| 1 |
################################################################################ |
| 2 |
# This test evaluates the limit case where no more donors remain in the group. |
| 3 |
# It is divided into 2 separated but similar phases. |
| 4 |
# Phase 1: |
| 5 |
# A node joins but all the members/donors leave. |
| 6 |
# Recovery fails and the member leaves |
| 7 |
# Phase 2: |
| 8 |
# A node joins and the only donor leaves remaining another member on recovery. |
| 9 |
# Recovery should fail on both members. |
| 10 |
# |
| 11 |
# Test: |
| 12 |
# 0. The test requires three servers: M1, M2 and M3. |
| 13 |
# 1. Setup a new 2 member group. Bootstrap start GR on M1. Insert some data |
| 14 |
# for recovery on M1. Start GR on M2. Block the applier on both servers to |
| 15 |
# block recovery |
| 16 |
# Phase 1: |
| 17 |
# 2. Start recovery on a new member M3. Identify the donor, stop GR on donor. |
| 18 |
# Identify the failover donor, stop GR on the last donor. |
| 19 |
# 3. Recovery should fail on the joiner M3. Check M3 goes in ERROR state. |
| 20 |
# Phase 2: |
| 21 |
# 4. Bootstrap start GR on M1. Block the applier on M1. Start GR on M2. Check |
| 22 |
# M2 is in recovering state. |
| 23 |
# 5. To avoid issues with simultaneous exits from the group set DEBUG in M3. |
| 24 |
# START GR on M3. Check M3 is in recovering state. |
| 25 |
# 6. Stop GR on M1. Recovery should fail on both joiners i.e. check M2 goes |
| 26 |
# in ERROR state, send SIGNAL on M3, check M3 goes in ERROR state. |
| 27 |
# 7. Clean up. |
| 28 |
################################################################################ |
| 29 |
|
| 30 |
--source include/big_test.inc |
| 31 |
--source include/have_debug.inc |
| 32 |
--source include/have_debug_sync.inc |
| 33 |
--let $group_replication_group_name=0645c380-262c-11e5-867f-0800200c9a66 |
| 34 |
--source include/have_group_replication_plugin.inc |
| 35 |
--let $rpl_skip_group_replication_start= 1 |
| 36 |
--let $rpl_server_count= 3 |
| 37 |
--source include/group_replication.inc |
| 38 |
|
| 39 |
--echo # |
| 40 |
--echo # Setup a new 2 member group |
| 41 |
--echo # |
| 42 |
|
| 43 |
--connection server1 |
| 44 |
|
| 45 |
SET SESSION sql_log_bin= 0; |
| 46 |
call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Relay log read failure: Could not parse relay log event entry.*"); |
| 47 |
call mtr.add_suppression("The applier thread execution was aborted. Unable to process more transactions, this member will now leave the group."); |
| 48 |
call mtr.add_suppression("Fatal error during execution on the Applier process of Group Replication. The server will now leave the group."); |
| 49 |
call mtr.add_suppression("The server was automatically set into read only mode after an error was detected."); |
| 50 |
call mtr.add_suppression("Skipping leave operation: concurrent attempt to leave the group is on-going."); |
| 51 |
SET SESSION sql_log_bin= 1; |
| 52 |
|
| 53 |
#extract server uuid for donor calculations below |
| 54 |
--let $server1_uuid= query_get_value(SELECT @@SERVER_UUID, @@SERVER_UUID, 1) |
| 55 |
--source include/start_and_bootstrap_group_replication.inc |
| 56 |
|
| 57 |
#insert some data |
| 58 |
CREATE TABLE t1 (c1 INT NOT NULL PRIMARY KEY) ENGINE=InnoDB; |
| 59 |
INSERT INTO t1 VALUES (1); |
| 60 |
|
| 61 |
--connection server2 |
| 62 |
|
| 63 |
SET SESSION sql_log_bin= 0; |
| 64 |
call mtr.add_suppression("The member is leaving a group without being on one"); |
| 65 |
call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Relay log read failure: Could not parse relay log event entry.*"); |
| 66 |
call mtr.add_suppression("The applier thread execution was aborted. Unable to process more transactions, this member will now leave the group."); |
| 67 |
call mtr.add_suppression("Fatal error during execution on the Applier process of Group Replication. The server will now leave the group."); |
| 68 |
call mtr.add_suppression("The server was automatically set into read only mode after an error was detected."); |
| 69 |
call mtr.add_suppression("Skipping leave operation: concurrent attempt to leave the group is on-going."); |
| 70 |
SET SESSION sql_log_bin= 1; |
| 71 |
|
| 72 |
#extract server uuid for donor calculations below |
| 73 |
--let $server2_uuid= query_get_value(SELECT @@SERVER_UUID, @@SERVER_UUID, 1) |
| 74 |
--source include/start_group_replication.inc |
| 75 |
|
| 76 |
#Block the applier on both servers to block recovery |
| 77 |
SET @@GLOBAL.DEBUG='+d,block_applier_updates'; |
| 78 |
|
| 79 |
--connection server1 |
| 80 |
|
| 81 |
SET @@GLOBAL.DEBUG='+d,block_applier_updates'; |
| 82 |
|
| 83 |
--echo # |
| 84 |
--echo # Phase 1: |
| 85 |
--echo # Start recovery on a new member and kill both donors |
| 86 |
--echo # |
| 87 |
|
| 88 |
--connection server3 |
| 89 |
SET SESSION sql_log_bin= 0; |
| 90 |
call mtr.add_suppression("No suitable donor found, group replication recovery aborting."); |
| 91 |
call mtr.add_suppression("Fatal error during the incremental recovery process of Group Replication. The server will leave the group."); |
| 92 |
call mtr.add_suppression("The server was automatically set into read only mode after an error was detected."); |
| 93 |
call mtr.add_suppression("All donors left. Aborting group replication incremental recovery."); |
| 94 |
call mtr.add_suppression("Maximum number of retries when trying to connect to a donor reached. Aborting group replication incremental recovery."); |
| 95 |
call mtr.add_suppression("The member is leaving a group without being on one"); |
| 96 |
call mtr.add_suppression("The member is already leaving or joining a group."); |
| 97 |
call mtr.add_suppression("Error leaving the group"); |
| 98 |
call mtr.add_suppression("Skipping leave operation: concurrent attempt to leave the group is on-going."); |
| 99 |
SET SESSION sql_log_bin= 1; |
| 100 |
|
| 101 |
--let $group_replication_start_member_state= RECOVERING |
| 102 |
--source include/start_group_replication.inc |
| 103 |
|
| 104 |
--echo # Find if server 1 or 2 is the donor |
| 105 |
|
| 106 |
#give it time to connect |
| 107 |
--sleep 5 |
| 108 |
|
| 109 |
#Find what member is the donor |
| 110 |
--let $donor_id= 1 |
| 111 |
--let $failover= 2 |
| 112 |
--let $failover_uuid= $server2_uuid |
| 113 |
if (`SELECT COUNT(*)=1 FROM performance_schema.replication_connection_status WHERE channel_name='group_replication_recovery' AND service_state='ON' AND source_uuid='$server2_uuid'`) |
| 114 |
{ |
| 115 |
--let $donor_id= 2 |
| 116 |
--let $failover= 1 |
| 117 |
--let $failover_uuid= $server1_uuid |
| 118 |
} |
| 119 |
|
| 120 |
--echo # Stop group replication on the donor making it leave the group |
| 121 |
--connection server$donor_id |
| 122 |
SET DEBUG_SYNC = "now WAIT_FOR applier_read_blocked"; |
| 123 |
SET @@GLOBAL.DEBUG='-d,block_applier_updates'; |
| 124 |
SET @@GLOBAL.DEBUG='+d,force_sql_thread_error'; |
| 125 |
SET DEBUG_SYNC = "now SIGNAL resume_applier_read"; |
| 126 |
--let $group_replication_member_state= ERROR |
| 127 |
--source include/gr_wait_for_member_state.inc |
| 128 |
SET @@GLOBAL.DEBUG='-d,force_sql_thread_error'; |
| 129 |
--source include/stop_group_replication.inc |
| 130 |
|
| 131 |
# Wait for the joiner to failover to the other member |
| 132 |
--connection server3 |
| 133 |
--let $wait_condition= SELECT COUNT(*)=1 FROM performance_schema.replication_connection_status WHERE channel_name='group_replication_recovery' AND service_state='ON' AND source_uuid="$failover_uuid"; |
| 134 |
--source include/wait_condition.inc |
| 135 |
|
| 136 |
--echo # Stop group replication on the failover donor making it leave the group |
| 137 |
--connection server$failover |
| 138 |
SET DEBUG_SYNC = "now WAIT_FOR applier_read_blocked"; |
| 139 |
SET @@GLOBAL.DEBUG='-d,block_applier_updates'; |
| 140 |
SET @@GLOBAL.DEBUG='+d,force_sql_thread_error'; |
| 141 |
SET DEBUG_SYNC = "now SIGNAL resume_applier_read"; |
| 142 |
--let $group_replication_member_state= ERROR |
| 143 |
--source include/gr_wait_for_member_state.inc |
| 144 |
SET @@GLOBAL.DEBUG='-d,force_sql_thread_error'; |
| 145 |
--source include/stop_group_replication.inc |
| 146 |
|
| 147 |
--echo # Recovery should fail on the joiner |
| 148 |
--connection server3 |
| 149 |
|
| 150 |
--let $group_replication_member_state= ERROR |
| 151 |
--source include/gr_wait_for_member_state.inc |
| 152 |
|
| 153 |
--source include/stop_group_replication.inc |
| 154 |
|
| 155 |
--echo # |
| 156 |
--echo # Phase 2 |
| 157 |
--echo # Have 2 members on recovery and kill the donor |
| 158 |
--echo # |
| 159 |
|
| 160 |
#sleep so a different view id is generated |
| 161 |
--sleep 1 |
| 162 |
|
| 163 |
--connection server1 |
| 164 |
--source include/start_and_bootstrap_group_replication.inc |
| 165 |
|
| 166 |
# Block the applier on server 1 so view change event wont be written and recovery blocks on other servers |
| 167 |
SET @@GLOBAL.DEBUG='+d,block_applier_updates'; |
| 168 |
|
| 169 |
--echo # Start recovery on the other 2 members |
| 170 |
|
| 171 |
--connection server2 |
| 172 |
|
| 173 |
SET SESSION sql_log_bin= 0; |
| 174 |
call mtr.add_suppression("No suitable donor found, group replication recovery aborting."); |
| 175 |
call mtr.add_suppression("Fatal error during the incremental recovery process of Group Replication. The server will leave the group."); |
| 176 |
call mtr.add_suppression("The server was automatically set into read only mode after an error was detected."); |
| 177 |
call mtr.add_suppression("Maximum number of retries when trying to connect to a donor reached. Aborting group replication incremental recovery."); |
| 178 |
call mtr.add_suppression("The member is leaving a group without being on one"); |
| 179 |
call mtr.add_suppression("The member is already leaving or joining a group."); |
| 180 |
call mtr.add_suppression("Error leaving the group"); |
| 181 |
call mtr.add_suppression("Skipping leave operation: concurrent attempt to leave the group is on-going."); |
| 182 |
SET SESSION sql_log_bin= 1; |
| 183 |
|
| 184 |
--let $server2_reconnect_interval= `SELECT @@GLOBAL.group_replication_recovery_reconnect_interval;` |
| 185 |
--let $server2_retry_count= `SELECT @@GLOBAL.group_replication_recovery_retry_count;` |
| 186 |
|
| 187 |
SET GLOBAL group_replication_recovery_reconnect_interval= 1; |
| 188 |
SET GLOBAL group_replication_recovery_retry_count= 2; |
| 189 |
|
| 190 |
--let $group_replication_start_member_state= RECOVERING |
| 191 |
--source include/start_group_replication.inc |
| 192 |
|
| 193 |
--connection server3 |
| 194 |
|
| 195 |
# Here to avoid issues with simultaneous exits from the group (serve 2 and 3) |
| 196 |
SET @debug_save= @@GLOBAL.DEBUG; |
| 197 |
SET @@GLOBAL.DEBUG='d,recovery_thread_wait_before_finish'; |
| 198 |
|
| 199 |
--let $server3_reconnect_interval= `SELECT @@GLOBAL.group_replication_recovery_reconnect_interval;` |
| 200 |
--let $server3_retry_count= `SELECT @@GLOBAL.group_replication_recovery_retry_count;` |
| 201 |
|
| 202 |
SET GLOBAL group_replication_recovery_reconnect_interval= 1; |
| 203 |
SET GLOBAL group_replication_recovery_retry_count= 2; |
| 204 |
|
| 205 |
--let $group_replication_start_member_state= RECOVERING |
| 206 |
--source include/start_group_replication.inc |
| 207 |
|
| 208 |
--echo # Stop group replication on the donor making it leave the group |
| 209 |
--connection server1 |
| 210 |
SET DEBUG_SYNC = "now WAIT_FOR applier_read_blocked"; |
| 211 |
SET @@GLOBAL.DEBUG='-d,block_applier_updates'; |
| 212 |
SET @@GLOBAL.DEBUG='+d,force_sql_thread_error'; |
| 213 |
SET DEBUG_SYNC = "now SIGNAL resume_applier_read"; |
| 214 |
--let $group_replication_member_state= ERROR |
| 215 |
--source include/gr_wait_for_member_state.inc |
| 216 |
SET @@GLOBAL.DEBUG='-d,force_sql_thread_error'; |
| 217 |
--source include/stop_group_replication.inc |
| 218 |
|
| 219 |
--echo # Recovery should fail on both joiners |
| 220 |
|
| 221 |
--connection server2 |
| 222 |
|
| 223 |
--let $group_replication_member_state= ERROR |
| 224 |
--source include/gr_wait_for_member_state.inc |
| 225 |
|
| 226 |
--source include/stop_group_replication.inc |
| 227 |
|
| 228 |
--connection server3 |
| 229 |
|
| 230 |
SET DEBUG_SYNC= "now SIGNAL signal.recovery_end"; |
| 231 |
|
| 232 |
--let $group_replication_member_state= ERROR |
| 233 |
--source include/gr_wait_for_member_state.inc |
| 234 |
|
| 235 |
--source include/stop_group_replication.inc |
| 236 |
|
| 237 |
--echo # |
| 238 |
--echo # Cleaning up |
| 239 |
--echo # |
| 240 |
|
| 241 |
#sleep so a different view id is generated |
| 242 |
--sleep 1 |
| 243 |
|
| 244 |
--connection server1 |
| 245 |
SET DEBUG_SYNC= 'RESET'; |
| 246 |
--source include/start_and_bootstrap_group_replication.inc |
| 247 |
|
| 248 |
--connection server2 |
| 249 |
SET DEBUG_SYNC= 'RESET'; |
| 250 |
|
| 251 |
--disable_query_log |
| 252 |
--eval SET GLOBAL group_replication_recovery_reconnect_interval= $server2_reconnect_interval |
| 253 |
--eval SET GLOBAL group_replication_recovery_retry_count= $server2_retry_count |
| 254 |
--enable_query_log |
| 255 |
|
| 256 |
--source include/start_group_replication.inc |
| 257 |
|
| 258 |
--let $assert_text= On the recovered member, the table should exist and have 1 elements |
| 259 |
--let $assert_cond= [SELECT COUNT(*) FROM t1] = 1; |
| 260 |
--source include/assert.inc |
| 261 |
|
| 262 |
--connection server3 |
| 263 |
|
| 264 |
SET @@GLOBAL.DEBUG= @debug_save; |
| 265 |
|
| 266 |
--disable_query_log |
| 267 |
--eval SET GLOBAL group_replication_recovery_reconnect_interval= $server3_reconnect_interval |
| 268 |
--eval SET GLOBAL group_replication_recovery_retry_count= $server3_retry_count |
| 269 |
--enable_query_log |
| 270 |
|
| 271 |
--source include/start_group_replication.inc |
| 272 |
|
| 273 |
--let $assert_text= On the recovered member, the table should exist and have 1 elements |
| 274 |
--let $assert_cond= [SELECT COUNT(*) FROM t1] = 1; |
| 275 |
--source include/assert.inc |
| 276 |
|
| 277 |
--connection server1 |
| 278 |
|
| 279 |
DROP TABLE t1; |
| 280 |
|
| 281 |
--source include/group_replication_end.inc |