| 1 |
################################################################################ |
| 2 |
# Validate group_replication_consistency= 'AFTER' behaviour against member leaves, |
| 3 |
# when a member leaves before any member acknowledges the prepare. |
| 4 |
# |
| 5 |
# Test: |
| 6 |
# 00. The test requires three servers: M1, M2 and M3. |
| 7 |
# 01. Create a table on the group. |
| 8 |
# 02. Make server2 block before send its prepare message. This |
| 9 |
# will allow us to deterministically remove server3 before |
| 10 |
# any member send its acknowledge. |
| 11 |
# 03. Make server3 block before send its prepare message. This |
| 12 |
# will allow us to deterministically remove it from the |
| 13 |
# group while others are waiting for its acknowledge. |
| 14 |
# The not acknowledged transaction must rollback on server3. |
| 15 |
# 04. Execute T1 on server1. |
| 16 |
# 05. Wait until T1 is prepared on server2. |
| 17 |
# 06. Wait until T1 is prepared on server3. |
| 18 |
# 07. Make server3 do not send its prepare message and remove |
| 19 |
# it from the group. |
| 20 |
# 08. Make server2 resume and send its prepare message. |
| 21 |
# 09. Wait until server3 is removed from the group. T1 will |
| 22 |
# commit on server 1 and 2. |
| 23 |
# 10. Clean up. |
| 24 |
################################################################################ |
| 25 |
--source include/big_test.inc |
| 26 |
--source include/have_debug_sync.inc |
| 27 |
--source include/have_group_replication_plugin.inc |
| 28 |
--let $rpl_server_count= 3 |
| 29 |
--source include/group_replication.inc |
| 30 |
|
| 31 |
--echo |
| 32 |
--echo ############################################################ |
| 33 |
--echo # 01. Create a table on the group. |
| 34 |
--let $rpl_connection_name= server1 |
| 35 |
--source include/rpl_connection.inc |
| 36 |
CREATE TABLE t1 (c1 INT NOT NULL PRIMARY KEY); |
| 37 |
|
| 38 |
|
| 39 |
--echo |
| 40 |
--echo ############################################################ |
| 41 |
--echo # 02. Make server2 block before send its prepare message. This |
| 42 |
--echo # will allow us to deterministically remove server3 before |
| 43 |
--echo # any member send its acknowledge. |
| 44 |
--let $rpl_connection_name= server2 |
| 45 |
--source include/rpl_connection.inc |
| 46 |
SET @@GLOBAL.DEBUG= '+d,group_replication_wait_before_message_send_after_applier_prepare'; |
| 47 |
|
| 48 |
|
| 49 |
--echo |
| 50 |
--echo ############################################################ |
| 51 |
--echo # 03. Make server3 block before send its prepare message. This |
| 52 |
--echo # will allow us to deterministically remove it from the |
| 53 |
--echo # group while others are waiting for its acknowledge. |
| 54 |
--echo # The not acknowledged transaction must rollback on server3. |
| 55 |
--let $rpl_connection_name= server3 |
| 56 |
--source include/rpl_connection.inc |
| 57 |
SET @@GLOBAL.DEBUG= '+d,group_replication_wait_on_supress_message_send_after_applier_prepare'; |
| 58 |
|
| 59 |
SET SESSION sql_log_bin= 0; |
| 60 |
call mtr.add_suppression("Due to a plugin error, some transactions were unable to be certified and will now rollback."); |
| 61 |
call mtr.add_suppression("Plugin group_replication reported: 'Error on transaction '.*:5' from session '.*' while waiting for being prepared on all group members."); |
| 62 |
call mtr.add_suppression("Run function 'before_commit' in plugin 'group_replication' failed"); |
| 63 |
call mtr.add_suppression("Replica: Error on observer while running replication hook 'before_commit'. Error_code: MY-003100"); |
| 64 |
call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Error in Xid_log_event: Commit could not be completed, 'Error on observer while running replication hook 'before_commit'.', Error_code: MY-003100"); |
| 65 |
call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': Worker 1 failed executing transaction '.*:5'; Error on observer while running replication hook 'before_commit'. Error_code: MY-003100"); |
| 66 |
call mtr.add_suppression("Replica SQL for channel 'group_replication_applier': ... The replica coordinator and worker threads are stopped.*"); |
| 67 |
call mtr.add_suppression("The applier thread execution was aborted. Unable to process more transactions, this member will now leave the group."); |
| 68 |
call mtr.add_suppression("Fatal error during execution on the Applier process of Group Replication. The server will now leave the group."); |
| 69 |
call mtr.add_suppression("Plugin group_replication reported: 'Skipping leave operation: concurrent attempt to leave the group is on-going."); |
| 70 |
call mtr.add_suppression("The server was automatically set into read only mode after an error was detected."); |
| 71 |
SET SESSION sql_log_bin= 1; |
| 72 |
|
| 73 |
|
| 74 |
--echo |
| 75 |
--echo ############################################################ |
| 76 |
--echo # 04. Execute T1 on server1. |
| 77 |
--let $rpl_connection_name= server1 |
| 78 |
--source include/rpl_connection.inc |
| 79 |
--send INSERT INTO t1 VALUES (1) |
| 80 |
|
| 81 |
|
| 82 |
--echo |
| 83 |
--echo ############################################################ |
| 84 |
--echo # 05. Wait until T1 is prepared on server2. |
| 85 |
--let $rpl_connection_name= server2 |
| 86 |
--source include/rpl_connection.inc |
| 87 |
# Wait for the debug sync to be reached. |
| 88 |
SET DEBUG_SYNC= "now WAIT_FOR signal.after_before_message_send_after_applier_prepare_waiting"; |
| 89 |
|
| 90 |
|
| 91 |
--echo |
| 92 |
--echo ############################################################ |
| 93 |
--echo # 06. Wait until T1 is prepared on server3. |
| 94 |
--let $rpl_connection_name= server3 |
| 95 |
--source include/rpl_connection.inc |
| 96 |
# Wait for the debug sync to be reached. |
| 97 |
SET DEBUG_SYNC= "now WAIT_FOR signal.after_supress_message_send_after_applier_prepare_waiting"; |
| 98 |
|
| 99 |
|
| 100 |
--echo |
| 101 |
--echo ############################################################ |
| 102 |
--echo # 07. Make server3 do not send its prepare message and remove |
| 103 |
--echo # it from the group. |
| 104 |
--let $rpl_connection_name= server3 |
| 105 |
--source include/rpl_connection.inc |
| 106 |
# Signal debug sync to continue. |
| 107 |
SET DEBUG_SYNC= 'now SIGNAL signal.after_supress_message_send_after_applier_prepare_continue'; |
| 108 |
SET @@GLOBAL.DEBUG= '-d,group_replication_wait_on_supress_message_send_after_applier_prepare'; |
| 109 |
|
| 110 |
--source include/stop_group_replication.inc |
| 111 |
|
| 112 |
--let $assert_text= 'There are no values in table t1' |
| 113 |
--let $assert_cond= [SELECT COUNT(*) AS count FROM t1, count, 1] = 0 |
| 114 |
--source include/assert.inc |
| 115 |
|
| 116 |
|
| 117 |
--echo |
| 118 |
--echo ############################################################ |
| 119 |
--echo # 08. Make server2 resume and send its prepare message. |
| 120 |
--let $rpl_connection_name= server2 |
| 121 |
--source include/rpl_connection.inc |
| 122 |
# Signal debug sync to continue. |
| 123 |
SET DEBUG_SYNC= 'now SIGNAL signal.after_before_message_send_after_applier_prepare_continue'; |
| 124 |
SET @@GLOBAL.DEBUG= '-d,group_replication_wait_before_message_send_after_applier_prepare'; |
| 125 |
|
| 126 |
|
| 127 |
--echo |
| 128 |
--echo ############################################################ |
| 129 |
--echo # 09. Wait until server3 is removed from the group. T1 will |
| 130 |
--echo # commit on server 1 and 2. |
| 131 |
--let $rpl_connection_name= server_1 |
| 132 |
--source include/rpl_connection.inc |
| 133 |
--let $group_replication_number_of_members= 2 |
| 134 |
--source include/gr_wait_for_number_of_members.inc |
| 135 |
|
| 136 |
--let $rpl_connection_name= server1 |
| 137 |
--source include/rpl_connection.inc |
| 138 |
--reap |
| 139 |
|
| 140 |
--let $assert_text= 'There is 1 value in table t1' |
| 141 |
--let $assert_cond= [SELECT COUNT(*) AS count FROM t1 WHERE c1=1, count, 1] = 1 |
| 142 |
--source include/assert.inc |
| 143 |
|
| 144 |
--let $rpl_connection_name= server2 |
| 145 |
--source include/rpl_connection.inc |
| 146 |
--let $assert_text= 'There is 1 value in table t1' |
| 147 |
--let $assert_cond= [SELECT COUNT(*) AS count FROM t1 WHERE c1=1, count, 1] = 1 |
| 148 |
--source include/assert.inc |
| 149 |
|
| 150 |
--let $diff_tables=server1:t1, server2:t1 |
| 151 |
--source include/diff_tables.inc |
| 152 |
|
| 153 |
|
| 154 |
--echo |
| 155 |
--echo ############################################################ |
| 156 |
--echo # 10. Clean up. |
| 157 |
--let $rpl_connection_name= server1 |
| 158 |
--source include/rpl_connection.inc |
| 159 |
DROP TABLE t1; |
| 160 |
|
| 161 |
--let $rpl_connection_name= server3 |
| 162 |
--source include/rpl_connection.inc |
| 163 |
DROP TABLE t1; |
| 164 |
|
| 165 |
--source include/group_replication_end.inc |