| 1 |
################################################################################ |
| 2 |
# Verify that when Group Replication is used, on server |
| 3 |
# start the certifier's sequence number is loaded from the |
| 4 |
# relay log (already certified transactions, if any) and from |
| 5 |
# GTID_EXECUTED (applied transactions). |
| 6 |
# |
| 7 |
# Test: |
| 8 |
# 0. The test requires two servers: M1 and M2. |
| 9 |
# 1. Bootstrap start group on M1. Start GR on M2. Stop applier thread on M2. |
| 10 |
# Create table and insert some data on M1. |
| 11 |
# 2. Wait until M2 receives and certify the transactions. Restart server M2. |
| 12 |
# Verify that certifier sequence number is set from relay log certified |
| 13 |
# transactions and view change transactions. |
| 14 |
# Set DEBUG point and start GR on M2. |
| 15 |
# 3. On M2, try to insert duplicate entry. It must fail with duplicate entry. |
| 16 |
# Insert non duplicate entry. It must pass. |
| 17 |
# 4. Kill M2 again and verify that certifier sequence number is set from |
| 18 |
# GTID_EXECUTED. Set DEBUG point and start GR on M2. |
| 19 |
# 5. Shutdown. |
| 20 |
################################################################################ |
| 21 |
# This test does crashes servers, thence we skip it on valgrind. |
| 22 |
--source include/not_valgrind.inc |
| 23 |
--source include/have_debug.inc |
| 24 |
--source include/have_debug_sync.inc |
| 25 |
--source include/force_restart.inc |
| 26 |
--let $group_replication_group_name= 8a94f357-aab4-11df-86ab-c80aa9429576 |
| 27 |
--source include/have_group_replication_plugin.inc |
| 28 |
|
| 29 |
--let $use_gtids=1 |
| 30 |
--let $wait_for_executed_gtid_set=1 |
| 31 |
|
| 32 |
--echo ############################################################ |
| 33 |
--echo # 1. Start servers, on which server2 has applier stopped so |
| 34 |
--echo # that all remote transactions are only queued on relay log. |
| 35 |
--echo # Execute some transactions on server1. |
| 36 |
--connection server1 |
| 37 |
--source include/start_and_bootstrap_group_replication.inc |
| 38 |
|
| 39 |
set session sql_log_bin=0; |
| 40 |
call mtr.add_suppression("The member lost contact with a majority of the members in the group. Until the network is restored.*"); |
| 41 |
call mtr.add_suppression("The member resumed contact with a majority of the members in the group.*"); |
| 42 |
set session sql_log_bin=1; |
| 43 |
|
| 44 |
--connection server2 |
| 45 |
SET SESSION sql_log_bin = 0; |
| 46 |
call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Relay log read failure: Could not parse relay log event entry.*"); |
| 47 |
call mtr.add_suppression("The applier thread execution was aborted. Unable to process more transactions, this member will now leave the group."); |
| 48 |
call mtr.add_suppression("Fatal error during execution on the Applier process of Group Replication. The server will now leave the group."); |
| 49 |
call mtr.add_suppression("The server was automatically set into read only mode after an error was detected."); |
| 50 |
call mtr.add_suppression("Skipping leave operation: concurrent attempt to leave the group is on-going."); |
| 51 |
SET SESSION sql_log_bin = 1; |
| 52 |
SET @debug_saved= @@GLOBAL.DEBUG; |
| 53 |
--source include/start_group_replication.inc |
| 54 |
--let $member2_uuid= query_get_value(SELECT @@SERVER_UUID, @@SERVER_UUID, 1) |
| 55 |
|
| 56 |
# Do not apply certified remote transactions. |
| 57 |
SET @@GLOBAL.DEBUG='+d,block_applier_updates'; |
| 58 |
|
| 59 |
--connection server1 |
| 60 |
--let $group_replication_number_of_members= 2 |
| 61 |
--source include/gr_wait_for_number_of_members.inc |
| 62 |
CREATE TABLE t1 (c1 INT NOT NULL PRIMARY KEY) ENGINE=InnoDB; |
| 63 |
INSERT INTO t1 VALUES (1); |
| 64 |
|
| 65 |
--echo |
| 66 |
--echo ##################################################################### |
| 67 |
--echo # 2. Restart server2 and verify that certifier sequence number is set |
| 68 |
--echo # from relay log certified transactions and view change transactions |
| 69 |
--connection server2 |
| 70 |
SET DEBUG_SYNC = "now WAIT_FOR applier_read_blocked"; |
| 71 |
# Wait until server receives and certify the transactions. |
| 72 |
--let $wait_condition= SELECT (Count_transactions_checked - Count_conflicts_detected) = 2 from performance_schema.replication_group_member_stats |
| 73 |
--source include/wait_condition.inc |
| 74 |
|
| 75 |
# Force GR to stop without commit the received transactions. |
| 76 |
SET @@GLOBAL.DEBUG='-d,block_applier_updates'; |
| 77 |
SET @@GLOBAL.DEBUG='+d,force_sql_thread_error'; |
| 78 |
SET DEBUG_SYNC = "now SIGNAL resume_applier_read"; |
| 79 |
--let $group_replication_member_state= ERROR |
| 80 |
--source include/gr_wait_for_member_state.inc |
| 81 |
SET @@GLOBAL.DEBUG='-d,force_sql_thread_error'; |
| 82 |
SET DEBUG_SYNC= 'RESET'; |
| 83 |
|
| 84 |
--let $_group_replication_local_address= `SELECT @@GLOBAL.group_replication_local_address` |
| 85 |
--let $_group_replication_group_seeds= `SELECT @@GLOBAL.group_replication_group_seeds` |
| 86 |
--let $restart_parameters=restart:--group_replication_local_address=$_group_replication_local_address --group_replication_group_seeds=$_group_replication_group_seeds |
| 87 |
--replace_result $_group_replication_local_address GROUP_REPLICATION_LOCAL_ADDRESS $_group_replication_group_seeds GROUP_REPLICATION_GROUP_SEEDS |
| 88 |
--source include/restart_mysqld.inc |
| 89 |
SET @@GLOBAL.DEBUG= '+d,certifier_assert_next_seqno_equal_5'; |
| 90 |
--source include/start_group_replication.inc |
| 91 |
SET @@GLOBAL.DEBUG= @debug_saved; |
| 92 |
|
| 93 |
--echo ############################################################ |
| 94 |
--echo # 3. Insert must fail with duplicate entry. |
| 95 |
--error ER_DUP_ENTRY |
| 96 |
INSERT INTO t1 VALUES (1); |
| 97 |
|
| 98 |
INSERT INTO t1 VALUES (2); |
| 99 |
|
| 100 |
--echo |
| 101 |
--echo ############################################################ |
| 102 |
--echo # 4. Kill server2 again and verify that certifier sequence |
| 103 |
--echo # number is set from GTID_EXECUTED. |
| 104 |
|
| 105 |
# kill server 2 |
| 106 |
--let $restart_parameters=restart:--group_replication_local_address=$_group_replication_local_address --group_replication_group_seeds=$_group_replication_group_seeds |
| 107 |
--replace_result $_group_replication_local_address GROUP_REPLICATION_LOCAL_ADDRESS $_group_replication_group_seeds GROUP_REPLICATION_GROUP_SEEDS |
| 108 |
--source include/kill_and_restart_mysqld.inc |
| 109 |
|
| 110 |
#Needed as we are not using rpl_restart_server.inc |
| 111 |
--let $rpl_connection_name= server2 |
| 112 |
--source include/rpl_connection.inc |
| 113 |
--enable_reconnect |
| 114 |
|
| 115 |
# Wait until group has only 1 member, that is, server2 death is detected by |
| 116 |
# the group. |
| 117 |
--let $rpl_connection_name= server1 |
| 118 |
--source include/rpl_connection.inc |
| 119 |
|
| 120 |
--let $group_replication_member_state= UNREACHABLE |
| 121 |
--let $group_replication_member_id= $member2_uuid |
| 122 |
--source include/gr_wait_for_member_state.inc |
| 123 |
|
| 124 |
# unblock the group, since server1 has gone away and |
| 125 |
# there were only two in the group - majority lost |
| 126 |
--let $local_address_server1= `SELECT @@GLOBAL.group_replication_local_address` |
| 127 |
--disable_query_log |
| 128 |
# Reseting the group to server1 only |
| 129 |
--eval SET GLOBAL group_replication_force_members= "$local_address_server1" |
| 130 |
--enable_query_log |
| 131 |
|
| 132 |
--let $group_replication_number_of_members= 1 |
| 133 |
--source include/gr_wait_for_number_of_members.inc |
| 134 |
|
| 135 |
--let $rpl_connection_name= server2 |
| 136 |
--source include/rpl_connection.inc |
| 137 |
SET @@GLOBAL.DEBUG= '+d,certifier_assert_next_seqno_equal_7'; |
| 138 |
--source include/start_group_replication.inc |
| 139 |
SET @@GLOBAL.DEBUG= @debug_saved; |
| 140 |
|
| 141 |
--echo |
| 142 |
--echo ############################################################ |
| 143 |
--echo # 5. Shutdown. |
| 144 |
|
| 145 |
--connection server1 |
| 146 |
--let $group_replication_number_of_members= 2 |
| 147 |
--source include/gr_wait_for_number_of_members.inc |
| 148 |
DROP TABLE t1; |
| 149 |
|
| 150 |
--let $sync_slave_connection= server2 |
| 151 |
--source include/sync_slave_sql_with_master.inc |
| 152 |
|
| 153 |
--connection server1 |
| 154 |
--source include/stop_group_replication.inc |
| 155 |
RESET SLAVE ALL FOR CHANNEL "group_replication_applier"; |
| 156 |
RESET MASTER; |
| 157 |
|
| 158 |
--connection server2 |
| 159 |
--source include/stop_group_replication.inc |
| 160 |
RESET SLAVE ALL FOR CHANNEL "group_replication_applier"; |
| 161 |
RESET MASTER; |
| 162 |
|
| 163 |
--source include/gr_clear_configuration.inc |