| 1 |
.TH SLATTACH 8 "2011\-12\-31" "net\-tools" "Linux System Administrator's Manual" |
| 2 |
.SH NAME |
| 3 |
slattach \- attach a network interface to a serial line |
| 4 |
.SH SYNOPSIS |
| 5 |
.B "slattach [\-dehlLmnqv] [\-c command] [\-p proto] [\-s speed] [tty]" |
| 6 |
.br |
| 7 |
.SH DESCRIPTION |
| 8 |
.B Slattach |
| 9 |
is a tiny little program that can be used to put a normal terminal |
| 10 |
("serial") line into one of several "network" modes, thus allowing |
| 11 |
you to use it for point-to-point links to other computers. |
| 12 |
.SH OPTIONS |
| 13 |
.TP |
| 14 |
.B tty |
| 15 |
Path to a serial device like |
| 16 |
.IR /dev/ttyS* ", " /dev/cua* " or " /dev/ptmx |
| 17 |
to spawn a new pseudo tty. |
| 18 |
.TP |
| 19 |
.B "[\-c command]" |
| 20 |
Execute |
| 21 |
.B command |
| 22 |
when the line is hung up. This can be used to run scripts or re-establish |
| 23 |
connections when a link goes down. |
| 24 |
.TP |
| 25 |
.B "[\-d]" |
| 26 |
Enable debugging output. Useful when determining why a given |
| 27 |
setup doesn't work. |
| 28 |
.TP |
| 29 |
.B "[\-h]" |
| 30 |
Exit when the carrier is lost. This works on both /dev/tty and /dev/cua |
| 31 |
devices by directly monitoring the carrier status every 15 seconds. |
| 32 |
.TP |
| 33 |
.B "[\-v]" |
| 34 |
Enable verbose output. Useful in shell scripts. |
| 35 |
.TP |
| 36 |
.B "[\-q]" |
| 37 |
Operate in quiet mode - no messages at all. |
| 38 |
.TP |
| 39 |
.B "[\-l]" |
| 40 |
Create an UUCP-style lockfile for the device in /var/lock. |
| 41 |
.TP |
| 42 |
.B "[\-n]" |
| 43 |
Equivalent to the "mesg n" command. |
| 44 |
.TP |
| 45 |
.B "[\-m]" |
| 46 |
Do \fBnot\fP initialize the line into 8 bits raw mode. |
| 47 |
.TP |
| 48 |
.B "[\-e]" |
| 49 |
Exit right after initializing device, instead of waiting for the |
| 50 |
line to hang up. |
| 51 |
.TP |
| 52 |
.B "[\-L]" |
| 53 |
Enable 3 wire operation. The terminal is moved into CLOCAL mode, |
| 54 |
carrier watching is disabled. |
| 55 |
.TP |
| 56 |
.B "[\-p proto]" |
| 57 |
Set a specific kind of protocol to use on the line. The default |
| 58 |
is set to |
| 59 |
.BR "cslip" , |
| 60 |
i.e. compressed SLIP. Other possible values are |
| 61 |
.B "slip" |
| 62 |
(normal SLIP), |
| 63 |
.B "adaptive" |
| 64 |
(adaptive CSLIP/SLIP), |
| 65 |
.B "ppp" |
| 66 |
(Point-to-Point Protocol) |
| 67 |
and |
| 68 |
.B "kiss" |
| 69 |
(a protocol used for communicating with AX.25 packet radio terminal node controllers). |
| 70 |
The special argument |
| 71 |
.B "tty" |
| 72 |
can be used to put the device back into normal serial operation. |
| 73 |
Using 'ppp' mode is not normally useful as ppp requires an additional ppp daemon |
| 74 |
.B pppd |
| 75 |
to be active on the line. For kiss connections the |
| 76 |
.B kissattach |
| 77 |
program should be used. |
| 78 |
.TP |
| 79 |
.B "[\-s speed]" |
| 80 |
Set a specific line speed, other than the default. |
| 81 |
.PP |
| 82 |
If no arguments are given, the current terminal line (usually: the |
| 83 |
login device) is used. Otherwise, an attempt is made to claim the |
| 84 |
indicated terminal port, lock it, and open it. |
| 85 |
.SH FILES |
| 86 |
.I /dev/cua* /var/lock/LCK.* /dev/ttyS* /dev/ptmx |
| 87 |
.SH BUGS |
| 88 |
None known. |
| 89 |
.SH SEE ALSO |
| 90 |
.BR kissattach (8), |
| 91 |
.BR dip (8), |
| 92 |
.BR pppd (8), |
| 93 |
.BR sliplogin (8) |
| 94 |
.SH AUTHORS |
| 95 |
Fred N. van Kempen, <[email protected]> |
| 96 |
.br |
| 97 |
Alan Cox, <[email protected]> |
| 98 |
.br |
| 99 |
Miquel van Smoorenburg, <[email protected]> |
| 100 |
.br |
| 101 |
George Shearer, <[email protected]> |
| 102 |
.br |
| 103 |
Yossi Gottlieb, <[email protected]> |
| 104 |
.br |