration files are setup, you have to initialize each file set with the <command>dirvish --vault <replaceable>vault</replaceable> --init</command> command. From there on the daily invocation of <command>dirvish-runall</command> will automatically create a new backup copy just after having deleted those that expired."
2934 msgstr "De nombreuses options existent, toutes documentées dans la page de manuel <citerefentry><refentrytitle>dirvish.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Une fois ces fichiers de configuration mis en place, il faut initialiser chaque ensemble de fichiers avec la commande <command>dirvish --vault <replaceable>vault</replaceable> --init</command>. Puis l'invocation quotidienne de <command>dirvish-runall</command> créera automatiquement une nouvelle copie de sauvegarde juste après avoir supprimé celles qui devaient l'être."
2935
2936 msgid "<emphasis>IN PRACTICE</emphasis> Remote backup over SSH"
2937 msgstr "<emphasis>EN PRATIQUE</emphasis> Sauvegarde distante par SSH"
2938
2939 msgid "When dirvish needs to save data to a remote machine, it will use <command>ssh</command> to connect to it, and will start <command>rsync</command> as a server. This requires the root user to be able to automatically connect to it. The use of an SSH authentication key allows precisely that (see <xref linkend=\"sect.ssh-key-based-auth\" />)."
2940 msgstr "Lorsque <command>dirvish</command> doit sauvegarder des données d'une machine distante, il va employer <command>ssh</command> pour s'y connecter et y démarrer <command>rsync</command> en tant que serveur. Cela nécessite donc que l'utilisateur root puisse se connecter automatiquement à la machine en question. L'emploi d'une clé d'authentification SSH permet précisément cela (voir <xref linkend=\"sect.ssh-key-based-auth\" />)."
2941
2942 msgid "Restoring Machines without Backups"
2943 msgstr "Restauration des machines non sauvegardées"
2944
2945 #, fuzzy
2946 #| msgid "Desktop computers, which are not backed up, will be easy to reinstall from custom DVD-ROMs prepared with <emphasis>Simple-CDD</emphasis> (see <xref linkend=\"sect.simple-cdd\" />). Since this performs an installation from scratch, it loses any customization that can have been made after the initial installation. This is fine since the systems are all hooked to a central LDAP directory for accounts and most desktop applications are preconfigured thanks to dconf (see <xref linkend=\"sect.gnome-desktop\" /> for more information about this)."
2947 msgid "Desktop computers, which are not backed up, will be easy to reinstall from custom DVD-ROMs/USB sticks prepared with <emphasis role=\"pkg\">simple-cdd</emphasis> (see <xref linkend=\"sect.simple-cdd\" />). Since this performs an installation from scratch, it loses any customization that can have been made after the initial installation. This is fine since the systems are all hooked to a central LDAP directory for accounts and most desktop applications are preconfigured thanks to <command>dconf</command> (see <xref linkend=\"sect.gnome-desktop\" /> for more information about this)."
2948 msgstr "Les ordinateurs bureautiques, qui ne sont pas sauvegardés, pourront être réinstallés à partir des DVD-Rom personnalisés préparés avec <emphasis>Simple-CDD</emphasis> (voir <xref linkend=\"sect.simple-cdd\" />). Comme il s'agit d'une installation à partir de zéro, cela perdra toute configuration qui aura été faite après l'installation initiale ; cela ne pose pas de problème, puisque tous les systèmes sont connectés à un annuaire LDAP qui centralise les comptes utilisateurs et la plupart des applications bureautiques sont préconfigurées par le biais de <command>dconf</command> (voir <xref linkend=\"sect.gnome-desktop\" /> à ce propos)."
2949
2950 msgid "The Falcot Corp administrators are aware of the limits in their backup policy. Since they can't protect the backup server as well as a tape in a fireproof safe, they have installed it in a separate room so that a disaster such as a fire in the server room won't destroy backups along with everything else. Furthermore, they do an incremental backup on DVD-ROM once per week — only files that have been modified since the last backup are included."
2951 msgstr "Les administrateurs de Falcot SA sont conscients des limites de leur politique de sauvegarde. Ne pouvant pas protéger le serveur de sauvegarde aussi bien qu'une bande dans un coffre ignifugé, ils l'ont installé dans une pièce séparée de sorte qu'un sinistre tel qu'un incendie se déclarant dans la salle des serveurs ne détruise pas aussi les sauvegardes. Par ailleurs, ils réalisent une sauvegarde incrémentale sur DVD-Rom une fois par semaine — seuls les fichiers modifiés depuis la dernière sauvegarde sont concernés."
2952
2953 msgid "<emphasis>GOING FURTHER</emphasis> Backing up SQL and LDAP services"
2954 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> Sauvegarde SQL, LDAP"
2955
2956 msgid "<primary><command>xdelta</command></primary>"
2957 msgstr "<primary><command>xdelta</command></primary>"
2958
2959 msgid "<primary><command>diff</command></primary>"
2960 msgstr "<primary><command>diff</command></primary>"
2961
2962 msgid "<primary>dump</primary>"
2963 msgstr "<primary><foreignphrase>dump</foreignphrase></primary>"
2964
2965 msgid "Many services (such as SQL or LDAP databases) cannot be backed up by simply copying their files (unless they are properly interrupted during creation of the backups, which is frequently problematic, since they are intended to be available at all times). As such, it is necessary to use an “export” mechanism to create a “data dump” that can be safely backed up. These are often quite large, but they compress well. To reduce the storage space required, you will only store a complete text file per week, and a <command>diff</command> each day, which is created with a command of the type <command>diff <replaceable>file_from_yesterday</replaceable> <replaceable>file_from_today</replaceable></command>. The <command>xdelta</command> program produces incremental differences from binary dumps."
2966 msgstr "De nombreux services (comme les bases de données SQL ou LDAP) ne peuvent pas être sauvegardés simplement en copiant leurs fichiers (sauf s'ils sont correctement interrompus durant la sauvegarde, ce qui pose souvent problème car ils sont prévus pour être disponibles en permanence). Il est alors nécessaire de faire appel à une procédure « d'export » des données, dont on sauvegardera alors le <foreignphrase>dump</foreignphrase>. Souvent volumineux, celui-ci se prête cependant bien à la compression. Pour réduire l'espace de stockage nécessaire, on ne stockera qu'un fichier texte complet par semaine et un <command>diff</command> chaque jour, ce dernier étant obtenu par une commande du type <command>diff <replaceable>fichier-de-la-veille</replaceable> <replaceable>fichier-du-jour</replaceable></command>. Le programme <command>xdelta</command> produira les différences incrémentales des <foreignphrase>dumps</foreignphrase> binaires."
2967
2968 msgid "<emphasis>CULTURE</emphasis> <emphasis>TAR</emphasis>, the standard for tape backups"
2969 msgstr "<emphasis>CULTURE</emphasis> <emphasis>TAR</emphasis>, standard de sauvegarde sur bande"
2970
2971 msgid "<primary>backup</primary><secondary>on tape</secondary>"
2972 msgstr "<primary>sauvegarde</primary><secondary>sur bande</secondary>"
2973
2974 msgid "<primary>tape, backup</primary>"
2975 msgstr "<primary>bande, sauvegarde</primary>"
2976
2977 #, fuzzy
2978 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
2979 msgid "<primary><acronym>TAR</acronym></primary><seealso>tape archive</seealso>"
2980 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
2981
2982 #, fuzzy
2983 #| msgid "<primary>tape, backup</primary>"
2984 msgid "<primary>tape archive</primary>"
2985 msgstr "<primary>bande, sauvegarde</primary>"
2986
2987 msgid "Historically, the simplest means of making a backup on Unix was to store a <emphasis>TAR</emphasis> archive on a tape. The <command>tar</command> command even got its name from “Tape ARchive”."
2988 msgstr "Historiquement, le moyen le plus simple de réaliser une sauvegarde sous Unix était de stocker sur bande une archive au format <emphasis>TAR</emphasis>. La commande <command>tar</command> tire d'ailleurs son nom de <foreignphrase>Tape ARchive</foreignphrase> (« archive sur bande »)."
2989
2990 msgid "Hot Plugging: <emphasis>hotplug</emphasis>"
2991 msgstr "Branchements « à chaud » : <emphasis>hotplug</emphasis>"
2992
2993 msgid "Introduction"
2994 msgstr "Introduction"
2995
2996 # TODO: INTEGRATE ALTERNATE STRING: <primary>chaud, branchement</primary>
2997 msgid "<primary>hotplug</primary>"
2998 msgstr "<primary>branchement à chaud</primary>"
2999
3000 #, fuzzy
3001 #| msgid "<primary>booting</primary><secondary>the system</secondary>"
3002 msgid "<primary>kernel</primary><secondary>hotplug subsystem</secondary>"
3003 msgstr "<primary>démarrage</primary><secondary>du système</secondary>"
3004
3005 #, fuzzy
3006 #| msgid "<primary><command>inetd</command></primary>"
3007 msgid "<primary><command>udevd</command></primary>"
3008 msgstr "<primary><command>inetd</command></primary>"
3009
3010 #, fuzzy
3011 #| msgid "<primary><filename>crontab</filename></primary>"
3012 msgid "<primary><filename>/dev</filename></primary>"
3013 msgstr "<primary><filename>crontab</filename></primary>"
3014
3015 #, fuzzy
3016 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
3017 msgid "<primary>device</primary><seealso><filename>/dev</filename></seealso>"
3018 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
3019
3020 msgid "<primary>USB</primary>"
3021 msgstr "<primary>USB</primary>"
3022
3023 msgid "<primary>IEEE 1394</primary>"
3024 msgstr "<primary>IEEE 1394</primary>"
3025
3026 msgid "<primary>PCMCIA</primary>"
3027 msgstr "<primary>PCMCIA</primary>"
3028
3029 msgid "<primary>SATA</primary>"
3030 msgstr "<primary>SATA</primary>"
3031
3032 #, fuzzy
3033 #| msgid "The <emphasis>hotplug</emphasis> kernel subsystem dynamically handles the addition and removal of devices, by loading the appropriate drivers and by creating the corresponding device files (with the help of <command>udevd</command>). With modern hardware and virtualization, almost everything can be hotplugged: from the usual USB/PCMCIA/IEEE 1394 peripherals to SATA hard drives, but also the CPU and the memory."
3034 msgid "The <emphasis>hotplug</emphasis> kernel subsystem dynamically handles the addition and removal of devices, by loading the appropriate drivers and by creating the corresponding device files (with the help of <command>udevd</command>). With modern hardware and virtualization, almost everything can be “hotplugged“: from the usual USB/PCMCIA/IEEE 1394 peripherals to SATA hard drives, but also the CPU and the memory."
3035 msgstr "Le sous-système <emphasis>hotplug</emphasis> du noyau permet de charger les pilotes des périphériques et de créer les fichiers de périphériques correspondants (avec l'aide d'<command>udevd</command>). Avec le matériel moderne et la virtualisation, quasiment tous les périphériques peuvent être connectés à chaud, depuis les classiques USB/PCMCIA/IEEE 1394 et les disques durs SATA jusqu'au processeur et à la mémoire eux-mêmes."
3036
3037 msgid "The kernel has a database that associates each device ID with the required driver. This database is used during boot to load all the drivers for the peripheral devices detected on the different buses, but also when an additional hotplug device is connected. Once the device is ready for use, a message is sent to <command>udevd</command> so it will be able to create the corresponding entry in <filename>/dev/</filename>."
3038 msgstr "Le noyau dispose d'une base de données associant à chaque identifiant de périphérique le pilote requis. Cette base de données est employée au démarrage de l'ordinateur pour charger tous les pilotes des périphériques détectés sur les différents bus mentionnés, mais aussi lors de l'insertion à chaud d'un périphérique supplémentaire. Une fois le pilote chargé, un message est envoyé à <command>udevd</command> afin que celui-ci puisse créer l'entrée correspondante dans <filename>/dev/</filename>."
3039
3040 msgid "The Naming Problem"
3041 msgstr "La problématique du nommage"
3042
3043 msgid "Before the appearance of hotplug connections, it was easy to assign a fixed name to a device. It was based simply on the position of the devices on their respective bus. But this is not possible when such devices can come and go on the bus. The typical case is the use of a digital camera and a USB key, both of which appear to the computer as disk drives. The first one connected may be <filename>/dev/sdb</filename> and the second <filename>/dev/sdc</filename> (with <filename>/dev/sda</filename> representing the computer's own hard drive). The device name is not fixed; it depends on the order in which devices are connected."
3044 msgstr "Avant l'introduction des branchements à chaud, il était simple de donner un nom fixe à un périphérique. On se basait simplement sur le positionnement des périphériques dans leur bus respectif. Mais si les périphériques apparaissent et disparaissent sur le bus, ce n'est plus possible. L'exemple typique est l'emploi d'un appareil photo numérique et d'une clé USB : tous les deux apparaissent comme des disques, le premier branché pourra être <filename>/dev/sdb</filename> et le second <filename>/dev/sdc</filename> (avec <filename>/dev/sda</filename> représentant le disque dur). Le nom du périphérique n'est donc pas fixe, il dépend de l'ordre dans lequel ils ont été connectés."
3045
3046 msgid "Additionally, more and more drivers use dynamic values for devices' major/minor numbers, which makes it impossible to have static entries for the given devices, since these essential characteristics may vary after a reboot."
3047 msgstr "En outre, de plus en plus de pilotes emploient des numéros majeur/mineur dynamiques, ce qui fait qu'il est impossible d'avoir une entrée statique pour le périphérique, puisque ces caractéristiques essentielles peuvent varier après un redémarrage de l'ordinateur."
3048
3049 #, fuzzy
3050 #| msgid "<primary>inode</primary>"
3051 msgid "<primary>udev</primary>"
3052 msgstr "<primary><foreignphrase>inode</foreignphrase></primary>"
3053
3054 msgid "<emphasis>udev</emphasis> was created precisely to solve this problem."
3055 msgstr "C'est pour résoudre ces problématiques qu'<emphasis>udev</emphasis> a été créé."
3056
3057 msgid "How <emphasis>udev</emphasis> Works"
3058 msgstr "Fonctionnement de udev"
3059
3060 #, fuzzy
3061 #| msgid "<primary><filename>crontab</filename></primary>"
3062 msgid "<primary><filename>/sys</filename></primary>"
3063 msgstr "<primary><filename>crontab</filename></primary>"
3064
3065 #, fuzzy
3066 #| msgid "<primary>client</primary><secondary>client/server architecture</secondary>"
3067 msgid "<primary><filename>/etc</filename></primary><secondary><filename>/etc/udev/rules.d/</filename></secondary>"
3068 msgstr "<primary>client</primary><secondary>architecture client/serveur</secondary>"
3069
3070 #, fuzzy
3071 #| msgid "<primary>modules</primary><secondary>kernel modules</secondary>"
3072 msgid "<primary><filename>/lib</filename></primary><secondary><filename>/lib/udev/rules.d/</filename></secondary>"
3073 msgstr "<primary>modules</primary><secondary>du noyau</secondary>"
3074
3075 msgid "When <emphasis>udev</emphasis> is notified by the kernel of the appearance of a new device, it collects various information on the given device by consulting the corresponding entries in <filename>/sys/</filename>, especially those that uniquely identify it (MAC address for a network card, serial number for some USB devices, etc.)."
3076 msgstr "Lorsqu'<emphasis>udev</emphasis> est informé par le noyau de l'apparition d'un nouveau périphérique, il récupère de nombreuses informations sur le périphérique en question en consultant les entrées correspondantes dans <filename>/sys/</filename>, en particulier celles qui permettent de l'identifier de manière unique (adresse MAC pour une carte réseau, numéro de série pour certains périphériques USB, etc.)."
3077
3078 #, fuzzy
3079 #| msgid "<primary>user</primary><secondary>owner</secondary>"
3080 msgid "<primary>udev</primary><secondary>rules</secondary>"
3081 msgstr "<primary>utilisateur</primary><secondary>propriétaire</secondary>"
3082
3083 msgid "Armed with all of this information, <emphasis>udev</emphasis> then consults all of the rules contained in <filename>/etc/udev/rules.d/</filename> and <filename>/lib/udev/rules.d/</filename>. In this process it decides how to name the device, what symbolic links to create (to give it alternative names), and what commands to execute. All of these files are consulted, and the rules are all evaluated sequentially (except when a file uses “GOTO” directives). Thus, there may be several rules that correspond to a given event."
3084 msgstr "Armé de toutes ces informations, <emphasis>udev</emphasis> consulte l'ensemble de règles contenu dans <filename>/etc/udev/rules.d/</filename> et <filename>/lib/udev/rules.d/</filename> et décide à partir de cela du nom à attribuer au périphérique, des liens symboliques à créer (pour offrir des noms alternatifs), ainsi que des commandes à exécuter. Tous les fichiers sont consultés et les règles sont toutes évaluées séquentiellement (sauf quand un fichier fait appel à des constructions de type « GOTO »). Ainsi, il peut y avoir plusieurs règles qui correspondent à un événement donné."
3085
3086 msgid "The syntax of rules files is quite simple: each row contains selection criteria and variable assignments. The former are used to select events for which there is a need to react, and the latter defines the action to take. They are all simply separated with commas, and the operator implicitly differentiates between a selection criterion (with comparison operators, such as <literal>==</literal> or <literal>!=</literal>) or an assignment directive (with operators such as <literal>=</literal>, <literal>+=</literal> or <literal>:=</literal>)."
3087 msgstr "La syntaxe des fichiers de règles est assez simple : chaque ligne contient des critères de sélection et des directives d'affectation. Les premiers permettent de sélectionner les événements sur lesquels il faudra réagir et les seconds définissent l'action à effectuer. Tous sont simplement séparés par des virgules et c'est l'opérateur qui désigne s'il s'agit d'un critère de sélection (pour les opérateurs de comparaison <literal>==</literal> ou <literal>!=</literal>) ou d'une directive d'affectation (pour les opérateurs <literal>=</literal>, <literal>+=</literal> ou <literal>:=</literal>)."
3088
3089 msgid "Comparison operators are used on the following variables:"
3090 msgstr "Les opérateurs de comparaison s'emploient sur les variables suivantes :"
3091
3092 msgid "<literal>KERNEL</literal>: the name that the kernel assigns to the device;"
3093 msgstr "<literal>KERNEL</literal> : le nom que le noyau affecte au périphérique ;"
3094
3095 msgid "<literal>ACTION</literal>: the action corresponding to the event (“add” when a device has been added, “remove” when it has been removed);"
3096 msgstr "<literal>ACTION</literal> : l'action correspondant à l'événement (« add » pour l'ajout d'un périphérique, « remove » pour la suppression) ;"
3097
3098 msgid "<literal>DEVPATH</literal>: the path of the device's <filename>/sys/</filename> entry;"
3099 msgstr "<literal>DEVPATH</literal> : le chemin de l'entrée correspondant au périphérique dans <filename>/sys/</filename> ;"
3100
3101 msgid "<literal>SUBSYSTEM</literal>: the kernel subsystem which generated the request (there are many, but a few examples are “usb”, “ide”, “net”, “firmware”, etc.);"
3102 msgstr "<literal>SUBSYSTEM</literal> : le sous-système du noyau à l'origine de la demande (ils sont nombreux mais citons par exemple « usb », « ide », « net », « firmware », etc.) ;"
3103
3104 msgid "<literal>ATTR{<replaceable>attribute</replaceable>}</literal>: file contents of the <replaceable>attribute</replaceable> file in the <filename>/sys/<replaceable>$devpath</replaceable>/</filename> directory of the device. This is where you find the MAC address and other bus specific identifiers;"
3105 msgstr "<literal>ATTR{<replaceable>attribut</replaceable>}</literal> : contenu du fichier <replaceable>attribut</replaceable> dans le répertoire <filename>/sys/<replaceable>$devpath</replaceable>/</filename> du périphérique. C'est ici que l'on va trouver les adresses MAC et autres identifiants spécifiques à chaque bus ;"
3106
3107 msgid "<literal>KERNELS</literal>, <literal>SUBSYSTEMS</literal> and <literal>ATTRS{<replaceable>attributes</replaceable>}</literal> are variations that will try to match the different options on one of the parent devices of the current device;"
3108 msgstr "<literal>KERNELS</literal>, <literal>SUBSYSTEMS</literal> et <literal>ATTRS{<replaceable>attribut</replaceable>}</literal> sont des variantes qui vont chercher à faire correspondre les différentes options sur un des périphériques parents du périphérique actuel ;"
3109
3110 msgid "<literal>PROGRAM</literal>: delegates the test to the indicated program (true if it returns 0, false if not). The content of the program's standard output is stored so that it can be reused by the <literal>RESULT</literal> test;"
3111 msgstr "<literal>PROGRAM</literal> : délègue le test au programme indiqué (vrai s'il renvoie 0, faux sinon). Le contenu de la sortie standard du programme est stocké afin de pouvoir l'utiliser dans le cadre du test <literal>RESULT</literal> ;"
3112
3113 msgid "<literal>RESULT</literal>: execute tests on the standard output stored during the last call to <literal>PROGRAM</literal>."
3114 msgstr "<literal>RESULT</literal> : effectue des tests sur la sortie standard du dernier appel à <literal>PROGRAM</literal>."
3115
3116 msgid "The right operands can use pattern expressions to match several values at the same time. For instance, <literal>*</literal> matches any string (even an empty one); <literal>?</literal> matches any character, and <literal>[]</literal> matches the set of characters listed between the square brackets (or the opposite thereof if the first character is an exclamation point, and contiguous ranges of characters are indicated like <literal>a-z</literal>)."
3117 msgstr "Les opérandes de droite peuvent employer certaines expressions de motifs pour correspondre à plusieurs valeurs en même temps. Ainsi, <literal>*</literal> correspond à une chaîne quelconque (même vide), <literal>?</literal> correspond à un caractère quelconque et <literal>[]</literal> correspond à l'ensemble de caractères cités entre les crochets (l'ensemble inverse si le premier caractère est un point d'exclamation, et les intervalles de caractères sont possibles grâce à la notation <literal>a-z</literal>)."
3118
3119 msgid "Regarding the assignment operators, <literal>=</literal> assigns a value (and replaces the current value); in the case of a list, it is emptied and contains only the value assigned. <literal>:=</literal> does the same, but prevents later changes to the same variable. As for <literal>+=</literal>, it adds an item to a list. The following variables can be changed:"
3120 msgstr "En ce qui concerne les opérateurs d'affectation, <literal>=</literal> affecte une valeur (et remplace la valeur actuelle) ; s'il s'agit d'une liste elle est vidée et ne contient plus que la valeur affectée. <literal>:=</literal> fait de même mais empêche les modifications subséquentes de cette même variable. Quant à <literal>+=</literal>, il ajoute une valeur dans une liste. Voici les variables qui peuvent être modifiées :"
3121
3122 msgid "<literal>NAME</literal>: the device filename to be created in <filename>/dev/</filename>. Only the first assignment counts; the others are ignored;"
3123 msgstr "<literal>NAME</literal> : le nom du fichier de périphérique à créer dans <filename>/dev/</filename>. Seule la première affectation compte, les autres sont ignorées ;"
3124
3125 msgid "<literal>SYMLINK</literal>: the list of symbolic links that will point to the same device;"
3126 msgstr "<literal>SYMLINK</literal> : la liste des noms symboliques qui pointeront sur le même périphérique ;"
3127
3128 msgid "<literal>OWNER</literal>, <literal>GROUP</literal> and <literal>MODE</literal> define the user and group that owns the device, as well as the associated permission;"
3129 msgstr "<literal>OWNER</literal>, <literal>GROUP</literal> et <literal>MODE</literal> définissent l'utilisateur et le groupe propriétaire du périphérique ainsi que les permissions associées ;"
3130
3131 msgid "<literal>RUN</literal>: the list of programs to execute in response to this event."
3132 msgstr "<literal>RUN</literal> : la liste des programmes à exécuter en réponse à cet événement."
3133
3134 msgid "The values assigned to these variables may use a number of substitutions:"
3135 msgstr "Les valeurs affectées à ces variables peuvent employer un certain nombre de substitutions :"
3136
3137 msgid "<literal>$kernel</literal> or <literal>%k</literal>: equivalent to <literal>KERNEL</literal>;"
3138 msgstr "<literal>$kernel</literal> ou <literal>%k</literal> : équivalent de <literal>KERNEL</literal> ;"
3139
3140 msgid "<literal>$number</literal> or <literal>%n</literal>: the order number of the device, for example, for <literal>sda3</literal>, it would be “3”;"
3141 msgstr "<literal>$number</literal> ou <literal>%n</literal> : le numéro d'ordre du périphérique, par exemple « 3 » pour <literal>sda3</literal> ;"
3142
3143 msgid "<literal>$devpath</literal> or <literal>%p</literal>: equivalent to <literal>DEVPATH</literal>;"
3144 msgstr "<literal>$devpath</literal> ou <literal>%p</literal> : équivalent de <literal>DEVPATH</literal> ;"
3145
3146 msgid "<literal>$attr{<replaceable>attribute</replaceable>}</literal> or <literal>%s{<replaceable>attribute</replaceable>}</literal>: equivalent to <literal>ATTRS{<replaceable>attribute</replaceable>}</literal>;"
3147 msgstr "<literal>$attr{<replaceable>attribut</replaceable>}</literal> ou <literal>%s{<replaceable>attribut</replaceable>}</literal> : équivalent de <literal>ATTRS{<replaceable>attribut</replaceable>}</literal> ;"
3148
3149 msgid "<literal>$major</literal> or <literal>%M</literal>: the kernel major number of the device;"
3150 msgstr "<literal>$major</literal> ou <literal>%M</literal> : le numéro majeur du périphérique ;"
3151
3152 msgid "<literal>$minor</literal> or <literal>%m</literal>: the kernel minor number of the device;"
3153 msgstr "<literal>$minor</literal> ou <literal>%m</literal> : le numéro mineur du périphérique ;"
3154
3155 msgid "<literal>$result</literal> or <literal>%c</literal>: the string output by the last program invoked by <literal>PROGRAM</literal>;"
3156 msgstr "<literal>$result</literal> ou <literal>%c</literal> : la chaîne renvoyée par le dernier programme invoqué par <literal>PROGRAM</literal> ;"
3157
3158 msgid "and, finally, <literal>%%</literal> and <literal>$$</literal> for the percent and dollar sign, respectively."
3159 msgstr "enfin <literal>%%</literal> et <literal>$$</literal> pour les caractères pourcent et dollar respectivement."
3160
3161 #, fuzzy
3162 #| msgid "The above lists are not complete (they include only the most important parameters), but the <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry> manual page should be exhaustive."
3163 msgid "The above lists are not complete (they include only the most important parameters), but the <citerefentry><refentrytitle>udev</refentrytitle> <manvolnum>7</manvolnum></citerefentry> manual page should be exhaustive."
3164 msgstr "Ces listes ne sont pas exhaustives (elles reprennent les paramètres les plus importants) mais la page de manuel <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry> devrait l'être."
3165
3166 msgid "A concrete example"
3167 msgstr "Cas pratique"
3168
3169 msgid "Let us consider the case of a simple USB key and try to assign it a fixed name. First, you must find the elements that will identify it in a unique manner. For this, plug it in and run <command>udevadm info -a -n /dev/sdc</command> (replacing <replaceable>/dev/sdc</replaceable> with the actual name assigned to the key)."
3170 msgstr "Prenons le cas d'une simple clé USB et essayons de lui affecter un nom fixe. Il faut d'abord trouver les éléments qui vont permettre de l'identifier de manière unique. Pour cela, on la branche et on exécute <command>udevadm info -a -n /dev/sdc</command> (en remplaçant évidemment <replaceable>/dev/sdc</replaceable> par le nom réel affecté à la clé)."
3171
3172 #, fuzzy
3173 #| msgid ""
3174 #| "<computeroutput># </computeroutput><userinput>udevadm info -a -n /dev/sdc</userinput>\n"
3175 #| "<computeroutput>[...]\n"
3176 #| " looking at device '/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.2/1-2.2:1.0/host9/target9:0:0/9:0:0:0/block/sdc':\n"
3177 #| " KERNEL==\"sdc\"\n"
3178 #| " SUBSYSTEM==\"block\"\n"
3179 #| " DRIVER==\"\"\n"
3180 #| " ATTR{range}==\"16\"\n"
3181 #| " ATTR{ext_range}==\"256\"\n"
3182 #| " ATTR{removable}==\"1\"\n"
3183 #| " ATTR{ro}==\"0\"\n"
3184 #| " ATTR{size}==\"126976\"\n"
3185 #| " ATTR{alignment_offset}==\"0\"\n"
3186 #| " ATTR{capability}==\"53\"\n"
3187 #| " ATTR{stat}==\" 51 100 1208 256 0 0 0 0 0 192 25 6\"\n"
3188 #| " ATTR{inflight}==\" 0 0\"\n"
3189 #| "[...]\n"
3190 #| " looking at parent device '/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.2/1-2.2:1.0/host9/target9:0:0/9:0:0:0':\n"
3191 #| " KERNELS==\"9:0:0:0\"\n"
3192 #| " SUBSYSTEMS==\"scsi\"\n"
3193 #| " DRIVERS==\"sd\"\n"
3194 #| " ATTRS{device_blocked}==\"0\"\n"
3195 #| " ATTRS{type}==\"0\"\n"
3196 #| " ATTRS{scsi_level}==\"3\"\n"
3197 #| " ATTRS{vendor}==\"I0MEGA \"\n"
3198 #| " ATTRS{model}==\"UMni64MB*IOM2C4 \"\n"
3199 #| " ATTRS{rev}==\" \"\n"
3200 #| " ATTRS{state}==\"running\"\n"
3201 #| "[...]\n"
3202 #| " ATTRS{max_sectors}==\"240\"\n"
3203 #| "[...]\n"
3204 #| " looking at parent device '/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.2':\n"
3205 #| " KERNELS==\"9:0:0:0\"\n"
3206 #| " SUBSYSTEMS==\"usb\"\n"
3207 #| " DRIVERS==\"usb\"\n"
3208 #| " ATTRS{configuration}==\"iCfg\"\n"
3209 #| " ATTRS{bNumInterfaces}==\" 1\"\n"
3210 #| " ATTRS{bConfigurationValue}==\"1\"\n"
3211 #| " ATTRS{bmAttributes}==\"80\"\n"
3212 #| " ATTRS{bMaxPower}==\"100mA\"\n"
3213 #| " ATTRS{urbnum}==\"398\"\n"
3214 #| " ATTRS{idVendor}==\"4146\"\n"
3215 #| " ATTRS{idProduct}==\"4146\"\n"
3216 #| " ATTRS{bcdDevice}==\"0100\"\n"
3217 #| "[...]\n"
3218 #| " ATTRS{manufacturer}==\"USB Disk\"\n"
3219 #| " ATTRS{product}==\"USB Mass Storage Device\"\n"
3220 #| " ATTRS{serial}==\"M004021000001\"\n"
3221 #| "[...]\n"
3222 #| "</computeroutput>"
3223 msgid ""
3224 "<computeroutput># </computeroutput><userinput>udevadm info -a -n /dev/sdc</userinput>\n"
3225 "<computeroutput>[...]\n"
3226 " looking at device '/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/host4/target4:0:0/4:0:0:0/block/sdc':\n"
3227 " KERNEL==\"sdc\"\n"
3228 " SUBSYSTEM==\"block\"\n"
3229 " DRIVER==\"\"\n"
3230 " ATTR{hidden}==\"0\"\n"
3231 " ATTR{events}==\"media_change\"\n"
3232 " ATTR{ro}==\"0\"\n"
3233 " ATTR{discard_alignment}==\"0\"\n"
3234 " ATTR{removable}==\"1\"\n"
3235 " ATTR{events_async}==\"\"\n"
3236 " ATTR{alignment_offset}==\"0\"\n"
3237 " ATTR{capability}==\"51\"\n"
3238 " ATTR{events_poll_msecs}==\"-1\"\n"
3239 " ATTR{stat}==\"130 0 6328 435 0 0 0 0 0 252 252 0 0 0 0\"\n"
3240 " ATTR{size}==\"15100224\"\n"
3241 " ATTR{range}==\"16\"\n"
3242 " ATTR{ext_range}==\"256\"\n"
3243 " ATTR{inflight}==\"0 0\"\n"
3244 "[...]\n"
3245 "\n"
3246 " looking at parent device '/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/host4/target4:0:0/4:0:0:0':\n"
3247 "[...]\n"
3248 " ATTRS{max_sectors}==\"240\"\n"
3249 "[...]\n"
3250 " looking at parent device '/devices/pci0000:00/0000:00:10.0/usb2/2-1':\n"
3251 " KERNELS==\"2-1\"\n"
3252 " SUBSYSTEMS==\"usb\"\n"
3253 " DRIVERS==\"usb\"\n"
3254 " ATTRS{bDeviceProtocol}==\"00\"\n"
3255 " ATTRS{bNumInterfaces}==\" 1\"\n"
3256 " ATTRS{busnum}==\"2\"\n"
3257 " ATTRS{quirks}==\"0x0\"\n"
3258 " ATTRS{authorized}==\"1\"\n"
3259 " ATTRS{ltm_capable}==\"no\"\n"
3260 " ATTRS{speed}==\"480\"\n"
3261 " ATTRS{product}==\"TF10\"\n"
3262 " ATTRS{manufacturer}==\"TDK LoR\"\n"
3263 "[...]\n"
3264 " ATTRS{serial}==\"07032998B60AB777\"\n"
3265 "[...]\n"
3266 "</computeroutput>"
3267 msgstr ""
3268 "<computeroutput># </computeroutput><userinput>udevadm info -a -n /dev/sdc</userinput>\n"
3269 "<computeroutput>[...]\n"
3270 " looking at device '/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.2/1-2.2:1.0/host9/target9:0:0/9:0:0:0/block/sdc':\n"
3271 " KERNEL==\"sdc\"\n"
3272 " SUBSYSTEM==\"block\"\n"
3273 " DRIVER==\"\"\n"
3274 " ATTR{range}==\"16\"\n"
3275 " ATTR{ext_range}==\"256\"\n"
3276 " ATTR{removable}==\"1\"\n"
3277 " ATTR{ro}==\"0\"\n"
3278 " ATTR{size}==\"126976\"\n"
3279 " ATTR{alignment_offset}==\"0\"\n"
3280 " ATTR{capability}==\"53\"\n"
3281 " ATTR{stat}==\" 51 100 1208 256 0 0 0 0 0 192 25 6\"\n"
3282 " ATTR{inflight}==\" 0 0\"\n"
3283 "[...]\n"
3284 " looking at parent device '/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.2/1-2.2:1.0/host9/target9:0:0/9:0:0:0':\n"
3285 " KERNELS==\"9:0:0:0\"\n"
3286 " SUBSYSTEMS==\"scsi\"\n"
3287 " DRIVERS==\"sd\"\n"
3288 " ATTRS{device_blocked}==\"0\"\n"
3289 " ATTRS{type}==\"0\"\n"
3290 " ATTRS{scsi_level}==\"3\"\n"
3291 " ATTRS{vendor}==\"I0MEGA \"\n"
3292 " ATTRS{model}==\"UMni64MB*IOM2C4 \"\n"
3293 " ATTRS{rev}==\" \"\n"
3294 " ATTRS{state}==\"running\"\n"
3295 "[...]\n"
3296 " ATTRS{max_sectors}==\"240\"\n"
3297 "[...]\n"
3298 " looking at parent device '/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.2':\n"
3299 " KERNELS==\"1-2.2\"\n"
3300 " SUBSYSTEMS==\"usb\"\n"
3301 " DRIVERS==\"usb\"\n"
3302 " ATTRS{configuration}==\"iCfg\"\n"
3303 " ATTRS{bNumInterfaces}==\" 1\"\n"
3304 " ATTRS{bConfigurationValue}==\"1\"\n"
3305 " ATTRS{bmAttributes}==\"80\"\n"
3306 " ATTRS{bMaxPower}==\"100mA\"\n"
3307 " ATTRS{urbnum}==\"398\"\n"
3308 " ATTRS{idVendor}==\"4146\"\n"
3309 " ATTRS{idProduct}==\"4146\"\n"
3310 " ATTRS{bcdDevice}==\"0100\"\n"
3311 "[...]\n"
3312 " ATTRS{manufacturer}==\"USB Disk\"\n"
3313 " ATTRS{product}==\"USB Mass Storage Device\"\n"
3314 " ATTRS{serial}==\"M004021000001\"\n"
3315 "[...]\n"
3316 "</computeroutput>"
3317
3318 msgid "To create a new rule, you can use tests on the device's variables, as well as those of one of the parent devices. The above case allows us to create two rules like these:"
3319 msgstr "Pour constituer une ligne de règle, on peut employer des tests sur les variables du périphérique ainsi que celles d'un seul des périphériques parents. L'exemple ci-dessus permet notamment de créer deux règles comme celles-ci :"
3320
3321 #, fuzzy
3322 #| msgid ""
3323 #| "KERNEL==\"sd?\", SUBSYSTEM==\"block\", ATTRS{serial}==\"M004021000001\", SYMLINK+=\"usb_key/disk\"\n"
3324 #| "KERNEL==\"sd?[0-9]\", SUBSYSTEM==\"block\", ATTRS{serial}==\"M004021000001\", SYMLINK+=\"usb_key/part%n\""
3325 msgid ""
3326 "KERNEL==\"sd?\", SUBSYSTEM==\"block\", ATTRS{serial}==\"07032998B60AB777\", SYMLINK+=\"usb_key/disk\"\n"
3327 "KERNEL==\"sd?[0-9]\", SUBSYSTEM==\"block\", ATTRS{serial}==\"07032998B60AB777\", SYMLINK+=\"usb_key/part%n\""
3328 msgstr ""
3329 "KERNEL==\"sd?\", SUBSYSTEM==\"block\", ATTRS{serial}==\"M004021000001\", SYMLINK+=\"clef_usb/disk\"\n"
3330 "KERNEL==\"sd?[0-9]\", SUBSYSTEM==\"block\", ATTRS{serial}==\"M004021000001\", SYMLINK+=\"clef_usb/part%n\""
3331
3332 msgid "Once these rules are set in a file, named for example <filename>/etc/udev/rules.d/010_local.rules</filename>, you can simply remove and reconnect the USB key. You can then see that <filename>/dev/usb_key/disk</filename> represents the disk associated with the USB key, and <filename>/dev/usb_key/part1</filename> is its first partition."
3333 msgstr "Une fois ces règles placées dans un fichier, nommé par exemple <filename>/etc/udev/rules.d/010_local.rules</filename>, il suffit de retirer puis réinsérer la clé USB. On peut alors constater que <filename>/dev/clef_usb/disk</filename> représente le disque associé à la clé USB et que <filename>/dev/clef_usb/part1</filename> est sa première partition."
3334
3335 msgid "<emphasis>GOING FURTHER</emphasis> Debugging <emphasis>udev</emphasis>'s configuration"
3336 msgstr "<emphasis>POUR ALLER PLUS LOIN</emphasis> Déboguer la configuration de <emphasis>udev</emphasis>"
3337
3338 #, fuzzy
3339 #| msgid "<primary>login</primary><secondary>remote login</secondary>"
3340 msgid "<primary><command>udevd</command></primary><secondary><filename>/var/log/daemon.log</filename></secondary>"
3341 msgstr "<primary>connexion</primary><secondary>à distance</secondary>"
3342
3343 #, fuzzy
3344 #| msgid "<primary><command>kdm</command></primary>"
3345 msgid "<primary><command>udevadm</command></primary>"
3346 msgstr "<primary><command>kdm</command></primary>"
3347
3348 msgid "Like many daemons, <command>udevd</command> stores logs in <filename>/var/log/daemon.log</filename>. But it is not very verbose by default, and it is usually not enough to understand what is happening. The <command>udevadm control --log-priority=info</command> command increases the verbosity level and solves this problem. <command>udevadm control --log-priority=err</command> returns to the default verbosity level."
3349 msgstr "Comme beaucoup de démons, <command>udevd</command> enregistre des traces dans <filename>/var/log/daemon.log</filename>. Mais il n'est pas très verbeux par défaut et cela ne permet que rarement de comprendre ce qu'il fait. La commande <command>sudo udevadm control --log-priority=info</command> augmente le niveau de verbosité courant et résout ce problème. <command>udevadm control --log-priority=err</command> remet en place le niveau par défaut."
3350
3351 msgid "Power Management: Advanced Configuration and Power Interface (ACPI)"
3352 msgstr "Gestion de l'énergie : Advanced Configuration and Power Interface (ACPI)"
3353
3354 #, fuzzy
3355 #| msgid "<primary>SSH tunnel</primary><seealso>VPN</seealso>"
3356 msgid "<primary>power management</primary><seealso>ACPI</seealso>"
3357 msgstr "<primary>tunnel SSH</primary><seealso>VPN</seealso>"
3358
3359 #, fuzzy
3360 #| msgid "<primary>management, power management</primary>"
3361 msgid "<primary>management, power management</primary><seealso>ACPI</seealso>"
3362 msgstr "<primary>énergie, gestion</primary>"
3363
3364 msgid "<primary>ACPI</primary>"
3365 msgstr "<primary>ACPI</primary>"
3366
3367 #, fuzzy
3368 #| msgid "<primary>Advanced Configuration and Power Interface</primary>"
3369 msgid "<primary>Advanced Configuration and Power Interface</primary><seealso>ACPI</seealso>"
3370 msgstr "<primary><foreignphrase>Advanced Configuration and Power Interface</foreignphrase></primary>"
3371
3372 msgid "<primary><command>acpid</command></primary>"
3373 msgstr "<primary><command>acpid</command></primary>"
3374
3375 msgid "The topic of power management is often problematic. Indeed, properly suspending the computer requires that all the computer's device drivers know how to put them to standby, and that they properly reconfigure the devices upon waking. Unfortunately, there are still a few devices unable to sleep well under Linux, because their manufacturers have not provided the required specifications."
3376 msgstr "La question de la gestion de l'énergie reste souvent problématique. En effet, une mise en veille réussie requiert que les pilotes de tous les périphériques de l'ordinateur sachent se désactiver et surtout reconfigurer le périphérique au réveil. Malheureusement, il subsiste quelques périphériques incapables de bien se mettre en veille sous Linux car leurs constructeurs n'en ont pas fourni les spécifications."
3377
3378 #, fuzzy
3379 #| msgid "Linux supports ACPI (Advanced Configuration and Power Interface) — the most recent standard in power management. The <emphasis role=\"pkg\">acpid</emphasis> package provides a daemon that looks for power management related events (switching between AC and battery power on a laptop, etc.) and that can execute various commands in response."
3380 msgid "Linux supports <acronym>ACPI</acronym> (Advanced Configuration and Power Interface) — the most recent standard in power management. The <emphasis role=\"pkg\">acpid</emphasis> package provides a daemon that looks for power management related events (switching between AC and battery power on a laptop, etc.) and that can execute various commands in response."
3381 msgstr "Linux supporte le ACPI <foreignphrase>(Advanced Configuration and Power Interface)</foreignphrase>, le standard le plus récent en matière de gestion de l'énergie. Le paquet <emphasis role=\"pkg\">acpid</emphasis> fournit un démon qui se met à l'écoute d'événements liés à la gestion de l'énergie (par exemple, le basculement d'un portable depuis sa batterie vers l'alimentation secteur) et qui peut exécuter diverses commandes en réponse."
3382
3383 msgid "<emphasis>BEWARE</emphasis> Graphics card and standby"
3384 msgstr "<emphasis>ATTENTION</emphasis> Carte graphique et mise en veille"
3385
3386 msgid "The graphics card driver is often the culprit when standby doesn't work properly. In that case, it is a good idea to test the latest version of the X.org graphics server."
3387 msgstr "Le pilote de la carte graphique est souvent celui qui pose problème lors de la mise en veille. En cas de souci, il convient donc de tester la dernière version du serveur graphique X.org."
3388
3389 msgid "After this overview of basic services common to many Unix systems, we will focus on the environment of the administered machines: the network. Many services are required for the network to work properly. They will be discussed in the next chapter."
3390 msgstr "Après ce survol des services de base communs à de nombreux Unix, nous nous focaliserons sur l'environnement dans lequel évoluent les machines administrées : le réseau. De nombreux services sont en effet nécessaires à son bon fonctionnement — nous vous proposons de les découvrir dans le chapitre qui suit."
3391
3392 #~ msgid "<emphasis role=\"pkg\">file-rc</emphasis> is a boot system with a very simple process. It keeps the principle of runlevels, but replaces the directories and symbolic links with a configuration file, which indicates to <command>init</command> the processes that must be started and their launch order."
3393 #~ msgstr "Citons également le processus simplifié contenu dans le paquet <emphasis role=\"pkg\">file-rc</emphasis>. Ce dernier garde le principe des niveaux de fonctionnement <foreignphrase>(runlevels)</foreignphrase>, mais remplace les répertoires et les liens symboliques par un unique fichier de configuration, qui spécifie à <command>init</command> les processus à lancer et l'ordre de lancement."
3394
3395 #~ msgid "As you can see, there is very little code in there, only declarations. Systemd takes care of displaying progress reports, keeping track of the processes, and even restarting them when needed."
3396 #~ msgstr "On constate qu'il y a très peu de code dans ce fichier, juste des déclarations. <command>systemd</command> s'occupe d'afficher l'état d'avancement, garde une trace des processus, et les redémarre même lorsque c'est nécessaire."
3397
3398 #~ msgid "<primary>Secure Shell</primary>"
3399 #~ msgstr "<primary><foreignphrase>Secured Shell</foreignphrase></primary>"
3400
3401 #~ msgid "<primary>OpenSSH</primary>"
3402 #~ msgstr "<primary>OpenSSH</primary>"
3403
3404 #~ msgid "VNC also works for mobile users, or company executives, who occasionally need to login from their home to access a remote desktop similar to the one they use at work. The configuration of such a service is more complicated: you first install the <emphasis role=\"pkg\">vnc4server</emphasis> package, change the configuration of the display manager to accept <literal>XDMCP Query</literal> requests (for <command>gdm3</command>, this can be done by adding <literal>Enable=true</literal> in the “xdmcp” section of <filename>/etc/gdm3/daemon.conf</filename>), and finally, start the VNC server with <command>inetd</command> so that a session is automatically started when a user tries to login. For example, you may add this line to <filename>/etc/inetd.conf</filename>:"
3405 #~ msgstr "VNC sert aussi aux utilisateurs nomades, ou responsables d'entreprises, ayant des besoins ponctuels de connexion depuis chez eux, qui retrouvent ainsi à distance un bureau similaire à celui qu'ils ont au travail. La configuration d'un tel service est plus compliquée : il faut d'abord installer le paquet <emphasis role=\"pkg\">vnc4server</emphasis>, modifier la configuration du gestionnaire d'écran pour accepter les requêtes <literal>XDMCP Query</literal> (pour <command>gdm3</command>, cela peut se faire en ajoutant <literal>Enable=true</literal> dans la section « xdmcp » du fichier <filename>/etc/gdm3/daemon.conf</filename>) et enfin démarrer le serveur VNC via <command>inetd</command> pour qu'une session VNC soit démarrée dès qu'un utilisateur essaie de se connecter. On ajoutera par exemple cette ligne dans <filename>/etc/inetd.conf</filename> :"
3406
3407 #~ msgid "5950 stream tcp nowait nobody.tty /usr/bin/Xvnc Xvnc -inetd -query localhost -once -geometry 1024x768 -depth 16 securitytypes=none"
3408 #~ msgstr "5950 stream tcp nowait nobody.tty /usr/bin/Xvnc Xvnc -inetd -query localhost -once -geometry 1024x768 -depth 16 securitytypes=none"
3409
3410 #~ msgid "Redirecting incoming connections to the display manager solves the problem of authentication, because only users with local accounts will pass the <command>gdm3</command> login screen (or equivalent <command>kdm</command>, <command>xdm</command>, etc.). As this operation allows multiple simultaneous logins without any problem (provided the server is powerful enough), it can even be used to provide complete desktops for mobile users (or for less powerful desktop systems, configured as thin clients). Users simply login to the server's screen with <command>vncviewer <replaceable>server</replaceable>:50</command>, because the port used is 5950."
3411 #~ msgstr "Rediriger les connexions entrantes vers un gestionnaire d'écran résout le problème de l'authentification, puisque seuls les utilisateurs disposant de comptes locaux passeront le cap de la connexion via <command>gdm3</command> (ou les équivalents <command>kdm</command>, <command>xdm</command>, etc.). Comme ce fonctionnement permet sans problème plusieurs connexions simultanées (à condition que le serveur soit suffisamment puissant), il peut même être utilisé pour offrir des bureaux complets à différents utilisateurs itinérants (voire à des postes bureautiques peu puissants, configurés en clients légers). Les utilisateurs doivent simplement se connecter au 51<superscript>e</superscript> écran du serveur (<command>vncviewer <replaceable>serveur</replaceable>:50</command>) parce que le port employé est le 5950."
3412
3413 #~ msgid "<primary>rights</primary>"
3414 #~ msgstr "<primary>droits</primary>"
3415
3416 #~ msgid "<primary>umask</primary>"
3417 #~ msgstr "<primary><foreignphrase>umask</foreignphrase></primary>"
3418
3419 #~ msgid "<primary><command>debconf</command></primary>"
3420 #~ msgstr "<primary><command>debconf</command></primary>"
3421
3422 #~ msgid "<primary>pipe, named pipe</primary>"
3423 #~ msgstr "<primary>nommé, tube</primary>"
3424
3425 #~ msgid "The following example illustrates the most common cases:"
3426 #~ msgstr "L'exemple suivant illustre les cas les plus courants:"
3427
3428 #~ msgid ""
3429 #~ "talk dgram udp wait nobody.tty /usr/sbin/in.talkd in.talkd\n"
3430 #~ "finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd\n"
3431 #~ "ident stream tcp nowait nobody /usr/sbin/identd identd -i"
3432 #~ msgstr ""
3433 #~ "talk dgram udp wait nobody.tty /usr/sbin/in.talkd in.talkd\n"
3434 #~ "finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd\n"
3435 #~ "ident stream tcp nowait nobody /usr/sbin/identd identd -i"
3436
3437 #~ msgid "<primary><command>warnquota</command></primary>"
3438 #~ msgstr "<primary><command>warnquota</command></primary>"
3439
3440 #~ msgid "<primary><emphasis>hotplug</emphasis></primary>"
3441 #~ msgstr "<primary><emphasis>hotplug</emphasis></primary>"
3442
3443 #~ msgid "<primary>power management</primary>"
3444 #~ msgstr "<primary>gestion de l'énergie</primary>"
3445
3446 #~ msgid "<emphasis>IN PRACTICE</emphasis> Network card management"
3447 #~ msgstr "<emphasis>EN PRATIQUE</emphasis> Gestion des cartes réseau"
3448
3449 #~ msgid "Many computers have multiple network cards (sometimes two wired interfaces and a wifi interface), and with <emphasis>hotplug</emphasis> support on most bus types, the Linux kernel does not guarantee fixed naming of network interfaces. But users who want to configure their network in <filename>/etc/network/interfaces</filename> need a fixed name!"
3450 #~ msgstr "De nombreux ordinateurs intègrent plusieurs cartes réseau (parfois deux interfaces filaires et une interface Wi-Fi) et avec la prise en charge de <emphasis>hotplug</emphasis> sur la plupart des types de bus, le noyau Linux n'offre pas de garantie de nommage fixe sur ces interfaces réseau. Pourtant l'utilisateur qui veut configurer son réseau dans <filename>/etc/network/interfaces</filename> a besoin d'un nom fixe !"
3451
3452 #~ msgid "It would be difficult to ask every user to create their own <emphasis>udev</emphasis> rules to address this problem. This is why <emphasis>udev</emphasis> was configured in a rather peculiar manner; on first boot (and, more generally, each time that a new network card appears) it uses the name of the network interface and its MAC address to create new rules that will reassign the same name on subsequent boots. These rules are stored in <filename>/etc/udev/rules.d/70-persistent-net.rules</filename>."
3453 #~ msgstr "Il serait pénible de demander à chaque utilisateur de se créer ses propres règles <emphasis>udev</emphasis> pour régler ce problème, c'est pourquoi <emphasis>udev</emphasis> a été configuré d'une manière un peu particulière : au premier démarrage (et plus généralement à chaque fois qu'une carte jamais rencontrée apparaît), il utilise le nom de l'interface réseau et son adresse MAC pour créer des nouvelles règles qui, aux prochains redémarrages, seront employées pour réattribuer systématiquement les mêmes noms. Ces règles sont stockées dans <filename>/etc/udev/rules.d/70-persistent-net.rules</filename>."
3454
3455 #~ msgid "This mechanism has some side effects that you should know about. Let's consider the case of a computer that has only one PCI network card. The network interface is named <literal>eth0</literal>, logically. Now say the card breaks down, and the administrator replaces it; the new card will have a new MAC address. Since the old card was assigned the name, <literal>eth0</literal>, the new one will be assigned <literal>eth1</literal>, even though the <literal>eth0</literal> card is gone for good (and the network will not be functional because <filename>/etc/network/interfaces</filename> likely configures an <literal>eth0</literal> interface). In this case, it is enough to simply delete the <filename>/etc/udev/rules.d/70-persistent-net.rules</filename> file before rebooting the computer. The new card will then be given the expected <literal>eth0</literal> name."
3456 #~ msgstr "Ce mécanisme a des effets de bord qu'il est bon de connaître. Considérons le cas d'un ordinateur qui n'a qu'une seule carte réseau PCI. L'interface réseau se nomme logiquement <literal>eth0</literal>. La carte tombe en panne et l'administrateur la remplace, la nouvelle carte a donc une nouvelle adresse MAC. Puisque l'ancienne carte avait reçu le nom <literal>eth0</literal>, la nouvelle se verra attribuer le nom <literal>eth1</literal> alors même que la carte <literal>eth0</literal> ne réapparaîtra jamais (et le réseau ne sera pas fonctionnel car <filename>/etc/network/interfaces</filename> configure vraisemblablement une interface <literal>eth0</literal>). Dans ces cas, il suffit de supprimer le fichier <filename>/etc/udev/rules.d/70-persistent-net.rules</filename> avant de redémarrer l'ordinateur et la nouvelle carte recevra le nom <literal>eth0</literal> attendu."
3457
3458 #~ msgid "<emphasis>CULTURE</emphasis> Advanced Power Management (APM)"
3459 #~ msgstr "<emphasis>CULTURE</emphasis> Advanced Power Management (APM)"
3460
3461 #~ msgid "<primary>Advanced Power Management</primary>"
3462 #~ msgstr "<primary><foreignphrase>Advanced Power Management</foreignphrase></primary>"
3463
3464 #~ msgid "APM (Advanced Power Management) is the ancestor of ACPI in the power management world. While Debian still provides <command>apmd</command> (the counterpart to <command>acpid</command> for the APM standard), the official Debian kernel no longer supports APM so you'll have to run a custom kernel if you really need it for some old computer."
3465 #~ msgstr "L'ancêtre d'ACPI est APM (<foreignphrase>Advanced Power Management</foreignphrase>). Debian continue de fournir <command>apmd</command> (l'équivalent de <command>acpid</command> dans le monde APM) mais le noyau Debian officiel ne gère plus APM ; il vous faudra donc utiliser un noyau personnalisé si vous avez réellement besoin d'APM (par exemple pour un vieil ordinateur)."
3466
3467 #~ msgid "Another new option that is gaining a lot of traction is <command>systemd</command>. Its approach is opposite to the previous systems; instead of preemptively launching all services, and having to deal with the question of scheduling, <command>systemd</command> chooses to start services on demand, somewhat along the principle of <command>inetd</command>. But this means that the boot system must be able to know how services are made available (it could be through a socket, a filesystem, or others), and thus requires small modifications of those services. It also provides backwards compatibility to System V init scripts."
3468 #~ msgstr "Un autre nouveau venu est <command>systemd</command>, dont on parle beaucoup. Son approche est à l'opposé des systèmes précédents : au lieu de lancer systématiquement tous les services et d'avoir à traiter du problème de leur ordonnancement, <command>systemd</command> fait le choix de les démarrer à la demande, un peu selon le principe d'<command>inetd</command>. Mais cela implique que le système de démarrage soit mis au courant de la manière dont les services sont rendus disponibles (qu'il s'agisse de serveurs qui écoutent sur le réseau, de systèmes de fichiers ou autres) et nécessite donc une modification partielle desdits services. <command>systemd</command> fournit aussi une couche de compatibilité pour les scripts d'initialisation System V existants."