| 1 |
################################################################################ |
| 2 |
# This test validates UDF group_replication_set_as_primary and confirms |
| 3 |
# that connection running a transactions that did not reach commit stage is |
| 4 |
# disconnected when UDF group_replication_set_as_primary is executed. |
| 5 |
# UDF group_replication_set_as_primary runs successfully and primary is changed. |
| 6 |
# |
| 7 |
# Test: |
| 8 |
# 0. The test requires two servers: M1 and M2. |
| 9 |
# 1. Setup group of 2 servers, M1(primary) and M2(secondary). |
| 10 |
# 2. Block all commits on server1 and initiate a transaction. |
| 11 |
# Begin change of primary from server2(secondary). |
| 12 |
# 3. Unblock transactions on server1. |
| 13 |
# Transaction should fail it was not committing so it was killed |
| 14 |
# and client connection dropped. |
| 15 |
# 4. Assert primary changed. |
| 16 |
# Assert data is not present on M1 and M2. |
| 17 |
# 5. Block all commits on server2 and initiate a transaction. |
| 18 |
# Begin change of primary from server2(primary). |
| 19 |
# 6. Unblock transactions on server2. |
| 20 |
# Transaction should fail it was not committing so it was killed |
| 21 |
# and client connection dropped. |
| 22 |
# 7. Assert primary changed. |
| 23 |
# Assert data is not present on M1 and M2. |
| 24 |
# 8. Cleanup. |
| 25 |
################################################################################ |
| 26 |
|
| 27 |
--source include/have_debug_sync.inc |
| 28 |
--source include/have_group_replication_plugin.inc |
| 29 |
--let $rpl_skip_group_replication_start= 1 |
| 30 |
--let $rpl_group_replication_single_primary_mode=1 |
| 31 |
--source include/group_replication.inc |
| 32 |
|
| 33 |
--echo |
| 34 |
--echo # 1. Setup group of 2 servers, M1(primary) and M2(secondary). |
| 35 |
|
| 36 |
--let $rpl_connection_name= server1 |
| 37 |
--source include/rpl_connection.inc |
| 38 |
|
| 39 |
--let $server1_uuid= query_get_value(SELECT @@SERVER_UUID, @@SERVER_UUID, 1) |
| 40 |
|
| 41 |
--source include/start_and_bootstrap_group_replication.inc |
| 42 |
|
| 43 |
CREATE TABLE t1(c1 int primary key); |
| 44 |
|
| 45 |
--let $rpl_connection_name= server2 |
| 46 |
--source include/rpl_connection.inc |
| 47 |
|
| 48 |
--let $server2_uuid= query_get_value(SELECT @@SERVER_UUID, @@SERVER_UUID, 1) |
| 49 |
|
| 50 |
--source include/start_group_replication.inc |
| 51 |
|
| 52 |
--echo |
| 53 |
--echo # 2. Block all commits on server1 and initiate a transaction. |
| 54 |
--echo # Begin change of primary from server2(secondary). |
| 55 |
|
| 56 |
--let $rpl_connection_name= server1 |
| 57 |
--source include/rpl_connection.inc |
| 58 |
|
| 59 |
SET @@GLOBAL.DEBUG= '+d,trans_delegate_before_commit_before_before_call_observers'; |
| 60 |
|
| 61 |
--send INSERT INTO t1 values(1) |
| 62 |
|
| 63 |
--let $rpl_connection_name= server_1 |
| 64 |
--source include/rpl_connection.inc |
| 65 |
|
| 66 |
SET DEBUG_SYNC= "now WAIT_FOR signal.trans_delegate_before_commit_before_before_call_observers_reached"; |
| 67 |
SET @@GLOBAL.DEBUG= '-d,trans_delegate_before_commit_before_before_call_observers'; |
| 68 |
|
| 69 |
--let $rpl_connection_name= server2 |
| 70 |
--source include/rpl_connection.inc |
| 71 |
|
| 72 |
# There is an ongoing transaction INSERT going on. |
| 73 |
# So UDF group_replication_set_as_primary will start but to |
| 74 |
# finish successfully all ongoing transactions must finish. |
| 75 |
# UDF group_replication_set_as_primary finishes successfully |
| 76 |
# after setting the killed flag in THD running INSERT operation post expiry of |
| 77 |
# timeout and killed transactions are not counted by service |
| 78 |
# `mysql_ongoing_transactions_query` |
| 79 |
--replace_result $server2_uuid SERVER2_UUID |
| 80 |
--eval SELECT group_replication_set_as_primary("$server2_uuid", 0); |
| 81 |
|
| 82 |
--echo |
| 83 |
--echo # 3. Unblock transactions on server1. |
| 84 |
--echo # Transaction should fail it was not committing so it was killed |
| 85 |
--echo # and client connection dropped. |
| 86 |
|
| 87 |
--let $rpl_connection_name= server_1 |
| 88 |
--source include/rpl_connection.inc |
| 89 |
|
| 90 |
SET DEBUG_SYNC= "now SIGNAL signal.trans_delegate_before_commit_before_before_call_observers_waiting"; |
| 91 |
|
| 92 |
--let $rpl_connection_name= server1 |
| 93 |
--source include/rpl_connection.inc |
| 94 |
--error CR_SERVER_LOST |
| 95 |
--reap |
| 96 |
|
| 97 |
--enable_reconnect |
| 98 |
--source include/wait_until_connected_again.inc |
| 99 |
--disable_reconnect |
| 100 |
|
| 101 |
SET DEBUG_SYNC= 'RESET'; |
| 102 |
|
| 103 |
--echo |
| 104 |
--echo # 4. Assert primary changed. |
| 105 |
--echo # Assert data is not present on M1 and M2. |
| 106 |
|
| 107 |
--let $rpl_connection_name= server2 |
| 108 |
--source include/rpl_connection.inc |
| 109 |
|
| 110 |
--source include/gr_assert_primary_member.inc |
| 111 |
|
| 112 |
--let $rpl_connection_name= server1 |
| 113 |
--source include/rpl_connection.inc |
| 114 |
|
| 115 |
--source include/gr_assert_secondary_member.inc |
| 116 |
|
| 117 |
--let $assert_text= 'There is no value 1 in table t1.' |
| 118 |
--let $assert_cond= [SELECT COUNT(*) AS count FROM t1 WHERE t1.c1 = 1, count, 1] = 0 |
| 119 |
--source include/assert.inc |
| 120 |
|
| 121 |
--let $diff_tables= server1:test.t1, server2:test.t1 |
| 122 |
--source include/diff_tables.inc |
| 123 |
|
| 124 |
--echo |
| 125 |
--echo # 5. Block all commits on server2 and initiate a transaction. |
| 126 |
--echo # Begin change of primary from server2(primary). |
| 127 |
|
| 128 |
--let $rpl_connection_name= server2 |
| 129 |
--source include/rpl_connection.inc |
| 130 |
|
| 131 |
SET @@GLOBAL.DEBUG= '+d,trans_delegate_before_commit_before_before_call_observers'; |
| 132 |
|
| 133 |
--send INSERT INTO t1 values(1) |
| 134 |
|
| 135 |
--let $rpl_connection_name= server_2 |
| 136 |
--source include/rpl_connection.inc |
| 137 |
|
| 138 |
SET DEBUG_SYNC= "now WAIT_FOR signal.trans_delegate_before_commit_before_before_call_observers_reached"; |
| 139 |
SET @@GLOBAL.DEBUG= '-d,trans_delegate_before_commit_before_before_call_observers'; |
| 140 |
|
| 141 |
--replace_result $server1_uuid SERVER1_UUID |
| 142 |
--eval SELECT group_replication_set_as_primary("$server1_uuid", 2); |
| 143 |
|
| 144 |
--echo |
| 145 |
--echo # 6. Unblock transactions on server2. |
| 146 |
--echo # Transaction should fail it was not committing so it was killed |
| 147 |
--echo # and client connection dropped. |
| 148 |
|
| 149 |
SET DEBUG_SYNC= "now SIGNAL signal.trans_delegate_before_commit_before_before_call_observers_waiting"; |
| 150 |
|
| 151 |
--let $rpl_connection_name= server2 |
| 152 |
--source include/rpl_connection.inc |
| 153 |
|
| 154 |
--error CR_SERVER_LOST |
| 155 |
--reap |
| 156 |
|
| 157 |
--enable_reconnect |
| 158 |
--source include/wait_until_connected_again.inc |
| 159 |
--disable_reconnect |
| 160 |
|
| 161 |
SET DEBUG_SYNC= 'RESET'; |
| 162 |
|
| 163 |
--echo |
| 164 |
--echo # 7. Assert primary changed. |
| 165 |
--echo # Assert data is not present on M1 and M2. |
| 166 |
|
| 167 |
--let $rpl_connection_name= server1 |
| 168 |
--source include/rpl_connection.inc |
| 169 |
|
| 170 |
--source include/gr_assert_primary_member.inc |
| 171 |
|
| 172 |
--let $rpl_connection_name= server2 |
| 173 |
--source include/rpl_connection.inc |
| 174 |
|
| 175 |
--source include/gr_assert_secondary_member.inc |
| 176 |
|
| 177 |
--let $assert_text= 'There is no value 1 in table t1.' |
| 178 |
--let $assert_cond= [SELECT COUNT(*) AS count FROM t1 WHERE t1.c1 = 1, count, 1] = 0 |
| 179 |
--source include/assert.inc |
| 180 |
|
| 181 |
--let $diff_tables= server1:test.t1, server2:test.t1 |
| 182 |
--source include/diff_tables.inc |
| 183 |
|
| 184 |
--echo |
| 185 |
--echo # 8. Cleanup. |
| 186 |
|
| 187 |
--let $rpl_connection_name= server1 |
| 188 |
--source include/rpl_connection.inc |
| 189 |
|
| 190 |
DROP TABLE t1; |
| 191 |
--source include/rpl_sync.inc |
| 192 |
|
| 193 |
--source include/group_replication_end.inc |