| 1 |
.TH HFSC 8 "31 October 2011" iproute2 Linux |
| 2 |
. |
| 3 |
.SH NAME |
| 4 |
HFSC \- Hierarchical Fair Service Curve's control under linux |
| 5 |
. |
| 6 |
.SH SYNOPSIS |
| 7 |
.nf |
| 8 |
tc qdisc add ... hfsc [ \fBdefault\fR CLASSID ] |
| 9 |
|
| 10 |
tc class add ... hfsc [ [ \fBrt\fR SC ] [ \fBls\fR SC ] | [ \fBsc\fR SC ] ] [ \fBul\fR SC ] |
| 11 |
|
| 12 |
\fBrt\fR : realtime service curve |
| 13 |
\fBls\fR : linkshare service curve |
| 14 |
\fBsc\fR : rt+ls service curve |
| 15 |
\fBul\fR : upperlimit service curve |
| 16 |
|
| 17 |
\(bu at least one of \fBrt\fR, \fBls\fR or \fBsc\fR must be specified |
| 18 |
\(bu \fBul\fR can only be specified with \fBls\fR or \fBsc\fR |
| 19 |
. |
| 20 |
.IP "SC := [ [ \fBm1\fR BPS ] \fBd\fR SEC ] \fBm2\fR BPS" |
| 21 |
\fBm1\fR : slope of the first segment |
| 22 |
\fBd\fR : x\-coordinate of intersection |
| 23 |
\fBm2\fR : slope of the second segment |
| 24 |
.PP |
| 25 |
.IP "SC := [ [ \fBumax\fR BYTE ] \fBdmax\fR SEC ] \fBrate\fR BPS" |
| 26 |
\fBumax\fR : maximum unit of work |
| 27 |
\fBdmax\fR : maximum delay |
| 28 |
\fBrate\fR : rate |
| 29 |
.PP |
| 30 |
.fi |
| 31 |
For description of BYTE, BPS and SEC \- please see \fBUNITS\fR |
| 32 |
section of \fBtc\fR(8). |
| 33 |
. |
| 34 |
.SH DESCRIPTION (qdisc) |
| 35 |
HFSC qdisc has only one optional parameter \- \fBdefault\fR. CLASSID specifies |
| 36 |
the minor part of the default classid, where packets not classified by other |
| 37 |
means (e.g. u32 filter, CLASSIFY target of iptables) will be enqueued. If |
| 38 |
\fBdefault\fR is not specified, unclassified packets will be dropped. |
| 39 |
. |
| 40 |
.SH DESCRIPTION (class) |
| 41 |
HFSC class is used to create a class hierarchy for HFSC scheduler. For |
| 42 |
explanation of the algorithm, and the meaning behind \fBrt\fR, \fBls\fR, |
| 43 |
\fBsc\fR and \fBul\fR service curves \- please refer to \fBtc\-hfsc\fR(7). |
| 44 |
|
| 45 |
As you can see in \fBSYNOPSIS\fR, service curve (SC) can be specified in two |
| 46 |
ways. Either as maximum delay for certain amount of work, or as a bandwidth |
| 47 |
assigned for certain amount of time. Obviously, \fBm1\fR is simply |
| 48 |
\fBumax\fR/\fBdmax\fR. |
| 49 |
|
| 50 |
Both \fBm2\fR and \fBrate\fR are mandatory. If you omit other |
| 51 |
parameters, you will specify linear service curve. |
| 52 |
. |
| 53 |
.SH "SEE ALSO" |
| 54 |
. |
| 55 |
\fBtc\fR(8), \fBtc\-hfsc\fR(7), \fBtc\-stab\fR(8) |
| 56 |
|
| 57 |
Please direct bugreports and patches to: <[email protected]> |
| 58 |
. |
| 59 |
.SH "AUTHOR" |
| 60 |
. |
| 61 |
Manpage created by Michal Soltys ([email protected]) |