| 1 |
################################################################################ |
| 2 |
# |
| 3 |
# Starting from communication protocol version 8.0.22, XCom will use a single |
| 4 |
# leader consensus algorithm based on Multi-Paxos when running GR in SPM. |
| 5 |
# |
| 6 |
# This test shall verify that, upon switching the group mode from MPM to SPM, |
| 7 |
# when on communication protocol v8.0.22, a single leader is used. It will also |
| 8 |
# test that when switching from MPM to SPM while using a previous communication |
| 9 |
# protocol, the previous consensus algorithm is used (i.e. all members as |
| 10 |
# leaders). |
| 11 |
# |
| 12 |
# Test: |
| 13 |
# 0) The test requires three servers. |
| 14 |
# 1) Switch to SPM on every member. For each member that was elected as primary |
| 15 |
# in SPM, the WRITE_CONSENSUS_LEADERS_MEMBER_ID_PREFERRED and |
| 16 |
# WRITE_CONSENSUS_LEADERS_MEMBER_ID_ACTIVE fields of the |
| 17 |
# performance_schema.replication_group_communication_information PFS table |
| 18 |
# should contain *only* the UUID of that member. |
| 19 |
# 2) Change the communication protocol to 8.0.21. |
| 20 |
# 3) Switch to SPM on every member. For each member that was elected as primary |
| 21 |
# in SPM the WRITE_CONSENSUS_LEADERS_MEMBER_ID_PREFERRED and |
| 22 |
# WRITE_CONSENSUS_LEADERS_MEMBER_ID_ACTIVE fields of the |
| 23 |
# performance_schema.replication_group_communication_information PFS table |
| 24 |
# should contain the UUIDs of *all* the members in the group. |
| 25 |
# 4) Cleanup. |
| 26 |
# |
| 27 |
################################################################################ |
| 28 |
--source include/big_test.inc |
| 29 |
--source include/have_group_replication_plugin.inc |
| 30 |
|
| 31 |
--echo |
| 32 |
--echo #### |
| 33 |
--echo # 0) The test requires three servers. |
| 34 |
--echo #### |
| 35 |
--echo |
| 36 |
--let $rpl_server_count = 3 |
| 37 |
--let $rpl_group_replication_single_primary_mode=0 |
| 38 |
--source include/group_replication.inc |
| 39 |
|
| 40 |
SET SESSION sql_log_bin = 0; |
| 41 |
call mtr.add_suppression("A member is joining the group while a group configuration operation is occurring*"); |
| 42 |
SET SESSION sql_log_bin = 1; |
| 43 |
|
| 44 |
--let $rpl_connection_name= server2 |
| 45 |
--source include/rpl_connection.inc |
| 46 |
SET SESSION sql_log_bin = 0; |
| 47 |
call mtr.add_suppression("A member is joining the group while a group configuration operation is occurring*"); |
| 48 |
SET SESSION sql_log_bin = 1; |
| 49 |
|
| 50 |
--let $rpl_connection_name= server3 |
| 51 |
--source include/rpl_connection.inc |
| 52 |
SET SESSION sql_log_bin = 0; |
| 53 |
call mtr.add_suppression("A member is joining the group while a group configuration operation is occurring*"); |
| 54 |
SET SESSION sql_log_bin = 1; |
| 55 |
|
| 56 |
--echo |
| 57 |
--echo #### |
| 58 |
--echo # 1) Switch to SPM on every member. For each member that was elected as |
| 59 |
--echo # primary in SPM, the WRITE_CONSENSUS_LEADERS_MEMBER_ID_PREFERRED and |
| 60 |
--echo # WRITE_CONSENSUS_LEADERS_MEMBER_ID_ACTIVE fields of the |
| 61 |
--echo # performance_schema.replication_group_communication_information PFS |
| 62 |
--echo # table should contain *only* the UUID of that member. |
| 63 |
--echo #### |
| 64 |
--echo |
| 65 |
--let $rpl_connection_name= server1 |
| 66 |
--source include/rpl_connection.inc |
| 67 |
|
| 68 |
# Elect member 1 |
| 69 |
--let $server1_uuid = `SELECT @@server_uuid` |
| 70 |
--replace_result $server1_uuid MEMBER1_UUID |
| 71 |
--eval SELECT group_replication_switch_to_single_primary_mode("$server1_uuid") |
| 72 |
|
| 73 |
# Verify preferred and active members of member 1 |
| 74 |
--let $assert_text = The first server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 75 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED FROM performance_schema.replication_group_communication_information]" = "$server1_uuid" |
| 76 |
--source include/assert.inc |
| 77 |
--let $assert_text = The first server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 78 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server1_uuid" |
| 79 |
--source include/assert.inc |
| 80 |
--let $assert_text = Single Leader must be enabled |
| 81 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_SINGLE_LEADER_CAPABLE from performance_schema.replication_group_communication_information]" = "1" |
| 82 |
--source include/assert.inc |
| 83 |
|
| 84 |
# Verify preferred and active members of member 2 |
| 85 |
--let $rpl_connection_name= server2 |
| 86 |
--source include/rpl_connection.inc |
| 87 |
--let $assert_text = The first server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 88 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server1_uuid" |
| 89 |
--source include/assert.inc |
| 90 |
--let $assert_text = The first server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 91 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server1_uuid" |
| 92 |
--source include/assert.inc |
| 93 |
--let $assert_text = Single Leader must be enabled |
| 94 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_SINGLE_LEADER_CAPABLE from performance_schema.replication_group_communication_information]" = "1" |
| 95 |
--source include/assert.inc |
| 96 |
|
| 97 |
# Verify preferred and active members of member 3 |
| 98 |
--let $rpl_connection_name= server3 |
| 99 |
--source include/rpl_connection.inc |
| 100 |
--let $assert_text = The first server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 101 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server1_uuid" |
| 102 |
--source include/assert.inc |
| 103 |
--let $assert_text = The first server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 104 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server1_uuid" |
| 105 |
--source include/assert.inc |
| 106 |
--let $assert_text = Single Leader must be enabled |
| 107 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_SINGLE_LEADER_CAPABLE from performance_schema.replication_group_communication_information]" = "1" |
| 108 |
--source include/assert.inc |
| 109 |
|
| 110 |
--let $rpl_connection_name= server3 |
| 111 |
--source include/rpl_connection.inc |
| 112 |
--source include/stop_group_replication.inc |
| 113 |
|
| 114 |
--let $rpl_connection_name= server2 |
| 115 |
--source include/rpl_connection.inc |
| 116 |
--source include/stop_group_replication.inc |
| 117 |
|
| 118 |
--let $rpl_connection_name= server1 |
| 119 |
--source include/rpl_connection.inc |
| 120 |
--source include/stop_group_replication.inc |
| 121 |
|
| 122 |
--let $rpl_connection_name= server1 |
| 123 |
--source include/rpl_connection.inc |
| 124 |
--source include/start_and_bootstrap_group_replication.inc |
| 125 |
|
| 126 |
--let $rpl_connection_name= server2 |
| 127 |
--source include/rpl_connection.inc |
| 128 |
--source include/start_group_replication.inc |
| 129 |
|
| 130 |
--let $rpl_connection_name= server3 |
| 131 |
--source include/rpl_connection.inc |
| 132 |
--source include/start_group_replication.inc |
| 133 |
|
| 134 |
# Elect member 2 |
| 135 |
--let $rpl_connection_name= server2 |
| 136 |
--source include/rpl_connection.inc |
| 137 |
--let $server2_uuid = `SELECT @@server_uuid` |
| 138 |
|
| 139 |
--eval SELECT group_replication_switch_to_multi_primary_mode() |
| 140 |
--replace_result $server2_uuid MEMBER2_UUID |
| 141 |
--eval SELECT group_replication_switch_to_single_primary_mode("$server2_uuid") |
| 142 |
|
| 143 |
--let $wait_condition = SELECT COUNT(*)=1 FROM performance_schema.replication_group_members WHERE MEMBER_ID = "$server2_uuid" AND MEMBER_ROLE = 'PRIMARY' |
| 144 |
--source include/wait_condition.inc |
| 145 |
|
| 146 |
# Verify preferred and active members of member 2 |
| 147 |
--let $assert_text = The second server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 148 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server2_uuid" |
| 149 |
--source include/assert.inc |
| 150 |
--let $assert_text = The second server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 151 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server2_uuid" |
| 152 |
--source include/assert.inc |
| 153 |
|
| 154 |
# Verify preferred and active members of member 1 |
| 155 |
--let $rpl_connection_name= server1 |
| 156 |
--source include/rpl_connection.inc |
| 157 |
--let $assert_text = The second server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 158 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server2_uuid" |
| 159 |
--source include/assert.inc |
| 160 |
--let $assert_text = The second server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 161 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server2_uuid" |
| 162 |
--source include/assert.inc |
| 163 |
|
| 164 |
# Verify preferred and active members of member 3 |
| 165 |
--let $rpl_connection_name= server3 |
| 166 |
--source include/rpl_connection.inc |
| 167 |
--let $assert_text = The second server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 168 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server2_uuid" |
| 169 |
--source include/assert.inc |
| 170 |
--let $assert_text = The second server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 171 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server2_uuid" |
| 172 |
--source include/assert.inc |
| 173 |
|
| 174 |
# Elect member 3 |
| 175 |
--let $rpl_connection_name= server3 |
| 176 |
--source include/rpl_connection.inc |
| 177 |
--let $server3_uuid = `SELECT @@server_uuid` |
| 178 |
|
| 179 |
--eval SELECT group_replication_switch_to_multi_primary_mode() |
| 180 |
--replace_result $server3_uuid MEMBER3_UUID |
| 181 |
--eval SELECT group_replication_switch_to_single_primary_mode("$server3_uuid") |
| 182 |
|
| 183 |
--let $wait_condition = SELECT COUNT(*)=1 FROM performance_schema.replication_group_members WHERE MEMBER_ID = "$server3_uuid" AND MEMBER_ROLE = 'PRIMARY' |
| 184 |
--source include/wait_condition.inc |
| 185 |
|
| 186 |
# Verify preferred and active members of member 3 |
| 187 |
--let $assert_text = The third server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 188 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server3_uuid" |
| 189 |
--source include/assert.inc |
| 190 |
--let $assert_text = The third server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 191 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server3_uuid" |
| 192 |
--source include/assert.inc |
| 193 |
|
| 194 |
# Verify preferred and active members of member 1 |
| 195 |
--let $rpl_connection_name= server1 |
| 196 |
--source include/rpl_connection.inc |
| 197 |
--let $assert_text = The third server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 198 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server3_uuid" |
| 199 |
--source include/assert.inc |
| 200 |
--let $assert_text = The third server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 201 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server3_uuid" |
| 202 |
--source include/assert.inc |
| 203 |
|
| 204 |
# Verify preferred and active members of member 2 |
| 205 |
--let $rpl_connection_name= server2 |
| 206 |
--source include/rpl_connection.inc |
| 207 |
--let $assert_text = The third server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 208 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_PREFERRED from performance_schema.replication_group_communication_information]" = "$server3_uuid" |
| 209 |
--source include/assert.inc |
| 210 |
--let $assert_text = The third server's UUID should be the only UUID in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 211 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_LEADERS_ACTUAL from performance_schema.replication_group_communication_information]" = "$server3_uuid" |
| 212 |
--source include/assert.inc |
| 213 |
|
| 214 |
--echo |
| 215 |
--echo #### |
| 216 |
--echo # 2) Change the communication protocol to 8.0.21. Must restart the group. |
| 217 |
--echo #### |
| 218 |
--echo |
| 219 |
|
| 220 |
--let $rpl_connection_name= server3 |
| 221 |
--source include/rpl_connection.inc |
| 222 |
|
| 223 |
--source include/stop_group_replication.inc |
| 224 |
--eval SET GLOBAL group_replication_paxos_single_leader = "OFF" |
| 225 |
|
| 226 |
--let $rpl_connection_name= server2 |
| 227 |
--source include/rpl_connection.inc |
| 228 |
|
| 229 |
--source include/stop_group_replication.inc |
| 230 |
--eval SET GLOBAL group_replication_paxos_single_leader = "OFF" |
| 231 |
|
| 232 |
--let $rpl_connection_name= server1 |
| 233 |
--source include/rpl_connection.inc |
| 234 |
|
| 235 |
--source include/stop_group_replication.inc |
| 236 |
--eval SET GLOBAL group_replication_paxos_single_leader = "OFF" |
| 237 |
|
| 238 |
--source include/start_and_bootstrap_group_replication.inc |
| 239 |
|
| 240 |
--let $rpl_connection_name= server2 |
| 241 |
--source include/rpl_connection.inc |
| 242 |
|
| 243 |
--source include/start_group_replication.inc |
| 244 |
|
| 245 |
--let $rpl_connection_name= server3 |
| 246 |
--source include/rpl_connection.inc |
| 247 |
|
| 248 |
--source include/start_group_replication.inc |
| 249 |
|
| 250 |
--let $rpl_connection_name= server2 |
| 251 |
--source include/rpl_connection.inc |
| 252 |
|
| 253 |
--eval SELECT group_replication_set_communication_protocol("8.0.21") |
| 254 |
|
| 255 |
--echo |
| 256 |
--echo #### |
| 257 |
--echo # 3) Switch to SPM on every member. For each member that was elected as |
| 258 |
--echo # primary in SPM the WRITE_CONSENSUS_LEADERS_MEMBER_ID_PREFERRED and |
| 259 |
--echo # WRITE_CONSENSUS_LEADERS_MEMBER_ID_ACTIVE fields of the |
| 260 |
--echo # performance_schema.replication_group_communication_information PFS |
| 261 |
--echo # table should contain the UUIDs of *all* the members in the group. |
| 262 |
--echo #### |
| 263 |
--echo |
| 264 |
|
| 265 |
# Elect member 1 |
| 266 |
--let $rpl_connection_name= server1 |
| 267 |
--source include/rpl_connection.inc |
| 268 |
|
| 269 |
# Wait until the communication protocol change is effective on this member, |
| 270 |
# only one group action can run at a time. |
| 271 |
# When changing to 8.0.21, the protocol will change to 8.0.16. |
| 272 |
--let $wait_condition = SELECT COUNT(*)=1 FROM performance_schema.replication_group_communication_information WHERE PROTOCOL_VERSION = '8.0.16' |
| 273 |
--source include/wait_condition_or_abort.inc |
| 274 |
|
| 275 |
--eval SELECT group_replication_switch_to_multi_primary_mode() |
| 276 |
--replace_result $server1_uuid MEMBER1_UUID |
| 277 |
--eval SELECT group_replication_switch_to_single_primary_mode("$server1_uuid") |
| 278 |
|
| 279 |
--let $wait_condition = SELECT COUNT(*)=1 FROM performance_schema.replication_group_members WHERE MEMBER_ID = "$server1_uuid" AND MEMBER_ROLE = 'PRIMARY' |
| 280 |
--source include/wait_condition.inc |
| 281 |
|
| 282 |
# Verify preferred and active members of member 1 |
| 283 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 284 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 285 |
--let $assert_cond = "$num_rows" = "1" |
| 286 |
--source include/assert.inc |
| 287 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 288 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 289 |
--let $assert_cond = "$num_rows" = "1" |
| 290 |
--source include/assert.inc |
| 291 |
--let $assert_text = Single Leader must be disabled |
| 292 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_SINGLE_LEADER_CAPABLE from performance_schema.replication_group_communication_information]" = "0" |
| 293 |
--source include/assert.inc |
| 294 |
|
| 295 |
# Verify preferred and active members of member 2 |
| 296 |
--let $rpl_connection_name= server2 |
| 297 |
--source include/rpl_connection.inc |
| 298 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 299 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 300 |
--let $assert_cond = "$num_rows" = "1" |
| 301 |
--source include/assert.inc |
| 302 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 303 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 304 |
--let $assert_cond = "$num_rows" = "1" |
| 305 |
--source include/assert.inc |
| 306 |
--let $assert_text = Single Leader must be disabled |
| 307 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_SINGLE_LEADER_CAPABLE from performance_schema.replication_group_communication_information]" = "0" |
| 308 |
--source include/assert.inc |
| 309 |
|
| 310 |
# Verify preferred and active members of member 3 |
| 311 |
--let $rpl_connection_name= server3 |
| 312 |
--source include/rpl_connection.inc |
| 313 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 314 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 315 |
--let $assert_cond = "$num_rows" = "1" |
| 316 |
--source include/assert.inc |
| 317 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 318 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 319 |
--let $assert_cond = "$num_rows" = "1" |
| 320 |
--source include/assert.inc |
| 321 |
--let $assert_text = Single Leader must be disabled |
| 322 |
--let $assert_cond = "[SELECT WRITE_CONSENSUS_SINGLE_LEADER_CAPABLE from performance_schema.replication_group_communication_information]" = "0" |
| 323 |
--source include/assert.inc |
| 324 |
|
| 325 |
# Elect member 2 |
| 326 |
--let $rpl_connection_name= server2 |
| 327 |
--source include/rpl_connection.inc |
| 328 |
--let $server2_uuid = `SELECT @@server_uuid` |
| 329 |
|
| 330 |
--eval SELECT group_replication_switch_to_multi_primary_mode() |
| 331 |
--replace_result $server2_uuid MEMBER2_UUID |
| 332 |
--eval SELECT group_replication_switch_to_single_primary_mode("$server2_uuid") |
| 333 |
|
| 334 |
--let $wait_condition = SELECT COUNT(*)=1 FROM performance_schema.replication_group_members WHERE MEMBER_ID = "$server2_uuid" AND MEMBER_ROLE = 'PRIMARY' |
| 335 |
--source include/wait_condition.inc |
| 336 |
|
| 337 |
# Verify preferred and active members of member 2 |
| 338 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 339 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 340 |
--let $assert_cond = "$num_rows" = "1" |
| 341 |
--source include/assert.inc |
| 342 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 343 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 344 |
--let $assert_cond = "$num_rows" = "1" |
| 345 |
--source include/assert.inc |
| 346 |
|
| 347 |
# Verify preferred and active members of member 1 |
| 348 |
--let $rpl_connection_name= server1 |
| 349 |
--source include/rpl_connection.inc |
| 350 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 351 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 352 |
--let $assert_cond = "$num_rows" = "1" |
| 353 |
--source include/assert.inc |
| 354 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 355 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 356 |
--let $assert_cond = "$num_rows" = "1" |
| 357 |
--source include/assert.inc |
| 358 |
|
| 359 |
# Verify preferred and active members of member 3 |
| 360 |
--let $rpl_connection_name= server3 |
| 361 |
--source include/rpl_connection.inc |
| 362 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 363 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 364 |
--let $assert_cond = "$num_rows" = "1" |
| 365 |
--source include/assert.inc |
| 366 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 367 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 368 |
--let $assert_cond = "$num_rows" = "1" |
| 369 |
--source include/assert.inc |
| 370 |
|
| 371 |
# Elect member 3 |
| 372 |
--let $rpl_connection_name= server3 |
| 373 |
--source include/rpl_connection.inc |
| 374 |
--let $server3_uuid = `SELECT @@server_uuid` |
| 375 |
|
| 376 |
--eval SELECT group_replication_switch_to_multi_primary_mode() |
| 377 |
--replace_result $server3_uuid MEMBER3_UUID |
| 378 |
--eval SELECT group_replication_switch_to_single_primary_mode("$server3_uuid") |
| 379 |
|
| 380 |
--let $wait_condition = SELECT COUNT(*)=1 FROM performance_schema.replication_group_members WHERE MEMBER_ID = "$server3_uuid" AND MEMBER_ROLE = 'PRIMARY' |
| 381 |
--source include/wait_condition.inc |
| 382 |
|
| 383 |
# Verify preferred and active members of member 3 |
| 384 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 385 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 386 |
--let $assert_cond = "$num_rows" = "1" |
| 387 |
--source include/assert.inc |
| 388 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 389 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 390 |
--let $assert_cond = "$num_rows" = "1" |
| 391 |
--source include/assert.inc |
| 392 |
|
| 393 |
# Verify preferred and active members of member 1 |
| 394 |
--let $rpl_connection_name= server1 |
| 395 |
--source include/rpl_connection.inc |
| 396 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 397 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 398 |
--let $assert_cond = "$num_rows" = "1" |
| 399 |
--source include/assert.inc |
| 400 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 401 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 402 |
--let $assert_cond = "$num_rows" = "1" |
| 403 |
--source include/assert.inc |
| 404 |
|
| 405 |
# Verify preferred and active members of member 2 |
| 406 |
--let $rpl_connection_name= server2 |
| 407 |
--source include/rpl_connection.inc |
| 408 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_PREFERRED |
| 409 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_PREFERRED LIKE '%$server3_uuid%'` |
| 410 |
--let $assert_cond = "$num_rows" = "1" |
| 411 |
--source include/assert.inc |
| 412 |
--let $assert_text = All members should be in WRITE_CONSENSUS_LEADERS_ACTUAL |
| 413 |
--let $num_rows = `SELECT COUNT(*) FROM performance_schema.replication_group_communication_information WHERE WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server1_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server2_uuid%' AND WRITE_CONSENSUS_LEADERS_ACTUAL LIKE '%$server3_uuid%'` |
| 414 |
--let $assert_cond = "$num_rows" = "1" |
| 415 |
--source include/assert.inc |
| 416 |
|
| 417 |
--echo |
| 418 |
--echo #### |
| 419 |
--echo # 4) Cleanup. |
| 420 |
--echo #### |
| 421 |
--echo |
| 422 |
|
| 423 |
--let $rpl_connection_name= server3 |
| 424 |
--source include/rpl_connection.inc |
| 425 |
--eval SET GLOBAL group_replication_paxos_single_leader = "ON" |
| 426 |
|
| 427 |
--let $rpl_connection_name= server2 |
| 428 |
--source include/rpl_connection.inc |
| 429 |
--eval SET GLOBAL group_replication_paxos_single_leader = "ON" |
| 430 |
|
| 431 |
--let $rpl_connection_name= server1 |
| 432 |
--source include/rpl_connection.inc |
| 433 |
--eval SET GLOBAL group_replication_paxos_single_leader = "ON" |
| 434 |
|
| 435 |
--let $rpl_connection_name= server1 |
| 436 |
--source include/rpl_connection.inc |
| 437 |
--source include/stop_group_replication.inc |
| 438 |
--let $rpl_group_replication_single_primary_mode=1 |
| 439 |
--let $rpl_group_replication_reset_persistent_vars=1 |
| 440 |
--source include/group_replication_end.inc |