Debian Codegraph @

mysql-test/suite/group_replication/t/gr_autorejoin_error_during_rejoin.test

raw
1 ################################################################################
2 #
3 # The auto-rejoin process is a mechanism that allows a server that left the
4 # group due to flaky network (either on his side or on the other members) to
5 # try to join again up to group_replication_autorejoin_tries number of times.
6 #
7 # This test shall verify that if a concurrent error to autorejoin happens, the
8 # member will preserve its ERROR state.
9 #
10 # Test:
11 # 0) The test requires three servers.
12 # 1) Add a local transaction to server1 so that it does fail on rejoin.
13 # 2) Provoke a majority loss.
14 # 3) Verify that the member in the partitioned group will try to rejoin the
15 # group the number of it is configured in
16 # group_replication_autorejoin_tries sysvar.
17 # 4) Verify that once it rejoins the applier error is triggered and member
18 # remains in ERROR state.
19 # 5) Cleanup.
20 #
21 ################################################################################
22 --source include/have_debug_sync.inc
23 --source include/big_test.inc
24 --source include/have_group_replication_plugin.inc
25 #
26 # We manually start the group because we need to set the rejoin timeout before
27 # the START GROUP_REPLICATION command.
28 #
29 --let $rpl_skip_group_replication_start= 1
30 --let $rpl_server_count = 3
31 --source include/group_replication.inc
32
33 --echo
34 --echo ####
35 --echo # 0) The test requires three servers.
36 --echo ####
37 --echo
38 SET SESSION sql_log_bin = 0;
39 call mtr.add_suppression("This member could not reach a majority of the members for more than 10 seconds. The member will now leave the group as instructed by the group_replication_unreachable_majority_timeout option");
40 call mtr.add_suppression("The server was automatically set into read only mode after an error was detected.");
41 call mtr.add_suppression("\\[GCS\\] Timeout while waiting for the group communication engine to exit!");
42 call mtr.add_suppression("\\[GCS\\] The member has failed to gracefully leave the group.");
43 call mtr.add_suppression("Started auto-rejoin procedure attempt*");
44 call mtr.add_suppression("Auto-rejoin procedure attempt*");
45 call mtr.add_suppression("Unable to initialize the Group Replication applier module.");
46 call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Could not execute Update_rows event on table test.t1; Duplicate entry '1' for key 't1.PRIMARY'.*");
47 call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Worker .* failed executing transaction .*; Could not execute Update_rows event on table test.t1; Duplicate entry '1' for key 't1.PRIMARY'*");
48 call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': ... The replica coordinator and worker threads are stopped,*");
49 call mtr.add_suppression("The applier thread execution was aborted. Unable to process more transactions, this member will now leave the group.");
50 call mtr.add_suppression("Fatal error during execution on the Applier process of Group Replication. The server will now leave the group.");
51 call mtr.add_suppression("Unable to confirm whether the server has left the group or not. Check performance_schema.replication_group_members to check group membership information.");
52 SET SESSION sql_log_bin = 1;
53
54 --source include/gr_autorejoin_monitoring.inc
55
56 SET @debug_saved = @@GLOBAL.DEBUG;
57 SET @@GLOBAL.DEBUG='+d,group_replication_rejoin_short_retry';
58 SET @@GLOBAL.DEBUG='+d,group_replication_stop_before_rejoin_loop';
59
60 --source include/start_and_bootstrap_group_replication.inc
61 CREATE TABLE t1(a INT PRIMARY KEY);
62
63 --let $rpl_connection_name = server2
64 --source include/rpl_connection.inc
65
66 --source include/start_group_replication.inc
67 --let $local_address_server2= `SELECT @@GLOBAL.group_replication_local_address`
68 --let $group_seeds_server2= `SELECT @@GLOBAL.group_replication_group_seeds`
69
70 --let $rpl_connection_name = server3
71 --source include/rpl_connection.inc
72
73 --source include/start_group_replication.inc
74 --let $local_address_server3= `SELECT @@GLOBAL.group_replication_local_address`
75
76 --echo
77 --echo ####
78 --echo # 1) Add a local transaction to server1 so that it does fail on rejoin.
79 --echo ####
80 --let $rpl_connection_name = server1
81 --source include/rpl_connection.inc
82 SET @@GLOBAL.DEBUG='+d,block_applier_updates';
83
84 --let $rpl_connection_name = server2
85 --source include/rpl_connection.inc
86 INSERT INTO t1 VALUES(0);
87 UPDATE t1 SET a=1 WHERE a=0;
88
89 --let $rpl_connection_name = server3
90 --source include/rpl_connection.inc
91 --let $wait_condition= SELECT @@GLOBAL.GTID_EXECUTED = "$group_replication_group_name:1-6"
92 --source include/wait_condition.inc
93
94 --let $rpl_connection_name = server1
95 --source include/rpl_connection.inc
96 --let $wait_condition= SELECT received_transaction_set="$group_replication_group_name:1-6" FROM performance_schema.replication_connection_status WHERE channel_name="group_replication_applier";
97 --source include/wait_condition.inc
98
99 SET DEBUG_SYNC = "now WAIT_FOR applier_read_blocked";
100
101 # Cause a applier error during recovery when plugins tries to rejoin.
102 SET SESSION sql_log_bin= 0;
103 INSERT INTO t1 VALUES(1);
104 SET SESSION sql_log_bin= 1;
105
106 --echo
107 --echo ####
108 --echo # 2) Provoke a majority loss.
109 --echo ####
110 --echo
111 --let $rpl_connection_name = server1
112 --source include/rpl_connection.inc
113
114 SET GLOBAL group_replication_autorejoin_tries = 1;
115
116 # Provoke a majority loss on member 1
117 --let $member_id = `SELECT @@GLOBAL.server_uuid`
118 --source include/gr_provoke_majority_loss.inc
119
120 SET DEBUG_SYNC = "now WAIT_FOR signal.autorejoin_entering_loop";
121
122 --echo
123 --echo ####
124 --echo # 3) Verify that the member in the partitioned group will try to rejoin the
125 --echo # group the number of it is configured in
126 --echo # group_replication_autorejoin_tries sysvar.
127 --echo ####
128 --let $rpl_server_number= 2
129 --source include/rpl_reconnect.inc
130
131 --let $rpl_connection_name= server2
132 --source include/rpl_connection.inc
133
134 --replace_result $group_seeds_server2 GROUP_SEEDS_SERVER2
135 --eval SET @@global.group_replication_group_seeds="$group_seeds_server2"
136 --replace_result $local_address_server2 LOCAL_ADDRESS_SERVER2
137 --eval SET @@global.group_replication_local_address="$local_address_server2"
138 --source include/start_and_bootstrap_group_replication.inc
139
140 --let $rpl_server_number= 3
141 --source include/rpl_reconnect.inc
142
143 --let $rpl_connection_name= server3
144 --source include/rpl_connection.inc
145
146 --replace_result $local_address_server2 LOCAL_ADDRESS_SERVER2
147 --eval SET @@global.group_replication_group_seeds="$local_address_server2"
148 --replace_result $local_address_server3 LOCAL_ADDRESS_SERVER3
149 --eval SET @@global.group_replication_local_address="$local_address_server3"
150 --source include/start_group_replication.inc
151
152 --let $rpl_connection_name = server2
153 --source include/rpl_connection.inc
154 --let $group_replication_number_of_members = 2
155 --source include/gr_wait_for_number_of_members.inc
156 --let $rpl_connection_name = server3
157 --source include/rpl_connection.inc
158 --let $group_replication_number_of_members = 2
159 --source include/gr_wait_for_number_of_members.inc
160
161 --let $rpl_connection_name = server1
162 --source include/rpl_connection.inc
163
164 SET DEBUG_SYNC = "now SIGNAL signal.autorejoin_enter_loop";
165
166 # When the stop applier step of autorejoin is waiting, resume the applier.
167 # The applier will be stopped before the UPDATE statement is committed.
168 --let $gr_applier_module_thread_id= `SELECT THREAD_ID FROM performance_schema.threads WHERE NAME like 'thread/group_rpl/THD_applier_module_receiver'`
169 --let $wait_condition= SELECT COUNT(*)=1 FROM performance_schema.events_waits_current WHERE THREAD_ID=$gr_applier_module_thread_id AND EVENT_NAME='wait/synch/cond/sql/Relay_log_info::stop_cond' AND TIMER_WAIT != 'NULL'
170 --source include/wait_condition.inc
171
172 SET @@GLOBAL.DEBUG='-d,block_applier_updates';
173 SET DEBUG_SYNC = "now SIGNAL resume_applier_read";
174
175 --echo
176 --echo ####
177 --echo # 4) Verify that once it rejoins the applier error is triggered and member
178 --echo # remains in ERROR state.
179 --echo ####
180 --echo
181
182 --let $group_replication_member_state = ERROR
183 --let $group_replication_member_id = $member_id
184 --source include/gr_wait_for_member_state.inc
185
186 --let $wait_condition = SELECT IS_AUTOREJOIN_RUNNING() = FALSE
187 --source include/wait_condition.inc
188
189 --echo
190 --echo ####
191 --echo # 5) Cleanup.
192 --echo ####
193 --echo
194 --let $rpl_connection_name = server1
195 --source include/rpl_connection.inc
196
197 --source include/stop_group_replication.inc
198 SET SESSION sql_log_bin= 0;
199 DROP TABLE t1;
200 SET SESSION sql_log_bin= 1;
201 RESET SLAVE ALL FOR CHANNEL "group_replication_applier";
202 SET @@GLOBAL.DEBUG = @debug_saved;
203 SET DEBUG_SYNC= 'RESET';
204 SET @@GLOBAL.group_replication_autorejoin_tries = default;
205 --source include/gr_end_autorejoin_monitoring.inc
206
207 --let $rpl_connection_name = server2
208 --source include/rpl_connection.inc
209 DROP TABLE t1;
210
211 --source include/group_replication_end.inc